ML16095A291: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
 
Line 1: Line 1:
{{Adams
#REDIRECT [[RS-16-078, Clarification to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds]]
| number = ML16095A291
| issue date = 04/04/2016
| title = Braidwood and Byron - Clarification to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove
| author name = Gullott D M
| author affiliation = Exelon Generation Co, LLC
| addressee name =
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000454, 05000455, 05000456, 05000457
| license number = NPF-037, NPF-066, NPF-072, NPF-077
| contact person =
| case reference number = RS-16-078
| document type = Letter, Response to Request for Additional Information (RAI)
| page count = 3
}}
 
=Text=
{{#Wiki_filter:RS-16-078 10 CFR 50.55a April 4, 2016 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D.C. 20555-0001 Braidwood Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-72 and NPF-77 NRC Docket Nos. STN 50-456 and STN 50-457 Byron Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-37 and NPF-66 NRC Docket Nos. STN 50-454 and STN 50-455
 
==Subject:==
Clarification to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)
 
==References:==
: 1) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U.S. Nuclear Regulatory Commission, "Requests for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Retaining Partial-Penetration J-Groove Welds," dated September 11, 2015 2) Email from J. Wiebe (NRC) to J. Krejcie (Exelon Generation Company, LLC), Preliminary Request for Additional Information Regarding the Braidwood and Byron Requests for Relief Regarding Repair of Reactor Vessel Head Penetration J-Groove Welds, dated January 6, 2016 3) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U.S. Nuclear Regulatory Commission, "Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration Groove Welds," dated February 11, 2016 4) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U. S. Nuclear Regulatory Commission, "Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)" dated March 15, 2016 April 4, 2016 U.S. Nuclear Regulatory Commission Page2 5) Letter from D. M. Gullett (Exelon Generation Company, LLC) to U. S. Nuclear Regulatory Commission, "Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)" dated March 22, 2016 6) Email from E. Brown (NRC) to J. Krejcie (Exelon Generation Company, LLC) "Draft: Byron/Braidwood Request for Additional Information," dated March 31, 2016 In accordance with 10 CFR 50.55a, "Codes and standards," paragraph (z)(1), Exelon Generation Company, LLC (EGC), requested relief from the requirements of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (B&PV Code) specifically related to the repair of the degraded reactor vessel closure head (RVCH) penetration nozzles and their associated partial penetration J-groove attachment welds. Specifically, the relief request proposed to perform an alternative repair technique using the Areva Inside Diameter Temper Bead (IDTB) welding method to restore the pressure boundary of a degraded nozzle. EGC submitted this request to the NRC in Reference
: 1. Subsequent to submittal of Reference 1, the NRC requested additional information to support the review of the subject relief request (Reference 2). EGC responded to the questions in the Reference 3 transmittal.
The Reference 3 transmittal was supplemented with two additional letters, References 4 and 5. In Reference 6, the NRC requested clarification on the References 3, 4 and 5 transmittals.
A teleconference was held with NRC staff members on March 31, 2016, where the Reference 6 questions were discussed.
Clarification was provided for the questions included in Reference 6 and the NRC requested a letter from EGC to transmit the response for Question 5. The response to Question 5 is provided below. Question 5 of Reference 6 stated: "Section 4.4 [of Reference 5 Attachment 1] address[ es] the weld anomaly flaw evaluation.
Clarify whether the NB-3227.2 of Section Ill criteria used for cylindrical flaw propagating in the new weld metal is more stringent than the LEFM criteria (fracture toughness margins)." EGC Response:
The triple-point weld anomaly analysis considers a cylindrical flaw in the Alloy 52/52M/52MSS weld metal. The weld metal is an austenitic material, and it is a non-flux weld. Guidance on how to evaluate the hypothetical flaw in the weld metal is taken from ASME Section XI, Appendix C Article C-4000 "Determination of Failure Mode." As noted in Paragraph C-4210 as well as Figure C-4210-1, plastic collapse is the controlling failure mode for austenitic, non-flux weld material.
Linear Elastic Fracture Mechanics (LEFM) is the controlling failure mode only for ferritic material under some loading circumstances, as noted in Paragraph C-4221. Therefore, LEFM criteria are not applicable for the postulated cylindrical flaw in the non-flux weld.
April 4, 2016 U.S. Nuclear Regulatory Commission Page 3 The loading applied to the triple-point weld anomaly cylindrical flaw is a shear load, caused primarily by end cap pressure forces acting on the nozzle. An appropriate and conservative evaluation for the plastic collapse load due to shear is found in ASME Section Ill, Paragraph NB-3227.2.
Therefore, the NB-3227.2 methodology is selected for evaluating the postulated cylindrical flaw in the non-flux weld. There are no regulatory commitments contained within this letter. Should you have any questions concerning this letter, please contact Ms. Jessica Krejcie at (630) 657-2816.
Respectfully, Dr David M. Gullatt Manager -Licensing Exelon Generation Company, LLC cc: NRC Regional Administrator, Region Ill NRC Senior Resident Inspector, Braidwood Station NRC Senior Resident Inspector, Byron Station Illinois Emergency Management Agency -Division of Nuclear Safety RS-16-078 10 CFR 50.55a April 4, 2016 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D.C. 20555-0001 Braidwood Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-72 and NPF-77 NRC Docket Nos. STN 50-456 and STN 50-457 Byron Station, Units 1 and 2 Renewed Facility Operating License Nos. NPF-37 and NPF-66 NRC Docket Nos. STN 50-454 and STN 50-455
 
==Subject:==
Clarification to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)
 
==References:==
: 1) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U.S. Nuclear Regulatory Commission, "Requests for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Retaining Partial-Penetration J-Groove Welds," dated September 11, 2015 2) Email from J. Wiebe (NRC) to J. Krejcie (Exelon Generation Company, LLC), Preliminary Request for Additional Information Regarding the Braidwood and Byron Requests for Relief Regarding Repair of Reactor Vessel Head Penetration J-Groove Welds, dated January 6, 2016 3) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U.S. Nuclear Regulatory Commission, "Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration Groove Welds," dated February 11, 2016 4) Letter from D. M. Gullatt (Exelon Generation Company, LLC) to U. S. Nuclear Regulatory Commission, "Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)" dated March 15, 2016 April 4, 2016 U.S. Nuclear Regulatory Commission Page2 5) Letter from D. M. Gullett (Exelon Generation Company, LLC) to U. S. Nuclear Regulatory Commission, "Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds (RS-16-045)" dated March 22, 2016 6) Email from E. Brown (NRC) to J. Krejcie (Exelon Generation Company, LLC) "Draft: Byron/Braidwood Request for Additional Information," dated March 31, 2016 In accordance with 10 CFR 50.55a, "Codes and standards," paragraph (z)(1), Exelon Generation Company, LLC (EGC), requested relief from the requirements of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (B&PV Code) specifically related to the repair of the degraded reactor vessel closure head (RVCH) penetration nozzles and their associated partial penetration J-groove attachment welds. Specifically, the relief request proposed to perform an alternative repair technique using the Areva Inside Diameter Temper Bead (IDTB) welding method to restore the pressure boundary of a degraded nozzle. EGC submitted this request to the NRC in Reference
: 1. Subsequent to submittal of Reference 1, the NRC requested additional information to support the review of the subject relief request (Reference 2). EGC responded to the questions in the Reference 3 transmittal.
The Reference 3 transmittal was supplemented with two additional letters, References 4 and 5. In Reference 6, the NRC requested clarification on the References 3, 4 and 5 transmittals.
A teleconference was held with NRC staff members on March 31, 2016, where the Reference 6 questions were discussed.
Clarification was provided for the questions included in Reference 6 and the NRC requested a letter from EGC to transmit the response for Question 5. The response to Question 5 is provided below. Question 5 of Reference 6 stated: "Section 4.4 [of Reference 5 Attachment 1] address[ es] the weld anomaly flaw evaluation.
Clarify whether the NB-3227.2 of Section Ill criteria used for cylindrical flaw propagating in the new weld metal is more stringent than the LEFM criteria (fracture toughness margins)." EGC Response:
The triple-point weld anomaly analysis considers a cylindrical flaw in the Alloy 52/52M/52MSS weld metal. The weld metal is an austenitic material, and it is a non-flux weld. Guidance on how to evaluate the hypothetical flaw in the weld metal is taken from ASME Section XI, Appendix C Article C-4000 "Determination of Failure Mode." As noted in Paragraph C-4210 as well as Figure C-4210-1, plastic collapse is the controlling failure mode for austenitic, non-flux weld material.
Linear Elastic Fracture Mechanics (LEFM) is the controlling failure mode only for ferritic material under some loading circumstances, as noted in Paragraph C-4221. Therefore, LEFM criteria are not applicable for the postulated cylindrical flaw in the non-flux weld.
April 4, 2016 U.S. Nuclear Regulatory Commission Page 3 The loading applied to the triple-point weld anomaly cylindrical flaw is a shear load, caused primarily by end cap pressure forces acting on the nozzle. An appropriate and conservative evaluation for the plastic collapse load due to shear is found in ASME Section Ill, Paragraph NB-3227.2.
Therefore, the NB-3227.2 methodology is selected for evaluating the postulated cylindrical flaw in the non-flux weld. There are no regulatory commitments contained within this letter. Should you have any questions concerning this letter, please contact Ms. Jessica Krejcie at (630) 657-2816.
Respectfully, Dr David M. Gullatt Manager -Licensing Exelon Generation Company, LLC cc: NRC Regional Administrator, Region Ill NRC Senior Resident Inspector, Braidwood Station NRC Senior Resident Inspector, Byron Station Illinois Emergency Management Agency -Division of Nuclear Safety}}

Latest revision as of 23:21, 6 April 2019

Redirect to:

Retrieved from "https://kanterella.com/w/index.php?title=ML16095A291&oldid=1414238"