View source for LR-N09-0012, U. S. Additional Protocol

{{Adams
| number = ML090270874
| issue date = 01/22/2009
| title = U. S. Additional Protocol
| author name = Mattingly W
| author affiliation = PSEG Nuclear, LLC
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000272
| license number = DPR-070
| contact person = 
| case reference number = LR-N09-0012
| document type = Letter type:LR, Report, Miscellaneous
| page count = 18
}}

=Text=
{{#Wiki_filter:PSEG Nuclear LLC P.O. Box 236, Hancocks Bridge, NJ 08038-0236 0  PSEG NuclearL.L. C.
JAN 2 2 2009                                                                      10 CFR 75 LR-N09-0012
-U.S. Nuclear Regulatory Commission ATTN: Documeht Control Desk Washington, DC 20555-0001 Salem Nuclear Generating Station Unit 1 Facility Operating License No. DPR-70 NRC Docket No. 50-272

==Subject:==
U.S. Additional Protocol for Salem Unit 1 PSEG Nuclear LLC is transmitting the attached forms for Salem Unit 1 in support of the U.S. Additional-Protocol. 10CFR75.11(c) states that the initial report must be submitted no later than 30 calendar days following the date of publication of this rule which was issued on December 23, 2008.
Should you have any questions concerning this submittal, please contact Brian Thomas at 856-339-2022.
Sincerely, William Mattyr1gly.
Salem Regulatory Assurance Manager Attachment 4oo/

Document Control.Desk LR-N09-0012 Mr. Samuel Collins, Administrator - Region I U. S. Nuclear Regulatory Commission 475 Allendale Road King of Prussia, PA 19406 USNRC Resident Inspector Office - Salem Mr. R. Ennis, Project Manager - Hope Creek and Salem U. S. Nuclear Regulatory Commission Mail Stop 08B2 11555 Rockville Pike Rockville, MD 20852 Mr. P. Mulligan Bureau of Nuclear Engineering P.O. Box 415 Trenton, NJ 08625

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                           Date Received Bureau of Industry and Security                                   (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-A: CERTIFICATION Provide the information requested below in Questions A.1 through A.6.
Company or Organization Name: PSEG Nuclear M~1ilintT Adcire'~   PG Box 236 City: Hancocks Bridge                               State: NJ           Zip Code: 08038 Name of Report Point of Contact (R-POC): Brian Thomas R-POC's Telephone Number: 856-339-2022                                 ext.
R-POC's Fax Number: 856-339-7077 R-POC's E-mail Address: brian.thomas@pseg.com Type of Report (Check only one box)
Zl INITIAL REPORT: For Reporting Year (YYYY):       2008 El ANNUAL UPDATE REPORT: For Reporting Year (YYYY):
E[ PROCESSING OF IAEA SAFEGUARDS-TERMINATED WASTE MATERIAL REPORT El EXPORT OF SPECIFIED EQUIPMENT & NON-NUCLEAR MATERIALS REPORT El IMPORT OF SPECIFIED EQUIPMENT & NON-NUCLEAR MATERIALS CONFIRMATION REPORT E- SUPPLEMENTAL INFORMATION REPORT El AMENDED REPORT: For Reporting Year (YYYY):
Forms Submitted (State the number of forms (non-zero) for each of the following)
AP-B: 1        AP-C:   12     AP-D:         AP-E:         AP-F:      AP-G:            AP-H:.
API_:         AP-J:       AP-K:       AP-L:        AP-M:        AP-N:         AP-O:         AP-P:
CERTIFICATION I hereby certify that I have reviewed the attached documents and that, to the best of my knowledge and belief, the submitted information is true and complete.
Name and Title of Responsible Official (type or print):
William Mattingly, Salem Regulatory Assurance Manager Signature:
Date Signed (MM-DD-YYYY):                 01_ -      2

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                       Date Received Bureau of Industry and Security                               (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Material Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-B: CONTACT INFORMATION FOR THE SITE OF AN IAEA-SELECTED FACILITY Submit this form to report information about the site where reportable activities are conducted. You must submit this form for an Initial, Annual Update, Amended, Processing of IAEA Safeguards-Terminated Waste, Export, Import Confirmation, or Supplemental Information Reports.
Site Name and Site Reporting Code (once assigned): Salem Nuclear Station Unit I Site Information Reporting Status:
Z] New information 0 Information with no changes El Information with changes Owner or Operator Name: PSEG Nuclear Telephone Number (24 hour):                                 Fax Number (24 hour):
856-339-5200                                                      856-339-1684 Street Address: End of Alloway Creek Neck Road City: Hancocks Bridge                             FState:NJ     I Zip Code: 08038 Provide the geographic coordinates for the site where the reportable activity(ies) take place.
: a. Latitude (Deg/Min/Sec/N): 39 degrees 27 min 46 sec North
: b. Longitude (Deg/Min/Sec/W): 75 degrees 32 min 08 sec West Designate an Access Point of Contact (A-POC) and at least one Alternate A-POC for complementary access notifications involving this site.
Name of A-POC: Salem Shift Manager A-POC's Primary Telephone Number: 856-339-5200                                     ext.
A-POC's Alternate Telephone Number: 856-339-5201                                   ext.
A-POC's Fax Number: 856-339-1684 A-POC's E-mail Address: n/a Name of Alternate A-POC: Salem Unit 1 Control Room Supervisor Alt. A-POC's Primary Telephone Number: 856-339-5201                                ext.
Alt. A-POC's Alternate Telephone Number: 856-339-5202                              ext.
Alt. A-POC's Fax Number: 856-339-1684 Alt. A-POC's E-mail Address: n/a
                .Z Check this box to confirm that a site map, drawn to scale, is attached.
r7 Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

SALEM GENERATING STATION LAYOUT NO.2                      'NO.I
     &#xb8;(::1Z:
USLOING COz STORAGE NON-RADIOACIEVE wAI DISPOSAL. BASIN SODIUM HYPOCHLORnIT STORAGE WATErd TANKS DELAWARE RIVER SERVICE WATERINTAKE-STRUCTURE

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                         Date Received Bureau of Industry and Security                                 (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 1 CONTAINMENT Building Reporting Status El New Building Z Building with no changes D Building with changes E Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 3 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
78 Elevation: 1620 sq. meters 100 Elevation: 1620 sq. meters 130 Elevation: 1620 sq. meters Specify the current use of the building:
Containment building for the Salem Unit 1 reactor.
Specify all prior nuclear-related uses of-the building (if any):
None El   Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                        Date Received Bureau of Industry and Security                                (Leave Blank)
                     *U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 2 CONTAINMENT Building Reporting Status E New Building Zl Building with no changes El Building with changes El Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 3 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
78 Elevation: 1620 sq. meters 100 Elevation: 1620 sq. meters 130 Elevation: 1620 sq. meters Specify the current use of the building:
Containment building for the Salem Unit 2 reactor.
Specify all prior nuclear-related uses of the building (if any):
None FD Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any ofthe above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                             Date Received Bureau of Industry and Security                                    (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT I AUXILIARY BUILDING Building Reporting Status El New Building Z Building with no changes El Building with changes
[] Removed Building If applicable, provide the IAEA Facility Code(s) for.operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 6 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
45 Elevation:   509 sq. meters 55 Elevation:   509 sq. meters 64 Elevation:   2279 sq. meters 84 Elevation:   2272 sq. meters 100 Elevation:  2272 sq. meters 122 Elevation:  2272 sq. meters Specify the current use of the building:
The Auxiliary Building contains support equipment for the operation of the Salem Unit 1 reactor.
Specify all prior nuclear-related uses of the building (if any):
None D   Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                            Date Received Bureau of Industry and Security                                    (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 2 AUXILIARY BUILDING Building Reporting Status E1 New Building Zl Building with no changes El Building with changes DE.Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 6 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
45 Elevation:   509 sq. meters 55 Elevation:   509 sq. meters 64 Elevation:   2279 sq. meters.
84 Elevation:   2272 sq. meters 100 Elevation: 2272 sq. meters 122 Elevation: 2272 sq. meters Specify the current use of 'the building:
The Auxiliary Building contains support equipment for the operation of the Salem Unit 2 reactor.
Specify all prior nuclear-related uses of the building (if any):
None II   Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                             Date Received Bureau of Industry and Securit'                                    (LeaveBlank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 1 INNER PENETRATION AREA Building Reporting Status El New Building Zl Building with no changes D Building with changes El Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 2 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
78 Elevation:   695 sq. meters 100 Elevation:  670 sq. meters Specify the current use of the building:
The Inner Penetration Area contains support equipment for the operation of the Salem Unit 1 reactor.
Specify all prior nuclear-related uses of the building (if any):
None D1   Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                            Date Received Bureau of Industry and Security                                    (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building onyour site. A separate form must be completed for each building.
C         Site Reporting Code (Once assigned):
     *C2 Building Name or Number (as it appears on the attached site map):
S    SALEM UNIT 2 INNER PENETRATION AREA C.3 *j*   Building Reporting Status E New Building S Building with no changes El Building with changes El Removed Building (i        If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 2 Provide thefloor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
78 Elevation:    695 sq. meters 100 Elevation:  670 sq. meters Specify the current use of the building:
The Inner Penetration Area contains support equipment for the operation of the Salem Unit 2 reactor.
Specify all prior nuclear-related uses of the building (if any):
None
[-] Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.'

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                            Date Received Bureau of Industry and Security                                    (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 1 OUTER PENETRATION AREA Building Reporting Status El New Building.
Z Building with'no changes El Building with changes El Removed Building If applicable, provide the TAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 1 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
100 Elevation:  171 sq. meters Specify< the current use of the building:
The Inner Penetration Area contains support equipment for the operation of the Salem Unit 1 reactor.
Specify all prior nuclear-related uses of the building (if any):
None Check this box if a Continuation Form (Form AP-P) has been used to C
provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                             Date Received Bureau of Industry and Security                                    (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 2 OUTER PENETRATION AREA Building Reporting Status El New Building Z Building with no changes El Building with changes El Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 1 Provide the tloor area (in square meters) tor each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
100 Elevation:  171 sq. meters Specify the current use of the building:
The Inner Penetration Area contains support equipment for the operation of the Salem Unit 2 reactor.
Specify all prior nuclear-related uses of the building (if any):
None F-1 Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                        Date Received Bureau of Industry and Security                                (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each building.
C         Site Reporting Code (Once assigned):
(.        Building Name or Number (as it appears on the attached site map):
SALEM UNIT I FUEL HANDLING BUILDING (C.3      Building Reporting Status El New Building SBuilding with no changes El Building with changes D Removed Building S   If applicable, provide the IAEA Facility Code(s) for operations that occur within the
    .4     building in the boxes below:
Number of Floors (include basements and sub-basements): 3 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
84 Elevation:    495 sq. meters 100 Elevation:   775 sq. meters 130 Elevation:  775 sq. meters Specify the current use of the building:
Contains the Salem Unit 1 Spent Fuel Pool.
Specify all prior nuclear-related uses of the building (if any):
None II   Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                         Date Received Bureau of Industry and Security                                 (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for ever)y building on your site. A separate form must be completed for each building.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 2 FUEL HANDLING BUILDING Building Reporting Status El New Building Z Building with no changes El Building with changes El Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 3 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
84 Elevation: 495 sq. meters 100 Elevation: 775 sq. meters 130 Elevation: 775 sq. meters Specify the current use of the building:
Contains the Salem Unit 2 Spent Fuel Pool.
Specify all prior nuclear-related uses of the building (if any):
None D]  Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions.

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                        Date Received Bureau of Industrv and Securityv                               (Leave Blank)
U.S. NUCLEAR REGULATORY COMMISSION Officeof Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit this form for every building on your site. A separate form must be completed for each buildin2.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT I SERVICE WATER ACCUMULATOR ENCLOSURE Building Reporting Status LI New Building Z] Building with no changes LI Building with changes 0l Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): 1 Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
100 Elevation: 42 sq. meters Specify the current use of the building:
Contains support equipment for the operation of the Salem Unit I reactor.
Specify all prior nuclear-related uses of the building (if any):
None Check this box if a Continuation Form (Form AP-P) has been used to provide additional information for any of the above questions. -

FORM APPROVED: OMB NO. 0694-0135 U.S. DEPARTMENT OF COMMERCE                                        Date Received Bureau of Industry and Securit"                                (Leave Blank)
U.S. NUCLEAR REGULATORY. COMMISSION Office of Nuclear Materials Safety and Safeguards ADDITIONAL PROTOCOL REPORT FORM AP-C: BUILDING INFORMATION Submit-this form for every building on your site. A separate form must be completed for each buildin2.
Site Reporting Code (Once assigned):
Building Name or Number (as it appears on the attached site map):
SALEM UNIT 2 SERVICE WATER ACCUMULATOR ENCLOSURE Building Reporting Status O New Building
[] Building with no changes El Building with changes 0I Removed Building If applicable, provide the IAEA Facility Code(s) for operations that occur within the building in the boxes below:
Number of Floors (include basements and sub-basements): I Provide the floor area (in square meters) for each floor of the building, starting from the bottom of the building up (include basements and sub-basements):
100 Elevation: 42 sq. meters Specify/ the current use of the building:
           .Containssupport equipment for the operation of the Salem Unit 2 reactor.
Specify all prior nuclear-related uses of the building (if any):
None El  Check    this additional provide   box ifa Continuation Form (Form AP-P) has been used to information for any of the above questions.}}