View source for PLA-5834, Request for Exemption from 10 CFR 20.1703 and 10 CFR 20 Appendix a Use of Delta Protection French Designed Respiratory Protection Equipment

{{Adams
| number = ML043630029
| issue date = 12/14/2004
| title = Request for Exemption from 10 CFR 20.1703 and 10 CFR 20 Appendix a Use of Delta Protection French Designed Respiratory Protection Equipment
| author name = Mckinney B
| author affiliation = PPL Susquehanna, LLC
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000387, 05000388
| license number = NPF-014, NPF-022
| contact person = 
| case reference number = PLA-5834
| document type = Letter type:PLA
| page count = 46
| project = 
| stage = Request
}}

=Text=
{{#Wiki_filter:Britt T. McKlnney               PPL Susquehanna, LLC                     I I  '   I Vice President-Nuclear Site Operations                769 Salem Boulevard             "*      a oI Berwick, PA 18603
* Tel. 570.542.3149 Fax 570.542.1504                   i btmckinney~pplweb.com                             - -
DEC   1 4 2004                                                                            p   p 1 ..
U. S. Nuclear Regulatory Commission Attn: Document Control Desk Mail Station OPI-17 Washington, DC 20555 SUSQUEHANNA STEAM ELECTRIC STATION REQUEST FOR EXEMPTION FROM 10 CFR 20.1703 AND 10 CFR 20 APPENDIX A RE: USE OF DELTA PROTECTION FRENCH DESIGNED RESPIRATORY PROTECTION EQUIPMENT                                                    Docket Nos. 50-387 PLA-5834                                                                                   and 50-388 Pursuant to the provision of 10 CFR 20.2301, "Application for exemptions," PPL Susquehanna, LLC is requesting an exemption from certain requirements of 10 CFR 20.1703, "Use of individual respiratory protection equipment" and Appendix A to Part 20, "Assigned Protection Factors for Respirators." The exemption request is provided as an enclosure to this letter.
PPL Susquehanna, LLC has identified the Delta Protection suits as having benefits from a contamination control, heat stress reduction, improved worker safety and respiratory protection point of view. These suits have no NIOSH approval for use as a respirator in the United States. Pursuant to 10 CFR 20.1703(b), PPL Susquehanna, LLC must request authorization for use of equipment that has not been tested or certified by NIOSH.
Pursuant to 10 CFR 20.1705, PPL Susquehanna, LLC must obtain authorization from the Nuclear Regulatory Commission before using assigned protection factors in excess of those specified in Appendix A of 10 CFR 20. Since these suits have no NIOSH approval for use as a respirator in the United States, PPL Susquehanna, LLC is requesting authorization for their use as respiratory protection equipment and assignment of a protection factor.
The enclosure provides the documentation supporting the request. As described in the enclosure, approval of the request would improve worker safety in areas of airborne radioactivity and high potential for facial/skin contamination from hot particles.
PPL Susquehanna, LLC has identified the following as commitments associated with this request.
: 1. The Mururoa V4 MTH2 single use suit will be integrated into PPL Susquehanna's, LLC respiratory program using the information provided by the manufacturer.
C7O)\

Document Control Desk PLA-5834
: 2. New lesson plans will be developed to train workers on Mururoa's features, donning, use and removal, cautions and use of mouth strip and tear off strips for routine and emergency egress.
: 3. Radiation Protection personnel will be provided additional training for selection, approval, issue, equipment set-up, operation and maintenance instructions for the Mururoa suit.
Approval of the suit's use will allow PPL to proceed with procedure changes and complete training necessary for the use of the V4 MTH2 suits at Susquehanna for the Spring 2005 outage. Therefore, PPL Susquehanna, LLC is requesting approval by February 1, 2005.
If you have any questions, please contact Mr. Cornelius T. Coddington at (610) 774-4019.
Sincerely, B. T. McKinney Enclosure - Approval Request for Delta Protection Mururoa Single Use Enclosed Suits cc:    NRC Region I Mr. A. J. Blamey, NRC Sr. Resident Inspector Mr. R. V. Guzman, NRC Project Manager Mr. R. Janati, DEP/BRP

Enclosure to PLA-5834 Approval Request For Delta Protection Mururoa Single Use Enclosed Suits

Approval Request For Delta Protection Mururoa Single Use Enclosed Suits

==1.0 INTRODUCTION==
 ...............................................................                    1 1.1   Purpose ...............................................................                   1 1.2 Background ...............................................................                  1 1.2.1 Regulatory Requirements ............................................................... 2 1.2.2 Suit Construction ...............................................................       2 1.2.3 Safety Features of the Mururoa Model V4 MTH2 Suit ................................ 3 1.2.4 Implementation ...............................................................          4 2.0 TECHNICAL JUSTIFICATION ...............................................................         5 2.1 Evaluation ...............................................................                  5

==3.0 CONCLUSION==
 ...............................................................                      6

==4.0 REFERENCES==
 ...............................................................                      6 5.0 ATTACHMENTS 5.1 General Description Of The Delta Protection Supplied Air Suit 5.2 European Standard CEN/TC 162 N 738 For Ventilated Protective Clothing 5.3   Certificate No. 0073/197/162/01/96/0001 For Mururoa V4 MTH2 Issued By The Institute For Nuclear Protection And Security 5.4 Protection Factor Determined During Fit Test Exercises For Mururoa V4 MTH2 5.5 Donning And Removal Instructions For Mururoa V4 MTH2

Enclosure to PLA-5834 Page 1 of 6

==1.0     INTRODUCTION==

1.1     Purpose 10 CFR 20, Appendix A, "Assigned Protection Factors for Respirators," states that an air-supplied suit may be used in a continuous-flow mode, however, an Assigned Protection Factor (APF) has not been designated. A footnote to this equipment application indicates that the suit can be used in a respiratory protection program if the minimum program requirements are meet (e.g., 10 CFR 20.1703, "Use of Individual Respiratory Protection Equipment"). 10 CFR 20.1703 states that use of non-National Institute for Occupation Safety and Health (NIOSH) equipment is acceptable only if approved for use by the Nuclear Regulatory Commission (NRC). Since 10 CFR 20, Appendix A does not specify an APF for these air-supplied suits, 10 CFR 20.1705, "Application for Use of Higher Assigned Protection Factors," would have to be exercised in order to obtain NRC approval for exceeding the requirements of 10 CFR 20, Appendix A.
PPL Susquehanna, LLC proposes the use of the Mururoa "fully enclosed suit" model V4 MTH2 manufactured by Delta Protection, France. The purpose of this submittal is to request approval for the use of these particular suits and for authorization to use an APF of 2000 when using the suits. Additionally, due to the advanced safety features for emergency breathing and emergency escape built into these suit models, PPL Susquehanna, LLC may choose to use the Mururoa suits without dedicated rescue personnel being assigned.
The Mururoa suit was accepted by the NRC in June 2003 for use by the Duke Energy Corporation as a respiratory device with a protection factor of 2000 (TAC NOS.
MB7952, MB7953, MB7954, MB7955, MB7956, MB7957, and MB7958). The Mururoa suits have been widely used in western European nuclear power plants (the manufacturer indicates that approximately 60,000 Mururoa garments/suits are used by these plants each year). The suits received certification for use by the Institute for Nuclear Protection and Security in 1996.

==1.2     BACKGROUND==

1.2.1 Regulatory Requirements The following regulatory requirements are relevant to this request.
10 CFR 20.1703, "Use of Individual Respiratory Protection Equipment," requires that if a licensee assigns or permits the use of respiratory protection equipment to limit the intake of radioactive material, (a) the licensee shall use only respiratory protection equipment that is tested and certified by NIOSH.

Enclosure to PLA-5834 Page 2 of 6 10 CFR 20.1703(b) allows that if the licensee wishes to use equipment that has not been tested or certified by NIOSH, or for which there is no schedule for testing or certification, the licensee shall submit an application to the NRC to authorize use of the equipment.
10 CFR 20.1705, "Application for Use of Higher Assigned Protection Factors," requires that a licensee shall obtain authorization from the NRC before using assigned protection factors in excess of those specified in 10 CFR 20, Appendix A.
10 CFR 20, Appendix A, "Assigned Protection Factors for Respirators," Item II, "Atmosphere Supplying Respirators (particulate, gases and vapors)," indicates that for a suit in a continuous flow operating mode, no APF is assigned nor is a NIOSH approval schedule currently available for the evaluation of such suits. This equipment may be used in an acceptable respiratory protection program as long as all the other minimum program requirements, with the exception of fit testing, are met (i.e., 10 CFR 20.1703).
Based on these regulatory requirements, PPL Susquehanna, LLC is required to obtain NRC approval for both the use of and a protection factor for the Mururoa model V4 MTH2 suit.
1.2.2 Suit Construction The Mururoa Model V4 MTH2 suit meets ISO 8194 and the European Standard EN.NF 1073-1. The manufacturer is ISO 9002 certified.
The Mururoa single use suits have the following desirable features that are not available in the "bubblehoods" and "rain suits" manufactured in the United States:
: 1)    One piece single use suit that includes welded gloves and booties with tie straps,
: 2)    Made of Ethyfuge with reinforced elbows, knees and crotch areas,
: 3)    Dual zippers - metal zipper inside and plastic zipper outside,
: 4)    Helmet made of clear Poly Vinyl Chloride (PVC) material that provides distortion-free vision and large enough for wearing a headset,
: 5)    Welded sleeve to insert communication cable,
: 6)    A removable strip near the mouth that could be used for emergency breathing in case of loss of supplied air,
: 7)    An egress strip stretching from left arm, over the head, to right arm that is used for undressing and for self-rescue in an emergency, such as loss of supplied air,
: 8)    Air intake located at the waist with a built-in regulator that can adjust, but not block, airflow,
: 9)    Two exhaust valves that provide ventilation, and also protect from overpressure,

Enclosure to PLA-5834 Page 3 of 6
: 10) Very low noise level at maximum air flow, and
: 11) Air flow to the arms legs and face.
Air hoses of any length can be used, but air shall be supplied to the Mururoa suits between 40-85 psig measured at the inlet. A regulator at the inlet can adjust the airflow from 43 CFM maximum to 9 CFM at the minimum. To ensure user safety, the regulator cannot shut off the air supply. Noise level is kept between 76 dB at maximum airflow to 58 dB at minimum airflow. Air flows through manifolds to the chest, hands and feet.
There are two exhaust vents on the back - one behind the neck and one at lower back.
The exhaust vents have patented magnetic seals to prevent any aspiration of contaminants if supplied air is lost. The Mururoa is approved for use with different fittings in Europe and can be fitted with Schrader or Foster or CEJN type fittings used at the PPL Susquehanna, LLC facilities.
The Mururoa Model V4 MTH2 suit is made of Ethyfuge material, which is incinerable.
Examination of the suit shows there are two air vents near the chin for cooling the face, as well as a distribution network for air to go to the arms and the legs.
1.2.3 Safety Features of the Mururoa Model V4 MTH2 Suit All Mururoa suit models are lightweight (2.5 lbs.), made of fire-retardant material and can be used in temperatures up to 1400 F., as per EN 1073-1. The suits have built-in gloves, booties with binding ties, and have reinforced elbows, knees and crotch. A transparent helmet with 6-inch X 8-inch clear faceplate provides distortion-free view.
Dual magnetic ventilation valves provide needed ventilation and relief of excess pressure in case suit is squeezed/pinched unexpectedly. Noise level at maximum airflow is less than 80 dB. Airflow can be adjusted by the user for his/her comfort, but cannot be shut off. In case of loss of air, the user can remove the mouth strip and move the opening close to his face, or enlarge the opening, to breathe outside air. Alternately, the user can pull the escape strip from either forearm, over the head and towards the other forearm, and rip the suit in two halves. This escape strip is normally used for egress from the suit when the work activity has been completed.
The Mururoa suit's design does not permit its use in an Immediately Dangerous to Life and Health (IDLH) atmosphere. PPL Susquehanna, LLC plans to use this suit for protection against radioactive particulate contamination only. The Mururoa suit is also not designed for use with any personal cooling units such as a Vortex tube, but can be used with a cooling vest supplied by the manufacturer, if desired.

Enclosure to PLA-5834 Page 4 of 6 1.2.4 Implementation PPL Susquehanna, LLC sites have respiratory programs in full compliance with 10 CFR 20. The Mururoa V4 MTH2 suits will be integrated into the PPL Susquehanna, LLC respiratory program using the information provided by the manufacturer. New lesson plans will be developed to train workers on the Mururoa's features, donning, use and removal, cautions and use of mouth strip, and tear off strips for routine and emergency egress. Radiation Protection personnel will be provided additional training for selection, approval, issue, equipment set-up, operation, and maintenance instructions for the Mururoa suit. The Mururoa suit's safety features, namely the tear-off mouth strip and the emergency tear-off strip, make it unnecessary for any standby rescue personnel.
Additionally, in many cases, workers are in direct contact with Radiation Protection or support personnel via audio headsets. The ability to eliminate the rescue worker is an ALARA consideration since the work areas where air-supplied suits are used are typically areas with higher radiation and contamination levels. Undervessel activities such as CRD and LPRM exchange, reactor cavity decontamination, and equipment decontamination are specifically targeted for the use of the Mururoa suit.
PPL Susquehanna, LLC will use the Corrective Action Program (CAP) to document and evaluate any unexpected problems with the suits. The manufacturer is subjected to checks from the IPSN (Institute for Nuclear Protection and Security) to insure the product has no risk of injury to the user. A second organization called ASQUAL (an advisory group to regulators) performs annual inspections of the factory to certify that the manufactured product is of the same quality approved by the IPSN. Several destructive/non-destructive tests are performed by the manufacturer for each order received from clients. Any defects reported by clients, investigations, and corrective actions are documented by Delta Protection, and are reported to licensees using our suits on a quarterly basis. Customers are notified of significant problems and products are recalled if necessary. This information is made available to ASQUAL for their annual inspections.
PPL Susquehanna, LLC currently uses air- supplied hoods, (commonly known as the bubble hood) for jobs involving overhead contaminated water, high potential for skin contamination from discrete radioactive particles, and to prevent intake of airborne contaminates. Because the bubble hoods do not cover the hands and the feet workers have to wear additional protective clothing, including two pairs of gloves, rubber shoes and booties and tape for sealing. Chances of cross contamination during undressing/exit from the contaminated areas are high. The Mururoa suits offer a better alternative (with their unitized construction and ease of removal) and should protect the worker much better against facial/skin contamination and airborne radioactivity. Approval of a protection factor of 2000 for the Mururoa suits would allow use of the Mururoa suits in PPL Susquehanna's, LLC efforts to control contamination incidents and prevent intakes during operational activities at all of the PPL Susquehanna's, LLC facilities.

Enclosure to PLA-5834 Page 5 of 6 2.0     TECHNICAL JUSTIFICATION 2.1     Evaluation PPL Susquehanna, LLC reviewed the following documents obtained from Delta Protection:
* General Description of the Mururoa Model V4 MTH2 Ventilated Suits (Attachment 5.1),
* European Standard EN 1073-1:1998 for Ventilated Protective Clothing (Attachment 5.2),
* Certificate No. 0073/197/162/01/96/0001 for Mururoa Model V4 MTH2 Issued by the Institute for Nuclear Protection and Security (Attachment 5.3),
* Protection Factor Determined During Fit Test Exercises for Mururoa Model V4 MTH2 (Attachment 5.4), and
* Donning and Removal Instructions for Mururoa V4 MTH2 (Attachment 5.5).
Based on a review of this documentation, the suits represent a better design than the currently approved "bubble hood" and "rain suit" combination and provide better worker protection with the data supporting an APF of 2000.
A key element of this review was the application of the European Standard and the Certificate issued by the Institute for Nuclear Protection and Security for the Mururoa suits. The European Standard (Attachment 5.2) requires that the suit material be tested for resistance to abrasion, flex cracking, puncture, blocking, tear and flammability, strength of seams, joins and assemblies, damage resistance of exhaust valves, designed flow rates for pressure range of supplied air, noise level, and quality of the visor.
According to the testing standard, three workers should perform standard exercises, each wearing two different suits inside a chamber filled with a test agent (Sodium Chloride) and measure the leakages during the exercise regimen lasting 20 minutes. Operating parameters are set to manufacturer's instructions. Standard exercises include walking on a treadmill at 2 mph (3 minutes), moving arms up and down above head while looking upward (3 minutes) and squatting continuously (3 minutes). To ensure worker's comfort, two additional practical exercises - walking at 2 mph (5 minutes) and loading a bucket with wood chips from the base of a hopper and emptying it into the opening on top (15 minutes) - should be performed by two workers at specified air flow rates. Certificate No. 0073/197/162/01/96/0001 (Attachment 5.3) states that the Mururoa Model V4 MTH2 passed in all categories tested and provided a protection factor greater than 50,000. It should be noted that the term 'protection factor' used in the European Standard is

Enclosure to PLA-5834 Page 6 of 6 equivalent to the 'fit factor' used in the United States and is not the same as the Assigned Protection Factor used in 10 CFR 20.
PPL Susquehanna, LLC also conducted an in-house inspection and demonstration of the suits. This inspection/demonstration indicated that the Mururoa suits are an improvement over the currently used suits due to their ease in donning and removal.
Additionally, the NRC approved the use of the Mururoa Model V4 MTH2 suit with an APF of 2000 for the Duke Energy Corporation in June 2003 (TAC NOS. MB7952,
*MB7953, MB7954, MB7955, MB7956, MB7957, and MB7958).

==3.0     CONCLUSION==

PPL Susquehanna, LLC requests the approval for the use of the suits as per 10 CFR 20.1703(a), which requires use of respiratory protection equipment that is tested and certified by NIOSH or alternatively which is approved for use by the NRC. Based on in-house inspection of suits and review of industry and manufacturer test documentation, PPL Susquehanna, LLC has determined that the Mururoa V4 MTH2 model air supplied suits offer a safer and more efficient means to protect workers in areas of either high radiological contamination and/or high potential for airborne contamination. The existing rain suits and bubble hoods provide cooling only to the head and force workers to wear the ensemble in a manner that makes self-rescue nearly impossible, thus requiring a rescue worker to be stationed nearby. Ease of removal of the Mururoa suit provides for more desirable self-rescue features. Additionally, the Mururoa suits provide a means to undress that minimizes the potential for personnel contamination events.

==4.0      REFERENCES==
: 1. 10 CFR 20.1703, "Use of Individual Respiratory Protection Equipment"
: 2. 10 CFR 20.1705, "Application for Use of Higher Assigned Protection Factors"
: 3. 10 CFR 20, Appendix A, "Assigned Protection Factors for Respirators"
: 4. Regulatory Guide 8.15 (Revision 1), "Acceptable Programs for Respiratory Protection"
: 5. NUREG-0041, "Manual of Respiratory Protection Against Airborne Radioactive Materials"
: 6. European Standard CEN/TC 162 N 738 (July 1996)
: 7. EC Type Examination Certificate No. 0073/197/162/12/96/0001 for the V4 MTH2 suit dated January 10, 1996

Attachment 5.1 to PLA-5834 General Description Of The Delta Protection Supplied Air Suit

Att. 5.1 to PLA-5834 Page 1 of 5 NO: Do/ USA/ 1 MURUROA INDICE: a                         V4 FULLY ENCLOSED SUIT                                v-DATE__APPLICATION__06/09101 D                  GENERAL DESCRIPTION DELTAO04PROTECTION 66 89 18 36 PAGE :114 MURUROA SUIT The Mururoa suit is a single use garment designed to be used in radioactively contaminated environments. It has been widely used In western European Nuclear Power Plants for more than 20 years, without any major problem (the French state company: Electricit6 de France use 60,000 garments each year).
The Mururoa suit Is a fully enclosed PVC plastic, supplied-air and pressurized suit, that offers excellent protection factor ( -100,000) against any solid, liquid, or gas pollutant, minimizing discomfort and heat stress and increasing the workers efficiency.
The Mururoa suit is C.E. approved and complies with CE standard EN:1073-1 "Protective clothing against Radioactive Contamination' It also fulfils the requirements of the I.S.O. 8194 standard "Radiation Protection-Clothing for protection against Radioactive contamination-Design selection testing and use"

Att. 5.1 to PLA-5834 Page 2 of 5 N0 : Do/ USA/ I INDICE: a                                  MURUROA
____________a       _V4                 FULLY ENCLOSED SUIT DATE DAPPLICATION  :06/09/01 GENERAL DESCRIPTION DELTA 04PROTECTIOA 66 89 18 36 PAGE :2/4 VENTILATION I EXHAUST In the supplied-air Mururoa suit, the ventilation system is composed of
          -   An airflow control valve, preset to a minimum flow of 250 litres/minute (9 CFM) at 3 bar (42 PSIG), located on the right hip and covered with a protection flap. This flow can be adjusted, from 250 to 1150 litres (9 CFM to 41 CFM) per minute. 1150 litres is obtained with the tap fully opened at the feeding pressure of 6 bar (85 PSIG) (refer to graph in annex 11).
          -   A silencer bag which attenuates the noise level less than 58 dBa at 250 litres/minutes to 76 dBa at 1150 litres/minute.
          -   A manifold system welded to the suit and distributing the air to the helmet, the legs and the arms.
          -   An exhaust by two world patented valves placed in the helmet and in the back. These valves ensure a remarkable airtight seal in case of accidental air-feed cut off, or when putting the suit in under pressure through abrupt movements. The valves regulate the overpressure in the garment between 3 mbar (0.042 PSIG) and 10 mbar (0. 142 PSIG) for supply air pressure between 3 bar (42 PSIG) and 6 bar (85 PSIG)
           -  The benefits of this system are
                      - High heat removal through superior airflow
                      - Non irritating diffuse ventilation
                      - Resistance free breathing
                      - High level of comfort for long and strenuous jobs in contaminated areas
                       - Very low noise level

Aft. 5.1 to PLA-5834 Page 3 of 5 N0: Do /USAI/
MURUROA                                          /k INDICE: a                           V4 FULLY ENCLOSED SUIT                                      -
DATE DAPPLICATION :06/09/01 GENERAL DESCRIPTION DELTA 04PRO       TECTIOAi 66 89 18 36 PAGE :3/4 DESIGN CHARACTERISTICS
         -   One piece PVC, fire proof sult. (Thickness 20/100mm for technical data concerning the material, refer Annex I of this document)
         -   Welded PVC gloves
         -   Incorporated overboots with strengthened sole
         -   Binding ties on the overboots
         -   Reinforced elbows, knees and crotch
         -   Dual zipper system:       - metal zipper for mechanical strength
                                      -  PVC zipper for air and gas lightness (0.30 PVC thickness)
         -   Supple transparent PVC helmet, fitted with a transparent distortion free, PVC face plate 6"x 8" giving almost the same optical quality as glass.
         -   Quick release strip from forearm, overhead to forearm, for easy removal. This is used both for undressing or emergency egress. (Emergency egress takes less than 3 seconds).
         -   Quick release strip for access to the mouth.
         -   Welded sleeve for communication cable.

Att. 5.1 to PLA-5834 Paae 4 of 5 N0 : Do / USA / I MURUROA INDICE: a                         V4 FULLY ENCLOSED SUIT                                 -
DATE DAPPUCATION       DATED-APLIATIN
:06/09/01           GENERAL DESCRIPTION  :610/01DELTAC 04 66 89 18 36      PRO TECTIOA PAGE :4/4 GENERALCONSIDERATIONS THE MURUROA SUIT IS AVAILABLE IN SIX SIZES Size  0 1,55 m r                1,62  meter      5 feet I inch -     5 feet 4 inches Size  1 1,60            -4      1,68  meter      5'3"          -     5'6" Size  2 1,68            -       1,74  meter      5'6"           -4   5'8K Size  3 1,74            -       1,82  meter      5'8"          -     6'0" Size  4 1,82            -4      1,92  meter      6'0"          -     6'3" Size  5 1,92            -       2,05  meter      6'3"           -    6'8" But if any individual selects a suit size different from the recommended size, the operating and safety characteristics will not change.
WEIGHT                          1200 grams (2.64 LBS)
FEEDING PRESSURE                6 bar (85 PSIG)
FLOW                            450 up to 1150 Lit/minute (16 - 41 CFM)
STORAGE
          -   The suit should be used by the third year from the date of manufacture.
          -   It must be stored in its original packaging.
          -   The storage temperature has to stay between 00 C and 600C (32 0 F - 140'F)
          -   If the storage temperature was below 5&deg;C (410 F) the suit must be stored approximately 3 hours at a room temperature until the suit become flexible.
          -   The usage temperature range + 50 C and + 550C (410 - 1310 F) depends on air fed temperature

Art. 5.1 to PLA-5834 Page 5 of 5 N0: Do / USA / 1 MURUROA                                      /k INDICE: a                         V4 FULLY ENCLOSED SUIT DATE VAPPLICATION :06/09/01 D1          GENERAL DESCRIPTION DELTAO04PROTECTIQA 66 89 18 36 PAGE :5/4 MATERIAL PROPERTIES Technical characteristic of PVC material 20/100 mm using French standards, which would correspond to ANSI standards.
Characteristic                 Standards           Results               Units Density                    NFT 51063              1.38              gm/cm3 Traction Resistance                NFT 54102             &#x17d; 143               N/cm2 Stretch before tear              NFT 54102             2 178                  %
Tear resistance                NFT 46007        2       45               N/cm2 Weld resistance than material resistance     NFT 54122       Peel 50     Tear 65          %
Resistance to cold               NFT 51102                             _      C cc-10 Vapour permeability                NFH 00030              34.1              g/m2/24h Volatility on activated charcoal        NFT 51167
* 6                  %
Spark perforation               NFC 26225               9.2                 KV

a Attachment 5.2 to PLA-5834 European Standard CEN/TC 162 N 738 For Ventilated Protective Clothing

Att. 5.2 to PLA-5834 Page 1 of 13 FINAL DRAFT EUROPEAN STANDARD                                                    prEN 1073-1 NORME EUROPtENNE                                                        CEN/TC 162 N 738 (1996{
EUROPAISCHE NORM                                                        (AMdy i936)J
*ICS1 3l~280: 13.34010 0.scriptorm:
Enguh verSon Protective clothinigagalnst jii'Udoaectiv coantairartion Part 1: Requirements -zd iest'mithods f&.v-ie~fiet~~d pYtoectdve: doOhlng agufnst particuiste
                                           .ad~ccttvi."coinmnkum~on Vrtwrnewfl de protection c-ontre Reccnt~rkTuixtlc             schu.~k~edung gagen rad~oakriveKcnui~nahticn -
.rad;0ioVe.. Pvnt'Ie 1: U2neces at Mithodis.c dssbi           Tei I, -Az'f~drdeuigwr; uird Prr~verfahren ftr be!Ofteze
    ~c~r itemritdo p~roticioiln vmnhtilk conire to               Sewikli'cung Segeii rad6aic~ive kontamination cintarninai n radioactive sous forrme de panicules            dLWaJh fesle panIJC*
Thts drsft Euitpean Standard is zaubmncted -to tEN merniters for f crmal vote.
whls been~Cruwn u.; by Tochnical Conwnhrto         CE.417C 162.
if thi" diaf becomes a Zuropemi Standard. CEIN murnbers -arebound to Comply VwiUh thie CENW6ENELECInteral Regulitiorms -.0irh iiiculate,theon4ici-sor Sig 'this Emro-pean Standard -the status of sna xonal emandardi wfthcut any ataRutlori This draf: European -Stanidard wase estabished by CEN hinthree WF=W~a Vetelx;6ns. IluWgsL
               .French. German). A ~Verion In~ aeny other Ia*guan made by Iraniatn' urideft.he retpon-61!tikyof'a CEN ftiarnbi imt itis own uiae and imoifid toctIbG Cinta Se'cretariat has the same mitatsas the btffcial versions.
CEN rnen~beis are iheratinal~ sandards bodies of Austria.1Bulglurn. Demwnak. Finland, France. C-emrnany. Greece; lcelimd. kula-nd, ltz1.luknov.Nehra.                        NorwaY.
CEN Evrmpean Cormnt et f-amndard-c-tien o
Comiri .Eufopken de'n:rmaftation
                                             &#xa3;uropsche %om -fahr Normng~r Cenuai Secrezariat: rue de Stazss't 31. B-i 050       ust;l$
1 1996. Copyright reserved to CEN members.                                               Fiat. No- PrEN 1073-1 '. 1996 E

Att. 5.2 to PLA-5834 Page 2 of 13
                                   ~~..                                                                                    . .......... ..........
Prge 2
.prEN1O73-V: 1*996
*Conutnu 2 Nk rmatviv,     renmts .....                                     ......
4 besnIr..     ....                           .....    *...                                   ....       .....                     ..........
5 Requnts               ..                                                      .                              .                           .....
6 Test mthads           -....                                                     *.
7  Mar        -'ki'ng'....  .   .  . ' .  *  ...-       . .
                                                     ''^,t''''*- ...-          ...    't.'.'..             .       .
I   t...    . 4  '   I   It  6 _
* t;+        . .  .    . ... . . .
'a Manufacturrs'Informtniitn...........                                                   4.      ...............
AnnexzA tnomzati A cncu             cfche                                the protecvon tacor                     r.*...........                                                                 ...                12 Annex ZA tdformativel Causes cf tih E'.jtoeen S:widard addretshs tizenw                                  rgLu                  wr'r.s
                                                                                                           -                  crvo.-her provisicr-ef EU Directiv e               _      ....-..                         ........                                   .                                                       .                t

Att. 5.2 to PLA-5834 Page 3 of 13 Page 3 prEN 1073-1: 1996 Foreword This European Standard has been prepared by the Technical Committee CENITC 162 'Protecive clothing including hand and arm protection and lifejackets' the secretariat of which is held by DIN.
This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive 89/686/EEC.
For relationship with EU DirectivelsI, see informative Annex ZA. which is an integral par, of this standard.
The annex A is normative and contains the activity sequence for the testing of the protecticn factor.
Further parts of this standard will deal with requirements for unventilated protective clothing and protection against liquids and gases.
In accordance with the CEN/CENELEC Rules, the following countries are bound to implement this European Standard:

Att. 5.2 to PLA-5834 Page 4 of 13 O'EM 1073-1 :1995 scope This, Evroo an Standard sp#cifie :ho chzracteiistic3 of vrwntl2%ate cilothing prbtecting the wearer -agahrts.
0*' rculai radioactive conumnation, Ttt4 European -Standard does rnot apply terj"i P.ogtOlwn agairst Jontihig adaisTiof #nd iha protection of pats'aeint cnt.              nitradoacivesubs3tances by diagnosticait andloihi~rao'quizil Mia~sures.
2 Normatlif' references:
This Etxopean standard bIneo4otates by dated or unda~ed tsfgrynce. provislons from other publicatlom. These Tlorn~aivi refetencts wec cited a~t the approdiAte places in the ~text kn~d tfie pub~ca iorms are Listed hareife.,for diated tefeigncess subsequ~emT~arnnanwents to oirarvls;Chs of any of these pubktldczn% apply tothIs European istlndard Only when iineorpoprated mn.k by armendentn w.rvyisIGon. For ismidated 4eferences the laem *dikjon c theC~bica~onreferred to aopks.
EN .1 4 Rpiuoyprotective devic-ts -Powered fkatedn .0evies Incoepa~rating belmats. cr twods - Recuirmernews.
EN 270
       'Respiratory, protective .dtvkea - Cornpjessd *;r 5ne breathing xopvatus Anrpcrating a tsood -. Reqtire-m~ntseiing.me ing' EN 340
     'Protective clothznG - Camaral recuirerments EN. 530
       -Abrasroni  reistince of prateE:iVe clothIng Miter Ial Test rmediod
 'EN 883
      *Pratactive clottmn;       Me     enc-,fic*f prowites. Test meuIMd: P=.CturI resistance FrEN p43-11 Protective rlothing f or us~e agaInst ,~lqud *nd gaseous c]hetrnclc. inctudiig kqu~d atecoiso and sold partIcles
* Ferfornsatce riWrkan~erttzfor .VftWatedand zwrn-vtntilitrd %gms:tight' tType 11 eric 'civ-l;s-%tIgh:'
ITv;0-21 protective iloti~ng-PrIEN 11I6 retsoimaory- Frotectivet dewices for aedresttiv zSaf-contaime- ~a~ctci carmnctesiLd air brething Apparatus Inccrporatring a hood icatnpressod air #s3esaPe oAr*.u$ witnh 4oodl Razt.iriemnants. estn;,
marking.
EN 25S18 Rubbe'r Di planics Coatied 1abrios - bet* M-nation of blocking Itsfizanct Teizdes -7ast rnkhods -fcr nonwovtn-s              - Pai : V. ,    atct ofg ter ezvoanc iso .5082 Textes     -   oveztn fabrics-      testrmi1atin of Greain svrangth - Grac method 150.7854 flubbr or plastics cza,.ed latbice - Drtarin zicn ef irsistanze, to damage by flex~ing 4aynarnint Methoc6 3 Definiticins Fkr -. e purposes otatVsu            *rd.:h          aovWU oeiitr      z;oiy 3.1 'Protective cltigagainst .radioanctve .contarnin~adon Protecpven clothing ineredze to p;rovide prcteztion to =4 zk,an " if recumed to t.P ies:Jitcty tra=t 2;2irSt radioactive containnatiqr.
3.2 Wntila~ed protective clothing Protective clctting whticr is surplied with wtezth~abier ensuring w"memaf vrntaocn moncvierpressurv. Thz pfottiectwtcihing provides poteoticn against taiicac-rit conts rtau~on othrspacyta:adtewOI

Att. 5.2 to PLA-5834 Page 5 of 13 Page 5 prEN 1073-1 :1996 body.
3.3 Nominal protection factor (inward leakage. IL)
The ratio of the average concentrations of a test aerosol or gas measured in the ambient atmosphere and inside the hood of the protective clothing at the point where the wearer draws breath. The concentrations taken into account are the average concentrations recorded during a standardized test.
3.4 Radioactive contamination Presence of radioactive substances in or on a material or in a place where they are undesirable or could be harmful.
3.5 Seams A permanent fastening between two or more pieces of protective clothing material.
3.6 Assemblages A permanent fastening between two or more different garments. or between protective clothing and accessories, obtained. for example by sewing, welding. vulcanising. gluing.
3.7 Join A non-permanent fastening between two different garments, or between protective clothing and accessories.
3.8 Closure A device. for example. zipper. touch and close' fastener. etc.. to c!ose openings for donning or removing the protective clothing.
4 Design 4.1 Protective clothing against radioactive contamination shall comply with the general requirements specified in EN 340.
4.2 The design of the protective clothing shall be such that the protective clothing is straightforward to put on and take off. and to minimize the risk of contamination. testing according to practical performance test" Isee 6.2).
4.3 The clothing can be designed for single or multiple use.
4.4 The protective clothing (see 3.2) may consist of one or several parts. The clothing may be fitted with a respiratory protective device to enable the wearer to breath in case of failure of the primary air supply.
5 Requirements 5.1 Materials The materials used for protective clothing against radioactive contamination shall meet the requirements according to table 1 after the pretreatment in accordance with 6.1.1 and 6.1.2.

Att. 5.2 to PLA-5834 Page 6 of 13 Page 6 prEN 1073-1 :3996 --
Tabl 1:                   e      4~urthi mnaieoiaft tsio
    .ft4wqulrgm~t                clazzlfceat~on                           Test accordiig to                        -apprieable for reBUsable     'sigle use Ati~nts.6                 > 2000 !'yVckSe                 EN 53. Mitfr4c! 2                       yes             e
                                    *5) 2500 Cycks,t                      00 aiittsiv page'Ir &C-A4> 1000o Cyclnv                   jCordin to KUL'           943.
3>: Soo Cycies                       Iu*,d kpa 2 > 1 00 Cyais                      Downward presswze
__ __ __ _ _ _ _            >       l0OCycles               _     _      _      _    _      _
Flexc crackdng                    6 > 100O0OOCycles                   ISO 7854 Method .B                     yes             no tesa~c                    > 4CWO0 Cycjles 4> *100 cycjes Puncturre rgs                    3 >          100N                   iN 383                                  yes st*Ic.                   >            1ON Raxstmnce.10                     2i        blckn                     IOE978                                  ysro blocking                          I bokn tees n o wc hI_                  _   _   _  _    _  _ _  _   _   _   _  _   _    _   _   _  _   _   _
   'rear resistance                 "6>           ISO N                  ISO 9073-4                              Ves           'Yes
                                     .>              EO N 4>              40 N
                                       .>          .;2ON
                                   .2>               ION I )               21                _  _      _      _     _     _     _    _    _       _     _
        .R~awj~blty, ;f         shall not torrnznug to                  prEN 1'146          (sirngI              YIN           yes.
materiali. visor             bturn                                  'burnt~.us.I ind *rMc~ifarv parts__                         _    _   _   _    _  _  _  _    _    _ _   _    _   _    _   _     _   _
NOTE 1: tUnccvtid materials sha rmrbe Itsted &;ainst resistamce l0 black.lg., The tvs top~cri Shall be markced 'No: tesd'agai!%s                 ..
           'NO0TE 2:- It prate-.%on againwt hazardous cJherzicalsmis 'recquirad then testing has -to be curtr-.e out accordimqtg t the televant ihen c"l sia*4rds.
5.2 Ventilated protective dlotuini 5;2~1 teneral 52Requirements           lor the norrinW prptecdon factor fIlu Ven~1aed rosc~v clthig saM e cassfe~accotdi-g to tabie-2. Tes-ting accardin;- e~.. with the.
                 ~aya eues.a~ccrding to annex A. at. i~.9mlnrwn'n design a& flow rat,.

  ~I Att. 5.2 to PLA-5834 l                                                                                                          Page 7 of 13
:Paig 7 prEN 1073-1: 1996 Class          Malkimtx    tVuki of                henIakg ins         Nonina1 Prt~ci)*tn 1actor Atwe hood idutn  zrs       o acwihy             & ciVtktis A                0.01                0.0c                            20000 2
11
                                        '0.02
                                        .0.04 10
{        _
O02O 0.05.
__    _    1             I__ 0 0 5000 2000 N~oTc 1: milximurn:v'aku 1i cakcuated as th.s vv~rage ptfoprranJ~. ever .3 test sequences.
NOTr-.2: Nominal pr.owbo~n'tacw Is ihe recirocul of zihc IL. cbtatned ~uwing 3O acutivi 5.2.3.1 Seams Asample of eaclh type ci seam ahal be tested in mcc:rdincv vwfth ISO!50S2 Annex A2 lCcons wtntr.-M ioitriverset, Th~raw sp~tciriens of ia;h 1v~                         a.d e
ttsvnihS and ite zmean af each w et zthse saingies calculated.. Thie.1gaffnt.~asam pe a~manca shall be ciassidiei coding o .10                 o vVEs iof the pefrT.~';v in table 3.imuring he won". m'ean result Lt. Vw wiaka scam y.
It the test is not appkcable bicAus, ine stiengzh ef zhe             jrrvail is kvier than the stsenpth of -the seams..the value of nmiwedal ;tit'rtsistance should be used for claisaflczion of zhe sesms.
NOTE: The. itsv method described ;n ISO 5082 is only a~cablce lo wtaight ieams, j6nigr rtw pieces .'a atlierial.
Tabie 3:.C!=slfcon of seam sttngth Ciw         Seam ittmn~itt In N 5                 >300 1                        >    30I 5.=2.232joins anid aseii:riwag*s
     -The joinz and. is'sernblages birwwa Uth~sftt -anade claL,                           etween Cloves -and Asleaves.
     *bo=.sand ircuser'leg s.'sfla hi testd m accordance wrath B. a nd~wt":nd a DUE wj                  10 N.
5.2.4     so The %iisorshaI -carnl*.wizh tahle 4-Whire an~ii f'i cvmpunds-ae 'used cr sp~ci d byhth                    "anu.
lecturer th~ey Shall not* have an idversv.aftect on Vit he&aI Oimf.e wevers. cr an the ciothing.

Att. 5.2 to PLA-5834 Page 8 of 13 Page 8 PrE.N 1073-1 . 1996 1TblA4:          uf       ntsti tu vSor Progerties of the V;f   w                  Remitement                    f                 Tesdigs Distoiflrr of visvn'          The loss of ;zihr sha^l not %steed          io ra*d lletrs on an oitometrictl twoscae: oti the optometrbi''               chiirt-a distance of 5 mndun cha'z                                       thewaclcal p1oemanr, test
                                                                            .acordbing     to 8.2 Mechanical strengtt           shal not tb visibly. dwmged in              acotding totN 1iE suhaBway as to be Pkcly to afficvthe periormrance of the suit system 625 Akr supply sysUem
*Coupfings and cenections skl compN-wiAthl N270.
Thse coramection     etiween the compressd air su.pply tube and the suit. biludig atahments. tthicaded pir~. biltor Oe fpa.s. or rneans of et               ; gthe su toitheboy shallwftFstincs 250 N puN wthen tssttd according to e,5 .
NOTE     tShc~Id bi per crmed before The inward le3aJVe list.
5:2.6 BrthIng hose The treathnq hose shall comply with the req~uteents cl EN 270.
5.2.7 Air flow ;ale Two suit systeniis s-hO be tested, cne ofvt.icFh has to be precondined as zpecified -i                  .C.I    Wh" testrd the'mlr flow iate cnro th~e juit sirtitr she! no: be lets tha          the mnariutaeurers rrdnin    sn design flbw tate. Thi miximum fiow rite shall not ixcted she truaxlmum is.stated by the uMUf ctursr. Tor:
in accordance wVi%     6.3
'The .f1ow rase and thc dsl~itibior      ofth    airItnto The Su~t sytem     $s. n~ot cause disress to ie we srer by local iwoirsg. The heat stress has to b        considered.
* st hi acordanc* wis            5.2, kOTE. fHr stress has to be consJderod.
5.2.8 Air Iloa   rate warning device If an audible warnin; device is kncorporattd in the'suit fsrn            it shall c     ymply to EN 270F, except for the
*sodi Ptpresr     fevel wcSh may be in the ringe S5d8LAB to SO dS(A1 when measured anhe ears of tne we*xrc, The frequency ;ete of mte watning derici shig te berxeitn.2000 1OO 40tc i Five w*(ning devices:shad Itsested. on, of which tL" to s pre^ceitvoned assatcified In                        b.1,4.Te.
ring a cordrng so EN 270.
5.2.9 SupIjy vxlve If a vriable ccnrtious   hPbw Vahle is faed; -it Mil ClYnV ScEN 27C, The valve shall permit to ad3rsz the uir flow rate in .te tong 1tsmrn tht mninirJrni Ts the makirmtn as specifted in 5.2.7. I:ahall nao be osile to cose tile             0o rstrc the at fW         ~tbcv  she niUM         de;;n air flow rar*.
6.2.10: E"housu    devices Th* suit shabb provkied with eahaust devism hach shal zonninue loavork corretdv aherxne tesnrg of tne pressUre   hi thsui     Isit 5.2.1 1 1, during the ;raccaui zerttimrncr         Test isee S5.! and during 9le dettrminition ai mto proteticri factor Isee 6.4), Tisni             nacoccincue with 6,1.
tn 5.Z11     Pressure In the suit The overpreswsre shall rit       ticeud IC00 Ps mean and 20C0 Pa peak. A posUNve ptessur -shall be maintained. Testinj with the maximum Aif IL1-w rate during z1eac                  vsesuenac specdied in Annet A.

Att. 5.2 to PLA-5834 Page 9 of 13 Page 9 prEN 1073-1 :1996 5.2.12 Carbon dioxide content of the inhalation air The carbon dioxide content of the inhalation air. determined at the minimum air flow rate, shall not exceed an average of 1,0 % (by volume), tested according to EN 270. Two suits shall be tested. one of which has to be pretreated as specified in 6.1.1.
5.2.13 Noise associated with the air supply to the suit The noise measured in the suit at the ears shall not exceed 80 dBIA) at the maximum manufacturers' design flow rate. To be tested in accordance with EN 270. Two suits shall be tested. one of which has to be pretreated as specified in 6.1.1.
6 Test methods 6.1 Test preparations 6.1.1 Pretreatnwnt When the clothing is intended to be reusable the requirements forthe materials or the complete clothing shall be proved after 5 cycles of cleaning and disinfection according to the manufacturer's instructions for use before testing.
6.1.2 Conditioning All material samples shall be conditioned by storage at 120 = 2) 'C and (65 - 5) % relative humidity for at least 24 h. Star. each of the tests as specified in 6.1.3 and 6.1.4. within 5 min after removal from the conditioning atmosphere.
6.1.3 Visual inspection A visual inspection shall be carried out by the test house prior to the laboratory or the practical performance test. This may entail a certain amount of dismantling in accordance with the manufactu-rers' information for maintenance.
6.1.4 Preconditioning for the practical performance test If the manufacturer does not state the preconditioning atmosphere for the practical performance test.
the complete clothing shall be exposed:
a) for 4 h to a temperature of 1-30 : 31 *C and allowed to return to ambient conditions, followed by bl for 4 h to an atmosphere of 160 +/- 3) 'C at 95 % relative humidity. It shall then be allowed to return to ambient temperature.
6.2 Practical performance       test 6.2.1 General The tests shall be carried out by two test persons at 120 - 51 'C and a relative humidity of less than 60 %. The test temperature and humidity shall be recorded. The background noise shall not be greater than 75 dBMA).
The test persons shall be selected who are familiar with using such or similar protective clothing. The persons will be drawn from those people certified as fit to do so by the medical officer. The necessity of a medical examination before or supervision during the tests shall be at the testing coficers discretion.
Prior to the test there is an examination that the suit is in working-condition and that it can be used without danger. It more than one size of a c othing is manufactured the subjects are asked to select the appropriate size. Ensure that the air supply is within the specified parameters. Two suits shail be tested.
each being tested on one test person.
After fiting the suit each test person is asked 'Does the suit fit?'. If the answer is 'Yes'. continue the test. If the answer is 'No'. replace the test person or the suit.

Att. 5.2 to PLA-5834 page 10 of 13 Page 10 prEN 1073-1 :1996 6.2.2 Procedure During the tevs the following activities shall be done in simulation of the practical use of the suit:
     - the test shall be completed within a total working time of 20 min
     - walking on the level with regular rate of 5 km h 1 for 5 min
     - filling a small basket Isee figure 1. approximate volume 8 1) with 12 mm chippings {e.g. limes:one chippings) or other suitable material from a hopper which stands 1.5 m high and has an opening at the bottom to allow the contents to be shovelled out and a further opening at the top where the chippings may be returned. The person stoops or kneels as he wishes and fills the basket with chippings. He then lifts the basket and empties the contents back into the hopper. This is receated 15 to 20 times in 10 min.
11' Figure 1: hopper and basket 6.2.3 Information to be recorded During the practical performance test the clothing shall be subjectively assessed by the wearer and the following shall be recorded:
a) harness comfort Isee 6.61; b) security of fastening and couplings; c) accessibility of controls and pressure gauge Of fitted):
d} clarity and field of vision from the facepiece and/or visor; el clothing comfort:
f) ease of speech transmission; gI any other comments volunteered by the wearer.
6.3 Measurement of minimum and maximum air flow rate Connect the ends of the distribution system collectively to a sutable measuring device. Record the maximum air flow delivered at the manufacturers' specified air supply. If a control valve is fitted. record the maximum delivered air flow and the minimum delivered air flow.
The value of minimum and maximum air flow rate shall be determined under the condition of exercise 6 of Annex A (person standing still).
6.4 Determination of the protection factor The protection factor shall be determined in accordance with prEN 943-1. Sodium chloride test method shall be used. Activity sequences for testing are given in Annex A of this standard.
The determinaticn has to be done at the minimum design air flow rate (see 5.2.7).
On two test subjects four new suits shall be tested. Two suits per test subject.

Att. 5.2 to PLA-5B34 Page 11 of 13 PrEN't073-1 -1996 Forw eah kIndu~al test ac~ulate ih* aichmctdc man oc'tr Iibe time peitod.
CAiCulatw the rwtcntage Inwardlinakage JlU as Sollo(~s:
Cl C1 chaftenga concentration In'th.:es chivnber, Ci       me0an conca~rniraton jnthv bnetizng zon fat eazh exwerse For c~assifikation-according to tatle 2. the averg vhae foe tfw lout' sIte shall h i taken.
6.5 .J1n anrd aiseniilagda pu itst Assenii~bI thie misans vfiittachmiert #ccrdp         g to the mau tactur"erzformtn ario. -If the asii-rvbled item le.O.-"vr.bootj -is "itelf nopt tioni wnoush to apply the 'required Pv4 substhft#iw n itein that is.
tachon. artox Secuely                 fimd dhzW._ArPtY the requied.force idngirtiinfly~-Re=-rd at ihictl forc&
it varu or State LIhSt "atthe req~Ilrvi force k ves -vin Co rn;Lete'.
6.6 Exhauit tlvlca POl test Mout     ~dUwnytosoW*
ohesui                             etnbeand~s hv~d              i acid elt soverthat e otha                  azilyt thei exasevc.         yst'em of. teutarinqv~raqsmbnsI             iM         t~si     rui       h   ahus      favic ttw oad          ivetdy upouiek io the frrmig at vne vexaust deVice in zhe suit.
feta- foice opf $50 .:= 2.5) lJ to %heexhaust ticea anid hold fax 10 a. te~etm 10 fimeL~
Examine the exhaust idevice lor signs-cfotdasnag cr ftaik~e I7 Marking, The marking shall cicmpfy %whh-the usa~clf3*n1 -et EN 2340 With the pi                  a~m. as -ghiven in%figure 2.
The level 'of verfarrniar.ci of %lieIrvward $e~aoig tIL sU be markced as,.-
Ex'   cassi numrber laccztrlng to tatle V~.
Figure Z~'Pitavaran B Manufactuters' information The ticaw~tacturers, lnformtaton ha             rnply 14fth th  scecirtcs~ns of  Eb4f3.t TAhe1 I solowing infctfmation Shani be Sucriloi.d~d Anapy:
ft-Nstin~os fer'ftrming. using&sect;. rftrv. 'terenovn.g arz    vrStin.
p~ricalian; U at asofu envamerature range ec
     - tieits to be carred cut by -thi weare bvfore use OfI       reuitre-1.
     - maintenance and cleaning and deo42unainaticr bv a-.;. aboWe1in~g (it ruquiredl..
*The. mqanifactrers shall specify trie rquited supply Pressure aind flow range necessari to                    uni Warwhings OfTapfa~ripete) ShWl be -givtn sainwst protliiym Ekefy to be en~counter ad. as e.g.          tiest stress.
 'dvecndlng on mhe aier tiow tat.. wart Joad. enwrimenjal atrrosohere. and so on.

Att. 52 to PLA-5834 Page 12 of 13
-Page 1.2
 .piEN 107341       1996
-Annex-A (riorrnativ)
-:Acvty sequn~co lor the lestfrng           of the protectlon factor ltable A.1: Activity xeu~isecw for thea testing of thw pratection factor
          .N*       Activity senuaence loriiwh itistivngeo
           .1       dtress p rson In-the suit                                                   ____
2        don b~ots, slovts etc. as rewuired v.creing to "le manufaclurwra 3 ~       #soe to ante: test ctk mar. coiinec: tiubing ic the sample point                3
                   - no lest, awet             -
A SI tstabllsh backgrourW radinp 'atsamnpte clnc wit parison standing
                   $%inT  no lest agent start test agent -and slow :to stabilizaR I      a
            . I e.L.......
et a                         and pressure   at *=o#I pcint wim the petaoti san*{
walk-                                                                      I secorfd leaksge nd drnsur -az siamie pcir'TWth   w1        _.Oterson.iwel-Iutp kinc ati:aoin S Itm W0 tO stovtTwadninu 11        record eaie ard ptossure at sa~mple ;cint. versan moving Orms and town above hild keight and Idbking vo~vzrd., *.; lftn
             -       bject Ihalf brick) fromn desk totheU!le'-.el i2Jrecord Ieelcge an pressure at sample ;cit., plefson doingj Conti,                J ____
I 10 Is      aetand aneOw To dtsotrse vrth ces3cn 2fl Ch~ambet 14       diS4:ornn*C: smole tubes nd remove -peiicn from tint clhamoej aend iundriss subjeet_______
NOTE. Thu total trjia may Vary, alT irresjtv apc-mrwx~Je s'd are to srtalia con&d.iOns- WVhe.
doin~g squats, a silcW dsibgrate.iation is                    c_-nvTfiouzTY during zzci I3 2a.uiu0la Analyse resuts ~cvtrfkuJna2 mm~        of zac~h exircss osriocd Tz avoid carry over of teut: from one exerctse to the otiher.
Reccd cia~en~e~.a~alccntinueh* using a saEewate dewdr.{ifo;ssil~ej.
                     *:Rcod'ti re!+/-f is~ th skltovr                wfc~ tME.

Att. 5.2 to PLA-5834 Page 13 of 13 Page 13 PrEN 1073-1   196 Anhnex ZA (Info'rniat;IveI c1:auies      WS EfvEpmnnStodird addiessing esential requgmenrs or other provsons of EU Thds Eurcpv an Standard twas been prepared under a t=w4eat givtn ss CEN by tet Euopean Ccmrrksign izd ?tha Eiirooa-    Free 7rad As          ton -adi su pefr *ssentl remqu          ernts ct EU M*itectj WARNING Oiiher re~uirements and oihet EU DMecrvei vuy -,te &plabe to t0he produt~isl failing within the scop. of t4is sinidaed.
Ibe fclowing clauses cf tti~ftan.rmd -r* L6kely to supcon mtquirs.-ents of Direcave 891586lEEC.
Ainnex II:
EU-Diretive   B91686/EEC.Annexl                                 lIbiuvs~ of Wis isnrdgd 1.1 Dsfn Pinciples                                              I                   4 1.3 Comfortad eAfficici                                         l&#xa2; IA information sucnled bYlibe rnanufc urer'                                         8 2.2 PPE 'enclosing the vam of the body to be ct*cUd                             4 and 5 2.12 PPEtbaing oneorincre idermtificuln crrvczpnl:r=                                7 t rindlreitlv rte'tig to 4orath anCd iakt_
nlerks eirectiv 3.9 Radiation ptatecticl                                                        4 and 5 Co=Nliancv wfh the             ci Stlis sandard prcndes ont  irwari mlauss      c cootommig nvwth the secffic *s-ut       reizitmens of, the Diroctive conetrnie and"     sicated  ::S       ulalcns

Attachment 5.3 to PLA-5834 Certificate No. 0073/197/162/01/96/0001 For Mururoa V4 MTH2 Issued By The Institute For Nuclear Protection And Security

Aft. 5.3 to PLA-5834 Page 1 of 9 ECEC 96/10001 Page 119 X           INSTITUTE FOR NUCLEAR PROTECTION AND SECURITY Technical Center for Nuclear Equipment Certification In accordance with the directive 8916861EEC dated December 21 th 1989 comparing the laws of the States Members Legislations relative to the Personal Protective Equipments, and the decrees no 92-765, 766 and 768 dated July 29t 1992 transposing the directive into French Laws.
The organisation here below mentioned (IPSN / CTHEN) whose references are as follows:
    -    Address: B.P. n&deg; 6 - 92265 Fontenay-aux-Roses Cedex (France).
    -     Empowered by Order of the Ministries of Employment and Agriculture dated December           24 h 1996.
    -     Identified under the no 0073 (published in the EEC Official Publication dated July 23 th 1994).
Assigns the:
To the following Personal Protective Equipment model:
    -     Designation: Ventilated Protective Suit against Radioactive Contamination pressurised for a single use only.
     -    Commercial reference: MTH 2- ref. 841442 T.
     -    Manufacturer: DELTA PROTECTION I REDI - 69 210 Saint-Germain-Sur-L'Abresle.
    -     Certificate applicant: DELTA PROTECTION - ZA De Berret-30200 Bagnols-Sur-Ceze.
     -    Essential Requirements 

==Reference:==
EN 143, pr EN 1073 (nov. 1995), pr EN 943 (august 1995). EN 270, EN 146.
Date : January 10' 1996 G.BRUHL I Chief of CTHEN Nota : According to article R 223-62 of the 'Working Law, the empowered organisation should be informed of any modification made to the material subject of this EEC type examination certificate, as well as of any modification made to the contents of this technical file on which the delivered type certificate was based on (address, manufacturer name, quality insurance certificate extract, ...)
This certificate contains 12 pages n' 1/9 to 9/9

Att. 5.3 to PLA-5834 Page 2 of 9 ECEC 96/ 0001 Page 219
: 1. DESCRIPTION It is a Ventilated Protective Suit against Radioactive Contamination ventilated type - pressurised for a single use only, Its name Is:
MTH2 - ref. DELTA. 841 442 T The T values are defined according to the size of the suit.
The suit includes:
     -   A air tight suit with an incorporated hood
     -   A suit fastening system located on the back of the suit.
     -   A breathable air flow supply system.
     -   A air exhaust device.
     -   A safety strip for emergency opening located on the hood.
Front vew                          Profil Hood   -t
( MIAEbow reinforcement F_8dlW    W Ado be usd A dPI

Att. 5.3 to PLA-5834 Page 3 of 9 ECEC 96 10001 Page 3/9 1.1.       MAIN MATERIALS
     -    Skin of the suit:
White polyethylene: Ethyfuge 2000                     Thickness: 24/100 mm
     -    Hood:
PE Cristal - 301100 mm thickness.
     -    Visor:
PVC (astraglass) 50/100 mm thickness.
     -     Gloves:
PVC Sempersoft type - Size 9-91/2, and Semperstar type - size 10 100..
     -     Boots:
Polyethylene - 24/100 mm thickness , reinforced with PE cristal.
1.2.      COMPONENTS
     -     Internal Ventilation System:
It includes a total ventilation V4 fitted with a valve with CEJN (rdf:342) butt.
      -    Exhaust:
It includes two exhaust valves located on the head and on the back of the suit.
      -    Fastening device:
It includes a double zip fastener located vertically on the back of the suit
      -    Other components:
The suit includes:
      -    A safety strip for an emergency opening located on the hood.
      -    A acoustic link tunnel.
      -    A loop for breathable air supply pipe.
      -    Several internal strengthening pieces for elbows, knees and legs.
      -   A transparent window to visualise the dosimeter.
: 2.       CONFORMITY TO REQUIREMENTS 2.1. REQUIREMENTS FOR THE MATERIALS (except accessories: Gloves, slippers...)
(See paragraph 5.1. of the prEN 1073)

Att. 5.3 to PLA-5834 Page 4 of 9 ECEC 9610001 Page 4/9 2.1.1. Abrasion Resistance Test according to the Norm EN 530 - method 2 (abrasive paper 00). The classification is carried out according to the following diagram:
Class               Number of cycles 6                   > 2 000 cycles 5                   > 1500 cycles 4                   > 1 000 cycles 3                   > 500 cycles 2                   > 100 cycles 1                    > 10 cycles Results:          Class 6 for Ethyfuge 2000-24/100 mm thickness.
Class 6 for PVC.
.1.2. Flex cracking Resistance Test according to the Norm ISO 7854 - method B. The classification is carried out according to the following diagram:
Class               Number of cycles 6                  > 100 000 cycles 5                  > 40 000 cycles 4                  > 15 000 cycles 3                  > 5 000 cycles 2                  > 2 500 cycles I                  > 1 000 cycles This test is not applicable to suits for one single use only.
2.1.3. Puncture Resistance Test according to the Norm EN 863. The classification is carried out according to the following diagram:
Class                Puncture resistance 3                        > 100N 2                        > 50N I                        > 1ON Results:         Class I for Ethyfuge 2000 - 24/100 mm thickness.
Class 2 for PE cristal.

AUt. 5.3 to PLA-5834 Page 5 of 9 ECEC 96/0001 Page 5/9 2.1.4. Resistance in blocking Test according to the Norm ISO 5978. The classification is carried out according to the following diagram:
Class     l      Comments        l 2                non stick 1                 sticky This test is not applicable to non-coated materials.
2.1.5. Tear Resistance Test according to the Norm ISO 9073-4. The classification is according to the following diagram:
Class        Applied strength 6                > 150 N 5                >  80N 4                >  40N 3                >  20N 2                >  1ON I                >   2N Results:.        Class 4 for Ethyfuge 2000 - 24/100 mm thickness.
Class 3 for PE Cristal.
2.1.6.1Flammability of materials, visors, and ancillary parts Tests are carried out according to the Norms EN 1146 - single burner test (paragraph 7.5.3).
Results: Test requirements entirely fulfilled.
2.2. REQUIREMENTS FOR THE ACCESSORIES 2.2.1.Gloves The gloves set on the MTH2 ref. 841 442 T comply with the specific requirements for this type of Individual Protection Equipment, mainly to the Norm EN 421 Protective Gloves against ionizer radiation and radioactive contamination'.
They have Special EC Examination Certificates (ECEC) based on contracted tests.

AfU. 5.3 to PLA-5834 Page 6 of 9 ECEC 96 10001 Page 619 2.2.2.Boots The boots are part and parcel of the suit and are made of the same constituted material.
Consequently they comply with the requirements.
2.3. REQUIREMENTS FOR THE PROTECTIVE SUIT 2.3.1. Suit Design: Practical Performance Test The Practical Performance Test is carried out according to the prEN 1073 (paragraph 6.2.).
The conditioning is according to the manufacturer directions for use.
Parameters                                                       Valuations a) Harness comfort                                               Aimless b) Security of fastenings & couplings                            Good c) Accessibility of adjusting devices                            Good d) Clarity of vision through visor                               Good e) Suit comfort                                                  Good g) Other parameters                                              No particular notice 2.3.2. Fit Factor (paragraph 5.2.2. of the pr EN 1073)
The protection factor is determined according to the PrEN 944 standard (paragraph 8.9) by respecting the sequences Indicated in Annex A of the PrEN 1073.
The mean leakage value ( or inversely, the protection factor) enables a clothing classification according to the following table. The preconditioning according to the instructions for use recommendations.
Maximum accepted values, in %, of the ratio of the Ventilated                average Inward Leakage inside the hood, pressurised                    calculated on the whole lot of suits                   FIT FACTOR Suit classification          For One activity                 For all activities 5                      0.004                             0.002                      50 000 4                      0.010                             0.005                      20 000 3                      0.020                             0.010                      10 000 2                      0.040                             0.020                       5 000 I                     0.100                             0.050                       2000 Results: The suit is classified 5.
Frho  09    O   be "a on sore

Att. 5.3 to PLA-5834 Page 7 of 9 ECEC 9610001 Page 719 2.3.3.1.          Seams, Joins and Assemblages pull test resistance 2.3.3.1.         Seams / Welds (paragraph 5.2.3.1 of the pr EN 1073)
A sample of each type of seam/weld is tested according to the Norm ISO 5082 (annex 2).
The seam performance level is according to the following classification:
Class            Seam resistance (N) 5                 > 300 4                 > 125 3                  > 75 2                  > 50 1                  > 30 The tests have been applied to the following welds:
      -    Elbow and knee reinforcement
      -    Crotch assembly
      -    Belt assembly
      -    Booties assembly Results: All the welds are classified 3.
2.3.3.2.         Joins and Assemblages (paragraph 5.2.3.2. - prEN 1073)
This suit has no removable parts. This paragraph is aimless.
2.3.4             Gas tight (paragraph 5.2.4. of prEN 1073.
The test was carried out according to the EN 464 standard . The loss of pressure shall not be greater than 4 mbar in 6 minutes.
Results: Test not undertaken as the clothing is not considered as an gastight suit.
2.3.5.           Visors (paragraph 5.2.5. of prEN 1073)
The distortion of vision is measured, during the Practical Performance. The mechanical resistance test of the visor is according to the Norm EN 146 (paragraph 6.6 and 6.7.).
Results: Distortion of vision : Up to requirement.
Mechanical resistance: up to requirement.
Fn.c, -V.o   y&"
               -  b. W.d W1, dA

Att. 5.3 to PLA-5834 Page 8 of 9 ECEC 9610001 Page 8/9 2.3.6. Air supply system (paragraph 5.2.6. of the pr EN 1073)
The couplings and connections must comply with the requirements of the paragraphs 6.7.1.,
6.7.2., and 6.11.7. of the EN 270. The connection between the compressed air supply system and the suit must resist to a 250 N pull.
Result: requirement entirely fulfilled.
2.3.6. Breathing Hose (paragraph 5.2.7. of the pr EN 1073)
Tests are performed according to the EN 270 (paragraph 7.2. and 7.6). The pipes must not block the movements nor cause a rupture of the air supply during the Practical Performance Test.
Result: No constraint 2.3.7. Air supply flow rate (paragraph 5.2.8. of the PrEN 1073)
The test is carried out according to the PrEN 1073 standard (paragraph 6.3).
Result:
Minimal flow rate:30 m3 .h 1 (500 VmIn 1)              for a 6 Bar supply pressure Maximal flow rate:66 m3 .h 1 (1100 Vmin 1 )            for a 5.5 Bar supply pressure 2.3.8. Air flow rate warning device (paragraph 5.2.9. of the pr EN 1073)
If a warning is fitted, it must comply to the EN 270 (paragraph 6.13.3). The test must be carried out according to the EN 270 (paragraph 7.12). The sound level must be higher than 85 dB(A).
Result: Aimless (there is no sonic warning device).
2.3.9. Air supply valve (paragraph 5.2.10 of the pr EN 1073)
Where present, the control valve should enable a variation of flow rate between the minimum and maximum specified values without the possibility of closure.
Result: Requirements entirely fulfilled.
2.3.11.Exhaust devices (paragraph 5.2.11. of the pr EN 1073)
The exhaust devices must work correctly after the testing of the pressure in the suit, during the Practical Performance Test and during the determination of the Fit Factor. Test in accordance with the EN 1073 (paragraph 6.6.).
Results:           Good valves working.
Pull resistance superior to the fixed limit.
Fr ho Ago    Be bowd "- d a

Att. 5.3 to PLA-5834 Page 9 of 9 ECEC 961 0001 Page 9/9 2.3.12.Pressure In the suit During the activity sequence as specified, the overpressure shall not exceed 1000 Pa mean and 2000 Pa peak. A positive pressure shall be maintained.
Result: Requirements entirely fulfilled.
2.3.13.Carbon dioxide content of the Inhalation air The CO2 content of the inhalation air, determined at the minimum air flow rate, shall not exceed an average of I %(by volume), tested according to the EN 270 (paragraph 7.15).
Result: Requirement entirely fulfilled.
2.3.14. Noise associated with the air supply to the suit (paragraph 5.2.14 - pr EN 1073)
Test according to the EN 270 (paragraph 7.16). The noise measured In the suit at the ears shall not exceed 80 dB(A) at the maximum air flow rate as indicated by the manufacturer.
Result: Requirement entirely fulfilled.
: 3.      CHECKINGS 3.1. MARKING (paragraph 7 of the pr EN 1073)
The marking is satisfies the requirements of article 7 in the EN 340.
3.2. MANUFACTURER INFORMATION (Paragraph 8 of the pr 1073)
The manufacturers information complies with the specifications Inparagraph 8 of the EN 340.
They contain the Instructions for use, the usage conditions and the specific limits and restraints.
3.3. MAINTENANCE MARKING This is aimless, the suit being for one single use only.
: 4. CONCLUSIONS Upon presentation of the tests results, the Ventilated suit - pressurised for a single use only, MTH 2 - ref. 841 442 T is certified to ensure a protection against radioactive contamination according the following specified limits:
* Minimum air flow rate:           30 m3.h-1 (500 I.min ')
                  -      Maximum airflow rate:            66 m3.h-.(1100 .min")

Attachment 5.4 to PLA-5834 Protection Factor Determined During Fit Test Exercises For Mururoa V4 MTH2

Att. 5.4 to PLA-5834 Page 1 of 3 DPEA/STESR/CTHEN/02-642 Page h Test Results carried out on the full encapsulated suit MTH2 ref. 841442T For the EC Type Examination Certificate N00073/1 97/162/01/96/0001 You will find below the detailed results for this equipment in accordance with the Essential Requirements of the European Standard pr EN 1073-1 (revision Nov 1995). Other results that are not pointed out in this report are already written in the EC TYPE Examination certificate (dated December 10th 1997) 1 - Air Flow entering the suit when connected to a 6 bar feeding pressure (paragraph
.5.2.8. of the EC Tvpe Examination Certificate)
Suit      Entrance valve position       Air flow feeding pressure       air flow (m3/h /
number                                              Bar / psig                llmnl cfm) 1              Fully open                       5,5/ 77                 66/1100/ 38 1                Closed                         6,0 / 87                30 /500/ 17 2              Fully open                       5,5 / 77              65/1080 /37,8 2                closed                         6,0 / 87               31 /516 / 18 2 - Carbon dioxide content of the Inhalation air when measured at the minimum air flow (paragraph 5.2.13. of the EC Examination Type)
Suit          Feeding pressure                     Air flow             C02 contents(%)
number              Bar / psig                      M31h / cfm 1                 6/ 87                           30/17                      0,85 2                 6 /87                          31 / 18                     0,80 3 - Noise level associated with the air supply to the suit when tested at the maximum air flow rate (paragraph 5.2.14 of the EC Examination Type)
Suit          Feeding pressure                     Air flow           I Noise level (dB) number              Bar / psig                      M3/h; cfm 5,5/ 77                          66/ 38                     76,8 2                5,5/ 77                        65 /37,8                     78,5

Att. 5.4 to PLA-5834 Page 2 of 3 Page2/2 4 - Inward leakage average- Fit Factor measured at the minimal air flow of 4501/mn (paragraph 2.3.3. of the CE Examination Tvpe)
Suit nI 1                               2 Exercise Air flow m3lhl i/mn / cfm              30 / 500 / 17                   31 / 516 / 18 Standing still                    130 000                         130 000 Walking ( 5 km/h)                    59 500                          50 000 Moving arms up and down                   125 000                         125 000 above head Continuous squats                     65 000                          81 250 Bending forward                    100 000                          92 850 Person twisting at waist                 115 000                        130 000 Standing still                   130 000                         130 000 Average                        103 500                         103 440 5 - Pressure In the suit when measured at the maximum air flow when suit connected under 5,5 bar (77psig) feeding pressure (paragraph 4.12.of the EC Examination Type)
Suit n                       1                               2 Exercise                           P ave/ P min/ Pmax              P ave; P min, P Max.
daPa.                            daPa Standing still           40        -          -         38           -
Walking (5 km/h)            40       23        74         100          61         128 Moving arms up and down          40       17        62          46          18          72 above head Continuous squats            42        4        86          56           3         110 Bending forward            52        3        104         74           0         162 Person twisting at waist        38       18        58          46          20         110 Person crawling            37        -          -         40           -
For Information: Both overboots are breaked at the end of the test

Att. 5.4 to PLA-5834 Page 3 of 3 6 Over pressure and fit factor when person crawling on the floof as indicated in paragraph 4.12 and 5.2.2 of the pr EN 1073-1dated 1995 7 Screen:( paragraph 5.2.5)
  - Distortion of the vision: none
  - Mechanical resistance: no Incidence on the screen.

Attachment 5.5 to PLA-5834 Donning and Removal Instructions for Mururoa V4 MTH2

INDICE: e                                                                                          Att. 5.5 to PLA-5834 IVeM.T.H.2                                                      Page 1of 1 DATE: 12/00 PAGE : 1/1 INSTRUCTIONS FOR USE Preliminary remarks: This clothing is to be used under the authority of the person responsible for issuing the equipment for its dedicated use:
                    - the clothing offers the necessary protection for it's Intended use.
                    - Breathable air *network, hoses with connectors compatible with that of the clothing, are actually available on site and that they are capable of supplying a sufficient quantity of air:
minimum flow rate           500 liters/min. +/ 10% at 6 Bars ; (17 cfm at 85 psig) maximum flow rate          1100 liters/min. +/- 10% at 6 Bars ; (38cfm at 85 psig)
DRESSING
       - The wearer, with a helper, visually inspects the condition of the garment and its components, then removes the shipping protection (cardboard on the visor and Inside the garment, and removable plastic protection' from the visor).
       - He enters through the rear opening of the garment and Insures that his legs are in the garment.
       - Connects to the breathable air network by passing the supply line through the loop at the rear of the garment, at the same height as the supply valve.
       - Connects a communication device, if applicable, through the safety loop and communication loop and finishes dressing.
       - The helper zips up the dual zipper system and applies a large strip of adhesive tape to the upper extremity of the second zipper at the top to ensure air tightness. He then, ties the over boot laces around the ankles.
       - The wearer can control the air supply by turning the adjustment knob. The correct functioning of the supply flow valve and the over pressure valves can be verified by crouching down rapidly a few times.
       - He then Is free to enter the work zone.
UNDRESSING
       - Undressing may be done In the following manner. While the garment Is still being supplied with air, the helper pulls on the orange undressing strip, which runs from one wrist to the other over the hood. Once the undressing strip Is removed, the helper can split the suit shell by pulling on the hooded area and separating the suit Into two identical pieces. The helper rolls up the front and rear parts In a way that traps the contamination and avoids all contact with the wearer of the garment. (Please consult our video for detailed undressing techniques).
IMPORTANT
       - Leave the work zone immediately If the clothing deflates during the work phase evolution .If the helmet fogs, or if the person has a feeling of excessive warmth.
       - Remember that the clothing remains pressurised for a few minutes In case of an air supply failure STORAGE In the original packaging; out of the light; between + 50C and + 450C.( 410F and 1130F)
USAGE The air supply should be between + 150C and + 450C. ( 590 F and 11 30F)
EXPIRY DATE The clothing should be used by the third year from the date of manufacture.
CLEANING Not necessary for this type of equipment which is for a single use only.
EMERGENCY FEATURES
       - Air outside of the garment can be breathed by removing the safety strip at the front of the helmet/hood.
        -The undressing strip, removed by the wearer, enables the wearer to self escape t In less than 5 seconds.
* Breathable air: see the EN 132 standard.}}