ML071310042: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 5: | Line 5: | ||
| author name = Rice T | | author name = Rice T | ||
| author affiliation = State of NY, Dept of Environmental Conservation | | author affiliation = State of NY, Dept of Environmental Conservation | ||
| addressee name = Donahue P | | addressee name = Donahue P | ||
| addressee affiliation = Entergy Nuclear Operations, Inc, NRC/NRR | | addressee affiliation = Entergy Nuclear Operations, Inc, NRC/NRR | ||
| docket = 05000247, 05000286 | | docket = 05000247, 05000286 | ||
Revision as of 00:28, 13 July 2019
| ML071310042 | |
| Person / Time | |
|---|---|
| Site: | Indian Point  |
| Issue date: | 02/08/2007 |
| From: | Rice T State of NY, Dept of Environmental Conservation |
| To: | Donahue P Entergy Nuclear Operations, Office of Nuclear Reactor Regulation |
| References | |
| FOIA/PA-2007-0166 | |
| Download: ML071310042 (2) | |
Text
-age 1 ot z John White -RE: IPEC CSS Split Sample From: "Timothy Rice" <tbrice@gw.dec.state.ny.us>
To: "Patrick J Donahue" <PDonahu@entergy.com>
Date: 02/08/2007 2:15 PM
Subject:
RE: IPEC CSS Split Sample CC: "Robert P. Snyder" <rps02@health.state.ny.us>, "James Noggle"<JDN@nrc.gov>, "John White" <JRW1@nrc.gov>
Pat, Thanks for the clarification.
I had understood that you were getting about a 1/2 gallon a minute.I will inform DOH about the low flow issue and let them decide if they want a 1/2 gallon or a gallon.I don't want to tie up everyone for that long if they can live with the 1/2 gallon.Actually, if they were able to do all the rad parameters with the original liter, we can probably limit this one to just the 1 liter amber glass PCB sample.I will let you know.Thanks Again, Tim>>> "Donahue, Patrick J" <PDonahu@entergy.com>
2/8/07 2:07:13 PM >>>Tim, My understanding from talking with the sample tech is that the well was at first providing 8 oz/min. However after purging the CSS well became rather unproductive.
As it is it took several hours to collect the one liter samples provided.
In the end I am hoping that it is just a matter of putting in the necessary time to obtain additional volume. I'll speak to GZA about our needs and stress importance of capturing the required volumes.Best, Pat From: Timothy Rice [mailto:tbrice@gw.dec.state.
ny. us]Sent: Thursday, February 08, 2007 1:56 PM To: Donahue, Patrick I Cc: Robert P. Snyder; James Noggle; John White
Subject:
IPEC CSS Split Sample Pat, Got your voice message and the address for the sample containers.
Entergy Indian Point Energy Center 450 Broadway, Suite 3 Buchanan, NY 10511 attn: Pat Donahue I will provide the address to DOH and they can send out the sample containers.
The issue is two-fold:-First, we only received 1 liter (we had been asking for 1 gallon. A 1/2 gallon is adequate w/o added analytes, but requires proper sequencing of analyses in the lab). 1 L is barely enough for all the rad parameters, and leaves no aliquot for contingencies.
-Second, our RCRA program would like to perform a PCB split for the CSS. DOH has agreed to perform the analysis for us and would like to use their own containers, so they will be sent to you.file://C:\temp\GW
}OOOO1 .HTM 04/09/2007 F'age z or z Yes, I would appreciate it if the NRC could observe this split, if possible.I am 'sending this e-mail to John White and Jim Noggle as well in case they would like to participate, and to determine if their Resident can accommodate us. If not I will get back to you to try to make other arrangements.
thanks, Tim file://C:\temp\GW100001.HTM 04/09/2007