View source for L-2000-179, In-Service-Inspection Program, Third Interval Second Period, Owner'S Activity Reports for Refueling Outages SL1-18 and SL1-19

{{Adams
| number = ML052410144
| issue date = 08/10/2005
| title = In-Service-Inspection Program, Third Interval Second Period, Owner'S Activity Reports for Refueling Outages SL1-18 and SL1-19
| author name = Jefferson W
| author affiliation = Florida Power &amp; Light Co
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000335
| license number = DPR-067
| contact person = 
| case reference number = L-2000-179
| document type = Inservice/Preservice Inspection and Test Report, Letter type:L
| page count = 34
}}

=Text=
{{#Wiki_filter:.1   -  . s0 Florida Power & Ught Company, 6501 S. Ocean Drive, Jensen Beach, FL 34957 0                                              August 10, 2005 FPL L-2000-179 10 CFR 50.55a 10 CFR 50.36 U. S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555 Re:    St. Lucie Unit 1 Docket No. 50-335 In-Service-Inspection Program Third Interval Second Period Owner's Activity Reports for Refueling Outages SL1-18 and SL1-19 Enclosed are the St. Lucie Unit 1 Third Interval, Second Period, ASME Section XI Forms OAR-I, Owner's Activity Report. The Second Period ended on February 10, 2005. The Form OAR-1, Owner's Activity Report, implements Code Case N-532. This code case, approved by the NRC for St. Lucie Units 1 and 2 on June 18, 1999, provides an alternative to the requirements of ASME Section XI, Sections IWA-4910(d), IWA-6210(c), (d), and (e),
IWA-6220(b), (c), and (d), and IWA-6240(b). The OAR-1 report is prepared and certified upon completion of each refueling outage and submitted following the end of each inspection period.
The enclosed Form OAR-1 is for refueling outages SL1-18 and SL1-19.
Should there be any questions, please contact us.
William Jefkyrr Vice President St. Lucie Plant WJ/GRM Enclosure (2)
AOW7 an FPL Group company

St. Lucie Unit 1 Docket No. 50-335 L-2005-179 Enclosure 1 Page 1 of 18 ENCLOSURE 1 FORM OAR-1 Owner's Activity Report Refueling Outage SLI1-18

Form OAR-1 Owner's Activity Report Report Number:lSI-PSL-1-2002 Owner:                Florida Power and Light Company P.O. Box 529100 Miami, Florida 33152 Plant:                St. Lucie Nuclear Power Plant Unit 1 6501 South Ocean Drive Jensen Beach, Florida 34957 Commercial Service Date: December21, 1976                Refueling Outage No.: SL1-18 Current Inspection Interval: Third             Current Inspection Period: Second Edition and Addenda of Section Xl applicable to the inspection plan: 1989, and for section IWE, 1992 Edition with addenda through 1992 (IWL not applicable to St. Lucie Unit 1).
Date and Revision of inspection plan: May 21, 2002 Rev.2 Edition and Addenda of Section Xl applicable to repairs and replacements, if different than the inspection plan: Same CERTIFICATE OF CONFORMANCE I certify that the statements made in this Owners Activity Report are correct, and that the examinations, tests, repairs, replacements, evaluations, and corrective measures represented by this report conform to the requirements of Section Xl.
Certificate of Authorization No.: N/A            Expiration Date: N/A Signed                           )aZ-          L wrier or Owners Designee, Title aNc~
R-t m r-    C-eS-Date 9/ze/o3 Hi Al CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Florida and employed by HSBCT of Hartford Connecticut have Inspected the items described in this Owner's Activity Report, during the period May 1, 2001 to October 24, 2002, and state that to the best of my knowledge and belief, the Owner has performed all activities represented by this report in accordance with the requirements of Section Xl.
By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the examinations tests, repairs, replacements, evaluations, and corrective measures described in this report. Furtljermore, neither the inspector nor his employer shall be liable In any manner for any personal injury or property                  loss of an kind arising from or connected with this inspection. _.
Ae?'&                        Al           fg n n ae                       c=S  IA,,wl   4/7-&deg;5       Commissons Ion            ..&
_/...
                   / (jpector's  Signature                                           National Board, State, Province, and Enhorsements Date              6/-1           q       -

Il I
Revision A TABLE 1 (Post 2002 Outage)
ABSTRACT OF EXAMINATIONS AND TESTS Total                   Total                         Total
                                                                                              .Total Examinations Examination  Examinations       Examinations                      Examinations          Credited (%)to                                    Remarks Category    Required for         Credited for                    Credited (%)             Date for the the Interval          this period                   for the period             Interval B-A            27                        0                          0%                      4%
B-B             7                       0                           0%                     29%
B-D            36                       10                         100%                    50%
B-E     Covered under site pressure test program B-F            30                        8                         67%                     50%
B-G-17                                     3               l         100%                                     (43%
1 of the 7 items required only if disassembled), RR# 10 B-G-              7 3100%43%and                                                                RR#1 8 apply B-G-2            22                        8                         100%                    59%
B-H     Code Case N-509 applies. Category B-H items are included with Category B-K B-J           161                       4                           6%                     31%              total count req. Reflects circ welds only B-K             5                       2                          67%                     40%              Code Case N-509 applied, RR#8 allows code %
_ _ _ __ __ __ __ _ __ __ __ _    _ _ _  _ _ _ _ _ _   _ _  _ _ _  _ _ _ _ _ _   deviation B-L-1            2                       0                           0%                      0%              Code Case N-481 Applied B-L-2                1                   0                           0%                      0%              Required only if Pump disassembled B-M-1     There are no B-M-1 valve body welds B-M-2             4                        0                          0%                     25%              1 of each group required when disassembled B-N-1            27                        8                         89%                     63%              Each item must be examined each period B-N-2            25                        0                          0%                      0%
B-N-3            29                        0                          0%                      0%
B-O             3                       0                           0%                      0%
B-P     System pressure tests are performed in accordance with plant procedures. Quantification of the number of tests is not practical.
At the end of the Interval, FPL will ensure that 100% of the systems have been tested.
B-Q     Steam Generator tubing Is examined in accordance with Plant Technical Specifications. See the NIS-BB for details.
C-A             4                       0                           0%          I           0%            I RR#8 allowscode% deviation C-B             5                       0                  l        0%          l          40%       l      RR48 allowscode%deviation

Revision A TABLE 1 (Post 2002 Outage)
ABSTRACT OF EXAMINATIONS AND TESTS Total Total                Total                  Total.          Examinations Examination  Examinations         Examinations           Examinations Category    Required for        Credited for            Credited (%)          Date for the                                  Remarks the Interval          this period          for the period           Interval C-C            4                     1                   100%                  50%            Code Case N-509 Applied C-D             1                   0                      0%                   0%
C-F-1          69                    13                    52%                  39%            total count req. Reflects cIrc welds only Less than 28 welds would be required if 7.5% criteria is C-F-2          28                    8                     80%                  61%            followed, FPL raised the total count to 28 per note 2, total count req. reflects circ. Welds only C-G    No category C-G Items C-H    System pressure tests are performed in accordance with plant procedures. Quantification of the number of tests Is not practical.
At the end of the interval, FPL will ensure that 100% of the systems have been tested.
D-A            4          l         0           l          0%         l        25%          l Code Case N-509 Applied D-B DB C   System At the endpressure   tests areFPL of the Interval,     performed     Inaccordance will ensure      that 100% with of theplant procedures.
systems  have been Quantification tested.      of the number of tests Is not practical.
D-C    _   _   _  _   _       _   _   _   _   _   _    _    _   _   _
(IWE) E-A         174                   0                      0%                  25%            100% General Exam required each period (IWE) E-D          8                    3                    100%                  63%            Includes exam of 1/3 of moisture barrier                      I (IWE) E-G           8                   0                      0%                  25%                                                                          I F-A,F1.10         57                    19                   100%                  67%            Code Case N-491 -1 Applied for all supports F-AF1.20          54                    15                    83%                  61%            Code Case N-491-1 Applied for all supports F-A,F1.30         54                    17                    94%                  65%            Code Case N-491-1 Applied for all supports F-A,F1.40         13                    0                      0%                  31%            Code Case N-491-1 Applied for all supports, RR#8
_ __ _ St._________
does________
not_________
_h _ _ c    _ _ _e           t.               xiallows        _           code %deviation IWL    St. Lucie does not have a concrete containment. No examinations are required.

TABLE 2 ITEMS WITH FLAWS OR RELEVANT CONDITIONS THAT REQUIRED EVALUATION FOR CONTINUED SERVICE Examination       Item      Item            Flaw        Flaw or Relevant Condition Found Category       Number Description   Characterization  During Scheduled Section XI l                                           (IWA-3300)    IExamination or Test (Yes or no)
I                       _                        _
There were no flaws or relevant conditions that required evaluation for continued service.
)

I e3 ABSTRACT OF REPAIRS, REPACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description              Condition Found of Work                     During Scheduled ISI Exam or Test ?
2 Repair.      X V02132     Remove, reweld body/bonnet seal       Y    / NO:       8/7/01       SLI- 01002 weld -YS/N:870 Replacement: X Corrective                Contingency replace disc                      NOeral#
Measure:                  Previously tracked as SL-1 031                      Interval #3 Period #2 2 Repalr:        V2326      Replace valve with existing tested                                  SL- 01003 spare previously in service.          YES I NO:        10125/01 Replcemet: XNO Corrective Measure:                 jPeriod                                                  Interval #3
                                                                                             #2 2 RepaIr:        CHG PP IA  Vr-I examination of pump inlet                                      SLI- 01004 bolting required by IWC-3516 and      YES I NO:        8/7/01 Replacement: X            Relief Request 4, following leakage          YES Corrective                Identified during VT-2.                                 Interval #3 Measure:                                                                          Period #2 2 Repair:        CHG PP lB  Vr-I examination of pump inlet                                      SL1- 01005 bolting required by IWC-3516 and      YES I NO:        713/01       SI   0 Replacement. X            Relief Request 4, following leakage          YES Corrective                Identified during Vr-2.                                 Interval #3 Measure:                                                                          Period #2 2 Repair         CHG PP IC  Vr-I examination of pump inlet                                      SL1- 01006 bolting required by IWC-3516 and      YES I NO:        8/14/01 Replacement: X            Relief Request 4, following leakage          YES Corrective                Identified during VT-2.                                 Interval #3 Measure:                                                                          Period #2 I

I, T .3 IJ ABSTRACT OF REPAIRS, RE'PtACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period Flaw or Relevant Description               Condition Found of Work                       During Scheduled ISI Exam or Test ?
3 Repalr:            EDG 1A2    Replace EDG Radiator Bolting and                                     SLI- 01008 Relcmn:~Flanges.                                          YES I NO:        818101 Replacement: X                                                              NO Corrective                                                                             Interval #3 Measure:                                                                               Period #2 3 Repair:            CC-19-4    Inspect, modify CCW Surge Tank         YES NO:          519102       SLI- 01010 Replacement: X     CC 199 5   retumn line supports.YE/NO590 Corrective                                                                             Interval #3 Measure:                                                                               Period #2 2 Repair             V2326      Replace V2326 with tested spare        YSIN:8102                     SLI- 02017 from rotated stock                      YES/NO:          8/14/02 Replacement: X                                                              NO Corrective                                                                             Interval #3 Measure:                                                                               PerIod #2 3 Repair             CH-938     Replace severely corroded Hanger                                     SL1- 02018 Replacement: X     YPH-167    Clevis on YPH-167.                            NO        4/29/02 Corrective                                                                             Interval #3 Measure:                                                           .Period                      #2 2 Repair             V3483     Rebuild valve, replace nozzle disc,     YES I NO:        8128102      SLI1- 02019 stem, spring Replacement: X   I                  0 CompINO Corrective                   Task02Complete                                            Interval #3 Measure:                                                                               Period #2 2

I; '
S.'-,
ABSTRACT OF REPAIRS, REiPtACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period Flaw or Relevant               Date           Repair!
Description                        ConditEon Found Condition    Found              Date           Repair/
of Work                                 During               Complete       R Replacement Scheduled ISI                          Plan Number Exam or Test ?           ScheuledI~i      lan    umbe 2 Repair:         V3468                             Rebuild valve, replace nozzle disc,               Y          :SL1-                                 02020 stem, spring                                      YSIN:530 Replacement: X                                                                                               NO Corrective                                                                                                                      Interval #3 Measure:                                                                                                                     I
_ _ _ __ _ _ __ __ _ __ _ __ __ _ _ _ _ _ _ _ _ _  _ _ _ _  _ _ _ _ _ _ _ _ _ _ _   _ _ _ _ _ _ _ _ _ _ _ _ _    Pe riod   #2 _   _  _  _  _ _
2 Repair          CH-210                            Replace CHG PP vent valve with butt               Y       N                                SLI- 02021 weld design per PCM.                              YES NO:                    5/9102 Replacement: X                                                                                               NO Corrective                                                                                                                      Interval #3 Measure:                                                                                                                        Period #2 2 Repair:         CH.209                            Replace CHG PP vent valve with butt               YSNO5/02S1.1-                                    02022 weld design per PCM.                              YES I NO:                  5/9/02 Replacement: X                                                                                               NO Corrective                                                                                                                      Interval #3 Measure:                                                                                                                        Period #2 2 Repair:         CH-208                            Replace CHG PP vent valve with buff                                                        SLt- 02023 weld design per PCM.                              YESI NO:                   8/25/02 Replacement: X                                                                                               NO Corrective                                                                                                                      Interval #3 Measure:
I                          l                           l  Perlod #2l 3 Repair:         CCW HX 1A                         Replace plugged HxTubes                           YES I NO:                  10/5/02       SLI- 02026 Replacement: X                                                                                               NO Corrective                                                                                                                       Interval #3 Measure:                                                                                                                        Period #2 3

ABSTRACT OF REPAIRS, REPiCEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period I-Flaw or Relevant Description                  Condition Found of Work                        During Scheduled ISI Exam or Test ?
2 Repair         V2326      Replace with Spare Valve                YES I NO:        8114/02      SL1- 02030 Replacement: X                                                           NO Corrective                                                                          Interval #3 Measure:
           .r                                                                         Period #2 2 Repair         V8202      Remove, test, rebuild valve as                                        SLI- 02031 necessary. Replace Inlet bolting and    YES I NO:        10/25/02 Replacement: X            nuts.                                          NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 2 Repalr         V8206      Remove, test, rebuild valve as                                        SLI- 02032 necessary. Replace Inlet bolting and    YES / NO:        10/25/02 Replacement: X            nuts.                                          NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 2 Repalr.        V8209      Remove, test, rebuild valve as                                        SLI- 02033 necessary. Replace Inlet bolting and    YES / NO:        102502       L Replacement: X            nuts.                                          NO Corrective                                                                          Interval #3 Measure:                                                                            Period   #2 2 Repair         V8210      Remove, test, rebuild valve as                                        SLI- 02034 necessary. Replace Inlet bolting and    YES I NO:        10/1 9/02 Replacement: X            nuts.                                          NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 4

1     e3 ABSTRACT OF REPAIRS, R~iACEMENTS, OR CORRECTIVE                                 r MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period 2 Repair:          V8212      Remove, test, rebuild valve as                              SLI- 02035 necessary. Replace Inlet bolting and YES / NO: 10125/02 Replacement: X              nuts.                                       NO Corrective                                                                  Interval #3 Measure:                                                                    Period #2 2 Repair:          V8214      Remove, test, rebuild valve as                              SLI- 02036 necessary. Replace Inlet bolting and YES I NO: 10125/02 Replacement: X              nuts.                                       NO Corrective                                                                  Interval #3 Measure:                                                                    Period #2 2 Repair           V8215      Remove, test, rebuild valve as                              SLI 0 necessary. Replace Inlet bolting and YES I NO: 10/25102         - 2037 Replacement: X              nuts.                                       NO Corrective                                                                  Interval #3 Measure:                                                                    Period #2 2 Repair           V3468      Install Spare Valve                  YES I NO: 10/23/02     SLI- 02038 Replacement: X                                                          NO Corrective                                                                  Interval #3 Period #2 2 Repair:          SI-575     Weld in lap joint flange for V3483                          SL1 02039 RI               V3483      Inlet, Line No. 1-2-SI-575           YES / NO: 1015/02      S     023 Replacement: X lNO Corrective                                                                  Interval #3 Measure:                                                                    Period   #2 5

T e3 ABSTRACT OF REPAIRS, REiLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description                Condition Found      Date         Repair/
of Work                       During       Complet l    Replacement Scheduled ISI                 Plan Number Exam or Test ?
2 Repair:        RCB PERS   Replace Interior Equalizing Valve      YES I NO:        10/23/02     SLI- 02041 Replacement: X                                                          NO Corrective'                                                                        Interval #3 Measure:                                                                           Period #2 3 Repair:        V2345      Replace Safety Relief Valve with new   YES/ NO:         10/5/02      SLI- 02042 Replacement: X                                                          NO Corrective                                                                         Interval #3 Measure:                                                                           Period #2 2 Repair         V3468      Increase Relief Set Pressure by        YES I NO:        10/23/02     SLI1 02043 Replacement: X V3483      Replacing SpringNO Corrective                                                                         Interval #3 Measure:                                                                           PerIod #2 3 Repair         ISH-10     Replace corroded items pieces          YESI NO:         10/23/02     SLI- 02044 Replacement: X                                                          NO Corrective                                                                         Interval #3 Measure:                                                                           Period #2 3 Repair         ISH-16     Replace corroded items pieces.       l YSNO:            10/10/02     SLI- 02045 Replacement: X            Modify per CRN                                NO Corrective                                                                         Interval #3 Measure:                                                                           Period #2 6

T. e 3                                                      I)
ABSTRACT OF REPAIRS, R~i3ACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period Flaw or Relevant Description                 Condition Found of Work                         During Scheduled ISI Exam or Test ?
2   Repalr             V8203      Remove, test, rebuild valve as                                           SLI- 02046 necessary. Replace Inlet bolting and     YES I NO:         10/25102 Replacement: X                nuts.                                            NO Corrective                                                                                Interval #3 Measure:
Period #2 3   Repair.            TCV-14-4A  Replace TCV-14-4A                        YES I NO:         10/5/02       SLI- 02051 Replacement: X                                                                 NO Corrective                                                                                Interval #3 Measure:
I  MPeriod                                                                                           #2 2   Repair             1-8-CC-41  Replace Bellows Assembly at                                              SL1 02052 P-19       Penetration P-19. Requires cut and       YES I NO:         10/5/102 Replacement: X                reweld of line 1-8-CC41                          NO Corrective                                                                                Interval #3 Measure:
Period #2 2   Repair             1-8-CC-42  Replace Bellows Assembly at                                              SL1- 02053 P-21       Penetration P-21. Requires cut and       YES I NO:         10/23/02 Replacement: X                reweld of line 1-8-CC-42                         NO Corrective                                                                                Interval #3 Measure:
Period #2 3   Repair:            SB-21163   Replace lCW PP 1A Discharge                                              SL1- 02054 lsolation Butterfly Valve SB-21163.      YES I NO:         10/5/02 Replacement: X               Valve leaks by seat.                             NO Corrective                                                                                Interval #3 Measure:                                                                                  Perid    #
Ill     I                                             l                  gPoriod    #2l 7

I
                                                                                                         .1 T a3                                                'J ABSTRACT OF REPAIRS, REPACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval. 2nd Period 3 Repair.        V21162     Replace ICW PP lA Discharge Check       YE      O  0212        SLI. 02055 Valve V211B2.                           YES I NO: 10/20/02 Replacement: X                                                           NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 2 Repair:        IA-14      Modify Instrument Air line to CTMT. YES I NO: 10/22/02     SLI- 02056 Replacement, X CTMT P9    Class MC Corrective                                                                   Interval #3 Measure:                                                                     Period #2 3 Repair.        CW-1000-11 Replace Rigid Strut                     YES I NO: 10/5/02      SLI- 02057 Replacement: X CW-72NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 2 Repalr.        1-6-SI-425 Replace Flange Bolting due to DBA In    Y   / NO: 10/5/02      SL1- 02058 Replacement: X                                                           NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 2 Repalr.        MS-119     Replace piping due to through wall leak YES/ NO:  10/21/02     SL1- 02059 Replacement: X                                                           NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 8

I. e3 2~
ABSTRACT OF REPAIRS, REi{ACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period Flaw or Relevant Description                 Condition Found of Work                        During Scheduled ISI Exam or Test ?
2 Repair          V18193            Replace Check Valve V18193,                                            SL1- 02060 Instrument Air to CTMT                  YES I NO:        10/23/02      SI 26 Replacement: X                    CLASS MC                                       NO Corrective                                                                                  Interval #3 Measure:
Period #2 3 Repair          SR-21-1A          Replace valve disc assembly.            YES I NO:        10/25/02      SLI- 02062 Replacement: X                                                                   NO Corrective                                                                                  IntNrval #3 Measure:
Period #2 2 Repalr          CTMT SPR PP       Replace Seal Cartridge with new style   YES NO           10t3/02       SLI- 02064 Mechanical SealYEINO1032 Replacement., X                                                                  NO Corrective                                                                                  Interval #3 Measure:                                                                                    Period #2 2 Repalr          V09119            Replace valve body pipe plugs.          YES/ NO:         10/5/02       SLI- 02065 Replacement: X                                                                   NO Corrective                                                                                  Interval #3 Measure:
IIIIIPeriod                                                                    #2l 3 Repain          SJ-21-4A          Replace expansion joint                 YES I NO:        10/05/02      SLI- 02066 Replacement: X  ICW PP IA NO Corrective                                                                                  Interval #3 Measure:                                                                                    Period #2 9

A 4.
ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period         .
Flaw or Relevant Description                      Condition Found of Work                             During Scheduled ISI Exam or Test ?
2 Repair:           V09135     Replace valve body pipe plugs.               YES I NO:          1016102      S 02067 Replacement: X                                                                   NO Corrective                                                                                    Interval #3 Measure:                                                                                      Period #2 3 Repair            MV-09-11   Replace valve plug (I.e., Internal disc)     YES I NO:          10/24102     SLI- 02068 Replacement: X                                                                   NO Corrective                                                                                    Interval #3 Measure:                                                                                      Period #2 2 Repair.           SG IA      Repair secondary side handhole stud                                          SI    27 Replacement: X hole threads with hellcoil.                  YES I NO:
NO 10124102     SL1- 02070 Corrective                                                                                    Interval #3 Measure:                                                                                      Period #2 2 RepaIr:           V2340      Replace valve wedge                          YES I NO:          10/7/02      SLI- 02071 Replacement: X                                                                   NO Corrective                                                                                    Interval #3 Measure:                                                                                      Period #2 2 Repair:           MV-08-3    Replace pilot valve stem and main disc.                                         YES!I NO:          10/10/02 SL1-SI 27 02072 Replacement. X                                                                   NO Corrective                                                                                    Interval #3 Measure:        I          I2 Ill  I                                                   l                  lPeriod     #2 10

T    93                                                       1
                                                                                                                 ./
ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period r  _.
Flaw or Relevant Description                Condition Found of Work                        During Scheduled ISI Exam or Test ?
2 Repalr         SG 1A         Replace Handhole studs                  YES I NO:         10/25/02     SL1- 02073 Replacement: X                                                               NO Corrective                                                                              Interval #3 Measure:                                                                                Period #2 2 Repair:        FCV-07-IA     Replace Body to Bonnet studs and        YES NO:           10/23/02     SLI- 02074 nuts                                    YSI N:1/30 Replacement: X                                                               NO Corrective                                                                              Interval #3 Measure:                                                                                Period #2 2 Repair         1-059, 1-062, Replace Snubbers due to failure ofSI1027 Repalr         1             functional test. Sample Plan.           YES I NO:         10/20/02     SL1- 02075 Replacement: X                                           .YES Corrective                                                                              Interval #3 Measure:                                                                                Period #2 2 Repair:        V08148        Replace Body to Bonnet studs and        YESI NO:          10/16/02     SL1- 02076 nuts                                    YSIN:1/60 Replacement: X                                                               NO Corrective                                                                              Interval #3 Measure:                                                                                Period #2 2 Repair         V08117        Replace Body to Bonnet studs and        YES/NO:           10/23/02     SL1- 02077 Replacement: X                                                               NO Corrective                                                                              Interval #3 Measure:                                                                                Period #2 11

J T '33                                                       IJ ABSTRACT OF REPAIRS, REiLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period    .:
Flaw or Relevant Description                  Condition Found of Work                         During Scheduled ISI Exam or Test ?
I Repair         RX HEAD   Replace Guide Sieves 17 & 68             YES I NO:        10123102     SI1- 02078 Replacement: X                                                           NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 2 Repair:        HCV-08-2A REPLACE wom valve plug.                  YES I NO:        10/23/02     SLI- 02080 Replacement: X                                                           NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 Repalr         V1402     Replace Pilot Disc and Spring, Bolting   YES I NO:        10/23/02     SLI- 02081 Replacement: X                                                           NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 Repair         V1404     Replace Inlet Bolting                    YES I NO:        10/23/02     SLI- 02082 Replacement: X                                                           NO Corrective                                                                          Interval #3 Measure:                                                                            Period #2 2 Repair         AFW PP1A  Replace Mechanical Seal Flange and                                     SL1 02083 boltIng                                  YES I NO:        10/23/02      L 028 Replacement: X                                                           NO Corrective                                                                          Interval #3 lMeasure:                                                                           Period #2 12

T    33 ABSTRACT OF REPAIRS, RVI{LACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description          Condition Found of Work                  During Scheduled ISI Exam or Test ?
3 Repair:        CC-25-7   Replace Support beam (W6) removed                               SLI- 02084 for concrete work per CRN         YES I NO:        10/23/02 Replacement: X           02089-10345                              NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 3 Repair         SR-21-1B  Install Spare Relief Valve        YES I NO:        12113102     SLI- 02086 Replacement: X                                                    NO Corrective                                                                   Interval #3 Measure:                                                                     Period #2 13

St. Lucie Unit 1 Docket No. 50-335 L-2005-179 Enclosure 2 Page 1 of 15 ENCLOSURE 2 FORM OAR-1 Owner's Activity Report Refueling Outage SLI-19

Form OAR-1 Owner's Activity Report Report Number:lSl-PSL-1 -2004 Owner              Florida Power and Light Company P.O. Box 529100 Miami, Florida 33152 Plant:             St. Lucie Nuclear Power Plant Unit 1 6501 South Ocean Drive Jensen Beach, Florida 34957 Commercial Service Date: December21,1976              Refueling Outage No.: SL1-19 Current Inspection Interval: Third            Current Inspection Period: Second Edition and Addenda of Section Xi applicable to the inspection plan: 1989, and for section IWE, 1992 Edition with addenda through 1992 (IWL not applicable to St. Lucie Unit 1).
Date and Revision of inspection plan: May 21, 2004 Rev.3 Edition and Addenda of Section Xi applicable to repairs and replacements, if different than the Inspection plan: Same CERTIFICATE OF CONFORMANCE I certify that the statements made In this Owners Activity Report are correct, and that the examinations, tests, repairs, replacements, evaluations, and corrective measures represented by this report conform to the requirements of Section Xl.
Certificate of Authorization No.: N/A           Expiration Date: N/A Signed                                  C-XZ If4T                     Date_______
Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Florida and employed by HSBCT of Hartford Connecticut have Inspected the items described in this Owner's Activity Report, during the period IO-V-os-02                to 4-19-OS                   , and state that to the best of my knowledge and belief, the Owner has performed all activities represented by this report in accordance with the requirements of Section Xi.
By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations tests, repairs, replacements, evaluations, and corrective measures described In this report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected with this inspection.
_ _ __      _       _      _   _       _Commissions               '      4'      (1, C, /,,
Inspectors Signaturo                                          National Board, State, Province, and Endorsements Date               4 /19-04

TABLE 1 (Post 2004 Outage)
ABSTRACT OF EXAMINATIONS AND TESTS Total                    Total                           Total.                    Total Examinations Examination  Examinations       Examinations                         Examinations Category    Required for          Credited for                       Credited (%)           Credited (%) to                                    Remarks the Interval          this period                      for the period               Interval B-A             27                         0                           0%                         4%
B-B             7                          2                          100%                       57%
B-D             36                        10                          100%                       50%
B-E     Covered under site pressure test program B-F     RR#19 was approved for FPL to implement a risk informed inspection program during the 2nd period. B-F Items are included in the Category R-A population B-G-1            7                          3                          100%                       43%               (1 of the 7 items required only if disassembled), RR# 10
____  ___  _______                                         ___    ___J    __    ___    ___    ___     and RR#18 apply B-G-2            22                         8                          100%                       59%
B-H     Code Case N-509 applies. Category B-H items are included with Category B-K B-      RR#19 was approved for FPL to implement a risk informed inspection program during the 2nd period. B-J items are included in the Category R-A population B-K             5                          3                          100%                       60%               Code Case N-509 applied, RR#8 allows code %
_ __ _ _ _ _ __ _ _ __ _ __ __ __   _ _ _ _ _ _  _ _ _ _   _ _ _  _ _ _  _ _ _ _ _ _   d eviation B-L-1             2                         0                           0%                         0%               Code Case N-481 Applied B-L-2             1                         0                           0%                         0%               Required only if Pump disassembled B-M-1    There are no B-M-1 valve body welds B-M-2             4                          1                          100%                       50%               1 of each group required when disassembled B-N-1            27                         9                          100%                       67%               Each item must be examined each period B-N-2            25                         0                           0%                         0%
B-N-3            29                         0                           0%                         0%
B-O             3                          0                           0%                         0%
B-P     System pressure tests are performed In accordance with plant procedures. Quantification of the number of tests Is not practical.
At the end of the interval, FPL will ensure that 100% of the systems have been tested.
B-0     Steam Generator tubing is examined In accordance with Plant Technical Specifications. See the NIS-BB for details.
C-A              4       l                 2                  l       100%           l           50%             l RR#8 allows code % deviation

TABLE 1 (Post 2004 Outage)
ABSTRACT OF EXAMINATIONS AND TESTS Total              Total Exm~natI               Total Examinations          Total Examinations Examination  Examinations       Eam aions         Eaiton,           Credited (%/) to*                             Remarks Category   Required for       Credited for      Credited (%)      CrDate for the the Interval       this period'     for the period       Interval C-B             5                  2               100%              80%            RR#8 allows code %deviation C-C             4                  1               100%              50%            Code Case N-509 Applied C-D             1                  0                0%                0%            _
C-F-1           69                 25               100%              57%            total count req. Reflects circ welds only Less than 28 welds would be required if 7.5% criteria Is C-F-2           28                 10               100%              68%            followed, FPL raised the total count to 28 per note 2, total count req. reflects circ. Welds only C-G     No category C-G Items C-H     System pressure tests are performed In accordance with plant procedures. Quantification of the number of tests Is not practical.
       . At the end of the interval, FPL will ensure that 100% of the systems have been tested.
D-A             4        l         1       l       100%      l       50%          l Code Case N-509 Applied D-BA   System pressure tests are performed In accordance with plant procedures. Quantification of the number of tests Is not practical.
D-B     At the end of the Interval, FPL will ensure that 100% of the systems have been tested.
D. C (IWE) E-A        174                 87               100%              50%            100% General Exam required each period Includes exam of 1/3 of moisture barrier (IWE) E-D          8100%                                                63%            Seals and gaskets covered by RR IWE-01 (IWE) E-G          8                  3               100%              63%
F-A,F1.10         57                 19               100%              67%            Code Case N-491-1 Applied for all supports F-A,F1.20         54                 19               100%              69%            Code Case N-491-1 Applied for all supports F-AF1.30          54                 20               100%              70%            Code Case N-491-1 Applied for all supports F-A,F1.40         13                  6               100%              77%            Code Case N-491-1 Applied for all supports, RR198 13          ____    6_100%_77%
I____                                    allows code % deviation IWL     St. Lucie does not have a concrete containment. No examinations are required.
R-A     RI     244I                8               100%
00               58%RR#
58I                  19 applied, program   Inthe 2ndFPL imolemented outage  of the 2ndaperiod risk informed of the Intervl

TABLE 2 ITEMS WITH FLAWS OR RELEVANT CONDITIONS THAT REQUIRED EVALUATION FOR CONTINUED SERVICE Examination     Item        Item           Flaw      Flaw or Relevant Condition Found Category     Number   Description Characterization During Scheduled Section XI
                       .                 (IWA-3300)   Examination or Test (Yes or No)
There were no flaws or relevant conditions that required evaluation for continued service.

Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description                Condition Found of Work                       During Scheduled ISI Exam or Test ?
3 Repair        X ICW PP 1B  Remove pitting and repair by welding     YES I NO:   NO   6111/03     SL1- 02047 Replacement:               as necessary.                                             Interval #3 Corrective                                                                           Period #2 Measure:
I Repair        X SE-02-4    Remove/Reweld body to bonnet seal                         4/6/04      SI1- 02048 Replacement: X            weld. Replace Pilot Disc.                 YES / NO:   NO   Interval #3 Corrective                                                                           Period #2 Measure:
Repar         X SE-02-2    Remove/Reweld body to bonnet seal        YES NO:     NO   415/04      SLI-- 02049 Replacement:              weld                                                       Interval #3 Corrective                                                                                    #2 Measure:Peid#
Repair        X Stls02-3   Remove/Reweod body to bonnet seal        YES I NO:   NO   4/128/04    SLI- 02050 Replacement:              weld                                                       Interval #3 Corrective                                                                           Period #2 Measure:
B Repair        X V2325      Install nuts, rod, disc, nozzie, spindle YES I NO    NO   12/16/02    SI1- 02087 Replacement:              assembly, spring assembly, and rod.                        Interval #3 Corrective                                                                           Inerval #3 Measure:                                                                             Period   #2 3 Repair:         V14151     Replace disc due to wear Inthe hinge     YES!I NO:   NO   12118/02    SLI- 02088 Replacement: X            pin areaInevl3 Corrective                                                                           interval #3 Measure:                                                                             Period #2 2 Repair:         V2324     Replace valve with rebuilt spare.         YES! NO:    NO   3114/03     SLI- 02089 Replacement:, X                                                                      interval #3 Corrective                                                                           Period #2 Measure:
I

a Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL    I  - 3rd Interval, 2nd Period Code Class fReplacement Replaceren or Item Description Description of Work Conditwon Flawtio Found During Foruelvnt    Date Complete Repair/
Replacement Corrective                                                      Scheduled ISI                    Plan Number Measure                                                       Exam or Test?                      .        -
2   Repair:        V2326        Replace valve with rebuilt spare. YES I NO:       NO    3/14/03     SI1- 03090 Replacement: X                                                                         Interval #3 Corrective                                                                             Period #2 Measure:Peid                                                                                     2 3   Repair:        SB21386      Replace Butterfly Valveo             YES NO:        NO     9/4103      S 03091 Replacement: X                                                   YE     O          O   Interval #3 Corrective                                                                             Period #2 Measure:
3    Repair         SB21236      Replace manual butterfly valve.      YES/ NO:        NO    4113/04     SLI- 03094 Replacement: X                                                             .           Interval #3 Corrective                                                                             Period #2 Measure:
3    Repair     t   V21205       Replace boling.YES                 /       NO:      NO     8/29103     SLI- 03096 Replacement: X SJ-21-4C                                          YE     O          O   Interval #3 Corrective                                                                             Period #2 Measure:                               _
3   Repalr         V21205       Replace Valve V21205 due to                                8/29/03     SI1- 03097 Replacement: X              vulcanized seat and liner damage. YES I NO:      NO     Interval #3 Corrective                                                                             Period #2 Measure:Peid                                                                                     2 3   Repalr         V21208       Replace IB ICW PP Discharge Check    YES/ NO:        NO    9/2/03      SLI- 03098 Replacement: X SJ-21-4B     Valve - PM                                     .           Interval #3 Corrective                                                                             Ierval #3 Measure:                                                                               Period #2 2    Repair.        CHG PP 1A    Replace stuffing boxes and                                 11/21103    SLI- 03101 Replacement: X              associated fasteners                 YES I NO:      NO     Interval #3 Corrective                                                                             Period #2 Measure:Peod                                                                                     2 2

k Table 3                                                t ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period I   Repair:         SE-02-2    Replace Main Disc & Pilot Disc        YES I NO: NO 41704        SLI- 03102 Replacement: X                                                                 Interval #3 Corrective                                                                     Period #2 Measure:Peid#
I   Repair:         SE-02-3    Replace Main Disc & Pilot Disc        YES I NO: NO 4128/04      SLI- 03103 Replacement: X                                                                Interval #3 Corrective                                                                     Period #2 Measure:
2   Repaic:         SB14320    Replace Butterfly Valve and Bolting   YES I NO: NO 1213/04      SLI- 03104 Replacement: X                                                                 Interval #3 Corrective                                                                     Period #2 Measure:
2   Repair:         V03108     Replace Valve Disc & Stem             YES I NO: NO 4/4/04       SLI- 03106 Replacement: X                                                                 Interval #3 Corrective                                                                     Period #2 Measure:
Repair:         V1202      Remove/Replace Code Safety Relief                  4126/04      SLI- 03108 Replacement., X            Valve, Replace Inlet Bolting          YES / NO: NO  Interval #3 Corrective                                                                     Period #2 Measure:
I Repair:         V1201      Remove/Replace Code Safety Relief     YEINO     No 4204         SI039 Replacement: X            Valve, Replace Inlet Bolting               I NO: NO 4126104aYlS SL- 03110 Corrective                                                                     Period #2 Measure:
3   RepaIr:         SR.21-1A   Bench Test, rebuild and Install spare YES I NO: NO 3/27/04      SLI- 03110 Replacement:  X            relief valve.                                       Interval #3 Corrective                                                                     Period #2 Measure:
3

II 0
                                                                                                                  .. I I
Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Repair,                                                     Flaw or Condition Found Relevant Flaw or Relevant Code   Replacement Replacement          Item                  Description          Condition Found Class         or       Description                  of Work                 During Corrective                                                      Scheduled ISI Measure                                                       Exam or Test ?
Corrective Measure                                                       Scheduled Exam        ISI orTest?
3   Repair          SR-21-1 B      Remove Valve, Replace With Blind                    4113104     SLI- 04111 Replacement:  X                Flange                            YES I NO:    NO   Inevl3 Corrective Measure:                                                                           Period #2 2   Repair:         V2337          Replace corroded body/bonnet nuts                   4/8/04      SLI- 04112 Replacement: X                 Replace disc.                     YES/ NO:     NO   Interval #3 Corrective                                                                         Period #2 Measure:
Repair          V3143          Replace Disc                      YES NO:      NO   4/26/04     SLI- 04115 Replacement: X                                                                     Interval #3 Corrective                                                                         Period #2 Measure:
Repalr          SDC Headers    Modify restraints as noted in     YES I
* NO   4/14/04     SL1- 04116 Replacement: X  Si Supports as MSP-03087                                           Interval #3 Corrective      SI-1 10 Measure:        Sl-968-210                                                         Period #2 2   Repair          V8211          Replace Main Steam Safety Valve                     4/26/04     SLI- 04119 Replacement: X                 Inlet Flange Bolting.             YESInterval                #3 Corrective                                                                         Pneriod #2 Measure:                                                                           Period   #2 2   Repair          V8202          Replace Main Steam Safety Valve                     4/26/04     S 04120 Replacement: X                 Inlet Flange Boling.              YESInterval                #3 Corrective                                                                         Perlod   #2 Measure:Peid                                                                                 2 2   Repair:         V8213          Replace Main Steam Safety Valve                     4/26/04     SI1- 04121 Replacement: X                 Inlot Flange Bolting.             YESInterval                #3 Corrective                                                                         Pervod   #2 Measure:Peid                                                                                 2 4

Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period                                                       -
Flaw or Relevant Description                         Condition Found     Date          Repair/
of Work                                 During      Complete    Replacement Scheduled ISI               Plan Number Exam or Test ?
_________________________________________________ I 2 Repair          V8201          Replace Main Steam Safety Valve                                     4/26/04     SLI- 04122 Replacement: X                 Inlet Flange Bolting.                              YS NO:           Interval #3 Corrective                                                                                                  #3 Measure:                                                                                           Period #2 2 Repair          P-25          Replace Fuel Transfer Flange Bolt.                  YES! NO:     NO  4/19/04     SLI- 04124 Replacement: X                                                                             .       Interval #3 Corrective                                                                                         Perlod #2 Measure:Peid                                                                                                 2 3 Repair          CW-13         Replace portions of ISH-5 degraded                                   4114/04     SLI- 04126 Replacement: X  ISH-5         by corrosion.                                       YES I NO:    NO  Interval #3 Corrective Measure:                                                                                           Period #2 3 Repair          HCV-14-8A     Change out valve bolting during                     Y    I NO:   NO  3/25/04     SL1-  04128 Replacement: X  HCV-14-8B     operation                                                            Interval #3 Corrective      HCV-14-9                                                                           itrval #3 Measure:                                                                                           Period #2 3 Repair          SS-21-IA      Replace broken anode retaining stud                 YE NO        NO  3/24104     SLI- 04132 Replacement: X                                                                       SI :          Interval #3 Corrective Measure,                                                                                           Period #2 2 Repair:        CC-40. CC-41   Modify Pipe Supports per MSP 03110                  YES I NO:    NO  4/13/04     SLI- 04133 Replacement: X                                                                                     Interval #3 CorrectivePeid#
Measure:                                                                                                    #2 3 Repair.          CAFW PP      Replace Governor Valve Bonnet                       YES! NO:     NO  4/10/04     SLI- 04135 Replacement: X                Bolting                                                              Interval #3 Corrective Measure:                                                                                           Period #2 5

Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE                                     a MEASURES REQUIRED FOR CONTINUED SERVICE PSL 1 - 3rd Interval, 2nd Period Flaw or Relevant Description            Condition Found of Work                   During Scheduled ISI Exam or Test ?
3 Repair         V09123    Replace 1B AUX FW PP discharge     YES / NO    NO   44/04        SLI- 04136 Replacement: X           check valve.                                        Interval #3 Corrective                                                                   Period #2 Measure:
3 Repair         HCV-14-8B Replace Butterfly Valve            YES I NO:   NO   4/7/04       SI1- 04137 Replacement: X                                                               Interval #3 Corrective                                                                   Period #2 Measure:
I Repair:        V1200     Remove/Replace Code Safety Relief                   4126/04      SLI- 04139 Replacement: X           Valve, Replace Inlet Bolting       YES I NO:   NO   Interval #3 Corrective                                                                   Period #2 Measure:
1 Repair         V3247     Replace disc, replace Bonnet bolts YES I NO:   NO   4/7/04       SI1- 04140 Replacement: X                                                               Interval #3 Corrective                                                                   Period #2 Measure:
2 Repair:        V08117    Replace Bonnet Nuts due to normal                   4/11/04      SL1- 04141 Replacement: X           maintenance wear                   YES I NO:   NO   Interval #3 Corrective                                                                   Period #2 Measure:                                                                         r 3 Repair         CC-26-5   Replace Strut.                     YES I NO:   NO   4/8/04       SI1- 04142 Replacement: X                                                               Interval #3 Corrective                                                                   Period #2 Measure:
2 Repair         HCV-08-2B Replace valve HCV-08-2B, the       Y                4/17/04      SI1- 04143 Replacement: X           Atmospheric Dump Valve.            YES I NO:   NO    Interval #3 Corrective                                                                    Period #2 Measure:Peid#
6

Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Found I              -     -
Repair, V                                      Flaw or Relevant Condition Flaw or Rolovant Code     Replacement        Item                  Description             Condition Found Class           or      Description                 of Work                      During Corrective                                                         Scheduled ISI Measure                                                           Exam or Test ?
I       J. Corrective Measure                 .1.                                  A Exam Scheduled 151 orTest?
3     Repair         SB21209        Replace Butterfly Valve             YES I NO:     NO   4/26/04     SI1- 04144 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 Measure:
2     Repair         V08163         Replace Bonnet BoWling              YES I NO:     NO   4/26/04     SLI- 04145 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 Measure:
3     Repaic:      X CVN-i1         Weld Buildup                         YES I NO:    NO   4/5/04      SLI- 04146 Replacement:                                                                         Interval #3 Corrective                                                                           Period #2 Measure:
2     Repair         V07000         Replace BoFling                      YES I NO:    NO   4113/04     S.1- 04147 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 Measure:
I     RepaIc:        PCV-1E00-F     Replace Body/Bonnet Bolting         YES I NO:     NO   4/26/04     S.1- 04148 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 2     Repair:        CH-103         Replace Flange Bo#ling              YES (NO:      NO   4/26/04     SL1- 04149 Replacement: X                                                                       Interval #3 CorrectiveProd                                                                                 2 Measure:Peid#
I     Repair:        RX VESSEL      Replace ICI Upper Quick-Loc Flange  YES I NO:     NO   4/17/04     SLI- 04150 Replacement: X                                                                       Interval #3 Measure:Peid#
7

I Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description         Condition Found of Work                 During Scheduled ISI Exam or Test ?
2 Reparn       X MS-28         Remove dents/hammer marks         YES / NO:   NO   4/19/04     SLI- 04151 Replacement:                                                                    Interval #3 Corrective                                                                      Period #2 Measure:
2 Repair:        V09280        Replace hinge cover bolts, nuts   YES / NO:   NO   4/13/04     SLI- 04152 Replacement: X                                                                  Interval #3 Corrective                                                                      Period #2 Measure:
2 Repaic:        V08148        Replace Bearing Assemblies,       YES I NO:   NO   4/28/04     SLI- 04154 Replacement:                 including Integral end caps.      YESntO:NOva2/0               SL-045 Corrective                                                                      Period #2 Measure:
2 RepaIr:        LCV-2110P     Replace disc/spindle assembly     YES / NO:   NO   4/1004      SI1- 04155 Replacement, X                                                                  Interval #3 Corrective                                                                      Period #2 Measure:
Repair:        SI-149        Modify Support SIH-210 per PCM    YES a NO:   NO   4/16/04     SI1- 04156 Replacement: X                                                                  Interval #3 Corrective                                                                      Period #2 Measure:
2 Repair:        MS-28         Replace Load Pins and Spherical   YE     O     O   4(19/04     SLI- 04157 Replacement: X Snubber 1-034 bearings.                         YSIN:N            nevl#
CorrectivePeid                                                                            2 Measure:Peod#
Repair         V1404         Replace Inlet Bolting             YES / NO:   NO   4/26/04     SLI- 04158 Replacement: X                                                                  Interval #3 Corrective                                                                      Period #2 Measure:
8

Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period C     Repair,                                                          Flaw or Relevant Code     Replacement                             Description                 Condition Found     Date         Repair!
Class           or       Description               of Work                        During      Complete     Replacement Corrective                                                         Scheduled ISI                Plan Number Measure                                                           Exam or Test?
I     Repair          V1402        Replace Inlet Bolting                   YES / NO:   NO   4126/04     SI1- 04159 Replacement: X                                                                        Interval #3 Corrective                                                                                     #2 Measure:Peod#
2     Repair:       X SI-134       Remove Arc Strike from Pipe             YES I NO:   NO   4/19/04     SI1- 04160 Replacement:                                                                          Interval #3 Corrective                                                                            Period #2 Measure:
2     Repair.         MS-1076-2113 Replace structural bolting in restraint YES I NO:   NO   4/19104     SI1- 04162 Replacement: X               MS-1076-2113                                             Interval #3 Measre~tv                                                                             Period #2 2     Repair:         MS-13        Replace clamp bolting on restraint      YES I NO:   NO   4/26/04     SI1- 04164 Replacement:, X              MS-1076-1 166.                                           Interval #3 Corrective                                                                            Period #2 Measure:
3     Repair          PURIF IX lB  Replace manway strongback bolting       YES! NO:    NO   4/28/04     SI1- 04165 Replacement: X                                                                        Interval #3 Corrective                                                                            Period #2 Measure:
3     Repalr        X PURIF IX 1B  Seal Weld Manway                        YES ! NO:   NO   8/27104     SI1- 04166 Replacement:                                                                          interval #3 Corrective                                                                            Period #2 Measure:
3     Repair          TCV-14.4A    Rebuild Henry Pratt Valve S/N-                           9/15/04     SLI- 04167 Replacement: X               DD-292-1-1.                             YES I NO:   NO   Interval #3 Corrective                                                                            Period #2 Measure:
9

Wi, Table 3 ABSTRACT OF REPAIRS, REPLACEMENTS, OR CORRECTIVE MEASURES REQUIRED FOR CONTINUED SERVICE PSL I - 3rd Interval, 2nd Period Flaw or Relevant Description                  Condition Found of Work                         During Scheduled ISI Exam or Test ?
3 Repair         CCW HX 1B  Replace Channel Head Bolting              YES I NO:   NO   9118104     SI1- 04168 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 Measure:
2 Repair         V2326      Remove/Replace V2326 per N-508-1          YESd NO:    NO   2)2105      SI1- 04169 Replacement: X                                                                       Interval #3 Corrective                                                                           Period #2 Measure:
2 Repair.:       V07256     Replace Check Valve and associated        YES NO      NO   117/05      SL1- 04170 Replacement, X           piping by welding                          YESterNO:   NO Corrective                                                                           Inerial #3 Measure:                                                                             Period   #2 3 Repair         V21205    Replace Expansion Joint and Bolting        YES! NO:    NO   12/16104    SLI- 04171 Replacement: X SJ-21-4u                               b                              Interval #3 Corrective                                                                           Period #2 Measure:
2 Repalr     ~   V2324     Install tested spare relief valve for IC   YEINO       NO   1304        SI017 Replacement: X           CHG PP Disch using new bolting             YESnNOeNO        1 va/0      SL-047 Corrective                                                                           Pneraio #3 Measure:Peid#
10}}