ML18318A407: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
 
(Created page by program invented by StriderTol)
 
Line 16: Line 16:


=Text=
=Text=
{{#Wiki_filter:($50,000 or more with life of one year or longer)  
{{#Wiki_filter:Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
General: During performance and through final payment of this contract, the contractor is responsible for the accuracy and completeness of data within the System for Award Management (SAM) database and for any liability resulting from the Governments reliance on inaccurate or incomplete SAM data.
The contractor shall prepare invoices/vouchers for reimbursement of costs in the manner and format described herein. FAILURE TO SUBMIT INVOICES/VOUCHERS IN ACCORDANCE WITH THESE INSTRUCTIONS MAY RESULT IN REJECTION OF THE INVOICE/VOUCHER AS IMPROPER.
Standard Forms: Reimbursement requests shall be submitted on the payee's letterhead, invoice/voucher, or on the Government's Standard Form 1034, "Public Voucher for Purchases and Services Other than Personal," and Standard Form 1035, "Public Voucher for Purchases Other than Personal--Continuation Sheet."
Electronic Invoice/Voucher Submissions: The preferred method of submitting invoices/vouchers is electronically to the Department of Treasurys Administrative Resource Center, via email to: NRC@fiscal.treasury.gov.
Hard-Copy Invoice/Voucher Submissions: If you submit a hard-copy of the invoice/voucher, a signed original and supporting documentation shall be submitted to the following address:
Fiscal Accounting Program, Admin & Training Group Avery Street A3-G Bureau of the Fiscal Service PO Box 1328 Parkersburg WV 26106-1328 Purchase of Capital Property: ($50,000 or more with life of one year or longer)
Contractors must report to the Contracting Officer, electronically, any capital property acquired with contract funds having an initial cost of $50,000 or more, in accordance with procedures set forth in NRC Management Directive (MD).
Agency Payment Office: Payment will continue to be made by the office designated in the contract in Block 12 of the Standard Form 26, or Block 25 of the Standard Form 33, whichever is applicable.
Frequency: The contractor shall submit requests for reimbursement once each month, unless otherwise authorized by the Contracting Officer.
Format: Invoices/Vouchers shall be submitted in the format depicted on the attached sample form entitled "Invoice/Voucher for Purchases and Services Other Than Personal". Alternate formats are permissible only if they address all requirements of the Billing Instructions. The 1


(Must include separate detailed costs for airfare, per diem, and other transportation expenses. All costs must be adequately supported by copies of receipts or other documentation.)  
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018) instructions for preparation and itemization of the invoice/voucher are included with the sample form.
Task Order Contracts: The contractor must submit a separate invoice/voucher for each individual task order with detailed cost information. This includes all applicable cost elements and other items discussed in paragraphs (a) through (s) of the attached instructions. In addition, the invoice/voucher must specify the contract number, and the NRC-assigned task/delivery order number.
Billing of Costs after Expiration of Contract: If costs are incurred during the contract period and invoiced after the contract has expired, you must cite the period during which these costs were incurred. To be considered a proper expiration invoice/voucher, the contractor shall clearly mark it "EXPIRATION INVOICE" or EXPIRATION VOUCHER".
Final invoices/vouchers shall be marked "FINAL INVOICE" or "FINAL VOUCHER".
Currency: Invoices/Vouchers must be expressed in U.S. Dollars.
Supersession: These instructions supersede previous Billing Instructions for Cost-Reimbursement Type Contracts (FEB 2018).
2


(provide the rate information applicable to your firm)
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
INVOICE/VOUCHER FOR PURCHASES AND SERVICES OTHER THAN PERSONAL (SAMPLE FORMAT - COVER SHEET)
: 1. Official Agency Billing Office Fiscal Accounting Program, Admin & Training Group Avery Street A3-G Bureau of the Fiscal Service PO Box 1328 Parkersburg WV 26106-1328
: 2. Invoice/Voucher Information
: a. Payee's DUNS Number or DUNS+4. The Payee shall include the Payees Data Universal Number (DUNS) or DUNS+4 number that identifies the Payees name and address. The DUNS+4 number is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the Payee to identify alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.
: b. Taxpayer Identification Number. The Payee shall include the Payees taxpayer identification number (TIN) used by the Internal Revenue Service (IRS) in the administration of tax laws.
(See IRS Web site:
http://www.irs.gov/Individuals/International-Taxpayers/Taxpayer-Identification-Numbers-(TIN)).
: c. Payees Name and Address. Show the name of the Payee as it appears in the contract and its correct address. Where the Payee is authorized to assign the proceeds of this contract in accordance with the clause at Federal Acquisition Regulation (FAR) 52.232-23 Assignment of Claims, the Payee shall require as a condition of any such assignment, that the assignee shall register separately in the System for Award Management (SAM) database at http://sam.gov and shall be paid by EFT in accordance with the terms of this contract. See FAR 52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
: d. Contract Number. Insert the NRC contract number (including Enterprise-wide Contract (EWC)), GSA Federal Supply Schedule (FSS), Governmentwide Agency Contract (GWAC) number, or Multiple Agency Contract (MAC) number, as applicable.
: e. Task Order Number. Insert the task/delivery order number (If Applicable). Do not include more than one task order per invoice or the invoice may be rejected as improper.
: f. Invoice/Voucher. The appropriate sequential number of the invoice/voucher, beginning with 001 should be designated. Contractors may also include an individual internal accounting number, if desired, in addition to the 3-digit sequential number.
: g. Date of Invoice/Voucher. Insert the date the invoice/voucher is prepared.
3


(not to exceed 85% of fee earned based upon negotiated contract fee percentage) Note:  The fee balance withheld by NRC may not exceed $100,000.  
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
: h. Billing Period. Insert the beginning and ending dates (day, month, year) of the period during which costs were incurred and for which reimbursement is requested.
: i. Description of Deliverables. Provide a brief description of supplies or services, quantity, unit cost, and total cost.
: j. Work Completed. Provide a general summary description of the services performed or products submitted for the invoice period and specify the section or Contract Line Item Number (CLIN) or SubCLIN in the contract pertaining to the required deliverable(s).
: k. Shipping. Insert weight and zone of shipment, if shipped by parcel post.
: l. Charges for freight or express shipments. Attach prepaid bill if shipped by freight or express.
: m. Instructions. Include instructions to consignee to notify the Contracting Officer of receipt of shipment.
: n. For Indefinite Delivery contracts, the final invoice/voucher shall be marked "FINAL INVOICE or "FINAL VOUCHER".
: o. Final invoices must include the name of the NRC Contracting Officers Representative (COR) and Contracting Officer.
: p. Direct Costs. Insert the amount billed for the following cost elements, adjustments, suspensions, and total amounts, for both the current billing period and for the cumulative period (from contract inception to end date of this billing period). The contractor shall not bill at rates that have not been incorporated into the contract by formal modification.
(1)    Direct Labor. This consists of salaries and wages paid (or accrued) for direct performance of the contract itemized as follows:
Labor            Staff          Hours                          Cumulative Category        Assigned        Billed      Rate    Total      Hours Billed (2)    Fringe Benefits. This represents fringe benefits applicable to direct labor and billed as a direct cost. Where a rate is used indicate the rate. Fringe benefits included in direct labor or in other indirect cost pools should not be identified here.
(3)    Contractor-acquired property ($50,000 or more). List each item costing $50,000 or more and having a life expectancy of more than one year. List only those items of equipment for which reimbursement is requested. For each such item, list the following (as applicable): (a) an item description, (b) manufacturer, (c) model number, (d) serial 4


Nuclear Planet Journal
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018) number, (e) acquisition cost, (f) date of purchase, and (g) a copy of the purchasing document.
(4)      Contractor-acquired property (under $50,000), Materials, and Supplies. These are equipment other than that described in (3) above, plus consumable materials and supplies. List by category. List items valued at $1,000 or more separately. Provide the item number for each piece of equipment valued at $1,000 or more.
(5)      Premium Pay. This enumeration in excess of the basic hourly rate. (Requires written approval of the Contracting Officer.)
(6)      Consultant Fee. The supporting information must include the name, hourly or daily rate of the consultant, and reference the NRC approval (if not specifically approved in the original contract).
(7)      Travel. Total costs associated with each trip must be shown in the following format:
Start Date      Destination          Costs From To          From To              $
(Must include separate detailed costs for airfare, per diem, and other transportation expenses. All costs must be adequately supported by copies of receipts or other documentation.)
(8)      Subcontracts. Include separate detailed breakdown of all costs paid to approved subcontractors during the billing period.
(9)      Other Costs. List all other direct costs by cost element and dollar amount separately.
: q. Indirect Costs (Overhead and General and Administrative Expense). Cite the formula (rate and base) in effect in accordance with the terms of the contract, during the time the costs were incurred and for which reimbursement is requested.
: r. Fixed-Fee. If the contract provides for a fixed-fee, it must be reimbursed as indicated in the contract. Cite the formula or method of computation. Include this information as it applies to individual task orders as well.
(1) The NRC will withhold payment of 15% of the negotiated contract fixed-fee amount, not to exceed $100,000.
5


(not to exceed 85% of fee earned based upon negotiated contract fee percentage)}}
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
(2) If the fee withholding amount has reached $100,000, the contractor may resume billing the NRC for the balance of its fee under subsequent invoices for work completed.
(3) Any fee amounts withheld by the NRC will be paid to the contractor during contract closeout in increments, following the submission/settlement of indirect rate proposals in accordance with FAR 52.216-8, Fixed Fee (JUN 2011).
: s. Total Amount Billed. Insert columns for total amounts for the current and cumulative periods.
: t. Adjustments. Insert columns for any adjustments, including outstanding suspensions for deficient or defective products or nonconforming services, for the current and cumulative periods.
: u. Grand Totals.
6
 
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
: 3. Sample Invoice/Voucher Information Sample Invoice/Voucher Information (Supporting Documentation must be attached)
This invoice/voucher represents reimbursable costs for the billing period from  _ through _ .
Amount Billed Current Period      Cumulative (a)    Direct Costs (1)    Direct labor                                  $_________          $_________
(2)    Fringe benefits (% of direct labor)            $_________          $_________
(3)    Government property ($50,000 or more)          $_________          $_________
(4)    Government property, Materials, and Supplies (under $50,000 per item)              $_________          $_________
(5)    Premium pay (NRC approved overtime)            $_________          $_________
(6)    Consultants Fee                                $_________          $_________
(7)    Travel                                        $_________          $_________
(8)    Subcontracts                                  $_________          $_________
(9)    Other costs                                    $_________          $_________
Total Direct Costs:          $_________          $_________
(b)    Indirect Costs (provide the rate information applicable to your firm)
(10)  Overhead        % of (Indicate Base)                          $_________          $_________
(11)  General and Administrative (G&A)          %
of            (Indicate Base)                        $_________          $_________
Total Indirect Costs:        $_________          $_________
(c)    Fixed-Fee:
(12)  Fixed-Fee Calculations:
: i.      Total negotiated contract fixed-fee percent___ and amount $_________
ii.      85% allowable fee amount $_________
iii. Cumulative fee billed on prior invoices $_________
iv.      Fee due this invoice (not to exceed 85% of fee earned based upon negotiated contract fee percentage) $_________
Note: The fee balance withheld by NRC may not exceed $100,000.
7
 
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
Total Fixed-Fee:            $_________              $_________
(d)    Total Amount Billed                                $_________              $_________
(e)    Adjustments (+/-)                                  $_________              $_________
(f)    Grand Total                                        $_________              $_________
(The invoice/voucher format provided above must include information similar to that included below in the following to ensure accuracy and completeness.)
SAMPLE SUPPORTING INFORMATION The budget information provided below is for format purposes only and is illustrative.
Cost Elements:
: 1)    Direct Labor - $2,400 Labor                  Staff        Hours                                  Cumulative Category              Assigned      Billed    Rate      Total            Hours Billed Senior Engineer I      Pete Smith    100      $14.00    $1,400                975 Engineer              Rob Johnson 50          $10.00    $ 500                  465 Computer Analyst      John Roberts 100        $ 5.00    $ 500                  320
                                                                $2,400                1,760 hrs.
: 2)    Fringe Benefits - $480 Fringe @ 20% of Direct Salaries Labor                                              Fringe Category                            Salaries      Amount Senior Engineer I                    $1,400        $280 Engineer                            $ 500        $100 Computer Analyst                    $ 500        $100
                                            $2,400        $480
: 3)    Government-furnished and contractor-acquired property ($50,000 or more) - $60,000 Prototype Spectrometer - item number 1000-01 = $60,000
: 4)    Government-furnished and contractor-acquired property (under $50,000), Materials, and 8
 
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
Supplies - $2,000 10 Radon tubes @ $110.00                      = $1,100 6 Pairs Electrostatic gloves @ $150.00        = $ 900
                                                    $2,000
: 5)  Premium Pay - $150 Walter Murphy - 10 hours @ $10.00 Per Hour (Reg. Pay) = $100 x 1.5 OT rate = $150 (EX: Premium pay for this individual was approved and authorized under this contract by the NRC Contracting Officer by letter dated 6/1/2011.)
: 6)  Consultants' Fee - $100 Dr. Carney - 1 hour fully-burdened @ $100 = $100
: 7)  Travel - $2,640 (i)    Airfare: (2 Roundtrip trips for 1 person @ $300 per r/t ticket)
Start Date      End Date        Days From                    To        Cost 4/1/2011        4/7/2011        7      Philadelphia, PA      Wash, D.C. $300 7/1/2011        7/8/2011        8      Philadelphia, PA      Wash, D.C. $300 (ii)    Per Diem: $136/day x 15 days = $2,040
: 8)  Subcontracting - $30,000 Company A                = $10,000 Company B                = $20,000
                              $30,000 (EX: Subcontracts for Companies A & B were consented to by the Contracting Officer by letter dated 6/15/2011.)
: 9)  Other Costs - $5,100 Honorarium for speaker at American Nuclear Society conference = $5,000 Nuclear Planet Journal subscription fee = $100
: 10) Overhead Expense - $41,148 Overhead @ 40% of Total Direct Costs
: 11) General and Administrative (G&A) Expense - $22,784 9
 
Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)
G&A @ 20% of Total Costs, excluding subcontracts and consultants
: 12) Fixed-Fee - $8,218 Fixed-Fee applied to Total Costs @ 5%
Fixed-Fee Calculations:
: i. Total contract fixed-fee $100,000 ii. 85% allowable fee $85,000 iii. Cumulative fee billed on prior invoices $85,000 iv. Fee due this invoice (not to exceed 85% of fee earned based upon negotiated contract fee percentage) $8,218 Total Amount Billed          $175,020 Adjustments (+/-)            - $8,218 Grand Total                  $166,802 10}}

Latest revision as of 11:35, 20 October 2019

Instructions Billing Instructions for Cost Plus Fixed Fee Contracts
ML18318A407
Person / Time
Issue date: 11/16/2018
From:
Office of Administration
To:
References
OEDO-18-00479, OIG-18-A-17
Download: ML18318A407 (10)


Text

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

General: During performance and through final payment of this contract, the contractor is responsible for the accuracy and completeness of data within the System for Award Management (SAM) database and for any liability resulting from the Governments reliance on inaccurate or incomplete SAM data.

The contractor shall prepare invoices/vouchers for reimbursement of costs in the manner and format described herein. FAILURE TO SUBMIT INVOICES/VOUCHERS IN ACCORDANCE WITH THESE INSTRUCTIONS MAY RESULT IN REJECTION OF THE INVOICE/VOUCHER AS IMPROPER.

Standard Forms: Reimbursement requests shall be submitted on the payee's letterhead, invoice/voucher, or on the Government's Standard Form 1034, "Public Voucher for Purchases and Services Other than Personal," and Standard Form 1035, "Public Voucher for Purchases Other than Personal--Continuation Sheet."

Electronic Invoice/Voucher Submissions: The preferred method of submitting invoices/vouchers is electronically to the Department of Treasurys Administrative Resource Center, via email to: NRC@fiscal.treasury.gov.

Hard-Copy Invoice/Voucher Submissions: If you submit a hard-copy of the invoice/voucher, a signed original and supporting documentation shall be submitted to the following address:

Fiscal Accounting Program, Admin & Training Group Avery Street A3-G Bureau of the Fiscal Service PO Box 1328 Parkersburg WV 26106-1328 Purchase of Capital Property: ($50,000 or more with life of one year or longer)

Contractors must report to the Contracting Officer, electronically, any capital property acquired with contract funds having an initial cost of $50,000 or more, in accordance with procedures set forth in NRC Management Directive (MD).

Agency Payment Office: Payment will continue to be made by the office designated in the contract in Block 12 of the Standard Form 26, or Block 25 of the Standard Form 33, whichever is applicable.

Frequency: The contractor shall submit requests for reimbursement once each month, unless otherwise authorized by the Contracting Officer.

Format: Invoices/Vouchers shall be submitted in the format depicted on the attached sample form entitled "Invoice/Voucher for Purchases and Services Other Than Personal". Alternate formats are permissible only if they address all requirements of the Billing Instructions. The 1

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018) instructions for preparation and itemization of the invoice/voucher are included with the sample form.

Task Order Contracts: The contractor must submit a separate invoice/voucher for each individual task order with detailed cost information. This includes all applicable cost elements and other items discussed in paragraphs (a) through (s) of the attached instructions. In addition, the invoice/voucher must specify the contract number, and the NRC-assigned task/delivery order number.

Billing of Costs after Expiration of Contract: If costs are incurred during the contract period and invoiced after the contract has expired, you must cite the period during which these costs were incurred. To be considered a proper expiration invoice/voucher, the contractor shall clearly mark it "EXPIRATION INVOICE" or EXPIRATION VOUCHER".

Final invoices/vouchers shall be marked "FINAL INVOICE" or "FINAL VOUCHER".

Currency: Invoices/Vouchers must be expressed in U.S. Dollars.

Supersession: These instructions supersede previous Billing Instructions for Cost-Reimbursement Type Contracts (FEB 2018).

2

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

INVOICE/VOUCHER FOR PURCHASES AND SERVICES OTHER THAN PERSONAL (SAMPLE FORMAT - COVER SHEET)

1. Official Agency Billing Office Fiscal Accounting Program, Admin & Training Group Avery Street A3-G Bureau of the Fiscal Service PO Box 1328 Parkersburg WV 26106-1328
2. Invoice/Voucher Information
a. Payee's DUNS Number or DUNS+4. The Payee shall include the Payees Data Universal Number (DUNS) or DUNS+4 number that identifies the Payees name and address. The DUNS+4 number is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the Payee to identify alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.
b. Taxpayer Identification Number. The Payee shall include the Payees taxpayer identification number (TIN) used by the Internal Revenue Service (IRS) in the administration of tax laws.

(See IRS Web site:

http://www.irs.gov/Individuals/International-Taxpayers/Taxpayer-Identification-Numbers-(TIN)).

c. Payees Name and Address. Show the name of the Payee as it appears in the contract and its correct address. Where the Payee is authorized to assign the proceeds of this contract in accordance with the clause at Federal Acquisition Regulation (FAR) 52.232-23 Assignment of Claims, the Payee shall require as a condition of any such assignment, that the assignee shall register separately in the System for Award Management (SAM) database at http://sam.gov and shall be paid by EFT in accordance with the terms of this contract. See FAR 52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
d. Contract Number. Insert the NRC contract number (including Enterprise-wide Contract (EWC)), GSA Federal Supply Schedule (FSS), Governmentwide Agency Contract (GWAC) number, or Multiple Agency Contract (MAC) number, as applicable.
e. Task Order Number. Insert the task/delivery order number (If Applicable). Do not include more than one task order per invoice or the invoice may be rejected as improper.
f. Invoice/Voucher. The appropriate sequential number of the invoice/voucher, beginning with 001 should be designated. Contractors may also include an individual internal accounting number, if desired, in addition to the 3-digit sequential number.
g. Date of Invoice/Voucher. Insert the date the invoice/voucher is prepared.

3

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

h. Billing Period. Insert the beginning and ending dates (day, month, year) of the period during which costs were incurred and for which reimbursement is requested.
i. Description of Deliverables. Provide a brief description of supplies or services, quantity, unit cost, and total cost.
j. Work Completed. Provide a general summary description of the services performed or products submitted for the invoice period and specify the section or Contract Line Item Number (CLIN) or SubCLIN in the contract pertaining to the required deliverable(s).
k. Shipping. Insert weight and zone of shipment, if shipped by parcel post.
l. Charges for freight or express shipments. Attach prepaid bill if shipped by freight or express.
m. Instructions. Include instructions to consignee to notify the Contracting Officer of receipt of shipment.
n. For Indefinite Delivery contracts, the final invoice/voucher shall be marked "FINAL INVOICE or "FINAL VOUCHER".
o. Final invoices must include the name of the NRC Contracting Officers Representative (COR) and Contracting Officer.
p. Direct Costs. Insert the amount billed for the following cost elements, adjustments, suspensions, and total amounts, for both the current billing period and for the cumulative period (from contract inception to end date of this billing period). The contractor shall not bill at rates that have not been incorporated into the contract by formal modification.

(1) Direct Labor. This consists of salaries and wages paid (or accrued) for direct performance of the contract itemized as follows:

Labor Staff Hours Cumulative Category Assigned Billed Rate Total Hours Billed (2) Fringe Benefits. This represents fringe benefits applicable to direct labor and billed as a direct cost. Where a rate is used indicate the rate. Fringe benefits included in direct labor or in other indirect cost pools should not be identified here.

(3) Contractor-acquired property ($50,000 or more). List each item costing $50,000 or more and having a life expectancy of more than one year. List only those items of equipment for which reimbursement is requested. For each such item, list the following (as applicable): (a) an item description, (b) manufacturer, (c) model number, (d) serial 4

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018) number, (e) acquisition cost, (f) date of purchase, and (g) a copy of the purchasing document.

(4) Contractor-acquired property (under $50,000), Materials, and Supplies. These are equipment other than that described in (3) above, plus consumable materials and supplies. List by category. List items valued at $1,000 or more separately. Provide the item number for each piece of equipment valued at $1,000 or more.

(5) Premium Pay. This enumeration in excess of the basic hourly rate. (Requires written approval of the Contracting Officer.)

(6) Consultant Fee. The supporting information must include the name, hourly or daily rate of the consultant, and reference the NRC approval (if not specifically approved in the original contract).

(7) Travel. Total costs associated with each trip must be shown in the following format:

Start Date Destination Costs From To From To $

(Must include separate detailed costs for airfare, per diem, and other transportation expenses. All costs must be adequately supported by copies of receipts or other documentation.)

(8) Subcontracts. Include separate detailed breakdown of all costs paid to approved subcontractors during the billing period.

(9) Other Costs. List all other direct costs by cost element and dollar amount separately.

q. Indirect Costs (Overhead and General and Administrative Expense). Cite the formula (rate and base) in effect in accordance with the terms of the contract, during the time the costs were incurred and for which reimbursement is requested.
r. Fixed-Fee. If the contract provides for a fixed-fee, it must be reimbursed as indicated in the contract. Cite the formula or method of computation. Include this information as it applies to individual task orders as well.

(1) The NRC will withhold payment of 15% of the negotiated contract fixed-fee amount, not to exceed $100,000.

5

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

(2) If the fee withholding amount has reached $100,000, the contractor may resume billing the NRC for the balance of its fee under subsequent invoices for work completed.

(3) Any fee amounts withheld by the NRC will be paid to the contractor during contract closeout in increments, following the submission/settlement of indirect rate proposals in accordance with FAR 52.216-8, Fixed Fee (JUN 2011).

s. Total Amount Billed. Insert columns for total amounts for the current and cumulative periods.
t. Adjustments. Insert columns for any adjustments, including outstanding suspensions for deficient or defective products or nonconforming services, for the current and cumulative periods.
u. Grand Totals.

6

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

3. Sample Invoice/Voucher Information Sample Invoice/Voucher Information (Supporting Documentation must be attached)

This invoice/voucher represents reimbursable costs for the billing period from _ through _ .

Amount Billed Current Period Cumulative (a) Direct Costs (1) Direct labor $_________ $_________

(2) Fringe benefits (% of direct labor) $_________ $_________

(3) Government property ($50,000 or more) $_________ $_________

(4) Government property, Materials, and Supplies (under $50,000 per item) $_________ $_________

(5) Premium pay (NRC approved overtime) $_________ $_________

(6) Consultants Fee $_________ $_________

(7) Travel $_________ $_________

(8) Subcontracts $_________ $_________

(9) Other costs $_________ $_________

Total Direct Costs: $_________ $_________

(b) Indirect Costs (provide the rate information applicable to your firm)

(10) Overhead  % of (Indicate Base) $_________ $_________

(11) General and Administrative (G&A)  %

of (Indicate Base) $_________ $_________

Total Indirect Costs: $_________ $_________

(c) Fixed-Fee:

(12) Fixed-Fee Calculations:

i. Total negotiated contract fixed-fee percent___ and amount $_________

ii. 85% allowable fee amount $_________

iii. Cumulative fee billed on prior invoices $_________

iv. Fee due this invoice (not to exceed 85% of fee earned based upon negotiated contract fee percentage) $_________

Note: The fee balance withheld by NRC may not exceed $100,000.

7

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

Total Fixed-Fee: $_________ $_________

(d) Total Amount Billed $_________ $_________

(e) Adjustments (+/-) $_________ $_________

(f) Grand Total $_________ $_________

(The invoice/voucher format provided above must include information similar to that included below in the following to ensure accuracy and completeness.)

SAMPLE SUPPORTING INFORMATION The budget information provided below is for format purposes only and is illustrative.

Cost Elements:

1) Direct Labor - $2,400 Labor Staff Hours Cumulative Category Assigned Billed Rate Total Hours Billed Senior Engineer I Pete Smith 100 $14.00 $1,400 975 Engineer Rob Johnson 50 $10.00 $ 500 465 Computer Analyst John Roberts 100 $ 5.00 $ 500 320

$2,400 1,760 hrs.

2) Fringe Benefits - $480 Fringe @ 20% of Direct Salaries Labor Fringe Category Salaries Amount Senior Engineer I $1,400 $280 Engineer $ 500 $100 Computer Analyst $ 500 $100

$2,400 $480

3) Government-furnished and contractor-acquired property ($50,000 or more) - $60,000 Prototype Spectrometer - item number 1000-01 = $60,000
4) Government-furnished and contractor-acquired property (under $50,000), Materials, and 8

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

Supplies - $2,000 10 Radon tubes @ $110.00 = $1,100 6 Pairs Electrostatic gloves @ $150.00 = $ 900

$2,000

5) Premium Pay - $150 Walter Murphy - 10 hours1.157407e-4 days <br />0.00278 hours <br />1.653439e-5 weeks <br />3.805e-6 months <br /> @ $10.00 Per Hour (Reg. Pay) = $100 x 1.5 OT rate = $150 (EX: Premium pay for this individual was approved and authorized under this contract by the NRC Contracting Officer by letter dated 6/1/2011.)
6) Consultants' Fee - $100 Dr. Carney - 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> fully-burdened @ $100 = $100
7) Travel - $2,640 (i) Airfare: (2 Roundtrip trips for 1 person @ $300 per r/t ticket)

Start Date End Date Days From To Cost 4/1/2011 4/7/2011 7 Philadelphia, PA Wash, D.C. $300 7/1/2011 7/8/2011 8 Philadelphia, PA Wash, D.C. $300 (ii) Per Diem: $136/day x 15 days = $2,040

8) Subcontracting - $30,000 Company A = $10,000 Company B = $20,000

$30,000 (EX: Subcontracts for Companies A & B were consented to by the Contracting Officer by letter dated 6/15/2011.)

9) Other Costs - $5,100 Honorarium for speaker at American Nuclear Society conference = $5,000 Nuclear Planet Journal subscription fee = $100
10) Overhead Expense - $41,148 Overhead @ 40% of Total Direct Costs
11) General and Administrative (G&A) Expense - $22,784 9

Version Control Date: September 20, 2018 BILLING INSTRUCTIONS FOR COST-REIMBURSEMENT TYPE CONTRACTS (SEPTEMBER 2018)

G&A @ 20% of Total Costs, excluding subcontracts and consultants

12) Fixed-Fee - $8,218 Fixed-Fee applied to Total Costs @ 5%

Fixed-Fee Calculations:

i. Total contract fixed-fee $100,000 ii. 85% allowable fee $85,000 iii. Cumulative fee billed on prior invoices $85,000 iv. Fee due this invoice (not to exceed 85% of fee earned based upon negotiated contract fee percentage) $8,218 Total Amount Billed $175,020 Adjustments (+/-) - $8,218 Grand Total $166,802 10