View source for NL-06-1766, Unit 1, Inservice Inspection Summary Report

{{Adams
| number = ML062290483
| issue date = 08/17/2006
| title = Unit 1, Inservice Inspection Summary Report
| author name = Sumner H
| author affiliation = Southern Nuclear Operating Co, Inc
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000348
| license number = NPF-002
| contact person = 
| case reference number = NL-06-1766
| document type = Inservice/Preservice Inspection and Test Report, Letter type:NL
| page count = 123
}}

=Text=
{{#Wiki_filter:H. L. Sumner. Jr.         Southern Nuclear Vice Pres~dent            Operating Company, Inc.
40 lnverness Center Parkway Pr~stOffice Box 1295 B rmingharn, Alabarna 35201 SOUTHERN COMPANY August 17, 2006                                                          Energy to Serve Your WorldSM Docket No.: 50-348 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, D. C. 20555-000 1 Joseph M. Farley Nuclear Plant - Unit 1 Inservice Inspection Summary Report Ladies and Gentlemen:
Southern Nuclear Operating Company (SNC) submits herewith the Farley IVuclear Plant (FNP) Unit 1, Interval 3, Period 3, Outage 2 Inservice Inspection Summary Report (Enclosure). This report describes and summarizes the inservice inspection activities performed during the Unit 1 Spring 2006 maintenancelrefueling outage. Paragraph IWA-6230 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, 1989 Edition requires submittal of the enclosed report. Also included in the report are inspection results required by Farley Nuclear Plant Technical Specification 5.6.10.
This letter contains no NRC commitments. If you have any questions, please advise.
Sincerely, H. L. Surnner, Jr.

==Enclosure:==
FNP Interval 3, Period 3, Outage 2 Inservice Inspection Report Tabs A, B, C, and D

U. S. Nuclear Regulatory Commission NL-06-1766 Page 2 cc:   Southern Nuclear Operating, Company Mr. J. T. Gasser, Jr., Executive Vice President         (W/OEnclosure)
Mr. J. R. Johnson, General Manager - Plant Farley       (W/OEnclosure)
RTYPE: CFA04.054, LC# 14472 U. S. Nuclear Regulatory Commission Dr. W. D. Travers, Regional Administrator               (W/OEnclosure)
Mr. R. E. Martin, NRR Project Manager - Farley          (W/OEnclosure)
Mr. C. A. Patterson, Senior Resident Inspector - Farley (w/o Enclosure)

Joseph M. Farley Nuclear Plant - Unit 1 Inservice Inspection Summary Report Enclosure FNP Interval 3, Period 3, Outage 2 Inservice Inspection Report Tabs A, B, C, and D

INSERVICE INSPECTION REPORT Date of Document Completion: August 7,2006 REFUELING 20 INTERVAL 3 PERIOD 3 OUTAGE 2 J. M. FARLEY UNIT I NUCLEAR GENERATING PLANT COLUMBIA, ALABAMA 36319 Commercial Service Date: December 1,1977 Southern Nuclear Operating Company 42 lnverness Parkway Birmingham, Alabama 35242 (as agent for Alabama Power Co.)

INDEX SECTION                                                       -
TAB VOLUME 1 FORM NIS-I OWNER'S REPORT FOR INSERVlCE INSPECTION BALANCE O F PLANTIREACTOR VESSEL EXAMINA'TiON 

==SUMMARY==

EXAMINATION PROGRAM PLAN FORM NIS-2 OWNER'S REPORTS FOR REPAIRS AND REPLACEMENTS VOLUME 2 EXAMINATION RESULTS VOLUME 3 ADDITIONAL EXAMINATIONS INDICATIONS PERSONNEL, EQUIPMENT, MATERIAL, & CALiBRATlON BLOCK CERTIFICATIONS EXAMINATION PROCEDURES REACTOR VESSEL INSPECTION T O O L DATA AND KESULTS CLASS 3 SUPPORTS VOLUME 1 CONTAINS T H E INFORMATION T O MEET THE REQUIREMENTS O F ASME CODE 1989 EDITION, SECTION XI, SUBSECTION IWA-6230 F O R SUBMITTAL O F A SUhlMARY REPORT T O T H E NRC FOLLOWING EACH REFUELING OUTAGE.
VOLUMES 2 and 3 CONTAINS T H E SUPPORTING DOCUMENTATION FOR T H E EXAMINATIONS PERFORMED AND W I L L BE RETAINED ON SITE BY FNP.

TAB A Form NIS- 1 Owner's Report for Inservice Inspection

Page 1 of 4 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As required by the Provisions of the ASME Code Rules
: 1.        Owner Southern Nuclear Operating Company (as anent for Alabama Power Co.)
42 Invemess Center Parkway Birmingham. AL. 35242
: 2.         Plant       J. M. Farlev Nuclear Plant (Name and Address of Plant)
H w 95 South Columbia. AL. 363 19
: 3.         Plant Unit 1
: 4.         Owner Certificate of Authorization (if required)                     N/A
: 5.         Commercial Service Date 1210 1/77
: 6.         National Board Number for Unit See Listed N. B. for each component
: 7.         Components Inspected Manufacturer Component o r                 Manufacturer                 or Installer                State or                      National Appurtenance                   o r Installer                Serial No.             Province No.                    Board No.
Reactor Vessel             Mitsubishi Heavy                B-VH-NO4                      NIA                            5846 Closure Head                Industries, Ltd.
Reactor Vessel                 Combustion                      69104                     NIA                           21385 Engineering Reactor Coolant                   Southwest                       N/A                      N/A                             N/A Piping                     Fabricating Reactor Coolant                 Westinghouse                 RCPCPI-1                      N/ A                            N/A Pumps A, B & C                       EMD                     RCPCP1-2 RCPCPI-3 Pressurizer                 Westinghouse                      1431                     N/A                          68-103 Tampa Class 1 Piping                    Daniel                        N/A                      N/A                             N/A Construction Class 2 Piping                    Daniel                        N/A                      NIA                             N/A Construction Steam Generator                 Westinghouse                ALAD-40304                     N/A                              70 A,B&C                        Pensacola                 ALAD-40305                                                      71 ALAD-40306                                                      72
: 8.        Examination Dates 11/14/04 to 05/22/06
: 9.        Inspection Period Identification: Third Period                       08101104 to 12/01/07
: 10.       Inspection Interval Identification: Third Interval                   12/01/97 to 12/01/07
: 11.       Applicable Edition of Section XI                 1989     Addenda        None
: 12.       DateIRevision of Inspection Plan:               FNP-1-M-097; 08/03/06: Revision 6.1
: 13.       Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. See Tabs B and C
: 14.       Abstract of Results of Examinations and Tests. See Tab B
: 15.        Abstract of Corrective Measures. See Tab B Note: Supplemental sheets in the form of lists, sketches, or drawings may be used, prov~ded( 1 ) size is 8 112 in. x 1 1 in., (2) information in jtems I through 6 on this report is included on each sheet, and (3) ench sheet is numbered and the number of sheets is recorded at the top of this form.

Page 2 of 4 FORM NIS-1 We certify that: a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code. Section XI.
Certificate of Authorization No. (if applicable)        N/A     Expiration Date             N/A Date  A7.7 20 06            Signed Southern Nuekrr Ooerrtine Co.
BY (Owner)
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of      R   /         and employed by HSB-CT of Hartford, Connecticu inspected the components described in this Owner's Report during the period        /l//&f-         to O$/Z and state that to the best of my knowledge and belief, the Owner has performed8exa&inations and tesdand'taken corrective measures described in this Owner's Report in accordance with the Inspection Plan and as required by the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions       R//7F7              &U//
National Board, State, Province, and Endorsements
                          -?t w Lr          20Ub

Page 3 of 4 OWNER'S REPORT FOR INSERVICE INSPECTION DATE:
OWNER NAME AND ADDRESS:                     Southern Nuclear Operating Company 42 lnvemess Center Parkway Birmingham, AL. 35242 (as agent for Alabama Power Co.)
NAME AND ADDRESS OF NUCLEAR GENERATING PLANT:                  Joseph M. Farley Nuclear Plant Highway 95 South Columbia, Alabama 363 19 NAME ASSIGNED TO NUCLEAR POWER UNIT:                                Joseph M. Farley Nuclear Plant Unit 1 OWNER CERTIFICATE OF AUTHORIZATION:
COMMERCIAL SERVICE DATE:                   December 1, 1977 NATIONAL BOARD NUMBER:                     See listed NB's for each component NAME OF COLMPONENTSOR PARTS OF COMPONENTS INVOLVED:                       Representative samples of the following components and systems were examined using nondestructive examination techniques.
CLASS I COMPONENT OR SYSTEM                       SYSTEM DESlGNATION Reactor Coolant System              B13 Steam Generator                     B2 1 Pressurizer                         8 31 RHR                                 Ell Safety Injection System             E2 1

Page 4 of 4 CLASS 2 COMPONENT OR SYSTEM               SYSTEM DESIGNATION Steam Generator             B2 1 RHR System                  El 1 CVCS                        E2 1 Main Steam System           N11 Feedwater System            N2 1 VT-2 EXAMS FOR RISK-INFORMED COMPONENT OR SYSTEM                    SYSTEM               RI SEGMENT NUMBERS DESIGNATION RCS                              B13                 1RC-0 12A, 1RC-0 1 2 8 , l RC-0 17, 1RC-0 IgA, 1RC-01SB, 1RC-0 18C, 1RC-020A, 1 RC-020B, 1RC-020C, 1RC-026C. 1RC-032A, 1RC-032l3, 1RC-032C, 1 RC-036A, 1RC-036B.
1RC-036C, IRC-04 I A, IRC-054           -
HYDROSTATIC TESTING:              SEE TAB B NAME AND ADDRESS OF MANUFACTURER OR INSTALLER OF COMPONENTS:
STEAM GENERATOR                                PRESSURIZER Westinghouse Electric Corporation              Westinghouse Electric Corporation Pensacola Plant No. 5                          Tampa Division Pensacola, Florida                             Tampa, Florida CLASS 1 & 2 PIPING Daniel Construction Co.
Greenville, South Carolina INSERVICE INSPECTION DATES:
NAME OF AUTHORIZED NUCLEAR INSERVICE INSPECTOR:                                 James Haubrich NAME AND MAILING ADDRESS OF INSPECTOR'S EMPLOYER:                             Hartford Steam Boiler Inspection and insurance Company of Connecticut One State Street Hartford, CT 06 I 03 ABSTRACT:                                            SEE TABS B AND C

TAB B Balance of Plant 1 Reactor Vessel Examination Summary

J. M. FARLEY NUCLEAR PLANT UNIT NO 1 INTERVAL 3 PERIOD 3 OUTAGE 1 BALANCE OF PLANTfREACTOR VESSEL EXAMlNATION 

==SUMMARY==

INTRODUCTION An Inservice examination of Class 1 and 2 components and piping systems was conducted at Farley Nuclear Plant (FNP) Unit 1 during April-May 2006. The examinations were performed in accordance with the approved Examination Program Plan. The primary areas of examination included Pressurizer, Steam Generator C, Main Steam, Safety Injection and Residual Heat RemovaVChemical and Volume Control Piping and supports. The tables documenting the Class 1 and 2 vessel and piping examinations as well as component supports examined are under Tab C of this report.
The program utilized volumetric, surface and visual nondestructive testing methods in accordance with the requirements of ASME Section XI, 1989 Edition.
Selected examinations and related activities were witnessed by representatives of Southern Nuclear Operating Company and its Authorized Inspection Agency. All examinations were performed to the extent practical within geometric and physical limitations.
RESULTS Examinations were performed in accordance with the ASME Section XI Code with the recording of indications meeting the specified ASME Acceptance Standards. The results are summarized below and detailed tables are shown behind Tab C. Indications were evaluated and dispositioned by Indication Evaluation Reports (IER's). A listing of IER's is attached and the data sheets are available at FNP for review.

==SUMMARY==
OF INDICATIONS CLASS 1 (A)       VOLUMETRIC EXAMINATIONS There were no reportable Class I Volumetric indications (B)       SURFACE EXAMINATIONS There were no reportable Class 1 Surface indications.
(C)       VISUAL EXAMINATIONS There were four piping supports that were acceptable per evaluation with three of those having bolting or nuts tightened and one having spring cans reset to match revised drawing settings. There were thirty bolted connections from the Class 1 pressure tests with various degrees of boron accumulation. In each case the boron was removed, any necessary corrective action was performed and either an evaluation or a re-examination found each one acceptable.
Vol 1 Tab B Summary Narrative.DOC                Page 1 of 4

CLASS 2 (A)     VOLUMETRIC EXAMINATIONS There was one Class 2 Volumetric indication consisting of a lamination in the base metal adjacent to a main steam piping weld that was acceptable per Section XI tables.
(B)     SURFACE EXAM INATIONS There were no reportable Class 2 Surface indications.
(C)     VISUAL EXAMINATIONS There were no reportable Class 2 Visual indications associated with piping supports.
IWEOWL EXAMINATIONS An examination of the Unit 1 Containment Building concrete was completed in February 2006 and found to be acceptable. In addition, a physical examination of the Unit I Containment Building unbounded post tensioning system was performed during February and March 2006. The tendon sample consisted of three hoop, three dome and three vertical tendons. The sheathing filler material for each tendon was sampled and showed no signs of fiee water. In addition, the chemical analysis revealed there was no chemically combined water in excess of 10% by weight in any sample. The absolute difference between the amount of filler removed and that replaced never exceeded 10% of the net duct volume.
There was no evidence of excessive grease leakage and no signs of abnormal corrosion for these tendons. Visual inspection of the containment concrete revealed no evidence of any abnormal structural degradation. A visual examination of all accessible grease caps revealed no indication of grease cap deformation. The complete inspection report is available at FNP for review.
Portions of the Unit I Containment Moisture Bamer were replaced in April 2006. As required, the Containment Liner Plate was inspected below the location where the Moisture Barrier was removed and found to be acceptable.
Vol 1 Tab B Summary Narrative.DOC              Page 2 of 4

ADDITIONAL EXAMINATIONS Results from additional examinations which were performed during this outage are as follows:
Class 1 System Leakage Test In accordance with ASME Section XI 1989 Edition IWB-5210(a)(l), leak testing of the Class 1 Reactor Coolant System Pressure Boundary was performed prior to startup following the 20th refueling outage. The testing was completed on 05122106. A copy of the completed test procedure FNP-I-SOP- I .4 is retained by the Farley Nuclear Plant Document Control.
In addition, to meet the 1989 Section XI IWA-5242(a) requirement for removal of insulation From bolted connections in "systems borated for the purpose of controlling reactivity" the alternative examination requirements of Relief Request RR-27 was used. RR-27 allowed the insulation to be removed and the bolted connection to be examined for evidence of leakage at static conditions. If evidence of leakage affecting the bolting was apparent, the bolting was removed and examined per IWA-5250(a)(2) and Relief Request RR-41. The class I leakage test was performed and the Code requirements were satisfied.
Class 1 and 2 Hydrotesting No hydrostatic testing was performed during the 20th refueling outage to meet requirements of the current inspection interval.
Class 2 Functionalllnservice Testing Class 2 functional testing performed during the 20th refueling outage included portions of the RHR, Containment Spray, Safety Injection and Charging systems. There were eight bolted connections associated with the Class 2 pressure tests with leakage and various degrees of boron accumulation. Other packing and stem leaks were also observed. The boron accumulation was removed and either an evaluation or a re-examination found each one acceptable. Completed data sheets from FNP- I -STP- 156.1 are filed in FNP Document Control. The Class 2 functional 1 inservice tests were performed and the code requirements were satisfied.
STATUS OF EXAMINATIONS REQUIRED FOR CURRENT INTERVAL This refueling was the 2nd outage, 3rd period of the 3rd interval and the examinations completed are within ASME Code compliance.
Vol I Tab B Summary Narrative.DOC                Page 3 of 4

STEAM GENERATOR EDDY-CURRENT EXAMINATION 

==SUMMARY==

Eddy current examination of the lA, I B, and IC Model 54F Steam Generators (SG) was performed during UI R20.
The inspection scope for all three SGs was:
50% full length bobbin 20% hot leg top of tubesheet plus point 50% low row U-bend plus point Plus point of dentsidings >= 2 volts, Plus point of location of loose objects identified during U1 R 18 and U I R19 Plus point of additional tubes at locations corresponding to foreign objects identified during in-bundle visual inspection prior to ECT during this outage (U 1R20).
No indications of wear or corrosion-induced degradation were observed. No crack-like indications were identified.
No challenges to tube integrity were identified by the results of the U1R20 eddy current inspections, and no tube leakage was observed during Cycle 20 operation.
There were no tubes plugged during this inspection outage. Additionally, there are no plugged tubes in SG 1A, 18.
or 1C.
The FNP 1R20 Final Condition Monitoring and Operational Assessment (CMOA) demonstrates that the 1R20 SG eddy current inspection results provide assurance that the Unit 1 SG tube integrity will be maintained to support operation through the upcoming inspection intervals.
Vol I Tab B Steam Generator Narrative. DOC             Page 4 of 4

ALA

==SUMMARY==
OF RECORDED INDICATIONS 2006 UNIT 1 RFZO ITEM                 INDICATION              ACCEPTED PER                     IER SKETCH          ID         DESCRIPTION                DESCRIPTION             EV.+LUATIOY REPAIRIREPL MoNrrOH NUMBER ALAI -4502 RC-R220     Spring Can              Settings did not match drawing      X                             00 1 ALAI-4303  SI-R140     Sway Strut              Anchor bolts not fully engaged      X                             002 Loose bolls on reservoir, thread engagement not visible ALA1-4302  Si-K129     Hydraulic Snubber       in inspection hole                  X                             003 ALA2-4300   14-RI      Pipe to Penetration     Lamination in base metal            X                            004 Loose nut on the bottom of the ALA1-4207  CVCS-R505   Sway Strut              load stud                           X                            005 Pressure Test 160.1- 1, Evidence of Leakage and h'A     NA          160.22-1, and 160.23-1  Boron Accumulation                                        X      006 Vol 1 Tab B IER Summary List.DOC

TAB C Examination Program Plan

EXAMINATION PROGRAM PLAN UNIT 1 RF 20 INTERVAL 3 PERIOD 3 OUTAGE 2 2006

Farley Unit 1Refueling Outage 20 Inservice Inspection Report Interval 3, Period 3,1FR20 Exam Cat.          Component        Component Description           Procedure I Method  Report No. Results Remarks Item No.
B-B 18.211        ALA1-21004        PZR B O T O M HEAD TO LOWER      FNP-0-NDE-100.34  S06F1U0014   NRI SHELL                                   UT SO6FlUOO15   NRI NRI NRI NRI B-B 162.12                          PZR LOWER SHELL LONG SEAM        FNP-0-NDE-100.34  S06FlU0019    NRI UT S06F1U0020    NRI NRI NRI B-G-2 187.30    ALA1-3300-NO1 - N32  STEAM GEN. NUTS                    NMP-ES-024-201                Sat VT- 1 B-G-2 IB7.30    ALA1-3300-SO1 - S32  STEAM GEN. STUDS                   NMP-ES-024-201                Sat VT-1 BG-2 IB7.50      ALA14303-FLG-1      FLANGE BOLTING                     NMP-ES-024-201                Sat VT-1 B-G-2 187.50     ALA14501-FLG-1      FLANGE BOLTING                     NMP-ES-024-201                Sat VT- 1 B-G-2 187.50     ALAl-4502-FLG-1     FLANGE BOLTING                    FNP-0-NDE-100.21               Sat VT- 1 B-G-2 187.50     ALA14503-FLG-1      FLANGE BOLTING                     NMP-ES-024-201                Sat VT- 1 B-G2 187.70    ALAl-4501-QV03lA (B)  VALVE BOLTING                      NMP-ES-024-201                Sat VT- 1 B-K 1810.20  ALAI-4207-CVCS-R505 (W) WELDED ATACHMENT                   NMP-ES-024-301                NRI PT Page 1 of 6

Farley Unit 1Refueling Outage 20 lnsewice Inspection Report Interval 3, Period 3 , l FR20 Exam Cat.         Component        Component Description           Procedure I Method  Report No. Results Remarks Item No.
B-K 1810.20 ALAI-4207-CVCS-R512 (W) WELDED ATTACHMENT                NMP-ES-024-301    S06F1PO017   NRI PT B-K 1810.20  ALA1-4303-SI-R134 (W4) WELDED ATTACHMENT                NMP-ES-024-301    S06F1PO005    NRI PT B K 1810.20  ALA1-4502-RC-R220 (W4) WELDED ATTACHMENT                NMP-ES-024-301    S06F1PO006    NRI PT C-A 1 1.20       ALA2-3300-6R      ELLIPTICAL HEAD TO UPPER SHELL FNP-0-NDE-100.34    S06FlU0042    NRI UT S06F1U0043    NRI NRI NRI AM-3300-8R        FEEDWATER NOZZLE TO SHELL         NMP-ES-024-401   S06FlM0001    NRI WELD                                    MT FNP-0-NDE-100.34  S06FlM0003    NRI UT S06F1U0023    NRI NRI NRI C-B 12.22      ALA2-3300-IR8R     FEEDWATER NOZZLE INNER           FNP-0-NDE-100.49  S06F1U0024    NRI RADIUS                                  UT S06F1U0025    NRI NRI NRI NRI Page 2 of 6

Farley Unit 1Refueling Outage 20 Inservice lnspection Report Interval 3, Period 3,1FR20 Exam Cat.        Component         Component Description           Procedure I Method  Report No. Results          Remarks Item No.
C-C 13.20  ALA2-4300-MS5-HI 8 (W8) WELDED ATTACHMENT                NMP-ES-024-401    S06F1MOO02    NRI MT C-C / 3.20 ALA2-4612-SI-R273 (WS)  WELDED ATTACHMENT                NMP-ES-024-301    S06F1PO010    NRI PT F-A / 1.10    ALAl-420SRC-H38      SPRING CAN                       NMP-ES-024-203    S06FlV0012    Sat VT-3 F-A / 1.10    ALA1-4205RGR15       TWO DIRECTIONAL RESTRAINT        NMP-ES-024-203    S06FlV0013    Sat VT-3 ALA1-4207-CVCS-R505    SWAY STRUT (2) WlATTACH          NMP-ES-024-203    S06FlV0038   Unsat VT-3 SO6FlVOO50    Sat ONE DIRECTIONAL RESTRAINT         NMP-ES-024-203   S06FlV0048    Sat WIATTACH                               VT-3 ANCHOR 2 U-BOLTS                  NMP-ES-024-203   S06F1V0030     Sat VT-3 SPRING CAN                        NMP-ES-024-203   S06FlV0025     Sat VT-3 HYDRAULIC SNUBBER                                               Reject Accept F-A/ 1.10                         SWAY STRUT (2) WIATTACH                                           Sat F-A/ 1.10                         SWAY STRUT                                                       Unsat Acceptable by evaluation (See IER #002)
F-A1 1.10                         ONE DIRECTIONAL RESTRAINT                                         Sat WIATTACH F-A/ 1.10                         ONE DIRECTIONAL RESTRAINT                                         Sat WlATTACH F-A1 1.10                         SWAY STRUT                                                        Sat F-A 11.10                         HYDRAULIC SNUBBER                                               Accept Page 3 of 6

Farley Unit 1Refueling Outage 20 Inservice Inspection Report Interval 3, Period 3,1 FR20 Exam Cat.       Component      Component Description           Procedure I Method Report No. Results Remarks Item No.
F-A1 1.10   ALA1-4308-SS-1998  TWO DIRECTIONAL RESTRAINT                                       Sat ALA1-4308-SS-2000  ONE DIRECTIONAL RESTRAINT                                       Sat F-A 11.10    ALAl-4500-RC-R1   SPRING CAN (2)                                                Accept ALAl-4502-RC-R220  SPRING CAN WIATTACH                                             NA Sat F-A1l.10    ALAl -4505-88-2009 ONE DIRECTIONAL RESTRAINT                                       Sat F-A1l.10    ALA1-4505-SS-20 17 ANCHOR 2 U-BOLTS                                                Sat F-A1l.10    ALAl -4505-SS-2020 TWO DIRECTIONAL RESTRAINT                                       Sat F-A1 1.10   ALAl -4505-SS-2027 TWO DIRECTIONAL RESTRAINT                                       Sat F-A1 1.10   ALAl-4505-SS-2029  ONE DIRECTIONAL RESTRAINT                                       Sat F-A 1 1.20  ALA2-4300-MS5-H18  SPRING CAN (2) WIATTACH                                         Sat F-A 1 1.20  ALA2-4612-SI-R273 3 DIRECTIONAL RESTRAINT                                         Sat WIATTACH F-A 1 1.40   ALAI -2100-CS-1  PRESSURUER SKIRT QlB31 KO01                                     Sat R-A1l.ll      ALA1-4301-6-RI   PIPE TO ELBOW                                                   NRI NRI REDUCER TO ELBOW                                                NRI NRI Page 4 of 6

Farley Unit IRefueling Outage 20 Inservice Inspection Report Interval 3, Period 3,lFRZO Exam Cat. Component      Component Description          Procedure I Method  Report No. Results Remarks Item No.
R-A1 1.11  ALA2-4300-14-RI  PIPE TO PENETRATION              NMP-ES-024-502   S06F1U0039    RI UT S06F1U0040   NRI NRI R-A 11.1 1 ALA2-4350-25-RI  REDUCER TO ELBOW                                                NRI R-A/ 1.11   ALA2-4350-4-RI  PIPE TO PENETRATION                                             NRI NRI GEO ALA245 14-30-RI  PIPE TO ELBOW                                                   NRI ALA2-4514-8-RI  PIPE TO TEE                                                     NRI ALA2-45 16-28-Rl ELBOW TO PIPE                                                   NRI NRI ALA2-4540-1O-RI  PIPE TO ELBOW                                                   NRI NRI ALA2-4540-32-RI  VALVE TO PIPE                                                   NRI NRI NRI ALA24540-36-RI   ELBOW TO PIPE                                                   NRI Page 5 of 6

Farley Unit 1Refueling Outage 20 lnservice Inspection Report Interval 3, Period 3, 1FR20 Exam Cat.           Component       Component Description          Procedure I Method  Report No. Results Remarks Item No.
R-A 1 1. I 1      ALA2-4540-36-RI   ELBOW TO PIPE                    NMP-ES-024-501   S05F1U0007   NRI UT R-A 1 1.1 1  VT-2 FOR RISK INFORMED VT-2 OF SMALL BORE LINES OF RI   NMP-ES-024-202 SEGMENTS                               VT-2 R-AI1.11H          ALA1-4304-5-RI   PIPE TO ELBOW                    NMP-ES-024-501   S06F1U0031   NRI UT S06F1U0032    NRI ALAI-4305-3-RI   PIPE TO ELBOW                                                   NRI NRI A M 1-4307-5-Rl  ELBOW TO PIPE                                                   NRI A M 1 -4310-2-RI PIPE TO ELBOW                                                   NRI Page 6 of 6

TAB D Form NIS-2 Owner's Reports for Repairs and Replacements

Class 1 Form NIS-2 Owner's Report for Repairs or Replacements                                                                         ItType : ~ 1.52 As required by the pronsiolis of the ASME Code Section XI Job Number                          f                        I
: 1. Owner                                               2. Plant I       B13-1051234901                   Sheet Unit I  of 2 Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                        FNP     I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                           Date (as agent for Alabama Power Company) 04/27/06
: 3. Work performed by                                                              Type Code Symbol Stamp N iA Name : Southern Nuclear Operating Company Maintenance Dcpartment Authorization Number Address :          J o s e ~ hM. Farley Nuclear Plant                      Expiration Date I
4, Identification of System PIPING & INSTR I(a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19 -  89 Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:
NIA Addenda.
Addenda,            N/A Code Case Code Case I
Name of            Name of              Manufacturer        National         Other          Year         Repaired,               ASME Component         Manufacturer           Serial Number         Board       Identification     Built     Replaced, o r               Code No.                                     Replacement               Stamped (Yes / No)
HYD.SNUBBER           GRlNNELL                  12666            N!A           FNP-222          I OSO       IIEPI,AC'EL)               NO HYD.SNUUBER          GRINNELL                  20732T            N!A             10326          1083    IIIiI'i..f\C'EMEN~l~           NC)
: 7. Description of Work REPLACEMENT SNUBBER RCR226 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NliMBEK ')0)47 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
  . Test Conducted Hydrostatic         Pneumatic          Normal Operating Pressure      None         Other Pressure              PSI 'Temperature             "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType : L1.52 As required by the provisions of the ASME Code Sectlon XI Job Number                        I                     I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I          B13-1051234901 Sheet 2 of 2 SUPPORTS BlJll,'S TO AISC-1969 AND WEL.DED TO AWS Dl 1-86 Certificate of Compliance We certify that the statements made in the report are corrcct and this                 replacement                 conforms to the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 N/A 1
Certificate of Authorization Numbcr                            N/A                        Expiration Date                     N/A Signed                                                                Maintenance Manager       Datc    7//9/d      6' Owner or Owner's Desimee. Titlc I   I, the undersigned, holding a Certificate of Inservice Inspection commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                     and employed by                  fl5                                                     of have inspected the components described
-ngir                                 the period                     ,-6                to to the best of my knowledge and belief, the Owner has &-formedexamination Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing <his certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the ~nspectornor his eniployer shall be liable in any manner for any personal in-jury or property damage or loss of any kind arising from or connected with this inspection.
Commissions      R/ f K 7                 AN/ /
National Board, State, Piovince. and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                 RTYF :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                  I                      I
: 1. Owner                                               2. Plant I       B13-1051238601 Sheet 1 of 2 Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                FNP    1 Birmingham, Alabama 35242                                     Columbia, Alabama 36319                    Date (as agent for Alabama Power Company)                                                                           04/27/06
: 3. Work performed by Name : Southern Nuclear Owratine Corn~anvMllinlenance Department I Type Code Symbol Stamp Authorization Number N/A Address :          Joseph M. Farlev Nuclear Plant                           Expiration Date I
: 4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I
(a) Applicable Construction Code:            SEE NOTE            19 - Edition                       Addenda,            Code Case (b) Applicable Section Xi Utilized For Repairs Or Replacements,  19 89 Edition            NIA       Addenda,    N/A     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of             Manufacturer         National          Other          Year      Repaired,        ASME Component         Manufacturer          Serial Number          Board        Identification     Built   Replaced, or        Code No.                                    Replacement       Stamped (Yes I No)
MECH               PACLFIC                  26139            N/A            QP-1301          1982     REPLACED           NO SNUBBER            SCIENTIFIC HYD SNUBBEK             LISEGA               30500420/011         NIA           QP050939         2004   REPLACEMENT           NO
: 7. Description of Work SNUBBER SS-2744 WAS REPLACED AS A SCHEDULED UPGRADE. REF: TRANSACTION NUMBER 90886 VT-3 PERFORMED ON REPLACEMENT SNUBBER
    . Test Conducted I           Hydrostatic         Pneumatic          Normal Operating Pressure       None         Other I           Pressure              PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                   RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number B13-1051238601                 Sheet 2 of 2
: 9. Remarks (Applicable lbfanufacturer's Data Reports to be attached)
SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl .I-86.
REFERENCE EQUIVALENCY DETERMINATION (LED) 96-04225. REV. I Certificate of Compliance We certify that the statements made in the report are correct and this                 replacemcnl                    conforms to the rules of the ASME Code. Section XI.                                                          repair or replaccment Type Code Symbol Stamp                                                                 NI A 1 Certiiica? of Authorization Kumber                             KIA                       Expiration Date                       NIA                   1 Signed Owner or Owner's Designee, Titlc Maintenance Manager       Date      7 f YI~'      6 Certificate of Inservice Inspection I, the undersigned, holdin       alid commission issued by the National Board of Boiler and Pressurc Vessel lnspcctors and the State or Province of                                     and employed by                    n'Sk5-c~                                                    of
                &.ART-              , 6.7-                                                           have inspected thc components described in this Owner's Report during rhe period                   p/           6          to               @ , -6                         , and state that to thc best of my knowledge and belief, the Owner has &rformcd examinations                        c o d c t i v e measurcs described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning thc examinations and corrective rneasures described in this Owner's Report. Furtherrnorc, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damagc or loss of any kind arising from or connected with this inspection.
Cvmrnissions                          AN//
National Board, stalk, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                   RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number                I                     I I                                                                                      I       831 - 1041974401       Sheet 1 of    2
: 1. Owner                                               2. Plant                                                  Unit Southern Nuclear Operating Company                                Farley Nuclear Plant 40 Inverness Center Parkway                                       Highway 95 South                             FNP    I L
Birmingham, Alabama 35242                                         Columbia, Alabama 36319                 Date (as agent for Alabama Power Company)
June 1,2006 I
: 3. Work performed by                                                                Type Code Symbol Stamp NIA Name : Southern Nuclear opera tin^ Comaany Maintenance De~artment NIA Address :            Joseph M. Farlev Nuclear Plant                            Expiration Date N/A I
: 4. Identification of System Pressuriz,er System I  (a) Applicable Construction Code:         ASME Section 111, (b) Applicable Section XI Utilized For Repairs Or Replacements,
     /-
19 19
                                                                            - 71 Edition 89 Edition
: 6. Identification of Components Repaired o r Replaced end Replacement Components:
Winter 1972 N/A Addenda.
Addenda,   / A Code Case Code Case I
: 8. Test Conducted                                                                                                                   I 1            Hydrostatic         Pneumatic           Normal Operating Pressure        None          Other I            Pressure               PSI Temperature               OF I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                           WType : L1.52 As required by the provisions of the ASME Code Section XI Job Kumber 8 3 1 - 1041974401             Sheet 2      of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
While the replacement valve was at Wyle for testing/rcfurbishment under PO QP030376, the following new pans were installed:
,  NOZZLE - Scrial Number N94628-36-0012. Purchase Order OP040833            DISC INSERT - Serial Number N9.1630-34-0008. Purchase Order 0P970663 Certificate of Compliance We ccrtify that the statements made in the report are correct and this                       replacement                    conforms to the rules of the ASME Codc. Section XI.                                                              repair or replacement Type Code Symbol Stamp                                                                        NiA Certificate of Aothori7ation Number                                NIA                           Expiration Date                      NIA Signed                                                                    Maintenance Manager          Date       7t 7 / 6 6 Owner or Owner's Designee. Titlc Certificate of Inservice Inspection I, the undersigned, hold        a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                  /                       and employed by                 #dB CT                                                           of d          - - . -                                                              have inspected the components described in this E Z R z t d m e period                                        -04                to @ ~ / 3 , 2 0 0 6                             , and state that to the best of my knowledge and belief, t h e - O e i i e r f o r r n e d examinations and tagen cofrective measurer desiribed in this Owner's Report in accordance with the requirements of the ASME Codc, Section XI.
By signing this certificate neither the Inspcctor nor his crnployer makes any warranty, expressed or implied, concerning the examinations and corrcctive measurcs described i n this Owner's Report. Furthcrrnore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
                                                                       ~ornmissions       E/ 6T7               @//
National Board, State, Province, and Endorsemenls

Form NIS-2 Owner's Report for Repairs or Replacements                                                                      ItTyl~e: ~ 1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                      I                        1
: 1. Owner                                               2. Plant I       Ell-1051234801              Sheet Unit 1   of 2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                     FNP    I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                        Date (as agent for Alabama Power Company) 04/26/06
: 3. Work performed by                                                                Type Code Symbol Stamp N/A Name : S o u t h e r n a i n t e u e ~ n r t m e n t
                                                                                      ~                        p./p, Address :           Joseph M. Farlev Nuclear Plant                            Expiration Date N/A
: 4. Identification of System RHR/LOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:
1 6.
SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19
                                                                         - Edition Edition Identification of Components Repaired o r Replaced and Replacement Components:
N/A Addenda.
Addenda, Code Case Code Cast I
I Name of             Name of             Manufacturer         National           Other         Year        Repaired,           ASME Component          Manufacturer           Serial Number         Board       Identitication      Built     Replaced, o r          Code No.                                     Replacement           Stamped (Yes / Yo)
BYD SNUDUhR           GRINNF1,L                  12 153           NI A            TNP-222          1977      ILLI'LAC I I>          NO HYD SNUBBER           GRINNELL                   17009            NIA             FNP-222         1077   I2FI'LAC E M E N T         N0
: 7. Description of Work REPLACEMENT SNUBBER RHRRIOI WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER 90033 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
   . Test Conducted Hydrostatic         Pneumntlc           Normal Operating Pressure        None    (XI Other I          Pressure               PSI Temperature              OF I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 itrypr : ~  1.52 As required by the provisions of the ASME Codc Section XI                                 . Job Number Sheet 2 of 2 E l 1-1051234801
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SlJPPORTS RU[LT 1'0 AISC-1969 AND WELDED TO AWS 131 1-86, Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement                 co~~forms to the rulcs of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NI A Certificate of Authorization Numbcr                            NIA                        Expirat~onDate                     N!A Signed  i.'           &&-A+Owner or Owner's Desiencc. TitleMaintenance Manager                   Date     7( (Y d L II, the undersigned, holding Certificate of Inservice Inspection alid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                    ,+ear                                                     of h&TF&%'                0                                                     have inspected the components described in this Owner's Report during t                  h                h             m to            v / 9 , -6                        , and state that to the best of my knowledge and belief, the 0&er has p'erformed e x a m i n a t i o n s a n h n corfective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his einployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Fulthermore, neither the Inspector nor his enlployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected \\;it11 this inspection.
Cornn-iissions  &W                     M/I National Board, State, Province, and Endorsements Date        S&'L.~//~,W&
                   /      '1

Form NIS-2 Owner's Report for Repairs or Replacements                                                                    KTYPC : ~   1.52 As required by the provisions of the ASME Code Section Xi Job Number Ell-1051235101             Sheet   I   of' 2
: 2. Plant                                                    Unit Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                   FNP    I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                      Date (as agent for Alabama Power Company) 01!2Gi06 I
: 3. W o r k performed by                                                           Type Code Symbol Stamp NiA N a m e : Southern Nuclear Operating Companv Maintenance Department Authorization Number NiA Address :          Joseph M. Farlev Nuclear Plant                          Expiration Date N/A
: 4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:            SEE NOTE            19   - Edition                      Addenda,              Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,  19   -89 Edition         N/A       Addenda,       NfA     Code Case
: 6. Identification of Coniponents Repaired o r Replaced and Replacement Components:
Name of            Manufacturer         National         Other           Year       Repaired,           ASME I
Name of Component          Manufacturer          Serial Number         Board       Identification      Built    Replaced, o r          Code No.                                     Replacement          Stamped (Yes / No)
HYII SNUBBER          GRlNNELL                  12154            X A           FNP 222           1977      KLI'LAC'I I)           NO 1IYD SNUBBER           GRINNELL                  13592            N 'A          FNP-222           1977   REPLA("EMIIYT             YO
: 7. Description of Work I  REPLACEMENT SNUBBER RHRRI 05 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER 89942 I
   . Test Conducted Hydrostatic        Pneumatic          Normal Operating Pressure      None          Other I           Pressure              PSI Temperature              O F I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               RType : L1.52 As required by the provisions of the ASME Code Sect~onXI Job Number                       I                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         Ell-1051235101             Sheet 2 of 2 SUPPORTS BUI1,T TO AISC-1969 A N D WELDED 1'0AWS 131.1-86, Certificate of Compliance We certify that the statcrnents made in the report are correct and th~s               replacement                 confoi-msto the rules of the ASME Code, Section XI.                                                         repair or replacenlent Type Code Symbol Stamp                                                                NIA Certificate of Authorization Number                             NIA                      Expiration Date Signed                                                                Maintenance Manager       Date Owner or Owner's Desienee. Title Certificate of Inservice Inspection I, the undersigned, hoIding                mmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                       and employed by                                                                           of have inspected the components described riod               21, W L ;             to                   /9,                     , and state that to the best of my knowledge and belief, the Owner has p6rformed examinations and S r r e d v e measures described in this Owner's Report in accordance with the requii-enlentsof the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceining the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property danmge or loss of any kind arising from or connected with tllis inspection.
                                                                  ~ornrn~ssions     ,&'                   /fh4!
National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                       mypc    : L1.52 As required by thc prov~sionsof the ASME Code Sect~onXI Job Number                        I                        I
: 1. Owner                                               2. Plant I       El 1-1051235301               Sheet Unit i  of    2 Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                       FNP   I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                          Date (as agent for Alabama Power Con~pany) 04/26/06 I
: 3. Work performed by                                                                Type Code Symbol Stamp
                                                                                                                 &/A Name : Southern Nuclear Operating Companv Maintenance Deuartment Address :          Joseph M. Farlev Nuclear Plant                            Expiration Date N!A I  4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:            SEE NOTE            19  - Edition                        Addenda,                 Code Case (b) Applicable Section XI Utilized For Repairs 01.Replacements,  I9  89     Edition        N/A        Addenda.         NIA     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Manufacturer         National           Other          Year         Repaired,           ASME b
Component         Manufacturer           Serial Number         Board       Identification       Built     Replaced, or            Code No.                                      Replacement            Staniped (Yes / Yo) tIYD SNUBBER          GRINNELL                  12151            NIA             FNP-222          1977        Rt-PI-AC'l-1)          NO iIYD SNUBBER          GRINNELL                   12673            NA               20825          1'183   I2l-PL.A< kMCNT            \O
: 7. Description of Work REPLACEMENT SNUBBER RHRR99A WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBhR 904(,2 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
    . Test Conducted rn  Hydrostatic    rn  Pneumatic           Normal Operating Pressure        None        Other I            Pressure              PSI   Temperature            OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 HT?PC : ~ 1 . 5 2 As required by the provisions of the ASME Codc Section Xi Job Number                      I                        I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E l 1-1051235301 Sheet 2 of 2
 , SUPPORTS BUII<TTO AISC-1969 AND WPl.DEII7'0 AWS D l . 1-86, Certificate of Compliance We certify that the statements made in the report arc correct and this                 replacemcnt                 conforms to the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NIA
( Certificate of Authorization Number                             NI A                       Expiration Date                   NIA                   I I  Signed Owner or Owner's Designee, Title Maintenance Manager       Date      ?//dd Certificate of Inservice Inspection I, the undersigned, holding a valid commissioli issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                                                         # 5 ~ T-     c                                          of have inspected the components described in this Owner's Report during the period                     /                      to     czXh'Z/,-L                            ,and state that to the best of my knowledge and belief, t h e a a s per$ormrd examinations and d e n corfective measures described in this Owner's ~ e ~ oinl accordance t         with the requirements of the ASME Code, Section XI By signing this certificate neither the Inspector nor his employer makes any wan-anty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employes shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Co~nm~ss~ons        &/8f7             ,&//
Nat~onalBoard, State, Provmcc, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                     IlTypr :~  1.52 As required by the provisions of the ASME Code Section XI Job Number                      I                       1
: 1. Owner                                               2. Plant I       E21-1051227401               Sheet Unit I  of 2 Southern Nuclear Operating Company                          Farley Nuclear Plant 40 Inverness Center Parkway                                 Highway 95 South                                     FNP    I Birmingham, Alabama 35242                                   Columbia, Alabama 36319                        Date (as agent for Alabama Power Company) 04/26/06
: 3. Work perrormed by                                                               Type Code Symbol Stamp N/A Name : Southern Nuclear Oueratine Company Maintenance Deoartment Authorization Number N/ A Address :          Joseph M. Parlev Nuclear Plant                         Expiration Date 1                                                                                 I
: 4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM (a) Applicable Construction Code:
1 6.
SEE NOTE (b) Applicable Scction XI Utilized For Rcpairs Or Replacements, 19 19
                                                                        - Edition
                                                                        -89 Edition Identification of Components Repaired or Replaced and Replacement Components:
NIA Addenda, Addenda,        N!A Code Case C'ode Casc I
I Name of            Name of           Manufacturer          Wational        Other          Year        Repaired,            AS &I E Component          Manufacturer         Serial Number          Board      Identification     Built      Replaced, or           Code No.                                    Replacement           Stamped (Yes I No)
I-IY D.SNUf3BER         GRINNELI,               12125             N;A          FNP-222          1'177      KEPI..AC'ED              NO HYD.SNUBBER             GRINNELL                 13925             NIA            20825          108.3   RHI'I.AC'EMENT              NO
: 7. Description of Work REPLACEMENT SNUBBER CVCSR526 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
   .   'Test Conducted Hydrostatic        Pneumatic         Normal Operating Pressure      None     (XJ Other Pressure            PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               1l.r),W : I>I 5 2 As required by the provis~onsof the ASME Code Sect~onXI Job Kumber                      I                         I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I       E21-1051227401 Sheet 2      of 2 SUPPORTS 81131.1 TO AISC-1969 AND WEI,I>ED            AWS 11 t t-86.
I                                                          Certificate of Compliance We certify that the statements ~iiadein the report ere correct and th~s               replacement                 confor~nsto the rules of the I
ASME Code, Scction XI.                                                         repair or replacement Type Code Symbol Stamp                                                                Nl A 1
I Certificate of Authorization Number                             NIA                      Expiration Date 7i                 NJA Signed                                                                Maintenance Manager       Date          tyfb6 Owner or Owner's Desinee. Title Certificate of lnsewice Inspection I, the undersigned, holding a v lid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                   b                   and employed by
                                                                   ~7
                                                                                         &A=?-
have inspected the components described of in this Owner's Report during the period                    2/ %h 6                to A y A ' , M O L                           , and state that to the best of my knowledge and belief, the Owner has$erformed examinations and taken &o~recdvemeasures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concer~lingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Comni~ssions  rQ/ fT7 f l Inspector's Signature                                               National Board, State, Prov~nce,and Endorsements Date       ~qzi&/ >/, h 9 d . G
                            /

Form NIS-2 Owner's Report for Repairs or Replacements                                                                          I      ~ :~ T1  . 5~2 ~ ~
As requ~redby the provisions ofthe ASME Code Sect1011XI Job Number E21-1051228001               Sheet     I    of   3
: 1. Owner                                               2. Plant                                                        Unit Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                                      FhP       I Birmingham, Alabama 35242                                       Columbia, Alabama 36319                        Date (as agent for Alabama Power Company) 04,26100
: 3. Work performed by                                                                 Type Code Symbol Stamp Nl.4 Name : Soutllern Nuclear Operatine Companv Maintenance Department 1
NIA Address :           Joseph M. Farlev Nuclear Plant                             Expiration Date NlrZ
: 4. Identification of System HIGH HEAD SAFETY IKJECTION/CVCS SYSTEM I                                                                        -
I (a) Applicable Construction Code:            SEE NOTE             19         Edition                    Addenda,                 <:ode Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19 -  89 Edition         N /A         Addenda,       NiA       Code C:ase
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of             Name of             Manufacturer          National           Other          Year        Repaired,               ASME Component         Manufacturer          Serial Number           Board       Identification       Built     Replaced, or               Code No.                                       Replacement              Stamped (Yes I No)
HY DSNUBBER          GRINNELI.                  22386             N/II            FNP2-20           1981      IIEI'LACED                 N0 HYD.SNUUBER           GRINNELL                   17387             N!A              20825                   REPI-AC'EMENT                NO
: 7. Description of Work REPLACEMENT SNUBBER CVCSR496 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION N U M B E R 1)001S VT-3 WAS PERFORMED ON REPLACEMEN'I' SNUBBER.
   . Test Conducted Hydrostatic     [3 Pneumatic            Normal Operating Pressure         None         Other I          Pressure              PSI    Temperature            "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType : L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                       I                      1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E21-1051228001 Sheet   2  of 2 SUPPORTS BlJlLT TO AISC-1969 AND WELDED TO AWS D l . 1-86, I
Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement           - confor~nsto the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 N/ A I Certificate of Authorization Number                            N/A                        Expiration Date                    N/A                   I I Signed Owner or Owner's Desienee. Title Maintenance Manager Date            7 fly/ 6 6 Certificate of Inservice Inspection I, the undersigned, holdin         alid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of                                      and employed by                       # W C ~                                              o i' have inspected the components described in this Owne'r's Report durfng the period          &&, ;2/ , -06                    to        wqd&=,        W G                  , and state that to the best of my knowledge and belief, the Owner has pdrformed examinations and tak corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer sllal l be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
                                                                  ~ornrnissions      A/ 867               AN/
Inspector's Signature                                               National ~oard,'State: Province, and Endorscmenrs Date        &-&Lv  /
                         %, 2W6

Form NIS-2 Owner's Report for Repairs or Replacements                                                                          llType : ~ 1 . 5 2 A s required by the provisions of the ASME Code Section XI Job Number                        I                          I
: 1. Owner                                                2. Plant I       E21-1051228601                 Sheet Unit I  of 2 Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                                       FNP   I Birmingham, Alabama 35242                                       Columbia, Alabama 36319                         Date (as agent for Alabama Power Company)
I
: 3. Work performed by                                                                 Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Companv Maintenance Department
(
N: A Address :           Joseph M. Farley Nuclear Plant                           Expiration Date NIA
: 4. Identification of System HIGH HEAD SAFETY IhTJECTIONICVCS SYSTEM I  (a) Applicable Constructiofi Code:           SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, I9 19
                                                                           - Edition
                                                                           -89 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
N/A Addenda, Addenda,           NfA Code Case Code Casc I
Name of              Name of           hlanufacturer          National         Other           Year      Repaired,               ASME Component          Manufacturer          Serial Number           Board       Identification      Built    Replaced, o r             Code No.                                     Replacement             Stamped (Yes I No)
HYD SNUBBER            GRINNELL                 12662              NA             FNP-222          1077     l i l P I ACED             NO NYD SNUBBER            GRINNELL                 11013              Y /A            20825          1983    KEPL9CL MI-N I               NO
: 7. Description of Work REPLACEMENT SNUBBER CVCSR5 I5 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE REF TRANSACIION NUMBER 90764 VT-3 WAS PERFORMED O N REPLACEMENT SNUBBER
    . Test Conducted Hydrostatic         Pneumatic         Normal Operating Pressure        None          Other I            Pressure             PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                    RT?.PC : L1.52 As required by the provisions of the ASME Code Sectio~iXI Job Number                          I                      I 8  9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         E21-1051228601 Sheet 2     of 2 SUPPORTS BlJlLT 1'0AISC-1969 AND WELDED '1.0AWS Dl.!-86 Certificate of Compliance We certify that the statements made in the report arc correct and th~s                replacement                    conforms ro thc rules of the ASME Code, Section XI                                                          reparr or replacement Type Code Symbol Stamp                                                                 N/A Certificate of Authorization Number                            N/A                         Expiration Date                       N/A Signed
          &                                                              Maintenance Manager        Dote Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding       alid co~nmissionissued by the Nat~onalBoard of Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                    /&& c/-                                                    of have inspected the components described L        to 7
W6                   , and state that to the best of my knowledge and belief, t h e - O ~ a s ~ d ~ o ~ e x a m i n a t i o    a n sd < ~ z ~ 3 t i vmeasures e          described in this Owner's ~ e ~ oin ;accordance with the reqwements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising froin or connected with this inspection.
Commissions                           kd//
National ~ o a r dState,
                                                                                                             ,      Province, and Endorsenlents Date         gdL+ /?,
                     /

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           ~ ~ y : p~ 1 e .52 As required by the provisions of the ASME Codc Section XI Job Number                           I                         I
: 1. Owner                                               2. Plant I        E21-1051229001                  Sheet Unit I  of 2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                         FNP     I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                           Date (as agent for Alabama Power Company) 05/02/06
: 3. Work performed by                                                               Type Code Symbol Stamp N/ A Name : Southern Nuclear Operating Company Maintenance Department Authorization Number Address :           Joseph M. Farley Nuclear Plant                         Expiration Date
: 4. Identification of System HIGH HEAD S A F E T Y INJECTION/CVCS S Y S T E M (a) Applicable Construction Code:            SEE N O T E          19   - Edition                      Addenda,                     Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19   89 Edition          NI A       Addenda,           NIA       Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of            Manulacturer          National         Other            Year        Repaired,               ASME Component          Manufacturer          Serial Number          Board       Identification       Built    Replaced, or                Code No.                                      Replacement               Stamped (Yes I No)
NYD SNUBBER            GRINNELL                 12094             h:A           FNP-222            1977       KbI'l ACFD                  NO HYD SNUBBER            GRINNELL                  1 1720            NI 4           20825            1083    K l P I r\C I klL-Y I           XO
: 7. Description of Work REPLACEMENT SNUBBER CVCSR517 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRAhSACTION NCMBER ')0762 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
  . Test Conducted Hydrostatic    0Pneumatic             Normal Operating Pressure       None           Other Pressure             PSI    Temperature           O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                      I X T ~ ~ :C~ 1.52 As required by the provisions of the ASMECodc section XI Job Number                             I                         I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         E21-1051229001                   Sheet 2 ot' 7 SLJPPORTS BUILT TO AISC-1969A N D WELDED TO A W S D l . 1-86, I                                                        Certificate of Compliance We certify that the statements made ~nthe report ore correct and thrs                 replacement                        conforms to the ~ulesof'thc I
ASME Code, Section XI                                                          repalr or replacement Type Code Symbol Stamp                                                                N/A ICertificate or Authorization Number                            NIA                        Expiration Date                           N/A                    I I Signed                     fat&--
Owner or Owner's Desienee. Title Maintenance Manager       Date       7/lyl          '                               1 I                                                 Certificate of Inservice Inspection I, the undersigned, holding a valid cornmission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                     and employed by                    #sBc~'-                                                           of have inspected the components described in this Owner's Report                                                                                         W d L                   , and state that to the best of my know                                                                                      ctive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures descr~bedin this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal i n j u ~y or property danmge or loss of any kind arising from or connected with this inspection.
Cammissions        A/ fY7               &~II National ~ o a r d , ' ~ t a tProv~nce,
                                                                                                                       <        and Endorsements Date       d-~vw,m G
                   /      ,'

Form NIS-2 Owner's Report for Repairs or Replacements                                                                      ~ r r ~ :p1~1.52 c
A s requlrcd by the provisrons of the ASME Code S e c t ~ o nXi Job Number                      I                         I
: 1. Owner                                               2. Plant I       E21-1051237001             Sheet Unit I  of    2 Southern Nuclear Operating Company                             Parley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                   FNP    I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                       Date (as agent for Alabama Power Company) 04;26!06
: 3. Work performed by                                                                Type Code Symbol Stanip N/A Name : Southern Nuclear Operating Companv Maintenance Department NiA Address :          Joseph M. Farlev Nuclear Plant NiA
: 4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM II 5.
(a) Applicable Construction Code:            SEE NOTE              I0   - Edition                     Addenda,               Code Case (b) Applicable Section XI Utilized For Repairs 01.Rcplacemcnts,    19   -89 Edition         NIA       Addenda,       NIA     Code Case
: 6. Identification of Conlponents Repaired or Replaced and Replacement Components:
Name of             Name of            Manufacturer           National         Other          Year       Repaired,           ASME Component          Manufacturer          Serial Number           Board       Identification     Built    Replaced, o r          Code
                                                                       ;Yo.                                   Replacement          Stamped (Yes 1 No)
LOAD STUD               UNK                    1 INK              N:4           FNP-222           1977     Ktl'L.AC'ED             N()
NUT L O A D STUD         MACKSON                  M82491              N/A          QP040363          2004   REPLACEMENT                NO NUT
: 7. Description of Work LOAD STUD NUT WAS DAMAGED DURING REMOVAL. REPLACED N U T WITH NEW NUT. REF: TRANSACTION NUMBER 9 1206.
   . Test Conducted 0Hydrostatic            Pneumatic          Normal Operating Pressure        None         Other I            Pressure             PSI Temperature                 "F I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                      [<Type: 1~1.52 As requ~redby the provlslons of the ASME Code Section XI Job Number
* 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
E21-1051237001             Sheet 2 of 2 D W W E D TO A W S Dl-1-86. MATERIAI. I'OU ATTACHED DOCUMENT.
I                                                    Certificate of Compliance I
I Certificate of Authorization Number                       N/A                    Expiration Date                   N/A                 I I Signed e;r                                                      Maintenance Manager Owner or Owner's Designee. Title Date     7[f$/ D d I
I                                               Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                El                and employed by                 &BCT                                                 of
                 &$ffle&&)           ,    cr                                                 have inspected the components described in this Owner's Report during de period        #/2/~           mf, to                         19,-c                    , and state that to the best of my knowledge and belief, the 0&ner has pe&nned ezamination                     rreftive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enlployer sl~all be liable in any manner for any personal injury or property damage or loss of any kind arising from or coll~lectedwith this inspection.
Comnlissions    &PO National Board. Stat4 Province, and Endorsements Date        =M/       /9, a0 C

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           RType : L1.52 As required by the provisions of the ASME Code Section XI
                                                                                     ) Job Number                          1                      I
: 1. Owner                                                 2. Plant I                E21-1051237801 Sheet Unit 1   of 2 Southern Nuclear Operating Company                               Farley Nuclear Plant 40 lnvemess Center Parkway                                       Highway 95 South                                        FNP    1 Birmingham, Alabama 35242                                        Columbia, Alabama 36319                           Date (as agent for Alabama Power Company)                                                                                     0411 7/06 I
I                                                                I
: 3. Work performed by                                                                         Type Code Symbol Stamp N/ A Name t: /
ODerating Authorhation NI A Address :           Joseph M. Farlev Nuclear Plant                                     Expiration Date N/A
: 4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM 5.
(a) Applicable Construction Code.            SEE NOTE              19  - Edltion                             Addenda,            Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,    19  89 Edttion                   N/A      Addenda,     NlA    Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of             Manufacturer           National                  Other         Year      Repaired,        ASME Component         Manufacturer           Serial Number           Board       Identification             Built   Replaced, or         Code No.                                           Replacement       Stamped (YesI No)
MECH                PACIFIC                  26150              NIA           QP-1301                  1982     REPLACED            NO SNUBBER            SCiENTlFlC HYD SNUBBER             LlSEGA               30500420/014           KIA          QP050939                 2004   =PLACEMENT             NO
: 7. Description of Work SNUBBER SS-4301 WAS REPLACED AS A SCHEDULED UPGRADE REF: TRANSACTION NUMBER 87825 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic         Pneumatic           Normal Operating Pressure        None             [XI Other I          Pressure               PSI Temperature               OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                              IXTYPC: L 1.52 As required by the provis~onsof the PISME Codc Section XI Job Number                    I                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I       E21-1051237801 Sheet    2   of 2 SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl 1-80 REFERENCE EQUIVALENCY DETERMINATION ( I ED) 96-0-0225 REV 1 I Wc certify that the Certificate of Compliance statements made in the report are correct and this                 replacement               conforms to the rules ol'the I
ASME Code, Section XI.                                                          repalr or replacement Type Code Symbol Stamp                                                                 N/ A Cert~ficateof Author~zat~on Number                             NIA                        Exp~rat~onDate S~gned               C?&&/-          Owner or Ownel's Des~gnee,Title Marntenance Manager       Date Certificate of Inservice Inspection I, the undersigned, holding         lid commission issued by the National Board of*Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                     ,&we'-                                               of
                      /f"rZ ,                                                                       have inspected the components described in this Owner's Report during the$eriod                     sf'.ZooC;              to         =LV~W,-~                         , and state that to the best of my knowledge and belief, the Owner has p!rformed examinations and atkenb-ried                                        in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Lnspector nor his employer makes any warranty, expressed or implied, concelning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any inanner for any personal injury or property damage or loss of any kmd arising from or connected with this inspection.
Commissions        2 / Kg7 Mspector's Signature                                                National Board, st&, ~rbvince,and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code Section XI 1 Job Number I 1. Owner                                              12. Plant I        E21-1051238001 Sheet    I  of 2     I Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                                  FNP   I       I Birmingham, Alabama 35242                                       Columbia, Alabama 36319 (as agent for Alabama Power Company)
I
: 3. Work performed by                                                               Type Code Symbol Stamp N lA Name : Southern Nuclear Operatine Company Maintenance De~artment Address :           J o s e ~ hM. Farlev Nuclear Plant XI A I
: 4. Identification of System RHRnOW HEAD SAFETY INJECTION SYSTEM 5.
(a) Applicable Construction Code:            SEE NOTE             19  - Edition                      Addenda.             Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19  & Edition            N/A       Addenda,     N/A     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of              Manufacturer         National         Other           Year      Repaired,         ASME Component          Manufacturer           Serial Number          Board       Identification      BuiIt    Replaced, o r       Code No.                                     Replacement       Stamped (Yes/ No)
MECH.               PACFIC                   33519             N/A           QP- 1299          1981     REPLACED             NO SNUBBER            SCIENTIFIC HYD SNUBBER             LISEGA               30500420/047          N/A          QP050939          2004    KEPLACEMth'T           NO
: 7. Description of Work SNUBBER SS-4162A WAS REPLACED AS A SCHEDULED UPGRADE. REF: TRANSACTION NUMBER 87827 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic          Pneumatic     C]   Normal Operating Pressure       None          Other I          Pressure               PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                  HTvpe : L 1.52 As required by the provisions of the A ~ M CodeE      Section X1 1 Job Number                      1                       1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E21-1051238001             Sheet    2   of 2 1
r-1969AND W         w     '    i fAWS1 I-Xh I
REFERENCE EQUIVALENCY DETERMINATION ( E D ) 76-0-0225 REV I I
I                                                         Certificate of Compliance We certify that the statements made in the repolt are correct and this                   replacement repair or replacement conforms to the rules of the I
ASME Code, Section XI.
Type Code Symbol Stanip                                                                  NIA Certificate of Authorization Number                            N/A                          Expiratcon Date w'
Signed                                                                   Maintenance Manager        Date Owner or Owner's Designee. Title II, the undersigned, holding Certificate of Inservice Inspection ssure Vessel Inspectors and the State I
or Province of                                                                                                                                    of have ~nspectedthe compoilents described Z o o .6               , and state that ective measures described in this Owner's Repol-t in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liabIe in any nlanner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Coliini~sslons National Board,'State, Prov~nce,and Endorsements 1 Date

Form NIS-2 Owner's Report for Repairs or Replacements                                                                    H   T : L1.52
                                                                                                                                     ~ ~    ~
As required by the provisions of the ASME Code Section XI I Job Number                     I                     I 1 1. Owner                                              12. Plant I       E21-1051238201 Sheet 1 of 2 Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South Birmingham, Alabama 35242                                      Columbia, Alabama 36319 (as agent for Alabama Power Company I
: 3. Work performed by                                                               Type Code Symbol Stamp NIA Name : Southern Nuclear Operatine Company Maintenance Department Authorization Number Address :           Joser~hM. Farlev Nuclear Plant                           Expiration Date I 4. ~dentificationof System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utiii7xd For Repairs Or Replacements, 19 19
                                                                        - Edition
                                                                        -89 Edition          N/A Addenda.
Addenda,       N/A Code Case Code Case    I 6, Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of             Manufacturer          National         Other           Year       Repaired,       ASME Component         Manufacturer           Serial Number          Board       Identification      Built     Replaced, or      Code No.                                      Replacement     Stamped (Yes I No)
MECH                PACIFIC                  34958             N/A           QP-1299           1983      REPLACED          NO SNUBBER            SC[ENTlFIC HYD SNUBBER             LISEGA               30500420/016          NIA          QP050939          2004     REPLACEMENT         NO
: 7. Description of Work SNUBBER SS-4152 WAS REPLACED AS A SCHEDULED UPGRADE. REF. TRANSACTION NUMBER                             90895 VT-3 PERFORMED ON REPLACEMENT SNUBBER Hydrostatic         Pneumatic          Normal Operating Pressure       None          Other Pressure               PSI Temperature              O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType :L1.52 As required by the provisions or the ASME Code Section XI
                                                                                         ) Job Number                        I                     1
: 9. Remarks (ApplicableManufacturer's Data Reports to be attached)
I       E21-1051238201                Sheet 2 of 2 SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS Dl 1-86 REFERENCE EQUIVALENCY DETERMINATION (LED) 96-0-027-5. REV. 1 Certificate of Compliance We cenify that the statements made in the report are correct and this                  replacement                 conforms to thc rules or the ASME Code, Section XI.                                                         repair or replacement Type Code Symbol Stamp                                                                 N/A               -
Certificate of Authori~ationNumber                            N/A                        Expiration Date                      KIA Signed r~~            &L                                             Maintenance Manager       Date      7 I'Y/~     6 Owner or Owncr's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                k/                    and employed by                   &SBC/-                                                    of
                              >       C i r                                           '            have inspected the components described dng the period -&+,              ~6                   to to the best of my knowledge and belief, the Owner h6s performed cxarnination Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Tnspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his crnployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions        R/ f l 7                  //
National Boarh: State: Province, and Endorsements Date          rhbr/      w,

Class 2 Form NIS-2 Owner's Report for Repairs or Replacements                                                                    WTYP:L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051229601 Sheet   1 of     2
: 1. Owner                                               2. Plant                                                   Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                  Fl\jp   1 Birmingham, Alabama 35242                                      Columbia, Alabama 36319                     Date (as agent for Alabama Power Company)                                                                             04/27/06
: 3. Work performed by                                                              Type Code Symbol Stamp NIA Name : Southern Nuclear     opera tin^ Company Maintenance Department Authorization Number N/A Address :           Joseph M. Farlev Nuclear Plant                          Expiration Date N/A
: 4. Identification of System RHRLOW HEAD SAFETY INJECTION SYSTEM 5.
(a) Applicable Construction Code:            SEE NOTE             19  - Edition                      Addenda,              Code Case (b) Applicable Section XI Utilizcd For Repairs Or Replacements. 19  89 Edition          N/ A       Addenda,     N/A      Code Case I
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of              Name of             Manufacturer         National        Other              Year      Repaired,         ASME Component         Manufacturer            Serial Number         Board       Identification        Built   Replaced, or         Code No.                                      Replacement        Stamped (Yes I No)
HYD.SNUBBER           GKINNELL                  14750             N/A           MP-222             1977      KEPLACED             NO HYII.SNUBHER           GRINNELL                  19516             N/A            20825             1983   REPLACEMENT             NO
: 7. Description of Work REPLACEMENT SNUBBER RHRR98XA WAS REBUlLT PRE-OUTAGE TO MEET SCHEDULE REFERENCE TRANSACTION NUMBER 003 t VT-3 COMPLETED AFTER SNUBBER WAS KEPLACED
: 8. Test Conducted Hydrostatic         Pneumatic          Normal Operating Pressure       None          Other Pressure              PSI Temperature              O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                              RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051229601              Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
NOTE: SUPPORTS ARE DESIGNED TO AISC- 1969 AND WELISED TO AWS D1.l 4
Certificate of Compliance We cer~ifythal the statcmen~smade in thc report are correcl and this                 replacement                 cvnforms lo the rules of the ASME Code, Section XI.                                                        repair or rcplacement Type Code Symbol Stamp                                                               N/A Certificate oi Authorizalion Number -                        N/A                        Expiration Date                    NIA Signed  @              (
7-          Owner or Owner's Desicnee. Title Maintenance Managcr          te    7 lfv/d 6 1                                                 Certificate of Inservice Inspection I, the undersigned, holding      alid commission issued by the National Board of Boilcr and Pressure Vessel Inspectors and thc State or Province of                                    and cmployed by             HSBCT                                                           of have inspected the cornponcnts described in this Owner's Report during thkperiod       a,          21 . -6                 to                 v=.      ZQB 6 to the best of my knowledge and belief, the Owner has firformed examinations and takendorrectiGc measures described in this
                                                                                                                                  , and state that Owner's Report in accordance with the recluircments of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implied, concerning the examinalions and corrective measures described in this Owner's Report. Furtherrnorc, neither thc Inspector nor his ciPloyer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions      kkKJ'7                fiRI//
National Hoard, State, Province, and Endorsements 1  Date

Form NIS-2 Owner's Report for Repairs or Replacements                                                                Rl.ype : ~ 1.52 A s required by thc provisions o f the ASME Code section XI
                                                                                   ) Job Number                   I                     I
: 1. Owner                                              2. Plant I       Ell-1051230401           Sheet I Unit of   2 Southern Nuclear Operating Company                           Farley Nuclear Plant 40 Inverness Center Parkway                                  Highway 95 South                                FNP   I Birmingham, Alabama 35242                                    Columbia, Alabama 36319                    Date (as agent for Alabama Power Company) 04/26/06
: 3. Work performed by                                                              Type Code Symbol Stamp Kt'A I
Name : Southern Nuclear Overstine Companv Maintenance Department N!A I
I Address :
: 4. Identification of System Joseph M. Farlev Nuclear Plant I
Expiration Date N /A RHRILOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code             SEE NOTE (b) Applicable Scctlon XI Ut~llzedFor Repalrs Or Replacements, 19 19
                                                                        -Ed~t~on
                                                                        -89 Edlt~on
: 6. Identification of Components Repaired or Replaced and Replacement Components:
NI A Addenda, Addenda,      N/A Code Case Code Case I
Name of             Name of            Manufacturer        National          Other         Year      Repaired,        ASME Component          Manufacturer          Serial Number        Board       Identification     Built   Replaced, or        Code No.                                   Replaceme~~t Stamped (Yes I No)
HYDSNUBBER            GRINNELL                 12028            N.'A           FNPZZZ          1977     REPLACED             NO HYD.SNUBBER            GRINNELI.                11748            N ;A           FNP222          1977  REPl..ACIEMENT         N0
: 7. Description of Work REPLACEMENT SNUBBER RHRGRG7B WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER ')0067 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
   . Test Conductetl fl None W Other I            Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure "F

Form NIS-2 Owner's Report for Repairs or Replacements                     -
HType : L1.52 As required by the provisions of the ASME Codc section XI Job Number                          I                       i
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        El 1-1051230401                 Sheet 2 of 2 I,'rTO
                           -   A.  -               . .. ..10 AWS Aws1.1-86.
I                                                         Certificate of Compliance I
dI We certify that the statemcnts made in the report are correct and this             replacement                     confol-ms to the rules of the ASME Code, Section XI.                                                      repair or replacement Type Code Symbol Stamp                                                             NI A M
Certificate of Authorization Number                            NI A                   Exp~rat~on Date                        NIA                   I I  signedfi
                                     - Owner or Owner's Designee. TitleMaintenance Manager       Date       711%/a 6 Certificate of Inservice Inspection I'ressure Vessel Inspectors and the State JJd8c                                                    of have inspected the components described to                   w,        a d 6              , and state that to the best of my knowledge and belief, the Owner has #rformed examinations                         i ~ e d i v emeasures described in this Owner's R e ~ o rin t accordance with the resuirements of the ASME Code. Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concen11ng the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his en~ployershall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this 1 inspection.
comm~ss~ons   &       88 7 M//
National Boara, State, Prov~nce.and Endorscrnents

Form NIS-2 Owner's Report for Repairs or Replacements                                                                   RType : L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                     I                     I
: 12. Plant I        E11-1051230501            Sbeet Unit I  of   2 Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South Birmingham, Alabama 35242                                      Columbia, Alabama 36319 (as agent for Alabama Power Company)
I
: 3. Work performed by                                                               Type Code Symbol Stamp NI A Name : Southern Nuclear Operating Cornuanv Maintenance Department Authorization Number NIA Address :           Joseph M. Farfey Nuclear Plant                           Expiration Date NI A
: 4. Identification of System RHWLOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 I9
                                                                          - Edition 89 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
N/A Addenda, Addenda,       N/A Code Case Code Casc II Name of            Name of             Manufacturer          National         Other          Year      Repaired,         ASME Component         Manufacturer           Serial Number          Board       Identification     Built    Replaced, o r       Code No.                                   Replacement        Stamped (Yes / No)
HYD SNUBBER           GRJNNELL                   l266l             hlA           TNP-222          1977     IIt PLAC Ell         NO HYD SNUBBER           GRTNNELL                   I5519             N'A           FNP-222          1977  REPLACtM E   N
: I       NO
: 7. Description of Work REPLACEMENT SNUBBER SIR106 WAS REBUILT PRE-OUTAGE 7 0 MEET SCHEDULE REF TRANSAC rION NUMBER 8903!,
VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
   . Test Conducted Hydrostatic         Pneumatic           Normal Operating Pressure       None         Other 1          Pressure               PSI Temperature              "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                             KTYPC : L1.52 Certificate of Compliance We cert~fythat thc staterncnts made In the report arc correct and th~s               replacement                conforn~sto the rules of thc ASME Code, Sect~onXI.                                                         repair or replacement Type Code Synlbol Stamp                                                              N/A Certificate of Authorization Number                            NIA                      Expiration Date                   NiA Signed fl                   4'0-                                     Maintenance Manager      Datc     i ) / ~0g  6 Owner or Owner's Designee. Titlc I
I 1 or Province of                   R/
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the Natlonal Board of BoiIer and Pressui-e Vessel Inspectors and the State and employed by                      ffsSc7-                                             of have inspected the components described
                                                                                                                                , and state that rrectid measures described in this Owner's Report in accordance with the req~tiren~ents         of the ASlME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or corlnected with this inspection.
w t b r ' s s~gnature                                              Nat~onalBoard, State, Province, and~ndorscnicnrs

Form NIS-2 Owner's Report for Repairs or Replacements                                                                  RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number Ell-1051231201 Sheet 1 of 2 I
: 1. Owner                                               2. Plant                                                  Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                FNP    1 Birmingham, Alabama 35242                                      Columbia, Alabama 36319                    Date (as agent for Alabama Power Company)                                                                            04/27/06
: 3. Work performed by                                                             Type Code Symbol Stamp N/A Name : Southern Nuclear O~eratineCompany Maintenance Department p
NIA Address :            Joseph M. Farlev Nuclear Plant                        Expiration Date NIA
: 4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM 5.
(a) Applicable Construction Code:            SEE NOTE            19 - Edition                       Addenda,            Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,  19 89 Edition            NIA       Addenda,    N/A     Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of              Name of            Manufacturer         National         Other           Year      Repaired,        ASME Component         Manufacturer          Serial Number          Board       Identification      Built   Replaced, or        Code No.                                    Replacement       Stamped (Yes 1 No)
HYD. SNUBBER           GRINNELL                  9876             NIA           MP-222            1977     REPLACED            NO HYDSNUBBER             GR INNELL                 15529            NIA           FNP 2-29          1981  REPLACEMENT            NO
: 7. Description of Work REPLACEMENT SNUBBER RHK6R58 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER ON REPLACEMENT SNUBBER Hydrostatic          Pneumatic    0     Normal Operating Pressure      None          Other Prmure                 PSI Temperature              O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 ~ y p :eL152 As required by the provisions of the ASME Code Section XI 1 Job Number                      I                       I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        Ell-1051231201             Sheet 2 of        2 SUPPORTS DESIGNED TO AICS- 1969 AND WELDED TO AWS D l . 1-86.
~                                                           Certificate of Compliance We certify that the statements made i n the report are correct and this ASME Code, Section XI.
Type Code Symbol Stamp Certificate of Authori~alionNumber                              N/ A replacement repair or replacement A
                                                                                        - Expiration a      t conforms to the rules of the NIA I1 Signed                                                                  Maintenance Manager       Date     7 / ' ~ '/ '
Owner or Owner's Designee, Title Certificate of Inservice Inspection I, thc undersigned. holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stale or Province of                  &I                   and employed by                    ,+&-                                                    of have inspected the components described W6                to            #        ,280L                ,and state that to the her1 of my knowledge and belief. t h e e h z i e r f o r m e d examiKations a n d Z e h c!f:vite          measurer described in this Owner's Report in accordance wiih the rcquiremcnts of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected wilh this inspection.
                                                                    ~omrnissions       /$' Rr7                     /1 National Board, Sdte, ~;o;ince, and Endorsements Date       'S'%W/S.          m&

Form NIS-2 Owner's Report for Repairs or Replacements                                                                         R T Y W : L 1.52 As required by the provis~onsof the ASME Code Sect~onX1 Job Number                         I                          1
: 1. Owner                                               2. Plant I       Ell-1051232101                  Sheet Unit I   of    2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                        FNP    1 Birmingham, Alabama 35242                                      Coluntbia, Alabama 3631 9                         Date (as agent for Alabama Power Company) 04/26/00
: 3. Work performed by                                                               Type Code Symbol Stamp Ni.4 Name : Southern Nuclear Operatine Companv Maintenance Department
                                                                                   )
N iA Address :           Joseph M. Farley Kuclear Plant                           Expiration Date NIA I
: 4. Identification of System RHRiLOW HEAD SAFETY INJECTION I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19
                                                                        - Edition 89 Edition
: 6. Identification of Components Repaired or Replaced and Replacement Components:
N/A Addcnda, Addenda,            KfA Code Case Code Case II Name oi             Name of             Manufacturer          National        Other           Year       Repaired,                ASME Component          Manufacturer           Serial Number          Board      Identification      Built     Replaced, or               Code No.                                    Replacement              Stamped (Yes / No)
HYI) SNUBBER           GRINNhLL                  h969              NA           FNP-222           1077      l<t 1'1 I\(  tC)            \O klYD SNUBBbR          GRlNkELt                   11751             NA             20825           I      IICPLAC LML N1                20
: 7. Description of Work REPLACEMEN r SNUBBER RHRIOR29 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER                                        90353 VT-3 WAS PERFORMED ON REPLACEMENT SY UBBER
  . Test Conducted Hydrostatic Pressure 0 Pneumatic PSI hormal Operating Pressure Temperature           O F None     a    Other

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                  RTypr : L1.52 As required by the provisions of the ASME Codc Section XI Job Number                      I                      I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         Ell-1051232101            Sheet 2 of 2
, SUPPOR'TS BlIIL7' 7'0AISC-1969 AND WELDED TO AWS 111.1-86.
Certificate of Compliance We certify that the statements made in the report arc correct and this                 replacement                 conforms to the rules of [he ASME Code, Section XI.                                                          repair or replacement Type Codc Symbol Stamp                                                                  NIA Certificate of Authorization Number                            NIA                         Expiration Date                    N 1.4 Signed
         &              fl-                                              Maintenance Manager       Date Owner or Owner's Designee, Title Certificate of lnservice Inspection or Province of                    d/
I, the undersigned, holding a v id commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State and employed by                    ,&sBC       ?-
have inspected the components described of d&                , and state that tive measures described in this Owner's Report in accordance with the requirements of the AS,ME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inylied, concet-i~ingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Con~~nissions     PI C 7                        //
National Board, State, ~rdvince,and Endorsements Date                            m&Lf
                       /

Form NIS-2 Owner's Report for Repairs or Replacements                  -                                                      . . :~ 1 . 5 2 KTYVE As required by thc provisions of the ASME Code section XI Job Number                         I                        1
: 1. Owner                                              2. Plant I        El 1-1051232201               Sl~eet I Unit of 2 Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                     FNP     I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                         Date (as agent for Alabama Power Company) 0-1 25 00
: 3. Work performed by                                                             Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Companv Maintenance Department Authorization Number N/4 Address :           Joseph M. Farlev Nuclear Plant                         Expiration Date N/A I 4. Identification of System RHRILOW HEAD SAFETY INJECTION (a) Applicable Construction Code:           SEE NOTE            I9  - Edition                        Addenda,                C'odc Cast
   @) Applicable Section XI Utilized For Repairs 01.Replacements. 19  - 89 Edition         N/A         Addenda,        NfA     Codc Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of            Name of            Manufacturer         National         Other           Year         Repaired,           ASME Component         Manufacturer          Serial Number         Board       identification      Built      Replaced, or           Code No.                                       Replacement          Stamped (Yes I No)
HYD.SNUDDER          GRINNELI,                 8686             N,'A          FNI'-222          1977        REI'I-ACED              NO HYDSNUBBER            GRINNELL                 24 183            NiA           FNP2-29           1'181    ICEPI.A('EMEN7             NO
: 7. Description of Work REPLACEMENT SNUBBER RHRI OR46 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE REF: TRANSACTION NtiMBER 90(327 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
   . Test Conducted Hydrostatic         Pneumatic          Normal Operating Pressure      None          Other I          Pressure              PSI 'rempernture             "F

Form NIS-2 Owner's Report for Repairs or Replacements                         -                                                       IZTypc : ~  1.52 As required by the provis~onsof the ASMECodc section XI Job Number E l 1-1051232201            Sheet    2  of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SUPPORTS BUILT TO AISC-1969 AND WELDEII '1'0AWS D 1.1-86.
Certificate of Compliance We certify that the statements made in rhc report are correct and this                 replacement                 conrorms to rhc r~llesof the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NI A Certificate of Author~zationNumber                              NIA                        Exp~rationDate -                   NIA Signed
        &                 ,gL&                                          Maintenance Manager       Date      7/1% / J L Owner or Owner's Desienee. Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                                                                                                                   of the components described in this Owner's Report du                                                                                                        , and state that to the best of my knowled                                                                                            sures described ill this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concel~~ing             the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his en~ployershall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Co~nni~ssions     k ~ T 7h//
National Board, State, Provincc, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                       K T Y ~ :C~ 1 . 5 2 A s required by the provisions o f the ASME Code Section XI Job Number Ell-1051232401                Sheet   I   of    2
: 1. Owner                                               2. Plant                                                       Unit Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                      FNI'    I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                         Date (as agent for Alabama Power Company) 04/25/06
: 3. Work performed by                                                              Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company Maintenance Deuartment N/A Address :           Joseph M. Farley Nuclear Plant                         Expiration Date N /A
: 4. Identification of System RHRILOW HEAD SAFETY MJECTION SYSTEM (a) Applicable Construction Code:            SEE NOTE            19  - Edition                       Addenda,                 Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,  19  - 89 Edition         N/A       Addenda,          N/A     Code Case
+                                                                                                                                                I
: 6. Identification of Components Repaired or Replaced and Replacement Components:
I     Nameof              Name of            Manufacturer         National         Other           Year        Repaired,             ASME Component          Manufacturer          Serial Number         Board       Identification      Built    Replaced, o r             Code No.                                     Replacement             Stamped (Yes / No)
HYD SNUBBER           GRINN ELL                 20208            K/A           PNP-222           1977       REPLACED                  hO HYD SNUBBER            GRIXNELL                 20724 1           N/A             10323           1983   R I 1'1 AI'l-MLN1             NO
: 7. Descri~tionof Work REPLACEMENT SNUBBER RHR6RG8 WAS REBUILT PRE-OUTAGE T O MEET SCHEDULE. REF. TRANSACTION NL'MBEK ')Ooj:!
MED ON REPLACEMENT SNUBBER Hydrostatic         Pneumatic          Normal Operating Pressure      None          Other Pressure             PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                  RTypr : ~    1.52 As required by the provisions of the ASME Code Section XI I Job Number                       I                        1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         Ell-1051232401             Sheet    2 of       2 SUPPOR'rS BIIIL'I'TO AISC-1969 AND WELDED 1'0 AWS D1.1-86 I                                                         Certificate of Compliance                                                                    I We certify that the statements made in the report are correct and this ASME Code, Section XI.
Type Code Synlbol Stamp Certificate of Authorization Number Signedgd              L&%%w-NIA Owner or Owner's Designee. Title replacement repair or replacenlent N/A Maintenance Manager Expiration Date Date confornis to the r ~ ~ lof hiA I
e stlic II, the undersigned, holding Certificate of Inservice Inspection alid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                    /                 and employed by                    /'f5~~/-                                                    of P       w , CT                                                              have inspected the components described in this Owner's Report during tidperiod           ,&$fw, 6                          to                                            ,and state that to the best of my knowledge and belief, the Owner hadperformed examination                              rrktive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore. neither the 1nsDector nor his e&~over shall be liable in any nlanner for any personal injury or property damage or loss of any kind arising fiom or connected with this inspection.
                                                                  ~ornniissions     /&8'27 &N//
National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                        lvrype:~   1.52 As required by the provisions of the ASME Code Sect~onXI 1 Job Number                      f                          1
: 1. Owner                                               2. Plant I      Ell-1061322601                Sheet Unit I   of 2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                      FNP     I Birmingham, Alabama 35242                                      Colunlbia, Alabama 36319                       Date (as agent for Alabama Power Company) 0511 2/06
: 3. Work performed by                                                               Type Code Symbol Stamp N/ A Name : Southern Nuclear Operatine Company Maintenance Department Authorization Number Address :           J o s e ~ hM. Farley Nuclear Plant NIA I
: 4. Identification of System RHRILOW HEAD SAFETY INJECTION SYSTEM I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19 - 80 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
NA Addenda.
Addenda,          NiA Code Case Code Case II Name of             Name of             Manufacturer          National         Other          Year      Repaired,               ASlME Component         Manufacturer           Serial Number          Board      Identification      Built   Replaced, o r               Code No.                                   Replacement              Stamped (Yes I No)
HYD SNUBBER           GRlNNELL                  10189             N A           FNP-222          1077     R t P l AC t l l            NO HYD SNUBBER          GRlNNELL                   17003             KIA           FNP-222          1977  REPLACEMENT                    NO
: 7. Description of Work REPLACEMENT SNUBBER RHR6R65 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER 93023 ON REPLACEMENT SN UDDER Hydrostatic         Pneumatic          Normal Operating Pressure       None         Other Pressure               PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 RTYPE : 1.1.52 As required by the provisions of the ASME Code Section XI Job Kumber El 11061322601              Sheet   2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Certificate of Compliance I
We certify that the statements made in the report are correct and this                 replaccmcnt                 conforms to thc rules of the ASME Code, Section XI.                                                           repair or replacement Type Code Symbol Stamp                                                                  NIA
( Certificate of Authorization Number                             NIA                       Expirat~onDate                      NIA                  I S~gned @                                                               Maintenance Manager       Date    711 v / b L Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid comrnissioil issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                  f/                  and employed by                  @&cr                                                       of Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concer~lingthe examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal iniury or property danmge or loss of any kind arising from or connected with this inspection.
Commissions       '42' Bg-7        A.N//
National Board, State, Province, and Endorsements T W t / / 9 *@b
                    /      '

Form NIS-2 Owner's Report for Repairs or Replacements                                                                 HType : L1.52 As rcquired by the provisions o r the ASME Code Section X I Job Number Ell-1061421701          Sheet 1 of 2
: 1. Owner Southern Nuclear Operating Company
: 12. Plant Farley Nuclear Plant
( unit                I 40 Inverness Center Parkway                                    Highway 95 South                                FNP   1 Birmingham, Alabama 35242                                      Columbia, Alabama 36319                    Date (as agent for Alabama Power Company) 05/20/0h
: 3. Work performed by                                                              Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Companv Maintenance Department N/A Addrcss :           Joseph M. Farlev Nuclear Plant                          Expiration Date N/A
: 4. Identification of System RHRLOW HEAD SAFETY INJECTION SYSTEM (a) Applicable Construction Code:       ASME SECTION III (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 - Edition 19  89 Edition
: 6. Identification of Components Repaired or Replaced and Replacement Components:
N/A Addenda, Addenda,      N/A Codc Case Code Case I
Name of            Name of            Manufacturer         National          Other           Year       Repaired,       ASME Component          Manufacture          Serial Number         Board        Identification      Built    Replaced, or       Code r                                    No.                                      Replacement      Stamped (Ye5I No)
HYD-SNUBBER           GRINNELL                 208 12            N/A            FNP-222           1977      REPLACE11         NO HYD-SNUBBER           GKINNELL             267353 K7668          N/A             10323            1983   REPLACEMENT          NO
: 7. Description of Work REPLACEMENT SNUBBER KHKl10 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF: TRANSACTION NUMBER 93504 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER Hydrostatic         Pneumatic          Normal Operating Pressure       None         Other I           Pressure              PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType : L1.52 As required by the provisions of the ASME Codc Section XI Job Number N12-1051231801               Sheet 2     of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Certificate of Compliance We certify that the statements made in the report are comcl and this                 replacement                  conforms to the rules of the ASME Code. Section XI.                                                        repair or replacemenl Type Code Symbol Stamp                                                               N IA Certificate of Authorization Number                          N*!                        Expiration Uate                     hT/A Signed I Z ~          &%&-                                          Maintenance Manager Date 7 / ~ Y / D Owner o r Owner'z Desienee. Tille Certificate of Inservice Inspection I. the undersigned, holding         id commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of        ,                              and employcd by               fi&c                                                        of a7                                                 have inspected the components described in this Owner's Report during the eriod                                          to              Z~D    W E  U6                 , and state that to the bcst of my knowledge and belief, the owncf has p6rformed e x a m i n a t i o n s a n d e n codective measures duscribed in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty. expressed or implicd, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions    1.4/ KT7 National Board, 'state, Province, and Endorsements Dare
                  /

Form NIS-2 Owner's Report for Repairs or Replacements                                                                      RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number E13-1051231901 Sheet   1 of    2
: 1. Owner                                                  2. Plant                                                   Unit Farley Nuclear Plant Southern Nuclear Operating Company 40 Inverness Center Parkway Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319                    Date FNP   1 (as agent for Alabama Power Company)                                                                               04/24/06
: 3. Work performed by                                                                 Type Code Symbol Stamp NIA Name : Southern Nuclear O ~ e r a t i nC~o: m ~ a n vMaintenance Devartment Authorization Number N/A Address :           Joseph M. Farley Nuclear Plant                             Expiration Date N/A
: 4. Identification of System CONTAINMENT SPRAY SYSTEM 5.
(a) Applicable Construcl~onCode.             SEE NOTE                19  - Edit~on                      Addenda,            Code Case (b) Applicable Sectlon XI Utilized For Repiurs Or Replacements.      19  89 Ed~t~on           NIA       Addenda,     NIA    Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of             Manufacturer             National         Other           Year      Repaired,        ASME Component         Manufacturer           Serial Number             Board       Identification      Built    Replaced, or       Code No.                                     Replacement      Stamped (Yes / No)
HYD SNUBBW             GRINNELL                   22378               N/A           FNP-222           1977     REPLACED           NO HYD SNUBBER          GRINNELL                    13690               NIA            20825            1983   REPLACEMENT          NO I
: 7. Description of Work REPLACEMENT SNUBBER CSR290B WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF. TRANSACTION NUMBER 92920 T-3 PERFORMED ON REPLACEMENT SNUBBER
: 8. Test Conducted Hydrostatic    [7 Pneumatic            Normal Operating Pressure          None          Other Pressure              PSI    Temperature               O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                              ~ y p :eL1.52 As required by the provisions of the ASME Codc Section XI Job Number El3 1051231901           Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
NOTE: SUPPORTS ARE 1)ESIGNED TO AlSC- 1969 AN]> WELDED TO AWS D 1 . 1 Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement               conforms to the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbot Stamp                                                                 NI A Certificate of Authori~ationNumber                             h'lA                       Expiration Datc                 NIA Signed P'             -
0                                               Maintenance M a n a p r   Dale   7//Y/ 0 6 Owner or Owner's Designec, Title L
Certificate of Inservice Inspection Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By sign~ngt h ~ certificate s         neither the Inspccior nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owncr's Report. Furthermore, ncither the Inspector nor his cmployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising f ~ o mor connected with this inspection.
Commissions

Form NIS-2 Owner's Report for Repairs or Replacements                                                            R I - ~ ~ :C~1.52 As required by the provisions of the ASME Code Section    XI
                                                                                ) Job Number               I                        1
: 1. Owner                                               2. Plant I      E13-1051233501        Sheet Unit 1   of 2 Southern Nuclear Operating Company                           Farley Nuclear Plant 40 Inverness Center Parkway                                  Highway 95 South                             FNP     I Birmingham, Alabama 35242                                    Columbia, Alabama 36319                Date (as agent for Alabama Power Company) 04/26/05
: 3. Work performed by                                                            Type Code Symbol Stamp NIA Name : Southern Nuclear Ooeratine Companv Maintenance De~artment Authorization Number N/A I
Address :           J o s e ~ hM. Farlev Nuclear Plant                    Expiration Date NIA
: 4. Identification of System CONTAINMENT SPRAY SYSTEM I(a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, I
19 19
                                                                     - Edition
                                                                     -89 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
NlA Addenda, Addenda,   N/A Code Case Code Case II REPLAC~MENTSNUBBER CS2RI3 t WAS REBUILT PRE-OUTAGE TO MEETSCHEDULE. REF: TRANSACTIOk NUMBER ()0485 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
Hydrostatic         Pneumatic          NormalOperating Pressure      None        Other Pressure              PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                KTYPC:   ~1.52 As requircd by tlie provisions of the ASMECode Section XI
                                                                                            ) Job Number                       I                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I       E13-1051233501               Sheet 2 of 2 SUPPORTS BUILT TO AISC-1969 AND WELDED (1 AWS D 1.1-86 i
Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement                 conforms to the rules of the ASME Code, Scct~onXI.                                                           repair or replacement Type Code Symbol Stamp                                                                 N/A Certificate of Authorization Number                            NIA                        Expiration Date                    NIA Signed e'.                                                            Maintenance Manager       Date     7/1y/b      4 Owner or Owner's Designee, Titlc II, the undersigned, holding Certificate of Inservice Inspection id commiss~onissued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of 2fh?xma. W
                                                 -    and employed by A&&-
have inspected the components described of.
in this Owner's Report during the feriod          M .z/ ,                  6        to to the best of my knowledge and belief, the Owner has ~ d o r m e dexamination Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspec tion.
Commrss~ons         & W9                      //
National Board, Statc,'Province,and Endorsen~ents 1 Date          &Ry/?,           7 6 0 6

Form NIS-2 Owner's Report for Repairs o r Replacements                                                                      HTYPC : ~  1.52 As required by the provisions of the ASME Code Section XI Job Number 0  1. Owner                                              2. Plant E13-1051233601               Sheet Unit I  of   2 Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                              I        FNP   I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                          Date (as agent for Alabama Power Company) 04/26/06
: 3. Work performed by                                                                 Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company Maintenance Department
(
N'A Address :         Joseph M. Farlev Nuclear Plant                            Expiration Date N/A 1 4. Identification of System CONTAINMENT SPRAY SYSTEM I
5.
(a) Applicable Construction Code:            SEE NOTE             I9   -     Edition                    Addenda,                Code Casc (b) Applicable Section XI Utilized For Repairs Or Keplace~nents,  19 -  89 Edition           N/A        Addenda,        N/A     Code Case 6, Identification of Components Repaired or Replaced and Replacement Components:
Name of            Name of            Manuiacturer          National           Other           Year       Repaired,            ASME Component         Manufacturer         Serial Number           Board       Identification        Built    Replaced, or            Code No.                                       Replacement           Stamped (Yes / No)
HYD SNUBBER           GRINNELL                  15759             N 'A            FN1'-222          1977      IZEPL AC bI)            NO l l Y D SNUBBER        GRINNELL                 26729T             Pi A             10323            1082   RkI'LA( L M E h T          NO
: 7. Description of Work REPLACEMENT SNUBBER CSR294 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REF TRANSACTION NUMBER g001(,
MED ON REPLACEMENT SNUBBER Hydrostatic         Pneumatic         Normal Operating Pressure         None          Other Pressure             PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 I ~ T Y ~:C~ 1.52 As required by the provisions of the ASME Codc Section XI Job Kumber E13-1051233601               Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SlJPPORTS BUI1.T TOAISC-1969 AND WELDED 1.0 AWS D l .I-86.
Certificate of Compliance We certify that the statements made in the report ore correct and this                 replacement                 conforms to the rilles of'thc ASME Code. Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NIA I
Certificate of                                                 NIA                        Exp~rat~onDate Maintenance Manager       Date     7 1l~ / 6 6 Owner or Owner's Designee, Titlc II, the undersigned, holding a Certificate of Inservice Inspection d commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                                                                               of have inspected the components described in this Owner's Report during &e period             % 21, ZaDB                     to                  19. W b L                 . and state that to the best of my knowIedge and belief, the Owner has pefformed examinations                           rredive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his elnployer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Comn~issions     R/AV                  kkJ  //
National Board,'State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                  I I T : ~ 1~. 5
                                                                                                                                           ~  2 As required by the provisions of the ASME Code Section XI Job Number 1                                                                                         E13-1051239101           Sheet   I   of    2 I. Owner                                               2. Plant                                                   Unit Southern Nuclear Operating Company                            Farley Nuclear Plant Highway 95 South                                 FNP     I 40 Inverness Center Parkway                                                                             r Birmingham, Alabama 35242                                      Columbia, Alabama 36319                    Date (as agent for Alabama Power Company) 05/0 1 106
: 3. Work performed by                                                               Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Companv Maintenance Department Authorization Number N/A Address :          Joseph M. Farley Nuclear Plant                          Expiration Date N/A
: 4. Identification of System CONTAINMENT SPRAY SYSTElM
                                                                                                                                            \
5.
(a) Applicable Construction Code:            SEE XOTE             19   - Edition                    Addenda,              Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19   -89 Edition         N!A      Addenda,      N/A     Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of            Manufacturer          National         Other          Year      Repaired,          ASME I
6    Component tIY D SNUBBER Manufacturer CiRIhNELL Serial Number 24067 Board No.
NfA Identification QP-1470 Ruilt I987 Replaced, o r Replacement KbPI.AC'ED Code Stamped (Yes / No)
N0 I
HYDSNUBBER             GRINVELL                   1107             N 'A           20825          1983   REPLAC'I,MF,NT            N0
: 7. Description of Work REPLACEMENT SNUBBER CSRIGSB WAS REBUILT PKE-OUTAGE TO MEET SCHEDULE REF 'TRANSACTION NUMBER 8')31,I VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
   . Test Conducted Hydrostatic        Pneumatic          Normal Operating Pressure       None    [XI Other I            Pressure            PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               RTypc : L1.52 As required by thc provisions of the ASME Codc Section XI Job Number E13-1051239101            Sheet     2 of     2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SUPPORTS BUILT TO AISC-1969 AND WELDED '1'0          AWS 111.1-86.
I                                                         Certificate of Compliance                                                                I We certify that the statements made jn the report are correct and this ASME Code, Section XI.
Type Code Symbol Stamp Certificate of Authorization Number Signed N/A Owner or Owner's Designee. Title replacement repair or replacelnent N1.4 Maintenance Manager Expiration Date Date conforms to the rilles of the I
I                                                  Certificate of Inservice Inspection                                                             I I, the undersigned, holding         id commission issued by the National Board of Boiler and Pressure Vessel Illspectors and the State or Province of                                      and employed by                          ,%~&LT                                            of 9     Cr                                                   have inspected the components described in this Owner's Report during the pgriod                        t/.ZCtTd           to            L V W , Z006;                  , and state that to the best of my knowledge and belief, the Owner has per6rmed examinations arid takedcorredive measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspeclor nor his employer makes any warranty, expressed or in~plied,concerning the examinations arid corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.

Form NIS-2 Owner's Report for Repairs or Replacements                                                                      I ~ T Y ~: C~  1.52 As required by t h e provisions o f the ASME Code Section XI Job Number rn  1. Owner                                               2. Plant E13-1061034101                Sheet Unit I     of   2 Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                                          FNP       I Birmingham, Alabama 35242                                       Columbia, Alabama 36319                            Date (as agent for Alabama Power Company)
OS!O I i00
: 3. Work performed by                                                               Type Code Symbol Stamp N/A Name : Southern Nilclear Operstine Company Maintenance Department
[
N/A Address :             Joseph M. Farley Nuclear Plant                         Expiration Date NIA I 4. Identification of System CONTAINMENT SPRAY SYSTEM 5.
(a) Applicable Construction Code:             SEE NOTE            19  - Edition                       Addenda.                      Codc Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19  - 89 Edition         N:A        Addenda,            NiA       Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Manufacturer        National         Other             Year Built     Repaired,              ASME Component           Manufacturer          Serial Number         Board       Identification                     Replaced, o r              Code No.                                           Replacement             Stamped (Yes I No)
HYD SNUBBFll            GRlNNELL                24070             N .4            20825               I087        REI'IAE'tD                 NO NYD SNUBBER             GRINNELL                 3535              NpA           QP- 1470             1983      1lEPLAC'I:M t NT              NO
: 7. Description of Work I REPLACEMENT SNUBBER CSRIGSA WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF. TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
   . Test Conducted Hydrostatic           Pneumatic        iVormal Operating Pressure      None           Otlrer I           Pressure               PSI Temperature              OF

Form NIS-2 Owner's Report for Repairs or Replacements                         -                                                        RType : L1.52 As required by the provisions of the ASMECodc section XI Job Number E13-1061034101              Sheet     2   of   2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SUPPORTS BIJILT 'TO AISC-1969 AND WELDED TO AWS Dl , 1 4 6 .
Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement                  conforms to the t.ules of the ASME Code, Section XI.                                                          repair or replacc~nent Type Code Symbol Stamp                                                                 N/A I Certificate of Authorization Number                             N/A                        Expiration Date                    N/A                   1 Signed                                                                 Maintenance Manager       Date     7   f 11 0 /
Owner or Owner's Desienee. Title I                                                   Certificate of Inservice Inspection 1 Inspectors and the State I
of have inspected the conlponents described
                                                                                                                                    , and state that ures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall b e liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
                                                                   ~ornmissions     t/867                   ,+A// I National Board, Stite, ~'rovince,and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RTYPC :L1.52 As required by the provisions of the ASME Code Section XI Job Number                      I                     1
: 1. Owner                                                   2. Plant I        E21 - 1040289801           Sheet 1 of 2 Unit Southern Nuclear Operating Company                                   Farley Nuclear Plant 40 Inverness Center Parkway                                          Highway 95 South                                     FNP    1 Birmingham, Alabama 35242                                            Columbia, Alabama 36319                         Date (as agent for Alabama Power Company)(
March 23, 2005 1 3. w o r k performed by                                                                     Type Code Symbol Stamp NIA N a m e : Southern Nuclear Operatine Companv Maintenance Department Authorization Number NIA Address :             Joseph  M.Farlev Nuclear Plant                                 Expiration Date NIA
: 4. Identification of System Charging System (a) Applicable Construction Code:            A S M E Section It[,
(b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19
                                                                              - 68 Edition 89 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
N/A N/ A Addenda, Addenda, N/A NIA Code Case Code Case II Name of               Name of            Manufacturer             National              Other           Year      Repaired,        ASME Component           Manufacturer           Serial Number             Board           Identification       Built    Replaced, o r      Code No.                                         Replacement      Stamped (Yes 1 No)
Disc                  Velan               UNKNOWN
* N/A         F'NP Purchase Order     1973       Replaced          No FNP2 Disc                  Velan                   7830                 NIA         FNP Purchase Order      2004     Replacement'       Yes QP040709
: 7. Description of Work The disc in the 1A Charging Pump Discharge Check Valve (QlE21V0122A) was replaced with a11 upgraded disc to preclude the failure of the check valve seat and anti-rotation nubs. This was a result of the root cause corrective aclion from CR 2004002293. RER 1040560501 provided the reconciliation for the new disc. (Ref: Transaction Number 58281)
: 8. Test Conducted rn    Hydrostatic          Pneumatic [XJ Normal Operating Pressure                   None     C] Other Pressure                PSI Temperature                  OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                                ~ ~ y :pL1.52 e
As rcquired by the provisions of the ASME Code Section XI Job Number                             I                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E2 1 - 1040290801                 Sheet 2 of 2 Since the original valve was manufactured to the 1968 Draft Pump and Valve Code, no data report was suppl~ed,and the original disc serial number is unknown.
The serial number for the complete valve is 209 as identified on the Qual~tvRelease siiuolted bv Westin~houseat the tirnc of installation.
(
ASME Code, Section XI.
Type Code Symbol Stamp Certificate of Authorization Number Signed Certificate of Compliance We certify that the statements made in the report are correct and this NIA Owner or Owner's 13esignee, Title replacement repair or replacemenr NIA Expiration Date Maintenance Manager- Date                  7/
                                                                                                                                 '/o    (
NIA 1
conforms to the rules of the I
Certificate of Inservice Inspection I, the undersigned, holdin          valid commission issued by the National Board of Boi!er and Pressure Vesscl Inspectors and the State or Province of -                   /                      and employed by                   545W                                                               of
                                          , G7                                             IY                   have inspected the components dewrihed in this Owner's Report during the period                            p&                        to                                                , and state that to the best of my knowledge and belief, the Owner has pdformed examinations                                    cgrrective measures described in this Owner's ~ e ~ oin ;accordance with the requirements o i t h e ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions            7                 &                  !            !             @
National Board, State, Province, and Endorsements Date      d-&~/p, &27&
                   /

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*
: 1. Manufactured and certified by              VELAN INC., 2125 WARD AVE., MONTREAL., QUEfbCC, CA (name andaddress d NPT Cerbficatehclder)         LY
: 2. Manufactured for ALABAMA POWER COMPANY CIO SOUTHERN NUCLEAR OIP BOX 1295 BIRMINGHAM AL 3c201 USA (name and address of Purchaser)
: 3. Location of installation             FARLEY NUCLEAR PLANT HIGHWAY 95 SOUTH COLUMBIA AL 36319 USA (name and address)
: 4. Type:               78431 REV.C                      SA-182 F316                 75,000PSI                      NIA                             2004 (drawmg no.)                 [mllspec. m.)                  (lensle suenglh)         (CRNI                        (year bull11
: 5. ASME Code. Section Ill, Division 1:                 1971                            SUMMER-1971                       1         -                   NIA fed~tiar)                             (addenda date)           (class)                       (Code Case no )
: 6. Fabricated in accordance with Const. Spec. (Div. 2 only)                     NIA                     Revision NIA             Date     NIA (M.)
: 7. Remarks: DISCS HEAT NUMBER: 74244 Test No. 60139 (HIF: ALLOY-40)
SPARE PART FOR 3" 1500# BOLTED COVER STAINLESS STEELSWING CHECK VALVE; WID: 3C88 8 . Nom. thickness (in.) N/A Min. design thickness (in.) N/A                                 Dia. ID (ft & in.) NJA          Length overall (ft B In.) NIA 9 When appl~cable,Cert~ficateHolders' Data Reports are attached for each item of thls report Part or appurtenance                      Nabonal Board No. In                                 Part or appurtenance               National Board No ~n Ser~alNumber                             Numerical Order                                         Senal Number                      Nurner~calOrder (26)                                                                ,.
(27) 128)   ,
(29)
(30)
(31 (32)
                                                                                             , (33)
(34)
(35)
(36)
(37)
(38)
(39)
(40)
(41)
(42)
(43)
(44)
(45)
(46)
(47)
(48)
(49)
(50)
: 10. Design pressure NIA psi. Temp.N/A"F.                             Hydro test pressure NIA at temp."F Operating Condition: 2500 at 650 F
'Supplemental m n f m h o n In the fmof Bsts, sketchas, or drawinw m y bo used pw&d (1) clze Is 8% x 11, (2) infonnaCon In I @ ~ 2S and 3 on thls Data Report a included on each sheet. (3) each sheet IS numbered and the number d W Q is recordedat the lop of Ws form This fonn ( E W )may ba obWnd frwn the Order Dept.,ASME, ZZ Law Drive. 00x2300, Fairfield. N J 07007-2300.

FORM N-2 (Back     - Pg.2 OF 2           )
Certificate Holder's Serial Nos. 7827,7830 through -. 783 7  Des~gnspecifications cemfred by
(*
NIA applicabk)
CERTIFICATION OF DESIGN P.E.State N/A               Regno          N/A       S-Q420$2                                  -
Oes~gnreport* cert~fiedby 8 MA                           P E State NIA               Reg no N/A (whenappltcable)
I  We certify that the statements made in this reporf are correct and that this (these) 3"-1500#SWING CHECK VALVE DISCS conforms to the rules of constructionof the ASME Code, Section HI, Division 1.
NPT Certificate of Authorization No. N-2798-2                  Expires APRIL 20,207 1                                                                  -
Dale    8 NOV. 2004          Name         VELAN INC.                     Signed (NPT CelllficateWdm)                                             (AumcnreQRepewnbliw)
CERTIFICATE OF INSPECTION i
I, the undersigned, holding a valid cammission issued by the National Board and Pressure Vessel Ins                         rs and the State or Province of Quebec       and employed by               REGlE DU BATIMENT DU QUEBEC                    1 of Quebec have inspected these items described in this Data Report on f l m b m b r /O and state that to the best af my knowledge and belief, the Certificate Holder has fabricated these palts or appurtenances in accordance with the ASME Code. Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.
By signing this cerlificate, neit                                        makes any warranty, expressed or implied, wncerning the equipment described in this Data Report.                                           nor his employer shall be liable in any manner for any personal injuq or property damage or loss of an
                                                                                       .,                  J.-P.FACliINElTl QC               13813 Commissions
[Nan. Ed. (ind. endorreawn&) and saw IX prw. an no.
fl

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           RType : L 1.52 As required by the provisions of the ASME Code Scction XI Job Number                  I                      I
: 1. Owner Southern Nuclear Operating Company
: 2. Plant E
Fariey Nuclear Plant Sheet Unit 1   of    2 40 Inverness Center Parkway Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319 IDate  FNP    1 (as agent for Alabama Power Companj I
May 7.2005
: 3. Work performed by                                                                       Type Code Symbol Stamp N/A Name : Southern Nuclear O~eratingCompany Maintenance Department Authorization Number N/A Address :             Joseph M. Farlev Nuclear Plant                                 Expiration Date
: 4. Identification of System Charging System 5.
(a) Applicable Construction Code:             ASME Swtion 111,          19 -  68 Edition          No       Addenda.      NIA     Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,        19 2-       Edition        NIA      Addenda.      N/A     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of               Name of             Manufacturer            National             Other         Year      Repaired,        ASME Component           Manufacturer            Serial Number            Board         Identification      Built   Replaced, o r       Code No.                                     Replacement       Stamped (Yes / No:
Disc                  Velnn               UNKNOWNf                 NIA        FNP Purchase Order    1973      Replaced          Y cs FNP2 Disc                  Velan                   7828                 N/A        FNP Purchase Ordcr    2002    Rcplace~nent        Yes OPOj0709
: 7. Description of Work The disc in the 1C Charging Pump Discharge Check Valve (QlE21 V0122Cj was replaced with an upgraded disc to preclude the failure of the check valve seat and anti-rotation nubs. This was a result of the root cause comctiue action from CR 2004002293. RER I W0560501 provided the reconciliation for the new disc. (lief: Transaction Number 597521
: 8. Test Conducted C] Hydrostatic             Pneumatic          Normal Operating Pressure             None    C] Other Pressure                PSI Temperature                 O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                           RTYPC: L1.52 As  required by thc provision^ of the ASME Code Section XI Job Number                             I                       1 0,  9. Remarks (Applicable
                       --          Manufacturer's Data Reports to he attached)
I         E2 1 - 1040290201 Sheet 2      of 2
* Since the original valve was manufactured to the 1968 D& Pump and Vdvc Code. no data rcpon was supplied, and the otigina1disc serial number is unknown.
L Certificate of Compliance We cenify that the statements made in the report are correct and this                     replaccmcnt                        conronns to the rules of the ASME Cods. Section XI.                                                            repair or replacement Type Code Symbol Stamp                                            -       -                NIA         -                                                  --
Certificale of Authorization Number                             NIA                           Expiration Date                          NlA Signed           /%%%V-                                                Maintenance Manager          Date           S[LL'OJ-Owner or Owner's Designee. Title I I, the undersigned. holdin Certificate of Inservice Inspection atid commission issued by the National Board oi'Boiler and Pressure Vesscl Inspectors and the Stale or Province of                                                                       HS&CT-                                                               oT have inspected the components described
                                                                      -6         - Lo             Y          /.&                              . and slate that to thc best of my knowledge and belief, t h e T ? a s $ c r f o r m e d e i a m i n a t i o n s ~ c o f r e z " , e a s u r e s     desribcd in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certif cate neither h e Inspector nor his employer rnakcs any warranty, expressed or implied. concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
omm missions        R/ g T               &jf/
National Board. Stak, Province, and Endorsements

 ..                                    FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*
Not to Exceed One Day's Production
(-me and .<dress of Purctleser!
: 3. Location of installation           FARLEY NUCLEAR PLANT HIGHWAY 95 SOUTH COLUMBIA AL 36319 USA (name and abdress)
: 4. Type:             78431 REV.C I                        SA-18;      F316            75,000 PSI                           N/A                            2001 (draGng no.)                 7iGiEZ57                       (tensile s!renglFi)            ((5RN:                       (.par aud!]
: 5. ASME Code, Section Ill, Division 1:              197U                            SUMMER-1971                             I                             N/A (edlbon)                               (addenda dale)                (class)                       (Code Case no )
: 6. Fabricated in accordance with Const. Spec. (Div. 2 only)                  N!A                       Rev~sion N/A                 Date     N/A (no.)
i
: 7. Remarks: DISCS HEAT NUMBER: 74244Sesl No. 60139 (HIF: ALLOY-40)
SPARE PART FOR 3" BOLTED COVER STAINLESS STEELSWING CHECK VALVE
: 8. Nom. thickness (in.) N/A Min. design thickness (in.) NIA                                Dia. ID (ft & in.) N/A                Length overall (ft 8 in.) N/A
: 9. When applicable, Certificate Holders' Data Re'brts are attached for each item of this report:
Part or appurtenance                    National Board No. in                                 Part or appurtenance                   National Board No. in Serial Number                           Numerical Order                                         Serial Number                       Numerical Order
                                       /
(1)       DISC SN: 7828/                               NIA                                (26)
(2)        DISC SN: 7829                               NfA                                (27)
(3)                                                                                       (28)
(4)                                                                                       (29)
(5 (6)
(30)
(31)
(7)                                                                                       (32)
(8)                                                                                       (33)
(9)                                                                                       (34)
(10)                                                                                        (35)
(1 1)
(12)
(36)
(37)                                   A                                      -
(13)                                                                                                                               f (38)
(14)
(15)
                                                                                   -            (39)
(40)
(16)                                                                                        (41)
(17)                                                                                        (42)
(18)                                                                                        (43)
(19)                                                                                        (44)
(20)                                                                                        (45)
(21                                                                                         (46)
(22)                                                                                        (47)
(23)                                                                                        (48)
(24)                                                                                        (49)                                   I (25)                                                                                         (50) 0' 1 0 Design pressure            2500 MAX psi. Temp. 650                 O f . Hldro test pressure NIP at iempPOF 1                                        1
  'Supplemental Intomtion in the form of lists, sketches.ofd r a w s may be used provided (1) size is 8% x 11. (2)informalion in i l m 2 and 3 on th~sDara Report is mduded on each sheel. (3) each sheat is numbered and the number of sheets is recorded a! the top d this fonn.
(12188)                                                This form (00040)   may be obtained   (rwn the   Order Dept.. ASME. 22 Law Drive. Box2300. Fairlield. NJ 67007-2300

FORM N-2 (Back - Pg. 2 OF 2 )
S ,0 4 2 0 75                                      Certificate Holder's Serial Nos                      7829 through 7829 f '
Deslgn specifications certified by    NIA
( M e n applicabe)
CERTIFICATION OF DESIGN P.E.State NIA    --
1 Design repori' certified by   NIA                        P.E.State  NIA            Reg.no N/A      -
(when applicable)
I                                                            CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) 3"-1500# SWING CHECK VALVE DISCS conforms to the rilles of construction of the ASME Code. Section Ill. Division 1.
NPT Certificate of Authonzatron No N-2798-2 Dale 25 OCTOBER 2004                Name             VELAN-INC Exptres APRIL 20, 2007                     '
(nC
                                                                                                              /I                      n                 --
k (NPT CerD6flcsle tidam)                                            IhLTwzffi Reixesentauve:
Quebec      and employed by
                                                                                                            ~ G I DU EB              Aou Q U ~ B E C Commissions              -
(Ngl7. Bd. (ind. endorsements)and sale a p o v , and m.1

Form NIS-2 Owner's Report for Repairs or Replacements                                                                  R T ~ P:~ 1 . 5 2 As requircd by the provisions of the ASME Code Section XI 1 Job Number                   I                       I 1 1. Owner                                             12. Plant I        E21-1051229301          Sheet 1 of 2 Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South Birmingham, Alabama 35242                                      Columbia, Alabama 36319 (as agent for Alabama Power Company)
I                                                        I
: 3. Work performed by                                                               Type Code Symbol Stamp N/A Name : Southern Nuclear Oaeratine Company Maintenance Department Authorization Number N/A Address :          Joseph M. Farlev Nuclear Plant                           Expiration Date N/A I  4. Identification of System R H R n O W HEAD SAFETY INJECTION SYSTEM I
(a) Applicable Construction Code:            SEE NOTE             19 - Edition                      Addenda.             Code Case (b) Applicable Section XI Utilized For Rcpairs Or Replacements. 19 89 Edition           NIA       Addenda,      N/A    Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of            Name of              manufacturer         National          Other          Year       Repaired,       ASME Component         Manufacturer           Serial Number          Board       Identification      Built    Replaced, o r      Code No.                                     Replacement      Stamped (Yes / No)
FIYD SNUBBER          GKINNELL                  12049             NIA            FNP-222          1977      KEPLACBO           KO HYD SNUBBER           GRINNELL                  13918             hIA             10825           1983   REPLACHMEYT           NO
: 7. Descriotion of Work REPLACEMENT SNUBBER C V C S K SWAS        ~     REBUILT PKE-OUTAGE TO MEET SCHEDULE: REFERENCE TRANSACTION NUMBER ERFOKMED ON REPLACEMENT SNUBBER I           Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure "F
None         Other

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType : L1.52 As required by the provisions of the ASME Code Section XI Job Number E21-1051229301            Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SUPPORTS DESIGNED T O AICS- 1969 AND WELDED TO AWS D 1.1-86.
Certificate of Compliance We certify that the statcrnents made in the rcport are correct and this                  replacement               conforms lo the rules of the ASME Code, Section XI.                                                           repair or replacement Type Code Symbol Stamp                        -                                          N/A I Cenificate of Authorization Number                              N/A                        Expiration Date                  N/A                   I Signed                                                                 Maintenance Manager       Date    7/I   y/o 6 Owner or Owner's Designee. Title Certificate of Inservice Inspection I, the undersigned, holding        lid commission issued by the                        of Bo~lerand Pressure Vessel Inspectors and the State or Province of                                   - and employed by                                                                             of
                                       . L-T                                                           have inspected the components described in this Owner's Report during tkE period                      a,   m G              to      -ai~f//9.    &d L                   , and state that to the best of my knowledge and belief, t h e s a s p6rformed e x a m i n a t i o n s ~ nedrrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, cxpressed or impl~ed,concerning the examinations and corrective measures described in this Owncr's Reporl. Furthermore, neither the Inspector nor his employer shall hc liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspect~on.

Form NIS-2 Owner's Report for Repairs or Replacements                                                                       RTypr : ~   1.52 As required by the provisions of the ASMECode section XI
                                                                                        .lob Number                    I                         I
: 1. Owner                                              2. Plant I          E21-1051230101            Sheet Unit I  of    2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                      FNP   I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                         Date (as agent for Alabama Power Company) 1 3. Work performed by                                                            I Type Code Symbol Stamp Name : Southern Nuclear Operatine Cornl~anvMaintenance Department Address :           Joseph M. Farley Nuclear Plant N;A I  4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 I9
                                                                        - Ed~tion 89     Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:
NIA Addenda, Addenda,       NIA Code Case Code Case I
I Name of            Name of             Manufacturer         National           Other            Year       Repaired,          ASME Component         Manufacturer           Serial Number         Board        Identification        Built    Replaced, or          Code KO.                                       Replacement          Stsniped (Yes / Vo)
HYD SNUBBER           GRINNPLL                  11719            N'A             tiN1'-222          1077      RCPLAC ED             KO HYD SNUBBER           GRlKNtLL                   11919            h'A               20825            1983  IltlJLAC E M ElhT         NC)
: 7. Description of Work REPLACEMEhT SNUBBER SIR62 WAS REBL'ILT PRE-OUTAGE TO MEET SCHEDULE R E F TRAUSACTlOl UUhlBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
   . Test  Conducted C]   Hydrostatic         Pneumatic          Normal Operating Pressure        None       [XJ Other I           Pressure              PSI Temperature              "F I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               HType : L1.52 As required by the provisions of the ASME Codc Section XI Job Number                       I                    I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E21-1051230101 Sheet   2   of 2 SUPPORTS BUILT 7'0AISC-1969AND WELDllD TO AWS D l . 1-86, Certificate of Compliance Wc certify that the statements made in the report are correct and this ASME Code, Section XI.
Type Code Symbol Stamp Certificate of Authorization Number Signed N/A Owner or Owner's Desi~mee.Title replacement repair or rcplacenlent NIA Mamtenance Manager Exp~rat~onDate Date    7 I
confom~sto the rules of the Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel 1nspectol.s and the State or Province of                     /                and enlployed by                  #k5&%5-                                                 of have inspected the components described
                                                                                                                                , and state that to the best of my                                                                                                     res described in this Owner's ~ e ~ oin ;accordince with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures desciibed in tl~jsOwner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal insury or property damage or loss of any kind arising from or connected with this inspection.
omm missions    &/ Rf7               MI/
National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                         K T ~ I :I Lf
                                                                                                                                              ~  .52 As requ~redby the provisions of the ASME Code Section XI Job Number                      I                             1
: 1. Owner                                               2. Plant I       E21-1051230201               Sheet Unit 1   of 2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                        FUP     I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                         Date (as agent for Alabama Power Company) 05/02/06
: 3. Work performed by                                                                Type Code Symbol Stamp WA Name : Southern Nuclear Operating Comuanv Maintenance Deuartment Authorization Number Address :           Joseph M. Farlev Nuclear Plant                            Expiration Date
: 4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM 5.
I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 10 19 Edition 89 Edition          N/ A Addenda, Addenda,          NfA Code Casc Code Case I
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of            Name of             Manufacturer          National          Other         Year       Repaired,               ASME Component         Manufacturer           Serial Number          Board       Identification     Built    Replaced, o r               Code No.                                    Replacement              Stamped (Yes 1 No)
HYD SNUBBER           GRINNELL                  100 10            N:A            FNP-222         1977      REPI.AC'ED                   NO HYD SNUBBER           GRINNELL                   15517             NIA            FNP-222         1977   K1 P I A C E M E N 'I          NO
: 7. Descri~tionof Work I REPLACEMENT SNUBBER CVCR2G4 WAS REBUl LT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER 0()4')2
   . Test Conducted Hydrostatic     C] Pneumatic            Normal Operating Pressure  C] None [XI Other I          Pressure               PSI   Temperatr~re           O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                   HTypr : L1.52 As required by the provisions of the ASMECode section XI Job Number                         I                      3
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E21-1051230201                 Sheet   2   of 2 SUPPORTS BUII-T TO AISC-1969 AND WELDED 1'0 AWS D l . 1-86, I
I                                                            Certificate of Compliance                                                                 I We certify that the statements made in the report are correct and this ASME Code, Section XI.
Type Code Symbol Stamp Certificate of Authorization Number Signed Rd 3
N/A Owner or Owner's Designee, Titlc replacement repair or replacement N/A Expiration Date Maintenance Manager Date             7 1h conforms to the rules of the NIA I
Certificate of lnservice lnspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the Stale or Province of                  R/                  and employed by                /G,B C=       r                                                of
                     .                    Cr                                                           have inspected the components described in this Owner's Report duringhe period               & f l 1 2 / .     -6            to                                             , and state that to the best of nly knowledge and belief, the Owner has peTformed examimtions Owner's ~ e ~ oinr accordance f          with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Co~nmissions   & fn National ~oard,'Stat'e, Province, and Endorsements Date        ~ L V Mm          ~,76
                    /

Form NIS-2 Owner's Report for Repairs or Replacements                                                                   I<Typr : L 1.52 As required by the provisions of the ASME Code Section XI Job Number                    I                          1
: 1. Owner                                                2. Plant I       E21-1051231301            Sheet Unit I  of 2 Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                  FNP    I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                      Date (as agent for Alabama Power Company) 04/26/06
: 3. Work performed by                                                                Type Code Symbol Stamp N/A Name : Southern N~~clear    Operating Company Maintenance Deuartment Authorization Number N!A Address :          Joseph M. Farlev Nuclear Plant                           Expiration Date N /A 1 4. 1dentifiAtion of System HIGH HEAD SAFETY INJECTIONJCVCS SYSTEM I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacenients, I9 19 Ed~tion 89 Edition
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
NiA Addenda, Addenda.      N.'.4 Code Cast C'ode C : ~ S C I
Name of             Name of            Manufacturer          National         Other          Year       Repaired,          ASME Component          Manufacturer          Serial Number          Board       Identification     Built    Replaced, o r         Code No.                                    Replacen~erlt       Stamped (YesI No)
FIYD.SNUBBER           GRINNE1.L                1 1 182           N?'A           FNP-222          1070     KEI~l.ACED             NO HYD.SNUBBER           GRINNELI.                 1021 1            WjA             20825          1081   KEI'LAC'IMENT            NO t 7. Descriotion of Work                                                                                                                      I I  REPLACEMENT SNUBBER SIRGSWAS REBUILT PRE-OUTAGE TO MEET SCHEDULE. REF: TRANSACTION NUMBER VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER.
    . Test Conductecl Hydrostatic         Pneumatic         Normal Operating Pressure       None     a   Other I            Pressure             PSI Temperature               OF I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               n.rypc : 1,1.52 As required by the provisions of the ASME Code Section XI Job Number                       I                       I
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I        E21-1051231301 Sheet 2 o l 2 SIJPPOR'TS RIJI 1.I' TO AISC-1969 AND WELDED 1.0 A W S D 1.1-86.
Certificate of Compliance We certify that the statements made ~nthe report are correct and th~s                 replacement                 conforms to the rules ofthe ASME Code. Section XI                                                          repalr or replacement Type Code Symbol Stamp                                                                NIA Certificate of Authorization Number                           N/A                        Expiration Date b2J Signed                                                              Maintenance Manager         Date Owncr or O\vner3sDesignee. Title Certificate of Inservice Inspection tional Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                                                         Awd~7-                                                 of have inspected the components described in this Owner's Report during the period      A,           $/,                    to Zi%LL/;I/,W               C                , and state that to the best of my knowledge and belief, the Owner has derformed examinations and taken co'rrective measures described in this Owner's Report in accordance with the requirements of the ASME Code. Section XI.
By signing this certificate neither the Inspector nor his enlployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore. neither the Inspector nor his employel. shall be liable in any manner for any personal injury or property damage or loss of any kind arising from orcorlneuted wit11 tjlis-inspection.
Com~n~ssions       A/ BX7            @//
flnspector's Signature                                                National Board, State. Province, and Endorsements 1Date          ~ & L L / . ~%     /J

Form NIS-2 Owner's Report for Repairs or Replacements                                                                     HType : ~  1.52 As required by thc provisions of the ASME Code Section XI Job Number                     I                        I
: 1. Owner                                               2. Plant I         E21-1051231501            Sheet 1 of 2 Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inveraess Center Parktva?:
Birmingham, Alabama 35242 Highway 95 South Columbia, Alabama 36319                       Date FNP   I (as agent for Alabama Power Company) 04/2G/O6
: 3. Work performed by                                                                Type Code Symbol Stamp N/A I      Name : Southern Nuclear Operatine Companv Maintenance Department Authorization Number N /A I       Address :           Joseph M. Farlev Nuclear Plant
: 4. Identification of System I
Expiration Date NlA HIGH HEAD SAFETY INJECTIONICVCS SYSTEM I (a) Applicable Construction Code:            SEE NOTE (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 19
                                                                        - Edition
                                                                        -89 Edition 6 . Identification of Components Repaired or Replaced and Replacement Components:
NIA Addenda, Addenda,         NiA Code Case Code Case II Name of            Name of             Manutacturer          National         Other           Year     Repaired,            ASlME Component         Manufacturer           Serial Number          Board       Identification      Built  Replaced, o r           Code No.                                   Replacement           Stamped (Yes / No)
HYD SNUBBER            GRINNFLL                  11641             N/A           I-N1'-222        1977     I<kI'l.AC tl)           h0 HYD SNUBBER           GRINNELL                   14678             N/A             20825          1983  KLI'LAC E M t N T         h0
: 7. Description of Work REPLACEMENT SNUBBER CVCRl52 WAS REBUILT PRE-OUrAGE: TO MEET SCHEDULE REF TRANSACTION NUMBER 90)87 VT-3 WAS PERFORMED ON REPLACEMENT SNUBBER
  . Test  Conducted I          Hydrostatic Pressure 0 Pneumatic PSI   Temperature Normal Operating Pressure "F
0None          @ Other

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                 ItTypr:   ~1.52 As required by the provisions of the ASME Code section X [
                                                                                           / Job Number                       I                      1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I       E21-1051231501               Sheet    2   of 2 SUPPORTS HLIILT TO AISC-1969 AND Wiil.DEDTO AWS D1.l-86.
I                                                         Certificate of Compliance                                                                  I 1
We certify that the statements made in the report are correct and this                 replacement                  confor~nsto the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 N /A Certificate of Authorization Number                            N/A                        Expiral~onDate                     N!A SignedId          &
3
                    /                 Owner or Owner's Designee, Title Maintenance Manager       Date    7//    %lo I
6 Certificate of Inservice Inspection I, the undersigned, holding a          commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                                                                              of
                                           &T" I C T                                                have inspected the components described in this Owner's Report during the period       a,            &,            6       to       dULY 2 / , Z o b b                    , and state that to the best of my knowledge and belief, the Owner has peTfornled examinations and tak& cordctive measures described in this Owner's ~ e ~ oinr accordance
                        ;           with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions     ,& n 7 mu Lt/nspector's Signature                                                National Board, State. Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code section XI
)    1. Owner                                              12. Plant I        E21-1051236201           Sheet   1 of    2     I 1          Southern Nuclear Operating Company                             Farley Nuclear Plant I
40 Inverness Center Parkway                                    Highway 95 South                                  FNP    I Birmingham, Alabama 35242                                      Columbia, Alabama 36319                     Date (as agent for Alabama Power Company                                                                               04/24/06 I
: 3. Work performed by                                                              Type Code Symbol Stamp NIA Name : Southern Nuclear Operating Com~anvMaintenance Department Authorization Number Address :           J o s e ~ bM. Farlev Nuclear Plant                      Expiration Date I
: 4. Identification of System HIGH HEAD SAFETY INJECTION/CVCS SYSTEM I                                                                                                                                            I (a) Applicable Construction Code:            SEE NOTE             19 - Edition                      Addenda,               Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19 & Edition            NIA       Addenda,      N/A      Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of              Manufacturer         National         Other            Year      Repaired,         ASME Component         Manufacturer           Serial Number          Board       Identification      Built    Replaced, o r        Code No.                                     Replacement        Stamped (Yes I No)
HYD SNURBbR           GRlNNELL                  12069             NIA           FNP-222           1977      REPL.ACEI1           NO HYD SNUBBER            GRINNkLL                  19016             NIA           FNP2-29           1981   REPLAChMENT             NO
: 7. Description of Work REPLACEMENT SNUBBER CVCK447 WAS REBUILT PRE-OUTAGE TO MEET SCHEDULE REFERENCE TRANSACTION NUMBER ERFORMED ON REPLACEMENT SNUBBER 17 Hydrostatic           Pneumatic          Normal Operating Pressure       None         Other Pressure              PSI Temperature               OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                  RType :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                        1                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         E21-1051236201              Sheet 2 of 2 SUPPORTS DESIGNED T O AICS-1969 AND WELDED TO AWS D l .I-86.
Certificate of Compliance We certify that the statements made i n the report are correct and this                  replacement                 conforms to the rules of the ASME Code, Section XI.                                                           repair or replaccrnent Type Code Symbol Stamp                                                                   N/A
( Certificate of Authorization Number                             NIA                         Expiration Date                     N/A                 I I  Signed Owner or Owner's Designee. Title Maintenance Manager        Date     7/(v/     04 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and thc State or Province of                &?I                    and employed by                                                                         of CT                                                          have inspected the components described in this Owner's Report during t6e period          a       %/, w ~ L                  to                  /?. 2 0 0 6               , and state that to the best of my knowledge and belief, the Owner hadperformed examinations                              rrechve measures described in [his Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neithcr the Inspector nor his employer shall be liable in any manner for any persona1 injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions        R/
National Board, Slate, Province, and Endorsements Date        g&v/4if        -zaPG
                   /    '

Form NIS-2 Owner's Report for Repairs or Replacements                                                                ~ ~ y :pL1.52 e
As required by the provisions of the ASME Code Section XI IJob Number                    I                     1 E21-1051238401 Sheet 1 of 2 Southern Nuclear Operating Company 40 Inverness Center Parkway Farley Nuclear Plant Highway 95 South                         I      FNP 1 Birmingham, Alabama 35242                                     Columbia, Alabama 36319 (as agent for Alabama Power Company)
I                                                       I
: 3. Work performed by                                                              Type Code Symbol Stamp NIA Name : Southern Nuclear Overatinr Com~anyMaintenance Department 7                        N/A Address :           Joseph M. Farlev Nuclear Plant                          Expiration Date N/A
: 4. Identification of System HIGH HEAD SAFETY INJECTIONICVCS SYSTEM (a) Applicable Construction Code:            SEE NOTE            19  - Edition                      Addenda,           Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,  19  89    Mition         NIA       Addenda,     N1.4  Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of             Name of            Manufacturer         National         Other           Year      Repaired,      ASME Component           Manufacturer        Serial Number          Board       Identification      Built   Replaced, or      Code No.                                    Replacement     Stamped (Yes1 No)
MECH               PAClFlC                  38381            N/A           QP-2244           1981     REPLACED         NO SNUBBER             SCIENTIFIC HYD SNUBBER             LISEGA               30500420/013         NIA           QP050939         2004   REPLACEMENT         NO
: 7. Description of Work SNUBBER SS-2954 B WAS REPLACED AS A SCHEDULED UPGRADE. REF. TRANSACTION NUMBER 90896 VT-3 PERFORMED ON REPLACEMENT SNUBBER C]   Hydrostatic    C]   Pneumatic C] Normal Operating Pressure        C]  None          Other Pressure              PSI Temperature              "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                R T Y:~L1.52 As required by the provisions of the ASME Code Section XI Job Number E21-1051238401              Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
SUPPORTS DESIGNED TO AICS-1969 AND WELDED TO AWS D1.l-86.
REFERENCE EQUIVALENCY DETERMLNATION (LED) 96-0-022.5. REV. I I                                                         Certificate of Compliance We certify that the statements made in the report are correct and this ASME Code, Section XI.
replacement repair or replacement conforms to the rules of the I
Type Code Symbol Stamp                                                                 N/A Certificate of Authorization Number                            N/A                       Expiration Date
           ~4 Signed                  (~~/L                                          Maintenance Manager       Date Owner or Owner's I)esignec, litle Certificate of Inservice Inspection issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                                      and employed by                &&a-                                                        of have inspected the components described in this Owner's Report durindthe period        s.             Z/ -4 6 to the best of my knowledge and belief, the Owner has pcrfbrmed
                                                                                                                                 , and state that described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o r propcrty damage or loss of any kind arising liom or connecled with this inspection.
Commissions      an7                     //
spector's Signaturc                                               National ~oard,spite. Province, and Endorsements Dale       Zw/q,               2.066

Form NIS-2 Owner's Report for Repairs or Replacements                                                                            KType :L1.52 As required by the provisions of the ASME Code Section XI Job Number F15 - 1060919901            Sheet 1 of 2
: 1. Owner                                               2. Plant                                                          Unit Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                               r      FNP    1      a Birmingham, Alabama 35242                                       Columbia, Alabama 36319                          Date (as agent for Alabama Power Company:
May 19,2006
: 3. Work performed by                                                                   Type Code Symbol Stamp N/A Name : Southern Nuclear Operatine Comaany Maintenance Department Authorization Number N/ A Address :           Joseph M. Farlev Nuclear Plant                              Expiration Date N/A
: 4. Identification of System Refueling Water Storage Tank 5.
(a) Applicable Construction Code:         ASME Section 111,       19   - 71 Edition         Winter 1971   Addenda.               Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,   19   89 Edition               NtA       Addenda,       NtA     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of            Manufacturer          National              Other            Year      Repaired,        ASME I
Component         Manufacturer          Serial Number           Board           Identification         Built  Replaced, or        Code No.                                         Replacement       Stamped (Yes I No)
Hex Head Bolts   Texas Bolt Company           8 15772             N/A               FNP303             1974       Replnced          Xo Hex Head Bolts     Standard Nut and           22567               N/A             P . 0 83578          1981     Rcplacemenl         No Bolt Company
: 7. Description of Work Minor boron was noted on some of the bolting on the manway flange of the refueling water storage tank (Ql F16TOSOl) All bolting was replaced with new bolting. Ref Transaction Number 89239
: 8. Test Conducted I            Hydrostatic Pressure Pneumatic PSI Temperature Normal Operating Pressure O F None           Other

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType : L1.52 As required by the provisions of the ASME Code section XI Job Number F15 - 1060919901             Sheet 2 of       2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Certificate of Compliance We certify that the statements made in the repon are correct and this                 replacement                 conforms to the rules of the ASME Code, Section XI.                                                         repair or replacement Type Code Symbol Stamp                                                                 KIA Certificate of Authorization Number                           N/A                       Expiration Date                     N/A Signed                                                                Maintenance Manager _ Date          7/7/6 Owner or Owner's Designee, Title I
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of                R/                   and employed by                 &sf=/-                                                      of k(mm, C T -                                                                       have inspected the components described in this Owner's Report duringfhe pcriod &b                 s,                                                                   . and state that to the best of my knowledge and belief, the 0 b n e r has$erformed                                             measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with [his inspection.
Commissions     #7                m//
National hhard, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                            RType : L1.52 A s required by the provisions of the ASME Code Section XI Job Number                     I                        I I             -
FIG 1060919801            Sheet     1   of   2   I 1 1.
                                                                                                                           +
Owner                                               12. Plant Southern Nuclear Operating Company                                 Farley Nuclear Plant 40 Inverness Center Parkway                                        Highway 95 South Birmingham, Alabama 35242                                          Columbia, Alabama 36319 (as agent for Alabama Power Company I
April 27.2006
: 3. Work performed by                                                                   Type Code Symbol Stamp NIA Name : Southern Nuclear Operatinp Comuanv Maintenance Department Authorization Number Address :              Joseph M. Farlev Nuclear Plant                           Expiration Date
: 4. Identification of System Refueling Water Storage Tank 5.
(a) Applicable Construction Code:            ASMB Section 111,        19   -71 Edition     Sua~nar1971    Addenda,                 Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,       19  89 Edition            NIA       Addenda,       N/A       Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
I Name of Component         I  M::zLter          I    Manufacturer Serial Number        I National Board No.
I       Other Identification Year Built Repaired, Replaced, or Replacement ASME Code Stamped (Yes / No)
Studs (13)
I Texas Bolt Company I                        I    NIA     I    7047-Q-62730                    Replaced Studs (3)           Nova Machine             96469                NIA            QP98048I                      Replaced Products Nuts (33)         Texas Boll Company           CD60                NIA          7047-Q-62730                    Replaced Studs (16)               Nova                 96469                NI A           QP98048 1                   Replacement Nuts (32)         Texas Bolt Company          0 6 0                N/A          7047-4-62730                  Replacement
: 7. Description of Work Minor boron was observed on the flange coming from the RWST to the 16" HBC-42 line. It was determined that in lieu of performing a VT-1 on he bolting, all bolting would be replaced with new bolting. Ref: Transaction Number 91060
: 8. Test Conducted Hydrostatic            Pneumatic (XI Normal Operating Pressure         [7 None           Other Presswe                 PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                               RType :L1.52 As required by the provisions of the ASME Code section XI Job Number 0   9. Remarks (Applicable Manufacturer's Data Report. to be attached)
F16 - 1060919801            Sheet 2 of       2 I                                                         Certificate of compliance                                                                I We certify that the statements made in the report are correci and this                replacement                 conforms to the rules of the ASME Code, Section XI.                                                         repair or replacement Type Code Symbol Stamp                                                                NI A Certificate of Authorization Number                            NIA                      Expiration Date Signed                                                                Maintenance Manager      Date Owner or Owner's Desienee. Title I                                                   Certificate of Inservice Inspection lid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State I
or Province of                                     and employed by                  ,&Ej&G7-                                                  of
                                        . C2-r                                                       have inspected the components described in this Owner's Report during thgperiod &L                 a     . -6             to             /3, -6                        , and state that
.)
to the best of my knowledge and belief, he d w n e r has pe/rformed examination                   c&ective mcasures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
omm missions                   /PA///
National Board, State, Province, and D
  ..            2

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           HType :L1.5:
As required b y the provisions of the ASME Code Section XI Job Number                      f
: 1. Owner                                               2. Plant I       G24- 1041981102             Sheet Unit 1   of  2 Southern Nuclear Operating Company                                Farley Nuclear Plant 40 Inverness Center Parkway                                       Highway 95 South                                     FNP    1 Birmingham, Alabama 35242                                         Columbia, Alabama 36319                        Date (as agent for Alabama Power Company)
May 1,2006
: 3. Work performed by                                                                    Type Code Symbol Stamp NIA Name : Southern Nuclear Operating Company Maintenance Department Authorization Number NIA Address :           Joseph M. Farlev Nuclear Plant                              Expiration Date h'lA I
: 4. Identification of System Steam Generator Blow Down System (a) Applicable Construction Code:          ASME Scction 111,        19   - 71 Edition                    Addenda,                 Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,     19   89 Edition            NIA       Addenda,         KIA     Code Case
: 6. identification of Components Repaired or Replaced and Replacement Components:
Name of             Name of             Manufacturer           National            Other           Year         Repaired,        ASME Component          Manufacturer          Serial Number            Board         Identification        Built     Replaced, or        Code No.                                        Replacement        Stamped (Yes1 No)
Studs         Daniel Construction    QlG24CBB5-6147             KIA                7047           1975         Replaced          No Company Studs          T&T Enterprises            $2075 1               Nf A            QP040835          2004       Rcplncement         No
: 7. Description of Work Nuts did not have proper thread engagement on the lower flange of the "A" Generator blow down spool piece. All studs were replaced with new studs. Ref: Transaction Number 89.567
: 8. Test Conducted Hydrostatic   0Pneumatic              Normal Operating Pressure       [XI None          Other I           Pressure              PSI      Temperature           O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number
: 0. 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
G 2 4 - 1041981102          Sheet 2 of 2 Certificate of Compliance We certify that the statements made in the report arc correct and this                replacement                 conforms to the rules of the ASME Code, Section XI.                                                         repair or replacement Typc Code Symbol Stamp                                                                 N/A I
Certificate of Authorization Number                             N/A                      Expiration Date Signed                       -     Owner or Owner's Desionce. Title Maintenance Manager      Date Certificate of Inservice Inspection 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of              &/                      and employed by              e C ? -                                                       of
                                          . C ,                                                      havc inspected the components described in this owner's Report during the dried           my' 1 , Zaob                     to            / I ,~ g d b                   , and state that to the best of my knowledge and belief, the o w n & ha3 performed examination                    n drrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his cmployer makes any warranty, expressed or implicd, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
                                                              - Commissions        e/887  National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                            R T Y P ~:L1.52 A s required by the provisions of the ASME Code Section XI Job Number                      I                         1
: 1. Owner                                                  2. Plant I       G24 - 1041981202            Sheet Unit 1 of    2 Southern Nuclear Operating Company                               Farley Nuclear Plant 40 Inverness Center Parkway                                      Highway 95 South                                      FNP      I Birmingham, Alabama 35242                                        Columbia, Alabama 36319                        Date (as agent for Alabama Power Company)
April 24,2006
: 3. Work performed by                                                                   Type Code Symbol Stamp N/A Name : Southern Nuclear Operating Company lMaintenance De~artment NI A Address :             Joseph M. Farley Nuclear Plant                             Expiration Date NIA I
: 4. Identification of System Steam Generalor Blow Down System I  (a) Applicable Construction Code:          ASME Secllon 111, (b) Applicable Section XI Utilized For Repairs Or Replacements, 19 -
19  89 71 Edition Edition
: 6. Identification of Components Repaired or Replaced and Replacement Components:
N/A Addenda, Addenda,       N/A Codc Case Code Case II Name of              Name of             Manufacturer           National            Other            Year       Repaired,          ASME Component          Manufacturer          Serial Number            Board        Identification         Built   Replaced, or           Code No.                                        Replacement          Stamped (Yes / No)
S~uds(6)        Texas Bolt Company            RR43               N/A           7047-Q-62015         1973        Replaced             No Studs (2)       Texas Bolt Company          6096034              N/ A            QP000766           1997        Replaced I      No Nuts (12)       Texas Bolt Company           125891 1            N/A             QP000448           1992        Replaced Nuts (4)        Texas Bolt Company            RR66               KIA           70474-62015          1973        Replaced Studs           T&T Enterprises             S20751              N/A             QP040835           20%       Replacement 1
Nuts                 Nova                  S69452              VIA             QP0.50669          200.5     Replacement I      No
: 7. Description of Work During disassembly of the Stcam Generator Blowdown Line on "C'Generator, 1 stud and 2 nuts galled. All studs and nuu were replaced on the upper flange of the spool piece. Rei: Transaction Number 91031
: 8. Test Conducted                                                                                                                                I I            Hydrostatic          Pneumatic         Normal Operating Pressure     [XI None           Other I           Pressure               PSI Temperature               OF I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                   RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number G24 - 1041981202                Sheet 2 of       2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Certificate of Compliance We certify that the statements made in the report are correct and this                 replacement                    conforms to the rules of the ASME Code. Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NIA 1 Certificate of Authorization Number                            hr/A                      Expiration Date                        N/A I
I  Signed Owner or Owner's Desirmee. Title Maintenance Manager       Date         1/7 /O     6 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of               R/                    and employed by             ,4&BL7-                                                            of f f m @ ~ 7 -                                                                            have inspected the components described in this Owner's Report ddring the period #&             17, -6                     to                 /3 - 6                       , and state that to the best of my knowledge and belief, the o w n e r h& performed examinations                      o d c t i v e measures described in this Owner's ~ e ~in oaccordance i       with the requirements o r the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury o r property damage or loss of any kind arising from or connected with this inspection.
Commissions       pa/B'7 National ~ o a i dState,
                                                                                                            ,       Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           SType :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                     I                     I
: 1. Owner
                                                         - 2. Plant I        N11 - 1041955302          Sheet I Unit of 2 Southern Nuclear Operating Company                            Farley Nuclear Plant 40 Inverness Center Parkway                                   Highway 95 South                                       FKP   I Birmingham, Alabama 35242                                     Columbia, Alabama 36319                         Date (as agent for Alabama Power Company)
M q 17,2006
: 3. Work performed by                                                                    Type Code Symbol Stamp N/A e                                                     i I       Name : Southern Nuclear O~eratineCompany Maintenance Department Authorization Number NI A I       Address :
: 4. Identification of System Joseph M. Farley Nuclear Plant I
Expiration Date N/A Main Steam S y s k m 5.
(a) Applicable Construction Code:          ASME Section Ill,       19 - 68 Edition         March 1970    Addenda,               Code Case (b) Applicable Section XI Utilized For Repairs Or Replacements,    19  2       Edition         NIA       Addenda.       NIA     Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of             Name of            Manufacturer           National             Other           Year      Repaired,         ASME Component          Manufacturer          Serial Number           Board          Identification       Built   Replaced, or         Code No.                                        Replacement       Stamped (Yes I No)
Stud           Atwood & Monill             4-340              NIA                FNP191           1974       Replaced           No Nut           Atwood & Monill             4-340              NIA                FNP191           1974       Replaced           No Stud           Midsouth Nuclear           WIIB-3              NIA              QP010884           2001     Replacement         No Nut              Unytite, Inc.            SO7159              NIA              QP050784           2004     Replacement         No
: 7. Description of Work During disassembly of valve QlNllV002A. a bonnet nut galled to a bonnet stud. The stud and nut were replaced with a new stud and nut. Ref:
rans sac ti on umber 921 55
: 8. Test Conducted Hydrostatic        Pneumatic         Normal Operating Pressure           None          Other Pressure             PSI Temperature               OF

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                                   RType : L1.52 As required by the provisions of the ASME Code Section X1 1 Job Number                               I                        1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I           N i l - 1041955302               Sheet 2 of        2 Natc: The code year in Block 5 is the code year or the valve. The serial number for the "Replaced" items is the serial number for the valve. No specific information for the stud and nut could be found in the oripinal purchase order.
Certificate of Compliance I
We certify that the statements made in the report are conect and this ASME Code, Section XI.
replacement repair or replncement conforms to the rules of he I
Type Code Symbol Stamp Certificate of Authoriz,alion Nurnber                                NIA N/A Expiration Date I              N/A                    I Signed                                                                      Maintenance Manager              Ihte       7! 6 [o L Owner or0wner's I>ecivner. Title I                                                          Certificate of Inservice Inspection I, thc undersigned, holding a valid commission issued hy [he National Board of Boiler and Pressure Vessel Inspectors and the State or Province of                     R/                      and employed by                  *@-T                                                                 of htmw,                   a-                                                              have inspected the components described in t h ~ sOwner's Report during the period &y                   d; -4                        to                  /&, - 6                          , and state that to the best of my knowledge and belief, the 0 d n e r Gas performed examination                                   cor'rective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makcs any warranly, expressed or implied, concerning the examinations and corrective measures described in this Owner's Reporl. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal in.jury or property damage or loss of any kind arising from or connected with this inspection.
Commissions         fi n 7 National Board, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                           RType :L1.52 As required by the provisions of the ASME Code Section XI Job Number N l l - 1051145201           Sheet 1 of 2
: 1. Owner                                              2. Plant                                                           Unit Southern Nuclear Operating Company                             Farley Nuclear Plant 40 Inverness Center Parkway                                    Highway 95 South                                      FNP    1 Birmingham, Alabama 35242                                      Columbia, Alabama 3631 9                         Date (as agent for Alabama Power Company)
May 17,2006
: 3. Work performed by                                                                  Type Code Symbol Stamp N/A Name : Southern Nuclear Oueratinz Companv Maintenance Department
                                                                                     ~                          N/ A Address :         Joseph M. Farlev Nuclear Plant                             Expiration Date N/A
: 4. Identification of System Main Steam System 5.
(a) Applicable Construction Code:         ASME Section 111,        19  - 71 Edition      Summer 1973      Addenda,               Code Casc (b) Applicable Section XI Utilized For Repairs Or Replacements,    19  89 Edition             NIA         Addenda,       NIA     Code Case
: 6. Identification of Components Repaired or Replaced and Replacement Components:
Name of            Name of            Manufacturer          National            Other              Year      Repaired,        ASME Component          Manufacturer          Serial Number           Board        Identification          Built    Replaced, o r      Code No.                                          Replacement      Stamped (Yes/ No)
Disc Assernbly     Atwood & Morrell           FNPSN8              NI A            QP0 10569            2001       Replaced          No (SEE NOTE I )                         (See Note 2)
Ilisc Assembly     Atwood & Morrell           FNPSNI              K/A             QP050618             2005     replace men^        No (SEE NOTE I)                          (See Note 2)
: 7. Description of Work The disc assembly for QlNI I V001A was replaced as a part ofregularly scheduled maintenance. Ref: Transaction Number 89894
: 8. Test Conducted Hydrostatic       Pneumatic    C]    Normal Operating Pressure     [XI None      C]Other Pressure            PSI Temperature               "F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                       RType : L1.52 As required by the provisions of thc ASME Code Secrion XI Job Number N11 - 1051 145201           Sheet 2 of        2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Note 1. DISCassemblies have bccn reserialized by FNP for tracklng purposes.
Note 2: Purchase order nurnber m d year built reflect the most recent rcfurbish~nent.
I                                                               Certificate of Compliance I
I We certify that the statements made in the report are correct and this          -            replacement                 conlorms to the rules of the ASME Code. Section XI.                                                                repair or replacement Type Code Symbol Stamp                                                                        NIA
( Certificate of Authorization Number                                  NIA                        Expiration Date   -                 NIA                  -I I  Signcd Owner or Owner's Desinnec. Title Maintenance Manager      Date    -7i ? / u 6 Certificate of Inservice Inspection 1 Inspectors and Lhe State of he components described
                                                                                                                                         ,and slate that ures described in this Owner's Report in accordance with the rcouirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furlhermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions     &/ fl?              i+r/ //
National Hoard, State, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                             RType : L1.52 As required by [he provisions of the    ASME Code ~ c c t i o nXI IJ o b Number
: 1. Owner                                                2. Plant I        N11- 1051145301            1 I
Sheet Unit I   of  2 Southern Nuclear Operating Company                              Farley Nuclear Plant 40 Inverness Center Parkway                                     Highway 95 South                                       FNP     1 Birmingham, Alabama 35242                                       Columbia, Alabama 36319                          Date (as agent for Alabama Power Company) 1                                                                        May 17.2006
: 3. Work performed by                                                                 1 Type Code Symbol Stamp I         Namc : Southern Nuclear Operating Company Maintenance Department Authorization Number I         Address :         Joseph M. Farley Nuclear Plant                               Expiration Date N/A I  4. Identification of System Main Steam System (a) Applicable Cons~rucrionCode:           ASME Scction 111,         19  -71 Edition       Summer 1973   Addenda,                   Code Case (b) Applicable Section XI Utili~edFor Repairs Or Replacements,       19  89 Edition            KIA       Addenda.          N/A      Code Case 1 6.                                                                                                                                                I 1 1                          1 Identification of Components Repaired or Replaced and Replacement Components:
I       Name of       I    Name of         I  Manufacturer Serial Number I National  I        Other Identification I  Year But I   Remired.
                                                                                                                     ~ e c e dr ,
Replacement I    AShlE Code Stamped (1
(YesI No)
Disc Assembly      Atwood & Morrell          FNPSN4                 N/A            QP010569           2001         Replaccd            No (SEENOTE I)                             (See Note 2)
Iliac Assernhly    Atwood & Morrell          FNPSN3                 N/A            QPOSO6 I8          2005       Rcplaccrnent          No (SEE NOTE 1)                            (See Now 2)
: 7. Description of Work IThe disc a!Isembly for Q1N11 V001 B was replaced as a part of regularly scheduled maintenance. Ref: Transaction Number 89897                      I
: 8. Test Conducted Hydrostatic       Pneumatic         Normal Operating Pressure        [XI None          Other Pressure            PSI      Temperature              OF L

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                       RTYPC :L1.52 As required by the provisions of the ASME Code Section XI 1 Job Number                        I                     1
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
I         N11 - 1051 145301           Sheet 2 of 2 Note I : Disc a~senlblieshave been rescriali7sd by FNP for tracking purposes.
I NUU 2:   Rlrchase order number and year built reflecr the most recent refurbishmm~
I Certificate of Compliance We wflify thal lhe statements made in the report are correct and this                         replacemen t                conforms to the rules of the ASME Code, Src~ionXI.                                                                 repair or replaccmenl Type Code Symbol Stamp                                                                        N/A                 -
Certificate of Autharirat~onNumbcr                                  NIA                          Expiration Date                     NIA Signed                    L%@hm-                                              Maintenance Manager       Datc       7 (7 1 Owner or Owner's Desimee. Ti~le I                                                         Certificate of Inservice Inspection d commission issued by the National Board o l B iler and Pressure Vcssel Inspeclors and the State I
or Province of                                            and employcd by                    $.&T                                                      of (5-f                                                           havc inspected the components described heriod       f l ~          / 7- *&               to       IJ=V/'J            Z&Oc              , and state that to thc best of my knowledge and belief. the O a n e r has pcf50rmed cxaminalions and takedcorrhd~vemeasures described in this Owner's Report in accordance with the requiremenls of the ASME Codc, Section XI.
1 By signing this certificate neither the Inspeclor nor his employer makes any warranty, expressed or implied, concerning the I
examinations and corrective measures described in this Owner's Reporl. Furthcrmorc, neither the Inspector nor his employer shall be llable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions National Board. Stale, Province, and Endorsements

Form NIS-2 Owner's Report for Repairs or Replacements                                                                             RTYPC:L1.52 As required by Lhe provisions of the ASME Code Section XI
                                                                                             ) Job Number                    I                    1
: 1. Owner                                                  2. Plant I        N l I - 1051145401       Sheet 1 of 2 Unit Southern Nuclear Operating Company                                 Farley Nuclear Plant 40 Inverness Center Parkway                                        Highway 95 South Birmingham, Alabama 35242                                          Columbia, Alabama 36319 (as agent for Alabama Power Company
: 3. Work performed by I Type Code Symbol Stamp N/A I          Name : Southern Nuclear Operating Company Maintenance Department 1
N/A I          Address :           Joseph M. Farlev Nuclear Plant                                 Expiration Date N/A I 4. Identification of System 5.
Main Sleam System (a) Applicable Construclion Code:           ASME Section 111,          19 -  71 Edition       Summer 1973      Addcnda,           Code Case (h) Applicable Section XI Utilized For Repairs Or Replacements,        19          Edition         NIA         Addenda. N/A    Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of              Name of             Manufacturer            National              Other I
Component          Manufacturer           Serial Number              Board         Identification No.
(Yes / No)
Disc Assembly      Atwood & Morrell            nrPSN7                  N/A             QPO10569 (SEE NOTE 1 )                             (See Note 2)
I>isc Assembly     Atrvood & lMorrell         FKPSNS                  N/A              QPO506 18 (SEE NOTE I )                             (See Note 2)
: 7. Description of Work IThe    disc a;scmbly for Ql N l IVOOI C was replaced as a part of regularly scheduled maintenance. Ref: Transaction Number 89898 I
: 8. Test Conducted Hydrostatic         Pneumatic         Normal Operating Pressure         [XI None            Other I              Pressure             PSI Temperature                  OF I

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                        RType : L1.52 As required by the provisions oi'the ASME Code Section XI Job Number N11 - 1051145401             Sheet 2 of 2
: 9. Remarks (Applicable Manufacturer's Data Reports to be attached)
Note 1: Disc assemblies have been rescrinlized by PNP for tracking pulposes.
Note 2: Purchase ordcr number and year built reflecc the most recent refurbish~nenl.
Certificate of Compliance We certify that the sla~rncntsmade in the report are correcl and this ASME Code, Section XI.
Type Code Symbol Stamp I Certificate of Authorimtion Number Signcd N/A reptaccrnenl repair or replacement N iA Maintenance Manager Expiration Date Date
                                                                                                                    '771/
conforms to the ~ l e ofs the J L N/A               -I I
Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding                                  ued by the National Board of Boiler and Pressurc Vessel Inspectors and the State or Province of                                                                                                                                           of
                                                            - -                                              have inspected the components described
                                                                                                                                          , and state that easures described in this Owner's ~ e ~ oinr accordance
                         ;             with the requirements o i the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
omm missions                          Ad//
National l3oa;d: State, Province, and Endorsements
            /
Date     &L        //cZW&

Form NIS-2 Owner's Report for Repairs or Replacements As required by the provisions of the ASME Code Section XI Job Number N11-1051233001 I                                                                                   I Sheet 1 of 2
: 1. Owner                                               2. Plant                                                    Unit Southern Nuclear Operating Company                                Farley Nuclear Plant 40 Inverness Center Parkway                                       Highway 95 South                                 FNP    1 Birmingham, Alabama 35242                                         Columbia, Alabama 36319                    Date (as agent for Alabama Power Company                                                                                 05/02/06
: 3. Work performed by                                                                 Type Code Symbol Stamp NIA Name : Southern Nuclear Ooeratin~Companv Mdntenance Department Authorization Number NIA Address :          Joseph M. Farley Nuclear Plant                              Expiration Date NIA
: 4. Identification of System MAIN STEAM SYSTEM 5.
(a) Appl~cableConstructton Code             SEE NOTE               19  -E d ~ t ~ o n                 Addenda,              Code Casc (b) Appl~cableSect~onXI U t i l ~ ~ eFor d Repa~rsOr Replacernentc,   19  5Edmon                KIA      Addenda,     NIA      Code Case
: 6. Identification of Components Repaired o r Replaced and Replacement Components:
Name of            Name of               manufacturer          National           Other           Year      Repaired,        ASME Component        Manufacturer            Serial Number           Board        Identification       Built   Replaced, o r        Code No.                                      Replacement       Stamped (Yes 1 No)
HYD SNUBBER          GRlNNELL                   17004              NI A            FNP 272          1977      REPLACED            NO HYD SNUBBER           GRINNkLL                   19216              NIA              36807           1983   REPLACEMENT            NO
: 7. Description of Work REPLACEMENT SNUBBER MSR2 12 WAS REBUILT PRE-OUTAGE 7'0 MEET SCHEIIULE REFERENCE TRANSACTION NUMHEK 89924 VT-3 COMPLETED AFTER SNUBBER WAS REPLACED Hydrostatic         Pneumatic           Normal Operating Pressure         None     [XJ Other I          Pressure              PSI Temperature                 O F

Form NIS-2 Owner's Report for Repairs or Replacements                                                                                ~ y p :eL1.52 As required by the prov~sionsof the ASME Code Section XI Job Number Nll-1051233UUl             Sheet 2      of   2
: 9. Remarks (Applicable Manubcturer's Data Reports to be attached)
NOTh. SUPPORTS ARE DESIGNED TO AISC-1969 AND WELDED TO A W S D I 1 Certificate of Compliance We certify that the statcmcnts made in the report are correct and this                 replacement                 conforms to the rules of the ASME Code, Section XI.                                                          repair or replacement Type Code Symbol Stamp                                                                 NIA Certificate of Authorizalion Number                            NIA                        Expirarion Date Signed                                                                 Maintenance Manager       Dale Owner or Owner's Desienee. Titlc Certificate of Inservice Inspection 3rd of Boiler and Pressure Vessel Inspeclors and the State
                                                                                      /Ltssc7--                                                 of have inspected [he components described to       - VW,ZtX7L                          , and state that minations and tak~dcorrec6vemeasures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
Commissions         & 887                     //
National Board. State. ~iovince,and Endorsements}}