ML21236A210: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot insert)
 
(StriderTol Bot change)
Line 17: Line 17:


=Text=
=Text=
{{#Wiki_filter:NRC FORM 618                                                                                                    U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
{{#Wiki_filter:}}
: 1. a. CERTIFICATE NUMBER                          b. REVISION NUMBER      c. DOCKET NUMBER      d. PACKAGE IDENTIFICATION NUMBER      PAGE      PAGES 9342                                  16                  71-9342              USA/9342/AF-96                      1  OF  7
: 2.      PREAMBLE
: a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, Packaging and Transportation of Radioactive Material.
: b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
: 3.      THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION
: a. ISSUED TO (Name and Address)                                    b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION DAHER-TLI                                                              Daher-TLI consolidated application dated 8161 Maple Lawn Boulevard                                              February 17, 2021.
Suite 480 Fulton, MD 20759
: 4.      CONDITIONS This certificate is conditional upon fulfilling the requirements of 10 CFR Part 71, as applicable, and the conditions specified below.
5.(a)      Packaging (1)        Model No.: Versa-Pac in two configurations: VP-55 and VP-110.
(2)        Description The Model No. Versa-Pac is either a 55-gallon (Model No. VP-55) or a 110-gallon (Model No.
VP-110) package for shipment of uranium oxides, uranium metal, uranyl nitrate crystals and other uranium compounds, e.g., uranium carbides, uranyl fluorides and uranyl carbonates, uranium hexafluoride in the 1S or 2S cylinders, and TRISO fuel. The 1S and 2S cylinders are ANSI N14.1 Standard compliant, which means that each cylinder (which includes new or re-certified cylinders) must be fabricated, inspected, tested, and maintained in accordance with ANSI N14.1-2012 or earlier version of ANSI N14.1 at the time of fabrication.
The exterior skin of the packaging is a UN1A2/Y425/S minimum, carbon steel material for the Model No. VP-55 and a UN1A2/Y409/S minimum, carbon steel for the Model No. VP-110.
All models use a bolted closure ring, ASTM A429 bolts and nuts, a silicone gasket, a drum cover reinforced by a 10-gauge thick plate with four or eight bolts depending upon the Model No. VP-55 or VP-110, respectively.
All models are strengthened with vertical stiffeners, two inner liners insulated by a ceramic fiber blanket and a 1/4 carbon steel reinforcing plate on the bottom. The packagings interior is completely insulated with layers of a ceramic fiber blanket around the containment cavity with rigid polyurethane foam disks on the top and bottom of the cavity.
 
NRC FORM 618                                                                                        U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                b. REVISION NUMBER    c. DOCKET NUMBER      d. PACKAGE IDENTIFICATION NUMBER    PAGE          PAGES 9342                        16                  71-9342              USA/9342/AF-96                    2      OF  7 5.(a)(2)              Description (continued)
A 1/2 thick fiberglass ring is used as a thermal break at the payload cavity flange. The cavity blind flange is secured to the flange with twelve bolts.
The primary containment boundary for the Model Nos. VP-55 and VP-110 is defined as the payload cavity with its associated welds, the containment end plate, the inner flange ring, the silicone-coated fiberglass gasket, the cavity blind flange, and the bolts.
When utilizing the 5-inch steel pipe inner container in the Model No. VP-55, (5-inch pipe with the threaded cap), the containment boundary is defined as the payload cavity with its associated welds, the containment end plate, the inner flange ring, the silicone-coated fiberglass gasket, the payload vessel blind flange, and the bolts.
When transporting 1S and 2S cylinders in the VP-55, a 9 lbs/ft3 polyethylene foam liner is inserted into the package cavity, with a minimum thickness of 2 inches.
The approximate dimensions and weights of the packaging are as follows:
Table 1 - Weight and Dimensions Model No.        Packaging    Packaging            Payload                Payload            Packaging          Maximum OD (in.)    Height (in.)      Containment            Containment          Tare Weight          gross Cavity ID (in.)      Cavity Height (in.)          (lbs.)        weight (lbs.)
VP-55          23-3/16      34-3/4                15                    25-7/8                  390              750 VP-110          30-7/16      42-3/4                21                    29-3/4                  705              965 (3)        Drawings The packaging is constructed and assembled in accordance with DAHER-TLI Drawing Nos.:
VP-55-LD, Rev. 4 (sheets 1 and 2)                55 Gallon Versa-Pac Shipping Container VP-110-LD, Rev. 3 (sheets 1 and 2)              110 Gallon Versa-Pac Shipping Container The 5-inch steel pipe inner container is constructed and assembled in accordance with Daher-TLI Drawing No. VP-55-2R Rev. 0, sheet 1 of 1.
 
NRC FORM 618                                                                                U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER              b. REVISION NUMBER c. DOCKET NUMBER  d. PACKAGE IDENTIFICATION NUMBER PAGE    PAGES 9342                      16              71-9342          USA/9342/AF-96                  3 OF  7 5.(b)                Contents (1)        Type and form of material (i)    Solid, homogeneous (powder or crystalline), or non-homogeneous, uranium materials with no free-standing liquids. Materials shall be stable and in a non-pyrophoric form.
Density is not limited. Materials may include natural thorium in any form. Materials may include neutron poisons (e.g., boron, hafnium, erbium, and gadolinia).
Contents are limited to:
A.      Uranium oxides (UxOy).
B.      Uranyl nitrate crystals in the form of uranyl nitrate hexahydrate, trihydrate or dihydrate.
C.      Other uranium compounds, e.g., uranyl fluorides and uranyl carbonates.
Uranium compounds may also contain carbon or be mixed with carbon or graphite. Uranium carbide is authorized for shipment. However, uranium hydrites are not authorized for shipment.
D.      Uranium metal or uranium alloys.
E.      Natural thorium in any form.
(ii)  TRISO fuel and compacts composed of uranium kernels encased within layers of carbon and SiC to form TRISO particles. The uranium may be in the form of uranium oxides, carbides, and/or nitrides. Uranium kernels and TRISO particles are of unrestricted size, density, and uranium content per kernel/particle. Uranium kernels and TRISO particles may be loose or mixed in a graphite matrix and pressed into compacts of various fuel forms (e.g., annular cylinders, planks, right circular cylinders, spheres, etc.). Pressed TRISO fuel compacts may include a graphite fuel free zone at the periphery of the component.
(iii)  Uranium Hexafluoride is authorized for shipment when loaded into 1S or 2S cylinders, or in sample tubes when less than 0.1 kg in total quantity, utilizing a 9 PCF polyethylene foam liner with a thickness of at least 2 inches. Aside from the polyethylene foam liner, no hydrogenous packing materials are permitted when shipping 1S/2S cylinders.
 
NRC FORM 618                                                                                    U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                b. REVISION NUMBER  c. DOCKET NUMBER  d. PACKAGE IDENTIFICATION NUMBER PAGE    PAGES 9342                        16              71-9342          USA/9342/AF-96                  4 OF  7 5.(b)(1)              Type and form of material (continued)
Contents may be pre-packaged in polyethylene, polytetrafluoroethylene, aluminum, and carbon steel, Aluminum Trihydrate, Sodium Borate (Borax, fused), perlite, paper labels, plastic tape, plastic bags, plastic bottles and desiccant such as Quik-Solid are also authorized as packing materials. The quantity of hydrogenous packing materials is unlimited unless otherwise specified. Materials with a hydrogen density greater than 0.141 g/cm3 are not authorized.
Radioactive contents shall have an auto-ignition temperature and melting point greater than 600ºF.
(2)        Maximum quantity of material per package:
The U-235 and uranium mass limits are determined by enrichment and are not to exceed the limits established below:
Table 2 - Loading Table for Model Nos. VP-55 and VP-110 U-235 Mass Limit (g)
Weight Percent U-235 Ground/Vessel                              Air 100%                                  360                                360 20%                                  445                                445 10%                                  505                                505 5%                                  610                                610 1.25%                                1,650                                  --
For contents restricted by Table 2A, hydrogenous packing materials are not to exceed 1 lb (454 g) of material. Uranium compounds containing hydrogen (e.g., hydrates and hydrides) are not permissible under Table 2A. The bumper pads and insulation plug are not considered in the 1 lb. hydrogenous material limit.
Table 2A - Loading Table for Model No. VP-55 With Limited Hydrogenous Packing Material U-235 Mass Limit (g)
Weight Percent U-235
                                                      -            CSI=0.7                        CSI=1.0 100%                                    515                              --
20%                                    605                            635 10%                                    685                              --
5%                                    800                              --
For contents restricted by Table 3, all fissile contents shall be loaded into a single 5-inch pipe.
 
NRC FORM 618                                                                                      U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                  b. REVISION NUMBER  c. DOCKET NUMBER  d. PACKAGE IDENTIFICATION NUMBER PAGE    PAGES 9342                          16                71-9342          USA/9342/AF-96                  5 OF  7 5(b)(2)              Maximum quantity of material per package (continued)
Table 3 - Loading Table for Model No. VP-55 with 5-inch pipe U-235 Mass Limit (g)
Weight Percent U-235 Ground/Vessel                              Air 100%                                    695                                395 20%                                  1,215                              495 10%                              Unlimited 1                              590 5%                              Unlimited 1                              790 1          Contents 10 wt% are limited by the volume of the 5-inch pipe container (6.4 L). This corresponds to theoretical mass limits of 122 kg of U-metal, 60 kg UO, and 45 kg UO.
Actual content mass will be lower due to material packing efficiency, secondary containers, shoring and package gross weight limit.
For contents restricted by Table 3A, all fissile contents shall be loaded into 5-inch pipe(s) and hydrogenous packing materials are not to exceed 1.25 lb (567 g) of material per pipe.
Uranium compounds containing hydrogen (e.g., hydrates and hydrides) are not permissible under Table 3A.
Table 3A - Loading Table for Model No. VP-55 with 5-inch pipe and Limited Hydrogenous Packing Material 1 Weight Percent U-235                      Number of Pipes                              CSI 20%                                  1                  CSI=1.0 for all compounds 10%                                  2                  CSI=1.0 for uranium oxides CSI=1.4 for all other compounds 1            Contents are limited by the volume of the 5-inch pipe container (6.4 L). This corresponds to theoretical mass limits of 122 kg of U-metal, 60 kg UO, and 45 kg UO, per pipe.
Actual content mass will be lower due to material packing efficiency, secondary containers, shoring and package gross weight limit.
For contents restricted by Tables 4 and 5, all fissile material shall be uranium hexafluoride loaded into 1S or 2S cylinders. If both 1S and 2S cylinders are transported in the same package and/or the number of cylinders exceeds the allowed quantity in Table 4, follow the mass limits of Table 2. If a package containing 1S/2S cylinders is transported by air, follow the mass limits of Table 2. For 1S or 2S cylinders with material exceeding 20 wt% U-235, each 1S or 2S cylinder shall be loaded into an individual 5-inch pipe.
 
NRC FORM 618                                                                                    U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                b. REVISION NUMBER    c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER  PAGE    PAGES 9342                        16                  71-9342        USA/9342/AF-96                    6 OF  7 5(b)(2)              Maximum quantity of material per package (continued)
Table 4: 1S/2S Cylinder Limits for the VP-55 (up to 20wt.% U-235)
Cylinder Type        Mass UF6 per          Weight percent U-        Number of              U-235 Mass VP-55 (lb/g)                  235              Cylinders                Limit per VP-55 (g) 1S            7.0 / 3,175                    20                  7                      429.8 2S            9.8 / 4,445                    20                  2                      600.8 Table 5: 1S/2S Cylinder Limits for the VP-55 with 5-inch Pipe (up to 100wt.% U-235)
Cylinder Type      Mass UF6 per            Weight percent        Number of              U-235 Mass VP-55 (lb/g)                U-235            Cylinders                Limit per (e is enrichment)                              VP-55 (g) 1S              1.0 / 454              20 < e  100              1                      306 2S            4.9 / 2,223            20 < e  100              1                    1497 The net weight of the authorized contents shall not exceed 350 lbs for the Model Nos. VP-55 and 260 lbs for the Model No. VP-110, including cribbing and dunnage.
(3)        Contents are limited to normal form material. The radionuclide inventory of the loaded contents, including U-234 and U-236, shall be less than the calculated mixture A2 value.
(4)        Decay heat is limited to 11.4 W.
5.(c)      Criticality Safety Index (CSI)
(1)        Contents Limited by Table 2 (VP-55 or VP-110):                        1.0 (2)        Contents Limited by Table 2A (VP-55):                                As listed in Table 2A (3)        Contents Limited by Table 3 (VP-55):                                  0.7 for material up to 10 wt%
and 1.0 for material greater than 10 wt% and up to 100 wt%.
(4)        Contents Limited by Table 3A (VP-55):                                As listed in Table 3A (5)        Contents Limited by Table 4 (only VP-55):                            1.0 (6)        Contents Limited by Table 5 (only VP-55 with 5-inch pipe):            1.0
 
NRC FORM 618                                                                                  U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER              b. REVISION NUMBER    c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE      PAGES 9342                        16                71-9342        USA/9342/AF-96                  7  OF  7
: 6.        In addition to the requirements of Subpart G of 10 CFR Part 71:
(a)        The package shall be prepared for shipment and operated in accordance with the Operating Procedures in Section No. 7 of the application.
(b)        Each packaging must meet the Acceptance Tests and Maintenance Program of Section No. 8 of the application.
: 7.        Transport by air of fissile material is authorized, as limited by the Air quantities in Table 2 and Table 3.
: 8.        Transport of plutonium above minimum detectable quantities is not authorized.
: 9.        Packages must be marked with the appropriate model number, i.e., VP-55 or VP-110, as applicable.
Optional use of certain package components is listed in the licensing drawing notes.
: 10.        Content forms may not be mixed in a single package.
: 11.        The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
: 12.        Expiration date: May 31, 2024.
REFERENCES Daher-TLI application, "Application for Certificate of Compliance for the Versa-Pac Shipping Package,"
Revision No.12, February 17, 2021.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Digitally signed by John B.
John B. McKirgan              McKirgan Date: 2021.09.03 12:55:06 -04'00' John McKirgan, Chief Storage and Transportation Licensing Branch Division of Fuel Management Office of Nuclear Material Safety and Safeguards Date: 9/3/21}}

Revision as of 23:36, 16 January 2022

Enclosure 1: CoC No. 9342, Revision No. 16 (Letter to P. Sewell Revision No. 16 of Certificate of Compliance No. 9342 for the Model No. Versa-Pac Transportation Package)
ML21236A210
Person / Time
Site: 07109342
Issue date: 09/03/2021
From: John Mckirgan
Storage and Transportation Licensing Branch
To:
Daher-TLI
Devaser N 301-415-5196 NMSS/DFM/STLB
Shared Package
ML21236A208 List:
References
USA/9342/AF-96
Download: ML21236A210 (7)
v • d • e


Text

Retrieved from "https://kanterella.com/w/index.php?title=ML21236A210&oldid=3392167"