View source for RA-19-0195, Submittal of AP1000 Combined License Application Departure Report Update and 10 CFR 50.46 Annual Update

{{Adams
| number = ML19100A037
| issue date = 04/10/2019
| title = Submittal of AP1000 Combined License Application Departure Report Update and 10 CFR 50.46 Annual Update
| author name = Nolan M
| author affiliation = Duke Energy Progress, Inc
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRO
| docket = 05200022, 05200023
| license number = 
| contact person = 
| case reference number = RA-19-0195
| document type = Annual Operating Report, Letter type:RA
| page count = 21
}}

=Text=
{{#Wiki_filter:1.. DUKE
 * ~ ENERGY                                                                      M. Christopher Nolan 526 South Church Street Charlotte, NC 28202 Mailing Address:
Mail Code EC07H /P.O. Box 1006 Charlotte, NC 28201-1006 704-382-7426 Serial: RA-19-0195 April 10, 2019                                                         10 CFR 52, Appendix D, X.B 10 CFR 50.46 U. S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555-0001 SHEARON HARRIS NUCLEAR POWER PLANT, UNITS 2 AND 3 DOCKET NOS. 52-022 AND 52-023

==SUBJECT:==
AP1000 Combined License Application Departure Report Update and 10 CFR 50.46 Annual Update Duke Energy Progress, Inc. (DEP) submitted an application, dated February 18, 2008, for a combined license for two AP1000 advanced pressurized water reactors to be located at the Shearon Harris Nuclear Power Plant Site. Part 7 of the application is entitled Departures and Exemption Requests. This letter provides an update to the report describing plant-specific departures from the AP1000 Design Control Document (i.e. Departures Report) as required by 10 CFR 52, Appendix D, paragraphs X.B.1 and X.B.3.b.
There have been no new departures or changes to the departures described in the Shearon Harris Nuclear Power Plant (HAR), Units 2 and 3, COLA Part 7, Departures and Exemption Requests for the period of November 1, 2018 to March 31, 2019.
In addition, this letter provides a required report in accordance with 10 CFR 50.46, Acceptance Criteria for Emergency Core Cooling Systems for Light-Water Nuclear Power Reactors, for HAR.
A design certification holder is required to report to the NRC in accordance with 10 CFR 50.46(a)(3). This same regulation required a similar report from any combined license (COL) holder and COL applicant. The DEP COL application for HAR, Units 2 and 3, incorporates by reference the AP1000 design certification document and thus, also utilize the peak cladding temperature calculations performed by Westinghouse Electric Company (WEC). As such, the WEC report, provided in the Enclosure, is applicable to HAR Units 2 and 3.
This submittal contains no regulatory commitments.

U.S. Nuclear Regulatory Commission Page 2 Please address any comments or questions regarding this matter to Art Zaremba, Manager -
Fleet Licensing at (980) 373-2062.
Sincerely, M. Christopher Nolan Vice President, Nuclear Regulatory Affairs

==Enclosure:==

Letter from Zachary S. Harper, Westinghouse Electric Company (WEC), to the U.S.
Nuclear Regulatory Commission, 10 CFR 50.46 Annual Report for the AP1000 Plant Design, Letter No. DPC_NRC_000146, dated March 26, 2019.
cc:   C. Haney, U.S. NRC Region II Administrator B. Hughes, U.S. NRC Project Manager

U.S. Nuclear Regulatory Commission RA-19-0195 Enclosure Letter from Zachary S. Harper, Westinghouse Electric Company to the U.S. Nuclear Regulatory Commission 10 CFR 50.46 Annual Report for the AP1000 Plant Design Letter No. DCP_NRC_000146, dated March 26, 2019

DCP_NRC_000146                             Westinghouse Non-Proprietary Class 3                           Page 1 of 18
@Westinghouse                                                                           Westinghouse Electric Company 1000 Westinghouse Drive Cranberry Township, Pennsylvania 16066 USA U.S. Nuclear Regulatory Commission                                Direct tel: 412-374-5093 Document Control Desk                                             Direct fax: 724-940-8505 11555 Rockville Pike                                                 e-mail: harperzs@.westinghouse.com Rockville, MD 20852 Your Ref: Docket No. 52-006 Our Ref: DCP_NRC_000146 March 26, 2019

==Subject:==
10 CFR 50.46 Annual Report for the APlO00 Plant Design Pursuant to 10 CPR 50.46, "Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors", Westinghouse Electric Company, LLC is submitting this report to document emergency core cooling system (ECCS) evaluation model changes or errors for the 2018 Model Year (i.e., 01/01/2018 - 12/31/2018) that affect the peak cladding temperature (PCT) calculations for the APl000 plant design.
As described below, three AP1000 analyses of record (AORs) are reported:
API000 Design Certification AOR:
On December 301\ 2011, the U.S. Nuclear Regulatory Commission certified an amendment to the Design Certification Rule for the APl 000 plant. As such, APl 000 Design Control Document (DCD) Revision 19 documents the AOR for the APl 000 Design Certification. The limiting transient for the APl 000 Design Certification is the Best Estimate Large Break Loss-of-Coolant Accident (LBLOCA). Westinghouse last provided an annual reporting letter to the NRC in March, 2018 (DCP_NRC_003328) which presented an estimated PCT of2010&deg;P for the LBLOCA evaluation. There are no new ECCS model changes that impact PCT for the 2018 model year. The estimated PCT for LBLOCA remains at 2010&deg;P and does not exceed the 10 CFR 50.46 (b)(l) acceptance criterion of2200&deg;F.
The summary of the PCT margin allocations and their bases for the AP 1000 Design Certification AOR are provided in the Attachment 1.
APl000 V.C. Summer Units 2 & 3 AOR:
In addition to the AOR for the APl 000 Design Certification, the NRC has approved the APl 000 Core Reference Report (WCAP-17524-P-A), a generic topical which includes an ECCS "reanalysis" in the context of 10 CPR 50.46. The AOR contained in the Core Reference Report (CRR) has also been approved for incorporation into the V.C. Summer Units 2 & 3 licenses via license amendment request (LAR). There are no new ECCS model changes that impact PCT for the 2018 model year. The estimated PCT for LBLOCA remains at 1970&deg;P and does not exceed the 10 CPR 50.46 (b)(l) acceptance criterion of2200&deg;P.
AP I 000 is a trademark or registered trademark of Westinghouse Electric Company LLC, its affiliates and/or its subsidiaries in the United States ofAmerica and may be registered in other countries throughout the world. All rights reserved.
Unauthorized use is strictly prohibited. Other names may be trademarks of their respective owners
                                         &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146 Westinghouse Non-Proprietary Class 3 Page 2 of 18 The summary of the PCT margin allocations and their bases for the API000 V.C. Summer Units 2 & 3 AOR are provided in the Attachment 2.
APlO00 Vogtle Units 3 & 4 AOR:
In addition to the AOR for the API 000 Design Certification, the NRC has approved the APl 000 Core Reference Report (WCAP-17524-P-A), a generic topical which includes an ECCS "reanalysis" in the context of 10 CFR 50.46. The AOR contained in the Core Reference Report (CRR) has also been approved for incorporation into the Vogtle Units 3 & 4 licenses via NRC License Amendment 52. Additionally, changes as part of the containment pressure analysis included in LAR-17-043 have been approved for incorporation into the Vogtle Units 3&4 licenses via NRC License Amendments 147 (Unit 3) and 146 (Unit 4). As such, the estimated PCT for LBLOCA is 2024&deg;F and does not exceed the 10 CFR 50.46 (b)(l) acceptance criterion of2200&deg;F.
The summary of the PCT margin allocations and their bases for the APlO00 Vogtle Units 3 & 4 AOR are provided in the Attachment 3.
By copy of this letter, COL Holders and COL Applicants are hereby notified of any changes or errors in the API000 standard plant design PCT calculations as required by 10 CFR 50.46(a)(3)(iii). This letter contains site-specific evaluations for V.C. Summer Units 2 & 3 and Vogtle Units 3 & 4.
Questions or requests for additional information related to content and preparation of this information should be directed to Westinghouse. Please send copies of such questions or requests to the respective COL Holders and COL Applicants referencing the amended APl000 Design Certification Rule for the APlO00 nuclear power plant. A representative for each COL Holder and COL Applicant is included on the cc: list of this letter.
Very truly yours, Zachary S. Harper Manager, APlO00 Licensing IAttachments
: 1. 10 CFR 50.46 Annual Report for the APlO00 Design Certification AOR, 2018 Model Year
: 2. 10 CFR 50.46 Annual Report for the APl000 V.C. Summer Units 2 & 3 AOR, 2018 Model Year
: 3. 10 CFR 50.46 Annual Report for the APl000 Vogtle Units 3 & 4 AOR, 2018 Model Year Cc:
J. Dixon-Herrity    - U.S. NRC         A. Zaremba       - Duke/Progress     A. Schoedel     - Westinghouse A. Bradford          -U.S. NRC         S. Franzone      -FP&L               M. Yuan         - Westinghouse D. Habib             -U.S. NRC         R. Orthen        -FP&L               D. McDevitt     - Westinghouse J. Bouknight          -SCANA            L. Oriani        - Westinghouse      M. Sheaffer     - Westinghouse A. Aughtman          -SNC              D. Weaver        - Westinghouse      M. Barca        - Westinghouse A. Chamberlain      - SNC              J. Boyle         - Westinghouse      M. Patterson    - Westinghouse E. Grant             -SNC               J. Eisenhauer    - Westinghouse Y. Arafeh            -SNC              M. Corletti      - W estimmouse
                                 &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                   Westinghouse Non-Proprietary Class 3                 Page 3 of 18 Attachment 1 10 CFR 50.46 Annual Report for the AP1000 Design Certification AOR, 2018 Model Year
                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                         Westinghouse Non-Proprietary Class 3                      Page 4 of 18 UO2 FUEL PELLET HEAT CAPACITY

===Background===
A typographical error was discovered in the implementation of the UO2 fuel pellet heat capacity as described by Equation C-4 of WCAP-8301 [1] for fuel rod heat-up calculations within the Appendix K Large Break and Small Break LOCA evaluation models. The erroneous formulation results in an over-prediction of heat capacity that increases with fuel temperature. The corrected formulation results in a maximum decrease in heat capacity on the order of approximately 1.2% for existing analyses of record.
This represents a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 [2].
Affected Evaluation Model(s) 1985 Westinghouse Advanced Plant Small Break LOCA Evaluation Model with NOTRUMP.
Estimated Effect The small over-prediction in UO2 fuel pellet heat capacity has been evaluated to have a negligible effect on existing large and small break LOCA analysis results due to the small magnitude of the change, leading to an estimated PCT impact of 0&deg;F.
References
: 1. WCAP-8301, LOCTA-IV Program: Loss-of-Coolant Transient Analysis, June 1974.
: 2. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
                                    &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                           Westinghouse Non-Proprietary Class 3                         Page 5 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                     AP1000 Utility Name:                   Westinghouse Nuclear Power Plants EM:                             ASTRUM (2004)
AOR

== Description:==
Best Estimate Large Break Summary Sheet Status: DCD AP1000 AP1K_LOCA-50.46_AP1K_DCD_ASTRUM - 1.1 V.V PCT (&deg;F)            Reference #      Note #
ANALYSIS-OF-RECORD                              1837                  1 Delta PCT                                              Reporting ASSESSMENTS*                                   (&deg;F)             Reference #      Note #            Year**
: 1. Evaluation of Pellet Thermal                                                                    2012 Conductivity Degradation and                139                  2 Peaking Factor Burndown
: 2. Revised Heat Transfer                                                                           2013 11                   3 Multiplier Distributions
: 3. Error in Burst Strain Application           23                   4                              2013 AOR + ASSESSMENTS                           PCT =       2010.0 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 APP-GW-GL-700, Revision 19, AP1000 Design Control Document, June 2011.
2    LTR-LIS-12-288, Information Regarding the Evaluation of Fuel Pellet Thermal Conductivity Degradation and Peaking Factor Burndown Including Analysis Input Changes for AP1000 Large Break LOCA Analysis, June 2012.
3    LTR-LIS-13-357, AP1000 Plant 10 CFR 50.46 Report for Revised Heat Transfer Multiplier Distributions, July 2013.
4    LTR-LIS-14-41, AP1000 Plant 10 CFR 50.46 Report for the HOTSPOT Burst Strain Error Correction, January 2014.
NOTES:
(a) None
                                      &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                          Westinghouse Non-Proprietary Class 3                          Page 6 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                    AP1000 Utility Name:                  Westinghouse Nuclear Power Plants EM:                            NOTRUMP-AP AOR

== Description:==
Appendix K Small Break Summary Sheet Status: DCD AP1000 AP1K_LOCA-50.46_AP1K_DCD_Appendix_K_SBLOCA - 1.1 V.V PCT (&deg;F)           Reference #       Note #
ANALYSIS-OF-RECORD                             1370                  1              (a)
Delta PCT                                              Reporting ASSESSMENTS*                                   (&deg;F)            Reference #       Note #            Year**
: 1. Adiabatic Heat-up Calculation              264                  2              (a)              2010 AOR + ASSESSMENTS                           PCT =      1634.0 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 APP-GW-GL-700, Revision 19, AP1000 Design Control Document, June 2011.
2   LTR-LIS-10-373, 10 CFR 50.46 Report for the Evaluation of AP1000 SBLOCA 10-inch Transient Adiabatic Heat-up Calculation, June 2010.
NOTES:
(a) This is an adiabatic heat-up calculated PCT.
                                     &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                   Westinghouse Non-Proprietary Class 3               Page 7 of 18 Attachment 2 10 CFR 50.46 Annual Report for the AP1000 V.C. Summer Units 2 & 3 AOR, 2018 Model Year
                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                         Westinghouse Non-Proprietary Class 3                      Page 8 of 18 UO2 FUEL PELLET HEAT CAPACITY

===Background===
A typographical error was discovered in the implementation of the UO2 fuel pellet heat capacity as described by Equation C-4 of WCAP-8301 [1] for fuel rod heat-up calculations within the Appendix K Large Break and Small Break LOCA evaluation models. The erroneous formulation results in an over-prediction of heat capacity that increases with fuel temperature. The corrected formulation results in a maximum decrease in heat capacity on the order of approximately 1.2% for existing analyses of record.
This represents a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 [2].
Affected Evaluation Model(s) 1985 Westinghouse Advanced Plant Small Break LOCA Evaluation Model with NOTRUMP.
Estimated Effect The small over-prediction in UO2 fuel pellet heat capacity has been evaluated to have a negligible effect on existing large and small break LOCA analysis results due to the small magnitude of the change, leading to an estimated PCT impact of 0&deg;F.
References
: 1. WCAP-8301, LOCTA-IV Program: Loss-of-Coolant Transient Analysis, June 1974.
: 2. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
                                    &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                            Westinghouse Non-Proprietary Class 3                        Page 9 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                     V. C. Summer Unit 2 and Unit 3 Utility Name:                   South Carolina Electric & Gas EM:                             ASTRUM (2004)
AOR

== Description:==
Best Estimate Large Break Summary Sheet Status: Current V. C. Summer Unit 2 VS2_LOCA-50.46_VS2_Base_ASTRUM - 1.1 V.V PCT (&deg;F)           Reference #      Note #
ANALYSIS-OF-RECORD                               1936                  1            (a)
Delta PCT                                             Reporting ASSESSMENTS*                                    (&deg;F)            Reference #      Note #            Year**
: 1. Revised Heat Transfer                                                                          2013 11                   2 Multiplier Distributions
: 2. Error in Burst Strain Application           23                   3                             2013 AOR + ASSESSMENTS                            PCT =      1970.0 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
2    LTR-LIS-13-357, AP1000 Plant 10 CFR 50.46 Report for Revised Heat Transfer Multiplier Distributions, July 2013.
3    LTR-LIS-14-41, AP1000 Plant 10 CFR 50.46 Report for the HOTSPOT Burst Strain Error Correction, January 2014.
NOTES:
(a) Value contains 2&deg;F bias for PCT sensitivity to PRHR isolation, per Reference 1 response to CRR-008, Table 2 and Table 15.6.5-8.
                                       &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                            Westinghouse Non-Proprietary Class 3                       Page 10 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                    V. C. Summer Unit 2 and Unit 3 Utility Name:                  South Carolina Electric & Gas EM:                            NOTRUMP-AP AOR

== Description:==
Appendix K Small Break Summary Sheet Status: Current V. C. Summer Unit 2 VS2_LOCA-50.46_VS2_Base_Appendix_K_SBLOCA - 1.1 V.V PCT (&deg;F)           Reference #      Note #
ANALYSIS-OF-RECORD                              663.5                  1 Delta PCT                                             Reporting ASSESSMENTS*                                    (&deg;F)            Reference #      Note #            Year**
: 1. NOTRUMP Bubble Rise/Drift                                                                      2014 32                   2 Flux Model Inconsistencies
: 2. LAR-114 Evaluation                          13                 3,4,5          (a)              2017 AOR + ASSESSMENTS                            PCT =       708.5 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
2    LTR-LIS-15-5, Updates to the AP1000 Plant SBLOCA 10 CFR 50.46 PCT Rackups, January 2015.
3    LTR-LIS-16-144, Update to the AP1000 Plant SBLOCA 10 CFR 50.46 PCT Rackups for LAR-114, January 2017.
4    LTR-LIS-18-53, AP1000 Plant 10 CFR 50.46 Annual Notification and Reporting for 2017, March 2018.
5    NND-16-0336 (ML16246A214), Automatic Depressurization System (ADS) Stage 2, 3 & 4 Valve Flow Area Changes and Clarifications, September 2016. Approved by NRC March 17, 2017 as Amendment 64 (ML17039B008/ML17039B058).
NOTES:
(a) The LAR-114 evaluation assesses the impact of reduced automatic depressurization system (ADS) Stage 2, 3, and 4 flow areas described in design change proposals (DCPs) 5051 and 5054.
                                      &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                   Westinghouse Non-Proprietary Class 3               Page 11 of 18 Attachment 3 10 CFR 50.46 Annual Report for the AP1000 Vogtle Units 3 & 4 AOR, 2018 Model Year
                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                                   Westinghouse Non-Proprietary Class 3                                           Page 12 of 18 LARGE BREAK LOCA DESIGN CHANGE REBASELINE EVALUATION

===Background===
Numerous AP1000 plant design changes have occurred since the AP1000 Core Reference Report large break loss-of-coolant accident (LBLOCA) analysis was performed [1]. The design changes impacting the LBLOCA analysis included numerous passive core cooling system (PXS), vessel model, containment pressure, reactor coolant system (RCS), and secondary system changes.
These items represent changes in plant configuration or associated set points, distinguished from an evaluation model change in Section 4 of WCAP-13451 [2].
Affected Evaluation Model(s) 2004 Westinghouse Realistic Large Break LOCA Evaluation Model Using ASTRUM Estimated Effect An LBLOCA rebaseline evaluation was performed using the latest code versions with model corrections to determine an updated limiting peak cladding temperature (PCT) considering the AP1000 plant design changes up to May 5, 2014. The updated evaluation resulted in a PCT penalty of 54&deg;F against the AP1000 plant Core Reference Report analysis [1].
References
: 1. WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
: 2. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
AP1000 is a trademark or registered trademark of Westinghouse Electric Company LLC, its affiliates and/or its subsidiaries in the United States of America and may be registered in other countries throughout the world. All rights reserved. Unauthorized use is strictly prohibited. Other names may be trademarks of their respective owners.
                                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                                   Westinghouse Non-Proprietary Class 3                                           Page 13 of 18 SMALL BREAK LOCA DESIGN CHANGE REBASELINE ANALYSIS

===Background===
Numerous AP1000 plant design changes have occurred since the AP1000 Core Reference Report small break loss-of-coolant accident (SBLOCA) analysis was performed [1]. The design changes impacting the SBLOCA analysis included numerous passive core cooling system (PXS), automatic depressurization system (ADS), reactor coolant system (RCS), containment pressure, and secondary system changes.
These items represent changes in plant configuration or associated set points, distinguished from an evaluation model change in Section 4 of WCAP-13451 [2].
Affected Evaluation Model(s) 1985 Westinghouse Advanced Plant Small Break LOCA Evaluation Model with NOTRUMP.
Estimated Effect An SBLOCA rebaseline analysis was performed using the latest code versions with model corrections to determine an updated limiting peak cladding temperature (PCT) considering the AP1000 plant design changes up to August 4, 2014. The updated analysis resulted in a PCT penalty of 243.5&deg;F against the AP1000 plant Core Reference Report analysis [1].
References
: 1. WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
: 2. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
AP1000 is a trademark or registered trademark of Westinghouse Electric Company LLC, its affiliates and/or its subsidiaries in the United States of America and may be registered in other countries throughout the world. All rights reserved. Unauthorized use is strictly prohibited. Other names may be trademarks of their respective owners.
                                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                                   Westinghouse Non-Proprietary Class 3                                           Page 14 of 18 AP1000 PLANT LAR-133 EVALUATION

===Background===
The design changes associated with License Amendment Request (LAR) 133 are changes to automatic depressurization system (ADS) Stages 1, 2, 3, and 4 line resistances and in-containment refueling water storage tank (IRWST) line resistances. These changes impact the AP1000 plant small break loss- of-coolant accident (SBLOCA) analysis. These items represent changes in plant configuration or associated set points, distinguished from an evaluation model change in Section 4 of WCAP-13451 [1].
Affected Evaluation Model(s) 1985 Westinghouse Advanced Plant Small Break LOCA Evaluation Model with NOTRUMP.
Estimated Effect Updated SBLOCA calculations using the latest limiting SBLOCA transient have been performed to assess the impact of the changes to the ADS Stages 1 - 4 and IRWST injection line resistances associated with LAR-133. The updated calculations resulted in a 144&deg;F PCT penalty, which is assessed against the AP1000 Core Reference Report analysis [2].
References
: 1. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
: 2. WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
AP1000 is a trademark or registered trademark of Westinghouse Electric Company LLC, its affiliates and/or its subsidiaries in the United States of America and may be registered in other countries throughout the world. All rights reserved. Unauthorized use is strictly prohibited. Other names may be trademarks of their respective owners.
                                              &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                         Westinghouse Non-Proprietary Class 3                     Page 15 of 18 UO2 FUEL PELLET HEAT CAPACITY

===Background===
A typographical error was discovered in the implementation of the UO2 fuel pellet heat capacity as described by Equation C-4 of WCAP-8301 [1] for fuel rod heat-up calculations within the Appendix K Large Break and Small Break LOCA evaluation models. The erroneous formulation results in an over-prediction of heat capacity that increases with fuel temperature. The corrected formulation results in a maximum decrease in heat capacity on the order of approximately 1.2% for existing analyses of record.
This represents a Non-Discretionary Change in accordance with Section 4.1.2 of WCAP-13451 [2].
Affected Evaluation Model(s) 1985 Westinghouse Advanced Plant Small Break LOCA Evaluation Model with NOTRUMP.
Estimated Effect The small over-prediction in UO2 fuel pellet heat capacity has been evaluated to have a negligible effect on existing large and small break LOCA analysis results due to the small magnitude of the change, leading to an estimated PCT impact of 0&deg;F.
References
: 1. WCAP-8301, LOCTA-IV Program: Loss-of-Coolant Transient Analysis, June 1974.
: 2. WCAP-13451, Westinghouse Methodology for Implementation of 10 CFR 50.46 Reporting, October 1992.
                                    &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                           Westinghouse Non-Proprietary Class 3                        Page 16 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                     Vogtle Unit 3 and Unit 4 Utility Name:                   Southern Nuclear Operating Company EM:                             ASTRUM (2004)
AOR

== Description:==
Best Estimate Large Break Summary Sheet Status: Current Vogtle Unit 3 SV3_LOCA-50.46_SV3_Base_ASTRUM - 1.2 V.V PCT (&deg;F)           Reference #       Note #
ANALYSIS-OF-RECORD                              1936                  1             (a)
Delta PCT                                              Reporting ASSESSMENTS*                                   (&deg;F)            Reference #       Note #            Year**
: 1. Revised Heat Transfer                                                                           2013 11                   2 Multiplier Distributions
: 2. Error in Burst Strain Application           23                   3                              2013
: 3. Design Change Rebaseline                                                                        2018 54                  4,5            (b)
Evaluation AOR + ASSESSMENTS                           PCT =      2024.0 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
2    LTR-LIS-13-357, AP1000 Plant 10 CFR 50.46 Report for Revised Heat Transfer Multiplier Distributions, July 2013.
3    LTR-LIS-14-41, AP1000 Plant 10 CFR 50.46 Report for the HOTSPOT Burst Strain Error Correction, January 2014.
4    LTR-LIS-18-393, Update to the Vogtle Units 3 & 4 LBLOCA and SBLOCA 10 CFR 50.46 PCT Summary Sheets for LAR-79, November 2018.
5    ND-17-2074 (ML18029A243), Containment Pressure Analysis (LAR-17-043), December 2017.
Approved by NRC November 7, 2018 as Amendments 147 (VEGP Unit 3) and 146 (VEGP Unit 4)
(ML18289A742).
NOTES:
(a) Value contains 2&deg;F bias for PCT sensitivity to PRHR isolation, per Reference 1 response to CRR-008, Table 2 and Table 15.6.5-8.
(b) The design change rebaseline evaluation used current code versions and accounts for design changes up to May 5, 2014 and plant model error corrections.
                                      &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                         Westinghouse Non-Proprietary Class 3                          Page 17 of 18 LOCA Peak Cladding Temperature (PCT) Summary Plant Name:                  Vogtle Unit 3 and Unit 4 Utility Name:                Southern Nuclear Operating Company EM:                          NOTRUMP-AP AOR

== Description:==
Appendix K Small Break Summary Sheet Status: Current Vogtle Unit 3 SV3_LOCA-50.46_SV3_Base_Appendix_K_SBLOCA - 1.2 V.V PCT (&deg;F)            Reference #        Note #
ANALYSIS-OF-RECORD                            663.5                  1 Delta PCT                                                Reporting ASSESSMENTS*                                  (&deg;F)            Reference #        Note #            Year**
: 1. NOTRUMP Bubble Rise/Drift                                                                       2014 32                   2 Flux Model Inconsistencies
: 2. LAR-114 Evaluation                         13                 3,4,5            (a)              2016
: 3. LAR-133 Evaluation                        144                  6,7             (b)              2018
: 4. Design Change Rebaseline                                                                        2018 243.5                 8,9             (c)
Analysis AOR + ASSESSMENTS                         PCT =       1096.0 &deg;F
* The licensee should determine the reportability of these assessments pursuant to 10 CFR 50.46.
** The Reporting Year refers to the annual reporting year in which this assessment was included.
REFERENCES 1 WCAP-17524-P-A, Revision 1, AP1000 Core Reference Report, May 2015.
2    LTR-LIS-15-5, Updates to the AP1000 Plant SBLOCA 10 CFR 50.46 PCT Rackups, January 2015.
3    LTR-LIS-16-144, Update to the AP1000 Plant SBLOCA 10 CFR 50.46 PCT Rackups for LAR-114, January 2017.
4    LTR-LIS-17-59, AP1000 Plant 10 CFR 50.46 Annual Notification and Reporting for 2016, March 2017.
5    ND-16-0984 (ML16207A340), Automatic Depressurization System (ADS) Stage 2, 3 & 4 Valve Flow Area Changes and Clarifications (LAR-16-012), July 2016. Approved by NRC December 29, 2016 as Amendment 62 (ML16357A640).
6    LTR-LIS-16-429, Update of the AP1000 Plant SBLOCA 10 CFR 50.46 PCT Rackups for LAR-133, January 2017.
7    ND-17-0443 (ML17090A209), PXS/ADS Line Resistance Changes (LAR-17-009), March 2017.
Approved by NRC February 28, 2018 as Amendments 111 (VEGP Unit 3) and 110 (VEGP Unit 4)
(ML18026A566/ML18026A571).
8    LTR-LIS-18-393, Update to the Vogtle Units 3 & 4 LBLOCA and SBLOCA 10 CFR 50.46 PCT
                                    &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved

DCP_NRC_000146                          Westinghouse Non-Proprietary Class 3                        Page 18 of 18 Summary Sheets for LAR-79, November 2018.
9   ND-17-2074 (ML18029A243), Containment Pressure Analysis (LAR-17-043), December 2017.
Approved by NRC November 7, 2018 as Amendments 147 (VEGP Unit 3) and 146 (VEGP Unit 4)
(ML18289A742).
NOTES:
(a) The LAR-114 evaluation assesses the impact of reduced automatic depressurization system (ADS) Stage 2, 3, and 4 flow areas described in design change proposals (DCPs) 5051 and 5054.
(b) The LAR-133 evaluation assesses the impact of updated ADS Stages 1 - 4 and In-Containment Refueling Water Storage Tank (IRWST) line resistances described in DCPs 4903 and 5138.
(c) The design change rebaseline analysis used current code versions and accounts for design changes up to August 4, 2014 and plant model error corrections.
                                    &#xa9; 2019 Westinghouse Electric Company LLC All Rights Reserved}}