View source for RS-08-152, Supplemental Information Concerning Relief Request CR-26 Associated with the Second 10-Year Inservice Inspection (ISI) Interval

{{Adams
| number = ML083260525
| issue date = 11/18/2008
| title = Supplemental Information Concerning Relief Request CR-26 Associated with the Second 10-Year Inservice Inspection (ISI) Interval
| author name = Simpson P
| author affiliation = Exelon Generation Co, LLC, Exelon Nuclear
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000373, 05000374
| license number = NPF-011, NPF-018
| contact person = 
| case reference number = RS-08-152
| document type = Letter type:RS
| page count = 437
| project = 
| stage = Supplement
}}

=Text=
{{#Wiki_filter:Exelon Generation                  www.exeloncorp.com Exelkn   Nuclear 4300 Winfield Road Warrenville, IL60555 10 CFR 50.55a RS-08-152 November 18, 2008 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D. C. 20555 LaSalle County Station, Units 1 and 2 Facility Operating License Nos. NPF-1 1 and NPF-1 8 NRC Docket Nos. 50-373 and 50-374

==Subject:==
Supplemental Information Concerning Relief Request CR-26 Associated with the Second 10-Year Inservice Inspection (ISI) Interval

==Reference:==
Letter from Patrick R. Simpson (Exelon Generation Company, LLC) to the NRC, "Relief Request CR-26, Inservice Inspection Program Relief Regarding Examination Coverage for Second 10-Year Inservice Inspection Interval," dated October 1, 2008 In the referenced letter, Exelon Generation Company, LLC (EGC), requested relief from the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," for LaSalle County Station (LSCS) Units 1 and 2. Specifically, CR-26 requested relief on the basis that compliance with the specified requirements is impractical due to plant design. This relief applies to the second 10-year interval inservice inspection program, which concluded on October 1, 2007.
In a teleconference on November 6, 2008, EGC agreed to provide supplemental information to the NRC regarding relief request CR-26. This supplemental information is provided in the attachment to this letter.
This letter contains no regulatory commitments. If you have any questions regarding this letter, please contact Ms. Tricia A. Mattson at (630) 657-2813.
Respectfully, atrick R. mpson Manager - Licensing

==Attachment:==
Supplemental Information Regarding Relief Requests Associated With the Second Inservice Inspection Interval - LaSalle County Station, Units 1 and 2

November 18, 2008 U. S. Nuclear Regulatory Commission Page 2 cc:    Regional Administrator - NRC Region III NRC Senior Resident Inspector - LaSalle County Station

Attachment Supplemental Information LaSalle County Station Units 1 and 2 Relief Request CR-26

REVI           'me 44e-22o               W46 91            &C0 SEt 0          c,7e          A      E1.fjZI4  NI       Brou"Tht      Upto        154      /417
_ ....__  -*     i -4 2oQ- "   *   *s", tu  ,,
                                                                                         #at f*.       i, /    -, 4ete l     ,.,A                                             WFC 1- 7-76 Pc. No. Prefix                                                                                     Pc. No. Prefix D.W.P.              and                                                                        D.W.P.                      and Weld No. Suffix  Dwg. No.                   Title                             Dwg. No.            Weld No. SuffixI Dwg. No.               _'itle Dwg. No.
301         E- 232- 7883 General Arrangement - Elevation 302         E-232- 843 General ArsngemePt - Plans A-245-515            303         E-232- 898 Stainlees Steel Safe Ends 304 305         E-232-789     vessel Shells Forming & Fit-up A-245-830            3o6                       Bottom Head Machining & Welding 307 E-2320"       Lower Vessel Shell Ass'y. Machinilng and A-245-831                        E-232-790 Welding A-245-832            308         E-232-791     Upper Vessel Shell Ass'y. Machining and Welding A-245-833            309         E-23?-861 Vessel Support Skirt - Details & Ass'y.
A-245-834            310         E-232-862 Bottom Head--Penetrations 311         E-232-792 Vessel Machining A-245-836            312         E-232-793 Vessel Machining A-245-837            313         E-232-794 Vessel Assembly A-245-838            314         E-232-879 Nozzle Details A-245-839            315         E-2132e93Q Nozzle Details                                                                           A-200-263         Miscellaneous Repairs and                     ;'emporar[;
316         E-232-863 Nozzle Details                                                                                              Attachments (DWP)
A-245-84o A-245-841            317         E=232-880 Nozzle Details                                                                            A-200-081         Standard Notes A-245-842            318         E-232-839 'loSure Head Nozzle Details                                                               A-200-083         Material Notes A-245-843            319         E-232-911 Closure Head Machining & Welding                                                          A-200-085         M&P Specs.
320         E-232-801 Closure Head Final Machining                                         h                 I _________        I A-245-845            321         E-232-936 Miscellaneous Details 322         F-233-814 Miscellaneous Details 323         E-232-795 Vessel Internal Attachments A-245-847            324         E-232-796 Vessel External Attachments A-245-849            325         E-232-797 Vessel External Attachments 326         E-232- 923 Stud, Nut, and Washer Details A-245-851            327         E-232- 937 Shroud Support, Details & Ass'y.
A-245-852            328         E-232-840 Nozzle Thermal Liners A-245-853            329        E.232-802 In--Service Inspectign Patchbu A-245-854            330         E-232-924 Mat'l. for Fabricating Test Specimen 331         E-232-799     Mat'l. Identification 332         E-232-781     As-Built Dimensions E-232-782     As-Built Dimensions - Bot. Hd. Penet.
333 334         E-232-928 Closure Head Shipping Details & Ass'y.
335         E-232-841 Nozzle Shipping Covers                                                                                               o-   ,CHATTANOOGA              to,-       286'(
A-245-857            336         R-232-930 Flange Cover Details & Ass'y.                                                                                                 SRAWING PLAR- LT-A-245-858            337         P-232-931 Lifting Beam Details & Ass'y.
A-24 5-8 59          338         R-232-932 Vessel Upending Device & Lower Cover Details & Ass'y.                                                                                                 _. NERAL ELECTiRIC CO.
251" I.D. B-TI 339         E-232-933 Vessel Shipping Rig Details 340         E-232-847 Vessel Shipping Assay.
V       341        E-232-814 Shipping Arrangement on Barge 2-?45-863         342        E-232- 939 Miscellaneous Shipping Details                                                                                     COMBUSTIO   "'~ '..w,-  .Ik~nf'o I.N ENGIEERIN.    ,NC.. WINDSOR.CONN.
I-      343         E-232-800 Modified Vessel Shipping Rig Assembly A-*2.4..-94-9           .344        E-232-02 LIT ICALISRKTION8 BLOCV tETKILS                                                                          11        ORAWINO D      -
NO NO  .
n~~nkaL..
                                                                                                                                                                                   -2 *-       -
V-W7I7'&#xfd;%

I     7                            6                                      5                 I -<                                4 I
.109"ZCz-:3 4,4
                                                                                                                            ~7A~L  t'(B-SJ 04fl0' SCA4E
            .7 441 41 0~
                                                                                         'o)
Amr Ti C~404W       ~           AM                             v/43WO/Gj a,6,~-     ~       4 0' DA'a I
27d-~
V4-4 EED*3.7O
                                                                      -"-S    't.9)
                                              -'       - ---                                              J71
                                                                                                                                                                                            -- I, i i
                                                                                                                                ,                          I M9r=ES C-A'FA',4 0f L 444M4                r      = 0     ZrW)-WACT          4/   L-          .LU3 I            4~~0C~054   C0
* S0  ~~rzzZ M7~1     CLOSURqEHEADOF7AAL K
MACHINING N-        ic 01 O
A fl
                                                                                                                                                             *~     ~          1232iL-801Z3 I        I
_6.                 7

  -                   a--                                            /                                         S               I                                      ,            ~.      4           -          I
                                                                                            /           c.'*             l n_                                                                                          C     AC ~fl
                                                 -        . ..                    " ,                                                                                                                                4. COAtAC atat.' aSs'S I.
____,,_                      k                                   \ \ "\*_                 L                            Tz; ELL-Em 4Q L~ .
                                                                                                                                                                                                                                               * -                     .. 7"/-- .              400'-                   tC_ .       .
tl__2
                                                                                                                                                                                                                                                                                               -i , O~ttr.
                                                                                                                                                                                                             .                                                     I
__o_*_IE/     x,-",'                           *           *          -
                                                                                                                                                                    -,L-"6,-             .                                                                                                                                 SCA&#xfd;C
                                                                                                                                          /D.
                                                                                                                                                                                                                                                              ....,-*AU'. O-Z "4,,i
         ,     I.WI.wr
                                                       .        :L              -       '
* J//                       a.a.
                                                                                                                                       .         .I'                                                                                                                  .*                                                                            FK*
: a.
* j"                      -;-f*'r*.*
: *   . *         "=--.     .'--2f=l:]i
                                                                             .-*-      -...   .   ... '  "     =.:..,-
o.----.,** ...b *
                                *- f,-t--*:*-              -- <':.... . ....
                                                             - ........  .... . ... _ . *... __ _ *                                                :_- ..          -j _*_
__ - _=:*
A ~t   AtrtaAt             07*5 57* ink tao j AVAA~tCA&S 400.4Cr                     -             I aIr                      state      .                                                      -..-     ..                    .                                                                           i    i         i      i                                                        i                 i F A        ~'              SAn 04 5 MatS 550Sf ScwSaSA             -,         '0 A                 *~* '*~* 'P ms          ,,     apACasit       .,     .47
                                                                                                                                                                                                                                                          -             a.tM.,r (AC)      -,
                                                                                                                                                                                                                    'D~~       ~TfeAC~~                'an       SA               70-e isa. -                   I           aSCiT a.       /M5~* S..                                  Car      tat Mraa.ta 4             Ma TA            -                     ST.       -
S    7) .au~aM             ZI                            *7*5   .
74,~     '(65)                                    CAOSSW     'ado           S 'SO-At/Os)                     ta's/k  Men a,'-
                                                                                                                                                                                                                                                  -             -                                                             I
                                                             .A..                  A. - 4A1M                                              --                                      .-                                                                                                                      *                                          -
                                                                                                                                                                                                     .......          I-                              ff.                           a 7A                 A25.
           . -i- _e      .I,..-

5 H
A                                                                                              j   73-                !
                                                                    ;0'm45-.         W-I                       -m1 IJ                                -0               AA                    :   Z"~4 0- . l&#xfd;                                      -                                                         M      DK        3.8 -
G I?-  r                                                 t           lt4                        C7,'
                                           -=EWW                                                              UNA~
33.-a   ~      '.       -a55 AA    A7WY      WL A137OF05-sC AeaSA4V~SAlA                    3 SAtSAE2tosn                                      --
130     /IS   REA-cr-C                                                                           000?'A                                  A eo0 OAAO               A (-'
rv./e~AA,
  -I!""                                                                                                           rl
                         -6     I E2279C6 5                                          -I-i;&#xfd;Wj      &#xfd;    - -

I                 9 a                                                  3              2                                            t II*-*"
H I . !..     ..   ... - ........ .. -  I, .. ,1" '
I    I (AZZE                              IN VENT A~ZZLE ASSEMBlY SAS54-I'-O.
d
                                                                              #'I.W,*AXM 0,      ,
                   -L,    4
* FIRa F       4-a                       ",**
I4~e'aao 3
SSSe    31811                                                                                           vA A'IJMBWVrA7A7 OV
                                                                                   /NST!&#xfd;           IWZ    55              1
                            -ala~~~C~
Ms-       ~z                                                                                                                            C.,
AW, MI    IsIS
                                                                                                                                  -        DW        lMM0      '0
_____________-IS--                                                  '50   C"l    ir     MN
                                                                                                                                                       -ZZ            SMoO.,S                       5 Ma              ,        0I $ S' 'M ft-                         - f M S  T E   2 I  00r tNAJ AS                  0AA..
cm0          Acreso                                                                       .- ,o,-swi W,   A&#xfd;&#xfd;                                                                                                      SO.       ~
O,.'W
                                                                                                               .A.'oWn-                             ~                   232-839 1,.AI~.                        .
a       I                               !1                          3                                               1I                Z.41.t&

P
                                                                                                                                                                                                                                                               ~L~     ,WWSEDFtS'~-3Z  -          t,#
W    ~                          4   44 0                                          'I H
                                                                                                                                                                    -,' ,        -_I*-*               7___ -*----
                                                                                                                                                                                                               - i          _----
F JA,      .         .           --    "   .          -
                                 -o . . . .. .e         o        -           ..
4
                                                                                                                                                                                          '2 i~4o.to.*&#xa3;H o.H~~H     -
I
                                                                                                                                                                                                                                                                                                                   -l I.
                                                                                          ,7       ,                                                                                     -~         -
2    i~
I
                                                                                                                                                                                                                                               *     '&#xa3; A7AtMAS~    ta'AAdtJ     CflvOnr A                                               E~4I           III                                                      j
                                          - t tO r SIAn                                                  tr~q    a   AEZAAt
                                                                                                                                                                                                               ~        ~fu-'
          .7                      410
                                               ,~
                                                                                                                                                                                                                                   &#xfd;_U 7--I sc&r.- 7KWK                                            &~~cAr~                                            I-0' r        WI2A.                                                                    E&#xfd;l "4   .7A I-       I _=1 =I.
                                                                                                                                                                                                                                    .    ... I CtNE2AL A'OTfJ                             Ai'7W1(T &#xa3;tOM~ 'I             LIHC'2    ,'~        &#xb6;i      I2~4       fAAH~'5                          .    ..    .
                                                          .'    -In    An tat.. 2 4.4flO44u-arIzct             -                                      at,-,~       s'.'       ova. ASAK
                                                                                                                                                                                                                                                                                         'I.       -
at    'HWan., tat   ACSMC             0* ALa ct                                                                                                                                            1[-1
                                                                                                                                        *     .               OH                  '2   5-
                                                     ,..W1t
* 44,4w jD.~.rA,4.CoK( ~0O A&#xa3;0 toot Ati aaa 2*7*a? 'H st OW7IS oar,'- ats,.W     .~AS Isaun 23        8...7 H
i 1              "    5
* I
                                                                                                                       --- ~---~-----~---~-.-       -----------*--~--              --             A

                                                                                                                                                                                                                                                                                                                    ---  I          -
A                                                                               N                Ir                                                                                                                 J a          1-                                                                -.1-                                              a
                                                                                                                                                                                                                                                                                       -,      flOw                 3,3.0,                CC      7~0 004710
                                                                                                                                                                                                                                                                                   ~ Cr4 PC3,3-O, AC3,600 #4! C.                  A' iCC         47
                                                                                                                                                                                                                                                                                                              ,Ow$r.iwSa
                                                                                                                                                                                                                                                                                                ~          ~44iC                          -       -
                                                                                                                                                                                                                                                                                       *. ~            it3i5C4 H                                                                                                                                                                                                                                                                                                 ?EOMVAOMO-               -                            H
                ~                                                                                                                                                                                                                                                                                                .,           -          a'
                                                                                                                                                                                                                                                                                    -       ?0CL.
                                                                                                                                                                                                                                                                                    -            -,=-   AC-,n..A,,          -
                ~~dwui                -
                                                                                                                                                                                                                                                                                            ~                  ~                               ,
e~-    2Ww'0'C7'Y'-S5a             ,0 4
                                                                                                                                                                                                                                                                                   -         ~              o~an~O-                         -
30,~=                        J*~mii~~~      -j   -~        ____                ____                  _____
4    .3 40050 a,04C ACACCC     WSTdWfl        "'       ICC
            -     ~0C~                 -
00CC0050              9.EWSA      3.
                                                                                                                                                                                                                                                                                         -, SIw&AC*.40 ~       '0*0                           w~- -
I, F                                      -
A2y 7v ve3sfL7.
                             ~.#A; 4.~C CfDVAL/UC S)Z'~A4 ~4~fA'         MV&'ZF CeflAW:-.flC -r ann            e~na MCCC'rr..-n.
5
    *1. -     ~              -           -
                                       -3
                                                                                                                                                                                                                     -Al Sr         SSEM          -      -_--   -           -_   5rThP'Z I4ACY1VNN qip --   w~                                                 __,44ZC         00           0*'S     -C3~~(CCA xe I
wUk    v 4
A6,   W-          0axx                      .V                          &#xfd;
                                                                                                                                                                                                                                                            $.-g        0         JAOoiaC 4iT00C4440
                                                                                                                                                                                                                                                                                                        ~'-~""~
                                                                                                                                                                                   --                  n~-I0-~---.-                   -
                                                                                                                                                                                                       ,WAC ra I.                                                                            -'a      ..a                                                     -
                                              -     -------.--       ----                                --------------                      -               -------      *44C0_~-'                                                           S.   -            -            --   -               C--'                                 -            _
G6A~eA1      A~7t.Y                            I    OM~L              OA~'1       ~                340C~        ~            --                     ~                                      --                             ~                            -
                                .W*S,           'a   44004.0      ',a~dqg.wWwsr                         tea        &          .flfl              MV.          St *610                                -           .~            -  -
A 3,i     0061t     &#xa3;00 ~ *0 nnfO WI *W~V                           T St? .~
0033, A-~t        A
                                                                                                                                 ,0yS         *  -, ,A.OS   *45 C                                                      -                                          --       ~                           M~'1ZLE --~TAILS
                                 *aen         A.36       AS          0.0*' 00.                       -     --        -    -     -       -      ---.       .        .     .                                                                                                                          V,3,SSAAdttr'
  -       -                     44e0in(nn,.                                                           -       -         -              -=-'-  -- ----  --  -           -'    -                                                                        ...- ,m'----.--     -
rio 54.0 MC MO 30080 OOwWZO wWTCw               40470'                                                                                                           -             --           -                             .rr A4Ce-rr~3~rnaArMCS~W 0,00.580 3.410 CC~*,        3005 1304 toOt MaAIC        C!")
E 232-938 S----                          ----                                -~                              ~2A677ii~                             -                      _
                                                                                                                                                                                                                                                                                                                ~                                     4 0             I                    7                                   -       0  - ~           I-                   5a.                --- A------<'       -.         '-        -    ~                                                                          -       ~0        -

z      4
                      ~  I                      A DE7IX__
I wo                 A 4.
44M5004.4MM   O&#xfd;            Ai* V05)...T, m
                                                     . o                                 *c as                  t WU A3ZA(4C0                       WO 6LCA                      &, aw    wc~,,    wawlg AV    ^,r%,    w-4~~~~~VZ         f 4/4 a44 SCASMOI' O",S                           A45'A 00
                                     &Amrv                                   Alm.s                                       -M-"

II                                                                     II                                   g                                                                                                                         2 A
9                                                                      A                                    3                                            4                                      3                                     I
  -2ve-EEZ-3                                 Jl D_&#xfd; Y  ~           ~            0~
                                                                                                                                                                                                                        -I-c
                                                                                                                                                                                                                                  -s      -
1 .000~7 A..
E   b0ct~-bO.. n~  -
H--
Oft  00711. Wi-PLAA'        LYI
                                                                                                                                                 -       103fr  TO      MEAD
                                                   ~~8OTTO~90 HEA12SEM1Z_1 II, 0C~rej~,C                                                                  30,.70t DETAIL    Do-,)
a' 5.-I.                  -
r--     S/AtM oror                                 30100 ~
                                                                                                                                                           ,                    ~e.
WIMO   WflW
                                                                                                                                    -. 5~,.-         .                                      3'AON    P D                                                                                                                                                                                                                                                                                        D I WELDAVOL O('P           .
C~)                                                                     NOE3 43
                  ..         -          ~710,0.      ae     --o 0CIAO                         '       rCA W l See I  a.-r~~~~o                0      ('.7      -                                  DET~~ZY7AIL      C r-,.                                                       -        .0.s.*,4urr.                  39),nsev A  ------  5-36  -------              ...--
S"O~qt       ..   -    ~
                                                                                      .-- *~.  --                  -  -       -    JC41ret.76-                                     -   -       -
SEC
                                                          -     ~ ~~ ~
                                                                ~
A-
                                                                                               ~          ~    .
                                                                                                                -~&&#xfd;-
                                                                                                                       ~          ~                      ~              ~
                                                                                                                                                                --- ____ ----        ~
S~J#4~T
                                                                                                                                                                                          -       ~ -         ~ 7zz ~               f     j jA sea1f'3  89 0000~~~~~~~~W HWS      0                  a   s        --                             ~-           '00             SW_3
                                                                                                                                                                                                          -     ~f -    0     -               DOMMSLVfa                    Now
__________  a  ~2'a Ra A                2-                                                                                  OfV      .                                       M Vt                                                          -ca~         -Arpc.-
8                                                                                                                            . I! .....                   A4                                                                                                                 r &#xfd;4 I-                                                                              -:-I-K a                                7.            1                                                    1,.
7 am       n~.                p      'Or-a
                                                                                                                                                                                                                                                                                   ~aflS q~                  .. - ... -____
PC ~a54471~40 q                                                                                                                                                                                                                                                    F' "tJ*0 H,
                                                                                                                                                                                                                                                                                 &#xa3;47-a CO'000     ~
                                                                                                                                                                                                                                                                                       .fl,.0000                   e~'Cr
                                ?                                                                                                                                                                                                                                                 V.40 .4~7705>Z0 0tEW OOTTR4SJ j177.                                                                                                                                                                                                              ~,0T&#xa3;407 ,u.         r 05000    7'4~0 .. a 004MOS 0fl.g0'.AtS0070051      t-TAa.t4.
I
                                                                                     ;         -
* La&deg;            zv*                                                                                                                                                                                                      G 1--
8 F
                                ~~i'a             Ve4.
: 0.                      A,'
                                                     ")M0* w4 E
                                                                                                                                                                                                                                                                     -                  74B4E*4
                                                                                                                                                                                                                                                                ~           IN   TOO4V POMPPEMWS&#xa3; 71j 30       r.                                                                                                                       or,      ~                iowan ozoiom        ~                                        ..00OM5000     C rrtT~L...jzzTfv.zzLmxzz
                                                                                                                                                                                                                                                                                                                                               " m* F :
                                                                 .........................              I;-[....        -*'*Y--:'*" =  "'*
                                                                                                                                                                      '-a,
                                                                                                                                                                                               -lt-                                                                 "oF'     I~
D
                                                                                                                                                                                       'I-iM
                                                                                                                                                                                                                         -                                :7 a-.
I                                                                                                                  Zr        .s       '77
                                                                                                                                                                                                                                                                       .     .T. /*5 M8LE                                                                                                                                                               .7S.-
                                                                                                                                                                                       '.-al f
II                                                                                                                                                                                                                                                                                                                                                C
* t..
NsO8 t7A&#xfd;-
fe
:      Z.          ..             *      -*v = ***       * .=** .
___       ,       - -       I      .-- --
T~ . Z 7    '.S     --                                 ... .                .          ..     .       .
                                                                                                                                                "                             .       ..          .     . .  .    .A..          *
                                                                                                                                      -I
-III-                                                                                                                                                   .-        P..,.'-,.                                                                    ._           -           Cir.nT     -     As-Co* '             wr            .   .      ._       "
4W ,-Wom ol0                              .              _* . :, --                                               1-joI
                                                                                                                                                                                                                   * - .       I
                                                                                                                                                                                                                                * -                       -I--Io,.                                                 ..                   .
i
______             I Ii..oiofl II                                                                                                                              q            ,-               -                                             *    * '-"                        . A* & 8 T           /l - '          $          -
I~'I
                                                                                                                                                                                                                                                                                                                                                   /
    .0,50070 00    810 I 0.471 0047130471 MWCr0V70.00055S&#xa3;001                                SVAWWWAMOM"A.4t                        ~AV.                                                                       .....              ~~~~~~~~~~~
                                                                                                                                                                                             ~! u -I=              .--            -.     *,w      nAf..                                      E232-781
                                                                                                                                                                                                                                                                                                  ,toi                            ,-7      ._;*
g
                                      *     ~ ~          ~~~~                    -          ,
                                                                                                                   . I
                                                                                                                                      .s"I        ---1 .     .
* I..      ..          3...        .     .      .--    '      ..            ..        I.      .       ....                , .        . *=

II a        I-             q 9                                                                                                             2
       ~31 9j6 Lla-
_Fzre cor.n        7r3.
w f-                             /g
                                                                                                                                                                                                                       .3L-0.aD IISC1 aD.      LE~**
                                                                                                                                *4,5'       ~                    CA'J4113ACCA0 K,                                      1-
                                                                                                             '40-4*4.14.17Is 014500. 1451/24 AE0A~...
iOt9SZ14*5 ZIS% 441 PCSA4'I5 1414044*4*IIW*A              C 1.1.3 K
                                                                                           -                   -.                   RI
  -13                                          ___1~~                                                 14                                     14*
4._w 6.1)
                                                                                                -   -                4E5~20           3' sw~I
                                                                                             - 414.4m1 DET            -)
4$A7A4$   A-ElF      77
                                                        .3.
47530.44575
                                                                                                                                                                                   #qlww           335' 3    C .. 30E *4w3/04s5 c0'11Z IQ
                                                     ---                    7777-_
i.
                                                                                                  -               ___     7_
           ~SR7~W4t (L!IM~r.~A*
                                                                                                                                                                                                                                                       ..^.1, i    i ........                                  -                   I AC .4133 34$       3  'eSSeC-,,4-0,14c 11;3534lA3PC 444.4014111               .      I I 04EYlISA',r Ge~fA~4 A~~                    RAr       e                                55...
A01104 IUGINNC 14.145404-51414
                                                                                                                                                                                 ~    ~            ~
31475,4St A401          Z" W&#xfd;0 s =ff.-*~
I--                                            vCSSEL Ofl33&#xb6;        ArbTAC/A4LTS
                                    -  ~40A   aaq14e'0~',sE4                                                                                                              !:                                                       a.-
I i                    I mm 1232-79
                                  -   -             U                          I   5....                               ..                                                   ~I....12 w F&#xfd;A

I                     so S
                                                                   -         Us7 F
F, 45          I IL-                                -         --------
C~A,             . ef-.
                                                         -~~~~~~~     -          * ~ - 5 ~ - ~ -.---         -- ----         ----- --
A'/3Z~~~tn     SCSD.
7--am--     Stfl'C    O
-- ,      I 2/-t-   e*s~~Vof~             g/
     - ,rAo                 U   'sar~ll.       ,in-t, NSA       U      -1.                                      ---- --

4   4       4+        +G 100
             -0  --         S 66A'&"AZ           L~
2TESC~i'~AC ~L~A/801 AW10kfi                &#xfd;   l             1     -     - -      -          2DAXAFlDBWWJVr   L" A- -4"                                  EAz2-a-232-843
                                           .                3 zwmI    I    2    -2 8 4  =    -

R                                           7                                                                                                                                                                              'l                                                         i 7~-z~                                                                                                                                    4
[I i  I   ,I 4.2.7A....S-       --
   --H o**r , eo.,o.# 24#                                                  ___"      I
                                                                                                                                     , :                            002 1-                                                              ,
                                                                                                                                                                     " TA I         .I
                                                                                                                     . 2 03      0 2
(                                                                                                                                                                                                                                                                                                                                                       G
                                                                                                     .   . .....   .   .                                                                                                        S~1102~Gf
                                                                                          .          .             ..                                     "04 -- a                                                            e F                                                                                                                                                                                                                                                                                                                                                       F It.A                                                                             ,,-       I 5LALs.ral.&#xfd;Ld
                                                                                                                                                                                                                                                ~n               ~
0(1.. 'GB4
                                                                                                                                                                                                                                -4i                              -
tJPPO!T sKIRT R d0           TOM I-WBAD     M5
                                  -                   -            -                       -           -               -            -             -                                                                                                                N/
E L.309                     (N                                                                             '                 o r0L,2,.
22o2.212---.                                                                        -       -          ------                                                                                                 (41'5 7
FI                                                 6~-
:-,I     ...............
                          -p                                                   N                                                                        2        L-~
7-.-                                                                                                                               71 AH
                                              -j
                                                                                                                                                                                                                                                                   '5. 0
                                                                                                                                                                                                                                                                                            ~;   .L{~1...                        'Nl~l l A O:E       I5JPOPT    1;:' DIMIN                                                                                                                                                                                                  (.1)4.
                                                                                                                                                                                                                                                 -I                                                      504004 AS 540PM
                                                                                                                                               ..                  -_  - ._ ,-                         .t..                   Ve-w-.
                                                    ,-/233                       M4                                                                    _&#xfd;PBA5PLAT      A5S-r(e    4*.*z*o#zo                               I/N*CTION          CO/LA'ASSr 220?A10 I                                                                                                                                                                                                                                                                                                                                                 jir 5IOIJ  D-D4~sI                                                                 -     ~        SIP          ~       IAm       t                 Al,000
                                                                                                                                                                                                                                                                                     'I   44.470CC1010 O 0905060103 0                 PAAI        Srs SCAlA S 'i-C d-D I                  2A            ""      L      J
                                                                                                                                                     -:_&. i 9'r+      _
S  #   ,        .,
_2]25k SCALE                   AL
                            "   I- L2_                  W p---             -     . . .
                                                                                                                                                                          . _- .       "  __"0- "    5          *
* 0  CAOrT    .i3'r40- '"F::      IT~,/
                                                                                                                                                                                                                                                                                   -    I                                   t A        - .
                                                                                                                                                         =s     -A .*           .d"-
il:;:    *r,!#"8
                                                                                                                                                                                                       -. ,,..o
                                                                                                                                                                                                                  '                                                                        SS.
W IITM                   ,                      1cf U   I
                                         &#xfd;U          T        SLOW I4r1:T" A&F-aLY SCAL.          -O-
                                                                                        ,'NE- AL NorTmO                        CONTPAC.  ..           P-F-. D'                 3   PI      R         ..                -D06'         cWG.           "DWG o---o--oI                    ...
                                                                                                                                                                                                                                                                             '04',                  -"       "1G-A-                                        ~
22iZ
                                                                                                                                                                                                                                                                                                                     . ....VE.SEL iT     .
A5Y AND OGTAiL5
                                                                                                                                                                                                                                                                                                                                               .=*
Sam                                                              123 2- 861i V                                                                                       U

ELEV. 745.25" ELEV. 723.38" SHELL RING 5 ELEV. 589.0" NOTES, I - ALL M.EWS ARE, LOKING AT VESSEL FROM OUTSIDE.
2 - A-SENSOR IDENTIFICATIONS.
rcat         H0sC1IG4 em UKow.
NOT  FRc K9M0. C0tIC"MXM. OR01ME SWM1-Q0A=~Nm LASALLE       COUNTY STATION        1, UNIT      1 INSERVMCE INSPECTION RPV WELD & SENSOR LAYOUT

A am, SHOW 70P HEADO WaDS, CLAD PATCHES, STUO LOCATOL NOZZLES (N7. NO, NIB) AND nlANU TOP HEAD WELD DESIGNATIONS FOR UNIT fl VESSEL
                                                                                       .ME-rnoWi l      tamuitmme.mva-onu.
am     am   I.WM                                                   SALLE         LASAU.E CaTu         STATlON SNow           -                   --                      r---
                                                            "ENGNEERNG                        UNIT  1 I_        _    __   _ _ __
_I__ _MAP
_       ___EMTOP VESSE    HEAD         sGL10A

                                                                                                             -3~.     *1 900L-130-is w
lalli8 BOTTOM VESSEL HEAD WELD DESIGNATIONS FORUt .3                                           m   m   nmmm   m a. w-m in   am   I Now=          mum-                              I     SALLE                          Cmmy1 STATm LASALLE UNIT A_____ _____ _         New_
_________      _  _ISERACE        PISPECTN         IWAI.L WiO.
MA____                BOTTOM  VESSE          9CL10 i~-E-       rA SYSTEM           HEAD ASSEMBLY TE_______________
_____________        _r_   ME     T    I

6*,0-1I-PUMP LOCATION F-9 REF. INSPEClION CHECKLIST     IHP-PU ELEV. 673'                            mT ,m m-   mm~m W     IU 1.mA m %mUS
                                                                   *ma          "m I     NoIhmNEERING              UT
_____         .I!SELICE SISPECTION  _         _No MJAP             HP PUM     ASSEMBLY       ISI-GEL-1049A m           )ST-Mm ,                               ZHT    W    I

0901-130'41I PUMP LOCATION B-14 REF. INSPECTION CHECICUST      LP-PU 1W W   -00   -oomo= a -M vomnm
             -. _____ - iL ____ - SALL                             CouNTYSTATIN  m
__ _NEE__N  ___I___            _    .s NSPEC_                 NG.EN MAP                   LP PUMP ASSEMB.Y          IS1-EL-1050 SYSTEM I                                 I DUT    or

COO L PUMP LOCATION IA       G-14 Is      C-9 iC      1-10 REF. INSPECTION CHECKUSTS IRH-PU-IARH-PU-1I ELEV. 673'                                                RH-PU-IC
                                                        -I m-in         rim x.*
                                                         -i -w ,-il           -l
                                                                           .lnL"l N   wa      1H.
* _-- "&#xfd;       ="            SALLE         LASALLE      CouNY STAI          tON, I          ___]E__             ENGINEERING               UNIT  1
_I_
MAP           R    PUMP ASSEMBY              ISI-GEL-1003 SYSTEM   _____IA

A   B   C   0 NMT      A. .L C. 0 ARE EQUALLY SPACED (W". 90. 1W. 2717 NO1TE LOCA7lON HXIA 0 H A 145 HX1B 0S    & 10 SER*ACE WATER INLET   UEREICE WAlER OUTLET LASAULE COUNlY STAllON INSERIVIE INSPECI1ON IRH-HX1A, 10 RHR HEAT EXCHANGERS

COMMONWEALTH EDISON COMPANY                                                                                       Page 20 of 22 Procedure No. NDT-C-30 Rev.                  2                                                                    December, 1993 ULTRASONIC TESTING DATA SHEET                   NDT-DS-C2A STATION/UNIT:         .ASA(It-       /I-                                                              PAGE:         /      OF PROCEDURE:     NDT                REV.            DATA SHEET NO.:                         /30            DATE:      :-10-fr CALIBRATION SHEET NO.(S)
ST. BEAM:        C-C) _3                  ANGLE BEAM: axial                 C-03        5-       circ.         C_-C7_3_,_     _
COMPONENT INSPECTED SYSTEM:     _        '_                    WELD#:        6EL -I o       -A&           WELD TYPE:           T"      >
PIPE SIZE:        611               THICKNESS/SCHEDULE:                V. 75'             MATERIAL:           0-5 COMPONENT TEMPERATURE:                           -/6V      'F7A   3 SCAN GAIN CONTROL SETTINGS ANGLE BEAM AXIAL:                6 0.8id3 STRAIGHT BEAM: w*                  ./57                                                .f COUPLANT/
BATCH #:       LL.rArtL            3       ot ' 4 Q                         ANGLE BEAM CIRC.:           -e6.2oJ1 EXAMINATION SCANS Performed                    Indications YES       NO      NO                    YES
: 1) Base Metal Straight Beam                                   >
   / \   2)   Angle Beam-Normal-Against                 Flow           >                 ><
: 3)   Angle Beam-Normal-With Flow
: 4)  Angle Beam-Along Weld-CW
: 5) Angle Beam-Along Weld-CCW                                                     ><
L    6)  Straight Beam of Weld                                                       ><
0 W    7)  Thickness Across Weld & Base Metal                                              A//A              P/A           /A UP STRM           WELD          DN STR ADDITIONAL COMMENTS
                                       ~A PJ
                                       'S*             al       R (I-CcT
                                                                    -        S     IQ% - 30% XbRLL PART.AL             COVJ6r.A66-           C) N         ol       SC hv        'tue      1-ro    LP-7 OotoPir L         ATliho iJ.      L-)    _D.srAoj0(           p f    .f       Rva62o                   A&     LQ&Lb
                                  *St-    A tj 't       'IR~f ltCTS               'g*
ACt4WhOt(.
PRV1"vuL       Y'       ReoJ 61           OIL_ Z'J 1> 'CAToor-4          o'956Ryep, -Augwago% 8ecygTAA6L                    LtjvL EXAMINER:                                                            LEVEL:                       DATE:           /     9-REVIEWER:/                                                           LEVEL: JLLL-                 DATE:      Z-/Y*,-
OTHER-:                      6?                                      LEVEL:    ZRT                DATE:______
STATION: c*~.J                    ~DATE:______
ANI I:                  -..                                          DATE:

GE Nuclear Energy Top Head to Flange Weld, GEL-1009- AG. (0&deg; to 1800)
Due to the Flange configuration the following coverage was achieved.
00          450         60      'Exam area 78.5%       97.4%      96.0%      Base Material 78.5%       78.5%     CW, Circ scans 78.5%       78.5%     CCW, Circ scans 100.0%      100.0%      Ax Up 46.6%         26.5%    Ax On 466%          26.5%    Ax Dn 78.5%       80.2%        75.9%    Totals Composite coverage = 78.2% due to the Flange.
Also, 166" of weld was limited to a 'W' of 5.5" due to OD machining. These areas are 32" at weld DM, 97" at weld DQ and 37" at weld DR. This limitation of 166" resulted in an additional 6.3% of the required volume not examined.
Total coverage achieved = 71.9%
Scale: Half REPORT NO.:
96    O DATE SMAD REVIEW *"DATE PAGE -    _ F         _
GE REVIEWED BY         LEVEL  DATE                 UTILITY REVIEW fO&#xfd;  &#xfd;4= %*-&#xfd;..

COMMONWEALTH EDISON COMPANY                                                                                   Page 20 of 22 Procedure No. NDT-C-30 Rev.               2                                                                   December, 1993 ULTRASONIC TESTING DATA SHEET                 NDT-DS-C2A STATION/UNIT:            LAS*1k,5   /i                                              "    *.        PAGE:        /      OF   /
PROCEDURE: NDT- C3O            REV.         _DATA SHEET NO.:                      -        /A 131       DATE:             -TEf CALIBRATION SHEET NO.(S)
ST. BEAM:    -*-/-"-                 ANGLE BEAM:         axial        C-c36                   circ.       f-C3*
COMPONENT INSPECTED SYSTEM:         RV                     WELD 0:        C, (      -A                  WELD TYPE:            -rH PIPE SIZE:          A/16         THICKNESS/SCHEDULE:                     75"            MATERIAL:          CS COMPONENT TEMPERATURE:                    &deg;f     '/!5 9 783 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:             IV                      ANGLE BEAM AXIAL:             ___-_          _.__J_
COUPLANT/
BATCH #:          LuLTIF   C,    C      0 cl '10*C t                   ANGLE BEAM CIRC.:                        0-c EXAMINATION SCANS Performed                       Indications YES          NO      NO                  YES
: 1)  Base Metal Straight Beam                                                 ,V/A VI
    /   \   2)  Angle Beam-Normal-Against              Flow
: 3)  Angle Beam-Normal-With Flow                                                                          A,
: 4)  Angle Beam-Along Weld-CW                                 .,
,           5) Angle Beam-Along Weld-CCW                o-F L     6)  Straight      Beam of Weld                                               M IA/I  _
0 W     7)  Thickness Across Weld & Base Metal                                          A//IA,/
A                          IV/h-UP STRM         WELD           DN STR ADDITIONAL COMMENTS
                                     '-;-  A OA4      d       ?.f 6 IC-TS        Iel % rO~oX                       I-oL PART-#AL          Co\16- A&6         0,.J
* SCA,,      "b      ,     o   FL     ,,pj&6 C 0r,4 C-i...-u kA -r t 0  J,             ~5 T-AN 'j 3D          cc-                           wT~-   L r A&LJL EXAMINER:- ,.0t*            0                                  LEVEL:       _          _       DATE:       ________
REVIEWER:                                                      LEVEL:__________                DATE:_______
OTHER:-                                                        LEVEL:DATE:
STATIONf&#xfd;                   C-.DAE ANI I:__________________                                       DATE:        tS

NDT-B-I Revision 6 December,     1993 Page 43 of 44 FORM NDT-B-l-F1 MAGNETIC PARTICLE EXAMINATION DATA SHEET DATE   2-/0 -76             STATION & UNIT       LaSalleUnitI               DATA SHEET #               1--/3_
EXAMINER    E.           rT      e-,                                        LEVEL     W7 SYSTEM    RPV                                                     coMPoNENT        GEL-1009-AG SECTION XI EDITION & ADDENDA             1989 Edition, No Addenda                CODE CLASS      I SECTION XI CATEGORY         B-A                                           ACCEPTANCE STD.         IWB-3510.3 PROCEDURE # & REVISION           NDT-B-I Rev. 6                  SKETCH SHEET USED: YES                    NO X COMM3ENTS:      Configuration: THD        &#xa3;-X ,fr/u    iJ     c9-/          0'    &-t-L.           L-/OQY-Ag MAGNETIC PARTICLE EXAM:
Manufacturer             Model/Type                      S/N Yoke                         ParKer                  ujuu*           PAA -AC HTv- t             Current AC X DC Particles                   Magnaflux                                    c 3 A 0 145            Color A'ED Black Light                   N/A                    N/A                       NIA B.L.M. Readings              N/A B.L.M. Time Checks              Initial             NIA                    Final              NIA EXAM RESULTS ACCEPT    X                                          REJECT REVIEWED BY:
EXAMINER:    i.                                            LEVEL:                        DATE:   2-ID- ?b REVIEWER:                                                  LEVEL:                        DATE:
OTHER:            .      L                                 LEVEL:   ______               DATE:
33TATION:                      t                                                         DATE:
DATE:
37.0

COMMONWEALTH EDISON COMPANY                                                                                  Page 20 of 22 Procedure No. NDT-C-30 Rev.                        2                                                         December, 1993 ULTRASONIC TESTING DATA SHEET                  NDT-DS-C2A STATION/UNIT:                Ap._*Lt               '/                                              PAGE:        /      OF PROCEDURE:      NDT-        C-30 REV.             Z. DATA SHEET NO.:       _      _-     ___       DATE:        12_-_
CALIBRATION SHEET NO.(S)
ST. BEAM:        (f_-_040                       ANGLE BEAM: axial        C-'1/2/l                circ.       (f_-_/
COMPONENT INSPECTED SYSTEM:     _             /_______WELD                S/ML             /O       ,      WELD TYPE:     7W,,!:>
PIPE SIZE:       _      ____THICKNESS/SCHEDULE:                          4,               MATERIAL:         C COMPONENT TEMPERATURE:                      d.6.1 Po: #.5 -'     77?3 SCAN GAIN CONTROL               SETTINGS STRAIGHT BEAM: :Pc.               A/ 7-.0 /SANGLEBEAM                   AXIAL:             Al -le" COUPLANTI//&#xa3;           *       -    Z COPATBATCH.                                                                 ANGLE BEAM CIRC.:_______
EXAMINATION        SCANS
                                                                         -Performed                   Indications YES         NO    NO               YES
: 1)   Base Metal Straight Beam                                    *
     / \    2)   Angle Beam-Normal-Against                     Flow
: 3)   Angle Beam-Normal-With Flow
: 4)   Angle Beam-Along Weld-CW
.(          5)   Angle Beam-Along Weld-CCW                                  V F
L     6)   Straight Beam of Weld 0
W     7)   Thickness Across Weld & Base Metal                                                         ^11S/4 UP STRM      WELD           DN STR ADDITIONAL COMMENTS EXAMINER: -                                                         LEVEL:                      DATE: _2
__2          -9_
REVIEWER:               *i         4          Z'*                   LEVEL:       _-Z-7          DATE:__________
OTHER:                                                              LEVEL:_____   -      o t-*  DATE:"     /
STATION.&#xfd;&#xfd;                                                          DATE:___________
ANI I:                                                 k~    ~      DATE:      3-~~)-~

GE NuclearEnergy                                                                 Weld # AL-`
Typical for welds, GEL-1009-DM, Data Sheet 96-146 & 147 and GEL-1009-DP Data Sheet 96-150 & 151 Due to the welded lifting lugs an area 6.5" x 24" was I
unavailable for inspection. Thisarea represents 35% of the required examination volume, however some coverage was obtained with the axial scans from the clockwise and counter clockwise side of the weld.
Area of Limitation I24" Composite coverage achieved = 77.2%
due to Welded Lug z
I                6.5"                                                                           /
I I  A1                                            KI   I 6.5"
                                                                           ,*\
WELD 3 I.5" Weld # AG I
REPORT NO.:
GE REVIEWED BY LEVEL    DATE I MI LEVEL~~~
rrv POIn II Tml
* lbWW
_r  ,
DATE
                                                                                        &#xfd;'
SMAD RQEWR EIWDT    40:4
_?/1-y/14 DATE 1USA 96-146 PAGE,2    OF:  2L fi~'Pb.f~  7Y&#xfd;-           L)7g         ,OMU MWRE &

COMMONWEALTH EDISON COMPANY                                                                                                 Page 20 of 22 Procedure No. NDT-C-30 Rev.                     2                                                                           December, 1993 ULTRASONIC TESTING DATA S                     NDT-DS-C2A STATION/UNIT:              /.9sq      zz          //                                                          PAGE:          J      OF PROCEDURE:        NDT-&#xfd;_:30         REV.      2      DATA SHEET NO.:                    I_ //7                    DATE:         .2-/2-74 CALIBRATION SHEET NO.(S)
ST. BEAM:            101_4_                 ANGLE BEAM:   axial      _     -_    _       __z           circ.        _      _____
COMPONENT INSPECTED SYSTEM:     _____                  ___WELD           0:  G~-/O         -/>"                WELD TYPE:           ________
PIPE SIZE:         __/_               THICKNESS/SCHEDULE:               447s"                   MATERIAL:                e COMPONENT TEMPERATURE:                   &     " 'z //15-472   3 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:%/4                                     ANGLE BEAM AXIAL:
* 0 COUPLANT/                                                                               BN            R         ___,______
BATCH 0:          //1                                                      ANGLE BEo      AM       C1C.
EXAMINATION SCANS
                                                                     -'erformed                               Indications YES            NO        NO                         YES
: 1)  Base Metal Straight Beam
  / I\   2)  Angle Beam-Normal-Against Flow                                                         ,
: 3)  Angle Beam-Normal-With Flow                                  -                             __
: 4)  Angle Beam-Along Weld-CW                                                           .7
: 5)  Angle Beam-Along Weld-CCW                                                          .7 F
L    6)  Straight Beam of Weld 0
W     7)  Thickness Across Weld & Base Metal                                       V            g//*                -/         j  '/*
UP STRM               WELD.         DN STR ADDITIONAL COMMENTS i~'    c~4          c/  &s        73        ,,,    ,,r               A       ;.
EXAMINER:         _*           $*1 2i.1         .--               LEVEL:               Z                DATE:__________
REVIEWER:.                                                        LEVEL:-              _77              DATE:             2-2           4 OTHER:                                                            LEVEL:______                          DATE:_11;_________
STATION                        C.                                 DA DATE:     &#xfd;       //o ANTI:                                                             DATE:        3

COMMONWEALTH EDISON COMPANY                                                                               Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                            December, 1993 ULTRASONIC TESTING DATA SHEET              NDT-DS-C2A STATION/UNIT:          /3        '     c        //PAGE:                                                     /     OF      PROCEDURE: NDT-C-          3 REV. Z     DATA SHEET NO.:       fe-/,C)                   DATE: .2 -/2-9 CALIBRATION SHEET NO.(S)
ST. BEAM:      C-0          0            ANGLE BEAM:    axial       C-O"//                 circ. _-_      __/          _
COMPONENT INSPECTED SYSTEM:      _    _            _     _WELD       #:        -/O'7-        )        ELD TYPE:
W'E-                7__ -,'D PIPE SIZE:           A,/4 -         THICKNESS/SCHEDULE:                        "      MATERIAL:     _
COMPONENT TEMPERATURE:                      04 #
                                            "-       XT-477-"3 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                    7. i'          ANGLE BEAM AXIAL:
* Ia.      4   c/(
COUPLANT/                                                         1 BATCH 0:        117AW          eI                    &#xfd;                 ANGLE BEAM CIRC.:'A EXAMINATION        SCANS                                          "Pe romed                     Indications YES         NO      NO                  YES
: 1) Base Metal Straight Beam
  /I \    2)   Angle Beam-Normal-Against              Flow                             /
: 3)   Angle Beam-Normal-With Flow                                            /
: 4)   Angle Beam-Along Weld-CW
: 5)   Angle Beam-Along Weld-CCW                           V F
0 L     6)   Straight Beam of Weld                               b.,
W      7)   Thickness Across Weld & Base Metal                                        ///9-   f    )/#           ,//4 UP STRM        WELD          DN STR ADDITIONAL COMMENTS EX              A     M      I    NER:Re'I.                   LEVEL:_                        DATE:____/2_              _*_
REVIEWER:                                                      EL                             AE OTHER:                                                        LEVEL:                         DATE:    ~-/7 STATIO 10    i             (.                                 DATE: ?___________
ANII:            (~4j'V~"DATE:

S
                                                                                             .- w                   ___     .
GE Nuclear Energy Typical for welds, GEL-1009-DM, Data Sheet 96-146 & 147 Weld # AL"'
10" t
and GEL-1009-DP Data Sheet 96-150 & 151 Due to the welded lifting lugs an area 6.5" x 24" was unavailable for Inspection. This-area represents 35% of             !'
the required examination volume, however some coverage was obtained with the axial scans from the 24 clockwise and counter clockwise side of the weld.
Area of Limitation Composite coverage achieved = 77.2%                                         due to Welded Lug 6.5" 34.5" Weld # AG m                      -
REPORT NO.:
GE REVIEWED BY       LEVEL    DATE czZ~          z'4~:
UTILITY REVIEW   DATE                     SMAD REVIEW        DATE PAGE: 2 S96.15a (oF 2
                                                                                          '4 qlL                  &#xfd;K 0  -&#xfd; _'-_( 0       r~Mt.* -  -*

COMMONWEALTH EDISON COMPANY                                                                             Page 20 of 22 Procedure No. NDT-C-30 Rev. 2                                                                           December, 1993 I           I        I ULTRASONIC TESTING DATA SHEET           NDT-DS-C2A STATION/UNIT:          / 4 Y4/          -                                                   PAGE:      _          OF    /
PROCEDURE: NDT-e-30          REV. 2-     DATA SHEET NO.:              1 /5-' 5            DATE:           .2-/Z-9tC CALIBRATION SHEET NO. (8)
ST. SEAM:  __          _   _       ANGLE BEAM: axial      _        -_____              circ. __________-
COMPONENT INSPECTED SYSTEM:           PRPI               WELD 0:                       L) 1*-)/?7-WELD      TYPE:      7 PIPE SIZE:         A/_/_. THICKNESS/SCHEDULE7                 .1      "6
                                                                           '        MATERIAL:         C5 COMPONENT TEMPERATURE:            .4 0Fr     .C    /4     .3 SCAN GAIN CONTROL SETTINGS STRAIGHT SEAM:               44'ANGLE                      B3EAM AXIAL:           d3. L)
COUPLANT/,
BATCH #:'.~-
                                            ~ANGLE I              BEAM CIRC.:         ~        .'d EXANINALTION      SCANS                                     EOPerfozrme Indications YES        NO        NO                  YES
: 1)  Base Metal Straight Beam
   / I\   2)  Angle Beam-Normal-Against Flow                    .
: 3)  Angle Beam-Normal-With Flow
: 4) Angle Beam-Along Weld-CW
: 5)  Angle Beam-Along Weld-CCW F
L 0W    6) Straight Beam of Weld
: 7) Thickness Across Weld & Base Metal                         a            A//*a-   I  #//*
UP STRM       WELD              DN STR ADDITIONAL COMMENTS EXAMINER:                                                LEVEL:          7               DATE:              1-/2-94.
REVIEWER:                                                LEVEL:         -777-            DATE:                -i-/     .
OTHER:       74      ~      6  L       d      (LEVEL:                           Z        DATE:_____
STATIOq!.                 6                              DATE:
ANII:                                            -       DATE:      3-          9.

COMMONWEALTH EDISON COMPANY                                                                               Page 20 of 22 Procedure No. NDT-C-30 Rev.            2                                                                  December, 1993 ULTRASONIC TESTING DATA SHEET             NDT-DS-C2A STATION/UNIT:         !ASA/iE       /1                                                     PAGE:              /      OF PROCEDURE: NDT-Cq              REV. 2     DATA SHEET NO.:      _         -    _     _        DATE:           2- Z/- %
CALIBRATION SHEET NO.(S)
ST. BEAM:       (  -Q 73            ANGLE BEAM:   axial    __       -_______           circ. __-______/
COMPONENT INSPECTED SYSTEM:    -A   tPV                 WELD #-: LCS--'4f"                       WELD TYPE:FANrr                    o*$E55"r4.
r,0 PIPE SIZE:        N.IA          THICKNESS/SCHEDULE:       -7.          ..        MATERIAL:        CS COMPONENT TEMPERATURE:          8'  f    i  .15fOO7 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:        , f_2.aWW8              ANGLE BEAM AXIAL:            ir  5-7. y COUPLANTT                                                  -] ANGLE BEAM CIRC.: ."                     ,/ O'R EXAMINATION SCANS Performed                       Indications YES            NO    NO                   YES
: 1) Base Metal Straight Beam                           V                 V
   /I\   2)  Angle Beam-Normal-Against          Flow           v                    v
: 3)  Angle Beam-Normal-With Flow                       -4                                N
: 4)  Angle Beam-Along Weld-CW                                                            X4
: 5)  Angle Beam-Along Weld-CCW                         v/
L    6)  Straight     Beam of Weld                                             v                     ....
0 W    7) Thickness Across Weld & Base Metal                                    v/1AV/A                         I/A UP STRM          WELD               DN STR ADDITIONAL COMMENTS
                         'i-7CAAI    Wei      "'FLFC7= JOt                          A144P
                                                                                                                            '.4)
No       ELtrAM       PER.ef*7R      *:,                "       7c"4
                                                                         - 0..       /Off*-      Z,/0' 009 To EME                          -LEVEL:
* DATE:      2 L.2 REVIEWER:                                               LEVEL:                           DATE:                4    -,94 OTHERLEVEL:                                                                              DATE:_                 _      _
LANII:
STATION:
               -h 6.
                             .z DATE:____________
DATE:

GE NuclearEnergy Vessel to Flange Weld, GEL-1009-AF. Exam performed for 360&deg; Due to the Flange configuration the following coverage was achieved.
0&deg;      450        600     Exam area 54.5% 75.0%          65.4%   Base Material 54.5%       54.5%   CW Circ. scans 54.5%       54.5%   CCW Circ. scans 100.0% 100I0%        Ax Down o1no/.      0f1n. Av fin
                                            .5% 56.8%       U!9%     Total        Composite coverage = 55.4%
                                                                                                                                   /
INz I                                                               Scale: Half REPORT NO.:
WWz&---
GE REVIEWED BY
                   -zzz:- J-27--d)4 LEVEL   DATE                  UTILITY REVIEW           DATE                SVM REVIEW        DATE    PAGE:-- 2 OF: 2 GE~~~~~~~
DAT                           REiE             LEE ~16             SMAD&#xfd;Rr
                                                                                           ,EIEE             kBY    ,TLT  AE           aEIWDT

COMMONWEALTH EDISON COMPANY                                                                               Page 20 of 22 Procedure No. NDT-C-30 Rev.                  2                                                            December, 1993 ULTRASONIC TESTING DATA sHET               NDT-DS-C2A STATION/UNIT:           LAAI5  I....   /A                                                     PAGE:            /    OF PROCEDURE: NDT- fQ                REV.            DATA SHEET NO.:       19_-_.2_"__l              DATE:          11-9a CALIBRATION SHEET NO.(S)
ST. BEAM:             A/I                ANGLE BEAM: axial            C)     ?5           circ.            -c7-COMPONENT INSPECTED SYSTEM:         9PV                       WELD 0:    L-CS---AF                   WELD TYPE:     _      __e-_      _    /
PIPE SIZE:          AKIA            THICKNESS/SCHEDULE:         7                   MATERIAL:         CS COMPONENT TEMPERATURE:               )          0  15 5007 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              IV/A                  ANGLE BEAM AXIAL:                 7 -i COUPLANT/
BOPANTCH0    _tL1RAGrft-tI2' * "A'         3.2 ,s                    ANGLE BEAM CIRC.:         ~
EXAMINATION SCAMS Performed                   Indications YES         NO    NO                YES
: 1) Base Metal Straight Beam.'                                               //
       \    2)  Angle Beam-Normal-Against               Flow
: 3)  Angle Beam-Normal-With Flow                                               A/       /a
: 4) Angle Beam-Along Weld-CW                                                                      AA
(    F      5)  Angle Beam-Along Weld-CCW                                               V L     6)   Straight      Beam of Weld                            -              NIA 0
W     7)   Thickness Across Weld & Base Metal                                       A1/1A         g//           A//A UP STRM         WELD          ON STR ADDITIONAL COMMENTS
                                        *5CAF4             R6FL6CYS_          /06~
A)t       6XAM'         26& ORM67\d              fO 6, r0:         AT-c            io5     '         t~
L .A&           LcP,    "r--1      3,      F3Ro,-"         LT-      T-oe, EXAMINER:                                                     LEVEL: .. LLL-             DATE:          2/4 REVIEWER:-                                                    LEVEL: -B-                   DATE:    .? 7 OTHER:                                                        LEVEL:     -. Z,.            DATE:__        _____
STATION:         IDATE:                                                         2i ANII:    +,._..,;_-._,/                                  __DATE:       -'+i*"7

COMMONWEALTH EDISON COMPANY                                                                                                             Page 20 of 22 Procedure No. NDT-C-30                       Rev. 2                                                                                     December, 199 ULTRASONIC TESTING DATA SHEET                             NDT-DS-C2A STATION/UNIT:             L-ASALL_- /I                                                                                        PAGE:              OF PROCEDURE:           NDT-    C_-._7,      REV.        .       DATA SHEET NO.:               96-/5a                               DATE:
CALIBRATION SHEET NO.(S)
ST. BEAM:      _       _-_                         ANGLE      BEAM:  axial                      W4 q         _        circ.         C-      L414 COMPONENT INSPECTED SYSTEM:               ARR                          WELD o: LCS-I- MIR                                     WELD TYPE:                 A-'Sh PIPE SIZE:              Aq"                THICKNESS/SCHEDULE:                  4,.J""MATERIAL:                                        (LS COMPONENT TEMPERATURE:                                  :80 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                          ,t)td*                     ANGLE BEAM AXIAL:                         (3,0)4B COUPLANT/
BATCH         :      ULTPA           EL    L.-/91wa,.                                   ANGLE BEAM CIRC.:                             .45od EXAMINATION SCANS                                                                    Performed                                Indications YES               NO      NO                       YES
: 1)     Base Metal         Straight           Beam                                    _..._  --
   /    \ 2) Angle Beam-Normal-Against Flow                                                                     -
: 3)     Angle Beam-Normal-With Flow
: 4)     Angle Beam-Along Weld-CW
                                                                                                               .7'      ____
: 5)     Angle Beam-Along Weld-CCW FL     6)     Straight Beam of Weld 0
W      7)     Thickness       Across Weld              & Base Metal                           /               '/A                              /
UP STRM             WELD           DN STR ADDITIONAL COMMENTS
      ?Ea P-CM,4/"       E-1J) 4_:XAW*-                      2   0         S A/ta e-XAM          PtcUPOMEIJ&#xfd; OW\ )4O2Z-Lf -SIl(e oF:                       IA.39L6LLbU                 7TC,    )4Xf           Cc43PL(Ak1-zoM.
AU                       &#xfd;-    A'     /ao                75-~ .2
                                                                 ?   W P,~,.                            7&#xfd;  1                      2IeW A,le     7~
EXAMINER:               ,LEVEL:                                                                                          DATE:               --
REVIEWER:                                                                     LEVEL:               /                     DATE:____________
OTHER:                                                                        LEVEL:
* DATE:     _3_________
             'STATION:             6DATE                                                :_
ANII:                                                                         DATE

GE NuclearEnergy Typical for Welds LCS-1-NiA, Data Sheets 96-152 & 153 and LCS-1-NIB, Data Sheets 96-154 & 155.
Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
0&deg; = 56.25%
450 = 60.75%
60&deg; = 58.81%
Coverage due to nozzle = 58.6%
Weld LCS-1-NIA was also limited at 180&deg; due to a 3.25" thermocouple located 2.5" from weld toe. This results In an additional .66% coverage not achieved.
Total composite coverage for LCS-1-NIA = 57.94%
N                                I REPORT NO.:
                                                                                                                       -9U    GE REVIEWED BY       LEVEL    DATE                 UTILITY REVIEWDATE               SMAD REVIEW             DATE PAGE:--  OF 2 A , I #-   '-- I I- - " -*I'-' " - --

COMMONWEALTH EDISON COMPANY                                                                                               Page 20 of 22 Procedure No.           NDT-C-30            Rev. 2                                                                     December, 1993 ULTRASONIC TESTING DATA SHEET                       NDT-DS-C2A STATION/UNIT:            Zf 1,91-t    Lt/                                                                    PAGE:          (      OF    /
PROCEDURE:         NDT-                 REV. 7-          DATA SHEET NO.:                       - /53            DATE:         2-/*
CALIBRATION SHEET NO.(S)
ST. BEAM:    _        _/_       _             ANGLE    BEAM:   axial              C-
* circ. _       -___        _-
COMPONENT INSPECTED SYSTEM:          114                            WELD #: ICS-/-                A/IA           WELD TYPE:         N-S PIPE SIZE:           2'l     1            THICKNESS/SCHEDULE:                 e.q5"                MATERIAL:       C 5 COMPONENT TEMPERATURE:                             I SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                AAANGLE                                  BEAM AXIAL:
BATCH 0:
COUPLANT/                   -L7/    ItM        -r5325-                              ANGLE BEAM CIRC.,         .C/o           d EXAMINATION SCANS Performed                     Indications YES       NO        NO                 YES
: 1)   Base Metal Straight Beam                                                  V1
   / J\    2)  Angle Beam-Normal-Against                     Flow                         V
: 3)  Angle Beam-Normal-With                    Flow                     7
: 4)  Angle Beam-Along Weld-CW                                           V/        ,             _
: 5)  Angle Beam-Along Weld-CCW                                          V                  V F
L     6)  Straight Beam of Weld                                                      V 0
W     7)  Thickness Across Weld & Base Metal                                                      AI        IV A               AI A UP STRM         WELD           DN STR ADDITIONAL COMMENTS A/D 15                       0105,     0 VA/   #VOZZ.AL15,)     45~~~
0U    (4je  t           'V'    &07L4       Covla yaoi,'
  'vc'   e-6~9N ,06JFo?r-?zQV9          .OE     7Tb     3.25     *Pip~rL'A          -rV&A   ~co(A ipcs        /Ocqrs&'        z. 5'
   )rkyAo"    NJO         roc          Air-     go"'
EXAMINER:                        ca_        l            -LEVEL:                        .        ~        DATE:_______
REVIEWER:            Waec                                               LEVEL:-~                          DATE:      2-7         5e OHR                  DLEVEL:                                                             DATE:      /2~':;    Ayr-STATION                        6DATE:______
ANII:                                                                   DATE:.j3c

COMMONWEALTH EDISON COMPANY                                                                             Page 20 of 22 Procedure No. NDT-C-30           Rev. 2                                                             December, 199*
ULTRASONIC TESTING DATA SHEET              NDT-DS-C2A STATION/UNIT:         4A 5QLLL       1                                                     PAGE:               OF  _
PROCEDURE:     NDT-           REV. c_*    DATA SHEET NO.:           96-)541                DATE:       &#xfd;-jS-j CALIBRATION SHEET NO.(S)
ST. BEAM:        c__q3              ANGLE BEAM:       axial                           circ.       C-0q4 COMPONENT INSPECTED SYSTEM:     __                       WELD     #:    LCS-1-AItA                 WELD TYPE:       ,/-S PIPE SIZE:        2jj          THICKNESS/SCHEDULE:             *,IS'              MATERIAL:
COMPONENT TEMPERATURE:         ___           sq_
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:      _           . _           ANGLE BEAM AXIAL:        _        (o______dis COUPLANT/
BATCH #:        L.TZAG&e---. :.2/       9.53a5                     ANGLE BEAM CIRC.:         _    _,____
EXAMINATION      SCANS                                          Performed                  Indications YES        NO     NO                 YES
: 1) Base Metal Straight Beam
   / \    2)  Angle Beam-Normal-Against             Flow                     /
: 3)  Angle Beam-Normal-With Flow                                          VA
: 4)  Angle Beam-Along Weld-CW F
: 5)  Angle Beam-Along Weld-CCW                                            7                         _
L     6)  Straight Beam of Weld                                     ___
W     7)  Thickness Across Weld & Base Metal                                    As/A          Ad/eq           /
UP STRM       WELD          DN STR]
ADDITIONAL COMMENTS
    ?P-EoLpEt         E4PtYrM  WadT      0 0 L I g4SOS NO1   fj~o    PP~eFo(4flit) OM A102-2--&             510t   OP Ucfk1iS DLLI, TO         PJOZZLE       Co(.)F16LkATi M.
EXAMI14ER: 2*LEVEL:______                                                                DATE:_______
REVIEWER:___                                                 LEVEL:_                     DATE:
OTHER:                                                       LEVEL:                      DATE:__
S T ATIO0N:A                                                 DATE:_______
ANII:                                                        DATE:

GE Nuclear Energy Typical for Welds LCS-1-N1A, Data Sheets 96-152 & 153 and LCS-1-NIB, Data Sheets 96-154 & 155.
Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
0 = 56.25%
450 = 60.75%
600 = 58.81%
Total composite coverage = 58.6%
k
                                                                                                               /
REPORT NO.:
i 54-LEVEL   DATE Y4,                                      I GE REVIEWED BY                                    UTILTY REVIEW ;&#xfd;/eE-          SMAD REVIEW DATE PAGE:--2    OF ANL,

COMMONWEALTH EDISON COMPANY                                                                                   Page 20 of 22 Procedure No. NDT-C-30 Rev.                2                                                                 December, 199.
ULTRASONIC TESTING DATA SHEET                  NDT-DS-C2A STATION/UNIT:        4A     I.PLLAS  /(L4ilT-                                                      PAGE:                  OF PROCEDURE: NDT-                 REV. a      DATA SHEET NO.:                                      DATE:      76-/155
_-/_"____
CALIBRATION SHEET NO.(S)
ST. BEAM:      tv/A/                    ANGLE BEAM:     axial    _-______circ.                          (-0145 COMPONENT INSPECTED SYSTEM:     IM                          WELD 0:      LC5-    I-AiIf                   WELD TYPE:     A/-_               _    _
PIPE SIZE:       2               THICKNESS/SCHEDULE:            S'/5                      MATERIAL:      (l COMPONENT TEMPERATURE:             75&deg;            /
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                AiA                       ANGLE BEAM AXIAL:             6-5    J'4 couPLANT/
BATCH 0:                     TT5_*7_                                AN ANGLE       BEAM CIRC.:         5 ,1bJ EXAMINATION SCANS, Performed                        Indications YES             NO      NO                YES
: 1) Base Metal Straight             Beam                      --
: 2)  Angle Beam-Normal-Against               Flow                          V/
: 3)  Angle Beam-Normal-With              Flow                              -        w
: 4)  Angle Beam-Along Weld-CW                               V                      v
: 5)  Angle Beam-Along Weld-CCW                               '7                     V F
L    6)  Straight Beam of Weld                                                '7 0W    7)  Thickness Across Weld & Base Metal                                    V/
UP STRM      WELD             DN STR ADDITIONAL COMMENTS NO 60rt-l*    P*E~j41H    C1-2RopJ      A*'?ZL*r      S)DE    or--      w,-1-9         VVtE  7"0 A.1O*ZCLC          C,.*e#C-EXAMINER:                             _LEVEL:___                                   ________DATE:        Z/5/7 REVIEWER:                         ,LEVEL                             ,               , ,,       DATE:
OTHER:-                                                       LEVEL:       7Z?"                 DATE:_          ____
STATION                   KDATE:_______
ANI I:   C   )jlS1-\DATE:                                                    Z

COMMONWEALTH EDISON COMPANY                                                                            Page 20 of 22 Procedure No. NDT-C-30 Rev.            2                                                               December, 1993 ULTRASONIC TESTING DATA SHEET            NDT-DS-C2A STATION/UNIT:         LASALL         /1                                                      PAGE:          I      OF PROCEDURE:     NDT-           REV. _      DATA SHEET NO.:       _    _16d --                   DATE:     _-__-__
CALIBRATION SHEET NO.(S)
ST. BEAM:       C2-o*C,            ANGLE BEAM:    axial            - 051                 circ.       C--051 COMPONENT     INSPECTED SYSTEM:            /WS               ELD   i: LCS -I- A3A                     WELD TYPE:              /iS PIPE SIZE:          .2(o       THICKNESS/SCHEDULE:             .                   MATERIAL:           CS COMPONENT TEMPERATURE:                *I0* qa1 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:           Soqds                ANGLE BEAM AXIAL:                      5.
COUPLANT/
BATCH #:      ULTUAGEL            9x53as                       ANGLE BEAM CIRC.                    _      _       __
EXAMINATION      SCANS                                   -
Performed                        Indications YES            NO     NO                 YES 1 ) Base Metal Straight Beam
   / \   2)  Angle Beam-Normal-Against         Flow                                  -
: 3)  Angle Beam-Normal-With Flow
: 4)  Angle Beam-Along Weld-CW`                                             V     __
: 5)  Angle Beam-Along Weld-CCW L    6)  Straight Beam of Weld W    7) Thickness Across Weld & Base Metal                           V/           -V/      A                    'VIA UP STRM        WELD             DN STR ADDITIONAL COMMENTS 1M&SIcuS4-)                    J     MDLSLL Ab .
rw             i    GIM          -4LOU&J
                                                                         "        ,.      pC.c*.cRLF.          /..      -LS..
  )4o OZZI&#x17d;LE~ SIM~ blP W1ELLS                fci-yupjIKt         bu          To       NC&#x17d;zzLL     C~ICbA.'-GLp'Tier.-
EXAMINER:_*          _____LEVEL:                                    ____                  DATE:-      2-3-96 REVIEWER:__                                              LEVEL:                _          DATE:    /I       .
oLHER:-'7-"                                                EVEL:
* DATE:______
STATION:        ____                                     DATE:     9 -Ye. -
ANII:     *~'--~,DATE:_____

SGE            NuclearEnergy Typical for Welds: LCS-1-N3A, Data Sheets 96-162 & 163 LCS-1-N3B, Data Sheets 96-164 & 165 LCS-1-N3C, Data Sheets 96-166 & 167 LCS-1-N3D, Data Sheets 96-168 & 169 Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
             .0&deg;= 57.85%
450 = 61.60%
600 = 60.40%
Total composite coverage = 59.95%
                                                                                                     /
REPORT NO.:
1;
                                                   &#xfd;-, / , e--)-
UTILITY REVIEW DATE             DATE PAGE: 2    OF:     2 GE REVIEWED BY       LEVEL    DATE                                     SMAD REVIEW
                                                                            -.    ~              FORMUT,02REV.8

COMMONWEALTH EDISON COMPANY                                                                               Page 20 of 22 Procedure No. UDT-C-30 Rev. 2                                                                             December, 1993 ULTRASONIC TESTING DATA SKE                 NDT-DS-C2A STATION/UNIT:      I^ L4LL//                                                                    PAGE:          I OF   /
PROCEDURE: NDT- C-3_b           REV. -Z       DATA SHEET NO.:                -/.3  e              DATE:       2___/_-  _
CALIBRATION SHEET NO.(S)
ST. BEA*:   A/l                        ANGLE DEAM: axial           C      0,--               circ. _      -0_-._. _
COMPONENT INSPECTED SYSTEM:    MS                          WELD#:    LCS-f- A3A                   WELD TYPE:          N5 PIPE SIZE:       2                THICKNESS/SCHEDULE:         7.0"                  MATERIAL:        C-5 COMPONENT TEMPERATURE:            YqI     /Lj2 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              IVA4                  ANGLE BEAM AXIAL:
COUPLANT//
BATCH #:   (* LrA"     L zr        _f,'                       j ANGLE BEAM CIRC.:
EXAMINATION SCANS Perforued                          Indications YES          NO        NO                  YES
: 1) Base Metal Straight Beam                                        V
  / \   2)  Angle Beam-Normal-Against Flow
: 3)  Angle Beam-Normal-With Flow                                              .,
: 4) Angle Beam-Along Weld-CW                           -__"_,/
F
: 5)  Angle Beam-Along Weld-CCW                           V                    V       _
L    6)  Straight Beam of Weld                                                           _-
0 W    7)  Thickness Across Weld & Base Metal                                          A.,       I    V,          ?VA UP STRM         WELD         DN STR ADDITIONAL COMMENTS A4?IsOvgrVeDx     EXM          Airi     60'S 1V0 A/Q5ZZ((5    Sjbo            f o.Ae'-b     ~'j              u606 -10 A1-07Z(6'              eCo11(4v1,24r~
EXAMINER:             '                                   LEVEL:                   :         DATE:    "      ;-
REVIEWER:                                                 LEVEL:        z=.-                 DATE:       -1 ?
OTHER:                    5)     J     #4tLEVEL:                       ________              DATE:    .3104 AF STAT ION:                                                 DATE:         9,4/
ANII:   **>             ----------                        DATE:    -z-   -' f

COMMONWEALTH EDISON COMPANY                                                                                        Page 20 of 22 Procedure No. NDT-C-30 Rev.                        2                                                               December, 1993 ULTRASONIC TESTING DATA SHEET               NDT-DS-C2A STATION/UNIT:                   L-RSALLU.-            1 I                                                PAGE:       J        OF PROCEDURE:          NDT-        C.-3. REV. _        DATA SHEET NO.:         96- /6!]                    DATE:      .--      9, CALIBRATION SHEET NO.(S)
ST. BEAM:            C-__SO                  ANGLE BEAM:    axial         C.-CSJ                 circ.        C-CS COMPONENT INSPECTED SYSTEM:               MS                      WELD #:       LCS Ml?                   WELD TYPE:            AJS PIPE SIZE:           __(Ito              THICKNESS/SCHEDULE:             '.0"               MATERIAL:              C  S COMPONENT TEMPERATURE:                     M40      *154 JI SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                                        ANGLE BEAM AXIAL:            _           _o COUPLANT/
BATCH 1:            JLTRAC               XL-17,       5                     ANGLE BEAM CIRC.:                   50 EXAMINATION SCANS Performed                      Indications YES         NO      NO                  YES
: 1) Base Metal Straight Beam                                                       V
       \   2)   Angle Beam-Normal-Against                   Flow                              -
: 3)   Angle Beam-Normal-With Flow                               /    */
: 4)   Angle Beam-Along Weld-CW                                    V/
F*     5)   Angle Beam-Along Weld-CCW                                   V/
L       6)   Straight           Beam of Weld Ow    7) Thickness Across Weld & Base Metal                                    /V./1       ^/1                           A/
UP STRH          WELD          DN STR ADDITIONAL          COMMENTS WIZVEMED                  &#xa3;X~Arw, 1Airr1A   O'L    4L Im'DcSJ~TIaj              Cl0a1EI&#xfd;Q     JAI M10 WAPLL Rtericpi           M- C-Qu-3     i         OpQALf.. L90eULLS.
A/fJAJO22.ta -Si                   OF: LI~m.       FLr~m_       b~f     -Th 1.Jc2ZLL               oF&..T EXAMINER:            .        ,LEVEL:                                          -                     DATE:_______
REVIEWER:                                                            LEVEL:                     j    DATE:       4,2 - /9   "
OTHER:                              e                                LEVEL:                          DATE:      ./3-4        '/'
STATION:                                          -;                 DATE:_         ___
ANII:         -                        -                             DATE:

oGE          NuclearEnergy Typical for Welds: LCS-1-N3A, Data Sheets 96-162 & 163 LCS-I-N3B, Data Sheets 96-164 & 165 LCS-1-N3C, Data Sheets 96-166 & 167 LCS-1-N3D, Data Sheets 96-168 & 169 Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
00 = 57.85%
450 = 61.60%
60&deg; = 60.40%
Total composite coverage = 59.95%
K REPORT NO.:
IXz GE REVIEWED BY ee 22w?
LEVEL Ae 2.2Y DATE                ,UTILITY REVIEW     DATE               EVIEWDATE SMAD      PAGE: 2 OF: 2 UliLITY~~OR REVIE SMDRVIWDT                REV.

COMMONWEALTH EDISON COMPANY                                                                                                 Page 20 of 22 Procedure No. NDT-C-30 Rev.                    2                                                                            December, 1993 ULTRASONIC TESTING DATA SKEET                     NDT-DS-C2A STATION/UNIT: Li              SItltl/-                                                                            PAGE:        (   OF /
PROCEDURE: NDT-             -__o      REV. 2-       DATA SHEET NO.:                   9_i'_        __/6             DATE:     2-/3-7 CALIBRATION SHEET NO.(S)
ST. BEAM:       A/k                         ANGLE BEAM:         axial        Cf-0-2                         circ. _     __f  -     _
COMPONENT INSPECTED SYSTEM:      M      S                       WELD     0:  LC 5-       I-bA36                      WELD TYPE:         A)
PIPE SIZE:            26               THICKNESS/SCHEDULE:                  T0                        MATERIAL:        CS COMPONENT TEMPERATURE:                  yq9     IS/yZ)
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:             At'4                           ANGLE BEAM AXIAL:                           (*3     I BATCH 0:       iii     jr/bd(.         ZL     T5 z5                             ANGLE BEAM CIRC.:
EXAMINATION SCANS Performed                             Indications YES            NO         NO                   YES
: 1) Base Metal Straight Beam
   / \   2)   Angle Beam-Normal-Against                   Flow
: 3)   Angle Beam-Normal-With Flow
: 4)   Angle Beam-Along Weld-CW                                        /
: 5) Angle Beam-Along Weld-CCW                                         V1                       V/
F L    6)   Straight Beam of Weld                                                         V 0
W    7)   Thickness Across Weld & Base Metal UP STRM           WELD       DN STR ADDITIONAL COMMENTS INDIC%*TIOS              08        gfVEp   IN
                                              /V      fID L41LL           AKf-q4              8t%
RFCorV1%15Le               Lc-%JC-LS Afo Ao1zLz5"S1"6, of p,*,e"..                        5A"1,,jeA              bug'           -m      yozzC.          Co,v"1j"u1      ,o,1.
EXAMINER:                                                               LEVEL:_                    _          DATE:        2" 3-qc(,
REVIEWER:                                                               LEVEL:          .                     DATE: ______-______
OTHER:/            Z/-%7          &'                                    LEVEL:_                    _          DATE:      310*/*i6'6 STATION:
* DATE:        c/?i ANII:       -                         ===-                              DATE:    -.-            '

COMMONWEALTH EDISON COMPANY                                                                        Page 20 of 22 Procedure No. NDT-C-30 Rev.             2                                                         December, 1993 ULTRASONIC TESTING DATA SHEET           NDT-DS-C2A STATION/UNIT:             L1SALU           J1                                            PAGE:     1     OF PROCEDURE:     NDT-     C-__  REV. _.      DATA SHEET NO.:      q6_16- /DATE:                      -1 /q-96 CALIBRATION SHEET NO.(S)
ST. BEAM:        C-     OS3          ANGLE BEAM:     axial       Cd0514               circ. C-os(
COMPONENT INSPECTED SYSTEM:            /)7s               WELD #:     L*S-I-A      C            WELD TYPE:           )S PIPE SIZE:          _26         THICKNESS/SCHEDULE:          7.0 I             MATERIAL:           CS COMPONENT TEMPERATURE:           9qF-1qqA SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              6p.                ANGLE BEAM AXIAL:                56. S COUPLANT/                                                         AC                     .:       5 9-0 BATCH #:       (JLTiZAGELP_,        S3_                         ANGLE BEAM CIRC.:               59,o EXAMINATION SCANS Performed                    Indications YES        NO     NO                YES Y          N         O
: 1)   Base Metal Straight Beam
   / \   2)  Angle Beam-Normal-Against            Flow                           -
: 3)  Angle Beam-Normal-With Flow
: 4)  Angle Beam-Along Weld-CW
: 5)  Angle Beam-Along         Weld-CCW                                  V/1 F
L    6)  Straight Beam of Weld                             V.,
0 W    7)  Thickness Across Weld & Base Metal                         /          .VA/      I A'/      I   /I UP STRM        WELD       DN STR ADDITIONAL COMMENTS OMoEE           EXAM~I   W3TRk LL      4  4' A10'A101zL&      SIDE 6FLaELC OF    ftyXM       LMOLF   TO      oA1Q-7Lq_      CaGfIE-%~AL-rtQ0-'~
EXAMINER:                                                 LEVEL: -                      DATE:________
OTHER:                                                    LEVEL:..                      DATE:
OTE:A)LEVEL:                                                            DATE:_     _____
STATION                --                                 DATE: ______/____
ANII:       =::          "                                DATE:     &#xfd;&#xfd;- ! -1 (

SGE            Nuclear Energy Typical for Welds: LCS-1-N3A, Data Sheets 96-162 & 163 LCS-1-N3B, Data Sheets 96-164 & 165, LCS-1-N3C, Data Sheets 96-166 & 167 LCS-1-N3D, Data Sheets 96-168 & 169 Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
00 = 57.85%
450 = 61.60%
600 = 60.40%
Total composite coverage = 59.95%
REPORT NO.:
DATE                  PAGE: 2    OF:     2 GE REVIEWED BY       LEVEL    DATE                UTILIY REVIEW      SMAD REVIEW DATE FORMUTrYR1v,

COMMONWEALTH EDISON COMPANY                                                                       Page 20 of 22 Procedure No. NDT-C-30 Rev. 2                                                                     December, 1993 ULTRASONIC TESTING DATA SHEET1            DT-DS-C2A STATION/UNIT: L N LyLLE             J                                                   PAGE:        /   OF  /
PROCEDURE: NDT-C-30_           REV. 2. DATA SHEET NO.:    __     -_/     _7       DATE:        1 2-/&#xa5;"  C.
CALIBRATION SHEET NO.(S)
ST. BEAM:    A,                      ANGLE BEAM: axial          C      0-,         circ.      C-  -
COMPONENT INSPECTED SYSTEM:      P1 5                     WELD #:     LCS"-
bAl/3 C              WELD TYPE:     NS PIPE SIZE:     _____,           THICKNESS/SCHEDULE:           7.0"            MATERIAL:      C5 COMPONENT TEMPERATURE:            *c     l     wS*21 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:t                                  ANGLE BEAM AXIAL:                     C/X BATCH N:       i)rA 4 Q 6-5*                  2-
                                            ;7_                   ANGLE BEAM CIRC.:,4 EXAMINATION SCANS Performed                 Indications YES       No    no                YES
: 1) Base Metal Straight Beam
   / \   2)  Angle Beam-Normal-Against             Flow
: 3)  Angle Beam-Normal-With Flow                                       Ve
: 4)  Angle Beam-Along Weld-CW                                          V,
: 5)  Angle Beam-Along Weld-CCW                                         V L    6)  Straight Beam of Weld W    7)  Thickness Across Weld & Base Metal                          V/                 ilN% k.       r' UP STEM      WELD         DN STR ADDITIONAL COMMENTS
         )c 4 ds epA-A,             t XA-kW         %4(       *s
  ,goG*7-rJ0F4S       COX&~VEJD   IA' M1D PALL.       Veql*PiJ   f3etta.. MECOMDASLLI         E V!-L S A/C mtoz~zLC jit)6          ooc' Wee-          d~4?A6          buc5   -ro A/ozzcC  r    ~     -C~e4-1~
EXAMINER:                                                  LEVEL:.                   DATE:  *2-* *-
REVIEWER:                                                  LEVEL:____         __     DATE: .2.-'-
OTHER:                       c2 &#xfd;4                         LEVEL:     7?DATE:                  /6' STATION:     2                                             DATE:
ANII:        ---
iL.      ,-*                                DATE:

COMMONWEALTH EDISON COMPANY                                                                              Page 20 of 22 Procedure No.       NDT-C-30       Rev. 2                                                                December, 1993 ULTRASONIC TESTING DATA SHEET               NDT-DS-C2A STATION/UNIT:              LAS-- A      .      ) 2.                                            PAGE:      J      OF PROCEDURE:      NDT-            REV.             DATA SHEET    NO.:       C1__-/6S        _       DATE:    _     _lq_____
CALIBRATION SHEET NO.(S)
ST. BEAM:         C- oS3                ANGLE BEAM: axial            C- S'-               circ.      C..- 06 COMPONENT INSPECTED SYSTEM:          MS                       WELD #:      LCS - I- '     .90         WELD TYPE:           AS M
PIPE SIZE:               '       THICKNESS/SCHEDULE:                1O   "            MATERIAL:          CS COMPONENT TEMPERATURE:            po *LS6            J SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                     .g                ANGLE BEAM AXIAL:              56.
COUPLANT/
BATCH    #:   ULTRA&.&t       7r(         S13[-Jf                     ANGLE BEAM CIRC.:               6 EXAMINATION SCANS Performed                   Indications YES         NO     NO               YES
: 1) Base Metal Straight Beam
   / \    2)  Angle Beam-Normal-Against               Flow
: 3)  Angle Beam-Normal-With              Flow
: 4)  Angle Beam-Along Weld-CW
: 5)  Angle Beam-Along Weld-CCW                            .        _
L     6)  Straight Beam of Weld                                                  _
0 W     7)  Thickness Across Weld & Base Metal                                        A/                       A7 AL*/
UP STRM       WELD        DN STR ADDITIONAL COMMENTS
    ?F* oL*hf-      f--A        %z*      66L     t, 4S6_
jAIbICATIGAMS    n&tcjP~f,0t      1.1    Mej    LA.AL-L 9fC.-o.        "Bo.E..   '&#xfd;EC   btA&_L     LAe cLtfS.
  )A40                             ")E2L2O      F y_&P 141j&#xfd;  Q.LLO1-6 Mc5ZZL~                 cNft~
EXAMINER:                                                      L, LEVEL:           1r_          DATE:       Z--91 REVIEWER:                   ..                                 LEVEL:____                    DATE: _     _
OTE:LEVEL:                                                                   DATE:_______
STATIO(&#xfd;:&#xfd;
                      &#xfd;DATE:.
ANI I:                     --                                  DATE:

S          GE Nuclear Energy Typical for Welds: LCS-1-N3A, Data Sheets 96-162 & 163 LCS-I-N36, Data Sheets 96-164 & 165 LCS-1-N3C, Data Sheets 96-166 & 167 LCS-1-N3D, Data Sheets 96-168 & 169 Due to the configuration of the nozzle no exams were performed from the nozzle side. This limits the coverage achieved to:
0&deg; = 57.85%
450 = 61.60%
600 = 60A0%
Total composite coverage = 59.95%
N REPORT NO.:
                                                                     <-&#xfd;Xe/&#xfd; d                        2 OF: 2 GE REVIEWED BY       LEVEL    DATE                UTILITY REVIEW   DATE    SMAD REVIEW DATE PAGE:
DATE UllUlY REVIEW

COMMONWEALTH EDISON COMPANY                                                                                        Page 20 of 22 Procedure No.        NDT-C-30        Rev.      2                                                                   December, 1993 ULTRASONIC TESTING DATA SHEET                        N=-DS-C2A STATION/UNIT:              A-ASA/F 1         /    Z                                                      PAGE:                 OF PROCEDURE: NDT-          _         EV.              DATA SHEET         O./                                 DATE:      ____-      __
CALIBRATION SHEET NO.(S)
ST. SEAM:       IVA                          ANGLE BEAM: axial               C-     0  &#xa3;-J           circ.       C--O*-Z-COMPONENT INSPECTED SYSTEM:      _ A7]                        WELD #:          -C5-f-AJ-3D                   WELD TYPE:            A/ S PIPE SIZE:         :2              THICKNESS/SCHEDULE:                  7. 0                  MATERIAL:          C 5 COMPONENT TEMPERATURE:-             *                ./   I SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                   ZA4                        ANGLE BEAM AXIAL:
COUPLANT/
B3ATCH 0:    (LP/.L                                                          ANGLE BEAM CIRC.:           _______
EXAMINATION SCANS Performed                    Indications YES        NO       NO                  YES
: 1) Base Metal Straight Beam
  / \   2)   Angle Beam-Normal-Against                    Flow
: 3)   Angle Beam-Normal-With Flow                                >                    '
: 4)   Angle Beam-Along Weld-CW                                   ><
: 5)   Angle Beam-Along Weld-CCW F
L    6)   Straight Beam of Weld 0
W    7) Thickness Across Weld & Base Metal                                                  A/AIA1A                       Al/A UP STRM         WELD          DN STR ADDITIONAL COMMENTS PFLd'r-21yr,          eXANi         W~r          60*4    s
  //glc~rjof4&                                  IN)f M   ArB WALL.         A'ee~ror4        OffL   v fic-bvfVLE              LI-iVff-L.
Alo   AI~7?L~           ~     ~     t~~C    L~iQL1l    ~TtAii   IA/Ic~JA     A b~     -Th    A(Oz7/6        C~Aljc~a U2AT~av.
A10   A1e07_7Zj5       _"&#xfd;jA15      eioc tueg-b        151,4-&#xfd;IA1157.6       bQ9      -m     ovo r-e-e Cootlz-16vg4nqw&#xfd; EXAMINER:                                                            LEVEL:         -.Z'7            DATE:     Z-/L-      71-REVIEWER:                                                            LEVEL:"
D9T       *-                    DATE:           7 OTER_LEVEL:
                         ;&#xfd;                                                                          DATE:
STATION:6&#xfd;&#xfd;            &#xfd;..-E                                         DATE:.
ANII:      .~Q-2              --        -                            DATE:        -

ComEd                                                                                                           Page 19 of 20 Procedure No.         NDT-C-2       Rev. 22                                                                 September, 199 ULTRASONIC TESTING DATA SHE                   NDT-DS-C2A STATION/UNIT:           L-If//e          1/2                                                        PAGE :           /      OF    2-P PROCEDURE: NUT- C-2.               REV. 5~DATA          S EET NO.:       ____2___                    DATE:          -?        4 CALIBRATION SHEET NO. (S)                                                     2       0 ST. BEAM:     __/_/_         _             ANGLE  BEAM: axial     ___-_______                 circ. __-______
COMPONENT INSPECT SYSTEM:          #//l'                     WELD #t:/,/-A'i-_                          WELD TYPE:       /           -- ,*,z1/
PIPE SIZE:          R-"             THICKNESS/SCHEDULE:             ],/                   MATERIAL:     C-5 COMPONENT TEMPERATURE:               l4ao.L                 ;'-J*                                                                   I SCAN GAIN CONTROL SETZINGS STRAIGHT BEAMt         _        _//                 ANGLE BEAM AXIAL:                   -,o.      dL COUPLANT/
BATCH #:           l7e-,VA       _     - /     9J-p                     ANGLE BEAM CIRC.:                 o..        d EZAMINATION SCAkNS                                              --
I Performed Indications YES            NO     NO                 YES
: 1)    Base Metal Straight Beam
   / \   2) Angle Beam-Normal-Against Flow
: 3)   Angle Beam-Normal-With Flow
: 4)   Angle Beam-Along Weld-CW s)   Angle Beam-Along Weld-CCW L    6)   Straight Beam of Weld W    7) Thickness Across Weld & Base Metal                                             ,/.          .-      "          *//
UP STRM     WELD               DN STR ADDITIONAL COMMENTS EXAMINER:                                                       LEVEL:                         DATE:    ;7--17-9a REVIEWER:                                                       LEVEL:--,        _-I?-i'-      DATE:
OTHER:                                                          LEVEL:               ~DATE:
.STATION    __6DATE:                                                           47f ANII:                    ----                                   DATE:       S1

WALL THICKNESS               SITE:    LaSalle Unit I                         REPORT NO.-
GE NuclearEnergy                      PROFILE SHEET              PROJECT:  LIR07                                  '2 2 SYSTEM:          #13                        COMPONENT ID q //Ie  -. i
: 0. 90`   180"  270'                                                j<     Is-. 1                      1.5    ->  1 POSITION CROWN HEIGHT:Ee-'A             'II                       2              4                [ii 2                                      CROWN WIDTH:____r-__________.____
                         /                 NOM DIAMETER-       '
4         _E                             LD                                                       -  _
WELD LENGTH:___________                                    FLOW RH-HXIB-1
: 1. Due to the configuration of the nozzle, no axial exams were performed on the base material of the nozzle.
: 2. Due to the cladding on the ID two direction coverage from one side is not possible.
Because of these two limiting factors, 80% coverage of the code required volume was achieved.          ,;__
LEV-  . A-TE DRAWN BY         LEVEL    DATE GE REVIEWED BY        LEVEL     DATE

NDT-D-2 Revision      10 October,      1994 FORM NDT-D-2-FI Page 47 of 48 LIQUID PENETRANT EXAMINATION DATA SHEET DATE:           -                 STATION & UNIT:                  LaSalle Unit I                  DATA SHEET #       ('6  -Oi3*5 EXAMINER:                            V6A           .A6               ~LEVEL:                                    2Z SYSTEM:                           1-4/fC 5                                            MATERIAL:        (5 COMPONENT:
SECTION XI EDITION & ADDENDA:                      1989 Edition, No Addenda                      CODE CLASS:    _      _     _     _
SECTION XI CATEGORY:                             C    -  6                            ACCEPTANCE STD.:       /1    /C "-55/f5 PROCEDURE # & REVISION:                  NDT-D-2 Rev. 10                              SKETCH SHEET USED: YES ___           NO COMMENTS:         Configuration:                 )            440,-4-_" -
                                                             ,_                            ,              /7-0
   ,(A      e*tK9,M1A1,0/r/
4r                                                  -~- 70?9            ~      Z'T        9Z*   7     /u52?J*/
LIQUID PENETRANT EXAM:
MATERIAL:
MATERIAL MANUFACTURE:                 Magnaflux TYPE                         BATCH PRE-EXAM CLEANER:                      SKC-S                       *        -       "      DRYING                              MINUTES PENETRANT:                             SKL-SP                               0  y e         PENETRATION                         MINUTES PENETRANT CLEANER:                     SKC-S                     I/-.)      5              DRYING
                                                                                                               /O 5            MINUTES DEVELOPER:                             SKD-S2                                              DEVELOPING                         MINUTES POST EXAM CLEANER:                     SKC-S SURFACE TEMPERATURE:      .E          " &deg;       /ffq/9 _3
* LIGHT SOURCE:
EXAMINATION RESULTS:
ACCEPT                                                REJECT           ltll'4
                                                                                                 /
REVIEWED BY:
EXAMINER:-_       _   _  _  _    _   _  _ __    _   _  _ _   _    _   _  _
LEVEL:               DATE:
REVIEWER:_______________                                         ____          LEVEL:               DATE:
OTHER:     &#xfd;-/6?'42.'z                    4~ i                                 LEVEL:               DATE:
STATION:        *~::.-6ih                                                                           DATE:
ANI I:             *%      -L--N                                                                    DATE:

Revision 10 October, 1994 W
UDT-D-2-V2     Page 48 of 48 STLH sS=lUSHEET FOR  IUITD P       MT       Dm             'T
(                                                                        WnTASETo_
(XH 9(o,__              STATION A MIT: L    -&     (  VAJlr 5,.'
                        -,,A)              C Pu1-- e-                    LMM CMC' CEME-r           ~c) 'b7 ~2     3oOp~5~T5
                                                                                   'p22,.,77      v*"'m   ,,<
7*;7-//5 .'e,,'*;7"  /' .2V:
S   1//
a'(A &d     *      *_x _
                                                             *3t#
ci=&WA6 TO Eyirq1Ikf Ak&EA~                         S1&wA-) Oui 7-0 LJ1C/< 6'F --                        A PI/YI5/C&#xfd;P9          //ccE65s bPOf          W161-,- P'PETh         5d/DCOLIts in/c1 9-r 6                 6011' c~/,'00e    g/ 0 776 LZM6         29 IUC67- /PAO9kY4i C
BY:
PEVIEWEDi7
        *.                    <:        K     rzv*/**a-                j   DAT.:_______
ANII

EXAMINATION 

==SUMMARY==
SHEET                                            Repor No.:
GE NUCLEAR ENERGY                                           LaSalle Unit I LIR08                                         ".01 11.0083.2                LCS-1-N6A                            N-SH                   GEL-1109                  RPV                 B-D ID Number:               Component ID:                    Configuration:                 Drawing:              System:         ASME Cat.:
Examination       Cert          Exam                 Exams          Data       Cal                Procedum               Calibration Personnel        Level       Completed           Performed        Sheet      Sheet                Revision                Block CE Frakes                !I        11/04/99                0           D-147      D-147          UT-DRD-300V3 R.0             01-91-03 45S          D-148      D-148          Ut-DRD-300V3 R.0             01-91-03 60S          D-149      D-149          UT-DRD-300V3 R.0             01-91-03 Examination Results:
Ultrasonic examinations were performed using a combination of 0%45&deg; and 60' shear wave search units.
No examination performed from the nozzle side due to configuration.
No recordable indications were detected.
69.5% coverage of the required ASME Section Xl volume was achieved.
(
Examination results were compared to data report        D673,675,677  from       L IR03      outage with   X     No Change These examinations were performedunder Work Order.                                                          N/A    Change This Summary and the following data sheets have been reviewed and accepted by the followingpersonnel:           RWP:        1107
                                                        -/.4                                                              Dose:      t00      mr.
Revi       By-                    Level:      Date:        Station Reviewed By:

==Title:==
Date:
777R       ,ae7 A N R , 0weB:                            it               atPg                       f Reviewed By:                      Level:      Date:        ANII R wed By:

==Title:==
Date:          Page    1 of      9

LaSalle Unit I N6 Nozzle Examination coverage obtained      no limitations.
CROSS SECTIONAL AREA (per slice)                                        TOTAL CODE COVERAGE code cross              area                   area          % of code area % of code area  degrees         degrees              percent       percent sectional            scanned                scanned             scanned       scanned      scanned         scanned             scanned        scanned area              automated               manually           automated     manually     automated        manually           automated       manually 0&deg; wm                                62.4                  0.0                   32.3                 0.0          51.8          0.0           360.0                  0.0          51.8 45' T-scan                           62.4                  0.0                   51.2                 0.0          82.1         0.0             360.0                 0.0          82.1 60" T-scan                           62,4                  0.0                   54.6                 0.0          87.5         0.0             360.0                 0.0          87.5 45' P-scan   CW                      62.4                  0.0                   40.1                 0.0          64.3          0.0           360.0                  0.0          64.3 45" P-scan   CW                      62.4                  0.0                   40.1                 0.0          64.3          0.0            360.0                 0.0          64.3 60' P-scan   CW                      62.4                  0.0                   42.6                 0.0          68.3         0.0             360.0                 0.0          68.3 60' P-scan   CCW                     62.4                  0.0                   42.6                 0.0          68.3         0.0            360.0                  0.0          68,3 0.0          69.5 Manual scans were not restricted.
No credit taken for initial 1/4" of material in Code coverage calculations due to near field effects.                                                 Total Composite Coverage -  69.5%
                              *. ??,o'A 2/1-         r,22

Lasalle 1 LPCI 45&deg; and 60" T-scan exammination coverage 0" L-wave scan coverage 60*T 60'
    ?~  e24)-
A~2~   i/!PA   7 401&#xfd; 91
: e. -g e&#xfd;
                                                            ,PO&#xfd;

Lasalle 1 LPCI 45  and 60 P-scan examination coverage
   /     ,,:,<.,-2 6~           1 19i/7L-       ,-
/ 44i2 /A
        ~        -
7j     14 2 Z/ b2  4

IQ&Report                                                   EXAMINATION 

==SUMMARY==
SHEET                                                     No.:
GE NUCLEAR ENERGY                                        LaSalle Unit I LI R08 11.0085.2                LCS-1-N6C                           N-SH                      GEL-1109                    RPV                B-D ID Number:              Component ID:                    Configuration:                  Drawing:                System:         ASME Cat.:
Examination       Cert         Exam                Exams          Data         Cal                  Procedure             Calibration Personnel        Level      Completed           Performed        Sheet        Sheet                Revision                Block CE Frakes                l        11/04/99                0           D-150        D-150         LUT-DRD-300V3 R.0             01-91-03 45S          D-151        D-151           rlT-DRD-300V3 R.0           01-91-03 60S          D-152        D-152         UT-DRD-300V3 R.0              01-91-03 Examination Results:
Ultrasonic examinations were performed using a combination of 0', 45" and 60&deg; shear wave search units.
No examination performed from the nozzle side due to configuration.
No recordable indications were detected.
69.5% coverage of the required ASME Section XI volume was achieved.
(
Examinationresults were compared to data report -     D674,676,678     from       L 1R03      outage with    X    No Change These examinations were performed under Work Order:                                                          N/A    Change This Summary and the following data sheets have been reviewed and accepted by the following personnel            RWP:         1107 Dose:       100   mr.
Rev wedB%                        Level:        &#xfd;e:
Da         Station Reviewed By:

==Title:==
Date:
Reviewed By:                     Level:       Date:      ANII R6(ewed By:

==Title:==
Date:        Page     1    of  9 Reiee B:Lee:                     ae         NI   ~we        y                 ile           Dte           ag           o/

LaSalle Unit I N6 Nozle Examination coverage obtained no limitations, CROSS SECTIONAL AREA (per slice)                                         TOTAL CODE COVERAGE code cross              area                area             % of code area % of code area  degrees          degrees             percent       percent sectional            scanned             scanned                scanned       scanned      scanned          scanned            scanned        scanned area              automated            manually              automated      manually    automated         manually          automated       manually 0&deg; wm                                 62.4                 0.0                32.3                    0.0           51.8        0.0             360.0                 0.0          51.8 45' T-scan                           62.4                  0.0                51.2                    0.0          82.1         0.0             360.0                 0.0          82.1 60* T-scan                            62.4                 0.0                54.6                    0.0          87.5         0.0   -         360.0                 0.0          87.5 45' P-scan   CW                       62.4                 0.0                40.1                    0.0          64.3          0.0             360.0                0.0          64.3 45" P-scan   CW                      62.4                  0.0                40.1                    0.0          64.3         0.0             360.0                 0.0          64.3 60" P-scan   CW                      62.4                  0.0                42.6                    0.0          66.3         0.0             360.0                 0.0          68.3 60" P-scan   CCW                     62.4                  0.0                42.6                    0.0          68.3         0.0             360.0                 0.0          68.3 0.0           69.5 Manual scans were not restricted.
No credit taken for initial 1/4" of material in Code coverage calculations due to near field effects.                                                 Total Composite Coverage =  69.5%
                   # ??.o 4EPR                 0
                                      .-        1      ,    -'-
                                                     ---       ,,/
~6A~
or)

Lasalle 1 LPCI 450 and 60" T-scan exammination coverage 0* L-wave scan coverage l ,
64- , -/5,    - S2.
r

Lasalle 1 LPCI 45' and 60" P-scan examination coverage 60"1
     ?~ o/~
-# O-/S~5, ~-~'5J    , 6 -/5L
  ~         1/4 /~?
   ~           ~
Pci;;r 2 z, -

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                                  1R9-016 GE NUCLEAR ENERGY Site and Unit:                    LaSalle                             Component ID:                              LCS-1-N10 Outage:                LI R09                                                                          N-SH System:       RPV       ASME Cat.:          B-D      ASME Item              B3.90             Aug Requirements:                 N/A Exams Performed      Data Sheet         Cal Sheet           Procedure          Calibration Block        Examination     C      Level       Date I                                           7Personnel 600 Shear          RPV-036              N/A         UT-EXLN-300 V4              01-91-03          3 Paul Anderson      I1           01/17/2002 0&deg; Long.        R, RPV-037              N/A         UT-EXLN-300 V4              01-91-03            Paul Anderson      1II          01/17/2002 At
;,,i45 Shear          "  RPV-035              N/A         UT-EXLN-300 V4              01-91-03            Paul Anderson         II        01t17/2002 Examination Results:
Manual 0O weld and base metal, 450/600 S transverse and parallel scans were performed on the N10 Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section Xl 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 72.4%
Examinaton results were compared to data report      D-680, 682, 684 from             R03       outage with    []    No Change These examinations were performed under Work Order:             99270105                                       D      Change p
2_..),..                               RWP:          N/A This Summary and the following data sheets have been reviewed and accepte&#xfd;     ,yt     e folowing personnel:
rJ             _ti/"1*  -                                                 ,0              Dose:       N/A      mr.
Prepared By:                   Level:         Date:     Utility Reviewed By

==Title:==
Date:
Reviewed By    /               Level:         Date:     ANII Reviewed By:

==Title:==
Date:          Page     1    of

LaSalle Unit1 CRD (NIO NOZZLE)
Jan-02 CODE CROSS-SECTIONAL AREA                                 TOTAL CODE COVERAGE P
                   .0 Area Scanned              % of Area Scanned   Degrees Scanned               % Scanned 0
0             2 Area Inch       Auto          Manual         Auto        Manual Auto        Manual        Auto         Manual 00 WELD METAL     N    60.51          0.0           32.6           0.0          53.9  0.0          360.0        0.0           53.9 45' T-SCAN   N    60.51          0.0           49.4           0.0          81.7  0.0          360.0        0.0           81.7 45' T-SCAN NIA    60.51          0.0            0.0           0.0           0.0  0.0           0.0         0.0            0.0 450 T-SCAN N/A    60.51          0.0            0.0           0.0           0.0  0.0           0.0         0.0            0.0 600 T-SCAN   N    60.51          0.0           52.1           0.0          86.1  0.0          360.0        0.0           86.1 60&deg; T-SCAN N/A    60.51          0.0            0.0           0.0           0.0  0.0           0.0         0.0            0.0 60' T-SCAN N/A    60.51          0.0            0.0           0.0           0.0  0.0           0.0         0.0            0.0 450 P-SCAN CW    N     60.51          0.0           47.7           0.0          78.9  0.0          360.0        0.0           78.9 600 P-SCAN CW    N     60.51          0.0           50.7           0.0          83.8  0.0          360.0        0.0          83.8 450 P-SCAN CCW     N     60.51          0.0           47;7           0.0          78.9  0.0          360.0        0.0          78.9 600 P-SCAN CCW      N    60.51          0.0           26.2           0.0          43.3  0.0          360.0        0.0          43.3 Coverages      0.0          72.4 Total Composite Coverage =     72.4 COMMENTS:
Manual UT scans were limited due to the OD blend radius.
CovCalc.xis 10/6/00

LaSalle 1 CRD (N10) 11N Codia Required 00 450 and 600 T-Scan Exam Volume - 60.51 Sq. In.
0T Exam Volume - 32.61 Sq. In.
456 T-Scan Exam Volume - 49.42 Sq. In.
600 T-Scan Exam Volume - 52.07 Sq. In.
100 600 03
                                                                        --o 0

LaSalle 1 CRD (N10)
Code Required 450 and 600 P-Scan Exam Volume - 60.51 Sq. In.
45 0 F'-Scan Exam Volume - 47.72 Sq. In.
60 0 F'-Scan Exam Volume - 50.72 Sq. In.
450 0

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                                1R9-017 GE NUCLEAR ENERGY Site and Unit:                     LaSalle                          Component D:                             LCS-1-N2B Outage:                 L1R09                                                                       N-SH System:       RPV        ASME Cat.:         B-D     ASME Item            B3. 90            Aug Requirements:                 N/A Exams Performed      Data Sheet         Cal Sheet         Procedure          Calibration Block       Examination      Certl Exm                    PoPersonnel 60
* Shear         RPV-012              N/A          UT-EXLN-300 yq           01-91-03           Charles Barrett        II      01/15/2002 0- Long.         RPV-004              N/A          UT-EXLN-300 V4           01-91-03            Todd Ginder           II      01/15/2002
         .ea45She,     ''RPV-008                N/A          UT-EXLN-300 V/q          01-91-03           Edward Mazyck          II      01/15/2002 Examination Results:
Manual 00 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2B Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 360' around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section XI 1989 Edition, no Addenda,
,,    Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 70.9%
Examination results were comparedto data report    D-117,126,136 from            Li R04      outage with     rv    No Change These examinations were performed under Work Order:           99270105                                       ED    Change This Summary and the following data sheets have been reviewed and acce ted by thyfollowing personnel:             R
   /
   *                    .  ;L~-*     A                                       /Dose:                                                    N/A     mr.
repared By:                   Level:         Date:   Utility Reviewed By:

==Title:==
ate:
Reviewed By:                    Level:         Date:   ANII Reviewed By:

==Title:==
Date:            Page   1    of

LaSalle Unit1 N2B Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                  TOTAL CODE COVERAGE V
Area Scanned               % of Area Scanned   Degrees Scanned                % Scanned 2
Area Inch       Auto          Manual          Auto        Manual Auto        Manual         Auto         Manual 00 WELD METAL    N     76.82          0.0           41.1            0.0          53.4  0.0          360.0        0.0            53.4 450 T-SCAN N      76.82          0.0           63.1            0.0          82.2  0.0          360.0         0.0           82.2 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0             0.0 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0             0.0 600 T-SCAN N      76.82          0.0           66.1            0.0          86.1  0.0          360.0        0.0            86.1 600 T-SCAN N/A    76.82          0.0            0.0            0.0          0.0   0.0           0.0         0.0            0.0 600 T-SCAN N/A    76.82          0.0            0.0            0.0          0.0   0.0           0.0         0.0            0.0 450 P-SCAN CW    N     76.82          0.0           51.1            0.0          66.5  0.0          360.0        0.0            66.5 600 P-SCAN CW    N     76.82          0.0           54.5            0.0          70.9  0.0          360.0        0.0            70.9 45' P-SCAN CCW           76.82 N                    0.0           51.1            0.0          66.5  0.0          360.0        0.0           66.5 600 P-SCAN CCW     N     76.82          0.0           54'5            0.0          70.9  0.0          360.0        0.0            70.9 Coverages      0.0           70.9 Total Composite Coverage =      70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
CovCalc.xls 10/6/00

LaSalle 1 Recirculation Inlet (N2) 00 L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage

LaSalle 1 Recirculation Inlet (N2) 450 and 600 P-Scan examination coverage I
NJ
-N

Report No.:
GE NUCLEAR ENERG Y EXAMINATION 

==SUMMARY==
SHEET                                              1R9-018
!     Site and Unit:                     LaSalle                          Component ID:                            LCS-1 -N2C Outage:                 LI R09                                                                     N-SH System:      RPV          ASME Cat.:        B-D      ASME Item             B3. 90           Aug Requirements:              N/A Exams Performed        Data Sheet        Cal Sheet          Procedure          Calibration Block      Examination     Cert Level      Date7 Personnel 60
* Shear          RPV-013             N/A          UT-EXLN-300 Vy            01-91-03          Charles Barrett      II       01/15/2002 0&deg; Long.          RPV-005 .           N/A          UT-EXLN-300 V             01-91-03           Todd Ginder         II       01/15/2002
  " '&#xfd;- 46P Shear-      ''  RPV-009             N/A          UT-EXLN-300 -t&,          01-91-03          Edward Mazyck        II      01/15/2002 Examination Results:
Manual 00 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2C Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
(     Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section Xl 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 70.9%
Examination results were compared to data report   D-118,127,137 from             LIR04     outage with     []   No Change These examinations were performed under Work Order:            99270105                                      D    Change This Summary and the following data sheets have been revi  7 wed and accept     by     following personnel:
                                                                      /(5)~   /~f                             Z~.-         Dose:      N/A     mr, Prepared By:                    Level:        Date:    Utility Reviewed By:    /

==Title:==
Date:
Reviewed By:                    Level:        Date:    ANII Reviewed By:

==Title:==
Date:          Page     1 of     7

LaSalle Uniti N2C Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                  TOTAL CODE COVERAGE
                   *0 U
Area Scanned               % of Area Scanned   Degrees Scanned              % Scanned
                   .0 2
Area Inch       Auto          Manual          Auto         Manual Auto       Manual        Auto        Manual O0 WELD METAL     N    76.82          0.0           41.1            0.0          53.4  0.0         360.0        0.0          53.4 450 T-SCAN   N    76.82          0.0           63.1            0.0          82.2  0.0         360.0        0.0          82.2 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0          0.0         0.0           0.0 45' T-SCAN NIA    76.82          0.0            0.0            0.0           0.0  0.0          0.0         0.0           0.0 600 T-SCAN   N    76.82          0.0           66.1            0.0          86.1  0.0         360.0        0.0          86.1 600 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0          0.0         0.0           0.0 600 T-SCAN N/A    76.82          0.0            0.0            0.0          0.0   0.0          0.0         0.0           0.0 450 P-SCAN CW    N     76.82          0.0           51.1            0.0          66.5  0.0         360.0        0.0          66.5 60' P-SCAN CW    N     76.82          0.0           54.5            0.0          70.9  0.0         360.0        0.0          70.9 450 P-SCAN CCW      N    76.82          0.0           51.1            0.0          66.5  0.0         360.0        0.0          66.5 60' P-SCAN CCW     N     76.82          0.0           54.5            0.0          70.9  0.0         360.0        0.0          70.9 Coverages     0.0          70.9 Total Composite Coverage =     70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
0/6/0 Cov~al~xls CovCalc.xls 10/6/00

LaSalle 1 Recirculation Inlet (N2) 450 and 600 P-Scan examination coverage
     /
-'I' N

LaSalle 1 Recirculation Inlet (N2) 0&deg; L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage I
C,

I                    Report No.:
GE NUCLEAR ENERGY                                EXAMINATION 

==SUMMARY==
SHEET                                            1R9-019 Site and Unit.                       LaSalle                        Component ID:                          L&#xfd;CS-1-N2D
(
Outage:                LI R09 System:                 ASME Cat:           B-D      ASME Item            B3. 90           Aug Requirements:             N/A Exams Performed      Data Sheet         Cal Sheet          Procedure         Calibration Block      Examinatibn    Cert Level      Date Personnel SLong.         RPV-017              N/A         UT-EXLN-300 V4            01-91-03        Hermann ct            0          /15/20 450 Shear         RPV-01 8             N/A         UT-EXLN-300 V4            01-91-03         Hermann Schlortt     III      01/15/2002 6    shear         RPV-019              N/A         UT-EXLN-300 V4            01-91-03        Hermann Sclhlortt     III     0111512002 Examination Results:
Manual 00 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2D Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section XI 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternative Method).
Previous examination results were reviewed, no change.
Manual Composite Coverage = 70.9%
Examinationresults were compared to data report     D-119, 128,138 from          L1R04     outage with    r]   No Change These examinationswere performed under Work Order:             99270105                                          Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:         RWP:        N/A
___..._         _     Z   *Dose:                                                                N/A     mr.
Prepared By:                    Level:        Date:    Utility Reviewed By:

==Title:==
Date:
Reviewed By:                    Level:        Date:    ANII Reviewed By:

==Title:==
Date:          Page    1' of     7

LaSalle Unit1 N2D Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                  TOTAL CODE COVERAGE Area Scanned                % of Area Scanned   Degrees Scanned               % Scanned 0   Area Inch 2     Auto          Manual          Auto        Manual Auto         Manual       Auto         Manual 00 WELD METAL    N     76.82          0.0           41.1            0.0          53.4  0.0          360.0        0.0           53.4 450 T-SCAN  N 76.82          0.0           63.1            0.0          82.2  0.0          360.0        0.0           82.2 450 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0           0.0 45&deg; T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0           0.0 600 T-SCAN  N     76.82          0.0           66.1            0.0          86.1  0.0          360.0        0.0           86.1 600 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0           0.0 60' T-SCAN N/A    76.82          0.0            0.0            0.0           0.0  0.0           0.0         0.0           0.0 450 P-SCAN CW    N 76.82          0.0           51.1            0.0          66.5  0.0          360.0        0.0          66.5 600 P-SCAN CW    N     76.82          0.0           54.5           0.0           70.9  0.0          360.0        0.0           70.9 450 P-SCAN CCW     N 76.82          0.0           51.1            0.0          66.5  0.0          360.0        0.0          66.5 60' P-SCAN CCW     N     76.82          0.0           54.5            0.0          70.9  0.0          360.0        0.0           70.9 Coveragesi    0.0      1    70.9 Total Composite Coverage =      70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
CovCalc.xls 10/6/00

LaSalle 1 Recirculation Inlet (N2) 00 L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage
    \/
w 00O
                            -o
-TI
                                                 -C

LaSalle 1 Recirculation Inlet (N2) 450 and 600 P-Scan examination coverage
                                           -o NA 2~i

Report No.:
GE NUCLEAR ENERGY EXAMINATION 

==SUMMARY==
SHEET                                            IR9-020
(    Site and Unit:                     LaSalle                         Component ID:                          LCS-1 -N2E Outage:                 LI R09                                                                   N-SH System:                  ASME Cat.:         B-D     ASME Item           B3. 90           Aug Requirements:             N/A Exams Performed         Data Sheet        Cal Sheet          Procedure        Calibration Block      Examination   Cert Level       Date Lo      g.IPersonnel 00 og            RPV-01 4             N/A        UT-EXLN-300 V4            01-91-03           Chad Olson        11       01/115/2002 450 Shear         RPV-015              N/A        UT-EXLN-300 V4            01-91-03           Chad Olson        II       01/15/2002
   -  *:6OShear
* RPV*016              N/A        UT-EXLN-300 V4            01-91-03           Chad Olson        II       01/15/2002 Examination Results:
Manual 0' weld and base metal, 450/600 S transverse and parallel scans were performed on the N2E Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section Xl 1989 Edition, no Addenda, K    Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternative Method).
Previous examination results were reviewed, no change.
Manual Composite Coverage = 70.9%
Examination results were comparedto data report    D-120,129,139 from           LiR04     outage with    E   No Change These examinations were performed under Work Order:          99270105                                    B    Change This Summary and the following data sheets have been reviewed and accepted b the following personnel.        RWP:         N/A ZIT        ~'u-                                                                 Dose:      N/A      mr.
Prepared By:                    Level:        Date:    Utili  Reviewed By:

==Title:==
bate:
Reviewed By:   K                Level:        Date:    ANII Reviewed By:

==Title:==
Date:         Page    1    of   7'

LaSalle Unit1 N2E Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                 TOTAL CODE COVERAGE 0
Area Scanned               % of Area Scanned  Degrees Scanned                % Scanned Area Inch2      Auto         Manual           Auto        Manual Auto        Manual        Auto         Manual N
0&deg; WELD METAL          76.82          0.0           41.1            0.0          53.4 0.0          360.0         0.0           53.4 45&deg; T-SCAN  N 76.82          0.0           63.1            0.0          82.2  0.0         360.0         0.0           82.2 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0 0.0           0.0          0.0            0.0 450 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0 0.0           0.0          0.0            0.0 600 T-SCAN   N     76.82          0.0           66.1            0.0          86.1 0.0          360.0         0.0          86.1 600 T-SCAN  N/A    76.82          0.0            0.0            0.0           0.0 0.0           0.0          0.0            0.0 600 T-SCAN  N/A    76.82          0.0            0.0            0.0           0.0 0.0           0.0          0.0           0.0 450 P-SCAN CW N     76.82          0.0           51.1            0.0          66.5 0.0          360.0         0.0          66.5 60' P-SCAN CW     N     76.82          0.0           54.5            0.0          70.9 0.0          360.0         0.0          70.9 45' P-SCAN CCW N     76.82          0.0           51.1            0.0          66.5 0.0          360.0         0.0          66.5 60' P-SCAN CCW     N     76.82          0.0           54.5            0.0          70.9 0.0          360.0         0.0          70.9 Coverages      0.0          70.9 Total Composite Coverage =      70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
t, CovCatc.xls 10/6/00 I

LaSalle 1 Recirculation Inlet (N2) 00 L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage 600 C
N                                         -o N                                         C, N
0

LaSalle 1 Recirculation Inlet (N2) 45* and 60* P-Scan examination coverage
/
                                          -'0 N
* Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                             IR9 021 GE NUCLEAR ENERGY Site and Unit:                     LaSalle                           Component ID:                           LCS-1-N2F Outage:                 LI R09                                                                      N-SH System:
ExmIefre RPV    Dat ASME Cat.:
She B-O I   I ASME Item B3.90            Aug Requirements:             N/A Exams Performed       Data Sheet        Cal Sheet          Procedure          Calibration Block      Examination    Cert Level      Date Personnel 0&deg;Long.            RPV-032             N/A          UT-EXLN-300 V4            01-91-03          Paul Anderson       II       01/17/2002 60   S Shear          RPV-033             N/A          UT-EXLN-300 V4            01-91-03          Paul Anderson       II       01/17/2002
.   '45- Shear -    ['-  RPV-034             N/A          UT-EXLN-300 V4            01-91-03          Paul Anderson       II       01/17/2002 Examination Results:
Manual 00 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2F Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section Xl 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 70.9%
Examination results were comparedto data report     0-121,130,140 from             R04      outage with     7   No Change These examinationswere performed under Work Order:              99270105                                    D     Change This Summary and the following data sheets have been re       wed and accepted by the following personnel:       RWP:        N/A
( 2. ADose:                                                                    N/A     mr.
4repared By:                    Level:        Date:     Utility Reviewed By:

==Title:==
/fate Reviewed By:                    Level:        Date:     ANII Reviewed By:

==Title:==
Date:         Page    1   of

LaSalle Unit1 N2F Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                   TOTAL CODE COVERAGE 2                      Area Scanned               % of Area Scanned    Degrees Scanned                % Scanned o   Area Inch       Auto          Manual          Auto         Manual Auto         Manual        Auto         Manual 0&deg; WELD METAL    N     76.82          0.0           41.1            0.0          53.4   0.0          360.0         0.0          53.4 450 T-SCAN  N     76.82          0.0           63.1            0.0          82.2   0.0          360.0         0.0          82.2 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0   0.0           0.0          0.0           0.0 450 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0   0.0           0.0          0.0           0.0 600 T-SCAN  N     76.82          0.0           66.1            0.0          86.1   0.0          360.0         0.0          86.1 600 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0   0.0           0.0          0.0           0.0 600 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0   0.0           0.0          0.0           0.0 450 P-SCAN CW    N     76.82          0.0           51.1            0.0          66.5   0.0          360.0         0.0          66.5 60' P-SCAN CW    N     76.82          0.0           54.5           0.0           70.9  0.0           360.0        0.0           70.9 450 P-SCAN CCW     N     76.82          0.0           51.1           0.0           66.5  0.0           360.0        0.0           66.5 60' P-SCAN CCW     N     76.82          0.0           54.5           0.0           70.9  0.0           360.0        0.0           70.9 Coverages      0.0           70.9 Total Composite Coverage =      70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
(.0
 -,4 CovCalc.xis 10/6/00
                                                                                                                                                        ~0 C

LaSalle 1 Recirculation Inlet (N2) 0* L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage 0OO N

LaSalle 1 Recirculation Inlet (N2) 450 and 600 P-Scan examination coverage I

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                              IR9-022 GE NUCLEAR ENERGY t*
(   S#e and Unit:                        LaSalle                        Component 1D.                           LCS-1 -N2J Outage:                  LI R09                                                                    N-SH System:        RPV        ASME Cat.:       B-D       ASME Item           83. 90            Aug Requirements:               N/A Exams Performed        Data Sheet                         Procedure          Calibration Block       Examination    Cert Level       Date
_1t~               eetI                                                            Personnel 60
* Shear           RPV-01 1          N/A           UT-EXLN-300 vyv          01-91-03          Charles Barrett   II          01/15/2002 0&deg; Long' e       ]  . RPV-003           N/A           UT-EXLN-300 vj           01-91-03           Todd Ginder          II      01/15/2002 46- Shegr"-;'i   , RPV-007            N/A           UT-EXLN-300 V4           01-91-03          Edward Mazyck         II      01/15/2002 Examination Results:
Manual 01 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2J Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section XI 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.150 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 70.9%
Examination results were comparedto data report    D-115,133,143 from            L1 R04     outage with     [    No Change These examinations were performed under Work Order:            99270105                                      D    Change This Summary and the following data sheets have been review d and a      e     by      following personnel.,     RWP:         N/A L.4                                                                                Dose:       N/A      mr.
Prepared By:                      Level:     Date:     Utility Reviewed By:                  le:             :_               _     _     _
Reviewed By:                     Level:     Date:     ANII Reviewed By:

==Title:==
Date:           Page   1    of     7

LaSalle Unit1 N2J Recirculation Inlet JAN. 2002 CODE CROSS-SECTIONAL AREA                                   TOTAL CODE COVERAGE 0
Area Scanned               % of Area Scanned    Degrees Scanned               % Scanned Area Inch 2     Auto         Manual           Auto         Manual Auto         Manual       Auto         Manual 0Q WELD METAL    N     76.82          0.0           41.1            0.0          53.4   0.0          360.0        0.0           53.4 450 T-SCAN  N 76.82          0.0           63.1            0.0          82.2   0.0          360.0        0.0           82.2 450 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0   0.0           0.0         0.0            0.0 450 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0   0.0           0.0         0.0            0.0 60o T-SCAN  N     76.82          0.0           66.1            0.0          86.1   0.0          360.0        0.0           86.1 600 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0   0.0           0.0         0.0            0.0 60&deg; T-SCAN N/A    76.82          0.0            0.0            0.0           0.0   0.0           0.0         0.0            0.0 450 P-SCAN CW N     76.82          0.0           51.1            0.0          66.5   0.0          360.0        0.0           66.5 600 P-SCAN CW    N     76.82          0.0           54.5            0.0          70.9   0.0          360.0        0.0           70.9 450 P-SCAN CCW N     76.82          0.0           51.1            0.0          66.5   0.0          360.0        0.0           66.5 600 P-SCAN CCW     N     76.82          0.0           54.5            0.0          70.9   0.0          360.0        0.0           70.9 Coverages     0.0           70.9 Total Composite Coverage        70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
tJ'
                                                                                                                                                       >41 CavCaic~xis 10/6/00 N

LaSalle 1 Recirculation Inlet (N2) 00 L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage I
00
                                              -0
-.4 P'J

LaSalle 1 Recirculation Inlet (N2) 450 and 600 P-Scan examination coverage
   /
Na
                                             -0 "N

S,,Report                                                                                   No.:
EXAMINATION 

==SUMMARY==
SHEET                                              1RE23 NUCLEAR ENERGY                                  ETMGE                                                                __ER Site and Unit:                       LaSalle                             Component ID:                            LCS-I -N2K Outage:                  LI R09                                                                         N-SH System:      RPV           ASME Cat.:        B-D        ASME Item              B3.90             Aug Requirements:             N/A Exams Performed      Data Sheet           Cal Shee             Procedure          Calibration Block       Examination    Cert Level      Date
_WI                             _                                                   Personnel 0&deg; Long.         RPV-002               N/A              UT-EXLN-300              01-91-03            Todd Ginder        II      01/15/2002 45&deg; Shear.        RPV-006               N/A              UT-EXLN-300 v*           01-91-03           Edward Mazyck       II      01/15/2002
   ,i            4    RPV-010 XShea*'           N/A              UT-EXLN-300 v(J          01-91-03           Charles Barrett     II      01/15/2002 Examination Results:
Manual 00 weld and base metal, 450/600 S transverse and parallel scans were performed on the N2K Recirculation inlet nozzle in accordance with procedure UT-EXLN-300 V4.
Manual scanning was performed 3600 around the nozzle.
There were no recordable indications.
Due to the nozzle configuration it is not possible to examine 100% of the ASME code required area.
Ultrasonic examination results were acceptable to the requirements of ASME B&PVC Section X1 1989 Edition, no Addenda, Category B-D welds and USNRC Reg. Guide 1.1 50 Revision 1 (Alternate Method).
Previous examination results were reviewed, no change.
Manual composite coverage = 70.9%
Examination results were comparedto data report         D-124,134,144 from            L1 R04     outage with     . No Change These examinations were performed under Work Order:                99270105                                       D    Change This Summary and the following data sheets have been re 'wed and accep               by th following personnel:       RWP:        N/A
                        ,         pJJ4.         i           _~          .                                                 Dose:      N/A     mr.
Prepared By:                      Level:        Date:      Utility Reviewed By:       /

==Title:==
+Da R  d    Leel          Date:   . ANII R            yta Reviewed By.                      Level:        Date:      ANII Reviewed By:

==Title:==
Date:          Page    1 of7

LaSalle Unit1 N2K Recirculation Inlet
                                                                                                                      *...=
JAN. 2002
                                                                                                                       *'=..
CODE CROSS-SECTIONAL AREA                                 TOTAL CODE COVERAGE 0
Area Scanned               % of Area Scanned  Degrees Scanned                    % Scanned 2
Area Inch       Auto         Manual           Auto        Manual Auto        Manual            Auto         Manual 0
          &deg; WELD METAL   N     76.82          0.0           41.1            0.0          53.4  0.0         360.0             0.0           53.4 450 T-SCAN  N     76.82          0.0           63.1            0.0          82.2  0.0         360.0             0.0           82.2 45&deg; T-SCAN NIA    76.82          0.0            0.0            0.0           0.0 0.0           0.0              0.0            0.0 450 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0  0.0          0.0              0.0            0.0 600 T-SCAN  N     76.82          0.0           66.1            0.0          86.1 0.0          360.0             0.0           86.1 600 T-SCAN NIA    76.82          0.0            0.0            0.0           0.0 0.0           0.0              0.0            0.0 600 T-SCAN N/A    76.82          0.0            0.0            0.0           0.0 0.0           0.0              0.0            0.0 450 P-SCAN CW    N     76.82          0.0           51.1            0.0          66.5 0.0          360.0             0.0           66.5 600 P-SCAN CW    N     76.82          0.0           54.5            0.0          70.9 0.0          360.0             0.0           70.9 450 P-SCAN CCW     N     76.82          0.0           51.1            0.0          66.5 0.0          360.0             0.0           66.5 600 P-SCAN CCW     N     76.82          0.0           54.5            0.0          70.9 0.0          360.0             0.0           70.9 Coverages           0.0           70.9 Total Composite Coverage =           70.9 COMMENTS:
Manual UT scans were limited due to nozzle radius.
*0.~~
N                                                                                                                                       CovCaic.xls 1016/00

:=i U
LaSalle 1 Recirculation Inlet (N2)
      -450 and 600 P-Scan examination coverage I
'1~
 '4

LaSalle 1 Recirculation Inlet (N2) 0* L-Wave Scan examination coverage 450 and 600 T-Scan examination coverage 0o
"-4i
                                             -o 0
                                             'NJ
                                             '%tJ

          ~GE               NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                    REPORT NO: 1R9-024 PROJECT              LaSalle Unit 1 - L1RO9 WELD ID:             LCS-1-N4A SYSTEM:              RPV - FEEDWATER INITIAL CALIBRATION ID:                          NOZ.IN1, 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4A.2, N4A.3, N4A.70RL.1, N4A.70RL.2 DATA SHEETS:                                     n4a.tI.1, n4a.tl.2, n4a.tl.3, n4a.pl.1, n4a.p 2 .1, n4a.70rl.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              NIA EXAMINERS:..-                                    J. Kent Montgomery, Lv II, Mark Hilborn, Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1.150 Revision 1 (Alternative Method).
Automated 0', 2.25 L-Wave; 450 and 600 Shear 1.0 MHz and 700 RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Initial calibrations for the 0&deg;, 450 and 600 Shear automated examinations were performed on code vessel block - SIN -
01-91-03. Calibration for the 700 RL automated examinations were performed on GENE sizing block, S/N -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 0' reference is located 90' CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0&deg; Weld Metal                  - Entry Surface Noise, Geometry - Clad Noise 450 Transverse                 - Entry Surface Noise, Geometry - Clad Noise, Non-Relevant Reflector 600   Transverse               - Entry Surface Noise, Geometry - Clad Noise, Geometry - Nozzle Bore 450   Parallel                 - Geometry - Clad Noise 600   Parallel                 - Entry Surface Noise, Geometry - Clad Noise 700  Transverse                - Entry Surface Noise 70* Parallel                   - Entry Surface Noise These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded one (1) indication with the 450 Tranverse search unit over 20% DAC which was found to be acceptable.
No other indications requiring evaluation according to ASME B&PV Code Section X1 or USNRC Reg Guide 1.150 Revision 1 (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 0',450 and 600 UT Coverage = 72.3%. Credit for the 45&deg;/600 near field taken with the 70*.
Automated 70' Near Surface UT Coverage = 44.7%
Previous data was reviewed prior to the examination, changes are noted below.
The GERIS 2000 Automated system records the complete RF data during scanning, it also utilizes search units with lower frequency elements and'improved ultrasonic coupling. The GERIS 2000 Automated System has shown that with its improvements in examination techniques, indications have better reflectivity with a 1 MHz search unit over a 2.25 MHz.,
which could explain why this indication was not recorded during the prior manual inspection.
Ii LA SALLE SUMNV.DOC                                                                                                        13c PAGEL...OF       -

LaSalle Unit I N4A Jan-02 CODE CROSS-SECTIONAL AREA                                        TOTAL CODE COVERAGE "a
Area Scanned               % of Area Scanned        Degrees Scanned                    % Scanned 0    Area Inch 2          Auto          Manual          Auto         Manual     Auto          Manual           Auto         Manual 0OWELD METAL     N       59.12             31.12            0.0          52.6           0.0      360.0            0.0           52.6           0.0 45&deg; T-SCAN N       59.12            47.77             0.0          80.8           0.0      360.0            0.0           808            0.0 60' T-SCAN N       59.12             50.16            0.0          84.8           0.0      360.0            0.0           84.8           0.0 N       59.12              0.0             0.0           0.0           0.0       0.0             0.0            0.0           0.0 450 P-SCAN CW    N       59.12             37.90            0.0          64.1           0.0      360.0            0.0           64.1           0.0 600 P-SCAN CW    N       59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 450 P-SCAN CCW N       59.12            37.90             0.0          64.1           0.0      360.0            0.0           64.1           0.0 600 P-SCAN CCW     N       59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 72.3           0.0 Total 0*, 45* and 60&deg; Coverage =       72.3 70&deg; T-SCAN 70' P-SCAN CW N
N 21.13 21.13 11.75 8.28 0.0 0.0 1    55.6 39.2 0.0 0.0 360.0 360.0 0.0 0.0 55.6 39.2 0.0 0.0 700 P-SCAN CCW    N       21.13             8.28             0.0          39.2           0,0      360.0            0.0           39.2           0,0 44.7           0.0 Total 70&deg; Coverage        44.7 COMMENTS:
IAutomated UT scans were limited due to the nozzle radius.
ICredit for the initial 114" of material in code coverage taken with the 700                                                    1 02/29/01

LEsEIe  E FEEl)WATER Coole Required Exam Votume --; 59.12 Sq, In.
0&deg; L-Wave Exam Volume - 31.12 Sq, In, 45&deg; T-Scmn Exam Volume - 47.77 Sq, In, 60* T-Scan Exam Volume 50,16 Sq, In, c~cr

LasaUle I FEEDWATER Code Required Exam Volume - 59, 12 Sq, In, 450 P-Scan Exam Volume -  37390 Sq, In, 600 P-Scan Exam Volume 47,15 Sq. In,

                            .:3 Lcsatte 1 FEEDWATER Code Required Exam Volume -     26.13 Sq, In, 70&deg; T-Scan Exam VoLume -  11.75 Sq. In, 70* P-Scan Exam VoLume 8,25 Sq, In, 70&deg;T

Noazi   r(3)
GOD-SL6C.xls LaSalle I                                                                                                                                   09/18/00 N4 FEEDWATER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD             17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                          INDEX INDEX   STEP         RADIAL DISTANCE   AGATE BE GATE      C GATE FIXTURE CPU CH     TYPE    usec          X        Y       DEG  INCHES  INCHES        START     STOP   STOP   START STOP  STOP     ANGLE ANGLE 4     0.00      B     3.66        0.00      0.00      0.8"   0.501   0.150          0      19.74     91    47     79    56 1     0.00     W      3.66        0.00      0.00      0.8&deg;   0.320   0.150          0       6.36     91     -      -    56        -
2    45.0"      T     13.26       3.00      0.00      0.8&deg;   0.418   0.150          0      13.61    235                  -      7.2&deg;   -7.2&deg; 3    60.0&deg;      T     14.15      -3.00      0.00      0.8&deg;   0.501   0.150          0      19.74    328                       354.0&deg;    6.0&deg; 2    45.00     P1     13.26       3.00      0.00      0.8'   0.341   0.150          0       7.94    235                       300.5&deg;   59.5&deg;    (ccw) 3    60.00     P1     14.15      -3.00      0.00      0.8'   0.383   0.150          0      10.97    328                       295.6-  64.4-     (ccw) 2    45.0&deg;     P2     13.26       3.00      0.00      0.8*   0.341   0.150          0       7.94    235                        78.1   -78.1&deg;    (cw) 3    60.0&deg;     P2     14.15      -3.00      0.00      0.8*   0.383   0.150          0       10.97   328                        47.8&deg;  -47.8&deg;    (cw) 1/17/2002                                                                      Page 1                                                                3108 PM

No., 10 GOD-SL6C.xls LaSalle 1                                                                                                                                   09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD             17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                         INDEX  INDEX   STEP       RADIAL DISTANCE   AGATE   BE GATE      C GATE FIXTURE CPU CH     TYPE   usec          X          Y     DEG   INCHES  INCHES       START    STOP   STOP      START STOP STOP     ANGLE ANGLE 1     70I0'    T      12.00        ,00      0.00     0.8&deg;    0.387   0.150        0       11.27    54                           0.0&deg;   0.0&deg; 2     70.0'    P1     12.00      3.00       0.00     0.8     0.316   0.150,       0       6.10     54 -(ccw)                  28-5&deg;   72.5-3     70,0'    P2     12M0       -3.00      0.00     -0.8*   0.316   0.150        0       6.10     54                          72.5*  -72,5'  :(cw) 1/1712002                                                                      Page 1                                                                 *.4in c)Aj

OGEUT EXAMINATION      NUCLEAR ENERGY

==SUMMARY==
SHEET                       REPORT NO: 1R9-025 PROJECT              LaSalle Unit 1 - L1RO9 WELD ID:             LCS-1-N4B SYSTEM:              RPV - FEEDWATER INITIAL CALIBRATION ID:                          NOZIN., 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4B.1, N4B.2, N4B.70RL.1, N4B.70RL.2 DATA SHEETS:-                                    n4c.tl.1, n4c.pl.1, n4c.p2.1, n4c.70rI.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              N/A EXAMINERS              ....                      J. Kent Montgomery, Lv II, Mark Hilborn, Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1.150 Revision 1 (Alternative Method).
Automated 0', 2.25 L-Wave; 450 and 600 Shear 1.0 MHz and 70&deg; RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Automated scanning was limited due to the nozzle OD blend radius.
Initial calibrations for the 00, 450 and 600 Shear automated examinations were performed on code vessel block - SIN -
01-91-03. Calibration for the 700 RL automated examinations were performed on GENE sizing block, SIN -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 00 reference is located 90* CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0' L-Wave                      - Entry Surface Noise, Geometry - Clad Noise 450 Transverse                 - Entry Surface Noise, Geometry - Clad Noise, Geometry - Nozzle b6re 600  Transverse                - Entry Surface Noise, Geometry - Clad Noise, Geometry - Nozzle Bore 450   Parallel                 - Entry Surface Noise, Geometry - Clad Noise 600   Parallel                 - Entry Surface Noise, Geometry - Clad Noise 700  Transverse                - Entry Surface Noise, Non-Relevant Reflector 700   Parallel                 - Non-Relevant  Reflector These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded one (1) indication with the 70&deg; Tranverse search unit that was found to be acceptable per the requirements of ASME B&PV Code Section Xl, 1989 Edition No Addenda Table IWB 3510-1 No other indications requiring evaluation according to ASME B&PV Code Section Xl or USNRC Reg Guide 1.150 Revision 1 (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 0',450 and 600 UT Coverage = 72.3%
Automated 700 Near Surface UT Coverage = 44.7%
Credit for the 450/600 near field taken with the 700.
Previous data was reviewed prior to the examination, changes are noted below.
There was no previous 700 Near Surface data to review or compare.
Ii LA SALLE SUMNV.DOC                                                                                               R0 y PAGE          OF

LaSalle Unit I N4B Jan-02f
                                                                                                                               +
N4B Jan-02 I*
LaSalle Unit
                                                                                                                             +*
CODE CROSS-SECTIONAL AREA                                     TOTAL CODe COVERAGE Area Scanned           % of Area Scanned        Degrees Scanned                      % Scanned 0                    2 Area Inch            Auto          Manual       Auto        Manual      Auto          Manual             Auto        Manual 0&deg; WELD METAL    N          59.12             31.12          0.0         52.6           0.0      360.0            0.0             52.6           0.0 450 T-SCAN N          59.12             47.77          0.0         80.8           0.0      360.0            0.0             80.8           0.0 600 T-SCAN N          59.12             50.16          0.0         84.8           0.0      360.0            0.0             84.8           0.0 N           59.12              0.0          0.0          0.0           0.0       0.0             0.0              0.0           0.0 450 P-SCAN CW    N          59.12             37.90          0.0         64.1           0.0      360.0            0.0             64.1           0.0 60' P-SCAN CW    N           59.12            47.15          0.0         79.8           0.0      360.0            0.0             79.8           0.0 450 P-SCAN CCW     N          59.12             37.90          0.0         64.1           0.0      360.0            0.0             64.1           0.0 600 P-SCAN CCW     N          59.12             47.15          0.0         79.8           0.0      360.0            0.0             79.8           0.0 72.3           0.0 Total 0&deg;, 450 and 60* Coverage =         72.3 70' T-SCAN  N 21.13             11.75          0.0         55.6           0.0      360.0            0.0             55.6           0.0 70' P-SCAN CW   N          21.13              8.28          0.0         39.2           0.0      360.0            0.0             39.2           0.0 700 P-SCAN CCW    N          21.13              8.28          0.0         39.2           0.0      360.0            0.0             39.2           0.0 44.7           0.0 Total 700 Coverage =       44.7 COMMENTS:
I I..   -       J. I... *=             .      . ..           .
Automated u I scans were limited aue to he nozzle radius.
Credit for the initial 114" of material in code coverage taken with the 700                                                     I &#xfd;"--

LcscWle I FEED WATER Code -Required Exam Volume  -  59,12 .&#xfd;q. In, 0* L-WVIve Exaim Volume - 31,12 Sq. It 45&deg; T-Scn Exam Volume - 47.77 Sq, In, 60&deg; T-Scon Exam Volume 50.16 Sq, In,

Lasalle 1 FEEDWATER Codle Required Exam Volume 1 59.12 Sq, In, 450 P-Scan Exam Volume -   37,90 Sq, In.
600 P-&deg;Scan Exam Volume 47.15 Sq, In,

L*csUle       1 FEEDWATER Code Required Exam Volume - 26,13 Sq, In, 70&deg; T-Scan Exam Volume -  11.75 Sq. In.
70&deg; P-Scan Exam Volume 8,25 Sq, In.
70-T 70-P 70*P                 70TT I
I-fl I          I I.___________

NozT_,m(3)
GOD-SL6C.xls LaSalle 1                                                                                                                                 09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD             17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                          INDEX INDEX   STEP      RADIAL DISTANCE   AGATE BE GATE      C GATE FIXTURE CPU CH      TYPE   usec          X          Y      DEG  INCHES  INCHES      START    STOP   STOP   START STOP  STOP     ANGLE ANGLE 4     0.00     B      3.66       0.00       0.00      0.8"   0.501   0.150       0      19.74     91    47     79    56 1     0.0"     W      3.66       0.00       0.00      0.8"   0.320   0.150       0       6.36     91     -           56        --
2    45.00     T     13.26       3.00       0.00      0.8"   0.418   0.150       0      13.61    235                         7.2-   -7.2" 3    60.0'     T     14.15       -3.00      0.00      0.8"   0.501   0.150       0       19.74   328                       354.0. 6.0" 2    45.00    P1     13.26       3.00       0.00      0.8"   0.341   0.150       0       7.94    235                       300.5'   59.5"    (ccw) 3    60.0&deg;    P1     14.15       -3.00      0.00      0.8"   0.383   0.150       0       10.97   328                       295.60   64.4"    (ccw) 2    45.0*    P2     1326        3.00       0.00      0.8&deg;   0.341   0.150       0       7.94    235                        78.1   -78.1     (cw) 3    60.00    P2     14.15       -3.00      0.00      0,8    0.383   0.150       0       10.97   328                        47.80  -47.8-    (cw) 1117/2002                                                                     Page I                                                              3:08 PM

Noz, W0 GOD-SL6C.xis LaSalle I                                                                                                                             09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                    25 VSLIR                   127 WALL                   6.69 WELD RAD              17.25 ODBR                     4 TYPE                  F     (F-FLANGE OR B-BARREL)
Delay                         INDEX INDEX   STEP       RADIAL DISTANCE   AGATE BE GATE     C GATE FIXTURE CPU CH      TYPE   usec          X          Y     DEG  INCHES  INCHES       START    STOP   STOP   START STOP STOP     ANGLE ANGLE 1     70.0"     T      12,00      0.00       0.00     0.8*   0.387   0.150        0       11.27    54                        0.0&deg;   0.0" 2     70.0*     P11    12,00      3.00       0.00     0.8*   0.316   0.150        0       6.10     54                      287.5"  72.5*   (ccw) 3     70.0*     P2     12M0       -3.00      0.00     0."    0.316   0.150        0       6.10     54                       72.5'  -72.5*  (cw) 1/17/2002                                                                      Page I                                                            3A10 PM

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   REPORT NO: 1R9-026 PROJECT               LaSalle Unit 1 - Li R09 WELD ID:              LCS-1-N4C SYSTEM:               RPV - FEEDWATER INITIAL CALIBRATION ID:                          NOZ.IN.1, 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4B.2, N4C.1, N4D.70RL.1, N4C.70RL.1 DATA SHEETS:                                     n4c.tI.1, n4c.pl.1, n4c.p2.1, n4c.70ri.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              N/A EXAMINERS:                                       J. Kent Montgomery, Lv II, Mark Hilborn, Lv II U6tfrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1.150 Revision 1 (Alternative Method).
Automated 0&deg;, 2.25 L-Wave; 450 and 60* Shear 1.0 MHz and 700 RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Initial calibrations for the 0&deg;, 450 and 600 Shear automated examinations were performed on code vessel block - S/N -
01-91-03. Calibration for the 70&deg; RL automated examinations were performed on GENE sizing block, SIN -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 0' reference is located 90' CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0&deg; L-Wave                      - Entry Surface Noise, Geometry - Clad Noise 00 Base Metal                  - Entry Surface Noise 450 Transverse                 -Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle bore 600 Transverse                 - Entry Surface Noise, Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle Bore 450  Parallel                  - Geometry - Clad Noise 600  Parallel                  - Geometry - Clad Noise, Non-Relevant Reflector 70'  Transverse                - Entry Surface Noise 700  Parallel                  - Entry Surface Noise These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded one (1) indication with the 450 Tranverse search unit over 20% DAC which was found to be acceptable.
No other indications requiring evaluation according to ASME B&PV Code Section XI or USNRC Reg Guide 1.150 Revision 1 (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 0',45' and 600 UT Coverage = 72.3%. Credit for the 450/600 near field taken with the 700.
Automated 70' Near Surface UT Coverage = 44.7%
Previous data was reviewed prior to the examination, changes are noted below.
The GERIS 2000 Automated system records the complete RF data during scanning, it also utilizes search units with lower frequency elements and improved ultrasonic coupling. The GERIS 2000 Automated System has shown that with its improvements in examination techniques, indications have better reflectivity with a 1 MHz search unit over a 2.25 MHz.,
which could explain why this indication was not recorded durinn the prior manual inspection.
EP         BY      '             REVIE9VED BY         DATIE   '        0"       // 6ATE    ANI4  REVIEW        DATE
__*I OF J
PAGE LA SALLE SUMNV.DOC                                                                                                !   C4 PAGE      I___ Of

LaSalle Unit 1 N4C Jan-02 CODE CROSS-SECTIONAL AREA                                          TOTAL CODE GOVERAGE 4D Area Scanned                    % of Area Scanned    Degrees Scanned                    % Scanned 0,             2                                                                Auto          Manual           Auto         Manual Area Inch           Auto             Manual            Auto          Manual 00 WELD METAL    N      59.12            31.12             0.0               52.6            0.0 360.0            0.0           52.6           0.0 45&deg; T-SCAN N      59,12            47.77             0.0               80.8            0.0 360.0            0.0           80.8           0.0 600 T-SCAN N      59.12            50.16             0.0               84.8            0.0 360.0            0.0           84.8           0.0 N      59.12              0.0             0.0                0.0            0.0  0.0             0.0            0.0           0.0 450 P-SCAN CW    N      59.12            37.90             0.0               64.1            0,0 360.0            0.0           64.1           0.0 600 P-SCAN CW    N      59.12            47.15             0.0               79.8            0.0 360.0            0.0           79.8           0.0 450 P-SCAN CCW     N      59.12            37.90             0.0               64.1            0.0 360.0            0.0           64.1           0.0 600 P-SCAN CCW     N      59.12            47.15             0.0               79.8            0.0 360.0           0.0            79.8           0.0
* ________   -________ ________        _______if                                72.3           0.0 Total 00, 450 and 600 Coverage   =      72.3 70* T-SCAN  N      21.13            11.75             0.0               55.6            0.0 360.0            0.0           55.6           0.0 70* P-SCAN CW   N      21.13             8.28             0.0               39.2            0,0 360.0            0.0           39.2           0.0 70* P-SCAN CCW    N      21.13             8.28             0.0               39.2            0.0 360.0            0.0           39.2           0.0 44.7           0.0 Total 700 Coverage =      44.7 COMMENTS:
Automated UT scans were limited due to the nozzle radius.
Credit for the initial 1/4" of material in code coverage taken with the 70&deg;                                                      02/29/0' 102/29/01

Lasale 1 FEEDWATER Code Required Exam Votume  - 59.12 Sq. In, 0&deg; L-Wave Exam Volume - 31,12 Sq, In, 45* T-Scan Exam Volume - 47,77 Sq, In.
600 T-Scan Exam Volume 50,16 Sc, In,

Lasa~Le 1 FEEDWATER Code Required Exam Volume  -: 59,12 Sq, In, 45* P-Scan Exam Volume - 37.90 Sq, In, 60* P-Scan Exam Volume 47,15 Sco. In, p

LasPate 1 FEEDWATER Code Required Exam Volume -   26,13 Sq, In, 70&deg; T-Scan Exam Volume -  11.75 Sq. In.
700 P-Scan Exam Volume 8,25 Sq. In.
70&deg;T

Noz'i _r(3)
GOD-SL6C.xls LaSalle 1                                                                                                                                 09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING UMITS NOZOD                    25 VSLIR                   127 WALL                   6.69 WELD RAD              17.25 ODBR                     4 TYPE                   F    (F-FLANGE OR B-BARREL)
Delay                          INDEX INDEX   STEP        RADIAL DISTANCE  AGATE BE GATE      C GATE FIXTURE CPU CH       TYPE   usec         X          Y      DEG  INCHES  INCHES        START    STOP  STOP   START STOP  STOP     ANGLE ANGLE 4      0.00      B     3.66       0.00       0.00      0.8*   0.501   0,150         0      19.74    91    47     79    56 1      0.0*     W      3.66       0.00       0.00      0.8&deg;   0.320   0.150         0       6.36    91     -      -    56 2     45.0"      T     13.26      3.00       0.00      0.8*   0.418   0,150         0      13.61   235                         7.2"   -7.2-3     60.0"      T     14.15      -3.00      0.00      0.80   0.501   0.150         0      19.74   328                       354.0. 6.0*
2     45.0&deg;     P1     13.26      3.00       0.00      0.8"   0.341   0.150         0       7.94   235                       300.5*   59.5"    (ccw) 3     60.0"     P1     14.15      -3.00      0.00      0.81   0.383   0.150         0      10.97   328                       295.6'   64.40    (ccw) 2     45.00     P2     13.26      3.00       0.00      0.8"   0.341   0.150         0       7.94   235                        78.1   -78.1     (cw) 3     60.00     P2     14.15      -3.00      0.00      0.8&deg;   0.383   0.150         0      10.97   328                       47.80   -47.8-    (cw) 1/17/2002                                                                      Page I                                                               3:08 PM

Noz,' i GOD-SL6C.xls LaSalle I                                                                                                                              09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                    25 VSLIR                   127 WALL                   6.69 WELD RAD              17,25 ODBR                     4 TYPE                  F     (F-FLANGE OR B-BARREL)
Delay                         INDEX  INDEX   STEP      RADIAL DISTANCE  AGATE BE GATE     C GATE FIXTURE CPU CH      TYPE   usec          X          Y     DEG   INCHES  INCHES       START   STOP  STOP   START STOP STOP     ANGLE ANGLE 1     70.0&deg;      T     12.00      000        0.00      0.8*   0.387   0150          0    11.27    54                        0.0&deg;   0.0" 2     70.0&deg;     P1     12.00      3.00       0.00      0.8"   0.316   0.150         0     6.10    54                      287.5*  72,50    (ccw) 3     70.0*     P2     1200       -3.00      0.00      0.8&deg;   0.316   0.150         0     6.10    54                       72.5"  -72,5"   (cw) 1/17/2002                                                                      Page I                                                            3:10 PM

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   REPORT NO: 1R9-027 PROJECT              LaSalle Unit 1 - L1RO9 WELD ID:             LCS-1-N4D SYSTEM:              RPV- FEEDWATER INITIAL CALIBRATION ID:                          NOZ.IN.1, 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4D.1, N4C.70RL.1 DATA SHEETS:                                     n4d.tl.1, n4d.tl.2, n4d.pl,1, n4d.pl.2, n4d.p2.1, n4d.70rl.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              N/A EXAMINERS: .J.                                      Kent Montgomery, Lv II, Mark Hilborn, Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1.150 Revision 1 (Alternative Method).
Automated 0', 2.25 L-Wave; 450 and 600 Shear 1'0 MHz and 70&deg; RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Initial calibrations for the 0&deg;, 450 and 600 Shear automated examinations were performed on code vessel block - SIN -
01-91-03. Calibration for the 700 RL automated examinations were performed on GENE sizing block, S/N -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 0' reference is located 90&deg; CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0' L-Wave                      - Entry Surface Noise, Geometry - Clad Noise, Non-Relevant Reflector 45* Transverse                 - Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle bore 600 Transverse                 - Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle Bore 450 Parallel                   - Geometry - Clad Noise 60o Parallel                   - Entry Surface Noise, Geometry - Clad Noise 70' Transverse                 - Entry Surface Noise, Electrical Noise 700 Parallel                   - Entry Surface Noise, Electrical Noise These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded three (3) indications with the 450 Tranverse search unit and one (1) indication with the 600 Transverse search unit that were over 20% DAC, all were found to be acceptable. No indications were recorded over 50% DAC.
No other indications requiring evaluation according to ASME B&PV Code Section XI or USNRC Reg Guide 1.150 Revision 1 (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 00,450 and 60' UT Coverage = 72.3%
Automated 70* Near Surface UT Coverage = 44.7%
Credit for the 450/60' near field taken with the 70'.
Previous data was reviewed prior to the examination, changes are noted below.
The GERIS 2000 Automated system records the complete RF data during scanning, it also utilizes search units with lower frequency elements and improved ultrasonic coupling. The GERIS 2000 Automated System has shown that with its improvements in examination techniques, indications have better reflectivity with a 1 MHz search unit over a 2.25 MHz.,
which could explain why this indication was not recorded during the prior manual inspection.
SUMNV.DOC                                                                                                    LA SALLE PAGE     /    OF .,.i ,..,

4.;
LaSalle Unit 1 N4D Jan-02 CODE CROSS-SECTIONAL AREA                                         TOTAL CODE COVERAGE 0I Area Scanned               % of Area Scanned        Degrees Scanned                    % Scanned Area Inch 2          Auto          Manual          Auto        Manual      Auto          Manual           Auto         Manual 00 WELD METAL   N       59.12            31.12             0.0          52.6           0.0      360.0            0.0           52.6           0.0 450 T-SCAN N       59.12            47.77             0.0          80.8           0.0      360.0            0.0           808            0.0 60&deg; T-SCAN N       59.12            50.16             0.0          84.8           0.0      360.0            0.0           84.8           0.0 N       59.12              0.0             0.0           0.0           0.0       0.0             0.0            0.0           0.0 450 P-SCAN CW    N       59.12            37.90             0.0          64.1           0.0      360.0            0.0           64.1           0.0 600 P-SCAN CW    N       59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 45' P-SCAN CCW            59.12            37.90             0.0 N                                                       64.1           0.0      360.0            0.0           64.1           0.0 60' P-SCAN CCW    N       59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 72.3           0.0 Total 0', 450 and 60* Coverage         72.3 70 T-SCAN   N       21.13            11.75             0.0          55.6           0.0      360.0            0.0           55.6           0.0 70&deg; P-SCAN CW   N       21.13             8.28             0.0          39.2           0.0      360.0            0.0           39.2           0.0 70' P-SCAN CCW    N       21.13             8.28             0.0          39.2           0.0      360.0            0.0           39.2           0.0 44.7           0.0 Total 700 Coverage =      44.7 COMMENTS:
I-I-
ni Automated UT scans were limited due to the nozzle radius.
ICredit for the initial 1/4" of material in code coveraae taken with the 700 102/29/01

Loasole 1 FEEDWATER Code Required Exam Volume     &#xf7;J 59,12 Sq, In, 0* L-Wave Exam Volume  -   31.12 Sq, In, 45' T-Scn Exam Volume-       47.77 Sq, In, 60" T-Scan Exam Volume   550,16 Sq, In, o ~
I-rTl

LasacWe 1 FEEPWATER Code Required Exam Volume    59.12 Sq. In, 45* P-Scan Exam Volume - 37 ,90 Sq, In.
60* P-Scan Exam Volume 47,15 Sq, In, 45Q9 I-I m
C-)

Lasctte 1 r-Ir-rTn\ I ATI--F)
Er CLUW H I LR\
Cocde Required Exam Volume - 26,13 Sq. In, 70&deg; T-Scan Exam Volume - 11.75 Sq, In, 70* P-Scan Exam Volume 8,25 Sq, In, 70&deg;T

NoziR(3)
GOD-SL6C.xls LaSalle 1                                                                                                                               09/18/00 N4 FEED WA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD             17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                           INDEX INDEX   STEP     RADIAL DISTANCE   AGATE BE GATE      C GATE FIXTURE CPU CH      TYPE   usec           X         Y      DEG  INCHES  INCHES     START    STOP   STOP   START STOP  STOP     ANGLE ANGLE 4     0,0*      B     3.66        0.00      0,00      0.8'   0.501   0.150      0       19.74    91    47     79    56 1     0.0&deg;     W     3.66         0.00      0.00      0.8'   0.320   0:150      0       6.36     91     -      -    56        -
2    45.0'      T    13.26        3.00      0.00      0.8*   0.418   0.150      0       13.61   235                  -      7.2'   -7.2' 3    60.0&deg;      T    14.15       -3,00      0.00      0.8&deg;   0.501   0.150      0       19.74   328                       354.0'   6.0' 2    45.0'     P1    13.26        3.00      0.00      0.8'   0.341   0.150      0        7.94   235                       300.5'  59.5'     (ccw) 3    60.0'    P1     14.15       -3.00      0.00      0.8&deg;   0.383   0,150      0       10.97   328                       295.6'  64.4*     (ccw) 2    45.0'    P2     13.26        3.00      0.00      0.8'   0.341   0.150      0        7.94   235                        78.1'  -78.1'    (cw) 3    60.0'    P2     14.15       -3.00      0.00      0.8'   0.383   0.150      0       10.97   328                        47.8'  -47.8'    (cw)
I 1/17/2002                                                                    Page I                                                              3:08 PM

Nou 10
                                                                                                                         *._=
GOD-SL6C.xls LaSalle I                                                                                                                                   09/18/00 N4 FEED WA TER GERIS-2000 NOZZLE- TO- VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                 127 WALL                 6.69 WELD RAD            17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                         INDEX INDEX   STEP       RADIAL DISTANCE  AGATE BE GATE     C GATE       FIXTURE CPU CH       TYPE   usec          X          Y     DEG  INCHES  INCHES       START    STOP  STOP   START STOP STOP           ANGLE ANGLE 1     70.0"     T      12.00      0.00       0.00     0.8*   0.387   0.150        0      11.27    54                             00      0.0    (ccw 2     70.0"     P1     12.00      3.00       0.00     0.8"   0.316   0.150        0       6.10    54                            287,5"  72.5"    cw 3     70,0*     P2     12.00      -3.00      0.00     0.8*   0.316   0.150        0       6.10    54                   -72.5"           -72.5"  (cw)
'-I 1/17/2002                                                                      Page 1                                                                  3:10 PM

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                      REPORT NO: 1R9-028 PROJECT              LaSalle Unit 1 - L1 R09 WELD ID:             LCS-1-N4E SYSTEM:              RPV- FEEDWATER INITIAL CALIBRATION ID:                          NOZIN1, 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4D.1, N4E.1, N4F.1, N4E.70RL.1, N4F.70RL.1 DATA SHEETS:                                     n4e.tl.1, n4e.tl.2, n4e.tl.3, n4e.tL.4, n4e.pl.1, n4e.p2.1, n4e.70rl.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              N/A
    ,EXAMINERS:,,                                     J. Kent Montgomery, Lv II, Mark Hilborn, Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1.150 Revision 1 (Alternative Method).
Automated 00, 2.25 L-Wave; 450 and 60* Shear 1.0 MHz and 70&deg; RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Initial calibrations for the 0&deg;, 450 and 60* Shear automated examinations were performed on code vessel block - SIN -
01-91-03. Calibration for the 700 RL automated examinations were performed on GENE sizing block, S/N -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 00 reference is located 900 CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0&deg; Base Metal                  - Geometry - Clad Noise, Non-Relevant Reflector 450 Transverse                 - Geometry - Clad Noise, Non-Relevant Reflector 600 Transverse                 - Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle Bore 450 Parallel                   - Geometry - Clad Noise, Entry Surface Noise 600 Parallel                   - Entry Surface Noise, Geometry - Clad Noise, Non-Relevant Reflector 70&deg; Transverse                 - Entry Surface Noise, Non-Relevant Reflector 70&deg; Parallel                   - Entry Surface Noise These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded one (1) indication with the 450 Tranverse search unit over 20% DAC which was found to be acceptable.
No other indications requiring evaluation according to ASME B&PV Code Section Xl or USNRC Reg Guide 1.150 Revision I (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 00,450 and 600 UT Coverage = 72.3%. Credit for the 450/600 near field taken with the 70&deg;.
Automated 70* Near Surface UT Coverage = 44.7%
Previous data was reviewed prior to the examination, changes are noted below.
The GERIS 2000 Automated system records the complete RF data during scanning, it also utilizes search units with lower frequency elements and improved ultrasonic coupling. The GERIS 2000 Automated System has shown that with its improvements in examination techniques, indications have better reflectivity with a 1 MHz search unit over a 2.25 MHz.,
which could explain why this indication was not recorded during the prior manual inspection.
II LA SALLE SUMNV.DOC                                                                                                      R cl PAGE      1   OF  32

LaSalle Unit I N4E Jan-02 CODE CROSS-SECTIONAL AREA                                         TOTAL CODE COVERAGE Area Scanned               % of Area Scanned        Degrees Scanned                    % Scanned 0  Area Inch 2         Auto           Manual          Auto        Manual      Auto          Manual           Auto         Manual 0
    &deg; WELD METAL   N     59.12            31.12             0.0          52.6           0.0      360.0            0.0           52.6           0.0 450 T-SCAN N     59.12            47.77             0.0          80.8           0.0      360.0            0.0           80.8           0.0 60' T-SCAN N     59.12            50.16             0.0          84.8           0.0      360.0            0.0           84.8           0.0 N     59.12              0.0             0.0           0.0           0.0       0.0             0.0            0.0           0.0 45" P-SCAN CW    N     59.12            37.90             0.0          64.1           0.0      360.0            0.0           64.1           0.0 600 P-SCAN CW    N     59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 450 P-SCAN CCW     N     59.12            37.90             0.0          64.1           0.0      360.0            0.0           64.1           0.0 600 P-SCAN CCW     N     59.12            47.15             0.0          79.8           0.0      360.0            0.0           79.8           0.0 72.3           0.0 Total 0&deg;, 45&deg; and 600 Coverage =       72.3 700 T-SCAN  N     21.13            11.75             0.0          55.6           0.0      360.0            0.0           55.6 70' P-SCAN CW   N     21.13             8.28             0.0                                                                                0,0 39.2           0.0      360.0            0.0           39.2 0.0 70&deg; P-SCAN CCW    N     21.13             8.28             0.0          39.2           0.0      360.0            0.0           392            AN 44.7           0_0 Total 700 Coverage =      44.7 COMMENTS:
Automated UT scans were limited due to the nozzle radius.
Credit for the initial 114" of material in code coverage taken with the 70&deg; 1 02/29/01

2 700&deg;               0 1800 H4-Thermocouptes T-Scan0 Start     o lu-            80 Stop

Lascde 1 FEEDWATER 600 T-Scan Exam Volume 50,16 Sq, In, 60&deg; T-Scan Exam Limited to 16,05" from 1080 CCW to 800 'due to thermocouples on vessel wall 600 T-Scan Exam Volume was not limited 16.05' I
I I
1
-~  T) c-i,.-
7.
IN (1.

LcasscLRe 1 FEEDWATER Codie Required Exam Volume - 59.12 Sq. In, 0&deg; L-W ve Exam Volume - 31.12 So. In, 45* T-Scan Exam Volume - 47.77 Sq.
60&deg; T-Scon Exam Volume 50,16 Sq, In,

LascWte 1 FEEDWATER
* Code Required Exam Volume - 59.12 Sq, In, 45" P-Scan Exam Volume - 37.90 Sq. In, 60&deg; P-Sccin Exom Volume 47,15 So, In,

Lasacle 1 FEEDWATER Code Required Exam Volume - 26.13 Sq, In, 700 T-Scan Exam Volume - 11.75 Sq. In, 700 P-Scan Exam Volrume 8,25 Sq. In.
70&deg;T

Noz,_IR(3)
GOD-SL6C.xIs LaSalle 1                                                                                                                                   09/18/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                   127 WALL                   6.69 WELD RAD              17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                          INDEX INDEX   STEP       RADIAL DISTANCE   AGATE  BE GATE      C GATE FIXTURE CPU CH      TYPE  usec          X          Y      DEG  INCHES  INCHES      START     STOP   STOP    START STOP  STOP     ANGLE ANGLE 4      0.0"      B     3.66       0.00       0.00      0.80   0.501    0.150      0       19.74      91    47     79    56 1     0.00     W      3.66       0.00       0.00      0.8"   0.320    0.150      0        6.36      91     -      -    56        -
2    45.0&deg;      T    13.26       3.00       0.00      0.8&deg;   0.418  . 0.150      0       13.61     235                  -      7.22  -7.2' 3    60.00      T    14.15       -3.00      0.00      0.8"   0.501    0.150      0       19.74     328                       354.0'   6.0&deg; 2    45.0'     P1    13.26       3.00       0.00      0.8'   0.341    0.150      0        7.94    *235                       300.5'  59.5'    (ccw) 3    60.0'     P1    14,15       -3.00      0.00      0.8"   0.383    0.150      0       10.97     328                       295.6'  64.4'    (ccw) 2    45.0"     P2    13.26       3.00       0.00      0.8&deg;   0.341    0.150      0        7.94     235                        781&deg;   -78.1'    (cw) 3    60.0'     P2    14.15       -3.00      0.00      0.8'   0.383    0.150      0        10.97    328                        47,80  -47.8'    (cw) 1117/2002                                                                     Page I                                                                3:08 PM

Noi i0 GOD-SL6C.xls LaSalle I                                                                                                                             09118/00 N4 FEEDWA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                 127 WALL                 6.69 WELD RAD            1725 ODBR                 , 4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                         INDEX INDEX   STEP       RADIAL DISTANCE  AGATE BE GATE     C GATE FIXTURE CPU CH     TYPE   usec          X          Y     DEG  INCHES  INCHES      START     STOP  STOP   START STOP STOP     ANGLE ANGLE 1     70.0&deg;     T     12.00       0.00      0.00     0.8"   0.387   0.150        0      11.27    54                        0.0&deg;   0,0" 2    70.0*     P1     12.00       3.00      0.00     0.8&deg;   0.316   0.150        0       6.10    54                      287.50  72.5&deg;   (ccw) 3     70.00    P2     12.00      -3.00      0.00     0.8"   0.316   0.150        0       6.10    54                       72.50  -72.5'  (cw)
U, 1/17/2002                                                                     Page 1                                                           3:10 PM

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                     REPORT NO: 1R9-029 PROJECT              LaSalle Unit 1 - L1RO9 WELD ID:             LCS-1-N4F SYSTEM:              RPV - FEEDWATER INITIAL CALIBRATION ID:                          NOZ.IN.1, 70RL.IN.1 CALIBRATION VERIFICATIONS:                       N4F.1, N4A.1, N4F.70RL.1, N4A.70RL.1 DATA SHEETS:                                     n4f.tl.2, n4f.pl.2, n4f.p2.1, n4f.70r1.1 FINAL CALIBRATION ID:                            SEE 

==SUMMARY==
SECTION BELOW MANUAL CALIBRATION:                              N/A E.MINERS:....                                    J. Kent Montgomery, Lv II, Mark Hilborn Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, Category B-D welds and USNRC Reg Guide 1. 150 Revision 1 (Alternative Method).
Automated 0*, 2.25 L-Wave; 450 and 60&deg; Shear 1.0 MHz and 70&deg; RL 2.0 MHz Transverse and Parallel scans were performed in accordance with procedure GE-UT-702 Version 2.
Initial calibrations for the 0&deg;, 45* and 60' Shear automated examinations were performed on code vessel block - SIN -
01-91-03. Calibration for the 70* RL automated examinations were performed on GENE sizing block, S/N -CAL-DPTH-60 ( Refer to G2K-CAL-1 Initial Calibration Summary Sheet).
For final automated calibrations and linearities, refer to Calibration Summary Sheet - G2K-CAL-3.
The GERIS 2000 OD automated UT system 00 reference is located 900 CW of nozzle TDC.
The GERIS 2000 OD system recorded the following non-relevant indications:
0&deg; Weld Metal                  - Geometry - Clad Noise, Non-Relevant Reflector 450 Transverse                 - Geometry - Clad Noise, Non-Relevant Reflector 560 Transverse               - Geometry - Clad Noise, Non-Relevant Reflector, Geometry - Nozzle Bore 456 Parallel                   - Geometry - Clad Noise 60' Parallel                   - Entry Surface Noise, Geometry - Clad Noise 700 Transverse                 - Entry Surface Noise, Non-Relevant Reflector 700 Parallel                   - Entry Surface Noise, Non-Relevant Reflector These non-relevant indications were flagged and excluded from the final report.
The GERIS 2000 OD system recorded one (1) indication with the 700 Tranverse search unit over 20% DAC which was found to be acceptable.
No other indications requiring evaluation according to ASME B&PV Code Section Xl or USNRC Reg Guide 1.150 Revision 1 (Alternative Method) were recorded.
Due to nozzle configuration it is not feasible to examine 100% of the ASME Code required volume.
Automated 0*,450 and 600 UT Coverage = 72.3%. Credit for the 450/600 near field taken with the 70'.
Automated 700 Near Surface UT Coverage = 44.7%
Previous data was reviewed prior to the examination, changes are noted below.
There was no previous 70* Near Surface data to review or compare.
   &#xfd;REPARED BY              DATE        RE"A                  DATE  j uBY                  DATE  ANI[REVIEW           DATE SUMNV.DC                                                                                                     LA SALLE I "V-L

LaSalle Unit I N4F Jan-02 CODE CROSS-SECTIONAL AREA                                        TOTAL CODE COVERAGE 2
6.)
Area Scanned               % of Area Scanned        Degrees Scanned                    % Scanned wo
                        .0 Area Inch2           Auto          Manual          Auto        Manual      Auto          Manual           Auto         Manual 0OWELD METAL     N         59.12             31.12           0.0            52.6          0.0      360.0            0.0           52.6           0.0 450 T-SCAN N         59.12             47.77            0.0           80.8          0.0      360.0            0.0           80.8           0.0 600 T-SCAN N         59.12             50.16            0.0           84.8          0.0      360.0            0.0           84.8           0.0 N         59.12              0.0             0.0           0.0           0.0       0.0             0.0            0.0           0.0 450 P-SCAN CW    N         59.12             37.90            0.0           64.1          0.0      360.0            0.0           64.1           0.0 600 P-SCAN CW    N         59.12             47.15            0.0           79.8          0.0      360.0            0.0           79.8           0.0 450 P-SCAN CCW     N         59.12             37.90           0.0           64.1           0.0      360.0            0.0           64.1           0.0 60" P-SCAN COW     N         59.12             47.15           0.0           .79.8          0.0      360.0            0.0           79.8           0.0 72.3           0.0 Total 0&deg;, 450 and 600 Coverage =       72.3 700 T-SCAN  N 21.13             11.75           0.0            55.6          0.0      360.0            0.0           55.6           0.0 70' P-SCAN CW   N         21.13             8.28            0.0           39.2           0.0      360.0            0.0           39.2           0.0 700 P-SCAN CCW    N         21.13             8.28            0.0            39.2          0.0      360.0            0.0           39.2           0.0 44.7           0.0 Total 700 Coverage =      44.7 o -;
COMMENTS:
l~utomatea U I scans were limirea aue to me nozzle radius.
Credit for the initial 1/4" of material in code coverage taken with the 70&deg;                                                    I rlO/*Qin4

LascW~e 1 FEEDWATER V
Code Required Exam Volume  -. 59.12 Sq, In, 0* L-Wave Exam Volume -  31.12 Sq, In, 45&deg; T-Scan Exam Volume - 47.77 Sq, In, 60&deg; T-Scan Exam Volume 50,16 Sq, In, 1/

Lasole 1 FEEDWATER Code Required Exam Volume -* 26,13 Sq. In, 70&deg; T-Scan Exam Volume - 11.75 Sq. In, 70&deg; P-Scan Exam Volume 8,25 So, In, I
70&deg;T

Noz- ri(3)
GOD-SL6C.xls LaSalle 1                                                                                                                                  09/18/00 N4 FEED WA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD             17.25 ODBR                     4 TYPE                  F    (F-FLANGE OR B-BARREL)
Delay                          INDEX INDEX   STEP      RADIAL DISTANCE   AGATE  BE GATE      C GATE FIXTURE CPU CH     TYPE   usec           X         Y      DEG  INCHES  INCHES     START     STOP   STOP    START STOP  STOP     ANGLE ANGLE 4     0.0'      B     3.66        0.00      0.00      0,8'   0.501   0,150      0       19.74     91     47     79    56 1     0.0*     W      3.66        0.00      0.00      0.8&deg;   0.320   0.150      0        6,36     91      -      -    56        -
2    45.0"      T    13.26        3.00      0,00      0.8"   0.418   0.150      0        13.61    235                  -      7.20   -7.2" 3    60.00      T    14.15       -3.00      0.00      0.8    0.501   0.150      0        19.74    328                  -    354.00    6.0&deg; 2    45,0*     P1    13.26        3.00      0.00      0.8"   0.341   0.150      0        7.94     235                  -    300.50  59.50     (ccw) 3    60,00     P1    14.15       -3.00      0.00      0.8"   0.383   0.150      0        10.97    328                  -    295.60  64.4"     (ccw) 2    45.00     P2    13.26        3.00      0.00      0.8&deg;   0.341   0.150      0        7.94     235                  -     78.1   -78.1     (cw) 3    60.00     P2    14.15       -3.00      0.00      0.81   0.383   0.150      0        10.97    328                  -     47.8*  -47.8-    (cw) 1/17/2002                                                                    Page 1

NoZ , i0 GOD-SL6C.xls LaSalle I                                                                                                                            09/18/00 N4 FEED WA TER GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   25 VSLIR                  127 WALL                  6.69 WELD RAD            17.25 ODBR                     4 TYPE                 F     (F-FLANGE OR B-BARREL)
Delay                         INDEX INDEX   STEP      RADIAL DISTANCE  AGATE BE GATE     C GATE FIXTURE CPU CH     TYPE   usec          X         Y      DEG  INCHES  INCHES       START   STOP  STOP   START STOP STOP     ANGLE ANGLE 1     70.0'     T     12.00      0.00       0.00     0.8&deg;   0.387   0.150         0    11.27    54                       0.0&deg;    0,0&deg; 2     70.0&deg;    P1     12.00      3.00       0.00     0.8'   0,316   0.150         0     6.10    54                      287.5&deg;  72.5&deg;   (ccw) 3     70&#xfd;0&deg;    P2     12,00      -3.00      0.00     0.8&deg;   0.316   0.150          0    6.10    54                       72.5*  -725&deg;   (cw) 1/17/2002                                                                     Page 1                                                           &#xfd;. A^ - -

Report No.:
G GE NUCLEAR ENERGY EXAMINATION 

==SUMMARY==
SHEET                                           1R9-136 Site and Unit:                       LaSalle                        Component ID:                        IRH-HXI B-08A Outage:                LI R09                                                                     I Lun System:      RHR        ASME Cat.:        C-C      ASME Item              C3.10           Aug Requirements:             N/A Exams Performed      Data Sheet        Cal Sheet          Procedure          Calibration Block      Examination   Cert Level      Date Personnel N/A            MT-001              N/A          MT-EXLN-102                  N/A            JudithOusley    II         01/11/2002 Examination Results:
During the magnetic particle examination of the above referenced weld, no indications were recorded.
76% of the code required surface area was examined.
This examination meets the requirements of ASME Section Xl, 1989 Edition, no Addenda.
Examination results were comparedto data report             D579       from        1989     outage with    E    No Change These examinations were perfornedunder Work Order:              99270178                                    0    Change This Summary and the following data sheets have been reviewed and accepted by thp following personnel:
                                ",/-/3-l.                       ( ;< z'                -wP:                                    868
__-/3-         __      ---    /.       '       T*                      J/*-*   i    Dose:      N/A     mr.
Prpaed.,                       Level:        Date:    Utility Reviewed By:      /

==Title:==
Date:
Reviewed By:                   Level:        Date:    ANII Reviewed By:

==Title:==
Date:        Page    1 of     3

Weld No.:   IRH-HXIB-08A                                  Configuration:      I LuO Drawing:     GEL-1104                                     System:
Procedure No.:     MT-EXLN-102                       Version / Revision Material:                   Surface Condition:                 Item:
Carbon Steel                  Ground                           Weld. Final Magnetizing Apparatus                                                         Black LighIt Mfg:           ParkerResearch     Yoke Calibration: AC - 10 lb. Lift                                Model           Serial Number Model:         Probe B300                                                          Blacklight    N/A             NIA 8164               Yoke Spacing:         6.                         Light Meter   N/A             N/A Serial No.
Thermometer:       218052                   Surface Tern perature:           60' F Technique                                Examination Medium                                 Blacklight Intensity Magnetization: AC                   Magnetic Particles:      Dry                                                 N/A Biacklight Intensity:
Technique:     Continuous                Magnaflux              8A Red            93A045 Manufacturer:       Particle Type:      Batch No LI        01/1112002 Level     Date e      a-t3-oz-Level     Date Page     ,        of

GE Inspection Services GE Ispetio $erlIRH-HXIB4-A,9A Was           ce            & I OA
/

Q            GE NUCLEAR ENERGY UT EXAMINA TION 

==SUMMARY==
SHEET                                  Summary No;           P,11 -025 PROJECT            LaSaife Unit 1. L I R I WELD ID:           GEL- O09-AG 73p Hd to F'aigje SYSTEM:            RFV CALIBRATION ID:             ,N&#xfd;A Manual DATA:                UT-021,022,023, and 024 OPERATORS:                  S h,-kkon Lv Vr,T Girider Ultrasornic examination results were acceprable to the requirements of AWME R&PV Codie Sctkin XI, 1989 Edilfon no Acdenda also Section x)I, i95 Edition wth the 199A6/ddenda as modified by the PFD. progrm description arnd !he Federal Reqsler, Pail 1;, Nuclear Reguiatoiy Ccrrmission, 10 CF&sect;R Part ,O fotoCategory B-A R.(.adcr Pres55ste Vessel ?RPV)
Assembly Welds.
Manual transverse and paralle! scans were oerfor-med frcm'the vessel 00)surface in 3czordance 'with procedure GE-UT- 300 V 10. using 601R9L search units.
Manual parallel scanning was iestficted due ro the Flarge tc weld confiqLrat0on The manual exams recorded no indications, Pre-vous data was (viewed     with no significant changes.
Manual UT C:rn"s* e coveraqe = 49c Magnetic Particle examination was performed in acccrdarinc, with procedure GE. MT-100 V'6. data ,le'ts - MT,006 and MT.-O7O T.tere  were no recordatle indicallis 1,I% of the required area was exammed
                                                                                                        ,i 7'f/
                                                                                                            *1 YA46V        &#xfd;Af-REVIE WED 9Y                CA TE I UTILITY REVIEW        OATE#1/2  ANI EIE                 ATE La Sile U, t      Ri 1                                                ae/c Page.-I      D&#xfd;  '?

cb                                                                                                                                        R~portNo. 1Ri~-G2~
Report No, I R 11" -025 LaSaile Unit-1 GEL- 1009-AG Spring 2006 CODE CROSS-SECTIONAL AREA                              TOTAL CODE COVERAGE Percent               -
Weld Length =  791.      Required Exam     Area Scanned              of Area            Weld Length              Porcent
            &#xa3;4               Exam Volume z   22.2        Area Sq. In.        Manual                Manual                  Manual              Manual 60' NS T-Scar.         A            7.9                ".9                 356%                    3955                . ./
60; S6 T-Scan          A            1                   11                 49.5%                   395.5               124%
I'           60- S4 T-Scan          A            3.3                13.                 14.9%       "           3G55 60' NS P-Scan          A            79                T4                   33 3%                   395.5                8.3%,"
60* S6 P-S&an          A            11                104                  468%                    395.5               11.7%
60' S4 P-Scan          A            3.3                3.                  14 0%                   395 5                3 5t 60 NS T-Scan                __'_.                           ..                   ........                              _ _
60" S6 T-Scan                                 . .      .     . ....        .
F3'0 " 4T-Scan          -   ...                                     L,                   I.     .             eI 60'  NS  P-Scan      -
60' N6 P-Scan                                          .. . .       .. .   ._
60'8*P-Scan                 _                              ..... .  .      ....
Comen~    A- ~sm~dacessbl wed enghfrm        1O~cw o     6O       ?       :,~L &     Jlm                              V/.
                                                                                                   % Total Composite Coverage =                  49%
0 1~~                 B - P-Scan restriced due to weld to flange configuraton.
0 N*nte --IRL-tncjfl,9 methcos may affect calculated vaiies,

(
* LaSalle Unit 1 Flange to Top Head 6r60 NS Exam Volume = 7.9 Sq. In.
60" FV S6 Exam Volume = 11.0 Sq. In.
60 6o     V S4 Exam Volume = 3.3 Sq. In.
60Nr 1S T-Scan achieved   = 7.9 Sq. In.
60   F'V S6 T-Scan achieved = 11.0 Sq. in.
60r FV S4 T-Scan achieved = 3.3 Sq. In.
60   NS P-Scan achieved    = 7.4 Sq. In.
60" FV S6 P-Scan achieved = 10.4 Sq. In.
60r FV S4 P-Scan achieved = 3.1 Sq. In.
1.6 WT                WT           3.0 V                              '

GE NuclearEnergy                                  MAGNETIC PARTICLE EXAMINATION REPORT Site: LaSalle Station                   Unit: 1           Project: LIRII                        Report Number:                1RII-025 Sheet No.:                   MT-006 Weld No.:    GEL-1009-AG                                         Configuration:      Top Head - Flanme Drawing:     GEL-1009                                            System:             RPV Procedure No.:         GE-MT-100                         Version I Revision:          V6            DRR:                  N/A Material:                       Surface Condition:                    Item:
CarbonSteel                     Cleaned                               Weld - Final Magnetizing Apparatus                                                               Black Light Mfg:               ParkerResearch       Yoke Calibration: 2015106                                              Model            Serial Number Model:             B-300                                                                    Blacklight:    N/A                N/A Serial No.        5522                  Yoke Spacing:          3"-6"                        Light Meter:   N/A                N/A Thermometer:          246434                      Surface Temperature:              87&deg; F Technique                                    Examination Medium                                        Blacklight Intensity Magnetization: AC                        Magnetic Particles:          Dry                                                    N/A Technique:        Continuous              ParkerResearch                  RP-6             11793                     Blacklight Intensity:
Manufacturer           Particle Type:      Batch No.:
Indication Number                                             

== Description:==
Resuls:
                                    --2_
                                       -R
                                               ---                                                                             --          I Comments:
Inspected from 1800 to 2700 Azimuth.
No recordable indications.
Clay Suhler                         II   2/2200             Utility Review                                Date .
Initia E/ainer                 Level     Date GE Review                       Level     De                 ANII Review                                    Date           Page       *;     of 7

GE NuclearEnergy                               MAGNETIC PARTICLE EXAMINATION REPORT Site: LaSalle Station                  Unit: I         Project:      LIR1I                  Report Number:               IRII-025 Sheet No.:                   MT-007 Weld No.:    GEL-1009-AG                                      Configuration:       Too Head- Flange Drawing:     GEL-1009                                         System:              RPV Procedure No.:        GE-MT-100                        Version I Revision:          V6           DRR:                N/A Material:                      Surface Condition:                  Item:
CarbonSteel                    Cleaned                             Weld- Final Magnetizing Apparatus                                                            Black Light Mfg:             ParkerResearch       Yoke Calibration: 2115/06                                             Model           Serial Number Model:           B-300                                                                  Blacklight:     N/A              N/A Serial No.       8164                 Yoke Spacing:         3""                         Light Meter:    N/A              N/A Thermometer:         246434                     Surface Temperature:              67&deg; F Technique                                   Examination Medium                                      Blacklight Intensity Magnetization: AC                      Magnetic Particles:        Dry                                                    N/A Technique:       Continuous              ParkerResearch                RP-6             11793                    Blacklight Intensity:
Manufacturer          Particle Type:      Batch No.:
Comments:
Inspected from 270&deg; to 360&deg; Azimuth.
No recordable indications.
Alan Kel/2v                                              Utility.Revie.                                 Date Initial                        Level     Date                                              -
GE Review                       Level     Date             ANII Review                                    Date         Page       7       of

       ~GE           NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                  Summary No: 1R 11-007 PROJECT           LaSalle Unit 1, L1RlI WELD ID:          GEL-1006-AJ - Bottom Hd. Circumferential Weld SYSTEM:           RPV CALIBRATION ID:             N/A MANUAL DATA:                UT-061, 062, 063, 064 OPERATORS:                  W. Reid Lv II, S. Snyder Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, and Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10; using 60' RL search units.
Manual scanning was performed from the top side only, T-scans and P-scans were restricted due to the RPV vessel skirt.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage      = 19 %
REPARED BY            DATE     REVIEWED BY           DATE    UTILITY REVIEW7     DATE    ANII REVIEW            DATE T Level:                       UT Level:
LaSalle Unit-i, Li Ri 1, 2006                                                                                        ,
Page 1 of*_j

                                                                                                                                     ,!w   /* 0'16.
Report No. 1R11-9ft5-LaSalle Unit-1                                                        0o07 GEL-1006-AJ Bott. Hd. Circ. Weld Spring 2006 CODE CROSS-SECTIONAL AREA                        TOTAL CODE COVERAGE Percent Weld Length = 657.3      Required Exam     Area Scanned           of Area       Weld Length         Percent Exam Volume = 36.5          Area Sq. In.       Manual              Manual          Manual             Manual 600 NS T-Scan        A            11.3             -2.3                6.3%           328.6               1.6%
60&deg; S6 T-Scan        A            19.9             13.3               36.4%           328.6              9.1%
600 S4 T-Scan        A            5.3      +        5.2               14.2%           328.6              3.6%
600 NS P-Scan         A           11.3              1.6                4.4%           328.6               1.1%
60" S6 P-Scan        A            19.9              4.1               11.2%           328.6              2.8%
600 S4 P-Scan        A            5.3               1.1                3.0%           328.6              0.8%
600 NS T-Scan 600 S6 T-Scan 600 S4 T-Scan 60' NS P-Scan 600 S6 P-Scan 600 S4 P-Scan iIJ                         _
                                                                                    % Total Composite Coverage =          19%
Comments:   A - Examined accessible weld length from 1800 cw to 3600 top side only, T-scans and P-scans were limited due to the RPV vessel skirt.
Note - Rounding methods may affect calculated values.

600 NS Exam Volume= 11.3 Sq. In.                LaSalle Unit 1 60' FV S6 Exam Volume = 19.9 Sq. In.
600 FV S4 Exam Volume = 5.3 Sq. In.             Bottom Head (AJ) 600 NS T-Scan achieved = 2.3 Sq. In.            Circ. Weld 600 FV S6 T-Scan achieved = 13.3 Sq. In.
60' FV S4 T-Scan achieved = 5.2 Sq. In.
60' NS P-Scan achieved = 1.6 Sq. In.
600 FV S6 P-Scan achieved = 4.1 Sq. In.
60&deg; FV S4 P-Scan achieved = 1.1 Sq. In.
600TIP 60 0T                    I 2~)

0GE                 NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                 REPORT NO: 1Rl1-003 PROJECT           LaSalle Unit 1 - L1Rl1 WELD ID:          LCS BG SYSTEM:           RPV INITIAL CALIBRATION ID:                     VES.91.1N.1       (L1RO9)
FINAL CALIBRATION ID:                       VES.91.OUT.1 (L1RO9)
GERIS DATA:                                 (See weld LCS-1-BG reports from L1RO9)
MANUAL CALIBRATION:                         N/A MANUAL DATA:                                N/A Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Automated 0', 2.25 MHz Weld and Base Metal, 45&deg;S, 1.0 MHz, 601L, 2.0 MHz and 70&deg;RL, 2.0 MHz Transverse and Parallel scans were performed per the requirements of procedure GE-UT-704 V4, in accordance with Appendix VIII.
Automated scanning was restricted on both sides of "BG" due to Instrumentation Nozzle N12-A.
These examinations were performed during the L1R09 outage in 2002 which did not permit single side coverage.
Reevaluation of this recorded data was performed in accordance with procedure GE-UT-704 V8 which is qualified for single sided access. The coverage was recalculated and resulted in an increase in coverage of 9.2%, taking the coverage from 66.1% to 75.3%
Automated UT Composite Coverage = 75.3%
GERIS 2000 Software Revision 5.26 was used for aquisition and analysis.
Li                                                                                                                   II LaSalle Unit 1, L1R11, 2006                                                                Page I of Z

Summary No.: lRll-003 LaSalle Unit-1 LCS-1 -BG ASpring                                                              2006 CODE CROSS-SECTIONAL AREA                           LENGTH CALCULATIONS Percent Weld Length = 109.38 Required Exam Area Scanned                   of Area          Weld Length     Percent N-Exam Volume = 52.69         Area Sq. In.           Auto              Auto                Auto         Auto 700 T-Scan          A           8.38                8.38            15.9%               83.88         6.1%
450 T-Scan          A          36.25               36.25            68.8%               83.88        26.4%
600 T-Scan          A           8.06                8,06            15.3%               64.63         4.5%
700 P-Scan          A           8.38                8.38            15.9%               83.88         6.1%
450 P-Scan          A          36.25               36.25            68.8%               83.88        26.4%
600 P-Scan          A           8.06                8.06            15.3%               64.63         4.5%
70' T-Scan 450 T-Scan 600 T-Scan          B           8.06               4.03              7.6%               19.25         0.7%
700 P-Scan 450 P-Scan 60&deg; P-Scan          B           8.06               4.03              7.6%               19.25         0.7%
70' T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan 600 P-Scan
                                                                                    -/o I otal G~omposit  koverage=    / b.3V Comments:   A - Examined accessible length. Weld length reduced by 3.0" due to the N12-A instrumentation nozzle.
B - Automated exam restricted due to the proximity of the N12-A nozzle pad.
Note - Rounding methods may affect calculated values.

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                    REPORT NO: 1R9-010 PROJECT            LaSalle Unit 1 - L1RO9 WELD ID:           LCS BG SYSTEM:            RPV INITIAL CALIBRATION ID:                       VES.9 1.IN. 1 CALIBRATION VERIFICATIONS:                    BM. 1 FINAL CALIBRATION ID:                         VES.91.OUT.1
: I*NGERIS
            *-   DATA:
A *Ib"IB'*TiON:
L                             bgr.1, N/A    bgr.2, bgl.1, bgl.6, bgl.7, bgl.8
       .MANUJAL tALIRATINNA MANUAL DATA:                                  N/A Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Automated 0', 2.25 MHz Weld and Base Metal, 45&deg;S, 1.0 MHz, 60 0L, 2.0 MHz and 70&deg;RL, 2.0 MHz Transverse and Parallel scans were performed per the requirements of procedure GE-UT-704 V4, in accordance with Appendix VIII.
The GERIS 2000 OD system recorded the following indications:
00 Weld Metal     - No Recordable Indications 450 Transverse     - No Recordable Indications 600  Transverse    - No Recordable Indications 700  Transverse    - No Recordable Indications 45&deg;  Parallel      - No Recordable Indications 600  Parallel      - No Recordable Indications 70'  Parallel      - No Recordable Indications Plate segregates on both sides of weld "BG" were observed.
Automated scanning was restricted on both sides of "BG" due to Instrumentation Nozzle N12-A.
Previous examination results were reviewed and there are no changes.
Automated UT Composite Coverage = 66.1%
GERIS 2000 Software Revision 5.26 was used for aquisition and analysis.
(       REPARED BY
      -ATE 0          7 REVI WED BY DATE      0 UTILITY REVIEW DATE ANII REVIEW DATE I
SUMNV.DOC                                                                                                 LA SALLE I K ("~I
                                                                                                                   /
PAC     It,

Y= 459.50 454I,683 BE Area Scanned Area not scanned on left side 40,5' Y= 390.00 N12-A Y= 349.50 34 2,2 5 Y= 332,25

Y= 464.00 454,63" BN Ar'ea Sca~nned N6-A Y= 378.00 N12-Ar Areoa not scanned on right side 47,75 342,25"

(                                                               LaSalle Unit-1 Weld BG Jan-02 CODE CROSS-SECTIONAL AREA                               TOTAL CODE COVERAGE Weld Length                          Area Scanned          % of Area Scanned  IWeld Length Scanned          % Scanned 112.38 2
0     Area Inch       Auto        Manual       Auto       Manual    Auto       Manual      Auto           Manual RIGHT SIDE 70: T-SCAN N/A         8.38         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 RIGHT SIDE 45 T-SCAN    N/A      36.25         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 RIGHT SIDE 60 T-SCAN    N/A       8.06         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 70RP-SCAN UP    N/A       8.38         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 450 P-SCAN UP   N/A      36.25         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 60&deg; P-SCAN UP N/A         8.06         0.00         0.00        0.0         0.0      0.0          0.0        0.0             0.0 Unrestricted Scans LEFT SIDE 70* T-SCAN   N/A       8.38         8.38         0.00       100.0        0.0      0.0          0.0        0.0             0.0 LEFT SIDE 45* T-SCAN   N/A      36.25        36.25         0.00       100.0        00       00           0.0        0.0             0.0 LEFT SIDE 60 T-SCAN    N/A       8.06         8.06         0.00       100,0        0.0      0.0          0.0        0.0             0.0 70* P-SCAN DOWN     N/A       8.38         8.38         0.00       100,0        0.0      0,0          0.0        0.0             0.0 45* P-SCAN DOWN     N/A      36.25        36.25         0.00       100.0        0.0      0.0          0.0        0.0             0.0 60* P-SCAN DOWN     N/A       806          8.06         0.00       100.0        0.0      0.0          0.0        0.0             0&#xfd;0 Restricted Scans RIGHT SIDE 70 T-SCAN     Y        8.38         8.38         0.00       100.0        0.0     76.63         0.0       10.8             0.0 RIGHT SIDE 45* T-SCAN    Y       36.25        36,25         0.00       100.0        0.0     76.63         0.0       46.9             0.0 RIGHT SIDE 60 T-SCAN     Y        8.06         8.06         0.00       100.0        0.0     76.63         0.0       10.4             0.0 70&deg; P-SCAN UP    Y        8.38         8.38         0.00       100.0        0.0     76.63         0,0       10.8             0.0 45&deg; P-SCAN UP    Y       36.25        36.25         0.00       100.0        0.0     76.63         0,0       46.9             0.0 60" P-SCAN UP    Y        8.06         8.06         0.00       100.0        0.0     76.63         0.0       10.4             0.0 Restricted Scans
(   LEFT SIDE 70 T-SCAN LEFT SIDE 45&deg; T-SCAN Y
Y 8.38 36.25 8.38 36.25 0.00 0.00 100.0 100.0 0.0 0.0 71.88 71.88 0.0 0.0 10.2 44.0 0.0 0.0 LEFT SIDE 60 T-SCAN     Y        8.06         8.06         0.00       100.0        0.0     71.88         00         9.8             0.0 70&deg; P-SCAN DOWN      Y        8.38         8.38         0.00       100.0        0.0     71.88         0.0       10.2             0.0 45&deg; P-SCAN DOWN      Y       36.25        36.25         0.00       100.0        0.0     71.88         0.0       44.0            0.0 60* P-SCAN DOWN      Y        8.06        8.06          0.00       100.0        0.0     71.88         0.0        9.8            0.0 Coverages    66.1            0.0 Total Composite Coverage         66.1 Comments:
Automated Scanning was restricted on both sides due to Instrumentation Nozzle N12-A Convfl1,. 4314 1121/*002 CovCalc As      112212002 LA SALLE IR&#xfd;              IA _ /

LaSalle 1 Shell Course 3 Required 45&deg; Exam Volume - 36.25 Sq In.
Required 600 Exam Volume - 8.06 Sq In.
Required 700 Exam Volume - 8.38 Sq In.
Right and Left Sides T(-I) - .?'
T(dol) - ?J37r

LaSalle  I Shell Course    3 Volume    - 8.06 Sq In.
Exam Required 600 p-Scan                    - 36,25 Sq In.
Exam    Volume Required 450 p-Scan 450 and 600 p-Scan
      . als-Tnow)- 1-37W

LaSalle 1 Shell Course 3 Required 70&deg; P-Scan Exam Volume - 8.38 Sq In.
I- T(-.) -7.37r
'ii

Vest, pk)
LaSalle I                                                                                 GOD-SL6C.xIs VESSEL SCANNING LIMITS                                                                    09/18/00 PDI                                       SHELL COURSE:           3 1 <-Normal Package Position              (1or 0)
PULSER OFFSET               0 counts               VSLIR        127 COUNTS/INCH                 1                      WALL        6.75 BE-gate          C-gate CH     Beam         TYPE     ROT     DELAY      X        Y     START     STOP   A-GATE START   STOP     STOP 6        0.        0          B       3.66    0.00     0.00     -19.09     5.58    76     47       91        -
1       0o        0          W       3.66    0.00     0.00      -5.58     5.58    76      -        -       64 2      45.        90         T       13.26    1.72    3.14     -14.61     3.86    237     -        -        -
3      600        90         T       14.15   -0.83    3.14     -18.26     6.41    188     -        -
4       450       180         P       13.26    3.27    0.00      -8.85     2.31    237     -        -
5       600       180          P      14.15    3.27    6.12      -8.85     2.31    188     -        -
7       700        90         T       12.00   0.00     6.12     -10.52     5.58    54      -        -
8       700       180          P      12.00    4.27    3.14      -9.85     1.31    54      -        -
1/25/2002                                                       Page I                                                   10: 14 AM

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                  REPORT NO: 1R11-004 PROJECT          LaSalle Unit 1 - Li R1 1 WELD ID:          LCS BH SYSTEM:          RPV INITIAL CALIBRATION ID:                    VES.91.IN.1       (Li R09)
FINAL CALIBRATION ID:                      VES.91.OUT.1 (L1RO9)
GERIS DATA:                                 (See weld LCS-1-BG reports from L1RO9)
MANUAL CALIBRATION:                        N/A MANUAL DATA:                                N/A Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Automated 0', 2.25 MHz Weld and Base Metal, 450S, 1.0 MHz, 60&deg;L, 2.0 MHz and 70&deg;RL, 2.0 MHz Transverse and Parallel scans were performed per the requirements of procedure GE-UT-704 V4, in accordance with Appendix VIII.
Automated scanning was restricted on both sides of "BH" due to Instrumentation Nozzle N6-A.
These examinations were performed during the L1R09 outage in 2002 which did not permit single side coverage.
Reevaluation of this recorded data was performed in accordance with procedure GE-UT-704 V8 which is qualified for single sided access. The coverage was recalculated and resulted in an increase in coverage of 6.6%, taking the coverage from 82.2% to 88.8%
Automated UT Composite Coverage = 88.8%
GERIS 2000Software Revision 5.26 was used for aquisition and analysis.
1P  EPARED BY                   REVIEWED BY                    UTILITY REVIEW              ANII REVIEW VATE Z-Z_-0,                    DATE 3/"S-o                    DATE                        DATE LaSalle Unit 1, LR1 1, 2006                                                                Page _tof _2

Summary No.: 1Ri 1-004 LaSalle Unit-1 LCS-1-BH Spring 2006 CODE CROSS-SECTIONAL AREA                       LENGTH CALCULATIONS Percent Weld Length = 87.5      Required Exam Area Scanned             of Area         Weld Length     Percent "X.
Exam Volume = 52.69        Area Sq. In.            Auto           Auto              Auto          Auto 700 T-Scan           A           8.38                8.38         15.9%              79.38         7.2%
450 T-Scan           A          36.25               36.25         68.8%              79.38        31.2%
60' T-Scan           A           8.06                8.06         15.3%              57.65         5.0%
700 P-Scan           A           8.38                8.38         15.9%              79.38         7.2%
450 P-Scan           A          36.25               36.25         68.8%              79.38        31.2%
600 P-Scan           A           8.06                8.06         15.3%              57.65         5.0%
700 T-Scan 450 T-Scan 600 T-Scan           B           8.06               4.03           7.6%              21.73         0.9%
700 P-Scan 450 P-Scan 60' P-Scan           B           8.06               4.03          7.6%               21.73         0.9%
70' T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan 600 P-Scan I otal Composite Coverage =   88.8d' Comments:   A - Examined accessible length. Weld length reduced by 25.23" due to N6-A nozzle cutout B - Automated exam restricted due to the proximity of the N6-A nozzle Note - Rounding methods may affect calculated values.

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                     REPORT NO: 1R9-011
(
PROJECT            LaSalle Unit 1 - Li R09 WELD ID:           LCS BH SYSTEM:            RPV INITIAL CALIBRATION ID:                        VES.9I.IN.1 CALIBRATION VERIFICATIONS:                     BM.1 FINAL CALIBRATION ID:                          VES.91.OUT.1 GERIS DATA:                                    bhr.3, bhr.4, bhr.5, bhr.6, bhr.7, bhl.1, bhl.2, bhl.3, bhl.4 MANUAL 6AIi6ATiON:
      '..                                             N/A MANUAL DATA:                                   N/A Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Automated 0&deg;, 2.25 MHz Weld and Base Metal, 450S, 1.0 MHz, 60 0L, 2.0 MHz and 70ORL, 2.0 MHz Transverse and Parallel scans were performed per the requirements of procedure GE-UT-704 V4, in accordance with Appendix VIII.
The GERIS 2000 OD system recorded the following indications:
00 Weld Metal     - No Recordable Indications 450 Transverse      - No Recordable Indications 60&deg; Transverse      - No Recordable Indications 700 Transverse     - (2) Indications Recorded - See Indication Data sheet - BH-001, BH-002 450 Parallel        - No Recordable Indications 600 Parallel        - No Recordable Indications 700 Parallel       - No Recordable Indications The two (2) indications recorded above were evaluated and found to be acceptable per the requirements of IWB-3000.
Plate segregates on both sides of weld "BH" were observed.
Automated scanning was restricted on the both sides of weld "BH" due to Nozzle N6-B.
Automated scanning was also limited at the top of weld "BH" due to the proximity of the thermocouple pads.
Previous examination 'results were reviewed and changes are noted. (see below)
The previous examination was performed with an earlier automated GERIS System which did not record the the RF data and only recorded reflectors over 20%.
The present GERIS 2000 Automated system records the complete RF data during scanning, it also utilizes new search units with lower frequency elements and improved ultrasonic coupling.
This examination is also in accordance with ASME Section XI Appendix VIII which is considered more critical of the examination volume, thus, more indications were recorded during this examination than the previous one.
This change in results is not considered to be indicative of changes in the condition of the weld or associated base material.
Automated UT Composite Coverage = 82.2%
GERIS 2000 Software Revision 5.26 was used for aquisition and analysis.
PREPARED BY                        REVIEV/ED BY               F=o UTILlT REV'I- W               ANII REVIEW ATE                             DATE Ln      2       ,          AEDATE                                      Z2-c Z i                                                        ,,,
SUMNVDOC                                                                                                       . L F

Y= 455,01 T/C PADS BH N1O                      Area Scanned Y= 398,00 Area due to N6-B Nozzte Ne-B N12-B AC~
Y= 332.50

Y= 464.75 00 T/C PADS BH NIO                             Area Scanned Y= 390.00 Area restricted   lue to N6-B Nozzte N6-B N12-B Y= 349.50 AC Y= 332,25

(                                                               LaSalle Unit-1 Weld BH Jan-02 CODE CROSS-SECTIONAL AREA                             TOTAL CODE COVERAGE T
Weld Length                         AreaScanned           %of Area Scanned IWeld Length Scanned          % Scanned 87.15 0    Area Inch 2
Auto       Manual       Auto      Manual    Auto       Manual      Auto        Manual Urwustrtted Svens RIGHT SIDE 701 T-SCAN      N      8.38         0.00         0.00        0.0        0.0     0.0          0.0        0.0           0.0 RIGHT SIDE 45 T-SCAN       N      36.25        0.00         0.00        0,0        0.0     0.0          0.0        0.0           0.0 RIGHT SIDE 60*T-SCAN       N      8.06         0.00         0.00         0.0       0.0     0.0          0.0        0.0           0.0 70&deg; P-SCAN UP      N      8.38         0.00         0.00        0.0        0.0     0.0          0.0        0.0           0.0 45' P-SCAN UP      N      36.25        0.00         0.00        0.0        0.0     0.0          00         0.0           0.0 60&deg; P-SCAN UP      N      8.06         0.00         0.00        0.0        0.0     0.0          0.0        0.0           0,0 Unrestricted Scans LEFT SIDE 70 T-SCAN       N      8.38         0.00         0.00        0.0        0.0     0.0          00         0.0           0.0 LEFT SIDE 45* T-SCAN      N      36.25        0.00         0.00        0.0        0.0     0.0          0.0        0.0           0.0 LEFT SIDE 60" T-SCAN      N      8.06         0.00         0.00        0.0        0.0     0.0          00         0.0           0.0 70&deg; P-SCAN DOWN        N      838          0.00         0.00        0.0        0.0     0.0          0.0        0.0           0,0 45&deg; P-SCAN DOWN        N      36.25        0.00         0.00        0.0        0.0     0.0          0.0        0.0           0.0 60&deg; P-SCAN DOWN        N      8.06         0.00         0.00        0.0        0.0     0.0          0,0        0.0           0.0 Restricted Scans RIGHT SIDE 70 T-SCAN       Y      8.38         8.38         0.00       100.0       0,0    71.38         0.0        13.0          0,0 RIGHT SIDE 45&deg; T-SCAN      Y      36.25        36.25        0,00       100.0       0.0    71.38         0.0       56.3           0.0 RIGHT SIDE 60 T-SCAN       Y      8.06         8.06         0.00       100.0       0.0    71.38         0.0        12.5          0,0 70&deg; P-SCAN UP      Y      8.38         8.38         0.00       1000        0.0    71.38         0.0        13.0          0.0 45' P-SCAN UP      Y      36.25        36.25        0.00       100.0       0.0    71.38         0.0       56.3           0.0 60&deg; P-SCAN UP      Y      8.06         8.06         0.00       100.0       0.0    71.38         0.0        12.5          0.0 Restricted Scans
(    LEFT SIDE 70' T-SCAN     Y       8.38         8.38         0.00       100.0       0,0    71.88         0.0       13.1          D.0 LEFT SIDE 45&deg; T-SCAN     Y      36.25        36.25         0.00       100.0       00     71.88         0,0       56.7          0.0 LEFT SIDE 60&deg; T-SCAN     Y       8.06         8.06         0.00       100.0       0.0    71.88         0.0       12.6          0.0 70 P-SCAN DOWN        Y       8.38         8.38         0,00       100,0       0.0    71.88         0.0       13.1          0.0 45* P-SCAN DOWN       Y      36.25        36.25         0.00       100.0       0.0    71.88         0.0       56.7          0.0 60&deg; P-SCAN DOWN       Y       8.06         8.06         0.00       100.0       0.0    71.88         0.0       12.6          0.0 Coveragel     82.2          0.0 Total Composite Coverage       82.2 Comments:
Weld length reduced 25.23" due to N6-B Nozzle cut-out Automated scanning was restricted on both sides of "SH" due to N6-8 Nozzle.
CovCalc~xls, 1/2212002 LA SALLE 1 RCI r'.A 7%       1r

LaSalle 1 Shell Course 3 Required 450 Exam Volume - 36.25 Sq In.
Required 600 Exam Volume - 8.06 Sq In.
Required 70' Exam Volume - 8.38 Sq In.
Right and Left Sides T(no) - 6.7V T(di) - 7.37V

LaSalle 1 Shell Course 3 Required 600 P-Scan Exam Volume - 8.06 Sq In.
Required 450 P-Scan Exam Volume - 36.25 Sq In.
T(on) - 0.75 T(dl) - ?.375"

LaSalle 1 Shell Course 3 Required 700 P-Scan Exam Volume - 8.38 Sq In.
T(n  - 6,715 T(dWO)7.315=

Vestpk)
LaSalle I                                                                                       GOD-SL6C.xls VESSEL SCANNING LIMITS                                                                          09/18/00 PD1                                         SHELL COURSE:             3 1 <--Normal Package Position              (1 or 0)
PULSER OFFSET                0 counts                VSLIR          127 COUNTS/INCH                  1                       WALL          6.75 BE-gate          C-gate CH      Beam        TYPE      ROT     DELAY       X        Y      START      STOP     A-GATE START   STOP     STOP 6         00        0           B      3.66     0.00     0.00      -19.09      5.58      76     47       91        -
1        0&deg;        0          W       3.66     0.00     0.00       -5.58      5.58      76      -        -       64 2       450       90           T      13.26     1.72-   3.14      -14.61       3.86     237     -        -        -
3       600       90           T      14.15    -0.83    3.14      -18.26       6.41     188     -        -        -
4        450       180          P      13.26     3.27    0.00       -8.85       2.31     237     -        -        -
5        60'       180          P      14.15     3.27    6.12       -8.85       2.31     188     -        -        -
7        70
* 90           T      12.00     0.00    6.12      -10.52       5,58     54      -        -        -
8        70*       180          P      12.00     427     3.14       -985         1.31    54      -        -        -
1/25/2002                                                         Page 1                                                       r&#xfd;).
Ip PhA

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                      Summary No: 1R 11-021 PROJECT            LaSalle Unit 1, L1R11 WELD ID:           GEL-1009-DR Top Hd Meridional SYSTEM:            RPV CALIBRATION ID:             N/A MANUAL DATA:                UT-036 and 37 OPERATORS:                  W. Reid Lv II, Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, and Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10; using 600 RL search units.
Manual scanning was restricted due to the top head lifting lug and top hd. flange.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage = 68 %
                                                                                                                       /
Ll                                                                                                                   ii LaSalle Unit-i, LR113,   2006 Page 1 of API;

Report No. 1R11-021 LaSalle Unit-1 GE-1009-DR Spring 2006 CODE CROSS-SECTIONAL AREA                   TOTAL CODE COVERAGE Percent Weld Length =      67.      Required Exam       Area Scanned    of Area       Weld Length     Percent Exam Volume =      23.3          Area Sq. In.       Manual       Manual           Manual       Manual 600 NS T-Scan          A                 5.5              5.5       23.6%              46          8.1%
60' S6 T-Scan          A                 14.4            14.4       61.8%              46         21.2%
60' S4 T-Scan          A                 3.4              3.4       14.6%              46          5,0%
600 NS P-Scan          A                 5.5              5.5       23.6%            46.0          8.1%
60* S6 P-Scan          A                 14.4            14.4       61.8%             46.0        21.2%
60' S4 P-Scan          A                 3.4              3.4       14.6%             36.0         3.9%
600 NS T-Scan 60' S6 T-Scan 600 S4 T-Scan          B                 3.4              1.7        7.3%              10          0.5%
60' NS P-Scan       __B___
600 S6 P-Scan 600 S4 P-Scan Commnts:A wed legth-Examnedaccesibl
                                                                                    % Total Composite Coverage =    68%
Comments:   A - Examined accessible weld length.
B - P-Scan restricted due to lifting lug and top hd. Flange.
Note - Rounding methods may affect calculated values.

Cn                                 LaSalle Unit 1 Closure Head Meridionals 60 NS Exam Volume = 5.5 Sq. In, 6*V W*    S6 Exam Volume = 14.4 Sq. In.
60' FV S4 Exam Volume = 3.4 Sq. in.
60' NS T-Scan achieved = 5.5 Sq In.
60* FV S6 T-Scan achieved = 14.4 Sq. In.
60WFV S4 T-Scan achieved = 3.4 Sq. In.
60: NS P-Scan achieved = 5.5 Sq. In.
60' FV S6 P-Scan achieved = 14.4 Sq. In.
60' FV S4 P-Scan achieved = 1.7 Sq. In.
607TIP        60TIP 607T    H-  3.0" -       60'T CD CD 0

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                      Summary No: 1R11-023 PROJECT           LaSalle Unit 1, LiRl1 WELD ID:          GEL-1009-DT Top Hd Meridional SYSTEM:           RPV CALIBRATION ID:             N/A MANUAL DATA:                UT-038 and 39 OPERATORS:                  W. Reid Lv II, Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, and Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10; using 600 RL search units.
Manual scanning was restricted due to the top head lifting lug and top hd. flange.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage = 68 %
P EPARED BY            DATE     REVIEWED BY           DATE      UTILITY REVIEW     DATE   ANII REVIEW          DATE UTLeveI: ~J                    UT Level:
LaSalle Unit-i, LIR11, 2006 Page 1 of _4

Report No. 1R11-023 LaSalle Unit-1 GE-1009-DT Spring 2006 CODE CROSS-SECTIONAL AREA                   TOTAL CODE COVERAGE Percent Weld Length =     67.      Required Exam       Area Scanned    of Area      Weld Length N          Exam Volume =      23.3        Area Sq. In.         Manual       Manual           Manual Percent Manual N        60' NS T-Scan          A               5.5              5.5         23.6%              46          8.1%
600 S6 T-Scan          A              14.4              14.4        61.8%              46         21.2%
600 S4 T-Scan          A               3.4              3.4         14.6%              46          5.0%
60' NS P-Scan          A               5.5              5.5         23.6%             46.0         8.1%
600 S6 P-Scan          A              14.4              14.4       61.8%              46.0        21.2%
600 S4 P-Scan          A               3.4              3.4         14.6%             36.0         3,9%
600 NS T-Scan 600 S6 T-Scan 60' S4 T-Scan          B              3.4               1.7         7.3%               10         0.5%
600 NS P-Scan 60' S6 P-Scan 60'  S4 P-Scan
                                                                                    % Total Composite Coverage =    68%
Comments: A - Examined accessible weld length.
B - P-Scan restricted due to lifting lug and top hd. Flange Note - Rounding methods may affect calculated values.

I-D*    *LaSalle                                                     Unit 1 CD       ,Closure                                                    Head Meridionals C        .60' A)*
60' NS Exam Volume = 5.5 Sq. In FV S6 Exam Volume =14.4 Sq. In.
60' FV S4 Exam Volume = 34 Sq. In.
60' NS T-Scan achieved = 5.5 Sq. In.
60' FV S6 T-Scan achieved = 14.4 Sq. In.
60' FV S4 T-Scan achieved = 3.4 Sq. In.
60' NS P-Scan achieved = 55 Sq In.
60' FV S6 P-Scan achieved = 14 4 Sq. In.
60WFV S4 P-Scan achieved = 1.7 Sq. In.
S11.6"0   P            60TIP 60 'T         I   3.0" 160'T CD

10, 0t  ManuaL scan area Manuat scanning restricted due to Uting [ug Iaj N
- &.~
36.00"  Manuat scan area
* GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1 R 11-028 PROJECT             LaSalle Unit 1, L1R11, 2006 WELD ID:            LCS-1-N2A SYSTEM:             Recirculation CALIBRATION ID:                       NOZIN EXAMINATION DATA:                     N2A-01 OPERATORS:                            C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V5, using 450 Shear wave, 600 RL, and 700 RL search units, supplemental 00 L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 450 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which bas been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
K Seven (7) relevant indications were recorded that were found to be acceptable" per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated Composite Coverage       = 83.1%.
REPARED BY              DATE     REVIEWED BY           DATE    UTILITY REVIEW        DATE    ANII REVIEW          DATE UT Level: :11:                    UT Level:
LaSalle Unit 1, Li R1 1, 2006                                                    Pagel1of         "-Z1

I-02 I'-
LaSalle 1 M
0 N2 Nozzle - Recirculation Inlet 70* Exam Volume = 11.6 Sq. In 45' Exam Volume = 51.4 Sq. In Inner 15%T Exam Volume (60'T & IRS) = 10.6 Sq. In 70' T-Scan achieved = 6.7 Sq. In 45* T-Scan achieved = 46.9 Sq. In 600 T-Scan achieved = 10.6 Sq. In T-Sca s 707T             45&deg;T             60&deg;T I               I                 I z-,

LaSalle 1 N2 Nozzle - Recirculation Inlet 700 Exam Volume = 11.6 Sq. In 450 Exam Volume = 51.4 Sq. In Inner 15%T Exam Volume (607T & IRS) = 10.6 Sq. In 70' P-Scan achieved = 5.5 Sq. In 450 P-Scan achieved = 42.0 Sq. In
\I                 Inner 15% P-Scan achieved = 10.6 Sq. In U- P-Scans 70&deg;P         45 0P

Summary No.: 1R1R-028 LaSalle Unit-I, L1 R11 LCS-1 -N2A Spring 2006 CODE CROSS-SECTIONAL AREA                    TOTAL CODE COVERAGE Percent Weld Length =   360. Required Exam     Area Scanned      of Area       Weld Length     Percent Exam Volume =    73.6      Area Sq. In.         Auto           Auto            Auto          Auto 70' T-Scan          A           11.6              6.7           9.1%             360         4.6%
450 T-Scan          A           51.4             46.9          63.7%             360         31.9%
600 T-Scan          A           10.6              10.6         14.4%             360          7.2%
700 P-Scan          A           11.6              5.5           7.5%             360          3.7%
450 P-Scan          A           51.4               42          57.1%             360         28.5%
IRS P-Scan          A           10.6              10.6         14.4%             360          7.2%
700 T-Scan 450 T-Scan 60' T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan
                                                                                % Total Composite Coverage =   83.1%
Comments:   A - Scanned 360 deg., Scanning limited due to nozzle configuration.
Note - Rounding methods may affect calculated values.

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1 R 11-029 PROJECT             LaSalle Unit 1, L R1i1, 2006 WELD ID:            LCS-1-N2G SYSTEM:             Recirculation CALIBRATION ID:                      NOZ.IN EXAMINATION DATA:                     N2G-01 OPERATORS:                           C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission; 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V5, using 450 Shear wave, 600 RL, and 700 RL search units, supplemental 0&deg; L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 450 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration.
The GERIS 2000 00 automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
Eleven (11) relevant indications were recorded that were found to be acceptable per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated Composite Coverage = 83.1%.
EPA ED BY             DATE     REVIEWED BY          DATE    UTILITY REVIEW        DATE     ANII REVIEW          DATE Level:       _UT_                Level:-
LaSalle Unit 1, L1R11, 2006                                                     Page l1of

r-LaSalle 1 C)
N2 Nozzle- Recirculation Inlet 700 45' Exam  Volume == 11.6 Sq. In Exam Volume     51.4 Sq. In Inner 15%T Exam V, olume (60'T & IRS) = 10.6 Sq. In 70' T-Scan achieve( = 6.7 Sq. In 450 T-Scan achievec = 46.9 Sq. In 600 T-Scan achieved = 10.6 Sq. In T-Sca s 70'T             4 &deg;T                607T C DI
-o 1'.

I-"
0-Cd, a)
N) 0                         LaSalle 1 N2 Nozzle - Recirculation Inlet 700 Exam Volume = 11.6 Sq. In 450 Exam Volume = 51.4 Sq. In Inner 15%T Exam Volume (607T & IRS) = 10.6 Sq. In 70' P-Scan achieved = 5.5 Sq. In
        \I                450 P-Scan achieved = 42.0 Sq. In Inner 15% P-Scan achieved = 10.6 Sq. In P-Scans 70 0 P         45 0P
    ~AJ

Summary No.: IR11-029 LaSalle Unit-i, LI R1 1 LCS-1-N2G Spring 2006 CODE CROSS-SECTIONAL AREA                    TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam      Area Scanned      of Area      Weld Length      Percent Exam Volume =     73.6     Area Sq. In.          Auto           Auto            Auto          Auto 700 T-Scan         A            11.6              6.7           9.1%             360          4.6%
450 T-Scan         A           51.4              46.9          63.7%             360         31.9%
600 T-Scan         A            10.6              10.6         14.4%             360          7.2%
700 P-Scan         A            11.6              5.5           7.5%             360          3.7%
450 P-Scan         A           51.4                42          57.1%             360         28.5%
IRS P-Scan         A            10.6              10.6         14.4%             360          7.2%
700 T-Scan 450 T-Scan 60' T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan
                                                                                 % Total Composite Coverage =   83.1%
Comments:    A - Scanned 360 deg., Scanning limited due to nozzle configuration.
Note - Rounding methods may affect calculated values.

      *GE             NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1R 11-030 PROJECT             LaSalle Unit 1, L1R11, 2006 WELD ID:            LCS-1-N2H SYSTEM:             Recirculation CALIBRATION ID:                       NOZIN MANUAL DATA:                          UT-182 EXAMINATION DATA:                     N2H-01 OPERATORS:                            C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were perfoi'med in accordance with procedure GE-UT-705 V5, using 45&deg; Shear wave, 60* RL, and 70' RL search units, supplemental 0' L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 45" Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration and the proximity of the N9-B nozzle.
Manual supplemental scanning was performed in the restricted area from 114.8" to 155.4".
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10; using 60" RL search units The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
Two (2) relevant indications were recorded that were found to be acceptable per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated and Manual Composite Coverage = 83.1%.
_EPARED BY                DATE     REVIEWED Bf           DATE    UTILITY REVIEW       DATE     ANII REVIEW          DATE Level: -T                     UT Level:
LaSalle Unit 1, L1IR11,2006                                                     Page     t   of   1 r-LaSalle 1 o)CD a)                   N2 Nozzle - R ecirculation Inlet 740 Exam Volume = 11., 6 Sq. In 450 Exam Volume = 51..4 Sq. In Inner 15%T Exam Volunne (607T & IRS) = 10.6 Sq. In 6.7 Sq. In 700 T-Scan achieved =
450 T-Scan achieved = 46.9 Sq. In 600 T-Scan achieved = 10.6 Sq. In 607T T-Sca s    70'T             45*T III                          I
                -iL-
     ~ctt

(I-CD I-o 0b LaSalle 1 N2 Nozzle - Recirculation Inlet 700 Exam Volume = 11.6 Sq. In 450 Exam Volume = 51.4 Sq. In Inner 15%T Exam Volume (60-T & IRS) = 10.6 Sq. In 70' P-Scan achieved = 5.5 Sq. In 450 P-Scan achieved = 42.0 Sq. In
        \/                   Inner 15% P-Scan achieved = 10.6 Sq. In P-Scans 70&deg;P         45 0P
        --- Z==
    ~l.
0 0

N2-J                                                    N2-H 155.40 N9-B                               0
_r 114.80 T/C PADS Automated Scanning restricted due to the proximity of the N9-B nozzle

Summary No.: IR1R-030 LaSalle Unit-I, L1R11 LCS-1-N2H Spring 2006 CODE CROSS-SECTIONAL AREA                            TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam      Area Scanned          of Area           Weld Length     Percent Exam Volume =      73.6     Area Sq. In.         Auto                 Auto               Auto          Auto 70' T-Scan          A           11.6               6.7                9.1%                360         4.6%
450 T-Scan          A           51.4              46.9               63.7%                360         31.9%
600 T-Scan          A           10.6              10.6               14.4%               319.4         6.4%
70' P-Scan          A           11.6               5.5                7.5%                360          3.7%
450 P-Scan          A           51.4               42                57.1%                360         28.5%
IRS P-Scan          A           10.6              10.6-              14.4%               319.4         6.4%
70_T-Scan 450 T-Scan 600 T-Scan          B           10.6              10.6               14.4%                40.6         0.8%
700 P-Scan 450 P-Scan IRS P-Scan          B           10.6              10.6               14.4%                40.6         0.8%
700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan 7/    I otal Luo posie Coverage =   05. 170 Comments: A - Scanning restricted due-to nozzle configuration and due to the proximity of the N9-B nozzle.
B - Manual supplemental scanning performed in area restricted by N9-B nozzle.
Note - Rounding methods may affect calculated values.

(
     'GE                 NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                    Summary No: 1R 11-031 PROJECT             LaSalle Unit 1, L1R11, 2006 WELD ID:            LCS-1-N5 SYSTEM:             Core Spray CALIBRATION ID:                       NOZ.IN EXAMINATION DATA:                     N5-01 OPERATORS:                            C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V5, using 45" Shear wave, 600 RL, and 70* RL search units, supplemental 0" L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 45" Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
K   Eleven (11) relevant indications Were recorded that were found to be acceptable per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated Composite Coverage        = 85.5%.
  ,.P!EPARED BY              DATE     REVIEWED BY           DATE    UTL0-ITY REVIEW      DATE     ANII REVIEW          DATE UT Level: ]                       UT Level:.
LaSalle Unit 1, L1R11, 2006                                                     PageJOf          Zf

I-0 t-E CD 0
LaSalle 1 N5 Nozzle - Core Spray 70&deg; Exam Volume = 9.4 Sq. In 45&deg; Exam Volume = 38.3 Sq. In Inner 15%T Exam Volume (60'T & IRS) = 8.2 Sq. In 700 P-Scan achieved = 5.0 Sq. In 450 P-Scan achieved = 32.4 Sq. In Inner 15% P-Scan achieved = 8.2 Sq. In P-Scans 70 0 P         45&deg;P I
  -El (0

o"O             LaSalle 1 N5 Nozzle - Core Spray 70' Exam Volume = 9.4 Sq. In 450 Exam Volume = 38.3 Sq. In Inner 15%T Exam V olume (607T & IRS) = 8.2 Sq. In 70' T-Scan achieved
                                     = 6.2 Sq. In 450 T-Scan achieved = 35.6 Sq. In 600 T-Scan achieved = 8.2 Sq. In T-Scars      707T         4501 T             60'T II                  I                 I
-U
-  I

Summary No.: IR1I-031 LaSalle Unit-I, LR11I LCS-1-N5 Spring 2006 CODE CROSS-SECTIONAL AREA                       TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam    Area Scanned       of Area          Weld Length    Percent Exam Volume =     55.9      Area Sq. In.       Auto             Auto              Auto          Auto 700 T-Scan          A            9.4            6.2             11.1%              360          5.5%
450 T-Scan           A           38.3            35.6           63.7%               360         31.8%
600 T-Scan           A            8.2            8.2             14.7%              360          7.3%
700 P-Scan           A            9.4            5.0             8.9%               360          4.5%
450 P-Scan           A           38.3            32.4           58.0%               360         29.0%
IRS P-Scan           A            8.2            8.2             14.7%              360          7.3%
700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan 70' T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan IRS P-Scan
                                                                                          '/o   I otal uomposie Coverage =   85b.5bo
 ~.. -~.
Comments: A - Scanned 360 deg., Scanning limited due to nozzle configuration.
I-Note - Rounding methods may affect calculated values.
-Ii

         ~GE             NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1R 11-032 PROJECT             LaSalle Unit 1, Li R1 1, 2006 WELD ID:            LCS-1-N6B SYSTEM:             LPCI CALIBRATION ID:                       NOZ.INIT.IN EXAMINATION DATA:                     N6B-01 OPERATORS:                            C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V5, using 45" Shear wave, 60" RL, and 70&deg; RL search units, supplemental 0&deg; L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 45" Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
("  Six (6) relevant indications were recorded that were found to be acceptable per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated Composite Coverage = 83.7%.
P
   ,PEPARED      BY          DATE     REVIEWED BY           DATE ' UTILITY REVIEW         DATE   ANII REVIEW            DATE "T Level: j--                     UT Level:
LaSalle Unit 1, LiR11, 2006                                                      Page__I     Of   t 9,

LaSalle 1 N6 Nozzle - LPCl 700 Exam Volume = 12.0 Sq. In 450 Exam Volume = 44.8 Sq. In Inner 15%T Exam Volume (60&deg;T & IRS) = 9.6 Sq. In 70&deg; T-Scan achieved = 7.1 Sq. In 450 T-Scan achieved = 40.8 Sq. In 60&deg; T-Scan achieved = 9.6 Sq. In 707T         45&deg;T            600 T T-Scans

7N LaSalle 1 N6 Nozzle - LPCI 700 Exam Volume = 12.0 Sq. In
(
450 Exam Volume = 44.8 Sq. In Inner 15%T Exam Volume (60&deg;T & IRS) = 9.6 Sq. In 70' P-Scan achieved = 5.9 Sq. In 450 P-Scan achieved = 38.2 Sq. In
____               Inner 15% P-Scan achieved = 9.6 Sq. In P-Scans    700 P        450 P-Scans I
I N

Summary No.: 1Rl1-032 LaSalle Unit-I, Li R11 LCS-1 -N6B Spring 2006 CODE CROSS-SECTIONAL AREA                 TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam      Area Scanned   of Area      Weld Length      Percent Exam Volume =      66.4      Area Sq. In.         Auto         Auto            Auto          Auto 70' T-Scan           A            12                7.1       10.7%             360          5.3%
450 T-Scan           A           44.8              40.8       61.4%             360         30.7%
60o T-Scan           A            9.6               9.6       14.5%             360          7.2%
70' P-Scan           A            12                5.9        8.9%             360         4.4%
450 P-Scan           A           44.8              38.2       57.5%             360         28.8%
IRS P-Scan           A            9.6               9.6       14.5%             360          7.2%
70_T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 70_P-Scan 450 P-Scan IRS P-Scan
                                                                              % Total Composite Coverage =   83.7%
Comments: A - Scanning restricted due to nozzle configuration.
Note - Rounding methods may affect calculated values.

GE NUCLEAR ENERGY
(                  UT EXAMINATION 

==SUMMARY==
SHEET                                  Summary No: 1R 11-033 PROJECT           LaSalle Unit 1, LR1i1 WELD ID:          LCS-1-N7 Top Head Nozzle SYSTEM:           RPV CALIBRATION ID:            N/A MANUAL DATA:               UT-103, 104,113 and 114 OPERATORS:                 S. Snyder Lv II, Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, and Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II,Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 VI 0; using 60&deg; RL search units. Manual parallel scans of the inner 15%T volume were performed in accordance with procedure GE-UT-31 I V14, using model validated shear wave search units.
Manual scanning was restricted due to the nozzle configuration.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage = 87 %
DATE    ANII REVIEW          DATE 1
LaSalle Unit-l, L1R11, 2006 Page 1 of __

Report No. 1R11-033 LaSalle Unit 1, L1R11 LCS-1 -N7 Spring 2006 CODE CROSS-SECTIONAL AREA                       TOTAL CODE COVERAGE Percent Weld Length =      360. Required Exam     Area Scanned         of Area        Weld Length   Percent Exam Volume =        22. Area Sq. In.         Manual           Manual            Manual     Manual 600 T-Scan S4           A          2.2                2.2            10.0%              180.0      2.5%
60' T-Scan S6            A         19.8               16.6            75.5%             180.0      18.9%
IRS P-Scan S4            A          2.2               2.2             10.0%             180.0       2.5%
60' P-Scan S6            A         19.8               15.0            68.2%             180.0      17.0%
Exam Volume =       21.7 60' T-Scan  S4          B          3.8                3.8            17.5%             180.0      4.4%
600 T-Scan  S6          B         17.9               16.7 .          77.0%             180.0      19.2%
IRS P-Scan   S4          B          3.8               3.8             17.5%             180.0      4.4%
600 P-Scan   S6          B         17.9               15.8            72.8%      [      180.0      18.2%
600 T-Scan   S4 600 T-Scan S6 IRS P-Scan  _4 600 P-Scan S6 600 T-Scan S4 60' T-Scan S6 IRS P-Scan S4 60' P-Scan   S6
                                                                                     % Total Composite Coverage =    87%
Comments: A - Top side of offset nozzle. Examined 1800 length. Scanning limited due to nozzle configuration.
B - Bottom side of offset nozzle. Examined 1800 length. Scanning limited.due to nozzle configuration.
Weld length in degrees. IRS examination coverage determined by modeling.
Coverage sheet modified for offset nozzle configurations.
Note - Rounding methods may affect calculated values.

Top Side Coverage LaSalle Unit 1        600 NS Exam Volume = 7.3 Sq. In.
600 FV S6 Exam Volume = 12.5 Sq. In.
Top Hd. Spray / Spare 60&deg; FV S4 Exam Volume = 2.2 Sq. In.
60&deg; NS T-Scan achieved = 4.2 Sq. In.
60' FV S6 T-Scan achieved = 12.4 Sq. In.
Bottom Side Coverage                                                      600 FV S4 T-Scan achieved = 2.2 Sq. In.
60' NS Exam Volume = 6.09 Sq. In.                                         600 NS P-Scan achieved = 3.8 Sq. In.
60' FV S6 Exam Volume = 11.8 Sq. In.                                      60' FV S6 P-Scan achieved = 11.2 Sq. In.
60' FV S4 Exam Volume = 3.8 Sq. In.                                       Inner 15%T IRS-Scan achieved = 2.2 Sq. In.
60' NS T-Scan achieved = 4.9 Sq. In.
60* FV S6 T-Scan achieved = 11.8 Sq. In.
60' FV S4 T-Scan achieved = 3.8 Sq. In.
60' NS P-Scan achieved = 4.3 Sq. In.
60' FV S6 P-Scan achieved = 11.5 Sq. In.
Inner 15%T IRS-Scan achieved = 3.8 Sq. In.
5.2-  4.6" 60OT 60'P 9"
10" 45&deg;P 11.0"60&deg;P 60-T r

GE NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                  Summary No: 1Ri 1-034 PROJECT           LaSalle Unit 1, LI R1 1 WELD ID:          LCS-1 -N8 Top Head Nozzle SYSTEM:           RPV CALIBRATION ID:             N/A MANUAL DATA:                UT-115, 116, and 117 OPERATORS:                  W. Reid Lv II, Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, and Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10; using 600 RL search units. Manual parallel scans of the inner 15%T volume were performed in accordance with procedure GE-UT-311 V14, using model validated shear wave search units.
Manual scanning was restricted due to the nozzle configuration.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage = 79 %
(
PEPAkED BY             DATE     REVIEWED BY           DATE    UTIL-TY REVItW      DATE    ANII REVIEW          DATE UT Level:  tIc                  UT Level:
LaSalle Unit-l, L1R11, 2006 Pagelof    _7 o

Report No. 1Rll-034 LaSalle Unit 1, L1R11 LCS-1-N8 Spring 2006 CODE CROSS-SECTIONAL AREA                 TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam    Area Scanned     of Area      Weld Length    Percent Exam Volume =     24.8      Area Sq. In.        Manual      Manual          Manual      Manual 600 NS T-Scan         A           7.6               3.5        14.1%            360         7,1%
60' S6 T-Scan         A            14               13.7       55.2%            360        27.6%
60' S4 T-Scan         A           3.2               3.2        12.9%            360        6.5%
60' NS P-Scan         A           7.6               3.1        12.5%            360        6.3%
600 S6 P-Scan         A            14               12.5       50.4%            360        25.2%
60' S4 P-Scan         A           3.2               3.2        12.9%            360        6.5%
60' NS T-Scan 60' S6 T-Scan 600 S4 T-Scan 600 NS P-Scan 600 S6 P-Scan 60' S4 P-Scan
                                                                             % Total Composite Coverage =   79%
Comments: A - Manual scanning restricted due to nozzle configuration.
Note - Rounding methods may affect calculated values.

600 NS Exam Volume = 7.6 Sq. In.
600 FV S6 Exam Volume = 14.0 Sq. In. LaSalle Unit 1 600 FV S6 Exam Volume = 3.2 Sq. In.
LCS-1-N8 Top Hd. Vent 60&deg; NS T-Scan achieved = 3.5 Sq. In.
60' FV S6 T-Scan achieved = 13.7 Sq. In.
600 FV S4 T-Scan achieved = 3.2 Sq. In.
60' NS P-Scan achieved = 3.1 Sq. In.
60' FV S6 P-Scan achieved = 12.5 Sq. In.
600 FV S4 P-Scan achieved = 3.2 Sq. In.
                                          "P-Scans 6.4"60OT
                                                           -  1-
                                           -d   4.21    a    KWI

     *GE             NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1 R1 1-026 PROJECT             LaSalle Unit 1, L'lR'11, 2006 WELD ID:            LCS-1-N16 SYSTEM:             Core Spray CALIBRATION ID:                       NOZIN EXAMINATION DATA:                     N 16-01 OPERATORS:                            C. Gauthier Lv II; S. Gauthier Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV)
Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V5, using 45* Shear wave, 600 RL, and 70' RL search units, supplemental 0&deg; L-Wave scans were also performed.
Scanning for the inner 15% T volume for radial flaws was performed using 45&deg; Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface. Automated scanning was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
For calibrations refer to report G2K-CAL.
Six (6) relevant indications were recorded that were found to be acceptable per the requirements of IWB-3000, no further evaluations were required.
Previous examination data was reviewed, no indications were recorded.
Automated Composite Coverage = 85.5%.
PEPAR D      BY          DATE     REVIEWED BY           DATE     UTILI      IEW       DATE    ANII REVIEW           DATE TULvelee                            Le__ ,U                                                       _
LaSalle Unit 1, LIR11, 2006                                                       Page   I   Of 19

U)4 0              -LaSalle                               1 N16 Nozzle - Core Spray 70' Exam Volume = 9.4 Sq. In 45' Exam Volume = 38.3 Sq. In Inner 15%T Exam V olume (60&deg;T & IRS)     8.2 Sq. In 70' T-Scan achievec -= 6.2 Sq. In 450 T-Scan achievec I = 35.6 Sq. In 600 T-Scan achievec = 8.2 Sq. In Z                         T-Scals   70'T         45&deg; r                60'T
        * =I-I                         I             I                   I m           l   (t!

CD)
I-a 0
0)
LaSalle 1 N16 Nozzle - Core Spray 700 Exam Volume = 9.4 Sq. In 450 Exam Volume = 38.3 Sq. In Inner 15%T Exam Volume (60'T & IRS) = 8.2 Sq. In 70' P-Scan achieved = 5.0 Sq. In 450 P-Scan achieved = 32.4 Sq. In Inner 15% P-Scan achieved = 8.2 Sq. In P-Scans 70Tp         45TP I
 -U CD 0

Summary No.: IR11-026 LaSalle Unit-I, L1R11 LCS-1-N16 Spring 2006 CODE CROSS-SECTIONAL AREA                 TOTAL CODE COVERAGE Percent Weld Length = 360.       Required Exam    Area Scanned     of Area       Weld Length     Percent Exam Volume = 55.9          Area Sq. In.       Auto           Auto            Auto          Auto 700 T-Scan          A             9.4            6.2          11.1%             360          5.5%
450 T-Scan           A           38.3            35.6         63.7%             360         31.8%
600 T-Scan           A            8.2            8.2          14.7%             360          7.3%
70' P-Scan           A            9.4             5.0          8.9%             360          4.5%
45' P-Scan           A           38.3            32.4         58.0%             360         29.0%
IRS P-Scan           A            8.2             8.2         14.7%             360          7.3%
700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 45' P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan IRS P-Scan
                                                                              % Total Composite Coverage =   85.5%
Comments: A - Scanned 360 deg., Scanning limited due to nozzle configuration.
Note - Rounding methods may affect calculated values.

        *GE           NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                   Summary No: 1 R 11-027 PROJECT           LaSalle Unit 1, Li R1 1 WELD ID:          LCS-1-N18 Top Head Nozzle SYSTEM:           RPV CALIBRATION ID:             N/A MANUAL DATA:                UT-099, 100, 129 and 130 OPERATORS:                  S. Snyder Lv II, a
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, and Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel 00 surface in accordance with procedure GE-UT-300 V10; using 600 RL search units. Manual parallel scans of the inner 15%T volume were performed in accordance with procedure GE-UT-31 1 V14, using model validated shear wave search units.
Manual scanning was restricted due to the nozzle configuration.
The manual exams recorded no indications.
Previous data was reviewed with no significant changes.
Manual UT composite coverage = 87 %
Ll                                                                                                                      ii LaSalle Unit-i, L1R11, 2006 Page1 of

Report No. 1RII-027 0)
&#xa3;1)
LaSalle Unit 1, L1R11 C                                                                      LCS-1-N18 Spring 2006 r-CODE CROSS-SECTIONAL AREA                       TOTAL CODE COVERAGE Percent Weld Length = 360.         Required Exam    Area Scanned         of Area         Weld Length    Percent Exam Volume = 22.            Area Sq. In.        Manual           Manual             Manual       Manual 600 T-Scan S4          A            2.2               2.2            10.0%              180.0         2.5%
600 T-Scan S6          A           19.8               16.6           75.5%              180.0        18.9%
IRS P-Scan S4           A           2.2               2.2            10.0%              180.0         2.5%
600 P-Scan S6           A          19.8               15.0           68.2%              180.0        17.0%
Exam Volume =       21.7 600 T-Scan S4           B           3.8                3.8           17.5%              180.0         4.4%
60' T-Scan S6           B          17.9               16.7           77.0%              180.0        19.2%
IRS P-Scan S4           B           3.8                3.8           17.5%              180.0         4.4%
600 P-Scan S6           B          17.9               15.8           72.8%              180.0        18.2%
600 T-Scan S4 600 T-Scan  S6 IRS P-Scan S4 600 P-Scan S6 600 T-Scan S4 600 T-Scan  S6                                                                                    ' '
IRS P-Scan  S4 60' P-Scan S6''
STotal Composite Coverage =     87%
Comments: A - Top side of offset nozzle. Examined 1800 length. Scanning limited due to nozzle configuration.
B - Bottom side of offset nozzle. Examined 1800 length. Scanning limited due to nozzle configuration.
Weld length in degrees. IRS examination coverage determined by modeling.
Coverage sheet modified for offset nozzle configurations.
Note - Rounding methods may affect calculated values.

I-Top Side Coverage LaSalle Unit 1        600 NS Exam Volume = 7.3 Sq. In.
600 FV S6 Exam Volume = 12.5 Sq. In.
Top Hd. Spray / Spare 60&deg; FV S4 Exam Volume = 2.2 Sq. In.
60' NS T-Scan achieved = 4.2 Sq. In.
600 FV S6 T-Scan achieved 12.4 Sq. In.
Bottom Side Coverage                                                     600 FV S4 T-Scan achieved 2.2 Sq. In.
60' NS Exam Volume = 6.09 Sq. In.                                        600 NS P-Scan achieved = 3.8 Sq. In.
600 FV S6 Exam Volume = 11.8 Sq. In.                                     60' FV S6 P-Scan achieved = 11.2 Sq. In.
60' FV S4 Exam Volume = 3.8 Sq. In.                                      Inner 15%T IRS-Scan achieved = 2.2 Sq. In.
60' NS T-Scan achieved = 4.9 Sq. In.                                                        10,6" 60' FV S6 T-Scan achieved = 11.8 Sq. In.
600 FV S4 T-Scan achieved = 3.8 Sq. In.
600 NS P-Scan achieved = 4.3 Sq. In.
60' FV S6 P-Scan achieved = 11.5 Sq. In.
Inner 15%T IRS-Scan achieved = 3.8 Sq. In.
45-P 60&deg;TIP 5.2" 607T 9-10- 45-P~
1i1.o060*P1&#xfd; 607T    1

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                               IRII-oel GE NUCLEAR ENERGY Site:           LaSalle Station                            Component ID:                       RPV-SS-1 Outage:                  LIR11                                                                         Lua System:                RPV                ASME Cat.:           B-K           ASME Item         810.10     Aug Req.:             ASME Sec.XI Exams            Data Sheet     .       . Procedure                      Calibration Block          Examination              Cert Level     Date Performed                                                                                                Personnel PT               PT-01I                          V.rr/RvV5 100-PT-OO                           N/A                Alicia Hutton                 II1      3/5/2006 VT-1              VT-001              ER-AA-335-Q14 Ver/IRev R2                   N/A                Alicia Hutton                 II       3/5/2006 Examination Results:
During the liquid penetrant and the visual examination of the above referenced weld, no recordable indications were detected.
Due to adjacent structures only 66% of the required exam area was accessible for PT inspections. Due to this limiting condition a VT-i examination was performed on 100% of the required examination area.
This examination meets the requirements of ASME Section Xl, 1989 Edition with no Addenda.
Examination results were compared to data report:                 D-733         from       1989   outage with          i1*!;  No Change These examinations were performed under Work Order:                   704866                                                  Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:                         RWP:      N/A
_.* ....... &#xfd;l*        Dose:     24      mr.
Utility Review:                                Date:
GE.. RB                      L l:           Dat                 R      :                                 Dat
                                                                                                               "                   P' GE Review By:                    Level:         Date:         ANII Review:                                   Date:                Page   1   of   3

GE Nuclear Energy                                     LIQUID PENETRANT EXAMINATION REPORT Site: LaSalle Station                          Unit:  I        Project: LIRII                  Report Number:                    IRII-061 Sheet No.:                        PT-011 Weld No.:        RPV-SS-i                                              Configuration:   Lua Drawing:         GEL-1109                                              System:          RPV Procedure No.:           GE-PT-1O0                       Ver/Rev.:         V5           DRR:                      N/A Material:                           Surface Condition:                   Item:
Carbon Steel                        Ground                               Weld - Final Technique:                                                                                Cleaner             Penetrant            Developer Visible Solvent Removable (8-3)                                Manufacturer              Maanaflux            Maenaflux              MaRanflux Thermometer        245993                                      Brand I Type                SKC-S                SKL-SPI                SKD-S2 Temperature;       85F                                         Batch No.                  04GO0K                 01KOS5                99D14K Black Light:       N/A                                  Light Meter. N/A                          Blacklight Intensity:            N/A pW/cm2 Pre Clean Method:                 Spray & Wive                                  Drying Time:                  5 min.
Penetrant Application             Brushing                                      Dwell Time:                   10 min.
Penetrant Removal                 Wipe with dry towel                           Drying Time:                  5rmin.
Wipe with damp towel Developer Apjolication:            Sprav                                         Developing Time:              10 mrin.
Indication Number:                                                   

== Description:==
Results:
Comments:
Exam Start: 1010.
Exam was performed on the accessible area's 66% tori and both sides. A VT-1 rnrnminatinn w*.q n~rfnrm~v4 nn 1nno1%     nf thA_hin 5== 'iT-I I*nrt VJT-001 m E     forwas performed results. No recordable      sible ar 's 66% too and both sid . A VT-1 examination was nerformed on 1000,L of tha fun See VT-1 Re - VT-on the accindications.
001   for results. No recordable indications I Alicia Hutn                                                                                                      Date Level       Date GE Review                               Level       Date             ANI!        ,                               Date             Page     . of 3 ANII Review

Q                 GE NuclearEnergy                                          VISUAL EXAMINATION REPORT i eport Number:                 R1l1-061 Site:    LaSalle Station                  Unit: 1        Project:      LIR11o:
Sheet No.:                   VT-0O01 Weld No.:     RPV-SS-1                                          Configuration: Lua ASME Code Class:        I                     ASME Category: B-K                       ASME Item:          B10.10 Drawing:          GEL-1109                              System:      RPV Procedure No.:        ER-AA-335-014                 Version:         R2          DRR:                     N/A TECHNIQUE                   EQUIPMENT                        LIGHTING                     TOOLS                   RESOLUTION Exam Type: VT-i              i   Minor                       - Flashlight             '*  Six Inch Scale             Gray Card Tehiqe Technique:   Direct          7   Magnifier RemoteBANVideo             [7 Ambient F-,  Other                 F]1Bintoculars Welding Gauge                          -3 Remote Color Video             N/A                       Thread Gaug 1otter                                                HO"er N/A                                                      N/A COMPONENT DATA Material                    Surface Condition             Equipment Condition        Component Carbon Stee                 Ground                        N/A                        Final Weld Indication Numberj                                            

== Description:==
Results:
Comments:
A VT-1 examination was performed on 100% of the lug.
Lug is 14"w* 7" h.
No Recordable Indications Alicia Hutton                   It             3/5'2006             &4                                 o(ciIu xaminer                        Level       DateutlyReiwDe GE Review                       Level       Date            ANII Review                                  Date        Page    3      of 3

Site.        LaSalle Statio n                             Component ID:                    IHP-PUI-04 Outage:                LIR11                                                                Plate-Shell Svstem:             HPCS             ASME Cat.:        C-C           ASME Item:     C3.30       Aug Req.:       ASME Sec.Xl Exams       Cal I Data Sheet           Procedure              Calibration Block            Examination         !Cert LevelO     Date Performed                                                                                    Personnel MT                              "  E-MT-001
                                          -     VrRev S                  N/A    -           Alicia Hutton             II     i 2122/2006 Examination Results:
During the magnetic particle examination of the above referenced weld, no recordable indications were detected.
16% of the required exam area was examined.
This examination meets the requirements of ASME Section XI, 1989 Edition with no Addenda.
Examinationresults were compared to data report:          NIA          from     N/A     outage with            No Change These examinations were performed under Work Order          704866                                            Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:          RWP:        N/A t-R 13.3I*920o                                        Dose:       3     mr.
Ui         Jiew:                             Date:
GE Review By:                                        ANII Review:                                 Date:           Page    1   of

GE NuclearEnergy                                 MAGNETIC PARTICLE EXAMINATION REPORT Site:    LaSalle Station                 Unit: I          Project:      LIR11                   Report Number:               IRII-073 Sheet No.:                  MT-0O01 Weld No.:     IHP-PUI-04                                          Configuration:      Plate-Shell Drawing:      GEL-1049                                            System:             HPCS Procedure No.:        GE-MT-1O0                           Version / Revision:          V6           DRR:                N/A Material:                       Surface Condition:                    Item:
Carbon Steel                     Cleaned                              Weld - Final Magnetizing Apparatus                                                              Black Light Mfg:              ParkerResearch         Yoke Calibration: 2-15-06                                             Model           Serial Number Model:            B-300                                                                     Blacklight:    N/A              N/A Serial No.        5522                   Yoke Spacing:          4"-6"                       Light Meter:   N/A              N/A Thermometer:           245993                     Surface Temperature:              82&deg; F Technique                                     Examination Medium                                      Blacklight Intensity Magnetization: AC                         Magnetic Particles:        Dry                                                    N/A Continuous                ParkerResearch                RP-6              11793                   Blacklight Intensity Technique:
Manufacturer          Particle Type:       Batch No.:
Indication Number:;                                            

== Description:==
Results:
NRl Comments:
Examined only 28" of the 171.25" due to concrete pedestal surrounding the pump. See attached photo, No recordable indications.
Alicia Hutton                      I.      2/222006          Util yR v                                    Date I[itainer                      Level       Date GE Review                       Level       Date              ANII Review                                   Date         Page        L     of 3

0          GEN'ticlearEngat           SKETCH SHEET             Report No:         IRI1-073 Component ID:         IHP-PUI1-04 Accessable portion of weld prior to paint removal Examiner                       Lv .,      Date  -    -Da-:             Reviewed By:                      -Date:  12 o ,/p Utii~ty Reviewed By:j   -  f$Q       Lv.       D_
Date:   ;I .2l6-0                                         Page   3of _3

Site:        LaSalle Station                              Component ID:                     ILP-PU-04 Outage:                LIRII                                                                Plate-Shell System:             LPCS             ASME Cat:          C-C        ASME Item:         C3.30     Aug Req:        ASME Sec.Xl Exams        CalI Data Sheet           Procedure              Calibration Block            Examination         &#xfd;Cert Level4     Date Performed                                                                                    Personnel MT             MT-003            GElMay.&deg; Ver/ev VS .         .      A                   Clay Suhler             _11     1 2/23/2006 Examination Results:
During the magnetic particle examination of the above referenced weld, no recordable indications were detected.
24% of the required exam area was examined.
This examination meets the requirements of ASME Section X1, 1989 Edition with no Addenda.
Examination results were compared to data report:         N/A         from         N/A  outage with           No Change These examinations were performed under Work Order          704866                                            Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:
RWP:        NALI rdyLR     e4-3s-tlo*                            Dose:       3     mr.
Ut.ityR view:                               Date:
GE Review By:                                         ANII Review:                                Date:          Page    1    of   3

GE NuclearEnergy                                    MAGNETIC PARTICLE EXAMINATION REPORT Site: LaSalle Station                    Unit: I          Project:        LIRII                  Report Number:               IR11-074 Sheet No.:                  MT-003 Weld No.:      ILP-PU-04                                          Configuration:       Plate-Shell Drawing:       GEL-1050                                           System:              LPCS Procedure No.:         GE-MT-100                          Version / Revision:           V6           DRR:                 N/A Material:                       Surface Condition:                      Item:
CarbonSteel                      Cleaned                                Weld - Final Magnetizing Apparatus                                                               Black Light Mfg:              ParkerResearch         Yoke Calibration: 2115/06                                              Model           Serial Number Model:            B-300                                                                      Blacklight:    N/A               N/A Serial No.        5522                   Yoke Spacing:           6"                          Light Meter:   N/A               N/A Thermometer:           246641                       Surface Temperature:             840 F Technique                                    Examination Medium                                       Blacklight Intensity Magnetization: AC                         Magnetic Particles:          Dy                                                    N/A Technique:        Continuous                ParkerResearch                 RP-6              11793                   Blacklight Intensity:
Manufacturer            Partide Type:       Batch No.:
Indication Number:;                                             

== Description:==
I-Reuts:
                                                                   ....                                                                N RI.
Comments:
Examined only 28" of the 117.20" due to concrete pedestal surrounding the pump. See attached photo.
No recordable indications.
Clay Suhler           60           //      2123/2006        Uti tyReliew                                   Date
 $jiti       iner               Level      Date GE Review                       Level      Date              ANII Review                                     Date         Page               of 3

W      GE Nuclear Energi,           SKETCH SHEET            Report No:         IR11-074 Component ID:         ILP-PU-04 Accessable portion of weld Rev~ewed By:____________           Lv. V-7Data:        &Z~''D       Reviewed By:                        Date:
Utility Reviewed By:       &#xfd;-' LL-      v Lv.         Dt:Pge3 Date:                                                  Page       o 3 3 of

Report No.:
         \~/GE      NUCLEAR ENERGYY                              EXAMINATION 

==SUMMARY==
SHEET                                       IRI-075 Site:         LaSalle Station                          Component ID:                 IRH-PUIC-04 Outage:                 LIR11                                                               Plate - Shell System:               RHRR             ASME Cat.:           C-C        ASME Item         C3.30       Aug Req.:      ASME Sec.Xl Exams        T  DataSheet                  Procedure                  Calibration Block          Examination       Cert Level     Date Performed                                                                                          Personnel MT      j      MT-009               GE-MT-1O0 Ver/Rev V6                  NWA                  Alan Kelly           II      2/28/2006 Examination Results:
During the magnetic particle examination of the above referenced weld, no recordable indications were detected.
21% of the required exam area was examined.
This examination meets the requirements of ASME Section X1, 1989 Edition with no Addenda.
Examinationresults were compared to data report:             NIA          from       N/A    outage with          No Change These examinationswere performed under Work Order:              704866                                        1  Change This Summary and the following data sheets have been reviewed and ac epted by the following personnel:
RWP:      N/A
                                                                                                      .O     //cae    Dose:             mr.
eel B:
EReie                     ANReview:
l     a/ite                              Date:          _     1__ of___
GE Review By:                   Level:        Date:       ANII Review:                                 Date:         Page   1 of3

iW                  GE NuclearEnergy                                   MAGNETIC PARTICLE EXAMINATION REPORT Site: LaSalle Station                   Unit: I               Project: LIR1I                   I Report Number:                         1RIl-075 Sheet No.:                            MT-009 Weld No.:    IRH-PUIC-04                                           Configuration:       Plate- Shell Drawing:     GEL-1003                                              System:              RHR Procedure No.:        GE-MT-100                               Version / Revision:        V6          DRR:                            N/A Material:                       Surface Condition:                      Item:
CarbonSteel                     Cleaned                                 Weld - Final Magnetizing Apparatus                                                                     Black Light Mfg:              ParkerResearch        Yoke Calibration: 2115/06                                                    Model               Serial Number Model:            B-300                                                                       Blacklight:        N/A                   N/A Serial No.        8164                  Yoke Spacing:             3"-6"                       Light Meter:         /A                  N/A Thermometer           246541                       Surface Temperature:                  730 F Technique                                          Examination Medium                                        Blacklight Intensity Magnetization: AC                        Magnetic Particles:           Pry                                                             N/A Continuous               ParkerResearch                   RP-6              11793                          Blacklight Intensityt.
Technique:
Manufacturer.           Particle Type:      Batch No.:
Indication Number                                 -Description:                                                                              Rsls Comments:
Examined 25" of 116.375" due to concrete pedestal surrounding the pump. See attached photo.
No recordable indications.
Alan Kell                           /_    2/28/2006                                                            Date' Reiaew                       Level      Date IGEReview                       Level      Da te,                ANI Review                                      Date                 Page   *,       of 3

                 ''GE   NucerEyr SKETCH SHEET Report No:   lRll-075 CG'HPOueut LD:
4 Report No:
1R11475                      IRH..PLIC..O Compo~~~~
ID:
Acess    pabe of portion weld I>
Reviewed By:         /&
Lv. W       ae Reviewed By:            ~) ~3Date./~~
Utility Reviewed 8 Lv. -' -  Date:_____
r Y
Page

$ENERAL 0 ELECTRIC I
POMP         LOCXATION
: 2.              G-2o c- Is 2.C 2c.
ELEV. CpT5' R),R. POMP AkSSE-MBLY REP. liSPeC'OI&#xfd;f   C.r..KMuSTs IP -Iv3    . -,Zs IP,M e-2,4.
                     ?T-S-8 X4 4*V- - - -
OAK Whoiok.ZLL GEL.- I os

UW-9            S LZT7~IJ~                                                                               4.....   *4 I,                        I
                                                                                                                                                'I A
u1  4 S~'
I-I                  MWI jimms, 11           M.A~
L.&AW L&~IIt I                           ..... ,I                                                                                 'I.
I
                                                                                                                                                                                                                                                                                 *    ~5S~
I                                                                                                                                                                            *p.....    . m
                                                                                                                                                                                                                                              *I*l   , #:
                                                                                                                                                                                                                                                                                  *  . Si RO 4.
T.
Au              I                                                                                     ,   *     ,.
4.
I.,                   ..
                                                                                                                                                                                                                                                          -d 713-I Ail      .1
                                                                                                                                                                   .4
                                                                                         '4'.
3.4.,
                                                                                                                                                                                                                      .I      .
I y                                .   ~
I  .
I   -
                               ..-. S.                                                                                                                .        j i
                                             "B
                                                                                                                                                            .                 I-         '          x--     .. _Jm
* u, Lb                                     CNS-                                a' of
                                                    ~                                             r t
                                                                                                                                                                                                                                          "i 3
M_
          .!"780,-"
* I -            ~
                                                                               -                ~
                                                                                                                                             -  I          -
A if!:!
                                                                                                                                                                                                                ,i*  :.
                                                                                                      'At's
                                                                                                                                                                     ~    j'Y*C*
EIJ                1L' eo,* '78 I.
r~.l&deg;*:.
2,,
                            *~
h "Be            V I
                                                                                                                 "V
(        I~4.
5;.
I   IIII     I  III     I
                                                                                                                                                                                              &#xa3;4
                                                                                                                                                                                                                           *   - Si K3-I.
a'..                       I~v-'Ia, Air!
                                                                                            *4       .1W*       oar 4N'                  *               :i!(y#
                                                                 ,..           - :                          ::           * .....Ii .....      ::                                *'
                                                                                                                                                                              "555
* t           :**
low NO KLEU 31To                                                                                               U                                                                        V. m-EU'Ewll
 -  1 snJ~J~ I    4
                                               *d                                                                                                                                                                                                 70G.ICO Too          comnw UI%         MCmlNUA
                                                                                                                                                               , "-,.:                                                       -r                                       04LIE5r-&M              8MU~
   ~1.~,i~.a                 *1              I
                                                                                                                                                              -4=4                  ASAL El-                             ;~ &#xfd;LASALLE. Coui.t' Ret To94AM Assuo Uin AWOMamtWWV                   -. 4-                                                                                               %T1Jtm I                                                                                                      tCMCIMI ,
I    .*     .
4....................................................                                                                                   &#xfd;EERI, NG' I                                                                                                                                                                              INSORCcc INSECI1OI ii ZI                    i~E                                                                                                                                      *1~--                        'MAP                                                PRO, RAM IrAUNG  NO
                                                      -   I*
                                                                                                                                                                     - U     ~U S YSTEM

IGENEIAL 0 ELECTRIC                   LGE&deg; 10 1SO&deg; TOP VESSEL. NEAhO 0irIT **2

I GEL- 1001 GENERAL
 .I     IF ELECTRIC                        GLIO tWo*                                  so a BOTTOM VESSEL. AE40 OWT z.

IGENERAL
* ELECTRIC FG&#xfd;&#xfd;-) i I I MOTE: Aab         c &PAE.
                                         .Q04kLLY SPACED 4OT_: LOCATIC*4 4X2A a M 20.5 semE Wa.    *&A2T                  SERI-ACE   AT".R, OOTLET I R~k-WA&2I,.b R         UET EXC        .MGP.PR

I
*~* CURL tLIETUIC RLEF: Imp- P02.
NP POMP ASSM*.*LY OMIT 2.
Q&K BROOKb,,,L.

SENERAL
* ELECTRIC GF-L-ZC)%
REF :ILP-POZ LP POMP-ASSEMBLLY OM1k4IT 2

COMMONWEALTH EDISON COMPANY                                                                                           Page 20 of 22 Procedure No. NDT-C-30                Rev. 2                                                                          December, 1993 ULTRASONIC TESTING DATA SHEET                    NDT-DS-C2A
(
STATION/UNIT:        /rF?//*                   /    2 PAGE:-:;:;       /        OF PROCEDURE:    NDT-
* 30    REV.      _,    DATA SHEET NO.:                        /  27-    /4       DAM&#xfd;          /a      -    -Z CALIBRATION SHEET NO.(S)
ST. BEAM:               0-2?a             ANGLE BEAM:      axial           At114-                  circ. _        _        _     _   _
COMPONENT INSPECTED SYSTEM:       /2TV                         WELD #: 6&-/0C'           0 - /9               WELD TYPE:        77&#xf7;      -       -
rpIZE:          2/                THICKNESS/SCHEDULE:              S. YC                     MATERIAL:           c      .
COMPONENT TEMPERATURE:                   '/                -
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                     <f d6                   ANGLE BEAM AXIAL:                               AAq/
COUPLANT/
BATCH #:           ?;C-&eL_-    :A:     *     -2                           ANGLE BEAM CIRC.:                   ,,4 /(?
EXAMINATION     SCANS Performed                         Indications YES       NO            NO                  YES
: 1) Base Metal        Straight        Beam                      /-                   _
: 2) Angle Beam-Normal-Against                 Flow                           -         N
: 3) Angle Beam-Normal-With Flow                                               -         /
(          4) Angle Beam-Along Weld-CW                                               -          i/a
: 5) Angle Beam-Along Weld-CCW                                            -
* F L    6) Straight Beam of Weld                                                              V 0
W    7) Thickness Across Weld & Base Metal                                                                   /
UP STRM       WELD                  DN STR EXAMINER:                                                          LEVEL:     /7i                    DATE:_____
REVIEWER:-                                                         LEVEL:       =/~Zi                DATE:_            _____
OTHER:    C.-                                    5,A;,-V,!57       LEVEL:   -Z     T                 DATE:   /             'Z STATION:                     6.DATE:_                                          _____
AN II:           ~               ..                                DATE:       JI~1

COMMONWEALTH EDISON COMPANY                                                                                    Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                                    December, 199:
ULTRASONIC TESTING DATA SHEET                NDT-DS-C2A
(
STATION/UNIT:         I     <      //-       /
* PAGE,             ( OF       /
PROCEDURE:     NDT- C 30        REV. .2        DATA SHEET NO.:      __      -/     ___             DATk:         /1     27 CALIBRATION SHEET NO. (S)
ST. BEAM:         N/F1-                 ANGLE BEAM:    axial          /                      circ.                   (2,-OW COMPONENT INSPECTED SYSTEM:       12 P   V                 WELD #: 6E-/"e            - /1          WELD TYPE:          7-4       -
PIPE 4IZE:      .?/              THICKNESS/SCHEDULE:          5.   '/0              MATERIAL:
* S COMPONENT TEMPERATURE:              */        /
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:             N   //                 ANGLE BEAM AXIAL:                  .           d COUPLANT/
BATCH #:    0                    ?7
* ANGLE BEAM CIRC.:                  'q       d EXAMINATION SCANS Performed                       Indications YES        NO      NO                       YES
: 1) Base Metal Straight             Beam                              ,              _      _/_                 _    _
: 2)  Angle Beam-Normal-Against Flow                     __                      P.z                ,,
: 3)  Angle Beam-Normal-With Flow
: 4)  Angle Beam-Along Weld-CW                                                 7                               _
: 5)  Angle Beam-Along Weld-CCW F
L   6)  Straight      Beam of Weld                                    /-                 _        __
0W   7)  Thickness Across Weld & Base Metal                                            /&#xfd;4/A/4 UP STRM              WELD          DN STR ADDITIONAL COMMENTS A~~4p~~~&~~Fr
                                    -,)                                         P/d~ 0     -3cj         ri     2I1
                                              -EVEL"-DATE    LXEVL:______,,_,__--ATE:____*
REVIEWER:                                                  LEVEL:        .                   DATE:___________
OTHER:O      Z7                                            LEVEL:                             DATE:
STATION:.               6.                                 DATE:_         ____
ANII:         ~l(~          L~.              ~       <A    DATE:                A

COMMONWEALTH EDISON COMPANY                                                                                                Page 20 of 22 Procedure No. NDT-C-30                  Rev. 2                                                                             December, 199.
ULTRASONIC TESTING DATA SHEET                       NDT-DS-C2A
(
STATION/UNIT:            /,A*O//-Z              Z                                                              PAGE:&#xfd;         /      OF PROCEDURE:      NDT-          3       RV. __        DATA SHEET NO.:                ID-     /          --            DATZ:       /0 - Z -    4 CALIBRATION SHEET NO.(S)
ST. BEAM:     ________ANGLE                           BEAM:     axial                ?K (-072             circ.                         -0   -
COMPONENT INSPECTED SYSTEM:              P V,                    WELD #:    *E/-/C:O            -'                WELD TYPE:             7-     -    FL
  ,P P    iZ E:        */                THICKNESS/SCHEDULE:                45.'e-1                 MATERIAL:              4 COMPONENT TEMPERATURE:                      J_
I rp SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                -4 /1                         ANGLE BEAM AXIAL:                                 '/'
COUPLANT/
BATCH #:      U(-T:?A cLJ          _-       S 3?_ S                            ANGLE       BEAM CIRC.:            _        -,        ___
EXAMINATION SCANS Performed                           Indications YES            NO      NO                      YES
: 1) Base Metal Straight Beam                                                         -   t/,
: 2)  Angle Beam-Normal-Against                   Flow                                      /
: 3)  Angle Beam-Normal-With Flow
: 4) Angle Beam-Along Weld-CW
: 5) Angle Beam-Along Weld-CCW F
L    6)  Straight          Beam of Weld                                                      '41A 0
W    7)  Thickness Across Weld & Base Metal                                                          /               /               /
UP STRM             WELD           DN STR ADDITIONAL COMMENTS st4E  ~         ~U    ~      ~      ~    /1 7       7 7/
                                                                               /?-,4t474(14         R~ /10        -   30)          T)~
EXAMINER.                                                              LEVEL:       -L                    DATE:_____________
REVIEWER:________                                    ____              LEVEL:_____                        DATE:______
OTHER:     C,.i               Z*        ---             f-w            LEVEL:                             DATE:       /O3/
STATION:                                                               DATE:        _        _      _
ANII:                                                                  C.4 ATE:           -f    c-

0GE Nuclear Energy Typical design for Top Head to Flange Weld number GEL-1 060-AG REPORT NO.:
Exam coverage is limited due to the flange configuration
          /.~~PAGE:L             Lo:  /                 0%                 450                 60&deg;       Exam Area 66.70%              66.70%              66.70% CW Circ scans
                                         /,p  12 - 9,4                     66.70%              66.70% CCW Circ scans DATE                              100.0%             100.0% Ax Down GE REVIEWED BY         LEVEL 0.0%                0.0% Ax Up 88.90%              91.30% Base Metal 66.70%              64.46%              64.94%
UTILITY REVIEW           DATE Total composite coverage for Weld GEL-1 060-AG = 65.37%
SMAD REVIEW           DATE 60-S 45&deg;S 60 0S

NDT-B-1 Revision 6 December'1 i  1993 Page 4iof     44 FORM NDT-B-l-F1 MAGNETIC PARTICLE EXAMINATION DATA SHEET DATE _e______                   STATION & UNIT         LaSalle Unit2 I L2R07     DAT ASHEET# #
EXAMINER             &xl"A/           (2           777--                         LEVEL
   .....          RSYT
                 ,eactor  Pressure Vessel                                      COMPONENT     GEL-1060-AG SECTION XI EDITION & ADDENDA                    1989 Edition, No Addenda              CODE CLASS Class I SECTION XI CATEGORY             B-A                                            ACCEP TANCE STD. IWB-3510 PROCEDURE # & REVISION              NDT-B-1 Rev. 6                       SKETCH SHE ET USED: YES             NO _
COMMENTS:         Configuration: TH-FL
                              ,*).*-.*.            ,*-x,.,n, q-*              /'-    **
/.
Manufacturer                Model/Type                     S/N Yoke                             ram er                     B300                                   Current AC   X DC Particles                      Magnaflux                                                           Color   G,,AV Black Light                       N/A                       NIA                    NIA B.L.M. Readings                NIA B.L.M. Time Checks               Initial                N/A                  Final           NIA EXAM RESULTS ACCEPT                                                   REJECT REVIEWED BY:
EXAMINER-z                        k          &                    LEVEL:                   DATE:
REVIEWER:                                                         LEVEL:     .             DATE:
OTHER:                                                            LEVEL:                   DATE: /i2-J!--
ITATION:                                                                                 DATE:
ANII:                                                                                      DATE:   I-f--? 7 34,5r~ncnt

COMMONWEALTH EDISON COMPANY                                                                                            C Page 20 of 22 Procedure No.          NDT-C-30       Rev. 2                                                                          December, 1993 ULTRASONIC TESTING DATA SHEET                   NDT-DS-C2A
(
STATION/UNIT:                                          Z=427                                                 PAGE:                    OF PROCEDURE: NDT- C-30               REV.      if     DATA SHEET NO.:          ___DAT_____            _/
CALIBRATION SHEET NO.(S)
ST. BEAM:           C-O-   0        -       ANGLE BEAM:      axial      _         _/           _        circ.      _       _        __     _
COMPONENT INSPECTED SYSTEM:                                     WELD    #:/*.-?-/I                             WELD TYPE:          _       /___"_,_"            _
    -PIPE.!&#xfd;.SIZE:         Z5/           THICKNESS/SCHEDULE:                7   ' 5  A              MATERIAL:                       ,..
4 COMPONENT        TEMPERATURE:          7(of        165659 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:               36     1                  ANGLE BEAM AXIAL:                            ,(-/14 COUPLANT/                                 /                                                                                        .
BATCH #:        df        547           !
* ANGLE BEAM CIRC.:
EXAMINATION SCANS                                                                                            Indications Performed YES            NO     NO                       YES
: 1) Base Metal Straight                Beam                     K                     X
: 2)   Angle Beam-Normal-Against               Flow                           X      d
: 3)   Angle Beam-Normal-With               Flow                              x                _         _/_
: 4)   Angle Beam-Along Weld-CW                                              o
: 5) Angle Beam-Along Weld-CCW L      6)   straight       Beam of Weld                               X 0
W       7) Thickness Across Weld & Base Metsa'                                    x             c/
UP STRM            WELD               DN STR ADDITIONAL COMMENTS l*R/4p/qL               ,"*
t.-0                  T  AE /-&#xa3;/ qWe           /j'z%/6,qr                    .. &#xb6; 7OAJ A?4h'//.i.6EX1iO                     /L'C/ &deg; -7*Z)       /- _./&5                         /6&'< /76J 61,44n1A/IEJ       -A                          700 2i6 L-=VEL :                             DATE:        /0      /1        /&
                                                                         .EVEL:             /_     _          DATE:__________
REVIEWER:
LEVEL:                              DATE:______
AN II:                    ~-

COMMONWEALTH EDISON COMPANY                                                                            Page 20 of 22 Procedure No. NDT-C-30            Rev. 2                                                               December, 1993 ULTRASONIC TESTING DATA SHEET            NDT-DS-C2A STATION/UNIT:              LASALLF              'J/V/T- 3t 2.                                 PAGE:            OF      /
PROCEDURE:      NDT- e-30       REV. __    DATA SHEET NO.:     _         --/_____            DAT*f      /0-8     1-6 CALIBRATION SHEET NO.(S)
ST. BEAM:          A)/4             ANGLE BEAM:    axial        e-                     circ.           -
COMPONENT INSPECTED SYSTEM:          F<PV      *%          WELD #:    LCS-  2-AE                  WELD TYPE:        SH4- FL
  ,,?.Ps SIZE:              -        THICKNESS/SCHEDULE:         7.95/                MATERIAL:         C-S COMPONENT TEMPERATURE:             76 or        6SS8 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              IV/A               ANGLE BEAM AXIAL:                  *6. 0    r3 COUPLANT/
BATCH            ULTRA&EL U:                 IT     c153 Z5               ANGLE BEAM CIRC.:                6. d '0 d EXAMINATION SCANS Performed                      Indications YES         NO     NO                  YES
: 1)  Base Metal Straight Beam                                   X        V/4
     /   \   2)  Angle Beam-Normal-Against          Flow          A
: 3)  Angle Beam-Normal-With Flow                              06         V IA__
(            4)  Angle Beam-Along Weld-CW                         X                  2_
: 5)  Angle Beam-Along Weld-CCW                        ><                 A
       -F L     6)  Straight Beam of Weld                                      K        W/A 0
W     7)  Thickness Across Weld & Base Metal                                      I//A       IAv/             /
UP STRM         WELD        DN STR ADDITIONAL COMMENTS
                                               '95" 5,4 A-Ag 56AW &A*-ii            5ETr/.wU-      7-o   /1b1A/t1TA1A1            A     - 3o%      IL:>
t    o.L 0&S467 VA-P        I'D 1vicL),-Arlolyvs       t5,CO1_4t         PA a)      PARTIAL          EXAA.*I    DUE     TO FLAN,&E"         C0ir-tugA7-j010 EXA                      /8o00-   276-     346f EXAMINER:                   P.LEVEL:                       L             1                DATE:     I-,       ?"6 REVIEWER:                                                  LEVEL:______                   DATE:_________
OTHER: (fA0LEVEL:                                                      -         ~        DATE:   /S~~
STATION                                                    DATE:_____
ANII:DATE:                                            -Z-17___17_

COMMONWEALTH EDISON COMPANY                                                                                    ;:tPage 20 of 22 Procedure No. NDT-C-30 Rev. 2                                                                                    December, 1993 ULTRASONIC TESTING DATA SHEET                NDT-DS-C2A
(
STATION/UNIT:                    IIqSA#L.i       /                                                  PAGE:                OF PROCEDURE: NDT-C            C_      RV.             DATA SHEET NO.:        __       -- /__             DAT1k 46 CALIBRATION SHEET NO.(S)
ST. BEAM:                A//4             ANGLE BEAM: axial               (f-- ___--7           circ.         C-eDr7 COMPONENT INSPECTED SYSTEM:     __        __                   WELD #:       LC -a-AE                       WELD TYPE:   ,.H-"L PIPE; IZE:               A_5_/        THICKNESS/SCHEDULE:          Z       .                MATERIAL:     CS COMPONENT TEMPERATURE:
7          /.*
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              A11.                     ANGLE BEAM AXIAL:              1.V COUPLANT/
BATCH i:           ULr*         E1_    r                                  ANGLE BEAM CIRC.:                        d_,____B EXAMINATION           SCANS                                            Performed                    Indications YES        NO        NO                YES
: 1) Base Metal Straight Beam                                                   /       //
    / \   2)   Angle Beam-Normal-Against                  Flow                                  U-1
: 3)   Angle Beam-Normal-With Flow                                          7--     7*/
: 4)   Angle Beam-Along Weld-CW                                    V                    v
: 5)   Angle Beam-Along Weld-CCW                                   V F
L    6)   Straight Beam of Weld                                                          /
0 W    7)   Thickness Across Weld & Base Metal                                   V/                       IVA             ,
UP STRM       WELD           DN STR ADDITIONAL COMMENTS 01',,  /-.*1b            .t+       1,] A.'9
                                           ,<o-        L-L 3/- I*
                                                                          ,           LCV 64ANTIAL             tX)AMA       ZkIFZ -T.Z&#xfd;C' EXAMINER:                                                         LEVEL:                          DATE:    .__/__/___,
REVIEWER:      __-__-_-_                                      _LEVEL:_            ____            DATE:__________
OTHER:             ,                          _5'/'A.             LEVEL:-=                        DATE:   /       -,96 STAT ION~c*I~K&~-6.DATE:_______
ANII:             'NDATE:                                                     2t-j

Vessel to Flange Weld, LCS-2-AE. This exam was performidifrom 180' to 2700 to SGE 360'. Due to the configuration of the Flange the following coverage was achieved:
(                Nuclear Energy       0o 54,56%
45' 54.56%
600 54.56%
Exam Area CW Circ scans 54.56%                 54.56%     CCWCirc scans 100.0%                 100.0%     Ax Down 0.0%                   0.0%     Ax Up' 62.51%                 66.35%     Base Metal 54.56%               54,32%                 55.09%
Total Composite Coverage = 54.65%
                                         ,60 0S                                  FLANGE 45"S 6001 DATE                 REPORT NO.:
UTILITY REVIEW GE REVIEWED BY    LEVEL   DATE             SMAD REVIEW                       DATE                 PAGE:       O oZ

COMMONWEALTH EDISON COMPANY                                                                                          I..Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                                           December, 1993 ULTRASONIC TESTING DATA SHEET                  NDT-DS-C2A STATION/UNIT:       ZAA1.             c.PAGE:                                                                        z;,       OF   /
PRoCEDURE: NDT- C30              REV. ta. DATA SHEET NO.:             L- (                             DATaE:.          --
CALIBRATION SHEET NO.(S)
ST. BEAM:     C_-____(__e_              ANGLE    BEAM:   axial      _            /____    ...... circ.
CO,[PONENT INSPECTED SYSTEM:       RPV                      WELD i:         1-C_5_-_"-_IA                   WELD TYPE:            iVZ-          .9 PI?*EQsiz                         THICCESS/SCHEDULE:                6.
(0MTERIAL: "                                  C COM14PONENT TEMPERATURE:                          L'     ~?p. iIF SC.AN GAIN CONTROL SETTINGS STRAIGHT BEAM:               4'. 0  we                ANGLE BEAM AXIAL:                         '
COUPLANT /                                                                                                      /
BATCH #:      ULTRAGEL             i:          95325                    ANGLE BEAM CIRC.:                    W14 EXAMINATION     SCANS Performed                           Indications YES         NO           NO                    YES 1 ) Base Metal Straight Beam                                 X           -             X
     / \    2)  Angle Beam-Normal-Against               Flow                       X              N1
: 3)  Angle Beam-Normal-With              Flow                           X*           A114
(,          4)  Angle Beam-Along Weld-CW                               _     _     X               /4
: 5)  Angle Beam-Along Weld-CCW                                          X            11/A L     6)  Straight Beam of Weld                                   x W     7)  Thickness Across Weld             & Base Metal                    X       ....                   I           . NIA UP STRM          WELD          DN STR ADDITIONAL COMMENTS SCANN6D              4 10,1            7T0      JAINrAr1                      0%                 3A CK REFLECTION.
NO     RECORDABLE                    TNDrCAT!OJ)5 0o/       LONG1TrUD-WAL EXAM                        'Art                                LEVEL:      'III                    DATE:         10.7-1?96 REVIEW4ER:                                                      LEVEL:     __I77--                  DATE:          /6712ii2&#xfd;4-OTHER.:                                                         LEVEL:                              DATE: //- oy-7 DATE: 1             /
ANII:                                                           DATE: J          L             i

COMMONWEALTH EDISON COMPANY                                                                                    Page 20 of 22 Procedure No. NDT-C-30             Rev. 2                                                                  December, 1993 ULTRASONIC TESTING DATA SHEET                NDT-DS-C2A STATION/UNIT:              /-A 5ALL5                  vt4r 7                                      PAGES         JIOF PROCEDURE:       NDT-  c-30      REV.      _   DATA SHEET NO.:             IJ-/(G7.                   DATEI       1O 96*,
CALIBRATION SHEET NO.(S)
ST. BEAM:           A)/I4.             ANGLE BEAM: axial                      06______
7        circ.          e --_     __ 7 COMPONENT INSPECTED SYSTEM:          , PV                   WELD #: LC5-.        -'/ViA              WELD TYPE:            /V1_    -   SH
   ,,Pt.,,SZE:         2H.0           THICKNESS/SCHEDULE:            6,    q 91C          MATERIAL:                  5 COMPONENT      TEMPERATURE:         8 *!f     $    f5 B SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:               AJ/V/                 ANGLE BEAM AXIAL:                          8  d.
COUPLANT/
BATCH #:          C-L-TAgA&LL          E      1*3Z5                   ANGLE BEAM CIRC.:                  5_-____
EXAMINATION SCANS Performed                        Indications YES          NO      NO                     YES
: 1) Base Metal Straight             Beam                              X      ,VI__A
      / \   2)   Angle Beam-Normal-Against            Flow                               A4
                                                                                         /A
: 3)   Angle Beam-Normal-With            Flow                                   x
("          4)   Angle Beam-Along Weld-CW F    5)   Angle Beam-Along Weld-CCW L    6)   Straight      Beam of Weld                                      ?<     ,vA._
w    7)   Thickness Across Weld & Base Metal                  _.V_                       A//A                    I  Wv/A UP STRM            WELD         DN STR ADDITIONAL COMMENTS 5 C-AWN  AEOP      /8o    /3Egcrs              /_%V 1        r,  o,,03o         IO IRoLL ORSERVbED         /,P    &-Eo/AhETRY       REio-.'        RE.cofABt&-                  LEVF15.
E    1 NE     -S*   A      E
                                        &#xa3;4M           PE          EV NL            L."u74          A"ZZTEO 26S     FA 9 EXAMINER:                 &#xa3;/-.ZLEVEL:                                        J2DATE:                       J?~~
REVIEWER:-                                                    LEVEL:         _L7__            DATE:______
OTHER:L~4&dL                                                  LEVEL:     ..-2&#xfd;                DATE://    STATION:                                                      DATE:/'
ANII:                                                         DATE: L
((j

COMMONWEALTH EDISON COMPANY                                                                                    Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                                   December, 1993 ULTRASONIC TESTING DATA SHEET                   NDT-DS-C2A STATION/UNIT:                A 11A& Z2                                                             PAGE:         /     OF       7-_
PROCEDURE: NDT-        C30       REV.    ,    DATA SHEET NO.:                      /-I     C--       DATri       /0 -        -7 CALIBRATION SHEET NO.(S)
ST. BEAM:    __        _      __         ANGLE BEAM:       axial                                circ.      (f_-    0_    _ '7 COMPONENT INSPECTED SYSTEM:          RV                           i WELD#:          Cf       1/4     A         WELD TYPE:          //Z -S K,   p;PE ,SIZE.:                      THICKNESS/SCHEDULE:              t.      '"             MATERIAL:     _    2          _S COMPONENT TEMPERATURE:             Aq OF     SS $ l         e e SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:               /V/A                      ANGLE BEAM AXIAL:              6   5,        C COUPLANT/
BATCH #        CCA4TPA        C1*                                       ANGLE BEAM CIRC.:               ( 7(        I*
EXAMINATION SCANS Performed                     Indications YES         NO       NO                YES
: 1) Base Metal Straight Beam                                               X     IV/A
      / \   2)   Angle Beam-Normal-Against               Flow                         X      I//A
: 3)   Angle Beam-Normal-With            Flow                                        X
(        4)   Angle Beam-Along Weld-CW                                  X          -
F
: 5)   Angle Beam-Along Weld-CCW                                 A          -
L    6)   Straight Beam of Weld                                  _                    N/A W    7)   Thickness Across Weld & Base Metal                                   X          //A     I       /A           ///
UP STRM         WELD          DN STR ADDITIONAL COMMENTS 0                  6S
                                   -D         D2 Cr6O M 6r             < ,_o15 0                 6 COD AZL*EL6           4v          s n~ t-         1     v6D~        6 X AM          TlDA6       TO /V/O,1rL E                c),\jF ( AR           T     Ij*
(00A0F EXAMINER:        aj                                            LEVEL:         1?DATE:                      IC-   7-REV IEWER.                                                        E      E~~                    DATE:     /67./2 '14:
OTHER:                                          f4,V,',,       LEVEL:
* DATE:     /-o      -        ..
                                 "STATI*N                           DATE:                   ,,
ANII:                                           ~~~DATE:  ______
* I V/    /

GE Nuclear Energy Typical design for Recirculation (N1) RPV Nozzle Assemblies.
REPORT NO.:
Due to the configuration of Nozzle NiA, weld number LCS-2-NIA examination coverage
              ~~f74CPAGE:__-OF: Z             is as follows:
: 0.                  450                60&deg;      Exam Area 65.42%               65.42%             65.42%   CW Circ scans 65.42%             65.42%   CCW Circ scans GE REVIEWED BY       LEVEL  DATE                                         100.0%   Ax Down 100.0%
0.0%               0.0%   Ax Up 89.22%             93.40%   Base Metal UTILITY REVIEW        DATE                                        .64.85%
65.42%               64.01%
I" Total Composite Coverage = 64.76%
SMAD REVIEW          DATE HALF SCALE 600 450 S

lit COMMONWEALTH EDISON COMPANY                                                                                                Page 20 of 22 Procedure No.           NDT-C-30            Rev.      2                                                                    December, 199 ULTRASONIC TESTING DATA SHEET                     NDT-DS-C2A STATION/UNIT:              ZA*A)E7               /     '                                                    PAGE0,             /      OF    /
PROCEDURE:         NDT-C_30             REV.       _a    DATA SHEET NO.:              - /*          4           DA       :   2       '-fo CALIBRATION SEET NO. (S)
ST. BEAM:    _        --      __               ANGLE BEAM:      axial   --    VIA                     circ.      _        _         _
COMPONENT       INSPECTED SYSTEM:         A'PV                             WELD i:                                   WC'2A)S'TYPE:
                                                                                           "5")WELD
:*;,-,IZE:             251                   THICKNESS/SCHEDULE:              i.q*"             MATERIAL:          _       _     "__           _
COMPONENT TEMPERATURE:                       I(     '-             /&*9 SCAN GAIN CONTROL SETTINGS STRAIGHT          BEAM:                   av               ANGLE BEAM AXIAL:              _             _             _
COUPLANT!                                jj                                                                     ________
BATCH 0          _L"T___A________
_:                             9S345                      ANGLE BEAM CIRC.:
EXAMINATION SCANS Performed                         Indications YES          NO      NO                       YES Base Metal Straight Beam                                                       i                   I 1)
        /   \   2)   Angle Beam-Normal-Against                      Flow                   z       *
: 3)   Angle Beam-Normal-With Flow                                 -        p-         /
(               4)   Angle Beam-Along Weld-CW                                             ,                 _            __
: 5)   Angle Beam-Along Weld-CCW                                              V               _/_
L     6) Straight Beam of Weld w     7)   Thickness Across Weld & Base Metal                                                ,'               -t1',:4        I__'!.4 UP STRM             WELD              DN STR ADDITIONAL COMMENTS 4,-         NeAujJro43/4'Jid D                  70- IUWAArV             Z%              ,lA9bCK 1?UrE Te7?06A Oxhi11NA7'OcAJ            4 1-17E0r6             -r4 utPtif~ *JWL&#xfd;I                R/b           Du~e Tro
          ,pt      X1'gcnfwvA.16                      /e101r/C)A)15 EXAMINER:                                                               LEVEL:       V                  DATE:      lo- 9'          *'
REVIEWER:                                                              LEVEL:       CZr7-               DATE:_ ____z                   __
I. OTHER:      C          *              ,-----                      ,    LEVEL:    -2=                    DATE: /1-0 Y-P STATION: *DATE:_____
ANII:                                                                  DATE:-

COMMONWEALTH EDISON COMPANY                                                                                       Page 20 of 22 Procedure No. NDT-C-30           Roe.       2                                                                -    December,      1993 C                            ULTRASONIC TESTING DATA SHEET                     NDT-DS-C2A STATION/UNIT:         4A S4 41EljNIT_,V2..                                                           PAGE:'          /     OF   /
PROCEDURE: NDT-C-3__           REV.      ___     DATA SHEET NO.:               >/-C/DAI:                                0     CALIBRATION SHEET NO.(S)
ST. BEAM:        A_)_/4-              ANGLE     BEAM:     axial          6-     J2*-         circ.       _      _      __      _
COMPONENT INSPECTED SYSTEM:          APV                   WELD        I:  _C     2- /a43C           WELD TYPE:         /V-SH
  '"I'PI     IZE:     A   -/        THICKNESS/SCHEDULE:                  7. 4.1"             MATERIAL:       LS COMPONENT TEMPERATURE:           1&#xfd;8'".y5-       165$
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:         _             /                    ANGLE BEAM AXIAL:                        0. cB COUPLANT/
BATCH #:        V     ?&-gXqL-   U-    952.3                          j   ANGLE BEAM CIRC.:              b@.OdB EXAMINATION SCANS Performed                     Indications YES        NO      NO                     YES
: 1) Base Metal Straight Beam                                            $       N/,
      / \    2)  Angle Beam-Normal-Against Flow
: 3)  Angle Beam-Normal-With Flow                                                AIJA
: 4) Angle Beam-Along Weld-CW                                                     /<
: 5)  Angle Beam-Along Weld-CCW                                 ><                A F
L    6)  Straight Beam of Weld                                              A       /     _1_A 0
W    7)  Thickness Across Weld & Base Metal                                                           N///            /V 1A UP STRM         WELD             DN STR ADDITIONAL COMMENTS IV 0 REWCDARLA      E 114EI CA71TW5 - 6AWA STT77"/6                       -IAT,yTAv)VEDP        10%o" 30,,o IO RoLL I D 6&fo1\iE7RZ      oi3SERV&k            BELouA      RECOADARLE              LEVELS 95 &deg; SHEA)?
EXAMINER:              q1* 0     . "                               LEVEL:                       DATE:             I      '9 REVIEWER:     _    _      _        -      _          _      _LEVEL:            7                DATE:      //d-       2 OTHER:                                          5   W* .0          LEVEL:     _z     L       . DATE: _           _____
SAII:                     C                                        DATE:
ANII:                                                              DATE:             2S

COMMONWEALTH EDISON COMPANY                                                                                                        Page 20 of 22 Prccedure No. NDT-C-30                           Rev. 2                                                                           December, 1993 ULTRASONIC TESTING DATA SHEET                     NDT-DS-C2A STATION/UNIT:                                LASAi.LF_            / .                                                 PAGE:'           /      OF PROCEDURE:              NDT- CL                REV. _        DATA SHEET NO.:                     -?OC                    DATE:         I*191le CAL:BRAT:ON              SHEET NO.(S)
ST.      BEAM:        _     _     /t)   __             ANGLE    BEAM:     axial          Cf -                     circ.      _       _____
COMPONENT            INSPECTED SYSTEM:              RPV.                            WELD #:       LCSC-,2- 3                       WELD TYPE:              A/Z-SH
.,~L)~   i'PE,:*-KIE:*-              1-1""                THICKNESS/SCHEDULE:             Z     ....
5MATERIAL:                              CS COMPONENT TEMPERATURE:                                    3,          ?FtL SCAN      GAIN CONTROL SETTINGS STRAIGHT BEAM:                      AJ/f                      ANGLE BEAM AXIAL:                           .A1 COUPLANT/
BATCH         *:      aLTZA(L7   '&,*,                                                 ANGLE BEAM CIRC.:
EXAMINATION SCANS Performed                         Indications YES       NO         NO                     YES
: 1)   Base Metal Straight Beam
: 2)   Angle Beam-Normal-Against                       Flow
: 3)   Angle       Beam-Normal-With               Flow                                       A/     _         _        _        _     _
(              4)    Angle Beam-Along Weld-CW,                                                   -              !
: 5)   Angle Beam-Along Weld-CCW L         6)   Straight            Beam of      Weld                         *_40_                   */   I 0
UP STRM           WELD              DN STR ADDITIONAL COMMENTS AJAM- A/MNTh1tAIFD                         to -p20% PS14            Dea XQ & EOM ETAh Q                           8EE0 Ral6                J?9,fz%4W14P            a'eG7 4,o SYEAR                 FAflM.
EXANIA.&#xfd;ER:                                                                     LEVEL:    .YDATE:                            10/76~4 REVIEWER:                                                                       LEVEL:    iZZ                     DATE:        /a.   /2    '5 OTHER:           O      Z                                  l._&#xfd;"V-9zp--         LEVEL: -*                         DATE:      /0
* STAN:0'I:                                                                      DATE:,      9       917 Id ANTI:      _    _    _   _    _     _     _   _  _  _  _    _  _   _    __     DATE:--    __     _   __    _

0 GE Nuclear Energy Typical design for Main Steam ( N3 ) RPV Nozzle Assemblies.
REPORT NO.:
Due to the configuration of Nozzle N3D, weld number LCS-2-N3D examination coverage PAGE:--L OF: -
is as follows:
: 0.                 45'                 60&deg;     Exam Area lX44e,?a 62.15%              62.15%              62.15%  CW Circ scans GE REVIEWED BY         LEVEL  DATE                        62.15%              62.15%  CCW Circ scans 100.0%             100.0%  Ax Down 0.0%               0.0%  Ax Up 84.76%             88.73%   Base Metal UTILITY REVIEW           DATE 62.15%              61.81%              62.60%
Total Composite Coverage = 62.19%
SMAD REVIEW            DATE HALF SCALE
  &0

COMMONWEALTH EDISON COMPANY                                                                                     Page 20 of 22 Procedure No. NDT-C-30            Rev. 2                                                                     December, 199.
ULTRASONIC TESTING DATA SHEET                   NDT-DS-C2A STATION/UNIT:        /4SAI-F        /    .,                                                         PAGE           /       OF     /
PROCEDURE: NDT-      c-30 REV.        2Y       DATA SHEET NO.:             6-        / g/9             DATE: /1--            -A.
CALIBRATION SHEET NO.(S)
ST. BEAM:                    ~         '-C ANGLE      BEAM:   axial   ________ciro.
COMPONENT INSPECTED                                                                                    AiVZZ4 6      4 SYSTEM:      A'PV                     WELD #: Z6            -  A'3a      *       -WELD        TYPE:    *&-         7'.*SW2AZ L W!,PN,*SIZE:     &#xfd;&#xfd;_y_          THICKNESS/SCHEDULE:              Z 14                         MATERIAL:                   '--)     )5&#xfd; COMPONENT TEMPERATURE:          __       "     SW1     /;s5'Y&#xfd;p SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                .00  014&              ANGLE BEAM AXIAL:
BATCH 0:      _V_7',UA,*     E7*                                      ANGLE BEA CIRC.:
EXAMINATION SCANS Performed                         Indications YES             NO       NO                  YES
: 1)  Base Metal Straight Beam
          /\2)  Angle Beam -Normal-Against             Flow                                  -VI
: 3) Angle Beam-Normal-With Flow                                       i-           I            N/
(           4)  Angle Beam-Along Weld-CW                                                                      A F      5)  Angle Beam-Along Weld-CCW                                            -
0L     6)  Straight Beam of Weld                                                        Z.-
: 7) Thickness Across Weld & Base Metal                                   ....                j     ,.
UP STRM       WELD            DN STR ADDITIONAL COMMENTS 5CAA*AED 6Dt.J6      A'l 7-rl        /yAiAT"A1)         go%       rsi$           1AC_<    RFFLEC770, ffXAtAWhA-rlOA' LimrrEo 7Z) UPPE~R _514ELL                            )?)AJ6            OLJE      T-6 COJF&#xfd;1U,?AT4co)         6F      N6TLE.
A1
       ~)g    ZE     OTDAeA I                    dL5*_,_,
7LADJC EXAMINER:       A~i'24~.i7LEVEL:                                               .2z               DATE:    10- 9-36 REVIEWER:                                                      LEVEL:      _         _       _   DATE:     /0,/    2 ,
* OTHER:          &              -              Je"f,,sO         LEVEL:_     ________              DATE:    //-         -,
STATION:                                                       DATE:__ I_______
ANII:     _                                                    DATE:     2--0-L        It7

COMMONWEALTH EDISON COMPANY                                                                                                  Page 20 of 22 Procedure No. NDT-C-30                       Rev.      2                                                                     December, 199.
(                                  ULTRASONIC TESTING DATA SHEET                        NDT-DS-C2A STATION/UNIT:                  A          /-IL                    u/V '-   q   2--                              PAGEt.J               OF    /
PROCEDURE: NDT- r--3                    REV.        2. DATA SHEET NO.:"                   9/1                  DAfT:         161- 9c CALIBRATION SHEET NO.(S)
ST. BEAM:      _________                            ANGLE     BEAM:    axial  _            -- ____          circ.       C-0        75-COMPONENT INSPECTED SYSTEM:              ApV                           WELD #:          Z 65        N-2-A'3           WELD TYPE:       /V   2- SH
  '*"Y*S*ZE:        ~2*-/                     THICKNESS/SCHEDULE:                2 L     &#xa3;                MATERIAL:        CS COMPONENT TEMPERATURE:                                c   r-p  16 r SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                        A//4-                   ANGLE BEAM AXIAL:                 .            d.1O3J COUPLANT/
BATCH #:            )LTiZA 6-EL                          53**5                   ANGLE BEAM CIRC.:                            g EXAMINATION SCANS Performed                         Indications YES            NO       NO                 YES
: 1) Base Metal Straight Beam                                                                   ,VIA K                                       1
: 2)   Angle Beam-Normal-Against                          Flow
: 3)   Angle Beam-Normal-With Flow                                                    2          A
: 4)   Angle Beam-Along Weld-CW                                                                  >e
: 5)   Angle Beam-Along Weld-CCW L    6)   Straight           Beam of Weld                                                   >_     V                 _____
0 W    7) Thickness Across Weld & Base Metal                                                           ,V/A          ,W/A             'w/A' UP STRM          WELD            DN STR ADDITIONAL COMMENTS IP       oF.'*1E7,,Y O5,,SFgVEZ                     /.ELOu-       P1EC.4og)A'LE LEVELS
                                                                      .SHEAR EXAMINER:   _________________LEVEL:____________                                                                              q-TE fJ4 REVIEWER:         _         _         _         --              _         LEVEL:           L               DATE:      dCn,//.,         .
OTHER:                                                                    LEVEL:                           DATE:
STATION:c                        e                                        DATE:_______
IANII:                                                                      DATE:  __7__-It__7

COMMONWEALTH EDISON COMPANY                                                                                    Page 20 of 22 Prccedure No. NDT-C-30                    Rev. 2                                                               December, 1993 ULTRASONIC TESTING DATA SHEET               NDT-DS-C2A STATION/UNIT:                            LAS*ALLE                                                    PAGE:~j           OF     /
PROCEDURE:           NDT-C-3p          REV. _,     DATA SHEET NO.:            L-171/f__                 DATE:     &t/9/!
CAL BRAT:ON SHEET NO.(S)
ST. BEAM:      ___           ____ANGLE            BEAM:  axial         C-7__-___7(_          circ._______
COMIPONENT         INSPECTED SYSTEM:              APV                      WELD 0:     LCS--       AJ.D -         WELD TYPE:          A4Z -SH
... ,P," 2 SZE:             o,,/
coMPoNE            TEMPERTR:
THICKNESS/SCHEDULE:       7.                      MATERIAL:       CS
                                                                                                            .S SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:               Al/A;'                 ANGLE B3EAM AXIAL:
COUPLANT/                                                                 ANGLE BEAM CIRC.:
BATCH #:            I.i-T&.ew     L                                        AA EXAMINATION SCANS Performed                      Indications YES         NO       NO                 YES
: 1) Base Metal Straight Beam                                           . ...,'   ,i'.-
     / \     2)    Angle Beam-Normal-Against              Flow                       -
: 3)    Angle Beam-Normal-With             Flow                       .e        *!*..
: 4)     Angle Beam-Along Weld-CW                                          -
: 5)    Angle Beam-Along Weld-CCW                                         -
L     6)    Straight Beam of Weld
: 7)    Thickness Across Weld & Base Metal                _/_4444                                  l /#,
UP STEM         WELD         DN ST ADDITIONAL COMMENTS 4APX-_AfrrN41                  D       10 M 901 9           X          R5LL, t7') C75MEV                6B:5Qi)21j5O      9CL42W RE      490ARLE           L sticl-S.
iA2 ExAMr;E:         ~LEVEL:_______                                             DATE_______
L EVE     L _      _ _ _ _ DATE .: A */          2.
RE VIHER :
OjTHER:        .                                                LEVEL: .DATE:                             /."-Y-?P STAT'ON:                                                       DATE:____
ANII    _______________                                        DATE-       2~- )--g

GE NuclearEnergy Typical design for Main Steam ( N3) RPV Nozzle Assemblies.
REPORT NO.:
Due to the configuration of Nozzle N3C, weld number LCS-2-N3C examination coverage b-/_          PAGE:t__OF:   /                is as follows:
: 0.                  45&deg;                600     Exam Area
                                          ~-/0-/Z -14, 62.15%               62.15%             62.15% CW Circ scans GE REVIEWED BY          LEVI Li    DATE                           62.15%             62.15% CCW Circ scans 100.0%             100.0% Ax Down 0.0%               0.0% Ax Up 84.76%             88.73% Base Metal
           -    UTILITY REVIEW               DATE      62.15%               61.81%             62.60%
Total Composite Coverage = 62.19%
SMAD REVIEW                 DATE HALF SCALE

CON.MC.7,N'EALTH EDISON COMPANY                                                                             *.Page 20 of 22 Prccedure No. NDT-C-30                 Rev. 2                                                              "December,           1993 ULTRASONIC TESTING DATA SHEET                 NDT-DS-C2A
(
STAT:!N,'UNIT:               LASALLE-i           UNIT t                                                PAGE:          /        OF   /
PROCC:UPZ:         NDT-C-3__       REV. 2     DATA SHEET NO.:             b-       0oi f4          DATE:      10-J12-1 cAL:FAT:ON SHEET NO.(S)
ST.       BE:A.:       (2  - 0?   4         ANGLE BEAM:      axial               )   *4-        circ.                    /
CO'UPOMNEN'       INSPECTED SYST-M:              RPV                  WELD i:       .-C-5"2-A17                 WELD TYPE:           /VA - SP
    .....-          ':*       *-I    "      THICKNESS/SCHEDULE:           3.2"                  MATERIAL:          CS COM-C.:E.NT TEMPERATURE:             .LfE
* I J* 58 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:           57. z                       ANGLE BEAM AXIAL:                A/1A COUPL~a;T/
BATCH t:                   -)oIOTFLH                                     ANGLE    BEAM     CIRC.:   _        _/_
EXAMINATION         SCANS Performed                     Indications YES          NO      NO                 YES I)  Base   Metal  Straight      Beam                                      ____
           /   \     2)  Angle Beam-Normal-Against            Flow                      v        /,4
: 3)  Angle    Beam-Normal-With        Flow            ___//d                     I C-                   4) Angle Beam-Along Weld-CW
: 5) Angle Beam-Along Weld-CCW                                            IVI/4 F                 if L        6) Straight Beam of Weld W        7) Thickness Across Weld Q Base Heza.T UP STRM         WELD             ON STR ADDITGONA.L COMMENTS S-AA,       A/A SErr/-,,6- MAl mSTA/NE.
                             .-                                        8O.%        ,s14     BAcx /*L-fT-o, DATE:      IO-/"-C REV:                                                                                         DATE:     /        -f/._ Y
                                                                       ~~LEVEL:____             ___
DATE:_________
STA_
CAT-

COMMONWEALTH EDISON COMPANY                                                                                           Page 20 of 22 Procedure No. NDT-C-30                    Rev. 2                                                                    December, 1993 ULTRASONIC      TESTING DATA SHEET          NDT-DS-C2A STATION/UNIT:                      L A*L-5                  uNr I,                                         PAGE[-       /     OF.  /
PROC*DURF:           NDT- C-30       REV.      . DATA SHEET NO.:           [         20/0-    L3         DATE:      !0-12-'?6 CALIBRATION SHEET NO.(S)
ST. BEAM:              /t2,I                ANGLE BEAM:    axial        C     -        Z'7          circ. __        -_____
COMPONENT INSPECTED SYSTEM:                   $PV                 WELD 0:       -CSz-IAV7                      WELD TYPE:          /Z-        S/1
   .... TPE"S IZ:                  -/         THICKNESS/SCHEDULE:                3.622                MATERIAL:            CS COMPONENT TEMPERATURE:                     76 0 p SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:         _     1A N1,                     ANGLE BEAM AXIAL:                     6 05     0 BATCH #:    NT/FE                                      t*Q5*5               ANGLE BEAM CIRC.:                    6o0.____
EXAMINATION SCANS Performed                         Indications YES          NO        NO                   YES i)     Base Metal Straight            Beam                                         f/A/
1
          / \     2)     Angle Beam-Normal-Against              Flow                                   W"
: 3)     Angle    Beam-Normal-With         Flow               _4                 /&#xb6;/        _
3/4.                4) Angle Beam-Along Weld-CW
: 5)     Angle Beam-Along          Weld-CCW                                            7""
F L      6)     Straight Beam of Weld                                               /       f/A 0
W      7)     Thickness Across Weld & Base Metal UP STRM          WELD         DN STR ADDITIONAL COMMENTS AiR)       5'0*   5/IF7A' S CA N          SF7-7-/1/16                MA/)7141IAIAIE4         /oZ - 3,0                /)o Ic      L[
(0) NO EXAMIWAATI Oe/                        DL)'FQ           NO R -a -
Al                        Co~
01V       16URALZOv XAM,1 rlE R:                                                     LEVEL:                ~            DATE:      10-12-76 REVhrWER:                                                           LEVEL:______                       DATE:_______
OR,: -          .    "'                                f            LEVEL:
* DATE:     /10-1-'-
S  A   1-  rO:
DATE:  _L_1_   ',__
A';
I3/4                                                             DATE :3!

COMMONWEALTH EDISON COMPANY                                                                                       Page 20 of 22 Procedure No.             fDT-C-30 Rev.           2                                                              December, 1993 ULTRASONIC TESTING DATA SHEET                 NDT-DS-C2A
(
STATION/UNIT:                    I A        LLC          uA/,T-r o                                   PAGE::._;         OF   /
PROCEDURF:         NDT-    C-30      REV.      X_     DATA SHEET NO.:                    2oi o- C.        DA*:        /o-I2-gl CALIBRATION          SHEET NO.(S)
ST. BEAM:              0/A                 ANGLE BEAM: axial               C-,V2Y             circ. _        -_    _   _
COMPONENT INSPECTED SYSTEM:             APy                       WELD #:         LCS-ZLA/7                 WELD TYPE:      A'?- 5/4 P PE&#xa2;'SIIZE:        __     _--"        THICKNESS/SCHEDULE:                3. 62"            MATERIAL:          C-5 COMPONENT TEMPERATURE:                    74        s   a*Sc SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                  /V                      ANGLE BEAM AXIAL:             45. 6A COUPLANT/
BATCH *:                5o/v*o7      .- ,  .-      s/e.56                    ANGLE BEAM CIRC.:             65".
EXAMINATION           SCANS Performed                  Indications YES        NO     NO                 YES 1 ) Base Metal Straight Beam                                              V     '/A/
    / \       2)   Angle Beam-Normal-Against                 Flow
: 3)   Angle Beam-Normal-With               Flow                         9       ,4//
: 4)   Angle Beam-Along Weld-CW                                  V/
: 5)   Angle Beam-Along Weld-CCW F
L      6)   Straight Beam of Weld                                                ,    ,&1/4 W      7)   Thickness Across Weld & Base Metal                                  .-                       #
UP STRM       WELD         DN STR ADDITIONAL COMMENTS
         -SC/AJ 6-,*,,              5E-77AI&V                /,IT-/A4AZ /RoO-L3                      /1/oLL D Alo EAxM1VAT7, 70,&/,                       PVu      7-0o  Al,Z aa    Z A-- 601.1F16-v,7-/0A EXAM.INER:            L'                                             LEVEL:                     DATE:       16 -/2-q6
   ? -.    -EER: ,                                                      LEVEL:   __                DATE:           ,
DATEE:
DATE:     JL/-d

GE Nuclear Energy Typical design for Top Head Nozzle LCS-2-N7 Exam coverage is limited due to the nozzle configuration REPORT NO.:
b  2LPAGE:.        OF: J       0.
62.75%
450 62.75%
600        Exam Area 62.75% CW Circ scans 62.75%             62.75% CCW Circ scans 100.0%              100.0% Ax Down LEVEL DATE                       0.0%                0.0% Ax Up GE REVIEWED BY 90.20%              94.30% Base Metal 62.75%              63.14%             63.96%
UTILITY REVIEW          AT Total composite coverage for Weld LCS-2-N7 = 63.28%
SMAD REVIEW          DATE

3.
COMMONWEALTH EDISON COMPANY                                                                                               Page 20 of 22 Prccedure No. NDT-C-30 Rev.                       2                                                                  .... December, 1993 ULTRASONIC TESTING DATA SKEET                            NDT-DS-C2A                       i?-
STATION/UNIT:            ZASALL-                        UNlTIT                                             PAGE: I         / OF PROCZE'IUPR:     NDT- C-3 0         REV.2               DATA SHEET NO.:             4             ;Z'         DATit        10 12 -q CAL:BRAT:ON SHEET NO.(S)
ST. BEAM:          (2 - 'D      '             ANGLE BEAM:             axial        L,,
                                                                                        /7     -           circ.
COMPONENT INSPECTED SYSTEM:             ,qpV                      WELD #:          L.S-'-/'         ,8           WELD TYPE:          /VZ-SH
        -:z     :      *SI "            THICKNESS/SCHEDULE:                     3. 6;"               MATERIAL:         C 5 COMPONENT TEMPERATURE:                  ?1, o            t 1I4'_*  ?
SCA!N   GAIN CONTROL SETTINGS STRAIGHT       BEAM:              5-7?    -dB                  ANGLE BEAM AXIAL:          ___         _    _   _
COUPLANT     /          11411nA-rn<x BATCH #:                  ovo                          )"*5     "ANGLE                      REAM CIRC.:            1/14 EXAMINATION SCANS Performed                    Indicationx YES        NO       NO                 YES I)    Base Metal Straight Beam                                         7             .,
    / \     2)   Angle Beam-Normal-Against                       Flow                                w/
: 3)    Angle Beam-Normal-With                    Flow                                       /
C           4)    Angle Beam-Along Weld-CW-                                                 7        /
: 5)    Angle Beam-Along Weld-CCW                                                         A11, L     6) Straight       Beam of Weld                                                  -
0 W     7)    Thickness Across Weld & Base Metal UP STRM       WELD          DN STR ADDITIONAL COMMENTS Ai    S           V&         MAItT-A/AEP                  86       clt/       8Ac& KFCLgCm-g ACAA' LEVEL:.                       DATE:     12.-,
RzV:-LEVEL:                                                            ilL-             DATE:      /6'/0   '    ,
                              - ~       ~                 S"VAW~              LEVEL:_             ___       D3ATE:/Q           9y
______________________DATE:_                                      ____

COMMONWEALTH EDISON COMPANY                                                                                             Page 20 of 22 Procedure No. NDT-C-30                Rev. 2                                                                            December, 1993 ULTRASONIC TESTING DATA SHEET                     NDT-DS-C2A STATION/UNIT:                             QLNT-LA 5ALL*/                 ir          2>-.                               PAGE t"        /      OF PROCrDURF:        NDT- C-3         REV.     .2-     DATA SHEET NO.:                                   13-)0,/3 DAT-:       io-iZ-gq CALIBRATION SHEET NO.(S)
ST. BEAM:          A./IA                 ANGLE BEAM:            axial   _        --      __7        circ.                 z-5 F7 COMPONENT INSPECTED SYSTEM:            RPV                     WELD #:        IC5 - Z-A/8                       WELD TYPE:          Ala-511 WV4'! 1
        ...ZE"SIZE :         2              THICKNESS/SCHEDULE:                   .                       MATERIAL:         C5 COMPONENT TEMPERATURE:                 6 7* &deg;fr          !  5-8 78 SCAN GAIN        CONTROL SETTINGS STRAIGHT       BEAM:            f/AV                       ANGLE BEAM AXIAL:                        0,    0 JS COUPLANT/
BATCH #:            6OMOTE-do    ?      -'W                                   ANGLE BEAM CIRC.:                     (0       C)8d d EXAMINATION SCANS Performed                        Indications YES           NO        NO                 YES
                   - ) Base Metal Straight              Beam                                     7       v1A
: 2)   Angle Beam-Normal-Against                 Flow
: 3)   Angle Beam-Normal-With               Flow
(              4)   Angle Beam-Along Weld-CW
: 5)   Angle Beam-Along Weld-CCW                                   7                      7 F
L      6)   Straight Beam of Weld                                                   7        /./4 W      7)   Thickness      Across Weld & Base Metal                                                                A UP STRM         WELD          DN STR ADDITIONAL COMMENTS
                                                   /*g !            q5 o s 5CAA) &A)Jy SET/7-1/6                          /,41/A/     T7-AI4  E      /o4-o%                  /39         1e-L Q)/V      0   EXw&          -UWATI  01V       PCUC- TO             A1o?.R1-F 60 1C'1                        A-776A!
EXMNER:                c~LEVEL:                                           _______DATE:                              J~~
REVIEWER :                                                            LEVEL:           L               DATE:      /6.    /5-2Y AT; i Z :      6       *.,*i ]                          */            DAT:           -/7'-LEVEL:D DATE:
AUI        ~      ~        ~       >-.A                               DATE:             /r

COMMONWEALTH EDISON COMPANY                                                                                        Page 20 of 22 Procedure No. NDT-C-30           Rev. 2                                                                         December,          1993 ULTRASONIC TESTING DATA SHEET                  NDT-DS-C2A STATION/UNIT:           LA5A/.-' I'N7-L         VA'       4=*- ;2                                      PAGE.-&#xfd;_       /        OF   /
PROCEDURE: NDT- C-30          REV. 2_      DATA SHEET NO.:                   -2c             C2          DA4i:       0. 1-2-gZ CALIBRATION SHEET NO.(S)
ST. BEAM:         )//A            ANGLE       BEAM:  axial                           7--____   circ.      _         -_f_
COMPONENT INSPECTED SYSTEM:          RPv                 WELD           LS2-1:          /VL3               WELD TYPE:             _  /V  _        _/-/
THICKNESS/SCHEDULE:                 3. 2"                  MATERIAL:           C.5 COMPONENT TEMPERATURE:            76 '.        `&deg;      B ,
SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              '/VA                     ANGLE BEAM AXIAL:                       65      6 ,R COUPLANT/
BATCH #:         501ONOF6,      It    11714                           ANGLE      BEAM CIRC.:                  65.6 1d6 EXAMINATION SCANS Performed                            Indications YES        NO           NO                     YES i) Base Metal Straight Beam                                                    NIA
: 2)  Angle Beam-Normal-Against            Flow             -                  I    /
: 3)  Angle  Beam-Normal-With         Flow                       6  v-'          AIA
: 4)  Angle  Beam-Along Weld-CW                             v7                     7
: 5)  Angle Beam-Along Weld-CCW                             V11 F
L      6)  Straight Beam of Weld                                                      1V1,4 0--
W      7)  Thickness Across Weld & Base Metai                                                                           _
UP STRM            WELD              DN STR ADDITIONAL COMMENTS
                                    /VAg; SCAN      &A*161    5F7-7,/n6-        /1fIiy7TAN-I         D          %10%-301%            ID       90LL-SAV O   EXAmINiATIOAN          Dv          7-    N2       "a,-     C..l,,,6-uZ,4.
EXAM INIER:      S4     r..L                                  LEVEL:            'IT-_           . DATE:        lO-/;Z-        9*
REV: E WE                                                     LEVEL:    _7_7                      DATE:        /*)''             -
OTHER:                                         fpO            LEVEL:             ?                DATE:      ro3/-9*,
STA:_ON-:6:-;                                                 OATE: _____"-_i               __
AN I:,                                            &#xfd;v&#xfd;3DATE:             3 -174'

GE NuclearEnergy Typical design for Top Head Nozzle LCS-2-N8 Exam coverage is limited due to the nozzle configuration REPORT NO.:
____o         PAGE:  / OF:          0o 63.92%
45" 63.92%
60, 63.92%
Exam Area CW Circ scans 63.92%              63.92%    CCW Circ scans 100.0%             100.0%    Ax Down 0.0%                0.0%    Ax Up GE REVIEWED BY          LEVEL DATE 91.45%             94.86%    Base Metal 63.92%              63.86%              64.54%
UTILITY REVIEW          DATE Total composite coverage for Weld LCS-2-N8 = 64.10%
SMAD REVIEW            DATE 45 0 S

COMMONWEALTH EDISON COMPANY                                                                           Page-20 of 22 Rev. 2                                                           December, 19S Procedure No. NDT-C-30
(                            ULTRASONIC TESTING DATA sETNDT-Ds-C2A STATION/UNIT:                                                                             PG.5A PAGI               OiF     /
PROCEDURE:      NDT-    C_     REV.      .g    DATA SHEET NO.:    _       -__    ..__,_      DATE:          2o-f:2-1 CALIBRATION      SHEET NO.($)
ST. BEAM:      (d-    10               ANGLE BEAM: axial          ,i/4               circ.         /_.//4-/
COMPONENT      INSPECTED
  ,SXSTEM:           :PV                    WELD 1: L_.C   -. ?-NIOA             WELD TYPE:       AVZ-         /7-PIPE SIZE:        &#xfd;IC             THICKNESS/SCHEDULE-        e.  *"               MATERIAL:     C5 0     WA COMPONENT TEMPERATURE:            -7e          / 66 7.23 SCAN GAIN CONTROL SETTINGS STRAIGHT     BEAM:                              ANGLE     BEAM AXIAL:     _      _     _/A COUPLANT/                                                        ANGLE BEAM CIRC.:/A BATCH *:       u A~Jr7A &C6L f     953 ;!SAIA_
EXAMINATION SCANS Performed                  Indications YES        NO     NO                 YES
: 1)  Base Metal     Straight        Beam                               ____
      / \    2)  Angle Beam-Normal-Against            Flow                         NIA
: 3)  Angle Beam-Normal-With Flow                                X      A1/A
: 4)  Angle Beam-Along Weld-CW                                    X     A
: 5)  Angle Beam-Along Weld-CCW                                 ,        VI F-L     6)  Straight     Beam of Weld                          X    '
W    7) Thickness Across Weld Q Base Metal                          I           A/        I/VA           A//A UP STRM       WELD          ON STR ADDITIONAL COMMENTS
                           -SCAtJ J3         Ref(C-c-r-S    O     ,AIL.)%
A/O      ?EC-Co-<ABLE           /Aj-D1CA,-tCtJ$
0' L_      eN     ,-D,       AL EXAMINER: --                                              LEVEL:______                 DATE:   /________
REVIEWER:_______________                                  LEVEL:    Z7ZZDATE:_______
OTHER:     CA--4             ---                          LEVEL:_________              DATE:/1C        -
STAT ION.<2::       .-                                    DATE: 1_________
ANI11:                                                    DATE:    ti-91 1:

COMMONWEALTH EDISON COMPANY                                                                                              Page 20 of 2 Procedure No. NDT-C-30 Rev.                 2                                                                            December, 19
(                          ULTRASONIC TESTING DATA SHEET                        NDT-DS-C2A STATION/UNIT:       ZAS,4LL1E_                                                                              AE4O PROCEDURE:    NDT-e30          REv. t.       DATA SHEET NO.:                         -1       8           DATE:       __".__'___
CALIBRATION SHEET NO.(S)
ST. BEAM:          4) 64.             ANGLE BEA*: axial                                              cir. c-     C      /0 7 COMPONENT INSPECTED ST*#TEM:      /PV                     WELD 0-            2CS-N.-W/IOA                       WELD TYPE:       ,,_Z. _            _      _ _
PIPE SIZE:       4'0             THICKNESS/SCHEDULE:                 6'g/"'                    MATERIAL:            CfS COMPONENT TEMPERATURE:             ZF           S/V /*5?..3 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:        _       ______                        ANGLE BEAM AXIAL:                  (..      ( d4 COUPLANT/                                                                    A             B      C.                       Ole BATCH if:     ALTRAGEL          tt,        ~9S3-2S                            NLEM5RC:______
EXAMINATION     SCANS Performed                          Indications YES             NO     NO                      YES
: 1) Base Metal Straight Beam                                               II
: 2)  Angle Beam-Normal-Against                  Flow               .                   77
: 3) Angle Beam-Normal-With                Flow
(
: 4)  Angle Beam-Along Weld-CW L
5) 6)
Anile Beam-Along Weld-CCW Straight Beam of Weld                                                     j 7,/*  _
w    7)  Thickness Across Weld & Base Metai                        _
4- A UP STRM             WELD             DN STR ADDITIONAL COMMENTS
       .V'RX 5-          .0.                                                                                  RD,44tE-L~eVCIf.5.
0     A)VE-rAvj
          ~i                 fLICt6  7Z)     100"46I-7 CV         5 2#t)  (/CeR4T/10m 415 0   6HE       EXA M EXAMINER:             I _        &#xfd;zLEVEL:-                                                            DATE: A0_-__2:!r               __q REVIEWER:                                                         LEVEL:            4Z1               DATE: ____2              ._
OTHER:         -                                   ,.e,'          LEVEL:.                             DATE: /C-'-
sTAT:O1,:                                                         D*DATE:   _,__-___
ADATE:                  q-01-11)

COMMONWEALTH EDISON COMPANY                                                                                    Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                                   December, 1993 ULTRASONIC TESTING DATA SHEET                NDT-DS-C2A
(
STATION/UNIT:               LA 541-E                uA417- f                                       PAGE I        /V      OF   /
PROCEDURE:       NDT-     C-30    REV. 2.      DATA SHEET NO.:                                  _DATE:            /jo*2S*-176 CALIBRATION SHEET NO.(S)
ST. BEAM:                 IA_          ANGLE   BEAM:  axial          C    -                 circ.             -
COMPONENT INSPECTED SYSTEM:                  PV             WELD #:     kCS.1-fL-          i0           WELD TYPE:          /V       -    5H
   &#xfd;PIfE SIZE:           /O           THICKNESS/SCHEDULE:             6.99                MATERIAL:            C-COMPONENT TEMPERATURE:               788     v 16572-3 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:              11,                    ANGLE BEAM AXIAL:
* e"    q Js COUPLANT/                                                              A BATCH #:             ()ITgLr4E - 1S
* 2                ANGLE BEAM CIRC.:             _   _  _.        _B EXAMINATION SCANS Performed                        Indications YES            NO    NO                     YES
: 1) Base Metal Straight           Beam                                       Al/A
     / I\   2)  Angle Beam-Normal-Against              Flow            7'
: 3)  Angle Beam-Normal-With             Flow                                  Al/
VIA
: 4)  Angle Beam-Along Weld-CW
: 5)  Angle Beam-Along Weld-CCW                             .,-
F L    6)  Straight       Beam of Weld                                               VIA// _
0 W     7)  Thickness Across Weld & Base Metal                                                         A'/A 411            WI/A UP STRM           WELD            DN STR ADDITIONAL COMMENTS A/RI        -    (6)"   sA.i~
4.-$      G,'-1F7-/                OSF2VEP 8z-oj                            eE*      o/,q r        L9- LEVELS.
SeA.4 G-A.)            5rn7-7wv6-s        IjA*NTA        JEIp          i/0 -- Zo/o J-p              oL.o.
I        ~,, ,~
LEVEL:                          DATE-      /"     ZS'-%
REV7EWER:                                                      LEVEL:                          DATE:      10__    .___,
OTHER:       ~                1                                LEVEL:                          DATE:     __-_0______
DATE:__________
IA-N:                                                           DATE:      /r(1

GE NuclearEnergy Typical design for CRD Nozzle LCS-2-N1 OA Exam coverage is limited due to the nozzle configuration REPORT NO.:
I)L~~     PAGEd- OF:
0o 70.21%
45.
70.21%
60&deg; 70.21%
Exam Area CW Circ scans 70.21%             70.21% CCW Circ scans 100.0%              100.0% Ax Down
                                        /02-27-,;P                       0.0%                0.0% Ax Up GE REVIEWED BY       LEVEL     DATE                          92.65%             95.96% Base Metal 70.21%              66.61%             67.27%
UTILITY REVIEW             DATE     Total composite coverage for Weld LCS-2-N10A = 68.04%
442Z_ //- 0   -7V SMAD REVIEW              DATE Half Scale i,
60O 45&deg; S

COMMONWEALTH EDISON COMPANY                                                                                            ,Page 20 of 22 Prccedure No. NDT-C-30                   Rev. 2                                                                  :JDecember, 1993 ULTRASONIC TESTING DATA SHEET                      NDT-DS-C2A
(
STATION/UNIT:                  L-A sAL          -           L     IVT-  *r   2    .                      PAGE:      j-         OF PROCEDURE:    NDT-C-3_               REV.-___         DATA SHEET NO.:            *-2C)           F-           DATi:          -
CAL:BRAT:ON SHEET NO.(S)
ST. SEAM-        C         D2        /.       ANGLE      BEAM:      axial           ,t//z'&#xfd;-          circ.      _______
CO:UPONENT INSPECTED SYSTEM:          /)PV                       WELD #:           L-CS- 2-VNIB              WELD TYPE:             A ai        5/9
                      . Cl                   THICKNESS/SCHEDULE:               3. 62"              MATERIAL:                C5 COXPONENT TEMPERATURE:                   "                  s-s 78 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                    5     2 dtE                 ANGLE BEAM AXIAL:             _        A/_A COUPLANT/               le"jix BATCH                   o: IO/7--cN  tC           /      s                    ANGLE SEAM CIRC.:                   1V1,4 EXAMINATION SCANS Performed                      Indications YES       NO       NO                      YES
: 1) Base Metal Straight Beam                                                           I--,4'
       / \    2)  Angle Beam-Normal-Against                     Flow                              /V/A
: 3)  Angle Beam-Normal-With                    Flow                                  NIA C..          4)  Angle Beam-Along Weld-CWA F     5)  Angle Beam-Along Weld-CCW                                                      A/IA L     6)  Straight Beam of Weld W     7)  Thickness          Across Weld & Base Metal UP STR.M           WELD       IDN STRJ
                                                                                                                                          }A ADDITIONAL COMMENTS Scf4^ C-AA) 5E,,/,AV6                      /               lTVEb o"IA        80% FSH          4?Acie
           -'*E:/         _                    .         -LEVEL:                               .           DATE:      /O - I)-X a   :zWLEVEL:                                                      .i277               DATE:_            _____
y'~   n:     C 9~,7~4~                       J>~'9~'            LEVEL:-ZAT: 73                                      7 Coe.                                                                                    DAEATE:_____
____________________                       f44&__     DATE:    3?~

COMMONWEALTH EDISON COMPANY                                                                                     Page 20 of 22 Procedure No. NDT-C-30                  Rev. 2                                                              December, 199.
ULTRASONIC TESTING DATA SHEET                NDT-DS-C2A STATION/UNIT:                        LASALL                      A '/i/7-rlp-                       PAGEI;        /     OF    (
PROCDURE:          NDT- C-30          REV. -2         DATA SHEET NO.:              -                   DAT,        IQJ-12-L6 CALIBRATION SHEET NO.(S)
ST. BEAM:            A))14                  ANGLE BEAM:     axial                             circ.       (        o &#xfd; 7 COMPONENT INSPECTED SYSTEM:              RpV                       WELD #:     LCS-2-A118                   WELD TYPE:       /V     - SH
 .I*"*'SIZE      :     */                THICKNESS/SCHEDULE:            3. 2"             MATERIAL:       C-COMPONENT TEMPERATURE:                  -kf         4P     58 78 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:                  /1/A                  ANGLE     BEAM AXIAL:            6o.o0 J/
COUPLANT/                                                                  ANL       B BATCH #:             50-JOT*-CH              #                            ANGLE BEAM CIRC. :         __          .___
-EXAMINATION          SCANS Performed                    Indications YES        NO        NO               YES
: 1) Base Metal Straight Beam                                           V       V/I
    / \       2) Angle Beam-Normal-Against                 Flow          V",
: 3) Angle Beam-Normal-With Flow                                   C            N$ A
: 4) Angle Beam-Along Weld-CW                              77
: 5) Angle Beam-Along Weld-CCW                                7 F
L        6) Straight Beam of Weld                                               -      ,wq 0                                                                                                   'I             ---
W        7) Thickness Across Weld & Base Metal UP STRM        WELD         DN STR ADDITIONAL COMMENTS AJ)R         ~     5   d/~
S-AcA         &AjV SFT7-T-J)A6              MIA/AITA/I&#xa3;)       I0%"- 36%                Ii) ROLL Al
            /nO    EXAM I IJATWA/                 DuE Tt          I'40?-LE C0AJ/PC..fZATION EXAMINER:          L                 a                            LEVEL:       J*               DATE:_,_-,_-__
REVIEWER:                                                         LEVEL:             -          DATE: /142 /,T-OTHER:                  g l-l...---                    J,"-  V    LEVEL:                        DATE: /9      -3/1 -,9 ANI::                     -         ',<7 *_.-- -- _       6,       DATE:    >-!        ,)

COMMONWEALTH EDISON COMPANY                                                                         Page 20 of 22 Procedure No. NDT-C-30              Rev. 2                                                          December, 1993 ULTRASONIC TESTING DATA SHEET             NDT-DS-C2A STATION/UNIT:             LA6ALLAE            U IVI       2                              PAGE       ]      OF PROCEDURE-       NDT-    3-0    REV. 2-   DATA SHEET NO.:         D-       :=1,3 C. DATi:       /2-2-.
CALIBRATION SHEET NO.(S)
ST. BEAM:           A64                ANGLE BEAM: axial         (         9'2       circ.      (2-6 COMPONENT INSPECTED SYSTEM:        RPy                     WELD #:      LC.S-2-AiIB             WELD TYPE:       ^/-      SH PIPE SIZE:            5        THICKNESS/SCHEDULE:          3.62"            MATERIAL:       CS COMPONENT TEMPERATURE:              71LF    ow I578 SCAN GAIN CONTROL SETTINGS STRAIGHT BEAM:             /V14                 ANGLE BEAM AXIAL:                 6o d8.
COUPLANT/           /     &-,,-c BATCH #:           56O 6b7"-H         *1-9sis                     ANGLE BEAM CIRC.:           b. &#xa3; dS EXAMINATION SCANS Performed                 Indications YES       NO     NO               YES
: 1) Base Metal Straight Beam
  / \   2)   Angle Beam-Normal-Against Flow
: 3)   Angle Beam-Normal-With Flow                                       'vIA
: 4)   Angle Beam-Along Weld-CW                            V
: 5)   Angle Beam-Along Weld-CCW F
L    6)   Straight Beam of Weld                                        /
0 W    7)   Thickness Across Weld & Base Metal                                                A UP STRM       WELD         DN STR ADDITIONAL COMMENTS
     -ScAN &-AiN SEMN7A6- /IAIW1?_4/,VETD 1001o30%- 1pIoLL CD /N0 EXAAlINA~nav D)UE-T NOaiL- C.oNIf/6-U*'eA-rmA EXAMINER:                  ? /j.e                           LLEVEL:-                  DATE:       .        g 6-REVIEWER:                                                   LEVEL:    I               DATE: /0.     /-S-,'
OTHER:     .                'LEVEL:                                                   DATE:-    e&deg;-3'/
STATION:           "       6.         &#xfd;&#xfd;                    DATE:       E-7  .
ANII:        IIl                                        _   DATE:

                                                                                               =.-
0GE NuclearEnergy Typical design for Top Head Nozzle LCS-2-N1 8 Exam coverage is limited due to the nozzle configuration REPORT NO.:
i&z-   'c3     P   GE:ot OF:I          00 62.75%
450 62.75%
60&deg; 62.75%
Exam Area CW Circ scans 62.75%             62.75%       CCW Circ scans 100.0%             100.0%      Ax Down GE REVIEWED BY          LEVEL  DATE 0.0%                0.0%      Ax Up 90.20%             94.30%       Base Metal 62.75%              63.14%             63.96%
UTILITY REVIEW            DATE Total composite coverage for Weld LCS-2-N18 = 63.28%
SMAD REVIEW             DATE 0
60 S

EXAMINATION 

==SUMMARY==
SHEET a            GE NUCLEAR ENERGY                                          LaSalle Unit 2 L2R08 LCS-2-N1B                         21.0039                           N-SH                            RPV                     B-D Component ID:                     Line ID:                     Configuration:                     System:              ASME Cat.:
Examination         Cert       Exam               Exams            Data       Cal                  Procedure            Calibration Personnel          Level    Completed           Performed         Sheet      Sheet                Revision                Block Paul Hayes               11      11/15/00              00L            D-070     D-070          UT-DRD-300V3 R.1             01-92-01 Credit              45 00 S         D-071     D-071          UT-DRD-300V3 R.A             01-92-01 60 S            D-072     D-072          UT-DRD-300V3 R.A             01-92-01 Section XI Examination Results:
Manual ultrasonic examination results were acceptable to the requirements of ASME Section Xl, 1989 Edition, No Addenda and Regulatory Guide 1.150.
Examinations were performed from the vessel wall with 00, 450 and 600 search units. The angle beam examinations were performed transverse and parallel to the weld.
No recordable indications were detected.
60.4% coverage of the examination volume was obtained.
Examination results were compared to data report          303,306,309    from      L2R02      outage with      X  No Change These examinations were performed under Work Order:                                                           N/A  Change This Summary and thefollowing data sheets have been reviewed and accepted by the folloivingpersonnel:           RWP:       2221
                                                                                                  .         .Dose:                80     mr.
GE Reviewed By:                 Level:        Date:      Station Reviewed By:

==Title:==
Date:
Reviewed By:                    Level:        Date:      ANII ;*ewed By:

==Title:==
Date:        Page    1   of   7

La Salle Unit 2 NI Nozzle CROSS SECTIONAL AREA (per slice)                                             TOTAL CODE COVERAGE code cross               area                area             % of code area % of code area    degrees            degrees             percent             percent sectional            scanned             scanned                scanned       scanned        scanned            scanned             scanned            scanned area              automated            manually              automated      manually      automated           manually          automated           manually 00 wm                                60.1                  0.0                25.5                     0.0         42.4            0.0              360.0                 0.0               42.4 450 T-scan                           60.1                  0,0                44.4                     0.0         73.9            0.0              360.0                 0.0               73.9 60' T-scan                           60.1                  0.0                48.9                     0.0         81.4            0.0              360.0                 0.0               81.4 45' P-scan CW                        60.1                  0.0                31.2                     0.0         51.9            0.0              360.0                 0.0               51.9 600 P-scan CW                        60.1                  0.0                36.5                     0.0         60.7            0.0              360.0                 0.0               60.7 45' P-scan CCW                       60.1                  0.0                31.2                     0.0         51.9            0.0              360,0                 0.0               51.9 60' P-scan CCW                       60.1                  0.0                36.5                     0.0         60.7            0.0              360.0                 0.0               60.7 0.0               60.4 Manual scans were not restricted.
No credit taken for initial 1/4" of material in Code coverage calculations due to near field effects..                                                    Total Composite Coverage =       60.4%
                                                                                                                              ,&#xfd; 2-R - 042 /                 rr7
: r. Zi        -?6 '. ,
                                                                                                                                        .01 .1

Lasalle 2 Recirculation Outlet N1 Nozzle 0O L-wove wel d metal, 45* and 60* T-scan coverage 60"T R9-              p"-6z7
                                       -7          2&#xfd;     -eL

Lasalle 2 Recirculation Outlet N1  Nozzle 45" and 60&deg; P-scan coverage
  /
I 45TP L'Z7 ~ (P ~cu

EXAMINATION 

==SUMMARY==
SHEET                                              Report No:
GE NUCLEAR ENERGY                                            LaSalle Unit 2 L2R08                                        2R8-002 LCS-2-N6A                          21.0061                           N-SH                           RPV                       B-D Component ID:                      Line ID:                      Configuration:                   System:                 ASME Cat.:
Examination        Cert         Exam               Exams             Data       Cal               Procedure              Calibration Personnel         Level     Completed            Performed         Sheet       Sheet              Revision                  Block Paul Hayes               11        11/16/00              00 L           D-096      D-096         UT-DRD-300V3 R.1              01-92-01
          -                          Credit              450S            D-097      D-097         UT-DRD-300V3 R.1              01-92-01 60 0S           0-098      D-098         UT-DRD-300V3 R.1              01-92-01 Section XI Examination Results:
Manual ultrasonic examination results were acceptable to the requirements of ASME Section X1, 1989 Edition, No Addenda and Regulatory Guide 1.150.
Examinations were performed from the vessel wall with 0&deg;, 450 and 600 search units. The angle beam examinations were performed transverse and parallel to the weld.
No recordable indications were detected.
68.4% coverage of the examination volume was obtained.
Examination results were comparedto datareport                 D457        from      L2R03    outage with      X  No Change These examinations were performed under Work Order:          990139382                                         N/A  Change This Summary and the following datasheets have been reviewed and accepted by thefollowing personnel:             RWP:         2221
____     ___   -                                                              p___     Dose:  -~240        mr.
GE Reviewed By:                 Level:          Date:     Station Reviewed By:

==Title:==
Date:
Reviewed By:                    Level:          Date:     ANII,      iewed By:

==Title:==
Date:          Page     1 - of _7 I,

La Salie Unit 2 N6 Nozzle CROSS SECTONAL AREA (per slice)                                           TOTAL CODE COVERAGE code cross              area                area              % of code area % of code area   degrees         degrees             percent          percent sectional            scanned             scanned                scanned        scanned       scanned         scanned             scanned         scanned area              automated            manually              automated       manually     automated        manually          automated         manually 00 wm                                58.7                  0.0                30.1                    0.0           51.3           0.0           360.0                 0.0            51.3 45' T-scan                           58.7                  0.0                47.5                    0.0           80.9          0.0            360.0                 0.0            80.9 60' T-scan                           58J7                  0.0                50.5                    0.0           86.0           0.0           360.0                 0.0            86.0 45' P-scan   CW                      58.7                  0.0                34:8                    0.0           59.3           0.0           360.0                 0.0            59.3 600 P-scan   CW                      58.7                  0.0                41.6                    0.0           70.9           0.0           360.0                 0.0            70.9 45' P-scan   CCW                     58.7                  0.0                34.8                    0.0           59.3          0.0            360.0                 0,0            59.3 600 P-scan   CCW                     58.7                  0.0                41.6                    0.0           70.9          0.0            360.0                 0.0            70.9 0.0            68.4 Manual scans were not restricted.
No credit taken for initial 1/4" of material in Code coverage calculations due to near field effects.
Total Composite Coverage =    68.4%
7 "IRYo0Z Pm_
                                                                                                                                     ;                       /ca7o2/-             'o

Lasalle 2 LPCI N6 Nozzle
: 0. L-wove weld metal, 45" and 60" T-scan coverage fI O"L 60*T 6c<Z
                                                    ~R8-c2~22~~
77? I'  /

Lasalle 2 LPCI N6 Nozzle 45" and 60" P-scan coverage I
2R2-aO'Z  /,*          7*7      7 i//li /'cc alf  " t - /f'G1C

EXAMINATION 

==SUMMARY==
SHEET                                           Report No:
GE NUCLEAR ENERGY                                        LaSalle Unit 2 L2R08                                        2R8-003 LCS-2-N6C                         21.0063                           N-SH                            RPV                     B-D Component ID:                     Line ID:                    Configuration:                      System:              ASME Cat.:
Examination         Cert       Exam                Exams          Data        Cal                  Procedure            Calibration Personnel          Level    Completed           Performed        Sheet       Sheet                Revision                Block Jason Breza              11      11/17/00              0&deg;L           D-093      D-093           UT-DRD-300V3 R.1            01-92-01 0                     D-094          UT-DRD-300V3 R.1             01-92-01
 '.:Tr*,'he-* ' ,         . 1        Credit               45 0S         D-094 60 S          D-095      D-095           UT-DRD-300V3 R.1            01-92-01 Section XI Examination Results:
Manual ultrasonic examination results were acceptable to the requirements of ASME Section Xl, 1989 Edition, No Addenda and Regulatory Guide 1.150.
Examinations were performed from the vessel wall with 00, 450 and 600 search units. The angle beam examinations were performed transverse and parallel to the weld.
No recordable indications were detected.
68.4% coverage of the examination volume was obtained.
Examination results were compared to data report           D454         from      L2R03      outage with      X  No Change These examinations were performed under Work Order:        990139382                                          N/A  Change This Summary and thefollowing data sheets have been reviewed and accepted by thefollowing personnel:            RWP:      2221
* A          *"f        -                    RWPDose: 300_ mr.
GE Reviewed By:                  Level:       Date:      Station Reviewed By:

==Title:==
Date:
Reviewed By:                     Level:       Date:      ANII RV wed By:

==Title:==
Date:        Page   1 of

La Salle Unit 2 N6 Nozzle CROSS SECTIONAL AREA (per slice)                                          TOTAL CODE COVERAGE code cross              area                area              % of code area % of code area   degrees         degrees             percent        percent sectional            scanned             scanned                scanned        scanned       scanned         scanned            scanned        scanned area              automated            manually              automated      manually      automated        manually          automated       manually 0, wm                                58.7                  0.0                30.1                    0.0           51.3           0.0           360.0                 0.0          51.3 450 T-scan                           58.7                  0.0                47.5                    0.0           80.9           0.0           360.0                 0.0          80.9 60' T-scan                           58.7                  0.0                50.5                    0.0           86.0           0.0           360.0                 0.0          86.0 450 P-scan   CW                      58.7                  0.0                34.8                    0.0           59.3           0.0           360.0                 0.0          59.3 60' P-scan   CW                      58.7                  0.0                41.6                    0.0           70.9           0.0           360.0                 0.0          70.9 450 P-scan   CCW                     58.7                  0.0                34.8                    0.0           59.3           0.0           360.0                 0.0          59.3 600 P-scan   CCW                     58.7                  0.0                41.6                    0.0           70.9           0.0           360.0                 0.0          70.9 0.0          68.4 Manual scans were not restricted.
No credit taken for initial 1/4" of material in Code coverage calculations due to near field effects.                                                  Total Composite Coverage =  68.4%
e J- - 7 P,
A.~     (' ~    -
64A~                     ~,
11     /Zt). ,st&#xfd; 11-;13 -00 &#xfd;xvff)

Lasalle 2 LPCI N6 Nozzle 0* L-wave weld metal, 45" and 60" T-scan coverage I
O'L 60"T 1 /4 n5'

Lasalle 2 LPCI N6 Nozzle 45" and 60" P-scan coverage
/
I
                               -7 RE7

        ~GE              NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                     Summary No: 2R9-012 WO No: 430431 PROJECT              LaSalle Unit 2 WELD ID:             LCS-2-N4A SYSTEM:              RPV N4A N-SH INITIAL CALIBRATION ID:                          NOZ.IN, NOZ.70.IN FINAL CALIBRATION ID:                            NOZ.OUT, NOZ.70.OUT GERIS DATA:                                      n4a.70.1, n4a.tI.1, n4a.tl.2, n4a.pl.1, n4a.p2.1
- 2MANUALD tA:                                      N/A OPERATORS:                                       M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 450 Shear wave, 600 RL, and 700 RL search units, 0' L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 3600 around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3.
The GERIS 2000 00 automated UT system 0&deg; reference is located at 90&deg; CW of nozzle TDC.
The GERIS 2000 OD system recorded no indications.
450 S / T-scan,                 No recordable indications.
600 RL / T-scan,                No recordable indications.
450 S / P1-scan,                No recordable indications.
450 S / P2-scan,                No recordable indications.
700 RL / T-scan,               No recordable indications.
70&deg; RL / P-ccw                  No recordable indications.
70&deg; RL / P-cw                  No recordable indications.
Automated Composite Coverage = 78.1%
By          DATE      REVIEWED BY           DATE     UTILITY REVI                                        DATE UT Level                 -_"&#xfd;v-03 I
T--
UT Level.=
                                                       ~I'
                                                           &#xfd; 4 (.03J
                                                              /  3                              1-LaSalle Unit-2, 2RO9                                                                                         Page I of_. I

Summary No.:  2R9-012 LaSalle Unit-2 Weld LCS-2-N4A Spring 2003 CODE CROSS-SECTIONAL AREA                  TOTAL CODE COVERAGE" Percent Weld Length =   360. Required Exam      Area Scanned    of Area       Weld Length      Percent Exam Volume =     59. Area Sq. In.          Auto        Auto             Auto           Auto 70* T-Scan         A         11.4                5.6        9.5%             360           4.7%
450 T-Scan         A         39.1               33.5       56.8%             360          28.4%
600 T-Scan         A          8.5                8.5       14.4%             360           7.2%
70&deg; P-Scan         A         11.4                4.9        8.3%             360           4.2%
450 P-Scan         A         39.1               31.2       52.9%             360          26.4%
IRS P-Scan         A          8.5                8.5       14.4%             360           7.2%
70' T-Scan 450 T-Scan 60&deg; T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 70&deg; T-Scan     _
450 T-Scan 60' T-Scan 70' P-Scan 450 P-Scan IRS P-Scan
                                                                             % Total Composite Coverage =    78.1%
Comments: A - Examined 360*. Scanning limited due to nozzle configuration.
Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                               Page   S" of IL

C..
                                                   .2' LaSalle Unit-2 Feedwater 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
70' T-Scan achieved = 5.6 Sq. In.
45&deg; T-Scan achieved = 33.5 Sq. In.
60&deg; T-Scan achieved = 8.5 Sq. In.
70'T           45r              60"T I              I                I

LaSalle Unit-2 Feedwater 70' Exam Volume = 11.4 Sq. In.
45&deg; Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60"T) = 8.5 Sq. In.
70&deg; P-Scan achieved = 4.9 Sq. In.
45&deg; P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
Ct X I            70*P           45&deg;P / IRS 7
F---
                                                          ===d

LaSalle 2 GL,   ,L6-JG1.xls GOD-SL6E LaSalle 2                                NOZZLE EXAMINATION PLAN                                                            -                    1/21/2003 Feedwater GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS 5-NOZOD                   26.25 VSLIR                  126.69                                                                                             1 WALL                     6.44 WELD RAD                17.25 ODBR                     3.56 TYPE                    F     (F-FLANGE OR B-BARREL)
Delay                         INDEX  INDEX    STEP       RADIAL DISTANCE      AGATE  BE GATE      C GATE FIXTURE CPU CH    ANGLE       TYPE    usec          X         Y      DEG  INCHES   INCHES       START      STOP    STOP    START STOP  STOP     ANGLE ANGLE 1     0.00      W       3.66       0.00       0.00     0.80   0.317    0.150          0        18.97    88                  54        -
2    45.0'       T      13.26      3.00       0.00     0.8'   0.411    0.150          0        13.12   235      -                   7.3    -7730 3    60.0'       T      14.15      -3.00      0.00     0.80   0.490    0.150          0        18.97   185                        353,9&deg;    6.10 4/6    45.0'      P1      13.26       3.00      0.00     0.80   0.336    0.150          0        10.00   235                        298.00   62.00  (ccw) 5/7    45.0*      P1      13.26      -3.00      0.00     0.8&deg;   0.336    0.150          0        10.00   235                         62.0'  -62.00  (cw) 416    45.0*      P2      13.26       3.00      0.00     0.80   0.336    0.150          0       10.00    235      -     -       -   321.3'   38.70  (ccw) 5/7    45,0'      P2      13.26      -3.00      0.00     0.80   0.336    0.150          0       10.00    235      -     -       -    38.70  -38.70  (cw) 1    70.00       T      12,00      0.00       0.00     0.80   0.380    0.150          0       10.87     52      -     -       -     0.00    0.0&deg; 2    70.0'       P      12,00      3.00       0.00     0.80   0.313    0.150          0        6.25     52      -     -       -   287.20   72.8'  (ccw) 3    70.0'       P      12.00      -3.00      0.00     0.80   0.313    0.150          0        6.25     52      -     -       -    72.80  -72.8*  (cw) 1    49.0&deg;     Z1R      17.48      2.50       0.00     1.70   0.500    0.070         60         90     395      -     -       -   335,50   24.50  (ccw) 2    49.0'     ZIR      17,48      -2.50      0.00     1.70   0.500    0.070         60         90     395      -     -       -    24.50  -24.50  (cw)
: 1. 68.00     Z2A      17.28       2.50      0.00     1.70   0.500    0.070         50         90     281      -     -       -   348.40   11.60  (ccw) 2    68.00     Z2A      17.28      -2.50      0.00     1.70   0.500    0.070         50         90     281      -     -       -    11.60  -11.6*  (cw) 2    30.00     Z2B      17.28       2.50      0.00     1.50   0.354    0.070          -          -     237       -    -       -   300.00   600    (cw) 1    30.00     Z2B      17.28      -2.50      0.00     1.50   0.354    0.070          -                237       -     -      -    60.00  -60.00  (ccw) 2    20.00      Z3      17.28       2.50      0.00     1.50   0.354    0.070          -                 188      -     -      -   270.00   90.0o  (cw) 1    20.00      Z3      17.28      -2.50      0.00     1.50   0.354    0.070          -                 188     -     -       -    90.0o  -90.00  (ccw)
-- 1/29/2003

          ~GE             NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                     Summary No: 2R9-013 WO No: 430431 PROJECT             LaSalle Unit 2 WELD ID:             LCS-2-N4B SYSTEM:              RPV N4B N-SH INITIAL CALIBRATION ID:                          NOZ.IN, NOZ.70.1N FINAL CALIBRATION ID:                            NOZ.OUT, NOZ.70.OUT GERIS DATA:                                      n4b.tl.1, n4b.pl.1, n4b.p2.1, n4b.70.1, n4b.70.2
,.-.,MANUALbTA.>''                                   N/A OPERATORS:                                       M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 450 Shear wave, 600 RL, and 70&deg; RL search units, 0&deg; L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 360' around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3, The GERIS 2000 OD automated UT system 0' reference is located at 900 CW of nozzle TDC.
The GERIS 2000 OD system recorded no indications.
450 S / T-scan,                No recordable indications.
600 RL / T-scan,               No recordable indications.
450 S / P1-scan,              No recordable indications.
450 S / P2-scan,              No recordable indications.
70&deg; RL / T-scan,              No recordable indications.
700 RL / P-ccw                No recordable indications.
70&deg; RL / P-cw                 No recordable indications.
Automated Composite Coverage = 78.1%.
Qi                                                                                                                        I LaSalle Unit-2, 2RO9                                                                                         Page I of A

Sommary No.:    2R9-013 LaSalle Unit-2 Weld LCS-2-N4B Spring 2003 CODE CROSS-SECTIONAL AREA                  TOTAL CODE COVERAGE Percent Weld Length = 360. Required Exam      Area Scanned    of Area       Weld Length      Percent Exam Volume =   59. Area Sq. In.          Auto        Auto             Auto           Auto 70' T-Scan        A          11.4                5.6       9.5%              360           4.7%
450 T-Scan        A          39.2               33.5       56.8%             360          28.4%
60&deg; T-Scan        A           8.5                8.5       14.4%             360           7.2%
70&deg; P-Scan        A          11.4                4.9        8.3%             360           4.2%
450 P-Scan        A          39.2               31.2       52.9%             360          26.4%
IRS P-Scan        A           8.5                8.5       14.4%             360           7.2%
70' T-Scan 45' T-Scan 60&deg; T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 70' T-Scan 450 T-Scan "
60&deg; T-Scan 70' P-Scan 450 P-Scan IRS P-Scan
                                                                             % Total Composite Coverage =    78.1%
Comments: A - Examined 360'. Scanning limited due to nozzle configuration.
Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                               Page _       of I_

LaSalle Unit-2 Feedwater 700 Exam Volume = 11.4 Sq. In.
45&deg; Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.6 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
70"T            451T            60"T I              I

zo&#xfd; LaSalle Unit-2 Feedwater 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
70' P-Scan achieved = 4.9 Sq. In.
45' P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
   /                    70"P           45P I IRS I              I 1//
I-----
B I      -~
I

9.,.
LaSalle 2 GL   .L6-JG1.xls GOD-SL6E LaSalle 2                                 NOZZLE EXAMINATION PLAN                                                      ,.                         1/2112003 Feedwater GERIS.2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   26.25 VSLIR                 126.69 WALL                      6.44 WELD RAD                17.25 ODBR                      3.56 TYPE                    F      (F-FLANGE OR B-BARREL)
Delay                          INDEX  INDEX    STEP       RADIAL DISTANCE    AGATE BE GATE     C GATE   FIXTURE CPU CH    ANGLE       TYPE    usec           X         Y      DEG  INCHES   INCHES      START      STOP   STOP   START STOP STOP       ANGLE ANGLE 1     0.00      W       3.66        0.00      0.00      0.80   0.317    0.150        0        18.97    88                 54         -
2    45.00       T     13.26        3.00      0.00      0.80   0.411    0.150        0        13.12   235         -          -     7.33       -7.3 3    60.00       T     14.15        -3.00     0.00      0.80   0.490    0.150        0        18.97   185         -          -   353.90        6.10 4/6    45*0O      P1     13.26        3.00      0.00      0.80   0.336    0.150        0        10.00   235                        298.00      62.00  (ccw) 5/7    45.0'      P1     13.26        -3.00      0.00     0.80   0.336    0.150        0        10.00   235     -     -        -    62.00      -62.0' (cw) 4/6    45.0'      P2     13.26         3.00      0.00     0.80   0.336    0.150        0        10.00   235     -     -        -   321.30      38.70  (ccw) 5/7    45.0*      P2     13.26        -3.00     0.00      0.80   0.336    0.150        0        10.00   235     -     -        -    38.70      -38.70 (cw) 1    70.00       T     12.00        0.00      0.00      0.80   0.380    0.150        0        10.87    52     -     -        -     0.00        0.0&deg; 2    70.00       P     12.00        3.00      0.00      0.80   0.313    0.150        0         6.25    52     -     -        -   287.20      72.80  (ccw) 3    70.00       P     12.00        -3.00     0.00      0.80   0.313    0.150        0         6.25    52     -     -        -    72.80      -72.8* (cw) 1    49.0      ZIR     17.48        2.50      0.00      1.70   0.500    0.070       60          90    395                                 I33550 24.50  (cw) 2    49.0'     Z1R     17.48        -2.50     0.00      1.70   0.500    0.070       60          90    395     -     -        -    24.50      -24.5&deg; (cw) 1    68.00     Z2A     17.28        2.50      0.00      1.70   0.500    0.070       50          90    281     -     -        -   348.4        11.60 (cow) 2    68.00     Z2A     17.28        -2.50     0.00      1.70   0.500    0.070       50          90    281     -     -        -    11.60      -11.6' (cw) 2    30.00     Z2B     17.28        2.50      0.00      1.50   0.354    0.070       5           90    237     -     -             11300.0    60.00  (cw) 1    30.00     Z2B     17.28        -2.50     0.00      1.50   0.354    0.070        -           -    237     -     -             60.00      -60.00 (cw) 2    20.00      Z3     17.28        2.50      0.00      1.50   0.354    0.070                    -    188      -                 270.00      90.00  (cw) 1    20.00      Z3     17.28        -2.50     0.00      1.50   0.354    0.070                    -    188      -                  90.00      -90.0, (ccw) 1/29/2003

GE NUCLEAR ENERGY
(                     UT EXAMINATION 

==SUMMARY==
SHEET                                     Summary No: 2R9-014 WO No: 430431 PROJECT              LaSalle Unit 2 WELD ID:             LCS-2-N4C SYSTEM:              RPV N4C N-SH INITIAL CALIBRATION ID:                          NOZ.IN, NOZ.70.IN FINAL CALIBRATION ID:                            NOZ.OUT, NOZ.70.OUT GERIS DATA:                                      n4c.ti.1, n4c.ti.3, n4c.pl.1, n4c.p2.1, n4c.p2.2, n4c.70.1
   "-MANUALDATU         A                             N/A OPERATORS:                                       M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section X1, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 450 Shear wave, 600 RL, and 700 RL search units, 00 L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 360* around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3.
The GERIS 2000 OD automated UT system 0&deg; reference is located at 90* CW of nozzle TDC.
The GERIS 2000 OD system recorded no indications, S.
450 S / T-scan,                No recordable indications.
600 RL/ T-scan,                No recordable indications.
450 S / P1-scan,               No recordable indications.
450 S / P2-scan,               No recordable indications.
70&deg; RL / T-scan,               No recordable indications.
70&deg; RL / P-ccw                 No recordable indications.
7A0 RL I P-cw                  No recordable indications.
Automated Composite Coverage         =  78.1%.
  &#xfd;1 LaSalle Unit-2, 2RO9                                                                                        Page I of     q

Su.mmary No.: 2R9-014 LaSalle Unit-2 Weld LCS-2-N4C Spring 2003 CODE CROSS-SECTIONAL AREA                    TOTAL CODE COVERAGE' Percent Weld Length = 360. Required Exam      Area Scanned     of Area        Weld Length       Percent Exam Volume =  59.      Area Sq. In.          Auto          Auto             Auto            Auto 70* T-Scan      A           11.4                5.6         9.5%              360            4.7%
450 T-Scan       A           39.2               33.5        56.8%              360           28.4%
60' T-Scan       A            8.5                8.5         14.4%             360            7.2%
70' P-Scan       A           11.4                4.9         8.3%              360            4.2%
450 P-Scan       A           39.2               31.2        52.9%              360           26.4%
IRS P-Scan       A            8.5                8.5         14.4%             360            7.2%
70&deg; T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan IRS P-Scan 9/6 1otal Composite Coverage =     [U. I 7o Comments: A - Examined 360&deg;. Scanning limited due to nozzle configuration.
Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                                    Page 3  of _q

LaSalle Unit-2 Feedwater 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.6 Sq. In.
45' T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
I                  70'T           457             60T I              I               I

LaSalle Unit-2 Feedwater 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
70' P-Scan achieved = 4.9 Sq. In.
450 P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
I 70"P          45"P I IRS I               I I
I

LaSalle 2 GC      L6-JG1 .xIs GOD-SL6E LaSalle 2                                 NOZZLE EXAMINATION PLAN                                                                                 1/21/2003 Feedwater GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   26.25 VSLIR                  126.69 WALL                      6,44 WELD RAD                17.25 ODBR                      3.56 TYPE                    F      (F-FLANGE OR B-BARREL)
Delay                          INDEX  INDEX    STEP       RADIAL DISTANCE       AGATE BE GATE      C GATE FIXTURE CPU CH   ANGLE        TYPE    usec            X        Y      DEG  INCHES   INCHES      START        STOP    STOP   START STOP  STOP     ANGLE ANGLE 1    0.0&deg;       W       3.66         0.00     0.00      0.80   0.317    0.150        0           18.97    88                 54        -
2   45.0'       T      13.26         3.00     0.00      0.80   0.411    0.150         0          13.12   235     -             -     7.3&deg;   -7.3*
3   60.00       T      14.15        -3.00     0.00      0.8&deg;   0.490    0.150        0           18.97   185            -      -   353.9*    6.10 4/6   45.00       P1     13.26         3.00     0.00      0.8&deg;   0.336    0.150        0           10.00   235     -298.0                     62.00  (cow) 5/7   45.0'       P1     13.26        -3.00     0.00      0.80   0.336    0.150        0           10.00   235     -                  62.0&deg;  -62.0'  (cw) 4/6   45.0'       P2      13.26        3.00     0.00      0.80   0.336    0.150        0           10.00   235            -      -   321.30   38.70  (cow) 5/7   45,00       P2     13.26        -3.00     0.00      0.80   0.336    0.150        0           10.00   235            -      -    38.70  -38.7'  (cw) 1   70.00       T      12.00         0.00     0.00      0.80   0.380    0.150        0          10.87     52            -     -      0.00    0.00 2   70,00       P      12.00         3.00     0.00      0.80   0.313    0.150        0           6.25     52            -      -   287.20   72.8&deg;  (ccw) 3   70,0*       P      12.00        -3.00     0.00      0.80   0.313    0.150        0           6.25     52            -      -    72.80  -72.8&deg;  (cw) 1   49.00      ZIR     17.48         2.50     0.00      1.7I   0.500    0.070       60             90    395                       335.5   24.50   (ccw) 2   49.0'      Z1R     17.48        -2.50     0.00      1.7'   0.500    0.070       60             90    395            -      -    24.50  &#xf7;24.5&deg;  (cw) 1   68.00      Z2A     17.28        2.50      0.00      1.70   0.500    0.070       50             90    281            -      -   348.4    11.60  (cow) 2   68.00      Z2A     17.28        -2.50     0.00      1.7'   0.500    0.070       50             90    281            -      -    11.6&deg;   11.6&deg;  (cw) 2   30,00      Z2B     17.28        2.50      0.00      1.50   0.354    0.070        -              -    237            -      -   300.00  60.00   (cw) 1   30.0'      Z2B     17.28        -2.50     0.00      1.50   0.354    0.070        -                   237                        60.00  -60.0,  (ccw) 2   20.00      Z3      17.28        2.50      0.00      1.50   0.354    0.070        -                   188                       270.0'  90.00   (cw) 1   20.0&deg;       Z3     17.28        -2.50     0.00      1,5&deg;   0354     0.070                            188                        90.00  -90.0&deg;  (ccw) 1/29/2003

GE NUCLEAR ENERGY
(       W             UT EXAMINATION 

==SUMMARY==
SHEET                                     Summary No: 2R9-015 WO No: 430431 PROJECT              LaSalle Unit 2 WELD ID:             LCS-2-N4D SYSTEM:              RPV N4D N-SH INITIAL CALIBRATION ID:                          NOZIN, NOZ.70.IN FINAL CALIBRATION ID:                            NOZ.OUT, NOZ.70.OUT GERIS DATA:                                      n4d.tl.1, n4d.70.1, n4d.70.2, n4d.pl.1, n4d.pl.2, n4d.p2.1 MAKUAL DTA                                       N/A OPERATORS:                                       M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section X1, 1989 Edition no Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 45&deg; Shear wave, 60' RL, and 70' RL search units, 0&deg; L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 3600 around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3.
The GERIS 2000 OD automated UT system 0' reference is located at 90* CW of nozzle TDC.
(-   The GERIS 2000 OD system recorded ten (10) indications.
450 S / T-scan,                One (1) acceptable indication.
60&deg; RL / T-scan,               No recordable indications.
450 S / P1-scan,               Four (4) acceptable indications.
450 S / P2-scan,               Four (4) acceptable indications.
70* RL / T-scan,               One (1) acceptable indication.
70' RL / P-ccw                 No recordable indications.
70&deg; RL / P-cw                  No recordable indications.
The indications recorded above have no determinable through wall dimension and are acceptable to the requirements of IWB-3000.
Automated Composite Coverage         =  78.1%
P, EPARED BY              DATE     REVIEWED BY            DATE     l1rITPIR   IE)V7 'DATE      ANII REVIEW             DATE UTLevel: 7i-.          .-          UTLevel:=7-           Iz*,v3               7 LaSalle Unit-2, 2R09                                                                                        Page I of 21

__1 Summary No.:    2R9-015 LaSalle Unit-2 Weld LCS-2-N4D Spring 2003 CODE CROSS-SECTIONAL AREA                  TOTAL CODE COVERAGE Percent Weld Length =   360. Required Exam      Area Scanned    of Area      Weld Length       Percent Exam Volume       59. Area Sq. In.          Auto        Auto             Auto           Auto 700 T-Scan          A        11.4                5.6        9.5%             360           4.7%
450 T-Scan          A        39.2               33.5       56.8%             360          28.4%
600 T-Scan          A         8.5                8.5       14.4%             360           7.2%
70' P-Scan          A        11.4                4.9       8.3%              360           4.2%
450 P-Scan          A        39.2               31.2       52.9%             360          26.4%
IRS P-Scan          A         8.5                8.5       14.4%             360           7.2%
700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan      _
450 P-Scan IRS P-Scan 700 T-Scan 450 T-Scan 60' T-Scan 700 P-Scan 450 P-Scan IRS P-Scan
                                                                             % Total Composite Coverage =    78.1%
Comments: A - Examined 3600. Scanning limited due to nozzle configuration.
Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                               Page _  t    of_ ___

4 LaSalle Unit-2 Feedwater 700 Exam Volume = 11.4 Sq. In.
45&deg; Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.6 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
60&deg; T-Scan achieved = 8.5 Sq. In.
707            457

                                                           ~i.~
LaSalle Unit-2 Feedwater 70' Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS &60&deg;T) 8.5 Sq. In.
70&deg; P-Scan achieved = 4.9 Sq. In.
45' P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
/           I           70&deg;P          45&deg;P / IRS
( _________
I 7-I

LaSalle 2 GG- ,L6-JG1.xls GOD-SL6E LaSalle 2                                 NOZZLE EXAMINATION PLAN                                                           -                    1121/2003 Feedwater GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   26.25 VSLIR                  126.69 WALL                      6.44 WELD RAD                17.25 ODBR                      3.56 TYPE                    F      (F-FLANGE OR B-BARREL)
Delay                         INDEX   INDEX    STEP       RADIAL DISTANCE      AGATE  BE GATE     C GATE FIXTURE CPU CH    ANGLE       TYPE    usec           X         Y       DEG  INCHES   INCHES      START      STOP     STOP    START STOP STOP     ANGLE ANGLE 1     0.00      W        3.66       0.00       0.00      0.8*   0.317    0.150        0         18.97     88                 54        -
2    45.0'      T       13.26       3.00       0.00      0.80   0.411    0.150        0         13.12    235     -      -     -      7.3     -7.3 3    60.0'      T       14.15       -3.00      0.00      0.80   0.490    0.150        0         18.97     185    -      -     -    353.90     6.10 416    45.0*      P1      13.26       3.00       0.00      0.80   0.336    0.150        0         10.00    235     -      -     -    298.00   62.00  (ccw) 5/7    45.0'      P1      13.26       -3.00      0.00      0.80   0.336    0.150        0         10.00    235     -      -     -     62,00   -62.0&deg; (cw) 4/6    45.00      P2      13.26       3.00       0.00      0.80   0.336    0.150       0l         10.00    235     -      -     -    321.30   38.70  (ccw) 5/7    45.00      P2      13.26       -3.00      0.00      0.80   0.336    0.150        0.        10.00    235                  -     38.70   -38.7* (cw) 1    70.00      T       12.00       0.00       0.00      0.8'   0,380    0.150        0         10.87. 52                  -      0.0)    0'0.
2    70,00      P       12.00       3.00       0.00      0.80   0.313    0.150        0   .      6.25     52                  -    287.20    72.86 (ccw) 3    70.0'      P       12.00       -3.00      0.00      0.80   0.313    0.150        0          6.25     52                        72.8'   -72.80 (cw) 1    49.00     Z1R      17.48       2.50       0.00     .1.70   0.500    0.070       60           90      395                 -    335.50   24.50  (ccw) 2    49.00     ZIR      17.48       -2.50      0.00      1,7&deg;   0.500    0.070       60           90     395                        24.50   -24.5&deg; (cw) 1    68.00     Z2A      17.28       2.50     . 0.00      1.70   0.500    0.070       50           90     281                       348.40    11.60 (ccw) 2    68,00     Z2A      17.28       -2.50      0.00      1.70   0.500    0.070       50           90     281     -                  11.60   -11.6* (cw) 2    30V       Z2B      17.28       2.50       0.00      1.50   0.354    0.070        -            -     237     -                 300.00   60.00  (cw) 1    30.00     Z2B      17.28       -2.50      0.00      1.50   0.354    0.070                           237     -                  60.00   -60.0&deg; (ccw) 2    20.00      Z3      17.28       2.50       0.00      1.50   0.354    0.070                            188                      270.00    90.00 (cw) 1    20,00      Z3      17.28       -2.50      0.00      1.5    0.354    0.070                            188                       90.00   -90.00 (ccw) 1/28/2003

GE NUCLEAR ENERGY
(                      UT EXAMINATION 

==SUMMARY==
SHEET                                    Summary No: 2R9-016 WO No: 430431 PROJECT              LaSalle Unit 2 WELD ID:             LCS-2-N4E SYSTEM:              RPV N4E N-SH INITIAL CALIBRATION ID:                         NOZ.IN, FINAL CALIBRATION ID:                           NOZ.OUT GERIS DATA:                                     n4e.pl.2, n4e.p2.1, n4e.ti.1, n4e.70.1, n4e.70.2
      -ANUAL DATA:!                                   N/A OPERATORS:                                      M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 450 Shear wave, 600 RL, and 70* RL search units, 0&deg; L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 3600 around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3, The GERIS 2000 OD automated UT system 0&deg; reference is located at 900 CW of nozzle TDC.
The GERIS 2000 OD system recorded three (3) indications.
(..
450  S/  T-scan,               No recordable indications.
600  RL  I T-scan,             No recordable indications.
450  S/  P1-scan,              One (1) acceptable indication.
450  S/  P2-scan,              No recordable indications.
700 RL / T-scan,              Two (2) acceptable indications.
70&deg; RL / P-ccw                 No recordable indications.
700 RL / P-cw                  No recordable indications.
The indications recorded above have no determinable through wall dimension and are acceptable to the requirements of IWB-3000.
Automated Composite Coverage = 78.1%.
EPARED BY             DATE      REVIEWED BY           DATE    UTILITY R7IEW      / DATE   ANII REVIEW             DATE Leve=: r         nt- L-7-o3     UTLevel:-         \-rn. ()
                                                           \k        _   _
LaSalle Unit-2, 2RO9                                                                                       Pana I nf     ILL

summary No.:  2R9-016 LaSalle Unit-2 Weld LCS-2-N4E Summary No.:  2R9-016 Spring 2003 CODE CROSS-SECTIONAL AREA                     TOTAL CODE COVERAGE Percent Weld Length =  360. Required Exam     Area Scanned     of Area          Weld Length      Percent Exam Volume =     59. Area Sq. In.          Auto        Auto                Auto          Auto 700 T-Scan         A          11.4                 5.6       9.5%                360           4.7%
450 T-Scan         A          39.2                33.5      56.8%                360          28.4%
60 T-Scan          A           8.5                 8.5      14.4%                360           7.2%
700 P-Scan         A          11.4                4.9        8.3%                360          4.2%
450 P-Scan         A          39.2                31.2      52.9%                360          26.4%
IRS P-Scan         A           8.5                 8.5      14.4%                360           7.2%
700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan      _
IRS P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan TI otal Composite Coverage =    78.1,/o Comments: A - Examined 3600. Scanning limited due to nozzle configuration.
,Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                                   Page
* of

                                                   "-iF LaSalle Unit-2 Feedwater 700 Exam Volume = 11.4 Sq. In.
45&deg; Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS &60&deg;T) = 8.5 Sq. In.
70' T-Scan achieved = 5.6 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
/
70"1"          45'T            60'r

LaSalle Unit-2 Feedwater 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
70&deg; P-Scan achieved = 4.9 Sq. In.
45&deg; P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
Ot
 /                 70'P          45P I IRS I           Iz I              I I  7' I

LaSalle 2 G(.- SL6-JG1.xIs GOD-SL6E LaSalle 2                                 NOZZLE EXAMINATION PLAN                                                                               1/21/2003 Feedwater GERIS-2000 NOZZLE-TO-VESSEL SCANNING LIMITS NOZOD                   26.25 VSLIR                  126.69 WALL                      6.44 WELD RAD                17.25 ODBR                      3.56 TYPE                    F      (F-FLANGE OR B-BARREL)
Delay                         INDEX   INDEX    STEP       RADIAL DISTANCE     AGATE BE GATE     C GATE FIXTURE CPU CH    ANGLE       TYPE    usec            X        Y      DEG   INCHES   INCHES       START     STOP    STOP   START STOP STOP     ANGLE ANGLE 1     0.00      W       3.66         0.00      0.00     0.80    0.317    0.150         0       18.97     88     -          54        -
2    45.00       T      13.26        3.00      0.00     0.80    0.411    0.150          0      13.12    235         -       -     7.33     -773*
3    60.00       T      14.15       -3.00      0.00     0.60    0.490    0.150          0      18.97    185     -                35390     6.10 4/6    45.00      P1      13.26        3.00      0.00     0.80    0.336    0.150          0      10.00    235     -                298.00   62.00  (ccw) 5/7    45.00      P1      13.26       -3.00      0.00     0.80    0.336    0.150          0      10.00    235     -                 62.00   -62.0* (cw) 416    45.00      P2      13.26        3.00      0.00     0.85    0.336   .0.150          0      10.00    235     -                321.30   38.70  (ccw) 5/7    45.00      P2      13.26       -3.00      0.00     0.80. 0.336    0.150          0,     10.00    235     -                 38.7'  -38.7&deg;  (cw) 1    70.00       T      12.00        0.00      0.00     0.80    0.380    0.150          0      10.87     52     -                  0.00    0.00 2    70.0'       P      12.00        3.00      0.00     0.80    0.313    0.150        .0        6.25     52     -                287.20   72.80  (ccw) 3    70.00       P      12.00       -3.00      0.00     0.80    0.313    0.150          0        6.25    52     -                 72.80   -72.8&deg; (cw) 1    49.0'     Z1R      17.48        2.50      0.00     1.70    0.500    0.070         60         90    395     -                335.50   24.50  (ccw) 2    49.00     ZIR      17.48       -2.50      0.00     1.7'    0.500    0.070        60          90    395     -                 24.50   -24.5' (cw) 1    68.0'     Z2A      17.28        2.50      0.00     1.70    0.500    0.070         50         90    281     -                348.40    11.60 (ccw) 2    68.0'     Z2A      17.28       -2.50      0.00     1.7     0.500    0.070         50         90    261     -                 11.60   -11.6* (cw) 2    30.0'     Z2B      17.28        2.50      0.00     1.50    0.354    0.070          -          -    237     -                300.0'   60.00  (cw) 1    30.00     Z2B      17.28       -2.50      0.00     1.50    0.354    0.070                          237     -                 60.00   -60.00 (ccw) 2    20.00      Z3      17.28        2.50      0.00     1.5&deg;    0.354    0.070                          188     -                270.00   90.00  (cw) 1    20.00      Z3      17.28       -2.50      0.00     1.50    0.354    0.070           -              188     -                 90.00   -90.0&deg; (ccw) 1/28/2003

*     *GE                  NUCLEAR ENERGY UT EXAMINATION 

==SUMMARY==
SHEET                                      Summary No: 2R9-017 WO No: 430431 PROJECT              LaSalle Unit 2 WELD ID:             LCS-2-N4F SYSTEM:              RPV N4F N-SH INITIAL CALIBRATION ID:                          NOZ.IN, NOZ.70.IN FINAL CALIBRATION ID:                           NOZ.OUT, NOZ.70.OUT GERIS DATA:                                     n4f p2.1, n4f.tl.1, n4f.tI.2, n4f.pl.1, n4f.70.1, n4f.70.2 IVIANUAL DATA.                                  N/A OPERATORS:                                      M. Hilborn Lv II; L. Benicki Lv II; CE Frakes Lv II; J.Guillote Lv II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-0 Reactor Pressure Vessel (RPV) Assembly Welds Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V2, using 450 Shear wave, 600 RL, and 70&deg; RL search units, 0&deg; L-Wave supplemental scans were also performed.
Automated scanning was performed from the nozzle OD surface, 360* around the nozzle, with no restrictions.
For initial calibrations refer to report G2K-CAL-1.
For final calibrations refer to report G2K-CAL-3.
The GERIS 2000 OD automated UT system 0&deg; reference is located at 90* CW of nozzle TDC.
The GERIS 2000 OD system recorded no indications.
450 S / T-scan,                No recordable indications.
60* RL / T-scan,               No recordable indications.
456 S / PT-scan,              No recordable indications.
450 S / P12-scan,             No recordable indications, 70* RL / T-scan,              No recordable indications.
70* RL / P-ccw                No recordable indications.
700 RL / P-cw                 No recordable indications.
Automated Composite Coverage = 78.1%.
  ,,REPARED BY                DATE REVIEWED BY                DATE       UtETVY  EiRVEVIEW W      DkTE                          DATE UTLevel:.L         nt-30,-.3 UT Level: -fa              -     3 LaSalle Unit-2, 2RO9                                                                                           Paqe I of q

Summary No.:  2R9-017 LaSalle Unit-2 Weld LCS-2-N4F Spring 2003 CODE CROSS-SECTIONAL AREA                   TOTAL CODE COVERAGE-Percent Weld Length =    360. Required Exam       Area Scanned    of Area       Weld Length      Percent Exam Volume =      59. Area Sq. In.          Auto        Auto             Auto          Auto 70 0 T-Scan         A          11.4               5.6         9.5%             360          4.7%
450 T-Scan          A          39.1              33.5        56.8%             360          28.4%
600 T-Scan          A          8.5                8.5        14.4%             360           7.2%
700 P-Scan          A          11.4               4.9         8.3%             360          4.2%
450 P-Scan          A          39.1              31.2        52.9%             360          26.4%
IRS P-Scan          A          8.5                8.5        14.4%             360           7.2%
70' T-Scan      _
450 T-Scan 60* T-Scan 70* P-Scan 450 P-Scan IRS P-Scan 70' T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan IRS P-Scan
                                                                                % Total Composite Coverage =    78.1%
Comments:     A - Examined 3600. Scanning limited due to nozzle configuration.
Note - Rounding methods may make calculated values appear in error.
LaSalle Unit-2, 2RO9                                                                                                  Page  3    of

LaSalle Unit-2 Feedwater 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
70&deg; P-Scan achieved = 4.9 Sq. In.
450 P-Scan achieved = 31.2 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In.
  /
I q_
70'P          45*P / IRS I   _ _
7
                                                             -I

LaSalle Unit-2 Feedwater 70&deg; Exam Volume = 11.4 Sq. In.
45' Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
70' T-Scan achieved = 5.6 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
60&deg; T-Scan achieved = 8.5 Sq. In.
!                  70'T           45'T             60'T I                    I              I                I

LaSalle 2 GO. L.6-JGI .xls GOD-SL6E LaSalle 2                                 NOZZLE EXAMINATION PLAN                                                               -
* 1/21/2003 Feedwater GERIS-2000 NOZZLE.TO-VESSEL SCANNING LIMITS NOZOD                   26.25 VSLIR                  126.69 WALL                      6.44 WELD RAD                17.25 ODBR                      3.56 TYPE                    F      (F-FLANGE OR B-BARREL)
Delay                          INDEX   INDEX        STEP       RADIAL DISTANCE       AGATE BE GATE      C GATE FIXTURE CPU CH    ANGLE        TYPE    usec           X         Y      DEG    INCHES      INCHES       START        STOP   STOP   START STOP  STOP     ANGLE ANGLE 1     0.00       W       3.66        0.00       0.00     0.80     0.317       0.150         0          18.97    88     -            54       -
2    45.0'       T      13.26        3.00       0.00     0.80     0.411       0.150         0          13.12   235         -         -     7.33     -7.3 3    60.00       T      14.15        -3.00      0.00     0.80     0.490       0.150         0          18.97   185     -     -       -   353.9       6.10 4/6    45.00      P1      13.26         3.00      0.00     0.80     0.336       0.150         0          10.00   235                                  62.00 129.0&deg;    (ocw) 5/7    45.00      P1       13.26       -3.00      0.00     0.80     0.336       0.150         0          10.00   235     -     -       -    62.00    -62.00 (cw) 4/6    45.0*      P2      13.26         3.00      0.00     0.80     0.336       0.150         0          10.00   235     -     -       -   321.30     38.70 (ccw) 5/7    45.0'      P2       13.26       -3.00      0.00     0.80     0.336       0.150         0          10.00   235     -     -       -    38.70    -38.7a (cw) 1    70.00       T      12.00        0.00       0.00     0.80     0.380       0.150         0          10.87    52     -     -       -     0.00      0.00 2    70.0'       P       12.00        3.00      0.00     0.80     0.313       0.150         0           6.25    52     -     -       -   287.20     72.80 (ccw) 3    70.00       P       12.00       -3.00      0.00     0.80     0.313       0.150         0           6.25    52     -      -      -    72.80    -72.8* (cw) 1   49.0'      Z1R      17.48        2.50      0.00     1.70     0.500       0.070        60            90    395            -      -   335.50     24.50 (ccw) 2    49.0*     Z1R       17.48       -2.50      0.00     1.70     0.500       0.070        60            90    395           -       -    24.50    -24.5' (cw) 1   68.00      Z2A      17.28        2.50      0.00      1.7'    0.500       0.070        50            90    281     -     -       -   348.40     11.60 (ccw) 2    68.00      Z2A     17.28        -2.50      0.00      1.7*    0.500       0.070        50            90    281     -     -       -    11.60    -11.60 (cw) 2    30.00      Z2B      17.28        2.50      0.00      1.5'    0.354       0.070         -             -    237     -     -       -   300.00     60.00 (cw) 1   30.00      Z2B      17.28       -2.50      0.00      1.5&deg;    0.354       0.070         -                  237     -     -       -    60.00    -60.00 (ccw) 2    20.00      Z3       17.28        2.50      0.00      1.5&deg;      *0.354    0.070               -            188     -                 270.00     90.00 (cw) 1   20.00      Z3       17.28       -2.50      0.00      1.5  1 0.354        0.070                            188                        90.00    -90.0* (ccw)
_-) 1/30/2003
* __                           EXAMINATION 

==SUMMARY==
SHEET                                         2R9-e6o Report  NNo.:
GE NUCLEAR         ENERGY                                                                                        2R-6 Site and Unit:                 LaSalle Unit 2                      Component ID:                       IRH-HX2B-08D Outage:                L2R09 System,              RHR                 ASME Cat.:        C-C       ASME Item      C3.10       Aug Requirements:          N/A Exams Performed    Data Sheet        Cal Sheet            Procedure         Calibration Block F    Examination -Cet   Level.      Date Personnel MT            MT-004             N/A           MT-EXLN-102V0                N/A            Michael Kemp       II        1/22/2003 Examination Results:
During the magnetic particle examination of the above referenced weld, 1 indication was recorded. Indication was acceptable in accordance with ASME Section XI, Table IWC-3510-3.
74.4% of the code required surface area was examined.
This examination meets the requirements of ASME Section XI, 1989 Edition, no Addenda.
Examinationresults were compared to data report            D-307       from       1990      outage with     -  No Change These examinations were performed under Work Order:            430436                                     [Ji  Change This Summary and the following data sheets have been reviewed and accepted        y the following personnel:
Prepared By:                   Level:       Date:     Utility Reviewe   B

==Title:==
ate:
N/A                     N/A..N..... N/A Reviewed By:                   Level:       Date. AN1i Reviewed By:

==Title:==
Date:        Page     1   of

GE Nuclear Energy                                    MAGNETIC PARTICLE EXAMINATION REPORT Site:    LaSalle                            Unit: 2            Project:      L2R09                   Report Number:               2R9-060 Sheet No.:                   MT-004 Weld No.:       IRH-HX2B-08D                                          Configuration:       I Lug Drawing:        GEL-1111                                              System:              RHR Procedure No.:         MT-EXLN-102VO                          Version / Revision          Rev. 0        DRR:                  N/A Material:                          Surface Condition:                      Item:
Carbon Steel                       Smooth                                  Weld - Final Magnetizing Apparatus                                                                  Black Light Mfg:               ParkerResearch         Yoke Calibration: AC - 10 lb. Lift                                       Model            Serial Number Model:             B-300                                                                        Blacklight     N/A               N/A Serial No.         8140                   Yoke Spacing:            6'                           Light Meter    N/A               N/A Thermometer:            222229                       Surface Temperature:             65&deg; F Technique                                         Examination Medium                                      Blacklight Intensity Magnetization: AC                           Magnetic Particles:          Dry                                                     N/A Technique:          Continuous                  ParkerResearch                 RP-6              11793                    Blacklight Intensity Manufacturer:          Particle Type:       Batch No indication Number:                                                 

== Description:==
p             Results:
1         I                                   1/8" Linear on IRH-HX2BOD                                                            RI Comments:
See attached sketch #2 for indication details.
See attached sketch #1 for exam limitation.
Michael Kemp                       1.17j II            1/2212003         Utility Review                                Date Initial Examiner                   Level       Date GE Review                          Level       Date                ANII Review                                  Date            Page        _    of 6

(
                        -T t-hc        -v 9 C              tq-v ".~7   i/     /- 6,t 3-o(
T 'k q -t4 x Z6~ -         P T jCH -/JXZC-Oyi t)mJ      stote
      * < 7"tI S rv',c Tv,('f I    fpp,,
II
                                /13             7')   +- CZA2.S                    )
O)CA   A)o0T74A-        /Z3           3l.3,
                                  /,    z3 V1.3 CoVCRd-6                                       =- 7-1 /*
* jrr   '/&#x17d;3/o Pq          3 " tz, (,

(                                                    Report No: 2R9-060 Location of the IRH-HX2B-08D MT Indication
(
Indication is on the edge of the plate in the center of the marked area.
Page 4/1of 6

5L-eT 5R     /".
A'a  z AI- a 4 Wt (of *!Ze 14 - Hy z 6 --0 f I>
C 4 4 Af~~~~~
o   OfICi 9 Fron~-        Tke     --
                               -i-  VF CATh-k.to-edi     of- f~
f;~-~-
* 0  r6

(Report                                                    No: 2R9-060 IRH-HX2B-08D, 09D, and 010D
(       General view of the support showing the 8, 9, and 10 welds.
Location of the limitation on the 8 weld Page ( of

GE Energy Nuclear UT Examination Summary                                                   Report No. 2R10-007 Project:             LaSalle Unit-2, L2R10 Component ID:        LCS-2-AE System:              RPV Calibration ID:     -e,*.E.4,-     03 O&S. IfI? c'-,
GERIS Data:          UP and DN scan files Manual Data:         RPV-010, RPV-011 Examiners:           C. Gauthier Lv. II,S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II,Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-704 V5 using 450 Shear wave, 60 RL&deg; and 700 RL search units, supplemental 0* L-wave scans were also performed.
Manual transverse and parallel scans were performed in accordance with procedure GE-UT-300 V8 using 60 RL&deg; search units.
Automated and manual scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 00 Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system and manual examinations recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated and Manual Composite Coverage = 58% Calculated as % of 1800 length.
29% Calculated as % of 3600 length.
repared y:                   Reviewed 19y:               U-ility Revieweo:y:          ANII Reviewed By:
Date:3/Z/'O5                   Date:  3..5             Date                         Date:
LaSalle Unit-2, L2R1O                                                                              Page 1 of 17-

C,)
Summary No.: 2R10-007 C
Weld LCS-2-AE 2.
LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                    LENGTH CALCULATIONS Percent Weld Length = 418.6 Required Exam Area Scanned                of Area       Weld Length      Percent Exam Volume = 75.6          Area Sq. In.        Auto              Auto           Auto            Auto 700 T-Scan         A           14.8              6.2             8.2%           370.5           3.6%
450 T-Scan         A           48.9             42.4            56.1%           370.5          24.8%
600 T-Scan         A           11.9              6.0             7.9%           370.5           3.5%
700 P-Scan         A           14.8              4.9             6.5%           370.5           2.9%
450 P-Scan         A           48.9             25.2            33.3%           370.5          14.8%
600 P-Scan         A           11.9              5.3             7.0%           370.5           3.1%
70_T-Scan 450 T-Scan 600 T-Scan 0
70' P-Scan 450 P-Scan 60* P-Scan Manual                                           0.0%
600 S4 T-Scan        B           11.9              5.0             6.6%             48            0.4%
60* S6 T-Scan        B           63.7             52.3            69.2%             48           4.0%
60 0 S4 P-Scan       B           11.9              5.3             7.0%             48           0.4%
600 S6 P-Scan        B           63.7              5.3             7.0%             48           0.4%
                                                                                     % Total Composite Coverage =       58%
Comments:     A - Automated coverage.
B - Manual scanning in an area limited to the automated device due to thermocouple pads at 00 Az.
Coverage calculated as percent of scheduled examination from 00 to 1800.
Note - Rounding methods may affect calculated values.

Summary No.: 2R10-007 C',
C                                                                 Weld LCS-2-AE LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                    LENGTH CALCULATIONS Percent Weld Length= 837.2 Required Exam Area Scanned                 of Area       Weld Length      Percent Exam Volume = 75.6         Area Sq. In.          Auto             Auto           Auto           Auto 70" T-Scan        A            14.8              6.2             8.2%           370.5           1.8%
450 T-Scan        A            48.9             42.4             56.1%          370.5          12.4%
60' T-Scan        A            11.9              6.0             7.9%           370.5           1.7%
70* P-Scan        A            14.8              4.9             6.5%           370.5           1.4%
45' P-Scan        A            48.9             25.2             33.3%          370.5          7.4%
600 P-Scan        A            11. 9             5.3             7.0%           370.5           1.6%
70_T-Scan 450 T-Scan 60' T-Scan 700 P-Scan 450 P-Scan 600 P-Scan Manual                                           0.0%
60' S4 T-Scan        B           11.9              5.0             6.6%             48           0.2%
60' S6 T-Scan        B           63.7             52.3            69.2%             48           2.0%
60&deg; S4 P-Scan        B           11.9              5.3             7.0%             48           0.2%
600 S6 P-Scan       B            63.7              5.3             7.0%             48           0.2%
                                                                                     % Total Composite Coverage =       29%
Comments:     A - Automated coverage.
0 B - Manual scanning in an area limited to the automated device due to thermocouple pads at 00 Az.
~I1 Coverage calculated as percent of full weld.
Note - Rounding methods may affect calculated values.

i_                                                            LaSalle Unit-2 CShell 2.
to Flange Weld PO 0,                                                           70' Exam Volume = 14.8 Sq. In.
450 Exam Volume = 48.9 Sq. In.
60" Exam Volume = 11.9 Sq. In.
70&deg; T-Scan achieved = 3.5 Sq. In.
I5SI1450                                                 T-Scan achieved = 2.9 Sq. In.
600 T-Scan achieved = 0.0 Sq. In.
70&deg; P-Scan achieved = 4.9 Sq. In.
450 P-Scan achieved = 25.2 Sq. In.
600 P-Scan achieved = 5.3 Sq. In.
P/T-Scans
____  ___                           I 0 . " Looking DNScans-      .0 0
:=L -i~-_-
fz-      - - - - -

CD, LaSalle Unit-2 C                                 Shell to Flange Weld 700 Exam Volume = 14.8 Sq. In.
450 Exam Volume = 48.9 Sq. In.
600 Exam Volume = 11.9 Sq. In.
700 T-Scan achieved = 6.2 Sq. In.
450 T-Scan achieved = 42.4 Sq. In.
600 T-Scan achieved = 11.9 Sq. In.
700 P-Scan achieved = 4.9 Sq. In.
450 P-Scan achieved = 25.2 Sq. In.
600 P-Scan achieved = 5.3 Sq. In.
P-Scans  70&deg;T                   45&deg;T        60'T I      I                      I           I
                          -1 0,
Scanner Motion Looking UP Scans 0.0"                                                     -20.75"
 -h
    -Z i - - - -      --   -   --

_LaSalle                                         Unit-2 Shell to Flange Weld C) 0 C-n                            600 S4 Exam Volume = 11.9 Sq. In.
60&deg; S6 Exam Volume = 63.7 Sq. In.
600 S4 T-Scan achieved = 11.9 Sq. In. LKUP 600 S6 T-Scan achieved = 52.3 Sq. In. LKUP 600 S4 T-Scan achieved = 0.0 Sq. In. LKDN 60' S6 T-Scan achieved = 6.9 Sq. In. LKDN 600 S4 P-Scan achieved = 5.3 Sq. In. CW/CCW 600 S6 P-Scan achieved = 30.0 Sq. In. CW/CCW
            //
          /
60 P 60'P-Scans                                        60&deg;T
-D 0

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                       2RIO-004 GE NUCLEAR ENERGY Site:          LaSalle Unit-2            Component ID:                      GEL-1061-DA Outage:               L2RIO0                                                           Bot. Hd. Meridional System               RPV              ASME Cat.:       B-A          ASME Item:           B1.22       Aug Requirements:       NIA Exams Performed: Data Sheet           Cal Sheet            Procedure        Calibration Block,    Examination     Cert Leveli     Date Personnel 600 Long.         RPV-003            N/A              GE-UT-300             IIW2-047         Scott Erickson       II      2/22/2005 600 Long.         RPV-004            N/A              GE-UT-300             01-92-06         Scott Erickson       II      2/23/2005 Examination Results:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed in accordance with procedure GE-UT-300 V8, using 60' RL-wave search units.
Scanning was performed from the vessel OD surface. Scanning was limited due to the vessel skirt attachment weld and an inaccessible inner skirt region..
No indications were recorded.
Manual coverage = 66%.
Examination results were compared to data report 4023,18011,3247 from             PSI     outage with
* No Change These examinations were performed under Work Order:          5849600                                         Change This Summary and the following data sheets have been redv      ed and acceptedby the following personnel:
Prepared By:                    Level:      Date:      Utility Review-                             Date:
ANII Review:                                Date:          Page    1   of

I-
'U                                                                                                                            Inspection Report No.: 2R10-004 C',
iF Bottom Head Meridionals GEL-1061-DA r'3 LaSalle Unit-2, L2R10 I-M 0                                                  CODE CROSS-SECTIONAL AREA                             TOTAL CODE COVERAGE Percent Weld Length =    80.4   Required Exam          Area Scanned            of Area         Weld Length           Percent Exam Volume =     60.2     Area Sq. In.              Auto                 Auto                Auto              Auto 60* S4 P-Scan LKDN        A            8.8                   8.8                 7.3%                 53               2.4%
600 S4 P-Scan LKUP        A            8.8                   8.8                 7.3%                 53               2.4%
600 S6 P-Scan         A           51.4                  51.4                85.4%                 53              28.1%
600 S4 T-Scan LKCW        A            8.8                   8.8                 7.3%6                53               2.4%
600 S4 T-Scan LKCCW        A            8.8                   8.8                 7.3%                 53               2.4%
60' S6 T-Scan         A            51.4                 51.4                85.4%                 53              28.1%
600  S4 P-Scan LKDN 600  S4 P-Scan LKUP 600 S6 P-Scan 600  S4 T-Scan LKCW 600  S4 T-Scan LKCCW_
600 S6 T-Scan 60' S4 P-Scan LKDN                                                                                                            "_
600 S4 P-Scan LKUP 60' S6 P-Scan 600 S4 T-Scan LKCW
 'U               600 S4 T-Scan LKCCW (0
CD                     600 S6 T-Scan
                                                                                                 % Total Composite Coverage =             66%
0   Comments:     A - Examined 53" of length. Scanning limited due to support skirt weld and inaccessible inner skirt region.
Note - Rounding methods may make calculated values appear in error.

LaSalle Unit-2 Bottom Head Meridional 600 S4 Exam Volume = 8.8 Sq. In.
60' S6 Exam Volume = 51.4 Sq. In.
600 S4 P-Scan LKDN achieved = 8.8 Sq. In.
600 S4 P-Scan LKUP achieved = 8.8 Sq. In.
60&deg; S6 P-Scan achieved = 51.4 Sq. In.
600 S4 T-Scan LKCW achieved = 8.8 Sq. In.
60&deg; S4 T-Scan LKCCW achieved = 8.8 Sq. In.
60' S6 T-Scan achieved = 51.4 Sq. In.

(
Lmax - 80.4" Lmin - 27.4" Weld Length - 80.4" Exam limited due to skirt weld.
LA SALLE L_
Rto pArc        I'- I

(t Site:          LaSalle Unit-2             Component ID:                      GEL-1061-DE Outage:                L2RIO                                                            Bot. Hd. Meridional System              RPV               ASME Cat.:      B-A         ASME Item:             BI.22      Aug Requirements:       NIA Exams Performed       Data Sheet        Cal Sheet           Procedure         Calibration Block    Examination     Cert Level0     Date Personnel 60&deg; Long.         RPV-001             N/A             GE-UT-300        i     IIW2-047         Wallace Reid        II      2/23/2005 60* Long.         RPV-002             N/A             GE-UT-300              01-92-06         Wallace Reid        II      2/23/2005 Examination Results:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed in accordance with procedure GE-UT-300 V8, using 600 RL-wave search units.
(,,   Scanning was performed from the vessel OD surface. Scanning was limited due to the vessel skirt attachment weld and an inaccessible inner skirt region.
No indications were recorded.
Manual coverage = 66%.
Examination results were compared to data report 4023,18012,3247 from              PSI    outage with    ,. No Change These examinations were performed under Work Order:           5849600                                         Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:
     "repared     By:                  Level:      Date      Utility R:                                  Date:
ANII Review:                                Date:          Page    1   of

Inspection Report No.: 2R10-005 Bottom Head Meridionals GEL-1061-DE LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                             TOTAL CODE COVERAGE Percent Weld Length =    80.4   Required Exam          Area Scanned            of Area         Weld Length           Percent Exam Volume =     60.2      Area Sq. In.             Auto                Auto                 Auto             Auto 600 S4 P-Scan LKDN        A             8.8                  8.8                7.3%                  53              2.4%
600 S4 P-Scan LKUP        A             8.8                  8.8                7.3%                  53               2.4%
600 S6 P-Scan         A            51.4                 51.4                85.4%                 53              28.1%
600 S4 T-Scan LKCW        A             8.8                  8.8                7.3%                  53               2.4%
600 S4 T-Scan LKCCW        A             8.8                  8.8                7.3%                  53              2.4%
600 S6 T-Scan         A            51.4                 51.4                85.4%                 53              28.1%
600 S4 P-Scan LKDN 600 S4 P-Scan LKUP 600 S6 P-Scan 600 S4 T-Scan LKCW 600 S4 T-Scan LKCCW_
60&deg; S6 T-Scan 600 S4 P-Scan LKDN 600 S4 P-Scan LKUP 600 S6 P-Scan 600 S4 T-Scan LKCW 600 S4 T-Scan LKCCW 600 S6 T-Scan
                                                                                             % Total Composite Coverage =             66%
Comments:     A - Examined 53' of length. Scanning limited due to support skirt weld and inaccessible inner skirt region.
Note - Rounding methods may make calculated values appear in error.

LaSalle Unit-2 Bottom Head Meridional 600 S4 Exam Volume = 8.8 Sq. In.
60&deg; S6 Exam Volume = 51.4 Sq. In.
60&deg; S4 P-Scan LKDN achieved = 8.8 Sq. In.
600 S4 P-Scan LKUP achieved = 8.8 Sq. In.
60&deg; S6 P-Scan achieved = 51.4 Sq. In.
600 S4 T-Scan LKCW achieved = 8.8 Sq. In.
600 S4 T-Scan LKCCW achieved = 8.8 Sq. In.
600 S6 T-Scan achieved = 51.4 Sq. In.

(
Lmax - 80.4" Lmin - 27.4" Weld Length - 80.4" Exam limited due to skirt weld.
  /
LA SALLE -
R 1(0      -- I/
n A I~P

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                        2R10-006 GE NUCLEAR ENERGY
(
Site:          LaSalle Unit-2             Component ID:                    GEL-1061-DF Outage:               L2R10                                                          Bot. Hd. Meridional System              RPV              ASME Cat.:        B-A        ASME Item:          B1.22      Aug Requirements:          NIA Exams Performed: Data Sheet           Cal Sheet           Procedure       Calibration Block     Examination     Cert Leve-        Date Personnel 60* Long.        RPV-005             N/A              GE-UT-300           IIW2-047        Scott Erickson        II        2123/2005 600 Long.        RPV-006             N/A              GE-UT-300           01-92-06        Scott Erickson        II        2/23/2005 Examination Results:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed in accordance with procedure GE-UT-300 V8, using 60' RL-wave search units.
Scanning was performed from the vessel OD surface. Scanning was limited due to the vessel skirt attacltment weld and an inaccessible
(. inner skirt region.
No indications were recorded.
Manual coverage = 66%.
Examination results were compared to data report 4032,18011,3247 from           PSI    outage with     vi   No Change These examinations were performed under Work Order:          5849600                                    _. Change This Summary and the following data sheets have been reviwd and accepted by the following personnel:
Prepared By                     Level:      Date:      U      eie                                Date:
ANII Review:                              Date:          Page    1     of

U-                                                                                                                            Inspection Report No.: 2R10-006 Bottom Head Meridionals GEL-1061-DF LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                              TOTAL CODE COVERAGE Percent Weld Length = 80.4       Required Exam         Area Scanned            of Area         Weld Length           Percent Exam Volume = 60.2         Area Sq. In.              Auto                Auto                 Auto             Auto 600 S4 P-Scan LKDN        A             8.8                  8.8                7.3%                  53              2.4%
600 S4 P-Scan LKUP        A             8.8                  8.8                7.3%                  53              2.4%
600 S6 P-Scan         A            51.4                 51.4                85.4%                 53              28.1%
600 S4 T-Scan LKCW        A             8.8                  8.8                7.3%                  53              2.4%
600 S4 T-Scan LKCCW A                    8.8                  8.8                7.3%                  53              2.4%
600 S6 T-Scan         A            51.4                 51.4                85.4%                 53              28.1%
 -C                60004   P-Scan LKDN 600  S4 P-Scan LKUP 0                      600 S6 P-Scan 600 S4 T-Scan LKCW 600 S4 T-Scan LKCCW_
600 S6 T-Scan 600 S4 P-Scan LKDN 600 S4 P-Scan LKUP 600 S6 P-Scan 600 S4 T-Scan LKCW 600 S4 T-Scan LKCCW_
600 S6 T-Scan
                                                                                                  % Total Composite Coverage =            66%
Comments:     A - Examined 53" of length. Scanning limited due to support skirt weld and inaccessible inner skirt region.
Note - Rounding methods may make calculated values appear in error.

LaSalle Unit-2 Bottom Head Meridional 60&deg; S4 Exam Volume = 8.8 Sq. In.
600 S6 Exam Volume = 51.4 Sq. In.
60' S4 P-Scan LKDN achieved = 8.8 Sq. In.
60' S4 P-Scan LKUP achieved = 8.8 Sq. In.
600 S6 P-Scan achieved = 51.4 Sq. In.
60&deg; S4 T-Scan LKCW achieved = 8.8 Sq. In.
600 S4 T-Scan LKCCW achieved = 8.8 Sq. In.
60&deg; S6 T-Scan achieved = 51.4 Sq. In.

x        I- I-
: 5. 3 0) r-     x CD 0O CDO co 0U)    =
CD C CD.

_          GE Energy Nuclear UT ExaminationSummary                                                  Report No. 2R10-010 Project:             LaSalle Unit-2, L2R1O Component ID:        LCS-2-N2B System:              Recirculation Inlet Calibration ID:      01NOZIN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II, S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 70&deg; RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 00 Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage        = 70%.
lreparea By:                   Reviewed 6y:                 -Utility Reviewed By:     ANII Reviewed By:
DDate:Date:                              *-,6-.5             Date                 -   Date:
LaSalle Unit-2, L2R1O                                                                            Page 1 of

Inspection Report No.: 2R10-010 Cl) rI-C O)                                                          Recirculation Inlet LCS-2-N2B 01                                                              LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length = 360.       Required Exam         Area Scanned          of Area       Weld Length          Percent Exam Volume = 59.1          Area Sq. In.             Auto               Auto            Auto               Auto 700 T-Scan         A            11.4                   5.8              9.8%             360              4.9%
450 T-Scan          A           39.2                  33.5             56.7%             360              28.3%
600 T-Scan         A            8.5                    8.5             14.4%             360               7.2%
70&deg; P-Scan         A            11.4                  4.5               7.6%             360               3.8%
450 P-Scan         A            39.2                  22.5             38.1%             360              19.0%
Inner 15%T P-Scan      A            8.5                    8.5             14.4%             360               7.2%
70&deg; T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan 70* T-Scan 450 T-Scan 600 T-Scan 700 P-Scan                                                                                   _    ,_
450 P-Scan Inner 15%T P-Scan
                                                                                             % Total Composite Coverage =         70%
0
-0.
Comments:     A - Examined 3600 of length. Scanning limited due to nozzle configuration.
H                 Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

0)
CD, C
2.
LaSalle Unit-2 0n 0
Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"
    /
70'T          45=T              60'T I                 I
-0 0)
             -----1>
0

LaSalle Unit-2 0                                     Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
   /                           70'P 45&deg;P,
( _______
-D CO CD 00 I
0

GE Energy Nuclear UT Examination Summary                                                Report No. 2R10-011 Project:             LaSalle Unit-2, L2R10 Component ID:        LCS-2-N2C System:              Recirculation Inlet Calibration ID:      01NOZIN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II, S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 700 RL search units, supplemental 0&deg; L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 60&deg; Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 0' Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
LL                                                                                                                I LaSalle Unit-2, L2R1O                                                                          Page 1 of  (I

I'-
Inspection Report No.: 2R10-01 1 C
Recirculation Inlet LCS-2-N2C I-"
LaSalle Unit-2, L2R10 N,
CODE CROSS-SECTIONAL AREA                           TOTAL CODE COVERAGE Percent Weld Length = 360.         Required Exam       Area Scanned             of Area      Weld Length          Percent Exam Volume = 59.1            Area Sq. In.           Auto                  Auto           Auto               Auto 70' T-Scan          A             11.4                 5.8                 9.8%           308.4              4.2%
450 T-Scan          A             39.2                33.5                56.7%           308.4             24.3%
600 T-Scan          A              8.5                 8.5                14.4%           308.4              6.2%
700 P-Scan          A             11.4                 4.5                 7.6%           308.4              3.3%
450 P-Scan          A             39.2                22.5                38.1%           308.4             16.3%
Inner 15%T P-Scan       A              8.5                 8.5                14.4%           308.4              6.2%
700 T-Scan          B             11.4                 5.8                 9.8%            51.6              0.7%
450 T-Scan          B             39.2                33.5                56.7%            51.6             4.1%
600 T-Scan          B              8.5                 4.8                 8.1%            51.6              0.6%
70* P-Scan          B             11.4                 4.5                 7.6%            51.6              0.5%
450 P-Scan          B             39.2                22.5                38.1%            51.6             2.7%
Inner 15%T P-Scan       B              8.5                 8.5                14.4%            51.6              1.0%
70' T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 45' P-Scan (0Q Inner 15%T P-Scan CD                                                                                             % Total Composite Coverage =         70%
Comments:     A - Examined 308.40 of length. Scanning limited due to proximity of N9 nozzle, B - Examined 51.60 of length in area of N9 nozzle.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

CD LaSalle Unit-2 CD'                        Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
70' T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
i, / 17.25" 70'T         45&deg;T               60'T I            I I
CD              - - ----
I 0

C)
C)          LaSalle Unit-2 Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 6.6 Sq. In.
CD Limited area due to N9.
17.25" I           70&deg;T I
45'T I
60'T I
0D

CI)
CD LaSalle Unit-2 01                         Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
     /             70&deg;P 45"P F-CD F-----
I 0ft4

Unlimited scan area.
24" Arm
                           -7 E    N2-D                              N 00 N9-A iL C*

_        GE Energy Nuclear UT ExaminationSummary                                                Report No. 2R10-014 Project:             LaSalle Unit-2, L2R1O Component ID:        LCS-2-N2F System:              Recirculation Inlet Calibration ID:      01NOZ.IN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II,S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II,Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 70* RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 0' Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
Prepared By:                   Reviewed Ely:               Utility Reviewed By:      ANII Reviewed By:
Date:2     1  0 -5             Date:     ;L  -a6    S--    Date    7  -         -    Date:
LaSalle Unit-2, L2R1O                                                                           Page 1 of 1)

(n                                                                                                                 Inspection Report No.: 2R10-014 9i CD C                                                         Recirculation Inlet LCS-2-N2F LaSalle Unit-2, L2R10 0                                               CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length =   360. Required Exam         Area Scanned          of Area      Weld Length          Percent Exam Volume =    59.1      Area Sq. In.             Auto              Auto             Auto              Auto 700 T-Scan        A            11.4                  5.8              9.8%              360              4.9%
450 T-Scan        A            39.2                 33.5              56.7%             360             28.3%
60' T-Scan        A             8.5                  8.5              14.4%             360              7.2%
700 P-Scan        A            11.4                  4.5              7.6%              360              3.8%
450 P-Scan        A            39.2                 22.5              38.1%             360             19.0%
Inner 15%T P-Scan     A             8.5                  8.5              14.4%             360              7.2%
70' T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan 700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan CD Inner 15%T P-Scan
                                                                                           % Total Composite Coverage =        70%
0  Comments:    A - Examined 3600 of length. Scanning limited due to nozzle configuration.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

CD LaSalle Unit-2 Recirculation Inlet 700 Exam Volume = 11.4 Sq In.
450   Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"     70&deg;T         45&deg;T              60 'T
-o

C))
0)
LaSalle Unit-2 Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
70' P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model)
CD 17.25"
    /                         70'P 45&deg;P I ________
                           *I        I
                                        -----H I
0

GE Energy Nuclear UT Examination Summary                                                Report No. 2R10-015 Project:             LaSalle Unit-2, L2R1O Component ID.:       LCS-2-N2G System:              Recirculation Inlet Calibration ID:      01NOZIN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II,S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL' and 700 RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0" references are located at Vessel 0' Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
LL LaSalle Unit-2, L2R1O                                                                          Page 1 of  I-

Inspection Report No.: 2R10-015 ch 9L CD Recirculation Inlet LCS-2-N2G LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length = 360.       Required Exam         Area Scanned          of Area      Weld Length          Percent Exam Volume = 59.1          Area Sq. In.             Auto               Auto            Auto              Auto 70* T-Scan         A            11.4                  5.8               9.8%             360              4.9%
450 T-Scan         A            39.2                  33.5             56.7%             360             28.3%
600 T-Scan         A             8.5                  8.5              14.4%             360              7.2%
70' P-Scan         A            11.4                  4.5               7.6%             360              3.8%
450 P-Scan         A            39.2                 22.5              38.1%             360             19.0%
Inner 15%T P-Scan      A             8.5                  8.5              14.4%             360              7.2%
700 T-Scan 450 T-Scan 600 T-Scan 70_P-Scan 450 P-Scan Inner 15%T P-Scan 70o T-Scan 450 T-Scan 60' T-Scan 700 P-Scan 45' P-Scan (D                Inner 15%T P-Scan
                                                                                            % Total Composite Coverage =        70%
0  Comments:     A - Examined 3600 of length. Scanning limited due to nozzle configuration.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

0, C,,
CD C>
LaSalle Unit-2 C)
Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
700 T-Scan achieved'= 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
CD, 17.25"
    /                  707T I
457T I
607T
-J           ---- 1 0)
Co I

O,)
C/
LaSalle Unit-2 0
0 C:'
Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
    /                               70TP 45&deg;P I  _______
I    I I--                     ----- A 0

GE Energy Nuclear UT Examination Summary                                               Report No. 2R10-016 Project:             LaSalle Unit-2, L2R10 Component ID:        LCS-2-N2H System:              Recirculation Inlet Calibration ID:      O1NOZ.IN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II,S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II,Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 700 RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 0&deg; Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
Prepared By:                   Rewed By:                   Ut   Re.viewed By:        ANII Reviewed By:
Date:                          Date:                       Date                      Date:
agelf   I La~ale Uit-, L210 LaSalle Unit-2, L2R1O                                                                           Page 1 of I I

Inspection Report No.: 2R10-016 Recirculation Inlet LCS-2-N2H LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length = 360.         Required Exam       Area Scanned            of Area      Weld Length          Percent Exam Volume = 59.1            Area Sq. In.           Auto                  Auto           Auto              Auto 700 T-Scan          A             11.4                 5.8                 9.8%           308.4             4.2%
450 T-Scan          A             39.2                33.5                56.7%           308.4            24.3%
600 T-Scan          A              8.5                 8.5                14.4%           308.4             6.2%
700 P-Scan          A             11.4                 4.5                 7.6%           308.4             3.3%
45' P-Scan          A             39.2                22.5                38.1%           308.4            16.3%
Inner 15%T P-Scan       A              8.5                 8.5                14.4%           308.4             6.2%
-U Q)                    70' T-Scan          B             11.4                 5.8                 9.8%            51.6             0.7%
450 T-Scan          B             39.2                33.5                56.7%            51.6            4.1%
600 T-Scan          B              8.5                 4.8                 8.1%            51.6             0.6%
700 P-Scan          B             11.4                 6.6                11.2%            51.6             0.8%
450 P-Scan          B&#xfd;            39.2                22.5                38.1%            51.6             2.7%
Inner 15%T P-Scan       B              8.5                 8.5                14.4%            51.6             1.0%
70&deg; T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan
: 0)                                                                                            % Total Composite Coverage =        70%
Comments:     A - Examined 308.40 of length. Scanning limited due to proximity of N9 nozzle.
B - Examined 51.60 of length in area of N9 nozzle.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

CD LaSalle Unit-2 0
Recirculation Inlet 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60*T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
60' T-Scan achieved = 8.5 Sq. In.
0 17.25"
   /                   707T          45&deg;T              60'T I              I                 I
            ~~~~17<
I

I-CD)
C:
=.3          LaSalle Unit-2 0
0 Recirculation Inlet 70' Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
60' T-Scan achieved = 6.6 Sq. In.
Limited area due to N9.
17.25" I           70'T I
45*T    60*T I        I CD 00 0

I-"
Cn CD LaSalle Unit-2 Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model)
CD
-o 0
 -4'        17.25"
     /             70op 45oP I    I K----
-J F-----
"K 0)

Unlimited scan area.
24" Arm N2-J N9-B                T/C PADS C,,
I-I-
Ph 0

GE Energy Nuclear UT ExaminationSummary                                                Report No. 2R10-017 Project:             LaSalle Unit-2, L2R1O Component ID:        LCS-2-N2J System:              Recirculation Inlet Calibration ID:      01NOZ.IN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II,S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part I, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL0 and 700 RL search units, supplemental 0&deg; L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated uT system "0"references are located at Vessel 0&deg; Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
LaSalle Unit-2, L2R1O                                                                          Page I of  "

Inspection Report No.: 2R10-017 CO)
Ui)
(D Recirculation Inlet LCS-2-N2J LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                         TOTAL CODE COVERAGE Percent Weld Length = 360.         Required Exam       Area Scanned            of Area      Weld Length           Percent Exam Volume =     59.1         Area Sq. In.           Auto                 Auto           Auto               Auto 700 T-Scan          A              11.4                5.8                 9.8%           307.2              4.2%
450 T-Scan          A             39.2                33.5                56.7%           307.2             24.2%
60&deg; T-Scan          A              8.5                 8.5                14.4%           307.2              6.1%
70_P-Scan           A              11.4                4.5                 7.6%           307.2              3.2%
450 P-Scan          A             39.2                22.5                38.1%           307.2             16.2%
T                  Inner 15%T P-Scan       A              8.5                 8.5                14.4%           307.2              6.1%
700 T-Scan          B              11.4                5.8                 9.8%            52.8              0.7%
450 T-Scan          B       _     39.2                33.5                56.7%            52.8             4.2%
0                      60' T-Scan          B              8.5                 7.5                12.7%            52.8              0.9%
70' P-Scan          B              11.4                4.5                 7.6%            52.8              0.6%
450 P-Scan          B             39.2                22.5                38.1%            52.8             2.8%
Inner 15%T P-Scan       B              8.5                 8.5                14.4%            52.8              1.1%
700 T-Scan 450 T-Scan 600 T-Scan 70' P-Scan 450 P-Scan Inner 15%T P-Scan
                                                                                               % Total Composite Coverage =         70%
Comments:     A - Examined 308.4' of length. Scanning limited due to proximity of N9 nozzle.
B - Examined 51.60 of length in area of N9 nozzle.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

c-LaSalle Unit-2 Recirculation Inlet 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
70&deg; T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
-13 0
17.25" 70OT         457T               60&deg;T I           I                  I
    /I
              --- H I

                                                                -1 0,
CD, 0,
LaSalle Unit-2 0
Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 7.5 Sq. In.
Limited area due to N9.
17.25" I                  70'T          45&deg;T        60'T I             I            I K---
                - I 0)

C/)
CD LaSalle Unit-2 0
U1 Recirculation Inlet 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
70&deg; P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25" I
F------
70iP45i cc I
0

Unlimited scan area.
24" Arm N2-H 0
N9-B      T/C PADS
                          )
V

GE Energy Nuclear
(              UT Examination Summary                                                Report No. 2R10-018 Project:             LaSalle Unit-2, L2R10 Component ID:        LCS-2-N2K System:              Recirculation Inlet Calibration ID:      01NOZIN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II, S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 700 RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 45* and 60&deg; Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0" references are located at Vessel 00 Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 70%.
I LaSalle Unit-2, L2R1 0                                                                         Page 1 of   10

Inspection Report No.: 2R10-018 Recirculation Inlet LCS-2-N2K LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length = 360.       Required Exam         Area Scanned          of Area      Weld Length           Percent Exam Volume = 59.1          Area Sq. In.             Auto               Auto            Auto               Auto 70&deg; T-Scan         A            11.4                  5.8               9.8%             360               4.9%
450 T-Scan         A            39.2                  33.5             56.7%             360              28.3%
600 T-Scan         A             8.5                   8.5             14.4%             360               7.2%
700 P-Scan         A            11.4                  4.5               7.6%             360               3.8%
450 P-Scan_        A            39.2                  22.5             38.1%             360              19.0%
Inner 15%T P-Scan      A             8.5                   8.5             14.4%             360               7.2%
700 T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan 70_T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan
                                                                                            % Total Composite Coverage =         70%
Comments:     A - Examined 3600 of length. Scanning limited due to nozzle configuration.
ho               Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

On a
C')
C 0.
N)
LaSalle Recirculation InletUnit-2 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0 T) = 8.5 Sq. In.
707 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
707T         45&deg;T               60'T I I CD 0

C),
Cz
:3 LaSalle Unit-2 C-fl                                     Recirculation Inlet 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60&deg;T) = 8.5 Sq. In.
70&deg; P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25" I                         70'P 45 0 P I     I I
K----
                        -- 4 4
 ")
                        ---- 1 Jl   I    I 0

GE Energy Nuclear
(               UT Examination Summary                                                  Report No. 2R10-019 Project:             LaSalle'Unit-2, L2R10 Component ID:        LCS-2-N3A System:              Main Steam Calibration ID:      03NOZ.IN GERIS Data:          TL, P1 and 70TP scan files Manual Data:         N/A Examiners:           C. Gauthier Lv. II, S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section XI, 1989 Edition No Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4 using 450 Shear wave, 60 RL&deg; and 70" RL search units, supplemental 00 L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 450 and 600 Shear wave search units as specified by the "Nozzle Inner Radius and Bore Requirements" sheet, which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0" references are located at Vessel 0QAzimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 68%.
7-1/
  "P1epared By-                   Reviewed   y:                Utility Reviewed By:        ANII Reviewed By:
Date: Z/      ,{OS             Date:    AZ - z 4            Date       2--      QI-O -- Date:
LaSalle Unit-2, L2R1O                                                                              Page 1 of -I-

Inspection Report No.: 2R10-036 Ul)
Main Steam LCS-2-N3A LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length =    360. Required Exam         Area Scanned          of Area      Weld Length           Percent Exam Volume =     77.2      Area Sq. In.             Auto               Auto            Auto              Auto 700 T-Scan         A            14.1                   6.3              8.2%             360              4.1%
450 T-Scan         A            52.1                  43.5             56.3%             360              28.2%
60' T-Scan         A            11.0                  11.0             14.2%             360              7.1%
700 P-Scan         A            14.1                   5.0              6.5%             360               3.2%
450 P-Scan         A            52.1         1        28.2             36.5%             360              18.3%
Inner 15%T P-Scan. A            11.0                  11.0             14.2%             360              7.1%
CD 70' T-Scan 450 T-Scan 0                     600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan 700 T-Scan 45' T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan
                                                                                            % Total Composite Coverage =         68%
Comments:    A - Examined 3600 of length. Scanning limited due to nozzle configuration.
-4, Inner 15%T P-Scan area by modeling.
Note- Rounding methods may make calculated values appear in error.

Cl LaSalle Unit-2 DMain                          Steam 70&deg; Exam Volume = 14.1 Sq. In.
450 Exam Volume = 52.1 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 11.0 Sq. In.
70&deg; T-Scan achieved = 6.3 Sq. In.
450 T-Scan achieved = 43.5 Sq. In.
600 T-Scan achieved = 11.0 Sq. In.
[70OT                             45&deg;T               60'T T/
I  I                  I V       -1

C' Cn LaSalle Unit-2 Main Steam 700 Exam Volume = 14.1 Sq. In.
450 Exam Volume = 52.1 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 11.0 Sq. In.
700 P-Scan achieved = 5.0 Sq. In.
450 P-Scan achieved = 28.2 Sq. In.
IRS P-Scan achieved = 11.0 Sq. In. (By model)
   /
H-----
I        ---- 4 CD CO
       ---I 0

GE Energy Nuclear UT Examination Summary                                  Report No. 2R10-020 Project:       LaSalle Unit-2, L2R1O Weld ID:       LCS-2-N3B System:        Main Steam Calibration ID:       03NOZ.IN GERIS Data:          TL, P1 and 70TP scan files.
Manual Data:          N/A Examiners:            C. Gauthier Lv. II, S. Gauthier Lv. II Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code, Section Xl, 1989 Edition No Addenda, also Section Xl, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-A Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedure GE-UT-705 V4, using 450 Shear wave, 600 RL and 700 RL search units, supplemental 0' L-wave scans were also performed.
Scanning of the inner 15%T volume for radial flaws was performed using 600 Shear waves as specified by the "Nozzle Inner Radius and Bore Requirements" sheet which has been verified by modeling.
Automated scanning was performed from the vessel OD surface.
For calibration records refer to report G2K-CAL-1.
The GERIS 2000 OD automated UT system "0"references are located at Vessel 0" Azimuth and Vessel 0 Elevation.
The GERIS 2000 OD system recorded no indications.
Previous examination results were reviewed and no changes were noted.
Automated Composite Coverage = 68%.
LaSalle Unit-2, L2R1O                                                               Page    I  of 9

Inspection Report No.: 2R10-020 Cl)
R1 CD Main Steam LCS-2-N3B LaSalle Unit-2, L2R10 CODE CROSS-SECTIONAL AREA                          TOTAL CODE COVERAGE Percent Weld Length = 360.      Required Exam         Area Scanned          of Area       Weld Length          Percent Exam Volume = 77.2          Area Sq. In.             Auto               Auto            Auto               Auto 700 T-Scan         A            14.1                  6.3               8.2%             360               4.1%
450 T-Scan         A            52.1                 43.5              56.3%             360              28.2%
60 0 T-Scan        A            11.0                  11.0             14.2%             360               7.1%
70" P-Scan         A            14.1                  5.0               6.5%             360               3.2%
450 P-Scan         A            52.1                 28.2              36.5%             360              18.3%
Inner 15%T P-Scan      A            11.0                  11.0             14.2%             360               7.1%
(D 700 T-Scan 450 T-Scan 0                       600 T-Scan 700 P-Scan 450 P-Scan Inner 15%T P-Scan 70_T-Scan 450 T-Scan 600 T-Scan 700 P-Scan 450 P-Scan Inner I 5%T P-Scan h1
                                                                                              % Total Composite Coverage =         68%
Comments:     A - Examined 3600 of length. Scanning limited due to nozzle configuration.
Inner 15%T P-Scan area by modeling.
Note - Rounding methods may make calculated values appear in error.

I--
C LaSalle Unit-2 C) 0
(               Main Steam 70' Exam Volume = 14.1 Sq. In.
45&deg; Exam Volume = 52.1 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 11.0 Sq. In.
70&deg; T-Scan achieved = 6.3 Sq. In.
450 T-Scan achieved = 43.5 Sq. In.
600 T-Scan achieved = 11.0 Sq. In.
       /
      /               70&deg;T            45&deg;T                607T I               I                   I t                    --
CD 0
h

I-C LaSalle Unit-2 0
0 01           Main Steam 70&deg; Exam Volume = 14.1 Sq. In.
450 Exam Volume = 52.1 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 11.0 Sq. In.
700 P-Scan achieved = 5.0 Sq. In.
450 P-Scan achieved = 28.2 Sq. In.
IRS P-Scan achieved = 11.0 Sq. In. (By model)
CD 70'P 4 5 oP I     I Hi l/
"10      -l CD

EXAMINATION 

==SUMMARY==
SHEET 0             GE NUCLEAR ENERGY                                          LaSalle Unit 2 L2R10 RPV-SS-2                             ATT                           RPV                    B-K                        Sec. XI Component ID:                     Configuration:                   System:             ASME Cat:                   Exam Credit.:
Examination        Ceit         Exam                Exams          Data         Cal              Procedure     Revision       Calibration Personnel         Level      Completed           Performed        Sheet        Sheet                                           Block W. Lt DeBusk               I1        2/26/05                PT           PT-06        N/A              GE-PT-10OVer.4                   N/A VT-I         05-198        N/A             ER-AA-335-014 R.1                 N/A Examination Results:
During the liquid penetrant and visual examinations of the above referenced weld, no recordable indications were detected.
Due to adajacent structures only 52% of the required examination area was accessable for inspections. Due to this limiting condition a VT-1 examination was performed on 100% of the required examination area.
This examination meets the requirements of ASME Section Xl, 1989 Edition, no Addenda Examination results were compared to datareport             None        from          N/A      outage with       N/A   No Change These examinations were performedunder Work Order:          5849600                                                N/A   Change This Summary and the following data sheets have been reviewed and accepted bv the following personnel ,
_-                                                       fiu 't gr          /nnelDose:                20       mr.
Gevie        B                    Level:      Date:       Reviewed By:

==Title:==
Date:
Reviewed BY:                      Level:      Date:       ANI Reviewed By:

==Title:==
Date:             Page  1 of       3

GE Nuclear Energy                                    LIQUID PENETRANT EXAMINATION REPORT
(  Site: LaSalle                                Unit: 2            Project:      L2RIO               Report Number:                2R10-061 Data Sheet:                   PT-06 Component ID: RPV-SS 2                                                Configuration:    Attachment Drawing:         GEL-1119 / VPF 3073-080-2                            System:          RPV Procedure No.:           GE-PT-1O0 Ver4 Material:                        Surface Condition:                       Item:
SA-533                           As-found/Cleaned                         Weld Technique                                                                                    Cleaner            Penetrant          Developer Visible Solvent Removable (B-3)                                Manufacturer:              Ma-anaflux           Magnaflux           Magnaflux Thermometer:       241997                                       Brand / Type:                 SKC-S                SKL-SP             SKD-S2 Temperature:       88*F                                        Batch No.:                     03LOK                01HO4K             03A03K 2
Black Light:       N/A                                   Light Meter  N/A                           Blacklight Intensity:         N/A    piW/cm Pre-Clean Method:                Siray / Wipe                                     Exam Start:                0240 /2/26/05 Penetrant Application            Brush                                            Drying Time:
Dwell Time:                 10 Penetrant Removal:               Wipe with dry towel Wipe with damp towel                             Drying Time:                5 Developer Application:          Snray                                            Developing Time:            7 Comments I Indications I Limitations:
PT examination performed on accessabie areas of the                                          ./
attachment lug. See sketch for examination area.
52% of the required area was examined.
No recordable indications were detected.
                                                                                               '                                      1 iIi
[NA CC C(SSi h 6 SW. L. DeBusk                      11      2/26/05 Initials:  Examiner:                     Level:    Exam Date:          Reviewed By:                         Date:
3'                                        2g"                                      Pge            o U5 o
GF-evled                                  Level:        Date:            ANII Reviewed By:                    Date:        Form:Pipc Wdd Rmord #   146

ER-AA-335-014 QLL 3
4 ~ Revision I  I ATTACHMENT I VT-1 Visual Examination Record
* Component

== Description:==
R ]t" c AneA,j -                       Sheet No. 05- 1 c8 Date: 2/    6/O/SWO No. 58$9(600                           Procedure: ER-RR-33S-O0g               Rev. I Thickness:         AJ/ 1A                 Visual Method:                Direct X                  Remote MaterlalToo: C          -S     S39        VisualAids: FL-s             Lo&.
Li          '     /76N         C Surface:        1D            OD X        M&TE:             NJ/A Items ln~eed(l'N):           R2 V,-'S ;         /h':ral  *,,l-Locateon: )rv*&#xa2;elC 804. ,               CID'o I.D.              IN         LEGHWDHAC                             RINPCO                       LVL Numbe    IND#      TYP     ENT            WDH                   UNACC       SIGNATURE/DATE Comments/Sketch:                                                                Defect Code:
4o recor**-a he ;**,'oc              h5         Wewre A'ote-7          Wear-W.
Jc~s,'~s~oe7'7~~j'fa(         ~o~ ~Corrosion-CR Damage-D Erosion-ER Cracds-C VT-1 INSPECTOR SIGNATURE/LEVEL/DATE 1                      U         f/*.*
Overall results: Acceptable            QVes       ONo                            W t- De6usk Additional Actions:               4,,,-
                                    ,. &#xfd;      -
(Action Request, Work Order, Condition Report, etc. initiated)
(                                         LX LEVEL III SIGNATURE               DATE                         ANII SIGNATURE             DATEj

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                         2R11-oos GE ENERGY, NUCLEAR Site:                LaSolle                Component ID:                               GEL-1060-AG Outage:                  L2R11                                                               TOP HEAD FLANGE System:               RPV              ASME Cat.:        B-A           ASME Item             81.40          Aug Req          SECT XI Exams          Data Sheet        Cal Sheet            Procedure              Calibration Block 1   Examination      Cert Level       Date Performed '                                                                                            Personnel 60  RL             D-007            N/A          GE-UT-300 Ver/Rev    10      CAL-IIW2-026        Jack Reisewitz         II        3i2/2007 60' RL             D-008            N/A          GE-UT-300 Ver/Rev    10   i     01-92-04         Jack Reisewitz         II        312/2007 60&deg; RL             D-009            N/A          GE-UT-300 Ver/Rev    10      CAL-11W2-033      Mario Russomanno         II        3/3/2007 60' RL             D-010            N/A     1   GE-UT-300 Ver/Rev     10         01-92-04       Mario Russomanno         1I        3/3/2007 MT              MT-001            N/A           GE-MT-100 Ver/Rev 8               N/A            Wallace Reid          II        3/2/2007 Examination Results:
During the manual ultrasonic examination of the above referenced weld, no recordable indications were detected utilizing a 600 refracted longitudinal wave search unit.
A magnetic particle surface examination was also performed from 180&deg; to 3600 with no recordable indications.
No recordable indications were detected.
80.6% Code coverage was achieved.
This examination is acceptable per the requirements of ASME Section X11995 Edition, 1996 Addenda.
Examination results were compared to data report              D-188A      from         1996    outage with      V:   No Change These examinations were performed under Work Order:                 00821549                                      .. Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:                 RWP:        N/A
                                                                              /. 2Do                     S                se:      9       mr.
Prepared By:                                  Date:     Utility Review:                                 Dote:
ANII Review:                                    Date:          Page     1 of     8

GE Energy, Nuclear                                              MAGNETIC PARTICLE EXAMINATION REPORT Reor      NubrI2I-0 Site:    LaSalle                           Unit:    2          Project:            L2RXX                               Report Number:                      2R11-005 Sheet No.:                          MT-O01 Weld No.:      GEL-1060-AG                                              Configuration:                TOP HEAD FLANGE Drawing:       GEL-1060                                                 System:                       RPV Procedure No.:          GE-MT-100                              Version / Revision                         8                 DRR:                        N/A Material:                          Surface Condition:                           Item:
CarbonSteel                          GroundSmooth                               Weld - Final Magnetizing Apparatus                                                                                         Black Light Mfg:              ParkerResearch          Yoke Calibration:          2/14/08                                                                Model             Serial Number Model:            B-300                                                                                          Blacklight             N/A                N/A Serial No.:        5502                    Yoke Spacing:              6.0'                                        Light Meter            N/A               N/A Thermometer:            251804                           Surface Temperature:                               75 &deg; F Technique                                         Examination Medium                                                               Blocklight Intensity Magnetization: AC                          Magnetic Particles:                P-y                                                                         N/A Technique:         Continuous                        Magnaflux                      8A Red                      93AO45                             Blacklight intensity.
Manufacturer:               Particle Type:                 Botch No Indication Numbe       ................... . ...........          ..........................................................                                       Results:
NIA                                                                N/A                                                                                      NRI Comments:
No recordable-indications.
Light Source: Yoke with ECT Light 12V/10W Exam Area: Examined 1800 to 360' Wallace Reid         JiA.J P,        It           3/2/200           Utility Review                                                      Dote iitial Examiner                     Level     Date GE Review                            Level    Dote                  ANti Review                                                         Date             Page         6     of  8

Wj                                                                           Reactor PressureVessel E
(D GE Energy - Nuclear                                        Coverage CalculationSheet LaSalle Unit-2, 2007 GEL-1 060-AG L2R11 CODE CROSS-SECTIONAL AREA                      TOTAL CODE COVERAGE Percent Weld Length =      180. Required Exam     Area Scanned        of Area        Weld Length   Percent Exam Volume =       35.8     Area Sq. In.        Manual          Manual            Manual     Manual 600 T-Scan (S4 UP)         A             5.2              0              0.0%               180       0.0%
60' T-Scan (S4 DN)         A             5.2             5.2            14.5%               180       3.6%
600 T-Scan (S6)          A*           30.6             29             81.0%               180      40.5%
C.'
600 P-Scan (S4 CW)          A             5.2             3.9            10.9%               180       2.7%
600 P-Scan (S4 CCW)          A             5.2             3.9            10.9%               180      2.7%
600 P-Scan (S6)          A            30.6            22.2            62.0%               180      31.0%
600 T-Scan (S4 UP) 60&deg; T-Scan (S4 DN) 600 T-Scan (S6) 600 P-Scan (S4 CW) 600 P-Scan (S4 CCW) 600 P-Scan (S6) 600 T-Scan (S4 UP) 60' T-Scan (S4 DN) 600 T-Scan (S6) 600 P-Scan (S4 CW)'
600 P-Scan (S4 CCW) 600 P-Scan (S6)
                                                                                             % Total Composite Coverage =  80.6%
Rev. 1 3/4107 Comments:
(D~
Scanning limited looking up due to the flange configuration. Examined from 1800 CW to 3600 Az. as scheduled.
04  A*- Single side access, 50% credit of the achieved Supplement 4 T-scan volume claimed.
Note - Rounding methods may affect calculated values. Weld length in degrees.

LaSalle Unit-2 Closure Head Flange 600 S4 Exam Volume   = 5.2 Sq. In.
600 S6 Exam Volume   = 30.6 Sq. In.
60' S4 P-Scan LKCW achieved = 3.9 Sq. In.
K                                              600 S4 P-Scan LKCCW achieved = 3.9 Sq. In.
N                                             600 S6 P-Scan achieved = 22.2 Sq. In.
N Ni                                            600 S4 T-Scan LKDN achieved = 5.2 Sq. In.
600 S4 T-Scan LKUP achieved = 0.0.Sq. In.
60' S6 T-Scan achieved = 29.0 Sq. In.
13-&#xfd;'
I Flange -. +-
Head Scan Iimited due to Flange configuration.
N~
Radial Plate T Norm. = 5.125" Clad T Nom. = 0.1875"

OGE                  (
Energy Nuclear                Examination SummarySheet
_______________________Report                                                          No.:    2R11-007 Site:        LaSalle Unit-2                 Component ID:       LCS-2-N16A Outage:      L2R11                          Configuration:      Nozzle to Shell System:      RPV                            ASME Cot:           B-0          ASME Item:        B3.90 Aug. Requirements:       N/A Exams          Calibration                    Calibration                        Examination                 NDE Performed:     Sheet(s):                      Block:            Procedure:       Personnel:                  Level:        Dote:
0&deg;L            NOZ                            01-92-01          GE-UT-704/705    C. Gauthier                 II            3/3/07 4505           NOZ                            01-92-01          GE-UT-704/705    C. Gauthier                 II            3/3/07 60*L           NOZ                            01-92-01          GE-UT-704/705    C. Gauthier                 II            3/3/07 70'L           NOZ                            01-92-01          GE-UT-704/705    C. Gauthier                 II            3/3/07 45 0S          IRS                            01-92-01          GE-UT-705        C. Gauthier                 II            3/4/07 6005           IRS                            01-92-01          GE-UT-705        C. Gauthier                 II            3/4/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PD! program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Port 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 V5, using 450 Shear wave, 60' RL, and 700 RL search units, supplemental 00 L-Wave scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
One acceptable indication was recorded.
Automated Composite Coverage = 70.5%
The examination results were compared with data report                D-436       from        L2R03   outage with    [   No Change These examinations were performed under Work Order:                   N/A                                            E   Change This summary and the following data sheets hove been reviewed and accepted by the following personnel:
Prepared By:                           Level Dote:                Utility Reviej By:                   Dote:
ANIl Reviewed 3v:                     Oote:
Page 1 of /C)

r-c)
Reactor Pressure Vessel C
(D GE Energy- Nuclear                                       Coverage CalculationSheet LaSalle Unit-2, 2007 LCS-2-N16A L2R11 CODE CROSS-SECTIONAL AREA                     TOTAL CODE COVERAGE Weld Length = 360.       Required Exam    Area Scanned        Percent Exam Volume = 59.1          Area Sq. In.        Auto.           of Area      Weld Length         Percent 60' T-Scan (S4 UC)        A*         8.5              8.5             14.4%             360             7.2%
450 T-Scan (S6 FV)       A*        39.2              33.5           56.7%              360            28.3%
70' T-Scan (S6 NS)       A*         11.4             5.8             9.8%              360             4.9%
IRS P-Scan (S4 UC)        A          8.5              8.5             14.4%             360             7.2%
450 P-Scan (S6 FV)       A         39.2             22.5            38.1%              360            19.0%
70' P-Scan (S6 NS)        A         11.4              4.5             7.6%              360             3.8%
600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 700 P-Scan (S6 NS) 60' T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 70' P-Scan (S6 NS)
(D
                                                                                        % Iotal Composite Coverage =       70.5%
Rev 0 9/23/M*
Comments:
0  Scanning limited due to nozzle configuration.
IRS P-Scan by modeling.
A*- Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a.
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

CD LaSalle Unit-2 0
0                     LCS-2-N 16A (HPCS) 70' Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0 T) = 8.5 Sq. In.
70' T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"
     /
70'T          45&deg;T              60'T I             I                 I CD 0
h1

C,.
CU LaSalle Unit-2 LCS-2-N 16A (HPCS) 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25" 70'P 45'P x   ----
K----
CD 0

GE Enerq Nuclear       W 'G Examination EnrgyNucearReport Summary Sheet                                  No.:  2RII-008 Site:        LaSalle Unit-2           Component ID:     LCS-2-N2A Outage:      L2R11                    Configuration:    Nozzle to Shell System:      RPV                      ASME Cat:         B-D          ASME Item:       83.90  Aug. Requirements:      N/A Exams          Calibration             Calibration                        Examination                NDE Performed:     Sheet(s):               Block:           Procedure:        Personnel:                 Level:        Date:
00L             NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II            3/7/07 450S            NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II            3/7/07 60'L           NOZ                     01-92-01         GE-UT-704/705     K. Montgomery              II            3/7/07 70 0 L          NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II            3/7/07 450 S          IRS                     01-92-01         GE-UT-705         K. Montgomery              II            3/7/07 60'S           IRS                     01-92-01         GE-UT-705         K. Montgomery              II            3/7/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel IRPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 V5, using 450 Shear wave, 60' RL, and 70' RL search units, supplemental 00 L-Wave scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
One acceptable indication was recorded.
Automated Composite Coverage = 70.5%
The examination results were compared with data report        D-459        from      L2R03     outage with    [D No Change These examinations were performed under Work Order:           N/A                                             [- Change This summary and the following data sheets have been reviewed and accepted by the following personnel:
17 Prepared By:                  Level  Date:                utility Reew By:                     Date:
ANII Reviewed By:                    Date:
Page 1 of /    0

Cn Reactor PressureVessel GE Energy- Nuclear                                              Coverage Calculation Sheet C
0                                                                      LaSalle Unit-2, 2007 LCS-2-N2A L2R11 CODE CROSS-SECTIONAL AREA                       TOTAL CODE COVERAGE Weld Length =      360.      Required Exam                          Percent Exam Volume =       59.1        Area Sq. In. Area Scanned          of Area        Weld Length      Percent 600 T-Scan (S4 UC)        A*              8.5                 8.5           14.4%               360           7.2%
450 T-Scan (S6 FV)        A*             39.2                33.5           56.7%               360         28 3%
700 T-Scan (36 NS)        A*             11.4                 5.8            9.8%               360          4.9%
IRS P-Scan (S4 UC)         A              8.5                 8.5           14.4%               360           7.2%
450 P-Scan (S6 FV)         A             392                 22.5           38.1%               360         19.0%
70 0 P-Scan (S6 NS)        A             11.4                4.5             7.6%               360           3.8%
600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)     ___________                  ________       _______             ________       _______
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 70' P-Scan (S6 NS) 60' T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 70&deg; P-Scan (S6 NS)
                                                                                              % Total Composite Coverage =       70.5%
                                                                                                                                    %  oa Ceo.e0oea2Rev5 Comments:
(0 Scanning limited due to the nozzle configuration.
IRS P-Scan by modeling.
A* - Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a..
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

I-C,,
C r\3                  LaSalle Unit-2 N) 0 0
 -.4 LCS-2-N2A 70&deg; Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
70' T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"
     /
707T          45&deg;T              60'T I             I                 I F-
               -----1 (0
CD

C/)
0                                   LaSalle Unit-2 0)
N)
LCS-2-N2A 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0 T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
    /                       70'P 45&deg;P K
k- -- - -        -----A CD

       -GE EnergyNuclear           Examination Summary Sheet Site:        LaSalle Unit-2          Component ID:     LCS-2-N2D Outage:      L2R11                   Configuration:    Nozzle to Shell System:      RPV                     ASME Cat:         B-D          ASME Item:        B3.90  Aug. Requirements:       N/A Exams          Calibration            Calibration                        Examination                 NDE Performed:     Sheetls):              Block:           Procedure:        Personnel:                  Level:         Date:
0 0L             NOZ                    01-92-01         GE-UT-704/705     C. Gauthier                 II             3/6/07 45&deg;S           NOZ                    01-92-01         GE-UT-704/705     C. Gauthier                 II             3/6/07 60 0L          NOZ                    01-92-01         GE-UT-704/705     C. Gauthier                 II             3/6/07 70 0L          NOZ                    01-92-01         GE-UT-704/705     C. Gauthier                 II             3/6/07 4505           IRS                    01-92-01         GE-UT-705         C. Gauthier                 tl             3/7/07 60&deg;S           IRS                    01-92-01         GE-UT-705         C. Gauthier                 II             3/7/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section X1, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II,Nuclear Regulatory Commission, 10 CFR Part 50 for Category 8-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 VS, using 450 Shear wave, 600 RL, and 700 RL search units, supplemental 0&deg; L-Wove scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration and proximity of the N9A nozzle.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC, No relevant indications were recorded.
Automated Composite Coverage = 70.3%
The examination results were compared with data report       D-463        from        L2R03    outage with   [    No Change These examinations were performed Linder Work Order:         N/A                                             D   Change This summary and the following data sheets have been reviewed and accepted by the following personnel:
__ __  __    __   _  _   _        t       3'0        __    ___      ___      ___ __              ____
Prepaied ,y:                 Levelt Date:                 Utiity Review By:                    Date:
ANII Reviewed 1y:                     Date:
Page I of

Ul)
Reactor Pressure Vessel GE Energy - Nuclear                                         Coverage CalculationSheet C
LaSalle Unit-2, 2007 LCS-2-N2D L2R11 CODE CROSS-SECTIONAL AREA                    TOTAL CODE COVERAGE Weld Length =     360. Required Exam                        Percent Exam Volume =      69.1      Area Sq. In.      Area Scanned     of Area       Weld Length        Percent 600  T-Scan (S4 UC)      A*            8.5                8.5         14.4%            315              6.3%
450 T-Scan (S6 FV)      A*           39.2               33.5         56.7%            360             28.3%
70' T-Scan (S6 NS)      A*           11.4                5.8         9.8%             360              4.9%
IRS  P-Scan (S4 UC)       A            8.5                8.5         14.4%            360              7.2%
450  P-Scan (S6 FV)       A           39.2               22.5         38.1%            360             19.0%
70'  P-Scan (S6 NS)       A           11.4               4.5          7.6%             360              3.8%
600 T-Scan (S4 UC)        B            8.5               6.8          11.5%              45             0.7%
450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC)                                                              '_
450 P-Scan (S6 FV) 70' P-Scan (S6 NS) 60' T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 70&deg; P-Scan (S6 NS)
                                                                                         %Total Composite Coverage =        70.3%
                                                                                                                                   . &#xfd; gj--
Comments:
Scanning limited due to the nozzle configuration and proximity of the N9A nozzle.
IRS P-Scan by modeling.
A*- Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a..
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

C/)
CD C:                               LaSalle Unit-2 LCS-2-N2D 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
    /                   70TP 45&deg;P I    I K----
F-
                  --- 9

C, C
LaSalle Unit-2 0
0 LCS-2-N2D 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25" I                                             60'T 70'T          45'T I
            /
I

r-0)
C 0.
LaSalle Unit-2 0*
LCS-2-N2D 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 6.8 Sq. In.
Limited area due to N9.
17.25"
    /                         45&deg;T      60&deg;T 70'T I         I V-

a      GE EnergyNuclear            Examination Summary Sheet                                          Report No.:   2R11-010 Site:        LaSalle Unit-2           Component ID:    LCS-2-N2E Outage:      L2R11                    Configuration:   Nozzle to Shell System:      RPV                      ASME Cat:        B-D           ASME Item:         B3.90 Aug. Requirements:        N/A Exams          Calibration             Calibration                        Examination                 NDE Performed:     Sheetls):               Block:          Procedure:         Personnel:                  Level:        Date:
0&deg;L            NOZ                     01-92-01        GE-UT-704/705      K. Montgomery               11            3/7/07 45&deg;S           NOZ                     01-92-01        GE-UT-704/705      K. Montgomery               11            3/7/07 60 0 L         NOZ                     01-92-01        GE-UT-704/705      K. Montgomery               11            3/7/07 70 0 L         NOZ                     01-92-01        GE-UT-704/705      K. Montgomery               11            3/7/07 450S           IRS                     01-92-01        GE-UT-705          K. Montgomery               11            3/7/07 60'S           IRS                     01-92-01        GE-UT-705          K. Montgomery               11            3/7/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel IRPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 V5, using 450 Shear wave, 600 RL, and 700 RL search units, supplemental 00 L-Wave scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
No relevant indications were recorded.
Automated Composite Coverage = 70.5%
The examination results were compared with data report        D-463        from         L2R03  outage with    [    No Change These examinations were performed under Work Order:           N/A                                             [] Change This summary and the following data sheets have been reviewed and accepted by the following personnel:
Prepared By:                 evel:  Dote:                 Utility Review By:                   Cote:
ANII Reviewed By:                       qrp1te Page 1 of at3

I-.
Ul)
ReactorPressure Vessel (D
C GE Energy - Nuclear                                      Coverage Calculation Sheet C) 0 0-                                                                 LaSalle Unit-2, 2007 LCS-2-N2E L2R1 1 CODE CROSS-SECTIONAL AREA                    TOTAL CODE COVERAGE Weld Length =      360. Required Exam                        Percent Exam Volume =       59.1     Area Sq. In. Area Scanned         of Area      Weld Length        Percent 60' T-Scan (S4 UC)       A*          8.5              8.5             14.4%            315             6.3%
450 T-Scan (S6 FV)       A*          39.2            33.5             56.7%            360            28.3%
709 T-Scan (S6 NS)       A*          11.4             5.8              9.8%            360             4.9%
IRS P-Scan (S4 UC)       A           8.5              8.5             14.4%            360             7.2%
450 P-Scan (S6 FV)       A           39.2            22.5             38.1%            360            19.0%
700 P-Scan (S6 NS)        A          11.4             4.5              7.6%            360             3.8%
60' T-Scan (S4 UC) 450 T-Scan (S6 FV) 70' T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 700 P-Scan (S6 NS),
60' T-Scan (S4 UC) 45' T-Scan (S6 FV) 70' T-Scan (S6 NS)
IRS P-Scan (S4 UC) 45' P-Scan (S6 FV) 70' P-Scan (S6 NS)
                                                                                          % Total Composite Coverage =      69.6%
Re. 0 9/23/05 Comments:
Scanning limited due to the nozzle configuration.
IRS P-Scan by modeling.
A* - Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a..
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

C:
2.
C~
LaSalle Unit-2 4                   LCS-2-N2E 70' Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60'T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"
   //
70'T          45&deg;T              60'T I             I
             - --- A

C/)
CD LaSalle Unit-2 N)
C0 0
4.
LCS-2-N2E 700 Exam Volume = 11A4 Sq. In.
450 Exam Volume = 39,2 Sq. In.
Inner 15%T Exam Volume (IRS & 600T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25"
      /
70'P 45*P I    I K----
1~
K----              ---- A L       (&#xa3;     I   I I

GE Energy Nuclear            Examination Summary Sheet                                         ReportNo.:   2R11-011 Site:        LaSalle Unit-2           Component ID:     LCS-2-N5A Outage:      L2R11                    Configuration:    Nozzle to Shell System:     RPV                       ASME Cat:         B-D          ASME Item:        B3.90 Aug. Requirements:      N/A Exams           Calibration            Calibration                        Examination                NDE Performed:      Sheet(s):              Block:          Procedure:         Personnel:                 Level:        Date:
0&deg;L             NOZ                    01-92-01        GE-UT-704/705 K. Montgomery                   11            3/4/07 45&deg;S            NOZ                    01-92-01        GE-UT-704/705 K. Montgomery                   11            3/4/07 60'L            NOZ                    01-92-01        GE-UT-704/705 K. Montgomery                   11            3/4/07 700L            NOZ                    01-92-01        GE-UT-704/705 K. Montgomery                   11            3/4/07 450S            IRS                    01-92-01        GE-UT-705          K. Montgomery              11            3/4/07 60'S            IRS                    01-92-01        GE-UT-705          K. Montgomery              11            3/4/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 V5, using 450 Shear wave, 60&deg; RL, and 70' RL search units, supplemental 00 L-Wave scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
No relevant indications were recorded.
Automated Composite Coverage = 70.5%
The examination results were compared with data report        D-434        from        L2R03   outage with    [ No Change These examinations were performed under Work Order:           N/A                                             [l Change This summary and the following data sheets have been reviewed and accepted by the following personnel:
Pvepaced By:                 Level: Date                 Utility Review gy:                   Dote:
ANII Reviewed Ey:                    Date:
Page "I of

U/)
Reactor Pressure Vessel C
GE Energy - Nuclear                                      Coverage CalculationSheet
:3 C) 0 LaSalle Unit-2, 2007 LCS-2-N5A L2R11 CODE CROSS-SECTIONAL AREA                   TOTAL CODE COVERAGE Weld Length =     360. Required Exam   Area Scanned       Percent Exam Volume =      59.1      Area Sq. In.      Manual           of Area      Weld Length         Percent 600 T-Scan (S4 UC)       A*            8.5             8.5            14.4%            360              7.2%
450 T-Scan (S6 FV)       A*           39.2            33.5            56.7%            360             28.3%
700 T-Scan (S6 NS)       A*           11.4             5.8             9.8%            360              4.9%
IRS P-Scan (S4 UC)        A            8.5             8.5            14.4%            360              7.2%
450 P-Scan (S6 FV)        A           39.2            22.5            38.1%            360             19.0%
700 P-Scan (S6 NS)        A           11.4             4.5             7.6%            360              3.8%
600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 70' P-Scan (S6 NS) 600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 700 P-Scan (36 NS)
CD                                                                                       % Total Composite Coverage =       70.5%
Rev. 0 9/23105 Comments:
0 Scanning limited due to the nozzle configuration.
IRS P-Scan by modeling.
A*- Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed law. 10CFR50.55a..
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

r--
C,,)
C LaSalle Unit-2 N) 4                  LCS-2-N5A 70' Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0 T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25"
     /
70'T          45&deg;T              60'T I
              ---- 1 CD 0

LaSalle Unit-2 LCS-2-N5A 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 60 0 T) = 8.5 Sq. In.
\I                 700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25" 70&deg;P 45 P

(OGE           Enery Nuclear           Examination Summary Sheet                                         Report No.:    2R11-012 Site:        LaSalle Unit-2           Component ID:     LCS-2-N6B Outage:      L2R11                    Configuration:    Nozzle to Shell System:      RPV                      ASME Cat:         B-D          ASME Item:        B3.90 Aug. Requirements:        N/A Exams          Calibration             Calibration                        Examination                NDE Performed:     Sheetls):               Block:           Procedure:        Personnel:                 Level:          Date:
0&deg;L             NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II              3/5/07 450S            NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II              3/5/07 60 0 L          NOZ                    01-92-01         GE-UT-704/705     K. Montgomery              II              3/5/07 70 0 L         NOZ                     01-92-01         GE-UT-704/705     K. Montgomery              II              3/5/07 450S           IRS                     01-92-01        GE-UT-705          C. Gauthier                II              3/5/07 60&deg;S           IRS                     01-92-01        GE-UT-705          C. Gauthier                II              3/5/07 Comments:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section Xl, 1989 Edition no Addenda, also Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal.
Register, Part II, Nuclear Regulatory Commission, 10 CFR Part 50 for Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Automated transverse and parallel scans were performed in accordance with procedures GE-UT-704 V8 and GE-UT-705 V5, using 450 Shear wave, 600 RL, and 700 RL search units, supplemental 00 L-Wave scans were also performed. Nozzle Inner 15%T circ scans were performed in accordance with Model validated search unit angles.
Automated scanning was performed from the vessel OD surface. and was restricted due to the nozzle configuration.
The GERIS 2000 OD automated UT system 0 reference is located at 900 CW of nozzle TDC.
Note-The N6B is located at 3150 Az.
No relevant indications were recorded.
Automated Composite Coverage = 70.5%
The examination results were compared with data report        D-453         from       L2R03   outage with    [] No Change These examinations were performed under Work Order:           N/A                                             E]Change This summary and the following data sheets have been reviewed and accepted by the following personnel:
Piepared By:                  Level: Dote:                Utility Revcew By:                   Dote:
i',Nil Reviewed By:                   Dote:
Poge 1 of      <7

U-Reactor PressureVessel C:
GE Energy- Nuclear                                         Coverage CalculationSheet LaSalle Unit-2, 2007 LCS-2-N6B L2R11 CODE CROSS-SECTIONAL AREA                  TOTAL CODE COVERAGE Weld Length = 360.         Required Exam                      Percent Exam Volume = 59.1            Area Sq. In. Area Scanned      of Area      Weld Length          Percent 60' T-Scan (34 UC)       A*            8.5              8.5          14.4%             360              7.2%
450 T-Scan (S6 FV)      A*           39.2             33.5          56.7%             360             28.3%
70' T-Scan (S6 NS)       A*           11.4              5.8           9.8%             360             4.9%
IRS P-Scan (S4 UC)        A            8.5              8.5          14.4%             360              7.2%
450 P-Scan (S6 FV)       A           39.2             22.5          38.1%             360             19.0%
700 P-Scan (S6 NS)       A           11.4              4.5           7.6%             360              3.8%
600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 700 P-Scan (S6 NS) 600 T-Scan (S4 UC) 450 T-Scan (S6 FV) 700 T-Scan (S6 NS)
IRS P-Scan (S4 UC) 450 P-Scan (S6 FV) 700 P-Scan (S6 NS)
(D                                                                                      %Total Composite Coverage =        70.5%
fl Comments:
0 Scanning limited due to the nozzle configuration.
IRS P-Scan by modeling.
A*- Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a.
Note - Rounding methods may affect calculated values. UC-Underclad, FV-Full volume, NS-Near Surface. Weld length in degrees.

Cf)
CD D-.
LaSalle Unit-2 0                         LCS-2-N6B 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
700 T-Scan achieved = 5.8 Sq. In.
450 T-Scan achieved = 33.5 Sq. In.
600 T-Scan achieved = 8.5 Sq. In.
17.25" I                        70&deg;T          457T              60'T I                  I F----
                 - - -- A C

C/)
C LaSalle Unit-2 LCS-2-N6B 700 Exam Volume = 11.4 Sq. In.
450 Exam Volume = 39.2 Sq. In.
Inner 15%T Exam Volume (IRS & 607T) = 8.5 Sq. In.
700 P-Scan achieved = 4.5 Sq. In.
450 P-Scan achieved = 22.5 Sq. In.
IRS P-Scan achieved = 8.5 Sq. In. (By model) 17.25" I
70-p 45-P K----
CD 0
cft*

Site:               LaSalle                   Component ID:                              LCS-2-N9A Ouitoge:                L2R11                                                                       N-S%
System:               RPV               ASME Cot.:        B-D          ASME Item            83.90           Aug Req          SECT XI Exams            Data Sheet       Cal Sheet             Procedure            Calibration Block     Examination       Cert Level       Date Performed                                                                                            Personnel 60&deg; Shear           D-076              N/A          GE-UT-311 Ver/Rev 15          01-92-01         Phillip Hopkins         II     1 3/6/2007 600 RL     i      D-074              N/A          GE-UT-300 Ver/Rev 10          01-92-01          Wallace Reid           Ii        3/6/2007 600 RL            D-075              N/A     i    GE-UT-300 Ver/Rev 10       CAL-IIW2-017         Wallace Reid           II        3/6/2007 Examination Results:
Ultrasonic examination results were acceptableto the requirements of ASME B&PV Code Section X1,1989 Edition no. Addenda, and Section X1, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II. Nuclear Regulatory Commission, 10 CFR Part 50 of Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 V10, using 600 RL search units. Manual parallel scans of the inner 15%T volume were performed in accordance with procedure GE-UT-311 V15 using model validated shear wave search units.
Manual scanning was restricted due to the nozzle configuration.
The manual exams recorded no indications.
(  Manual UT composite coverage = 82.9%
Examination results were compared to data report               95-472     from     3/31/1995 outage with        V-1 No Change These examinations were performed under Work Order:.                                                                    Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:
C&#xfd;            ' 6eCAO4&#xfd;'                                                                                                 Dose:      164    mr.
Prepared By:                                    Date:    Utility Review:                               Date:
ANII Review.                                 Date:             Page    I   of  7

rI-9i (D
C/
Reactor Pressure Vessel GE Energy - Nuclear                                     Coverage CalculationSheet 0
C                                                                   LaSalle Unit-2, 2007 LCS-2-N9A L2R11 CODE CROSS-SECTIONAL AREA                     TOTAL CODE COVERAGE Weld Length =     360. Required Exam                         Percent Exam Volume =      59.6     Area Sq. In. Area Scanned         of Area      Weld Length      Percent 600 T-Scan (S4)        A            8.5             8.5             14.3%             360         7.1%
600 T-Scan (S6)        A           51.1            38.1            63.9%              360         32.0%
IRS P-Scan (S4)        A*           8.5             8.5             14.3%             360         7.1%
60' P-Scan (S6)        A           51.1            43.7            73.3%              360        36.7%
600 T-Scan (S4) 600 T-Scan (S6)
IRS P-Scan (S4) 60' P-Scan (S6) 600 T-Scan (S4) 600 T-Scan (S6)
IRS P-Scan (S4) 60' P-Scan (S6) 600 T-Scan (S4) 60' T-Scan (S6)
IRS P-Scan (S4) 600 P-Scan (S6)
                                                                                          % Total Composite Coverage =   82.9%
0D 1, 1 J.-(**.*. Re,, 0 i91Vfl0v Rev 0 9/23/05 01  Comments:
A* - Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a.
Note - Rounding methods may affect calculated values. Weld length in degrees.

_                 LaSalle Unit-2
=LCS-2-N9A 0'o               60' S4 Exam Volume = 8.5 Sq. In.
4               600 S6 Exam Volume = 51.1 Sq. In.
600 S4 Inner 15%T IRS-Scan achie ved = 8.5 Sq. In.
600 S6 P-Scan achieved = 38.1 Sq. In.
600 S4 T-Scan achieved = 8.5 Sq. 1n.
600 S6 T-Scan achieved = 43.7 Sq. In.
           /0.0",             9.2" 15.6" 607T I
0T CD

Report No.:
EXAMINATION 

==SUMMARY==
SHEET                                         2R11-014 GE ENERGY, NUCLEAR
(        Site:                 LaSalle                  Component ID:                                LCS-2-N9B Outage:                    L2R11                                                                      N-SH System:                 RPV            ASME Cat.:           B-D          ASME Item             B3. 90          Aug Req          SECT XI Exams              Data Sheet      Cal Sheet              Procedure             Calibration Black     Examination        Cert Level      Date Performed                                      I                                                        Personnel       i 60 "Ser                                                                         01-92-01          WlaeRidU                         372d "0 She               D-083            N/A            GE-UT-311 Ver/Rev 15    -G "31                   Wallace Reid         '30/2007 600 RL              D-077            N/A            GE-UT-300 Ver/Rev 10         CAL-11W2-017        Wallace Reid         iI       i 3/7/2007 60&deg; RL      i       D-078       I    N/A-    i      GE-UT-300 Ver/Rev i0           01-92-01      I   Wallace Reid            II       3/7/2007 Examination Results:
Ultrasonic examination results were acceptable to the requirements of ASME B&PV Code Section XI, 1989 Edition no. Addenda, and Section XI, 1995 Edition with the 1996 Addenda as modified by the PDI program description and the Federal Register, Part II.Nuclear Regulatory Commission, 10 CFR Part 50 of Category B-D Reactor Pressure Vessel (RPV) Assembly Welds.
Manual transverse and parallel scans were performed from the vessel OD surface in accordance with procedure GE-UT-300 VI1, using 60&deg; RL search units. Manual parallel scans of the inner 15%T volume were performed in accordance with procedure GE-UT-311 V15 using model validated shear wave search units. Reference nozzle inner radius and bore inspection requirement sheet included in report 2R11-025.
Manual scanning was restricted due to the nozzle configuration.
The manual exams recorded no indications.
Manual UT composite coverage = 82.9%
Examination results were compared to data report                 95-474      from      3/31/1995 outage with      '      No Change These examinations were performed under Work Order:                                                                        Change This Summary and the following data sheets have been reviewed and accepted by the following personnel:
RW' 7     _.J/*'I       */                          6/,' "*                     /)y/[L.(~                ?..L .. ;.7        Dose:      145     mr.
Prepared By:                                     Date:     Utility Review.                               Date:
ANII Review                                   Date:             Page    1   of    6

C/)
Reactor PressureVessel GE Energy- Nuclear                                      Coverage CalculationSheet C:)
LaSalle Unit-2, 2007 LCS-2-N9B
               "                                                            L2R11 CODE CROSS-SECTIONAL AREA                     TOTAL CODE COVERAGE Weld Length =      360. Required Exam                        Percent Exam Volume =       59.6    Area Sq. In. Area Scanned         of Area      Weld Length    Percent 600 T-Scan (S4)         A          8.5              8.5             14.3%             360        7.1%
60&deg; T-Scan (S6)         A         51.1             38.1            63.9%              360       32.0%
IRS P-Scan (S4)         A*         8.5              8.5             14.3%             360        7.1%
60' P-Scan (S6)         A         51.1             43.7            73.3%              360       36.7%
600 T-Scan (S4) 600 T-Scan (S6).
IRS P-Scan (S4) 60' P-Scan (S6) 60' T-Scan (S4) 600 T-Scan (S6)
IRS P-Scan  (S4) 60' P-Scan (S6) 60' T-Scan (S4)      _
600 T-Scan (S6)
IRS P-Scan (S4) 600 P-Scan (S6)
                                                                                           % Total Composite Coverage =  82.9%
                                                                                                                         -j A-t,&*
* Rev. o 9/23105 (0   Comments:
A* - Single side access, 100% credit of the achieved Supplement 4 T-scan volume claimed iaw. 10CFR50.55a.
Note - Rounding methods may affect calculated values. Weld length in degrees.

i--LaSalle                                           Unit-2 CLCS-2-N9B C),)                              600 S4 Exam Volume = 8.5 Sq. In.
  -,4                             600 S6 Exam Volume = 51.1 Sq. In.
600 S4 Inner 15%T IRS-Scan achie\ ,ed = 8.5 Sq. In.
600 S6 P-Scan achieved = 38.1 Sq. In.
           *     *,60&deg;                S4 T-Scan achieved = 8.5 Sq. Ir 600 S6 T-Scan achieved = 43.7 Sq. In.
                       *0.0"9.2"1 15.6" 60&deg;P                     60'T I
CD 0>      r o,
C'\}}