ENS 55125: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot insert)
 
(StriderTol Bot change)
 
Line 20: Line 20:
On March 4, 2021 at 1435 [CST], a tracked earthmover ran over a Humboldt 5001EZ soil density gauge at the main dam of the Sweetwater Mine Tailings Storage Facility.  After the accident occurred, the licensee secured the area and had the equipment operator stop and stay outside a fifteen foot diameter area until it was confirmed no contamination was present. The contractor contacted the Facility safety officer and the technician immediately contacted the manufacturer and took steps to assure there was no risk of contamination.  The top of the source rod, handle, and index rod were broken off but it was confirmed the remainder of the source rod was intact.  The source rod was raised to the safe position with the bottom port shutter shield closed and in-place.  Since the source rod locking mechanism was broken, measures were taken to secure the Cesium containing source rod in the safe position.  The Americium source cylinder was examined and confirmed to be without damage. The device was placed in its locked travel case. The manufacturer confirmed with these conditions there should be no risk of contamination.
On March 4, 2021 at 1435 [CST], a tracked earthmover ran over a Humboldt 5001EZ soil density gauge at the main dam of the Sweetwater Mine Tailings Storage Facility.  After the accident occurred, the licensee secured the area and had the equipment operator stop and stay outside a fifteen foot diameter area until it was confirmed no contamination was present. The contractor contacted the Facility safety officer and the technician immediately contacted the manufacturer and took steps to assure there was no risk of contamination.  The top of the source rod, handle, and index rod were broken off but it was confirmed the remainder of the source rod was intact.  The source rod was raised to the safe position with the bottom port shutter shield closed and in-place.  Since the source rod locking mechanism was broken, measures were taken to secure the Cesium containing source rod in the safe position.  The Americium source cylinder was examined and confirmed to be without damage. The device was placed in its locked travel case. The manufacturer confirmed with these conditions there should be no risk of contamination.
The licensee notified via telephone the NRC Operations Center at 1516 [CST] to provide a verbal report.  The licensee also followed up with the NRC Region 3 point of contact.  A survey and leak test was performed which confirmed the sources to be shielded and with no loose contamination. The readings obtained were noted to be in compliance with the manufacturer's specifications.  The gauge is out of service in locked storage pending shipment to the manufacturer.
The licensee notified via telephone the NRC Operations Center at 1516 [CST] to provide a verbal report.  The licensee also followed up with the NRC Region 3 point of contact.  A survey and leak test was performed which confirmed the sources to be shielded and with no loose contamination. The readings obtained were noted to be in compliance with the manufacturer's specifications.  The gauge is out of service in locked storage pending shipment to the manufacturer.
| URL = https://www.nrc.gov/reading-rm/doc-collections/event-status/event/2021/20210312en.html#en55125
| URL = https://www.nrc.gov/reading-rm/doc-collections/event-status/event/2021/20210315en.html#en55125
}}
}}


{{ENS-Nav}}
{{ENS-Nav}}

Latest revision as of 06:30, 15 March 2021

ENS 55125 +/-
Where
Brucker Engineering
Ellington, Missouri (NRC Region 3)
License number: 24-32076-01
Organization: Brucker Engineering
Reporting
10 CFR 30.50(b)(2), Licensed Material Protection Equipment Failure
Time - Person (Reporting Time:+18.18 h0.758 days <br />0.108 weeks <br />0.0249 months <br />)
Opened: Leo Turek
14:46 Mar 5, 2021
NRC Officer: Brian P. Smith
Last Updated: Mar 5, 2021
55125 - NRC Website