Inspection Manual Change Notice 21-036,: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot change)
(StriderTol Bot change)
 
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:NRC INSPECTION MANUAL DRO Change Notice 21-036
{{#Wiki_filter:Issue Date: 10/29/21 1
 
21-036 NRC INSPECTION MANUAL DRO Change Notice 21-036 DELETED:
DELETED: TRANSMITTED:
TRANSMITTED:
 
Number Date Number Date
Number Date Number Date
: 1. IMC 2810 10/11/12 IMC 2810 10/29/21
: 1.
: 2. IP 87129 09/15/03 IP 87129 10/29/21
IMC 2810 10/11/12 IMC 2810 10/29/21
: 3. TI 2201/005 07/03/14
: 2.
 
IP 87129 09/15/03 IP 87129 10/29/21
TRAINING: No special training is required for any documents issued with this Change Notice.
: 3.
 
TI 2201/005 07/03/14 TRAINING:
REMARKS: IMC 2810, Master Material License Oversight and Inspection Program, This was issued in October 2012. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents f or the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure had been revised. For example, the IMC 2800 that used by this Chapter has been updated in 2017 and again in 2020. Therefore, staff determined that some revisions beyond editorial changes are needed for this Chapter.
No special training is required for any documents issued with this Change Notice.
 
REMARKS:
IP 87129, Master Materials Program, This was issued in September 2003. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents f or the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure has been revised. For example, the IMC 2800 that used by this Inspection Procedures has been updated in 2017 and again in 2020.
IMC 2810, Master Material License Oversight and Inspection Program, This was issued in October 2012. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents for the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure had been revised. For example, the IMC 2800 that used by this Chapter has been updated in 2017 and again in 2020. Therefore, staff determined that some revisions beyond editorial changes are needed for this Chapter.
IP 87129, Master Materials Program, This was issued in September 2003. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents for the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure has been revised. For example, the IMC 2800 that used by this Inspection Procedures has been updated in 2017 and again in 2020.
Therefore, staff determined that some revisions beyond editorial changes are needed for this Inspection Procedures. This is a Major revision.
Therefore, staff determined that some revisions beyond editorial changes are needed for this Inspection Procedures. This is a Major revision.
TI 2201/005, Inspection of The Tennessee Valley Authority Watts Bar Nuclear Plant Unit 2, Implementation Of The Cyber Security Program Required by 10 CFR 73.54 and 10 CFR 73.55, Deletion reason: No longer in use.
TI 2201/005, Inspection of The Tennessee Valley Authority Watts Bar Nuclear Plant Unit 2, Implementation Of The Cyber Security Program Required by 10 CFR 73.54 and 10 CFR 73.55, Deletion reason: No longer in use.
Additionally, titles of certain Table of Contents (TOC) entries were corrected after an audit comparing the most recent document to the TOC. Changes are indicated in red font on the most recent TOC.
Additionally, titles of certain Table of Contents (TOC) entries were corrected after an audit comparing the most recent document to the TOC. Changes are indicated in red font on the most recent TOC.
EDITORIAL REVISIONS FROM PREVIOUS CHANGE NOTICES (As Required):
EDITORIAL REVISIONS FROM PREVIOUS CHANGE NOTICES (As Required):
DISTRIBUTION:
DISTRIBUTION:
Standard Official Use Only (OUO)-Security Related Information.
Standard Official Use Only (OUO)-Security Related Information.
Please contact: _______________ Phone: ________
Please contact: _______________ Phone: ________
 
END}}
END
 
Issue Date: 10/29/21 1 21-0 36}}

Latest revision as of 21:12, 27 November 2024

Inspection Manual Change Notice 21-036
ML21298A262
Person / Time
Issue date: 10/29/2021
From: Madeleine Arel
NRC/NRR/DRO/IRIB
To:
madeleine.arel@nrc.gov
Shared Package
ML21298A254 List:
References
CN 21-036
Download: ML21298A262 (1)


Text

Issue Date: 10/29/21 1

21-036 NRC INSPECTION MANUAL DRO Change Notice 21-036 DELETED:

TRANSMITTED:

Number Date Number Date

1.

IMC 2810 10/11/12 IMC 2810 10/29/21

2.

IP 87129 09/15/03 IP 87129 10/29/21

3.

TI 2201/005 07/03/14 TRAINING:

No special training is required for any documents issued with this Change Notice.

REMARKS:

IMC 2810, Master Material License Oversight and Inspection Program, This was issued in October 2012. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents for the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure had been revised. For example, the IMC 2800 that used by this Chapter has been updated in 2017 and again in 2020. Therefore, staff determined that some revisions beyond editorial changes are needed for this Chapter.

IP 87129, Master Materials Program, This was issued in September 2003. In accordance with IMC 0040, Preparing, Revising, And Issuing Documents for the NRC Inspection Manual, dated July 23, 2020, staff performed a periodic review of this Chapter, determined that time elapsed since documents were last revised, some policies and procedure has been revised. For example, the IMC 2800 that used by this Inspection Procedures has been updated in 2017 and again in 2020.

Therefore, staff determined that some revisions beyond editorial changes are needed for this Inspection Procedures. This is a Major revision.

TI 2201/005, Inspection of The Tennessee Valley Authority Watts Bar Nuclear Plant Unit 2, Implementation Of The Cyber Security Program Required by 10 CFR 73.54 and 10 CFR 73.55, Deletion reason: No longer in use.

Additionally, titles of certain Table of Contents (TOC) entries were corrected after an audit comparing the most recent document to the TOC. Changes are indicated in red font on the most recent TOC.

EDITORIAL REVISIONS FROM PREVIOUS CHANGE NOTICES (As Required):

DISTRIBUTION:

Standard Official Use Only (OUO)-Security Related Information.

Please contact: _______________ Phone: ________

END