ENS 51206: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by Mark Hawes) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 16: | Line 16: | ||
| event date = 07/07/2015 CDT | | event date = 07/07/2015 CDT | ||
| last update date = 08/10/2015 | | last update date = 08/10/2015 | ||
| title = Part 21 Interim Report - Notification | | title = Part 21 Interim Report - Notification of Pressure Seal Valve Yoke Material Compliance | ||
| event text = The following information was received via fax: | | event text = The following information was received via fax: | ||
This letter provides interim notification of Crane Nuclear's investigation into ASME Boiler and Pressure Vessel [B&PV] Section Ill Code design Pressure Seal Valve orders for yokes with integral hubs acting as retaining rings. The information required for this notification is provided below: | This letter provides interim notification of Crane Nuclear's investigation into ASME Boiler and Pressure Vessel [B&PV] Section Ill Code design Pressure Seal Valve orders for yokes with integral hubs acting as retaining rings. The information required for this notification is provided below: |
Latest revision as of 21:47, 1 March 2018
ENS Event | |
---|---|
05:00 Jul 7, 2015 | |
Title | Part 21 Interim Report - Notification of Pressure Seal Valve Yoke Material Compliance |
Event Description | {{#Wiki_filter:The following information was received via fax:
This letter provides interim notification of Crane Nuclear's investigation into ASME Boiler and Pressure Vessel [B&PV] Section Ill Code design Pressure Seal Valve orders for yokes with integral hubs acting as retaining rings. The information required for this notification is provided below: (i) Name and address of the individual or individuals informing the Commission. Jason Klein Sustaining Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (ii) Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect This is an interim report. Crane Nuclear is currently investigating Pressure Seal Valve orders potentially having misclassified material and non-destructive examination requirements for Yokes with integral hub retaining ring designs. The material requirements are specified per Crane Procedure 03-107 which utilizes ASME B&PV Code Case N-62-7 as guidance for material classification. (iii) Identification of the firm supplying the basic component which fails to comply or contains a defect. Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defect or failure to comply. Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, is guidance for appropriate material and NDE requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62-7. A yoke incorporating a threaded hub should be treated in the same manner as a threaded retaining ring requiring the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62-7). Yokes with integral hubs acting as retaining rings may have been processed to material requirements without required CNI Classification per Procedure 03-107. (v) The date on which the information of such defect or failure to comply was obtained. Crane Nuclear Engineering initiated investigation correspondence to Crane Nuclear Director of Safety and Quality via email correspondence dated Feb 20th, 2015. (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more facilities or activities subject to the regulations in this part. Crane has yet to determine the extent of Pressure Seal Valve designs sales order numbers (SO#) affected prior to 2001; the following Utility and Sites were supplied non-compliant CNI Procedure 03-107 Classification yokes for the following valve assemblies: 1. CNI SO# 24237-01, TVA, Browns Ferry, P.O. 00031943 - Quantity shipped = 1, Chapman, 8 [inch], Figure L953, Class 900, ASME Class 2, 95 Ed., 96 Add., no N stamp 2. CNI SO# 39501�01, Georgia Power, Hatch, P.O. SNG10016537 - Quantity shipped = 3, Crane, 3 [inch], Figure 776U, Class 600, ASME Class 3, 71 Ed., W71 Add. 3. CNI SO# 39745-01, Southern California Edison, San Onofre, P .0. 4500456451 - Quantity Shipped = 1, Aloyco, 4 [inch], Figure N5247PSB, Class 900, ASME Class 3, 71 Ed., S73 Add. (vii) The corrective action which has been, is being, or will be taken; the name of the individual or organization responsible for the action; and the length of time that has been or will be taken to complete the action. Crane Nuclear has completed sales orders search of Pressure Seal Valve designs with integral retaining ring hubs from 2001 to present identifying a total of 25 orders where three orders are impacted, as identified in part iv of this report (see above). Crane Nuclear is currently investigating sales orders previous to 2001, which will require an additional 30 days to complete (estimated completion date, August 6th, 2015). Corrective action by Crane Nuclear is to review documentation of supplied material to determine if yokes can be recertified as currently supplied. A revision to Crane Nuclear Procedure 03-107 to add figures reflecting configurations, and clarify classifications with applicable training, is in-process. (viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensees. Crane Nuclear is notifying sites affected and are developing a plan to address the valve items. (ix) In the case of an early site permit, the entities to whom an early site permit was transferred. Not applicable. Should you have any questions regarding this matter, please contact Jason Klein, Sustaining Engineering Manager at (630) 226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940.
The following excerpted information was received via fax: Crane Nuclear has completed the sales orders search of the ASME Section Ill Code Pressure Seal Valve designs with retaining rings from 1992 to present. Crane Nuclear identified a total of 112 orders that required review. Of these orders, two orders were supplied with non-compliant retaining ring material for the valve assemblies. The orders are as follows: 1. Walworth's Supplied Order #PP37653, Dominion, Millstone. 2. CNI SO# 32634-01, Dominion, Millstone. Corrective action being taken by Crane Nuclear is training held for engineers involved in classification of components, completed 8/10/15. Revise Procedure 03-107 to add figures reflecting configurations and clarify classifications 8/24/15. Revise assembly drawings to correct item identification as pressure retaining material, recertify ASTM material as ASME, and provide corrected documentation 8/28/15. Should you have any questions regarding this matter, please contact Jason Klein, Sustaining Engineering Manager at (630) 226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940. Notified R1DO (Powell), R2DO (Masters), R3DO (Orlikowski), R4DO (Hagar), and PART 21/50.55 REACTORS via email. }}[[Event description::Description::{{#Regex_clear:The following information was received via fax: This letter provides interim notification of Crane Nuclear's investigation into ASME Boiler and Pressure Vessel [B&PV] Section Ill Code design Pressure Seal Valve orders for yokes with integral hubs acting as retaining rings. The information required for this notification is provided below: (i) Name and address of the individual or individuals informing the Commission. Jason Klein Sustaining Engineering Manager Rosalie Nava Director Safety and Quality Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (ii) Identification of the basic component supplied for such facility or such activity within the United States which may fail to comply or contains a potential defect This is an interim report. Crane Nuclear is currently investigating Pressure Seal Valve orders potentially having misclassified material and non-destructive examination requirements for Yokes with integral hub retaining ring designs. The material requirements are specified per Crane Procedure 03-107 which utilizes ASME B&PV Code Case N-62-7 as guidance for material classification. (iii) Identification of the firm supplying the basic component which fails to comply or contains a defect. Crane Nuclear 860 Remington Blvd Bolingbrook, IL 60440 (iv) Nature of the defect or failure to comply and the safety hazard which is created or could be created by such defect or failure to comply. Crane Nuclear 'Classification of Valve Parts', Procedure 03-107, is guidance for appropriate material and NDE requirements for processing valve and valve part orders. The procedure is based on the ASME Code Case N-62-7. A yoke incorporating a threaded hub should be treated in the same manner as a threaded retaining ring requiring the material to be purchased Safety Related, ASME B&PV Section II, Part D materials, and required NDE (reference Category 3 valve items per N-62-7). Yokes with integral hubs acting as retaining rings may have been processed to material requirements without required CNI Classification per Procedure 03-107. (v) The date on which the information of such defect or failure to comply was obtained. Crane Nuclear Engineering initiated investigation correspondence to Crane Nuclear Director of Safety and Quality via email correspondence dated Feb 20th, 2015. (vi) In the case of a basic component which contains a defect or fails to comply, the number and location of these components in use at, supplied for, being supplied for, or may be supplied for, manufactured, or being manufactured for one or more facilities or activities subject to the regulations in this part. Crane has yet to determine the extent of Pressure Seal Valve designs sales order numbers (SO#) affected prior to 2001; the following Utility and Sites were supplied non-compliant CNI Procedure 03-107 Classification yokes for the following valve assemblies: 1. CNI SO# 24237-01, TVA, Browns Ferry, P.O. 00031943 - Quantity shipped = 1, Chapman, 8 [inch], Figure L953, Class 900, ASME Class 2, 95 Ed., 96 Add., no N stamp 2. CNI SO# 39501�01, Georgia Power, Hatch, P.O. SNG10016537 - Quantity shipped = 3, Crane, 3 [inch], Figure 776U, Class 600, ASME Class 3, 71 Ed., W71 Add. 3. CNI SO# 39745-01, Southern California Edison, San Onofre, P .0. 4500456451 - Quantity Shipped = 1, Aloyco, 4 [inch], Figure N5247PSB, Class 900, ASME Class 3, 71 Ed., S73 Add. (vii) The corrective action which has been, is being, or will be taken; the name of the individual or organization responsible for the action; and the length of time that has been or will be taken to complete the action. Crane Nuclear has completed sales orders search of Pressure Seal Valve designs with integral retaining ring hubs from 2001 to present identifying a total of 25 orders where three orders are impacted, as identified in part iv of this report (see above). Crane Nuclear is currently investigating sales orders previous to 2001, which will require an additional 30 days to complete (estimated completion date, August 6th, 2015). Corrective action by Crane Nuclear is to review documentation of supplied material to determine if yokes can be recertified as currently supplied. A revision to Crane Nuclear Procedure 03-107 to add figures reflecting configurations, and clarify classifications with applicable training, is in-process. (viii) Any advice related to the defect or failure to comply about the facility, activity, or basic component that has been, is being, or will be given to purchasers or licensees. Crane Nuclear is notifying sites affected and are developing a plan to address the valve items. (ix) In the case of an early site permit, the entities to whom an early site permit was transferred. Not applicable. Should you have any questions regarding this matter, please contact Jason Klein, Sustaining Engineering Manager at (630) 226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940.
The following excerpted information was received via fax: Crane Nuclear has completed the sales orders search of the ASME Section Ill Code Pressure Seal Valve designs with retaining rings from 1992 to present. Crane Nuclear identified a total of 112 orders that required review. Of these orders, two orders were supplied with non-compliant retaining ring material for the valve assemblies. The orders are as follows: 1. Walworth's Supplied Order #PP37653, Dominion, Millstone. 2. CNI SO# 32634-01, Dominion, Millstone. Corrective action being taken by Crane Nuclear is training held for engineers involved in classification of components, completed 8/10/15. Revise Procedure 03-107 to add figures reflecting configurations and clarify classifications 8/24/15. Revise assembly drawings to correct item identification as pressure retaining material, recertify ASTM material as ASME, and provide corrected documentation 8/28/15. Should you have any questions regarding this matter, please contact Jason Klein, Sustaining Engineering Manager at (630) 226-4953 or Rosalie Nava, Director of Safety and Quality at (630) 226-4940. Notified R1DO (Powell), R2DO (Masters), R3DO (Orlikowski), R4DO (Hagar), and PART 21/50.55 REACTORS via email. }}| ]] |
Where | |
---|---|
Crane Nuclear, Inc. Bolingbrook, Illinois (NRC Region 3) | |
Organization: | Crane Nuclear, Inc. |
Reporting | |
10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
Time - Person (Reporting Time:+26.82 h1.118 days <br />0.16 weeks <br />0.0367 months <br />) | |
Opened: | Jason Klein 07:49 Jul 8, 2015 |
NRC Officer: | Steve Sandin |
Last Updated: | Aug 10, 2015 |
51206 - NRC Website | |
Crane Nuclear, Inc. with 10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component | |
WEEKMONTHYEARENS 512062015-07-07T05:00:0007 July 2015 05:00:00
[Table view]10 CFR 21.21(a)(2), Interim Report for Comply or Defect in Component Part 21 Interim Report - Notification of Pressure Seal Valve Yoke Material Compliance 2015-07-07T05:00:00 | |