ML12030A191: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 16: | Line 16: | ||
=Text= | =Text= | ||
{{#Wiki_filter:}} | {{#Wiki_filter:Rensselaer Polytechnic Institute 110 8th Street l Troy, NY 12180-3590 USA Phone (518) 276-2212 l Fax (518) 276-4832 Director Office of Nuclear Material Safety and Safeguards U.S. Nuclear Regulatory Commission Washington, DC 20555-0001 | ||
==SUBJECT:== | |||
Submittal of Quality Assurance Program - Docket 71-XXXX | |||
Facility Docket Numbers 50-225 and 70-7025 Facility License Number CX-22 and TAC No. L33128 | |||
==Dear Director:== | |||
Rensselaer Polytechnic Institute hereby submits the Quality Assurance Program for Shipment or Receipt of Nuclear Fuel, August 2011. | |||
Please contact me if you have any questions or require any additional information. I may be reached via email at caracp3@rpi.edu or by phone at (518)276-2212. | |||
Sincerely, Peter F. Caracappa, Ph.D., CHP | |||
Page 1 of 8 | |||
Rensselaer Polytechnic Institute | |||
QUALITY ASSURANCE PROGRAM FOR SHIPMENT AND RECEIPT OF NUCLEAR FUEL | |||
Docket 71-XXXX Facility Dockets 50-225 & 70-7025 Facility License CX-22 & TAC No. L33128 August 2011 | |||
Page 2 of 8 | |||
QUALITY ASSURANCE PROGRAM This QA program applies to the procurement, use, maintenance, and repair of packaging used to transport nuclear fuel. | |||
TABLE OF CONTENTS | |||
CHAPTER PAGE 1. Scope 3 2. Responsibilities 3 3. Organization (10CFR71.103) 3 4. Design Control (10CFR71.107) 4 5. Procurement, Document Control (10CFR71.109) 5 | |||
: 6. Instructions, Procedures, and Drawings (10CFR71.111) 5 7. Document Control (10CFR71.113) 5 8. Control of Purchased Material, Equipment, and Services (10CFR71.115) 5 9. Identification and Control of Materials Parts and Components (10CFR71.117) 6 10. Control of Special Processes (10CFR71.119) 6 11. Inspection Control (10CFR71.121) 6 12. Test Control (10CFR71.123) 7 13. Control of Measuring and Test Equipment (10CFR71.125) 7 14. Handling, Storage, and Shipping (10CFR71.127) 7 15. Inspection, Test and Operating Status (10CFR71.129) 7 16. Control of Nonconforming Materials, Parts, or Components (10CFR71.131) 7 17. Corrective Action (10CFR71.133) 7 18. Quality Assurance Records (10CFR71.135) 8 19. Audits (10CFR71.137) 8 | |||
Page 3 of 8 Quality Assurance Program | |||
A) Introduction | |||
This Quality Assurance Program applies to the procurement, use, maintenance, and repair of packaging used to transport fuel. It is designed to assure the safety of the general public during packaging and transportation of fuel or receipt of nuclear fuel. | |||
B) Quality Assurance Program | |||
: 1) Scope | |||
The description of the QA program, contained within, includes a discussion of which requirements of 10 CFR, Part 71, Subpart H are applicable and how they shall be satisfied. This Rensselaer Polytechnic Institute QA program is designed specifically for the shipment and transfer of nuclear fuel between facilities under its control. Shipment and transfer of nuclear fuel is strictly limited to the conditions for the general license for transport of fissile material specified in 10 CFR 71.22. RPI does not store or maintain non type A shipping materials and packages. | |||
The RPI Radiation Safety Officer retains the responsibility for the overall effectiveness of this QA program. | |||
Indoctrination and training shall be included in conjunction with radiation safety training requirements for personnel performing quality related activities to ensure they are properly trained and qualified to perform these activities. Changes to these quality assurance procedures shall necessitate the retraining and requalification of all individuals involved. | |||
: 2) Responsibilities | |||
The Radiation Safety Officer (RSO) is responsible for this quality assurance program. The RPI Radiation and Nuclear Safety Committee (RNSC) is responsible for reviewing the facility's quality assurance policies, goals, and objectives. All RPI personnel involved with the receipt of nuclear fuel or shipment of nuclear fuel shall follow this QA program. | |||
: 3) Organization (10 CFR 71.103) | |||
The facility organization chart is included in Fig. 1. Any or all of the personnel on the staff may perform functions under this QA program as designated by the RPI Radiation Safety Officer or other higher-level management. The Radiation Safety Officer shall ensure that measures are established to provide adequate control over any designated quality-related activities. Individuals performing QA functions have the responsibility and authority to stop unsatisfactory work or use of nonconforming materials and have | |||
Rensselaer Polytechnic Institute 110 8th Street l Troy, NY 12180-3590 USA Phone (518) 276-2212 l Fax (518) 276-4832 Director Office of Nuclear Material Safety and Safeguards U.S. Nuclear Regulatory Commission Washington, DC 20555-0001 | |||
==SUBJECT:== | |||
Submittal of Quality Assurance Program - Docket 71-XXXX | |||
Facility Docket Numbers 50-225 and 70-7025 Facility License Number CX-22 and TAC No. L33128 | |||
==Dear Director:== | |||
Rensselaer Polytechnic Institute hereby submits the Quality Assurance Program for Shipment or Receipt of Nuclear Fuel, August 2011. | |||
Please contact me if you have any questions or require any additional information. I may be reached via email at caracp3@rpi.edu or by phone at (518)276-2212. | |||
Sincerely, Peter F. Caracappa, Ph.D., CHP | |||
Page 1 of 8 | |||
Rensselaer Polytechnic Institute | |||
QUALITY ASSURANCE PROGRAM FOR SHIPMENT AND RECEIPT OF NUCLEAR FUEL | |||
Docket 71-XXXX Facility Dockets 50-225 & 70-7025 Facility License CX-22 & TAC No. L33128 August 2011 | |||
Page 2 of 8 | |||
QUALITY ASSURANCE PROGRAM This QA program applies to the procurement, use, maintenance, and repair of packaging used to transport nuclear fuel. | |||
TABLE OF CONTENTS | |||
CHAPTER PAGE 1. Scope 3 2. Responsibilities 3 3. Organization (10CFR71.103) 3 4. Design Control (10CFR71.107) 4 5. Procurement, Document Control (10CFR71.109) 5 | |||
: 6. Instructions, Procedures, and Drawings (10CFR71.111) 5 7. Document Control (10CFR71.113) 5 8. Control of Purchased Material, Equipment, and Services (10CFR71.115) 5 9. Identification and Control of Materials Parts and Components (10CFR71.117) 6 10. Control of Special Processes (10CFR71.119) 6 11. Inspection Control (10CFR71.121) 6 12. Test Control (10CFR71.123) 7 13. Control of Measuring and Test Equipment (10CFR71.125) 7 14. Handling, Storage, and Shipping (10CFR71.127) 7 15. Inspection, Test and Operating Status (10CFR71.129) 7 16. Control of Nonconforming Materials, Parts, or Components (10CFR71.131) 7 17. Corrective Action (10CFR71.133) 7 18. Quality Assurance Records (10CFR71.135) 8 19. Audits (10CFR71.137) 8 | |||
Page 3 of 8 Quality Assurance Program | |||
A) Introduction | |||
This Quality Assurance Program applies to the procurement, use, maintenance, and repair of packaging used to transport fuel. It is designed to assure the safety of the general public during packaging and transportation of fuel or receipt of nuclear fuel. | |||
B) Quality Assurance Program | |||
: 1) Scope | |||
The description of the QA program, contained within, includes a discussion of which requirements of 10 CFR, Part 71, Subpart H are applicable and how they shall be satisfied. This Rensselaer Polytechnic Institute QA program is designed specifically for the shipment and transfer of nuclear fuel between facilities under its control. Shipment and transfer of nuclear fuel is strictly limited to the conditions for the general license for transport of fissile material specified in 10 CFR 71.22. RPI does not store or maintain non type A shipping materials and packages. | |||
The RPI Radiation Safety Officer retains the responsibility for the overall effectiveness of this QA program. | |||
Indoctrination and training shall be included in conjunction with radiation safety training requirements for personnel performing quality related activities to ensure they are properly trained and qualified to perform these activities. Changes to these quality assurance procedures shall necessitate the retraining and requalification of all individuals involved. | |||
: 2) Responsibilities | |||
The Radiation Safety Officer (RSO) is responsible for this quality assurance program. The RPI Radiation and Nuclear Safety Committee (RNSC) is responsible for reviewing the facility's quality assurance policies, goals, and objectives. All RPI personnel involved with the receipt of nuclear fuel or shipment of nuclear fuel shall follow this QA program. | |||
: 3) Organization (10 CFR 71.103) | |||
The facility organization chart is included in Fig. 1. Any or all of the personnel on the staff may perform functions under this QA program as designated by the RPI Radiation Safety Officer or other higher-level management. The Radiation Safety Officer shall ensure that measures are established to provide adequate control over any designated quality-related activities. Individuals performing QA functions have the responsibility and authority to stop unsatisfactory work or use of nonconforming materials and have}} | |||
Revision as of 09:09, 2 August 2018
| ML12030A191 | |
| Person / Time | |
|---|---|
| Site: | Rensselaer Polytechnic Institute, 07007025 |
| Issue date: | 01/30/2012 |
| From: | Caracappa P F Rensselaer Polytechnic Institute |
| To: | Office of Nuclear Material Safety and Safeguards |
| References | |
| TAC L33128 | |
| Download: ML12030A191 (9) | |
Text
Rensselaer Polytechnic Institute 110 8th Street l Troy, NY 12180-3590 USA Phone (518) 276-2212 l Fax (518) 276-4832 Director Office of Nuclear Material Safety and Safeguards U.S. Nuclear Regulatory Commission Washington, DC 20555-0001
SUBJECT:
Submittal of Quality Assurance Program - Docket 71-XXXX
Facility Docket Numbers 50-225 and 70-7025 Facility License Number CX-22 and TAC No. L33128
Dear Director:
Rensselaer Polytechnic Institute hereby submits the Quality Assurance Program for Shipment or Receipt of Nuclear Fuel, August 2011.
Please contact me if you have any questions or require any additional information. I may be reached via email at caracp3@rpi.edu or by phone at (518)276-2212.
Sincerely, Peter F. Caracappa, Ph.D., CHP
Page 1 of 8
Rensselaer Polytechnic Institute
QUALITY ASSURANCE PROGRAM FOR SHIPMENT AND RECEIPT OF NUCLEAR FUEL
Docket 71-XXXX Facility Dockets 50-225 & 70-7025 Facility License CX-22 & TAC No. L33128 August 2011
Page 2 of 8
QUALITY ASSURANCE PROGRAM This QA program applies to the procurement, use, maintenance, and repair of packaging used to transport nuclear fuel.
TABLE OF CONTENTS
CHAPTER PAGE 1. Scope 3 2. Responsibilities 3 3. Organization (10CFR71.103) 3 4. Design Control (10CFR71.107) 4 5. Procurement, Document Control (10CFR71.109) 5
- 6. Instructions, Procedures, and Drawings (10CFR71.111) 5 7. Document Control (10CFR71.113) 5 8. Control of Purchased Material, Equipment, and Services (10CFR71.115) 5 9. Identification and Control of Materials Parts and Components (10CFR71.117) 6 10. Control of Special Processes (10CFR71.119) 6 11. Inspection Control (10CFR71.121) 6 12. Test Control (10CFR71.123) 7 13. Control of Measuring and Test Equipment (10CFR71.125) 7 14. Handling, Storage, and Shipping (10CFR71.127) 7 15. Inspection, Test and Operating Status (10CFR71.129) 7 16. Control of Nonconforming Materials, Parts, or Components (10CFR71.131) 7 17. Corrective Action (10CFR71.133) 7 18. Quality Assurance Records (10CFR71.135) 8 19. Audits (10CFR71.137) 8
Page 3 of 8 Quality Assurance Program
A) Introduction
This Quality Assurance Program applies to the procurement, use, maintenance, and repair of packaging used to transport fuel. It is designed to assure the safety of the general public during packaging and transportation of fuel or receipt of nuclear fuel.
B) Quality Assurance Program
- 1) Scope
The description of the QA program, contained within, includes a discussion of which requirements of 10 CFR, Part 71, Subpart H are applicable and how they shall be satisfied. This Rensselaer Polytechnic Institute QA program is designed specifically for the shipment and transfer of nuclear fuel between facilities under its control. Shipment and transfer of nuclear fuel is strictly limited to the conditions for the general license for transport of fissile material specified in 10 CFR 71.22. RPI does not store or maintain non type A shipping materials and packages.
The RPI Radiation Safety Officer retains the responsibility for the overall effectiveness of this QA program.
Indoctrination and training shall be included in conjunction with radiation safety training requirements for personnel performing quality related activities to ensure they are properly trained and qualified to perform these activities. Changes to these quality assurance procedures shall necessitate the retraining and requalification of all individuals involved.
- 2) Responsibilities
The Radiation Safety Officer (RSO) is responsible for this quality assurance program. The RPI Radiation and Nuclear Safety Committee (RNSC) is responsible for reviewing the facility's quality assurance policies, goals, and objectives. All RPI personnel involved with the receipt of nuclear fuel or shipment of nuclear fuel shall follow this QA program.
- 3) Organization (10 CFR 71.103)
The facility organization chart is included in Fig. 1. Any or all of the personnel on the staff may perform functions under this QA program as designated by the RPI Radiation Safety Officer or other higher-level management. The Radiation Safety Officer shall ensure that measures are established to provide adequate control over any designated quality-related activities. Individuals performing QA functions have the responsibility and authority to stop unsatisfactory work or use of nonconforming materials and have
Rensselaer Polytechnic Institute 110 8th Street l Troy, NY 12180-3590 USA Phone (518) 276-2212 l Fax (518) 276-4832 Director Office of Nuclear Material Safety and Safeguards U.S. Nuclear Regulatory Commission Washington, DC 20555-0001
SUBJECT:
Submittal of Quality Assurance Program - Docket 71-XXXX
Facility Docket Numbers 50-225 and 70-7025 Facility License Number CX-22 and TAC No. L33128
Dear Director:
Rensselaer Polytechnic Institute hereby submits the Quality Assurance Program for Shipment or Receipt of Nuclear Fuel, August 2011.
Please contact me if you have any questions or require any additional information. I may be reached via email at caracp3@rpi.edu or by phone at (518)276-2212.
Sincerely, Peter F. Caracappa, Ph.D., CHP
Page 1 of 8
Rensselaer Polytechnic Institute
QUALITY ASSURANCE PROGRAM FOR SHIPMENT AND RECEIPT OF NUCLEAR FUEL
Docket 71-XXXX Facility Dockets 50-225 & 70-7025 Facility License CX-22 & TAC No. L33128 August 2011
Page 2 of 8
QUALITY ASSURANCE PROGRAM This QA program applies to the procurement, use, maintenance, and repair of packaging used to transport nuclear fuel.
TABLE OF CONTENTS
CHAPTER PAGE 1. Scope 3 2. Responsibilities 3 3. Organization (10CFR71.103) 3 4. Design Control (10CFR71.107) 4 5. Procurement, Document Control (10CFR71.109) 5
- 6. Instructions, Procedures, and Drawings (10CFR71.111) 5 7. Document Control (10CFR71.113) 5 8. Control of Purchased Material, Equipment, and Services (10CFR71.115) 5 9. Identification and Control of Materials Parts and Components (10CFR71.117) 6 10. Control of Special Processes (10CFR71.119) 6 11. Inspection Control (10CFR71.121) 6 12. Test Control (10CFR71.123) 7 13. Control of Measuring and Test Equipment (10CFR71.125) 7 14. Handling, Storage, and Shipping (10CFR71.127) 7 15. Inspection, Test and Operating Status (10CFR71.129) 7 16. Control of Nonconforming Materials, Parts, or Components (10CFR71.131) 7 17. Corrective Action (10CFR71.133) 7 18. Quality Assurance Records (10CFR71.135) 8 19. Audits (10CFR71.137) 8
Page 3 of 8 Quality Assurance Program
A) Introduction
This Quality Assurance Program applies to the procurement, use, maintenance, and repair of packaging used to transport fuel. It is designed to assure the safety of the general public during packaging and transportation of fuel or receipt of nuclear fuel.
B) Quality Assurance Program
- 1) Scope
The description of the QA program, contained within, includes a discussion of which requirements of 10 CFR, Part 71, Subpart H are applicable and how they shall be satisfied. This Rensselaer Polytechnic Institute QA program is designed specifically for the shipment and transfer of nuclear fuel between facilities under its control. Shipment and transfer of nuclear fuel is strictly limited to the conditions for the general license for transport of fissile material specified in 10 CFR 71.22. RPI does not store or maintain non type A shipping materials and packages.
The RPI Radiation Safety Officer retains the responsibility for the overall effectiveness of this QA program.
Indoctrination and training shall be included in conjunction with radiation safety training requirements for personnel performing quality related activities to ensure they are properly trained and qualified to perform these activities. Changes to these quality assurance procedures shall necessitate the retraining and requalification of all individuals involved.
- 2) Responsibilities
The Radiation Safety Officer (RSO) is responsible for this quality assurance program. The RPI Radiation and Nuclear Safety Committee (RNSC) is responsible for reviewing the facility's quality assurance policies, goals, and objectives. All RPI personnel involved with the receipt of nuclear fuel or shipment of nuclear fuel shall follow this QA program.
- 3) Organization (10 CFR 71.103)
The facility organization chart is included in Fig. 1. Any or all of the personnel on the staff may perform functions under this QA program as designated by the RPI Radiation Safety Officer or other higher-level management. The Radiation Safety Officer shall ensure that measures are established to provide adequate control over any designated quality-related activities. Individuals performing QA functions have the responsibility and authority to stop unsatisfactory work or use of nonconforming materials and have