View source for NRC 2004-0087, Supplement to Owner'S Inservice Inspection Summary Report Submitted for Point Beach Nuclear Plant Unit 1 Refueling Outage U1R27

{{Adams
| number = ML042530079
| issue date = 08/26/2004
| title = Supplement to Owner'S Inservice Inspection Summary Report Submitted for Point Beach Nuclear Plant Unit 1 Refueling Outage U1R27
| author name = Koehl D
| author affiliation = Nuclear Management Co, LLC
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000266
| license number = DPR-024
| contact person = 
| case reference number = NRC 2004-0087, U1R27
| document type = Letter type:NRC, Report, Miscellaneous
| page count = 4
}}

=Text=
{{#Wiki_filter:Nu Committed to Nuclear Excelln                                                  Point Beach Nuclear Plant Operated by Nuclear Management Company, LLC August 26, 2004                                                                         NRC 2004-0087 10 CFR 50.55a U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 Point Beach Nuclear Plant, Unit 1 Docket 50-266 License No. DPR-24 Supplement to Owner's Inservice Inspection Summary Report Submitted For Point Beach Nuclear Plant Unit I Refueling Outage U1 R27

==Reference:==
: 1) Letter from NMC to NRC dated January 17, 2003 (NRC 2003-0008)
In Reference 1, Nuclear Management Company, LLC, (NMC) submitted the Owner's Inservice Inspection Summary Report for Point Beach Nuclear Plant (PBNP) Unit 1 Fall 2002 refueling outage (U1 R27) in accordance with ASME Section Xl, Subsection IWA-6230.
During the PBNP U1R27 outage, some of the nozzles on the safety injection accumulator tanks, T-34A and T-34B, were removed as a result of ultrasonic examinations identifying indications on the inside surface. The specific aspects of the Repair/Replacements (R/R) were documented on Section Xl NIS-2 forms. However, a review of the NIS-2 form for the T-34A accumulator showed that the replaced 2-inch piping segment had not been included on the form.
Enclosure 1 to this letter contains a corrected NIS-2 for the Owner's Inservice Inspection Summary Report. This report is being resubmitted in accordance with ASME Section Xl, subsection IWA-6230 as required by the 1998 Edition with Addenda through 2000 of ASME Section Xl.
6590 Nuclear Road
* Two Rivers, Wisconsin 54241 0(-V Telephone: 920.755.2321

Document Control Desk Page 2 This letter contains no new commitments and no revisions to existing commitments.
I/
Dennis L. Koehl Site Vice President, Po&t Beach Nuclear Plant Nuclear Management Company, LLC Enclosure cc:      Administrator, Region 111, USNRC Project Manager, Point Beach Nuclear Plant, USNRC Resident Inspector, Point Beach Nuclear Plant, USNRC

ENCLOSURE I FORM NIS-2 OWNER'S REPORT FOR REPAIRIREPLACEMENT ACTIVITY CORRECTED COPY DATED AUGUST 16, 2004 2 pages follow

FORM NIS-2 OWNER'S REPORT FOR REPAIR/REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI                                               COPr
: 1. Owner         Nuclear Management Corporation                                      Date           August 16, 2004 700 First Street, Hudson, WI 54016                                  Sheet:         I       of 2
: 2. Plant      Point Beach Nuclear Plant                                           Unit:        I 6610 Nuclear Road, Two Rivers, WI 54241                             WO 0212624, 0212683, 0212695 Repair/Replacement Organization P.O. No., Job No. Etc.
: 3. Work Performed By:            Welding Services Inc.                            Type Code Symbol Stamp                 NR name 2225 Skyland Ct.                                 Authorization No.                      NR-69 Norcross, GA 30071                                Expiration Date                        11/07/2004 address
: 4. Identification of System:          Safety Injection West Spec G676262
: 5. (a) Applicable Construction Code Section J11, 19 65 Edition, No Addenda, No Code Case (b) Applicable Edition of Section XI Used for Repairs/Replacement Activity                                    1998 Ed. Addenda thru 2000 (c) Applicable Section XI Code Cases                     None
: 6. Identification of Components ASME National                                     arre Name of                Namc of               Manufacturer           Board            Other                 Year       Removed or       Stamped Component             Manufacturer                Serial No.           No.         Identification           Built        Installed     (Yes or No)
See page 2
: 7. Description of Work:          Modified nozzles to remove indications on the inside surface, replace piping on one nozzle.
: 8. Tests Conducted: Hydrostatic a                        Pneumatic El                 Nominal Operating Pressure ED Exempt                     El Other        E               Pressure 735n2/2                      psi Test Temp. Ambient                        0F System Leakage Test
: 9. Remarks RR 2002-0094, 2002-0100, 2002-0102, 2002-0105 Applicable Manufacturers Data Reports to be attached CERTIFICATE OF COMPLIANCE I certify that the statements made in the report are correct and that this conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.                                     Expiration Date N/A Signed       ;                                                                  ISI Coordinator Date                  r/       9CIOV
                                                                                                                                    /
Owner or Owner's Designee, Title                                                                7    I CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Wisconsin and employed by HSBCT have inspected the components described in this Owner's Report during the period September 26. 2002 to October 31. 2002, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of ASME Code, Section XI.
By signing this certificate, neither the Inspector nor his employer makes any waarranty, expressed or implied, concerning the examinations and corrective measures described in this Ouvner's Report. Furthermore, neither the Inspector nor his employer,711 be liable in any manner for any personal injury or property damage or a loss of any kind                     Coecn d with this inspection.
kd                                   ACommissions                          WVI-247972
           /fnsptior's Signature                                                         National Board. State, Province, and Endorsements PBF-7050 Revision 2 12/02/02                                                                                                                            SEM 7.11.1}}