View source for L-13-076, 10 CFR 50.55a Notification of Impracticality and Requests for Alternatives Supporting the Third and Fourth to-Year Inservice Inspection Intervals

{{Adams
| number = ML13059A315
| issue date = 02/27/2013
| title = 10 CFR 50.55a Notification of Impracticality and Requests for Alternatives Supporting the Third and Fourth to-Year Inservice Inspection Intervals
| author name = Lieb R
| author affiliation = FirstEnergy Nuclear Operating Co
| addressee name = 
| addressee affiliation = NRC/NRR, NRC/Document Control Desk
| docket = 05000346
| license number = NPF-003
| contact person = 
| case reference number = L-13-076
| document type = Inservice/Preservice Inspection and Test Report, Letter type:L
| page count = 66
| project = 
| stage = Other
}}

=Text=
{{#Wiki_filter:FENOCTM RfSlEnergy Nudear Operating Company 5501 Norlh Slate Route 2 Oak Harbor. Ohio 43449 Raymond A Ueb                                                                                           419-321-7676 Vice President, Nuclear                                                                            Fax: 419-321-7582 February 27, 2013 L-13-076                                                          10 CFR 50.55a ATTN: Document Control Desk U.S. Nuclear Regulatory Commission Washington; DC 20555-0001

==SUBJECT:==

Davis-Besse Nuclear Power Station Docket No. 50-346, License No. NPF-3 10 CFR 50.55a Notification of Impracticality and Requests for Alternatives Supporting the Third and Fourth to-Year Inservice Inspection Intervals In accordanceWHh 10 CFR 50.55a, FlrstEnergy Nuclear Operating Company (FENOC) is requesting Nuclear Regulatory Commission (NRC)approvaJ for three proposed; alternatives to certain American Society of Mechanical Engineers Code requirements for the Davis-Besse Nuclear Power Station. Enclosures A through C identify the affected components, applicable code' requirements, reasons for the requests, proposed alternatives, basis for their use., and durations. Enclosure 0 Is a, notification of impracticality related to weld examinations where the required examination coverage of "essentially 100' percent" was not achieved.
The proposed alternatives would be implemented in support of the to-year inserviC8 inspection intervals cited in the individlJal requests. Request RR-A37 requires implementation prior to September2Q, 2013. Requests RR:-A1 and RR..B1 would be implemented In support ofthe winter 2014 refueling outage, which is currently scheduled to begin in February 2014. Therefore, FENOe Is requesting NR.C approval of the alternatives as follows:                                                    .
o Request RR-A1 by February 28,. 2014 o Request RR-A37 by September 18,2013 o Request RR-B1by February 28, 2014 The notification of impracticality, Request RR-A36, is in support ofthe third to.;year inservice inspection interval, which expired on September 20, 201.2.

Davis-Besse Nuclear Power Station L-13-076 Page 2 of2 There are no regulatory commitments contained in this submittal. If there are any questions or additional 'information is required; please contact Mr. Thomas A. Lentz, Manager-:- Fleet licenSing, at (330) 315-6810.
st:dCf-!/
Raymond A. Ueb          '

==Enclosures:==

A. Davis-Besse Nuclear Power Station, 10 CFR 50;55a Request RR*A1 B. Davis-Besse Nuclear Power Station, 10 CFR 50 . 55a Request RR-A37 C, Davis~Besse Nuclear Power Station, 10 CFR 50.S5a Request RR-B1 D. Davis-Besse Nuclear Power Station, 10 CFR 50.55a Request RR-A36 cc:    NRC ,Regioh III Administrator NRC Resident Inspector NRC Project Manager Utility RadlQlogical Safety Board

Davis-Besse Nuclear Power Station 10 CFR 50.55a Request RR-A 1 Page 1 of4 Proposed Alternative in Accordance with 10 CFR 50.55a(a)(3)(i)
                --Alternative Provides Acceptable Level of Quality and Safety--
: 1. American Society of Mechanical Engineers (ASME) Code Components Affected Components:                           Not Applicable Code Class:                           Class 1, 2, 3, and MC Examination Category:                 Not Applicable Code Item Number:                     Not Applicable

===2. Applicable Code Edition and Addenda===
American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," 2007 Edition through 2008 Addenda.
: 3. Applicable Code Requirements ASME Section XI contains the following requirements regarding the use of Form NIS-1, Form NIS-2, and the preservice and inservice inspection summary reports:
IWA-4331(d) Form NIS-2 shall be completed for rerating, except for rerating component supports.
IWA-6210(c) The Owner shall prepare preservice and inservice inspection summary reports for Class 1 and 2 pressure retaining components and their supports.
IWA-6210(d) The Owner shall prepare the Owner's Report for Inservice Inspections, Form NIS-1, for preservice and inservice examination of Class 1 and 2 pressure retaining components and their supports.
IWA-6210(e) The Owner shall prepare the Owner's Report for Repair/Replacement Activity, Form NIS-2, upon completion of all required activities associated with the Repair/Replacement Plan.
IWA-6210(f) The Owner shall submit Forms NIS-1 and NIS-2 to the Inspector and obtain the required signatures.
IWA-6220 The abstract shall include a list or table of examinations and tests containing the following:
: a. component examined or tested
: b. Code Class
: c. Code Examination Category and Item No.
: d. examination or test method
: e. Code Cases
: f. number and percentage of examinations completed when required by IWB-2411, IWC-2411, and IWF-2410

Request RR-A1 Page 2 of4
: g. reference to the abstracts of the conditions noted and the corrective actions recommended and taken for flaws detected during examinations or tests performed.
IWA-6230(b) An in service inspection summary report to be prepared following each refueling outage. Examinations, tests, and repair/replacement activities conducted since the preceding summary report shall be included.
IWA-6230(c)(2) references [Mandatory] Appendix II for Form NIS-1.
IWA-6230(c)(3) references [Mandatory] Appendix II for Form NIS-2.
IWA-6230(d) Summary reports shall have a cover sheet providing the following:
: 1. date of document completion
: 2. name and address of Owner
: 3. name and address of plant
: 4. name or number designation of the unit
: 5. commercial service date for the unit IWA-6240(b) The inservice inspection summary report shall be submitted within 90 calendar days of the completion of each refueling outage.
IWA-6350(d) requires that Form NIS-2 Form be retained as a record of repair/replacement activities.
Mandatory Appendix II includes both Forms NIS-1 and NIS-2. Also included in the Appendix is the guide for completing both forms.
Mandatory Appendix IX, Article IX-1000(e) Welding shall be documented on an NIS-2 Form.

===4. Reason for Request===
Code Case N-532-4, which is applicable to ASME Section XI, 1981 Edition with Winter 1983 Addenda through the 2004 Edition with 2005 Addenda, was approved for use in Regulatory Guide 1.147 Revision 16. Per IWA-2441 (b), Code Cases shall be applicable to the ASME Code edition and addenda specified in the inspection plan.
The current inspection plan, which commenced on September 21,2012, specifies ASME Section XI, 2007 Edition through 2008 Addenda as the applicable ASME Code edition and addenda. Therefore, Code Case N-532-4 is not applicable.
: 5. Proposed Alternative and Basis for Use Proposed Alternative:
In lieu of ASME Section XI requirements, FirstEnergy Nuclear Operating Company (FENOC) requests the use of Code Case N-532-5, as permitted by 10 CFR50 55a(a)(3)(i), in lieu of applicable Code requirements.
Basis for Use:
Code Case N-532-4 was approved for use in Regulatory Guide 1.147, Revision 16.
However, the applicability of Code Case N-532-4 does not extend to ASME Section XI, 2007 Edition through 2008 Addenda.

Request RR-A 1 Page 3 of4 Code Case N-532-5 was published in the 2010 Edition of the Nuclear Code Case Book, Supplement 5, and is applicable through the 2010 Edition of the ASME Code, which includes ASME Section XI, 2007 Edition through 2008 Addenda.
FENOC requests the use of Code Case N-532-5 as a proposed alternative to all cases where completion of Form NIS-1, Form NIS-2, or a preservice and/or inservice inspection summary report is required in ASME Section XI, 2007 Edition through 2008 Addenda, or any other applied Code Cases. Code Case N-352-5 is considered an acceptable alternative to applicable Code requirements based upon the following:
: 1. The ASME Code requirements of Code Case N-532-4 were not reduced; rather, they were clarified and/or enhanced in Code Case N-532-5.
: 2. In addition to repair/replacement activities, Code Case N-532-5 includes rerating; Code Case N-352-4 did not include this activity.
: 3. Code Case N-532-5 added the requirement that Form NIS-2A shall be completed after satisfying all Section XI requirements necessary to place the item in service and prior to inclusion in an Owners Activity Report; Code Case N-352-4 did not include this requirement.
: 4. Code Case N-532-5, Form NIS-2A and Form OAR-1, were revised to clarify that when listing Code Cases used, the requirement is for "repair/ replacement activities" and "inspection and evaluation," respectively; the forms associated with Code Case N-532-4 did not include this clarification.
: 6. Duration of Proposed Alternative:
The proposed alternative shall be used during the fourth 10-year inservice inspection interval, which commenced on September 21, 2012. The use of this Code Case is requested until the Nuclear Regulatory Commission (NRC) publishes the Code Case In a future revision of the applicable Regulatory Guide.
: 7. Precedent The NRC approved a similar request, submitted as Relief Request RR-2, for the Point Beach Nuclear Plant, Units 1 and 2.
NRC letter to NextEra Energy Point Beach, LLC, 

==Subject:==
Point Beach Nuclear Plant, Units 1 and 2 - Evaluation of Relief Requests RR-2 and RR-3 (TAC Nos.
ME7974 and ME7975), November 15, 2012.             [Accession No. ML12286A104]

Request RR-A1 Page 4 of4
: 8. References 1.' ASME Code Case N-532-4, "Repair/Replacement Activity Documentation Requirements and Inservice Summary Report Preparation arid Submission,"
April 19, 2006.                                         '
2.' ASME Code Case N-532-5, "Repair/Replacement Activity Documentation Requirements and Inservice Summary Report Preparation and Submission,"
January 11, 2011.
: 3. NRC Regulatory Guide 1.147, "Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1," Revision'16, October 2010.
: 4. 10 CFR 50.55a, "Codes and standards," July 21,2011.

Davis-Besse Nuclear Power Station 10 CFR 50.55a Request RR-A37 Page 1 of 5 Proposed Alternative in Accordance with 10 CFR 50.55a(a)(3)(ii)
                                --Hardship or Unusual Difficulty without Compensating Increase in level of Quality and Safety--
: 1. American Society of Mechanical Engineers (ASME) Code Components Affected Components:                  Reactor Coolant System Cold leg Drain Line 1-2 Dissimilar Metal Weld Overlay Code Class:                  Class 1 Examination                  Code Case N-770-1 Category:
Code Item Number:            Inspection Item   "F" Weld Number              Description        Size                 Materials1 RC-40-CCA-18-3-FW9           Cold leg 1-2      Nominal     Carbon Steel Nozzle I Alloy Drain Nozzle      2%           82-182 Weld I Stainless To Pipe           inch 102     Steel Elbow I Alloy 52M Weld Overlay 1Carbon Steel Nozzle: SA-105 Grade 2 (P-1) internally clad with SA-371 ER 308l stainless steel; Stainless Steel Elbow: SA-403 WP 316 (P-8) 210 Inside Diameter

===2. Applicable Code Edition and Addenda===
American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," 1995 Edition through 1996 Addenda.

===3. Applicable Code Requirement===
Table 1, Inspection Item F of ASME Code Case N-770-1, "Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated With UNS N06082 or UNS W86182 Weld Filler Material With or Without Application of Listed Mitigation Activities," with the following conditions:
10 CFR 50.55a(g)(6)(ii)(F)(1) Licensees of existing operating pressurized-water reactors as of July 21, 2011 shall implement the requirements of ASME Code Case N-770-1, subject to the conditions specified in paragraphs (g)(6)(ii)(F)(2) through (g)(6)(ii)(F)(10) of this section, by the first refueling outage after August 22, 2011.
10 CFR 50.55a(g)(6)(ii)(F)(4) The axial examination coverage requirements of
       -2500(c) may not be considered to be satisfied unless essentially 100 percent coverage is achieved.

Request RR-A37 Page 2 of 5

===4. Reason for Request===
Code Case N-770-1, with the condition stated in 10 CFR 50.55a(g)(6)(ii)(F)(4), requires an examination coverage of essentially 100 percent. For Weld RC-40-CCA-18-3-FW9, this coverage requirement was not achieved during the initial inservice examination.
Details:
FENOC's Request RR-A33 for the application of full structural weld overlays (FSWOl) on dissimilar metal welds of the reactor coolant piping was approved by the NRC on January 21, 2010 [Accession No. Ml100080573]. Request RR-A33 included the following discussion and figure:
Reactor Coolant System Cold Leg Drain Line Dissimilar Metal Welds The reactor coolant pump inlet (RCP) lines have a drain connection at the low point of the line. Each cold leg drain nozzle is a vertical 2 % inch carbon steel nozzle that is welded to the carbon steel reactor coolant piping, and is internally clad with stainless steel. The dissimilar metal weld is fabricated from .
Alloy 82/182 weld metal.
Weld Overlay LAS Nozzle EI~
                                                                              .SS CladdIng:
Notes:
: 1. Elbow - SA403, Grade WP316
: 2. Carbon Steel Nozzle -A105, Grade 2, internally clad with SA371 ER308l Figure 5-4: Schematic Configuration for FSWOl for RCP Cold leg Drain line Nozzles As authorized by Request RR-A33, FENOC applied a full structural Alloy 52M weld overlay on dissimilar metal weld RC-40-CCA-18-3-FW9 during the spring 2010 refueling outage.
Code Case N-770-1, -2500(a) states welds shall be examined as specified in Table 1, with the volumetric examinations meeting the requirements of Appendix VIII. Per Table 1, Inspection Item F, Figure 2 provides the examination requirements.
Figure 2(a) from the Code Case is provided below:

Request RR-A37 Page 30f5 FIG. 2(a) EXAMINATION VOLUME IN FUll STRUCTURAL WELD OVERLAYS Minimum '/2 In. (13 mm)       Mlnrmum 'IJln, 113 mm) (Note 4111
                      ~~+dD* *IlF~T                                                                                    r .
__~~~~~~_1 Examination Volume A-B-C-D GENERAL NOTE: The weld Includes the nozzle or safe end butter, where applied.
NOTE:
(1) For axial and circumferential flaws, the axial extent of the examination volume shall extend at least % Inch beyond the as found flaw and at least % Inch beyond the toes of the original weld, Including weld end butter, where applied, plus any PWSCC-susceptible base material in the nozzle and safe-end.
In accordance with Code Case N-770-1, Table 1, Inspection Item F, an initial inservice volumetric examination was completed during the spring 2012 refueling outage, which
   *resulted in approximately 70 percent total aggregate coverage. As stated in the condition of 10 CFR 50.55a(g)(6)(ii)(F)(4), essentially 100 percent coverage is required; this examination coverage requirement was not achieved due to limitations imposed by the weld geometry. An image of the FSWOL is provided as Attachment 1 to this request. Details of the examination limitations are presented in Attachment 2 to this request. This request is processed in accordance with 10 CFR 50.55a(a)(3)(ii), as discussed in the J.*W. Collins' memo to T. R. Lupoid, which summarized a public meeting on Code Case N-770-1 (Reference 1).
ASME Code Case N-460 (Reference 2) best describes the "essentially 100 percent" examination requirement as when the entire examination volume cannot be examined due to interference by another component or part geometry, a reduction in examination coverage may be accepted provided the reduction in coverage for that weld is less than 10 percent. ASME Code Case N-460 is unconditionally approved for use in the NRC's Regulatory Guide 1.147; Revision 16 (Reference 3).

Request RR-A37 Page 4 of 5
: 5. Proposed Alternative and Basis for Use Alternative Examination:
In lieu of the essentially 100 percent coverage requirement, FENOC proposes crediting the aggregate coverage achieved (approximately 70 percent) from the spring 2012 examination. The accessible area was examined with techniques that have been demonstrated and qualified in accordance with Supplement 11 of ASME Section XI, Appendix VIII, for the manual phased array (PA) ultrasonic (UT) examination technique.
Basis for Use:
Code Case N-770-1 and 10 CFR 50.55a(g)(6)(ii)(F)(4) define the required examination volume as essentially 100 percent coverage. The initial inservice examination was completed during the spring 2012 refueling outage. The essentially 100 percent coverage requirement was unattainable due to limitations imposed by the existing nozzle to elbow geometry. Due to these limitations, only 70 percent of the required examination volume was examined with the PA UT technique, which was qualified in accordance with Supplement 11 of ASME Section XI, Appendix XIII. The 70 percent aggregate coverage achieved, which consists of 69 percent axial and 71 percent*
circumferential composite coverage values, represents the maximum practical coverage obtainable within the limitations imposed by the existing geometry. As noted in Attachment 2 to this request, there were no recordable indications identified in this weld that exceeded the acceptance criteria of ASME Section XI. Additionally, a visual VT-2 examination was performed on this weld during the Class 1 pressure test prior to startup from the spring 2012 refueling outage. This visual examination identified no evidence of leakage.
Due to the limitations imposed by the existing nozzle to elbow geometry, similar examination coverage results occurred during the initial 201 0 examinations; no suspected flaws were observed during those examinations.
Due to the configuration/geometry of this nozzle to elbow weld, achieving essentially 100 percent coverage of the examination volume is unattainable without a significant modification to the existing piping. Implementing this type of modification would require a core offload, flushing and draining of the system, and removing/replacing the existing piping with reconfigured piping. Based on radiological survey results from the spring 2012 refueling outage, this work would occur within radiation fields with dose rates up to 500 milli-Rem per hour, resulting in a significant increase in occupational radiation exposure [dose] to personnel.
An image of the FSWOL is provided as Attachment 1 to this request. Details of the examination results, including examination limitations, are presented In Attachment 2 to this request.

Request RR-A37 Page 50f5
: 6. Duration of Proposed Alternative The proposed alternative shall be utilized for the third 10-year inservice inspection interval, which was scheduled to expire on September 20, 2012. As permitted by IWA-2430(d), the third 10-year inservice inspection interval is extended by one year until September 20, 2013, to allow for NRC review and authorization of the proposed alternative prior to crediting the examination.
: 7. Precedent Constellation Energy letter to NRC, 

==Subject:==
 "Calvert Cliffs Nuclear Power Plant, Unit No.1, Docket No. 50-317, Relief Request for Unit 1 Dissimilar Metal Butt*Welds Baseline (RR-ISI-04-06A)," February 9,2012. [Accession No. ML12044A020]
: 8. References
: 1. NRC memorandum, J. W. Collins to T. R. Lupoid, 

==Subject:==
 "Summary of Public Meeting Between the Nuclear Regulatory Commission Staff and Industry Representatives on Implementation of Code Case N-770-01," August 12, 2011.
[Accession No. ML112240818]
: 2. ASME Code Case N-460, "Alternative Examination Coverage for Class 1 and Class 2 Welds," July 27, 1988.                                                  .
: 3. NRC Regulatory Guide 1.147, "Inservice Inspection Code Case Applicability, ASME Section XI, Division 1," Revision 16, October 2010.

Attachment 1 Request RR-A37 Page 1 of 1 Image of Completed Full Structural Weld Overlay (FSWOL)
[Weld RC-40-CCA-18-3-FW9]

Attachment 2, Request RR-A37 Page 1 of21 Report No.: FW9-SWOL A                UT Examination Summary                             ComponentlD:     RC-40-CCA-18-3-FW9 OVERLAY AREVA                                                                      Summary No.:    809.050.010265 Customer:      First Energy          Code Category: N/A                         System:   064*02 (RCS)
Site I Unit:   Davis Besse 11              Co do Item: N/A                      Material: CS I SS Iinconel Outage:     1R17                      Coda Class: 1                    Configuration: 2.5 Inch Branch Connection to Elbow Weld. MK 9 Drawlng(s):     ISIM2-240A, Revision 3 Prol;edure:     54-9077864, Rev. 001 , 54-ISI-864-003 Procedure for Manual Phased Array Ultrasonic Exail1ln~"on of Weld Overlaid Similar and Dlsslmlla.r Metal Welds (64-9077864, Rev. 001-1 EPRI-WOL-PA-1, Rev, 2, 09/17/2009)

==Title:==
Manual Phased Array Ultrasonic Examination of Weld Overiald'Simllar and Dissimilar Metal Welds (64-ISI-664-003)
Callb;atlon*Sheeta                Exam Data Shiata                ,Indication DataSheota         Supplemental She'eta COS-01(Pages 1-3)                        EOS-01                               N/A                CFV-01         CFV-D2 CDS-02 (Pages 1-3)                         N/A                                N/A                CFV-03         CFV-04 CDS.()3.(Pages 1';3)                       N/A                                N/A                COV-01         COV-D2 CDS-04*(Pages 1-3)                         N/A                                N/A                COV-03           N/A Ex.m :Ra.ulta:     No Recordable Indications                       EXa.m Volume Coverage.Obtalned:      I 70%
Amanual.lSI phas'ed array ultrasonl~ exam.\natlon of the full structural wfitld Qvetlay QnRC-40*CCA-18-3-FW9 (0Qldleg Drain '1-2) was peiformed duri!19 the:Oavls Besse 1.R17 refueling outagEt.                                        .
The examination ,volume coverage obtaln$d fot this ,full structural weld-overlay Is'doQum$nted on the Coverag$ Data Sheetaln lhlsreportwhlch Is derived from a compilation of thickness and contours taken during this omega and previous dataoblalned during the 1R10'outage.
UTexamlnatlOn Qf the lSI volume was pedotmed using ASME Section XI. Appendix VIII. Supplement 11 qualified procedures, personnel and equipment as amended by the Final Rule; this UT Insp8ctlonsatisfles the* full structural* weld overlay examlnatlon-requirements,of ASME Code CsSe N:-77G-1.
Total, Dosel 32 mR Personnel                 Name                                    Signature                     Level        Dilte Prepared By: TtoyStelnbauer                        ~~                                   /
III       05-16~12
                                                        ,-~
AREVA Review:         Dan Langenfeld                         'A ..... ~4~g                              III       05-15-12 Customer:       t).mV~~                              ~tf"//                                     ;ar.       stzt/hl.
ANII:   To (..I\P5                       ~~'M -'t,~-,-"                                ~          $"/24-1,)"
Form Edition: Nov 2011 1 Rev 0                                               --U                  Page:       1   0'      21

Attachment 2, Request RR-A37 Page 20f21 A                                PHASED ARRAY UT CALIBRATION DATA SHEET AREVA Customor: Flrsi Energy                       Procedure: 54-9077864 I 54-181-864                  Report No.: FW9-SWOl Site: Oaliis Besse, Unit 1                  Revision: 001/003                                    Calibration Sheet No.: CDS-01 (Page 1 of 3)
Outage: 1R17                                SOCN:N/A                                             Component 10: RC-40-0CA-18-3-FW9 Overlay focal Law: 72-1.5.LAW INSTRUMeNT INFORMATION                         SEARCH UNIT INFORMATION                               CALIBRATION INFORMATION Manufacturer:                    Zetec      Manufacturer:                           GEIT         CliI; Block.IO:                         6D39024 Model:                     OmnlScanMX       ModEll:                            115*000-485       Cel. Blollk Material:                    3048S Serial Number:              OMNI*1635       Serial Number:                       01PBN8          Cal. Block Reflector:                  8eeBeiow
'Software Rev.                    1.4R3      Frequency:                           2.0 MHz         Cal. Reflector Size:                     0.090" Frequency:                      2.0 MHz     CO!1f1gural!on!                     Dual-SBS         Cal, Reflector Depth:                  See Below PRF:                           Optimum      Numbar of Elementa:                      32          Cal. UT Roadll'lg:                     See'Below ReJact:                            0%       Element Arrangement:                   2x16          Cal. Gain Level:                       Se8Beiow Angles Generated:         0*- 80* (1" Inc.) Element Shape:                     Reclangular       Cal. Block Temp.:                          73&deg; Setup File:                     072-1.5     Transducer Size:                 1.75x4.00mm         Thermometer Serial No.:                VH-11842 Delay:                         0:08psec     t# Eleml;IOls at Cal In:                 32          InlllalOal. Dalemme:                5*15*2012/1037 Range:                      :a,908"@OO      t# Elemente at Cal Outl                  32          Oal.V8r1f1caUO"n Blbcle 10:                N/A WEDGE! INFORMATION                  Cable Type:                           Inlegtal       cal VerifloaUon RellEleilor:               N/A Manufacturer:                     GEIT      Cable '-'ngth:                       S'Meters        Cill Verlna"tlori UTReadl"g~               NIA Part Number:                 36D-~52-072    Adaptor Box:                     Omnl*A-AOP03        Cal VerlnaaOon Gain Level:                 N/A M~de:                         longitudinal  Cable Adapter Model:                    NIA          Final Cal. Date/TIme:                05116/12/1047 Nom. Angle:-                        42'     Intermediate Oonnectors:                 0           Couplant'Type:                         Ullragslll Measured Anele:                      42'     , Channelalnoperlitlve                  0/0          Couplant Bat!;h Number:                  0932(j Nomlnai Exit PoInt:"              -0.747"             WEDGE INP-ORMAnON (Cont.)                   Exam Start;                               1038 Me88ured Exit PoInt:;              -0.85"    ElIlt :polnt to wedge backe            'CUS"         Ex,mEndi                                  1045 Wedge Contour:                .6.000"       Ndte:, Till 70**MaIe Is peak amplitude for the .108~ *SDH.. The highest angle that can dltaClly Impl'l9S on .19B" SDI-! Is ~7*. Gain Level Is set using tile '70' allO!' 8S raqulred ~ prOC1Qdl!re.
Wedge Orlentatlon:                  eire Notes: $el Eellen~1I1 Variables UT Calibration Oala SlIeets for' additional calibration Information; High Range Angle      Mid ~rig8 Angte          LoW Rilnge Angla             Functlon Oh,ck and Report file Name (70**86*)              (26"- 80')              (0"- 26*)
Angle                        70',(67&deg;1                40'                     O*             Pre WIWedgu:            072*PRE*W Reflector Depth           0.t9a" SOH              .8011" SOH               U"SDH             Pre WOI Wedgel          072*PRE*WO UT Reading (NIP)          0.947" (.92"'              1.S7"                   1.27"           Post W I Wedge:         072*PST*W Amplitude'                  80%FSH                 80%FSH                 80%FSH             Post WOI Wedga:         072-PST-W Gain Level                    36.4 dB               25.4 dB                24.8 dB           N/A Examiner: Troy A. Slelnbauer                          Levell III          Reviewer: Dan langerifel~                                 Level: III A~/
                                            ~
slgnature~                 ~                         Date: 06/16112      Signature:      ~~                AI                      Date: 05115/12 Utlllty'Rovlew:                                                                                                17?
                   .~~
ANIIRevlew:
Signature:
Date:        I stPlJ,I'l.. Signature:       -r.~ A-Al.tt                             Date:   &#xa3;Ic14( a~
                                                                                                       \1                   Page      2      ot 21

Attachment 2, Request RR-A37 Page 30f21 A                       PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                    (ESSENTIAL VARIABLES)
Customer: First Energy             Procedure: 54*90778641 54*ISI*864                Report No.: FW9*SWOl Slle: Davis Besse, Unit 1          Revlalon: 001 I 003                              Calibration Sheet No.: CDS*01 (Page 2 of 3)
Outago: 1R17                       SDCN: N/A                                        Component ID: RC-40*CCA.18*3*FW9 Overlay Focal LaW: 72*1.5LAW Major Menu Item               Manullem                        Sub*Menu Item                                 Setting Reading                    Resull                             Selector                                      1 Reading                    Resull                              Field 1                                    A%
Reading                    Resull                              Field 2                                    A" Reading                    Resull                              Field 3                                   SA" Reading                    Reaull                              Field"                                    PAA UT                       PUlser                              PulSet                        Imported ftom .LAW file UT                       Pulser                           Tx/RlCmode                       Impprted from .LAW file UT                       Beam                             Gain offsel                       Imported ffom .LAW rde UT                       Beam                                 Angle                         Imported from .lAW file UT                       Beam                             BsamDeliiy                        Imported'from .LAW file UT                     AdVance!!                         'd~'reference                                  0;'
UT                     AdVanced                            PolntaQty                           (Scale Factoi) 8 UT                     AdVanced                            SUII)~aln                        ImJ!(lrted flom .LAW file Dlaplay                   SelliCUilri                         Display                                   A-S'lC)
Display                   SeI8CUon                           ~n1                                          Off DIsplay                   SelecHlln                            Group                                    Curren1 DISplay                   SelecUon                           Projection                                   On Dlspiay                    RUlerll                            UTU!llt                                TNeDepth DlaPlay                    Rlilers                            ~.Ruler                                 tlnear ("4)'
Dlaplay                    Rulers                            DACITGC                                      .Off Display                    Rulera                               Gale                                      On Display                    Rulers                              Cursor                                     Off Display                    Color                               Select                                 AmpIqude Display                    Color                              518".%                                       O.Q Displa),                   Color                               End %                                      100 Plspiay                  ProperUes                             Display                                  A-scan DISplay                  ProperUas                            'Soutee                                   Normal ProbelPaIt                  SeJecl                               Select                               Selecl Tl!IRx Probe/Pall                  Saillel                          AlilODeleel                                    Off Probe/Part                 PoalHon                           scan Offael                                     Ii Examiner: Troy A. Stelnb~                Level: III            _ewer: Dan lang.nfe/~ Level: "I Signatu~                                 Date: 05/16/12 Signature:     APMI ~                                  Date: 05/15/12 Utility Review:       \).M\lN,&~                               ANII Review:
                          ~      -~      Date:     Sh1/1t...                    \..~.              A-~                Date~.Jr'-
Signature:                                                     Signature:
                                                                                           "                PQge 3              'Of   21

Attachment 2, Request RR-A37 Page 4 of21 A                               PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                             (ESSENTIAL VA~IABLES)
Cuelomor: FlralEnergy                     Proceduro:54*90778641 54.151*864                  Roport No.: fWg*5WOL Site: Davis Besse. Unit 1                 Revlelon: 0011 003                                Calibration Shoet No.: CD8*01 (Page 3 of 3) autago: 1R17                              SDCN:NiA                                          Componant ID: RC*40*CCA*18*3*FW9 OVerlay Focal Law: 72*1.5LAW Major Menu 110m                      Manu 110m                        Sub*Manu Item                                     SaltIng Probe/PoIt                        Position                           Indl)x Offset.                                     o Probe/Part                          Parts*                            Geomell)'                                       PI!\te Probe/Part                         Paris                              Thlcknesa                                      10.000 PGMProbe                        ConfigilraUon                                                                       SOCIorisl PGMProbe                        COilliguraUon                       Connecuon P:
PGMProbe                            Laws                            Auto Program                                       Off Gate I AI~lfm                        OtIte .                          Gale setect                                     GaleA Gale/Alann                           Gale                           Gale A SyIlCluq                                   Pulse UT                             General                                Gain                                 Sea Calibration Sheet UT                             General                                Slert                                       0.000 UT                             General                                                                     See CaQbta1lOn Sheet iJT                            General                                                               Sea CalibrQUonShtet (peley) ur                             Geileial                                                             Imported frorri.LAWfil8 (;2272)
UT                              ~ulaer                                Flag UT                              Pula81                              Voltage ut                              Pulset UT                              PuI88l                               *PRF                                       'Opllmum U1".                                                                  Flliar ur                             ReceIver                             Rectiliet                                       FW ur                             ReciI!lver ur                            .Receiver UT                                                                   Reject                                          o UT                              Beam                              bOWsel                                 Imported trom .tAW*flle*
ur                              Beil.m                                                                   Imported (rom',tAWiua UT                                                                  .Skew                                Imporled*from* *.tAWrda Examiner: Troy A. Steinbauer                    Level: III             Reviewer: Oanlangenfeld                          ""AI     Level:.1II Signature:~ ~-=----~.     ~-~;;;;;--~_.-'_-I-~~te~:~O~5~/1~611~2~kSI~g~na=-tu_re-:-:_A~_'IIH_.          _"L-
_:Z;_.'    .T-J..-~~refII'_~~~~!:!~~
4' V                Dale:, 06/151.* 2 Utility ReView:       b~.(V\II"'~dN
                                 ..."""\                               ANII Review!                                                              ~ll Signature:
Date:      I  II.
                                                          ~ at/,ll. Signature:
                                                                                        ~\ _6 -~
                                                                                             *  ..:L......... """'"
A._I.......       Date: ~(".L.
                                                                                                                                           "11,. I,
                                                                                                                                                   \1"\
Page       4     of   2~

Attachment 2. Request RR-A37 Page 50f21 A                              PHASED ARRAY UT CALIBRATION DATA SHEET AREVA Customor: First Energy                       Procedure: 54*90778641 54*181*864                  Report No.: FW9*SWOL Slto: Oavl8Bes80. Unit 1                     Revlelon: 001/003                                  Calibration Sheet No.: C08*02 (Page 1 of 3)
Outege: lR17                                SOCN:NlA                                            Component 10: RC*40*CCA.18*3*FW9 Overlay Focal Law: 72*1.125.LAW iNSTRUMeNT'lNFORMATION                         SEAROH UNIT INFORMATION                              OAIdBRATION;INFORMATION Manufacturer:                 Zetec          Manufaoturer:                        GEIT          Cal. Blook 10:                     8039024 Model:                   OmnlScanMX         Model:                            115*000*485       Cal. Blook Material:                3165S Serial Number:            OMNI*1635         8erlal Number:                      01PBN8          Cill; Block Reflector:            SeeDlililw Software Rev.                 1.4R3         Frequency:                          2.0 MHz         Cal. Reflector SIze:                 0.090' Frequency:                   2.0 MHz        Configuration:                     Oual-SDS         Cal. RDflector Depth:             See Below
'PRF:                         Optimum        Number of Elementa:                    32           Cal. UT Reading:                  See Below Reject:                         0%          Element Arrangement:                 21(16          Cal. Gain Level:                  See Below Anglea,Generated:       0** 80*   (1* Inc.) Elelhent Shape:                   Rectangular       Cal. Block Temp.:                       74&deg; Setup File:                 072*1.126       Transducer Size:                1.75X 4.00 mm       Thatmomater Sarlal No.:            VH,11842 Delay:                       1.SlJsec       II Elements at Cal In:                 32           Inlllal Cal. Datumme:          5*15-2012/1022 Range:                    2.908"@OO         tI Eilements at Cal out:               32           Cal. Verification Block io:            NlA
         'WEiDGE:INFORMATtaN                 OlibleType:                         Integral      ' Cal Vlrlflcatlon Reflector:'           NIA Manufacturer:                   GEIT        Cable Lenglh:                       5 Meter8        Cai Verification UT 'Readlng:          NlA Part NumbGl':              360-162-072      Adaptor Box:                    OmIiI-A-ADP03       ClilVertftcaUon Gain Level:,           N/A Mode:                       Longitudinal    Cable Adapter Model:                   N/A          Final Cal; Dateinme:            0511611211031 Nom. Angle:                      42*        Il'Itermedlate Connectorsl              0           Couplant Type:                     Ullragelll MeaaurodAngle:                   42"        tJ ChannelslnoperaUve                 0/0           CouplantBatch NUmbGr:                09320 Nominal ExitPolnl:            ..0.747"               WBOOE'INFORMATlON,(COlit,)                 ElClim Start:                         1024 Measured'Exlt Point:            *0.7"       Exit point to wedge back:             0.7"         'ExemEnd:                              1031 Wedge Contour:              5;000"            Note: Tha 70* Angle Is peak'amplltuda for tite,O.19&~SDH, the hlgheatangla that can dlraclly Impinge on 0.198" SDHls 67*. Gain Level 18 set ualng.'he 70* angle as rsqulred by procedure.
Wedge Orientation:                Clre Notes: See essential Variables UT Oallbratlon* Data Sheets for addlllonal cailbratlon Informallon.
High Range Angla         Mid Range Angle        Low Range Angle               Functlon'Check,and Report File Name (70** 86&deg;)               126*~GO*)             JO** 26*)
Anala                     70' (67")                   40*                    O*            Pre W IWedgel           072*PRE*W ReDactor Depth          0.198" SOH                0.598" SOH             598'" SOH         Pro   wot   Wedge:      072*PRE*WO UT Readlna (MP)         0.910' ( .83")                o.e*                 0.605"           Post W I Wedge:        072*PST-W Amplituda                 8O%FSH                   8O%FSH                80%FSH            Post wal Wedge:         072*PST*WO Gain Level                 33;8 dB                  24.9 dB               28.3 dB           NlA Examiner: Troy A. Steinbauer                          Leval: III         Reviewer: Dan L8ngen~                                 Level: III Signature: ~             -----=-                      Date: OSn 5/12     Signaturel,/)~                 IN/. ~A. L . ...       Date: 05115/12 Utility Rfilew:
D~J ANIIRevlew:                       ",
Signature:                                            Date: 5121/),1.. Signature:      T.h                 A~n:              oal~I!}.4-L~
                                                                                                    '1                   Page    5 ' of
* 21

Attachment 2, Request RR-A37 Page 6 of21 A                          PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                       (ESSENTIAL VARIABLES, Customer: First Energy                Proceduro:' 64-90778641 64-151*864               Report No.: FWD*SWOl Site: Davis Bosse, Unit 1             Rovlslon: 001 1003                               Calibration Sheot No.: CDS*02 (Page 2 of 3)
Outage! tRt7                          SDCN: N/A                                        Component 10: RC*40*PCA-t8"3*FW!l Overlay Focal Law: 72-1.t26LAW Major Menu Item                 Monultem                         Sub*Menu Itom                              Setting Reading                    Rosult                             Selector                                    1 Reading                    Resull                              Flekl1                                    A%
Reading                    Rasull                              Field 2                                   A" Reading                    Result                              Field 3                                  SA" Readlno                    Result                              Field 4                                  PAlo ur                      Pulser                              Pulse,                        Imported from .lAW Nil ur                      Pulser                           TxlRxmode                        Imported from .lAW ftle UT                      Beam                              GalnoflBet                      Imparted from .lAW filii UT                      Beam                                Angle                         ImP,Orted 110m .lAW fde ur                      Beam                             8eamDeIay                        Importedfrom.lAW nre ur                    AdVanQed                           dB reference                                *0';
ur                    Advanced                            Points QIy                         (scale FIiCIol') 6 ur                    Advanced                            Sum Gain                        l,"por1~rrom ..I:AW ~Ie OIspI"y                  Selection                           DISplay                                Aos,ICI*
Display                  8eIecIIon                          C-Scan 1                                    Off Display                  SeteciJon                            Group                                 Currant Dlajltay                 SekicIIon'                         PrOjection                                 '0" Dlaplay                   Ru1er8                             UTUnll                               TrueDeplh Dlaplay                   Rulers                             % Ruler                               L/ilelir'('III)
DlaplllY                  Rulelil                           DAclTGC                                     oir Display                   Ruiara                               Gate                                     Oil Display                   Rulers                             c~rr8or                                    Off Dlaplay                   Color                               Select                               Ainplitllde DIsplay                   Color                              Slart%                                     0.0 DIsplay                   Color                              EiId%                                      100 Display                 Prop""es                             Display                                A*Scan Display                  PRlpartial                           Source                                 Normal ProbelPart                   Select                              Select                             S,!lect 'tXlRx PRlbelParl                   Selecl                           AuloDelaci                                   Off PRlbeJPa"                   Position                          $canOlfset                                    0 Examiner: Troy A. Steinbauer                Level: III            _ _:        OanUmgenf~                              Level:. III
                                                                                ~~ ~
Signature:~, ~~
Utility Review:
                          ~.mll"'>>1 Date: 05/16/12 5P,"/1t-Signature:
ANU Review:
Date: 06/15112
                                                                                                                                  ,,12.4-",..
Sinnalure:                   CWtl- ~        Date:                 Signature:    --"h~       \I
                                                                                                 ... ~                Date:
Page         6        of  21

Attachment 2. Request RR-A37 Page 7 of 21 A                           PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                            (ESSENTIAL VARIASLES, Cuatqmer: First Energy                  Procedure: 64*9077864 154*ISI*864                      Report No.: FW9*SWOL Slle: Davis Besse. Unit 1               Revision: 001 I 003                                    Calibration Sheet No.: C08*02 (Page 3 of 3)
Outage: 1R17                            SOeN: N/A                                              ComponenllO: RC*40*CCA*18-3*FW9 Overlay Focal Law: 72*1.125LAW Major Menu lIem                      Menu Item                         Sub-Menu Item                                  SeHlng Probe/Part                           POSition                         IndexOHsel                                       0:
Probe/Part                             P,arts                           Geomelly                                    Plllie Probe/Part                             Parts                           Tlilckness                                  10.000 POMProbe                        Conllgurallon                          Scan Type                                  Sedorial PGMProbe                        Configuration                        Connection P:                                     1 PGMPlObe                               Laws                          AlitoP'rogram                                   Olf Gate/Alarm                              Gele                            Gate Select                                 GaleA Gate/Alarm                              Gale                         Gale A Synchro                                 Pulse ur                                General                               Gain                            See CalibraUon Silael U1                                General                               SI8II:                                  o.Qj)Cj U1                               'General                              Range                            See Calibration Sheet ur                               'Oeneral                        'Wedge Delay                       See CilibiaUon'8h~1 (~!iIy) ur                                Ganeral                             VeiocIIy                     Imported froll) .i.AWrde (.2272) ur                                 Pulser                               FiIiq                                       2 UT                                 Pulser                             VOltage                                    High ur                                 Pulser                                PW                           liilporled froni ,lAW fite ur                                 PUiser                               PRF                                    OpUnIum U1                               Receiver                               Filler,                                  None ur                               Receiver                             ~I!dlfier                                   Fw ur               --
Recelvei                           Video FBI"                                     0If ut                               Receive,                           Averaging'                                      1 ur                               Receiver                              Reilid                                       0 U1                                 lleam                           'Sj:anolfaei                       Imported from .LAW file ur                                 Beam                            Ifidex'Offsel'                     Imported ftom ,lAW tlli ur                                 lIeam                               Skew                           ImllOl1ed rrom .lAW file Examiner: Troy A. SteInbauer                       Level: III          Reviewer: Dan Langenfeld                  LU            L.~vel:   II!
                                                                                      ~4#I /~r-Signature:'&#xa3;:;?~
Utility Review:      J).~
                                ---= ::;:::::;-
C\ir;L J Date: 05/16112 Date: 5tz.11iL Signature:
ANI! Review:
r.~                A.\:U:
Date: 05/16/12
                                                                                                                                 , S~b~,,,.
Dite:         .
Signature:
Signature:
Page          7     ()f  21

Attachment 2, Request RR-A37 Page 80f21 A                               PHASED ARRAY UT CALIBRATION DATA SHEET AREVA Customer: Fltst Energy                     Procedure: 54-9077864 I 64-ISI-864                    Report No.: FW9-SWOL Slto: Davis Besse, Unll1                    Rovlslon: 0011 003                                   Calibration Sheot No.: CDS-03 (Page 1 of 3)
Outage: 1Rt7                               SDCN: NlA                                             ComponentlD: RC-40-CCA*18*3-FW9 Overlay Focal Law: 73-1.5.LAW INSTRUMENT INFORMATION                       SEARCH UNIT INFORMATION                                  CALIBRATION INFORMATION Manufacturer:                   Zelec      Manufacturer:                               GEIT      Cal. Block ID:                       6039022 Model:                    OmniScanMX       Model:                                  115-000-485   Cal. Block MaterIal:                  316SS Serial Number:              OMNI-1635      Serial Number:                            01PSN9      Cal. Block Reflector:              Seegelow Software Rev.                  I.4R3       Frequency:                                2.0 MHz     Cal. Reflector Size:                  0.090' Frequency:                    2.0 MHz      Configuration:                           Dual-SaS     Cal. Reflector Depth:               Sao Balow
.PRF:                         Optimum       Number of Elamint8:                          32       Cal. UT Reading:                   See* Balow Reject:                          0%        Element Arrangement:*                      ht6        Cal. Gain Levtl:                   See Below Angle8 Geniratedi        0&deg;_ 85&deg; W IhC.)   Element Shape:                          Rectangular   Cal. Block Temp.:                       74&deg; SatupFlIe:                    073-1;6      Tral18dllcer Size:                    1.76X4.00mm     Thermometer SorIa. No.:             VH-11842 Delay:                       0.2* ...seo   II Elements afCalln:                         32       Inlllal 001. Da~trJine:         5-'15*2012/1008 Range:                     2.908"@OO       #I Elementa at Cal Out:                      32       Cal. Verlllcation Block 10:             NIA weDae INFORMATION                  OableType:                                Intagral    Cal VerlfJcaUon Reflector:              NlA
*Manufacturer:                    GEIT      Cable Length:                             6 Maiers    Cal Verification ur Reading:            NlA Part Number:                360-152-073    Adaptor Box:                          Omnl-A*ADP03    Cal Verification Gain Level:            NlA Mode:                       LOngitudinal   Cable Adapter Model:                         NlA      Final Cal. DatalTlme:            05/.1511211019 Nom. Angle:                       63&deg;      IntermedIate Co",wctore:                      0       Couplant Type:                      Ullfagelll Measured Angle:                   63*      II ChannalslnoperaUve                       0/0       Couplant Bakl... NUm~rl               09326 Nominal ExIt Point:            *0,720*             WEDGE INFORMATION (Cont.,                     Exam Start:                            .1011 Measured exit Point:            -0.05-     Exit point to wedge backl                   o.e"      Exam End:                              1018 Wedge Oontourl.              6.000'                                                          N/A Wedge Orientation:                AxIal Notea!Sefj Es88nUal Variables UT CallbtliUon Data SheetS.for addlJlqnsl calibration Information.
Hlbh Range Angla        Mid Ranga AnIJ.le            Low Range Angle           Function Ch"ck and Report File Name 170&deg;-8&&deg;)             1260 .80.)                    10&deg;.2&&deg;)
Angle                          70*                  63"                           26"         Pre W'   Wedge:        073-PRE-W Reflactor Depth           0.10" SOH            U"SOH(l.O)                   1.2" SOH (1.0)    Pre WOI Wedge:         073-PRE*WO UT Reading (MP)               0.32"             1.99" (1.GO)                     1.45"        Post W I Wedge:        073-PST-W AmJ)lItude                 GO%FSH                80%FSH                       80%FSH          Post WOI Wedge:        073-PST*WO Gain Level                  50.0dS                32.2 dB                      21J.OdB        NfA Examiner: Troy A. Steinbauer                        Levell III                 Reviewer: Dan Langenfe~              /,J~        Level: III Signature:   ~       -.~                            Date: 05/16112             Slgnature:,iJt/4I          ~..f!#---             Date: 05116112 UtllltYR~:
f)~
ANIIRevlew:
Signature:                                          Date:
r-."/~:0(.rJ;tt. Signature:       ,-:~ A+m:                        Dat~/'l4     f\l.
U               Page    8 ' of
* 21

Attachment 2, Request RR-A37 Page 9 of 21 A                     PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                  (ESSENTIAL VARIABLES)
Customer: First Energy          Procedure: 54*9077864/54*151*864                 Report No.: FW9*SWOL Slle: Davia Besse, Unit I       Revision: 001/003                                Calibration Sheet No.: CD5*03 (Page 2 of 3)
Outage: 1R17                    SDCH:NJA                                         componontlD: RC-40*CCA*18*3*FW9 Overlay Focal Low: 73*1.5LAW Major Monu Item            Menu Item                       Sub*Mellu Item                              Settlno Reading                 Result                            8electoi                                    1 Reading                 Result                             Field 1                                  A%
Reading                 Result                             Field 2.                                 AA Reading                 Result                             Field 3                                 SA" Readlll9                Result                             Fleid"                                   PA" UT                   PUI",                              ~r                            Imported irom .lAW iii, UT                   pulse;                         TlIIRxmOde                        Imported from .lAW lile UT                   Beam                            GBlnoffse\                       Imported from .lAW liIe UT                   Beam                               Angle                         Importild fiDriI .lAW nlii UT                   Beam                           Beam Delay                        Imported from .lAW file Ut:                Advanced                         dB:rererence'                                Off UT                 Advanced                          Palnl8Qiy                            (Scale Factor) It UT                .AdVanced                           Sum Gain                         Imported rrom .LAW Ole DiSplay              S8lecu~                             QlsPI.QY*                               MHC)
Display              Sel8c:tlon                         C*Scan1                                    au D!jpJay              seteclton.                           ~IOuP                                  C;_t Display              8eI8cuon'                          PlO)i!cIIon                                On DJ8pJay                RiiJeri                           ",Unit                                TIU8Df!p1h O/Bplily              ,Rulers                           .w. Ruler*                             Unear (%)
DIajII8y               Ruleni                          Df\ClrGC                                    Off
             . Display                RUlers                              Gate                                    On DIsp!aV                Rulirs                             CurtiOi'                                  Off Display                ColOr                              se/eci                               AmplitUde Olaplay                Color                             s.Wrt.*                                   0:0 Display                Color                              t;nci%                                   100 Dlaplay              ptopenJea                           Display                                 Ml~
Dlaplay              Ptopertles                          ~I!f~                                   Normal Ptobe/Part                Select                             Select                              Sated TxIRx Probe/Part                Select                         AuIoDelect                                    oli Probe/Part               PosIUon                          Scan Offset                                   0 Examiner: Troy A. Steinbauer           Level: III           RevIewer: Dan Lang~                                 Level: III J44'J                         .
Slgnatu~
Utility Review:
Date: 05/15/12 Signature:
ANI! Review:
Date: 05115112 SIgnature:              ~              Date:   Slz,-I/,L. Signature:
T-~ A'-\'IT                      D~~I "141,").-
I    I Page        9      of    21

Attachment 2, Request RR-A37 Page 10 of21 A                        PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                          (ESSENTIAL VARIABLES)
Customer: First Energy              Procedure: 64*9077864 , 64*181*864                   Report No.:FW9*SWOl Site: Davis Basse. Unil l'          Revision: 001 r003                                   Calibration Sheet No.: CDS*03 (Page 3 of 3)
Outage: 1R17                        SDCN:NlA                                             Component 10: RC*40*CCA-18*3*fWg Overlay Focal Law: 73*1.5LAW Major Menu Item                Monullem                           Sub*Menu Item                                 8eHIno Probe/Part                  PosiUon                               IndexOlfsel                                    0 Probe/Part                    Parte                                 G80molly                                  Plate Probe/Part                    Parts                                 Thickness                                10.000 POMProbe                  ConliguraUon                             Scan Type                                Sectorial PGMProbe                  Configurallon                         Conneclion P:                                    1 PGMProbe                      Laws                               AU!Q Program                                   orr Gate/Alainl                    Gale                                GaleSelecl                                 GoieA Gate/Alarm                     Gale                              Gate A Synchro                                PUle UT                       General                                   Gain                           Sie CalibraUon Sheet UT                       General                                   Slart                                   0.000 UT                       General                                  Range                           See CaUbrallan Sheet General                              Wildga Delay                    Sali Cilnbratlon Shaat (Delay)
UT                       General                                  VeloCIty                   IMported floM .LAWn.. (.2272)
Vi'                       puIS8/'                                   Fleq                                      2 UT                        Pulser                                  VoItege                                   High Pulsar                                    PW                           linpOrted flom .lAW file UT                        Pillser                                   PRF                                  optlmum I,I.T                    Receiver                                  FUter                                   None ReceIVer                                 Reclifier                                 FW UT                       Recelv8t                               Video FUt8t                                  orr UT                       ReoeIver                               AV8I8IJ1ng                                    1 UT                       Recetver                                  R8ject                                     0 UT                        Baam                                 Scan 0If88\                       Imported flom ~LAW PIe ur                        BOlim                                'ndexOrr$et                       lniported from .LAW liIe UT                        Boam                                     Skew                          Imported flom .lAW liIo Examiner: Troy A. Slelnbauer              Level: III                Reviewer: Dan Langenfeld.                .All        LeVel: III Slgn8ture~~                      --:'Date: 05115/12                 Signature:     ~"" ;?fe,.,...-.                      Date: 06i15112 Utility Review:        b. M"~                                       ANti Review:
tMfL~~                                                    To ~.~"'t1:                                  S-ID.JV'i.
*Slgnature:                                Date:     t;,.1?1}1'l. Signature:'
                                                                                                 ,                 Page Date:

Attachment 2, Request RR-A37 Page 11 of21 A                              PHASED ARRAY UT CALIBRATION DATA SHEET AREVA Customer: First Energy                      Procedure: 54*9077664 154-ISI-664                 Report No.: FW9*SWOL Site: Davis Besse, Unit 1                   RevisIon: 0011 003                                 Calibration Sheet No.: CD8*04 (Page 1*of 3)
Outage: 1R17                                SDCN: NIA                                         Component ID: RC.40*CCA-18-3-FW9 Overlay Focal Law: 73-1.125.LAW INSTRUMENT INFORMATION                       SBARCH UNIT INFORMATION                              CALIBRATION INFORMATION Manufacturer:                  Zetac        Manufacturer:                        GEIT         Cal. Blook 10:                        6039022 Model:                    OmnlScanMX        Model;                           115*000-485       Cal. Block Material:                  31685 8arlal NlImber:            OMNI-1535        8erlal Number:                     01PBN9         Cal. Blook Refleotor:               See Below 80ftware Rev.                  1.4R3        Frequency:                         2.0 MHz         ~al. Reflector Size:                  0.090' Frequencv:                    2.0 MHz       <<:onflgiJratlon:                  DUElI-SeS        Cal. Reflector Depth:              SeltBelow PRF;                          Opllmum       Number of Elemente;                    32          Cal. UT ReadIng:                   Sell BIllow Reject:                           0%        Element Arrangement:                 2x16         Cal. Gain Level:                    See Below Ang/es*Generated:        0'* 85'    W Inc.) Element Shape:                   Rectangular      Cal. Block Temp.:                         7411 Se.upFlle:                   073*1.126      Transducer SIIII:              1.1h 4.00 mm       Thermomllter Serlal.No.:            VH-11842 Dalay:                         oi1Sec'      i Elements at Cal In:                  32         1"IUal Cal. DatelTlme:           6*15*2012/0947 Rang~:.                    2.908"@00        II EleMents at Cal Out:                32         Cili. VerlflcllUon BIC)Ck ID:            N/A WEDGE IN"OAMATION                 CltbleType:                         Integral       Cal Verification Reflector:             NfA Manufacturer:                     GEIT      Cable Length:                      6 MetalS       Cill Verification UT Readl!'g:           NlA Part Number:                380-162-073     Adaptor Box:                   Dmnl-A-ADP03       Cal VOrifloatlon GaIn -...v~I:           NlA Mode:                        longitudInal   Cable Adapter Model:                  NlA          Final Cal. DateITlme:            06l;611?11006 Nom.ARgla:                         53'      IntermedIate Conneotors:               *0         COMpla"t Typa:                       Urtraglllll Measured Angle:                    63'      " Ohannelslnoperatlve                 0/0         *COuplant Batch Number:                 09325 Nominal Elilt Point:            -0.720"             WEDGE INFORMATtQN (Cont.)                  Exam8tart:                             0954 M..aaured Exit PoInt:            .0.86"     EIIII point to wedge baok:            0.8"         EXam Ehd:                               1004 Wedge,Contour:                5.000'                                                       NlA Wedge Orientation:                Aldal Notes: See Essential Variabloa UTCalibratlon Dala Sheeta/or addlllQnll1 Cl8libratlon Information.
HIgh Range Angle       MId Range Angle        Lo\Y*Rar\ge Angle            Famctlon*Cheok alUl Rtp~rt File Name
                            '70'- 86')             (260
* 80')            (0"- 26')
Anale                          70'                   53'                                   Pre W I-Wedge:          073-PRt:*W Reflector Depth           0.10*SDH                1.0' SOH               10'SDH            PreWOI Wedge:           073-PRE*WO UT Reading (MPt               0.45"                 1.00"                 1.215"           PostW/Wedge:            073-PST-W Amplitude                  80%FSH                 80%FSH                BO%FSH             POst WOI Wedget         073*PST-WO Gain Level                   52.0 dB               30.3dS                23.6 dB           NIA E~amlner:   Hoy A. Stelnbausr                       Leval: III          RevIewer: Dan Langenfeld../            .... L//       Level: III SIgnature: ~ ~~ :::::--                           --Date: 05115/12      SIgnature:     JAIl         ,?~ r"'"'
Date: 05115112 Utility Review:      b,~,.-                                             ANIIRev/ew:
Signatura:                ~ k~                                          SIgnature:                                            Date:  s-Ic1+ I" Page   11      Jf      1

Attachment 2, Request RR-A37 Page 12 of 21 A                       PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                    (ESSENTIAL VARIABLES)
Customer: Firsl Energy             Procedure: 64-9077864' 54-181*864                 Report No.: FW9*SWOL Site: Davis Besse, Unit 1          Revision: 001 1003                                Calibration Shset No.: CDS-04 (Pags 2 of 3)
Outage: 1R17                       SDeN: N/A                                         Component 10: RC-40*CCA*18*3*FW9 Overlay Focal Law: 73*1.126LAW Major Manu Item               Menu Item                        Sub*Menu Item                               Setting ReadIng                    Resull                             Selector                                    1 Reading                    Resull                              Field 1                                  A%
Readlno                    Result                              Field 2                                   AA Reading                    Re$ult                              Field 3                                  SAA Reading                    R8$ult                              Fleld;j                                  PAA UT                       Pulser                              Pulser                        iMportlid from .LAW fife UT                       Pulser                          TxlRxmoda                         Imporied from .LAW fde UT                        Beam                            Gain offael                      Imported from .LAW file UT                        Beam                               Angle                         Imported from .LAW (de UT                        Beam                           Beam Delay                        Imported from .LAW fila UT                     Advanced                          dB reterence                                 Off UT                     AllvanCBd                           PofntaQly                          (Scala FacIof) f UT                    MvlinCC!d                            SUm Gilln                       Imported from .LAW lila
             .Display*                 se~Uon                               Display                                A~S*(C)
Display-                 6elealfon                           C*8canl                                    on Display                  Sell!Clion                            Group                                 Current Display                  SalacUon                            PIOjaciU6n                                 On Display                    Rut!)ra,                           ",TUnlt                              TlI,IsDeplll DlsjlIiIy                  Rulars:                            % Rul81                              LInear (%)
Display                    Rulers:                           DAClrGC                                    orr Dlaplay,                   Rul81i:                              Gale                                    On DlaplllY                   Rlliera                             Cursor                                   olf Display                     COlor                              Select                              'Amplitude DIsplay                     CC!1or                            Slert%                                    0.0 PlsPlay                     Color                              End %                                    100 Clsplay                 Properties                            DIsplay                                A*Scan Display                 Properties                            SOurce                                  Normal Probe/Part                   Select                              Select                             Select TxlRlI ProblllParl                  Select                          AUla Delect                                  on PlOblllParl                 POsition                          scanOrJs&1                                    0 Examiner: Troy A. Slttlnbauer             Level: III           Reviewer: Dan Langonfeld.                 L/)        Level: III
                                                                              ~tI41 ~r" Utility Review:  --t).~~
Slgnatur8:~----: ---~                     Date: 05/16112 Date: 5)z1J~
Signature:
ANII Review:
SIgnature: ,,~
Date: 06/15/12 slMIIA Signature:
                              .                                                          ,-        At.\lt           Date:
Page        12     of   21

Attachment 2, Request RR-A37 Page 13 of 21 A                     PHASED ARRAY UT CALIBRATION DATA SHEET AREVA                                                 (ESSENTIAL VARIABLES)
Custom~r:    First Energy       Procedure: 54*9077864 I 54*151-864               Report No.: FW9,5WOL Silol Davis Besse. Unit 1       Rovlslon: 0011 003                               Calibration Shoet No.: CDS*OII (Pogo 3 of 3)
Outage: lR17                    SDCN: N/A                                        Component ID: RC-40-CCA-18-3-FWO Overlay Focal Law: 73*1.6LAW Major Menu Item            Manu Item                       Sub*Mimu lIem                                 SilHlng ProbaiPart               PoslUOn                          lildexO"ael                                     o ProbaiPart                 Parl&                            Geometry                                   Plilla PlobaiPart                 Parta                            ThIckI\e8s                                lC).OOO PGMProba               ConliguraUOn                        ScanTypa                                  Se~rlal POMProba               ConnguraUon PGMProba                  Laws                           AlitoPR1IIrem                                  0" Gate I Alarm                Oalo                           Gate SeleCt                                 08teA Oala/Alarm                  Gale                         ~a~ A 5yncllro UT                   General                               Gain                          See CallbraUon Sheat ur                   General ur                   Goneral                                                             See Calibration Sheel ur                   General                                                         -80e CalibratlonS,,"1 (DelaY) ur                   Genaral                             Velocity                   Imj)Or1ed 'rom 1AW file (.2272) ur                    Pulser                               Freq ur                    Pidser                             VoIhi(Ja ur                    Pulier                               PW                           ImpOrted from ~lAW'~
UT                    Pulaer                               PRF                                  Optimum UT                   Receiver                             .FOter ur                   ReceIver                            RecIlfter UT                   R8cetver                         VlifeoFl1ier ur                   Receiver ur                   Receiver                                                                         o ur              --
Beam ur                    808m                            In~8ii 0"8el                      ImlJOlted 'rom .lAW filii ur                    Beam                                Skew                          Imported'ftcin,,-.lAWfila examiner: Troy A. Steinbauer           Level: III           Reviewer: Dan Langenfeld                              Livel: III f1A~~        -/ -         ,Lat),
Signature:   ~ --..,r Date: 05/16112       Signature: If;'~f ii(~7"~--. Dat&:- 05115112 Utility Review:                                             ANn Review:
Sianature:                             Date:   slat/",. Signature:      T..&#xa3;.      .ft... At..nT             Date:     s/~:t.
Page         1~     of   21

Attachment 2, Request RR-A37 Page 14 of 21 RepOrt Number:    FW9-SWOL AREVA A                        PHASED ARRAY WELD OVERLAY EXAMINAnON DATA SHEET                            ~i~on Data Sheet Number: EOS-01 ApJ)1i~ble calibration Sheet Numbers: Cos.o1 through CDS-04 Customer lmonnation                                                                  Component Information Utility: First Energy                      Plant Davis Besse           IUnit: 1 CompO~nt     rD:
RC-40-CCA-18-3-F'tN9 Overlay Original Pipe Weld 10: NlA Outage: 1R17                                                                           Examination Surface: 00                  Surface Condition: Ground Smooth Procedure Information                                   Original Weld Nom. Diameter: 3.4"        Original Weld Thickness: See Note-1 Procedure:. 54-9077864. Rev. 001/54-1S~                                                Weld.~ Diameter: 4.5"                    Weld Overlay Thiclcness: 0.53" - 0.89"

==Title:==
Procedure for Manual Phased Array UItrasoi1ic &arnination Of Weld Overlaid Sinillar and Dissimilar Metal Welds (S+e077864, Rev. 0(1)
Overlay Type: Non-Standard               Weld Overlay Materi",l: AUoy 52M Manual Phased Array Ultrasonic ~nation ofW~d Overlaid Sirni18r and        DiSsimilar Metal Welds (S4.Is1-864-003)
Examination Information Examination Start Data: 0511.5112          Examination Start Tune: 0947                Component Temperature: 73&deg;F              Thermometer Serial Number: VH-11842 Examination End Date:        05115112      Examination End Time:       1045            Couplant Type: Ultragel 1\               Couplant Batch Number: 09325 Exam Examination       Focal Search Unit           Wedp                                          Scan Direction     Se~            Recordable Indications          Umitations                Notes:
Angles         La'!'                                (ds) 01PBNS          360-152-072         O~ "SOO      72-1.1.25   !6! LKUS b!LKDS            30.9                 No                      See Note                  1
                                                                ~ LKCW 181 LKCCW Q1PBNS         ~152-O72             0&deg;-80"                   !::! LKUS yLKDS            39.6                 No                      See Note                  1 72-1.5     mI.LKCW    a:a LKCCW 01PBN9         360-152-073          0" -85"      1301.125    ~~~                        36.3                 No                      See Note                  1 01PBN9         360-152-073          O* - 85"      73-1.5     ~~~~ccw                    38.2                 No                      See Note                  1 Comments:                                                                              Notes:
* Sensitivity adjusted during examination to maintain average baseline              1. See coverage data sheets for*1he examination coverage obtained. Umitation noise level between 5% and 20% FSH for the     eo  degree beam angIe.                 due to compon~nt and FSWOL configuration.
&aminer: Troy A. Steinbauer                                          Level: JII Revfenr. Dan~               ~                             Level: III S'~gnatu*
       .     ~~
             .                         ~
Date: 0SI15112    Signature: . ~~ ~.                                          Date: 05/15112 Utility Review:            D. m~                                                       AND *Review:
Date:
                                 ~~
Date:
Signature:
sft.""  fZ.
Signature:    ~Ji.~At4tt                                             s):t4h,,-
II Page      14  of   21

Attachment 2, Request RR-A37 Page 15 of21 A
AREVA OMNISCAN 32/128 ULTRASONIC PHASED ARRAY INSTRUMENT CHANNEL FUNCTIONAL VERIFICATION IMAGES Customer: First Energy Site: Davis Besse Unit 1    Outage: 1R17         Report Number: FW9-SWOL Channel Functional Verification System: 064-02 (RCS)   Component: RC-40-CCA-18-3-FW9 Overlay Sheet No.: CFV-01 CHANNEL FUNCTIONAL VERIFICATION IMAGES Transducor Serial Number: 01PBN8 Pre With Wedge rl\1'""'r--~----r--r---------.-.-.-----~ ~!!~ ab: A:OQ.O 6K:090 L:001 Post With Wedge i
                                                                           . It, '" 'I.' ~. !', ~ I ~.'  '1',  ;' .' !.  ,! ", I Date: 05/16/12                                                            Date: 05115112 Page           15    of  21

Attachment 2, Request RR-A37 Page 16 of 21 A                           OMNISCAN 321128 ULTRASONIC PHASED ARRAY INSTRUMENT CHANNEL FUNCTIONAL VERIFICATION IMAGES AREVA Customer: First Energy      Site: Davis Besse Unit 1    Outage: 1R17          Report Number: FW9-SWOL Channel Functional Verification System: 064-02 (RCS)        Component: RC-40-CCA-18-3-FW9 Overlay Sheet No.: CFV-02 CHANNEL FUNCTIONAL VERIFICATION IMAGES Transducer Serial Number: 01 PBN8 Pre Without Wedge Post Without Wedge Prepared By: Troy A. Steinbauer Date: 05/15/12                                           Date: 05115112 Page    16    of 21

Attachment 2, Request RR-A37 Page 170f21 A                       OMNISCAN 32/128 ULTRASONIC PHASED ARRAY INSTRUMENT CHANNEL FUNCTIONAL VERIFICATION IMAGES AREVA Customer: First Energy Site: Davis Besse Unit 1    Outage: 1R17          Report Number: FW9-SWOl Channel Functional Verification System: 064"()2 (RCS)  Component:    RC-40-CCA-1~-3-FW9    Overlay Sheet No.: CFV-03 CHANNEL FUNCTIONAL VERIFICATION IMAGES Transducer Serial Number: 01 PBN9 Pre With Wedge Post With Wedge Date: 05/15/12                                           Date: 05/15/12 21

Attachment 2, Request RR-A37 Page 18of21 A                      OMNISCAN 32/128 ULTRASONIC PHASED ARRAY INSTRUMENT CHANNEL FUNCTIONAL VERIFICATION IMAGES AREVA Customer: First Energy Site: Davis Besse Unll1     Outage: 1R17          Report Number: FW9*SWOL
                                                          --~---~~--~--~~~=-~----~
Channel Functional Verification System: 064-02 (RCS)   Component: RC-40-CCA-18-3-FW9 Overlay Sheet No.: CFV-04 CHANNEL FUNCTIONAL VERIFICATION IMAGES Transducer Ssrlal Number: 01 PBN9 Pre Without Wedge Post Without Wedge Date: 05/15/12                                           Date: 05/15112 Page     18   of 21

Attachment 2, Request RR-A37 Page 19 of21 Report No.:                 FW9-SWOL A                  UT Coverage Work Sheet                                 Component 10:                   RC-40-CCA-18-3-FW9 Overlay AREVA                                                                               Sheet No.:                 COV-01 Customer:     First Energy                     Site I Unit:         Davis Besse 11                                         Outage:      1R17 1-2 RCS COLD LEG DRAIN NOZZLE RC40-CCA-18-3-FW9 OVERLAY AXIAL COVERAGE US-TOTAL
                                              .......                                       0.83- 100,.
0.114 -501(,
(.64 x .5) + .81 a 1.15/1.55 ~ .74 74%
ElCTRAOOSE .. 74,.
INTRADOSE a 80%
OC!de9.aG~
270 deg.... Jill Ald.1 Compolile'; ~
1.&1-TOTAL 0.60*~
0.68-100W0 II. .11).* .88" .88"11.81 "
eo'16
:        . . .-         1,M*nnAL 0i7:H~
0.10 -1iOl4
(;10'" ,&) *.*711" t.07*' U4;, ,6it4 1IQ!6-10.* GO"
                  ,..      ~
1.lI7TOTAl 0.16- 100,.
0.19-50" lo1i!it.lli t .14" I, iO~/I.o; ~ .135 13" 210de(/.
Form Edition: Nov 20111 Rev 0                                                                                                   Page:      19  of 21

Attachment 2, Request RR-A37 Page 200f21 Report No.:           FW9-SWOL A                  UT Coverage Work Sheet                         Component ID:            RC-40-CCA-18-3-FW9 Overlay AREVA                                                                     Sheet No.:           COV-02 Customer:     First Energy                              Site I Unit: Davis Besse 11                 Outage:   1R17 1-2 ReS COLD LEG DRAIN NOZZLE RC*40*CCA*18-3*FWD OVERLAY eiRe. COVERAGE US* TOTAL 1.18*100""
1.1811.5S-.781 78" p
IlXTRAOOSE a 76.
INTRADOSe - 70.
270daQ.-n..
Clio. Compoll .... 71 ..
I.GI*TOTAL 1.14*100" 1.1411.81 D  '''''
70" U4.TOTAL 1.08* '0Ml 1.081 U4 D.68 66" 1.!i7TOTAL 1.16*1~
                  ~--~_1lT 1.1611.67* .73 7;'~
2l0dag.                                          -+__,,_
Form Edition: Nov 2011 , Rev 0                                                                            Page:   20  of   21

Attachment 2, Request RR-A37 Paae 21 of21 Report No.: FW9-SWOL A                 UT Coverage. Work Sheet           Component ID:   RC-40-CCA-18-3~FW9    Overlay AREVA                                                        Sheet No.: COV-03 Customer:     FIrst Energy        Site I Unit: DavIs Besse 11                 Outage:     1R17 .
SCAN VOLUME                               % COVERAGE AXIAL SCAN COVERAGE EXTRADOSE RE(310N                                   74%
INTRADOSE REGION                                    60%
90 DEGREE REGION                                    69%
270 DEGREE REGION                                   73%
AXIAL COMPOSITE COVERAGE = 89%
CIRC SCAN COVERAGE EXTRADOSE REGION                                    76%
INTRADOSE REGION                                    70%
90 DEGREE REGION                                    68%
270 DEGREE REGION                                   73%
CIRCUMFERENTIAL *COMPOSITE cOVERAGE == 71%
COMBINED COVERAGE AXIAL COMPOSITE..COVERAGE = 69%
CIRCUMFERENTIAL COMPOSITE COVERAGE =:71'%
Total OOY8tage..Qbtained.: 70%       --  .-
Form EdItion: Nov 2011 I Rev 0                                                     Page:    21   :0'   21

Davis-Besse Nuclear Power Station 10 CFR 50.55a Request RR-B1 Page 1 of6 Proposed Alternative in Accordance with 10 CFR 50.55a(a)(3)(i)
               --Alternative Provides Acceptable Level of Quality and Safety--
: 1. American Society of Mechanical Engineers (ASME) Code Components Affected Components:                       Various piping welds presented in Tables 1 and 2 Code Class:                       Class 2                                      .
Examination Categories:           C-F-1 and C-F-2 Item Numbers:                     C5.11, C5.21 , C5.51, and C5.61

===2. Applicable Code Edition and Addenda===
American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," 2007 Edition through 2008 Addenda.

===3. Applicable Code Requirement===
Table IWC-2500-1, Examination Category C-F-1, Item C5.11 requires surface and volumetric examinations for piping welds greater than or equal to 3/8 inch nominal wall thickness for pipe sizes greater than nominal pipe size (NPS) 4 inch.
Table IWC-2500-1, Examination Category C-F-1, Item C5.21 requires surface and volumetric examinations for piping welds greater than 1/5 inch nominal wall thickness for pipe sizes greater than or equal to NPS 2 inch and less than or equal to NPS 4 inch.
Per Note 1 of Examination Category C-F-1, requirements for examination of welds in piping less than or equal to NPS 4 apply to high pressure safety injection and auxiliary feedwater systems in accordance with the exemption criteria of IWC-1220.
Per Note 2 of Examination Category C-F-1, welds selected for examination shall include 7.5 percent, but not less than 28 welds, of all dissimilar metal, austenitic stainless steel or high alloy welds not exempted by IWC-1220. (Some welds do not meet the IWC-1220 exemption criteria. However, these welds are not required to be nondestructively examined per Examination Category C-F-1. These welds shall be included in the total weld count to which the 7.5 percent sampling rate is applied.)
Table IWC-2500-1, Examination Category C-F-2, Item C5.51 requires surface and volumetric examinations for piping welds greater than or equal to 3/8 inch nominal wall thickness for pipe sizes greater than NPS 4 inch.
Table IWC-2500-1, Examination Category C-F-2, Item C5.61 requires surface and volumetric examinations for piping welds greater than 1/5 inch nominal wall thickness for pipe sizes greater than or equal to NPS 2 inch and less than or equal to NPS 4 inch.
Per Note 1 of Examination Category C-F-2, requirements for examination of welds in piping less than or equal to NPS 4 apply to high pressure safety injection and auxiliary feedwater systems in accordance with the exemption criteria of IWC-1220.

Request RR-B1 Page 20f6 Per Note 2 of Examination Category C-F-2, welds selected for examination shall include 7.5 percent, but not less than 28 welds, of all carbon and low alloy steel welds not exempted by IWC-1220. (Some welds do not meet the IWC-1220 exemption criteria.
However, these welds are not required to be nondestructively examined per Examination Category C-F-2. These welds shall be included in the total weld count to which the 7.5 percent sampling rate is applied.)

===4. Reason for Request===
The piping in the containment spray discharge, the decay heat discharge, the decay heat suction from the reactor coolant system Class 1 boundary, and the main steam supply for the auxiliary feedwater pumps from the main steam lines to the first isolation valve have wall thicknesses less than 3/8 inch and greater than 1/5 inch. The piping in the containment spray suction, the high pressure injection suction, the high pressure injection recirculation line, the decay heat suction from the borated water storage tank, and the decay heat suction from the emergency sump all have wall thicknesses less than 1/5 inch. In accordance with Examination Categories C-F-1 and C-F-2, this piping does not require any nondestructive examination.
When the selection criteria of Table IWC-2500-1, Examination Categories C-F-1 and C-F-2, Note 2, is applied to these systems, approximately 93 percent of the decay heat discharge welds past the containment isolation valves, approximately 26 percent of the high pressure injection discharge, and approximately 11 percent of the main steam system welds receive a nondestructive examination per Examination Categories C-F-1 and C-F-2. These sampling rates exceed the 7.5 percent sampling rate established in ASME Section XI. When the same selection criteria is applied to the emergency core cooling systems (ECCS), the ECCS welds requiring examination total approximately 1/3 of the entire nonexempt weld population for all these systems. This is due to the large number of nonexempt ECCS welds that do not meet the Examination Categories C-F-1 and C-F-2 minimum thickness requirements, and therefore can not be selected for examination. This disproportionate distribution does not align with Note 2(a) of Examination Categories C-F-1 and C-F-2, which requires examinations to be distributed among Class 2 systems prorated, to the degree practicable, on the number of nonexempt welds in each system.
Volumetric examinations are not appropriate for all piping wall thicknesses. An example of this acknowledgement is contained in Code Case N-435-1. This Code Case, which was incorporated into the 1995 Addenda, provided an alternative ASME Section XI examination requirement. This Code Case stated that for welds in vessels with a nominal wall thickness less than or equal to 1/5 inch, surface examination may be applied in lieu of volumetric examination. With its approval, ASME acknowledged the impracticality of examining welds with a wall thickness of 1/5 inch or less to the ASME Section XI volumetric examination requirements.
: 5. Proposed Alternative and Basis for Use Proposed Alternative:
The minimum nominal wall thickness specified in Examination Categories C-F-1 and C-F-2 will not be used to exclude welds from examination in the containment spray, decay heat, high pressure injection, or main steam systems. Instead, the following requirements will be used to establish examination requirements for Examination Category C-F-1 or C-F-2 welds in these systems.

Request RR-B1 Page 30f6 A 7.5 percent sampling rate will be applied to all welds not exempted by IWC-1220 using the following selection criteria.
* Selected welds that meet the nominal wall thickness requirements of Examination Categories C-F-1 and C-F-2 will receive a surface and volumetric examination.
* Selected welds in piping greater than NPS 4 inch with wall thicknesses greater than 1/5 inch and less than 3/8 inch will receive an augmented surface and volumetric examination.
* Selected welds in piping with wall thicknesses less than or equal to 1/5 inch will receive an augmented surface examination.
Pipe sizes with wall thickness less than 3/8 inch (including the group with wall thickness less than 1/5 inch) range from NPS 6 inch to NPS 18 inch. The current numbers of welds are identified in this request's Tables 1 and 2 for Examination Categories C-F-1 and C-F-2, respectively.
Basis for Use:
Volumetric examinations are used to determine if unanticipated degradation of piping is occurring due to such phenomena as erosion, corrosion, or cracking. ASME Section XI only requires volumetric examination of those welds with a wall thickness greater than or equal to 3/8 inch for pipe sizes greater than NPS 4 inch and those welds in high pressure injection and auxiliary feedwater systems with greater than 1/5 inch nominal wall thickness for pipe sizes greater than or equal to NPS 2 inch and less than or equal to NPS 4 inch.
In lieu of the Code requirements, all welds in these systems, except those exempted by IWC-1220, will be included in the Code required 7.5 percent population. Those welds with a wall thickness greater than 1/5 inch are subjected to volumetric and surface examination, while those with a weld thickness less than or equal to 1/5 inch are subjected to a surface examination. Application of these criteria to the entire population will provide assurance of the integrity of these Class 2 systems for piping of all wall thicknesses.
The weld examinations will be scheduled per the requirements of Table IWC-2411-1.
This alternative will provide an acceptable level of quality and safety as the examinations will be performed throughout the entirety of these Class 2 systems, rather than on only a portion of those systems.
: 6. Duration of Proposed Alternative The proposed alternative shall be utilized during the fourth 10-year inservice inspection interval, which commenced on September 21, 2012.

Request RR-B1 Page 4 of6
: 7. Precedent The Nuclear Regulatory Commission (NRC) approved a similar alternative, submitted as Relief Request RR-B2, for the Davis-Besse Nuclear Power Station.
NRC letter to FirstEnergy Nuclear Operating Company, 

==Subject:==
Davis-Besse Nuclear Power Station, Unit 1, Requests for Relief for Third 10-Year Interval Inservice Inspection Program Plan TAC No. MB1607, September 30,2002 ..
[Accession No. ML022700279]
: 8. References
: 1. ASME Code Case N-435-1, Alternative Examination Requirements for Vessels With Wall Thickness 2 in. or Less," July 30,1986.

Request RR-B1 Page 50f6 TABLE 1: Category C-F-1 Pressure Retaining Welds in Austenitic Stainless Steel or High Alloy Piping(:.!)
Category    Item No.       System                  Descrtptlon            Exam Method     Number of        ExamInation             Frequenqo             Scheduled for Components In      Percentage(4)                                 Examlnatlon(4)
Item No.
C-F-1        C5.11         04~2        Piping WeldS :it 3/8 inch          Surface and         42                                                              4 Nominal WaD Thickness for           volumetric Piping> NPS 4 Circumferential Weld Item Number Total         42           7.5 percent      Each inspection interval          4 C-F-1       CS.11A         04~2        Piping Welds> 1/5 inch and         Surface and        283                                                             21 061-01      < 3/8 inch Nominal WaD              volumetric         88                                                              7 Thickness for Piping> NPS 4 Circumferential Weld Item Number Total        371           7.5 percent      Each inspection interval         28 C-F-1       C5.11B         04~2        Piping Welds s 115 Inch              Surface          122                                                              9 052-01      Nominal wall Thickness for                             32                                                              3 Piping> NPS 4 061-01      Circumferential Weld                                   12                                                              1 Otherl')                                                            11                                                              0 Item Number Total        1IT           7.5 percent      Each inspection interval         13 C-F-1        C5.21         052-01      Piping Welds> 1/5 inch             Surface and        301                                                             24 Nominal Wall Thickness for          volumetric Piping :it NPS 2 and s NPS 4 Circumferential Weld Item Number Total        301           7.5 percent      Each inspection interval         24 C-F-1       C5.21A         04~2        Piping Welds s 1/5 inch              Surface          21                                                               2 052-01      Nominal WaD Thickness for                             142                                                             11 Piping :it NPS 2 and s NPS 4 Circumferential Weld Item Number Total        163           7.5 percent      Each inspection interval         13
                                                                                               . 1054(3)
I Category Total                     7.5 percent     Each inspection interval         82 System Definitions: 049-42 .. Decay Heat and Low Pressure Injection (Includes Borated Wster Storege)
OS2"()1 .. High Pressure Injection 061-01" ContalnmentSprey Note 1:   These systems Included for weld count only. Welds are not required to be examined per examination Category C~-1 orthls request for altematlve.
Note 2:   This table does not Include C5.30 and CS.41 welds. A 7.5 percent sample of these welda will alBo receive a surface examination, as required by Examination Category C~-1.
Nota 3:   Total number of welda requiring examination for ExamInation Category c.F-1 and this request for alternative, excluding Items CS.30 and CS.41.
Note 4:   examinations are prorated, to the extent practicaJ, among code Item numbere and systems.

Request RR-B1 Page 60f6 TABLE 2: Category C-F-2 Pressure Retaining Welds in Carbon or Low Alloy Steel Piping(2)
Category   Item No.      System                  Descrtptlon           Exam Method      Number of         EumlnatIon             Frequency             Scheduled for Components In      Percentage(4)                                 Examlnatlon(4)
Item No.
C-F-2       C5.51        036-01       Piping Welds ;t 3/8 inch          Surface and         77                                                              6 050-03       Nominal wall Thickness for         volumetrtc         69                                                              6 Piping> NPS 4 083-01       Circumferential Weld                                  99                                                              7 Other                                                             4                                                               0 Item Number Total        249            7.5 percent     Each inspection interval         19 C-F-2. C5.51A        083-01       Piping Welds> 1/5 inch and       Surface and          80                                                             10 Other")       < 318 inch Nominal Wall           Volumetric          42                                                              0 Thickness for Piping> NPS 4 Circumferential Weld Item Number Total        122            7.5 percent     Each inspection interval         10 C-F-2       CS.61        050"()3      Piping Welds> 1/5 inch           Surface and         49                                                               4 Nominal Wall Thickness for        Volumetric Piping ;t NPS 2 and s NPS 4 Circumferential Weld Item Number Total        49            7.5 percent      Each inspection interval          4 420(3)
I    category Total                         7.5 percent      Each inspection interval         33 System Definitions: 036-01" MaIn Feedwater 050-03 = Auxiliary Feedwater 083"()1 .. Main Steam Note 1:  These systems Included for weld count only. Welds are not required to be examined per Examination category C-F-2 or this request for alternative.
Note 2:  This table does not Include C5.70 and CS.81 welds. A 7.5 percent sample of these welds will also receive a surface examination, as required by examination Category C-F-2.
Note 3:  Total number of welds requlrtng examination for EumlnatIon Category C-F-2 and thIs request for alternative, excluding Items CS.70 and CS.81.
Nota 4:  examinations are prorated, to the extent practical, among code Item numbers and systems.

Davis-Besse Nuclear Power Station 10 CFR 50.55a Request RR-A36 Page 1 of 12 Notification of Impracticality in Accordance with 10 CFR 50.55a(g)(5)(iii)
                             --Inservice Inspection Impracticality--
: 1. American Society of Mechanical Engineers (ASMEl Code Components Affected ASME Class 1 welds in the Reactor Pressure Vessel (Figure 1 depicts locations):
Reactor Vessel Lower Shell to Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-34)
Reactor Vessel Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-35)
ASME Class 1 components in the Reactor Pressure Vessel (Figure 1 depicts locations):
Core Flood Nozzle Inner Radius Sections (Component Number RC-RPV-WR-54/55-W-IR)
(Component Number RC-RPV-WR-54/55-Y-IR)

===2. Applicable Code Edition and Addenda===
American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," 1995 Edition through 1996 Addenda.

===3. Applicable Code Requirement===
Table IWB-2500-1, Examination Category B-A, Item B1.11 requires a volumetric examination of essentially 100 percent of the shell weld length, as defined by Figure IWB-2500-1. Code Case N-460 states that a reduction in*examination coverage on any Class 1 or Class 2 weld may be accepted provided the reduction in coverage for that weld is less than 10 percent.
Table IWB-2500-1, Examination Category B-A, Item B1.21 for reactor vessel circumferential head welds, requires a volumetric examination of essentially 100 percent of the weld length, as defined by Figure IWB-2500-3. Code Case N-460 states that a reduction in examination coverage on any Class 1 or Class 2 weld may be accepted provided the reduction in coverage for that weld is less than 10 percent.
Table IWB-2500-1, Examination Category B-O, Item B3.100 for reactor vessel nozzle inside radius sections, requires a volumetric examination of essentially 100 percent of the area of Interest, as defined by Figure IWB-2500-7. As an approved alternative to the Item B3.100 requirements, Code Case N-648-1, with conditions defined in Regulatory Guide 1.147, allows a visual examination with enhanced magnification of the external surfaces of the examination volume to be performed in lieu of the volumetric examination requirements. Code Case N-460 states that a reduction in examination coverage on any Class 1 or Class 2 weld may be accepted provided the reduction in coverage for that weld is less than 10 percent.

Request RR-A36 Page 2 of 12
: 4. Impracticality of Compliance Examining essentially 100 percent of the weld volume or areas of interest for the affected components, as required by the ASME Code, is impractical. Examination limitations exist due to reactor pressure vessel (RPV) internal obstructions inherent to the Babcock & Wilcox reactor design. A discussion on the examination details is provided below. Specific examination interferences and actual examination capabilities are discussed for each of the affected components in Section 6.
Examination Details:
The RPV welds are examined from the inside surface of the RPV using the AREVA Trans-World System (TWS) inspection manipulator in conjunction with the AREVA ACCUSONEX data acquisition and analysis system. TWS is a computer controlled, remotely operated manipulator that uses a contact ultrasonic (UT) head to obtain ultrasonic data for the detection and sizing of indications. The contact head is fitted with an array of transducers in direct contact with the RPV surface. With the ACCUSONEX data acquisition system, multiple channels of ultrasonic data are amplified, filtered, digitized, and processed, and then integrated with the transducer position to provide computer generated images of the examination volume. The RPV welds have been examined with techniques which have been demonstrated and qualified in accordance with Supplements 4 and 6 of ASME Section XI, 1995 Edition through 1996 Addenda, Appendix VIII, using the Electric Power Research'***      i .
Institute (EPRI) performance demonstration initiative (POI) protocol.
: 5. Burden Caused by Compliance The bottom of the RPV was designed and fabricated such that core guide lugs and incore instrument nozzles obstruct portions of the RPV's lower circumferential welds, causing a limitation in scanning coverage for the welds in this request. Additionally, flow restrictors (venturi inserts) are welded into the two core flood nozzles, also causing a limitation in scanning coverage for the components in this request. Removing the obstructions would require the RPV and the core flood nozzles to be redesigned and modified, which is impractical.
Although theoretically feasible, it is estimated that performing these examinations from the outside surface of the RPV would require several hundred man-hours to stage, erect and remove scaffolding, to remove and reinstall RPV insulation, and to perform the examinations. Based on radiological survey results from the spring 2012 refueling outage, this work would occur within 500 milli-Rem (mR) to 1160 mR per hour radiation fields adjacent to the RPV, resulting in a significant increase in cumulative occupational radiation exposure [dose] to personnel without a compensating increase in quality and safety.

Request RR-A36 Page 3 of 12
: 6. Proposed Alternative and Basis for Use Reactor Vessel Lower Shell to Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-34)
Alternative Examination:
The accessible areas of the weld have been examined using the TWS and ACCUSONEX system. These examinations have been performed from the inside surface of the reactor vessel by scanning the weld and adjacent base material areas above and below the weld. Examination scanning directions were both parallel and perpendicular to the weld axis. The aggregate examination coverage of the weld and base metal areas was approximately 58 percent of the required examination volume. In addition, a VT-3 visual examination of the reactor vessel interior was performed in accordance with the requirements of Examination Category B-N-1, Item B13.10.
Basis for Relief:
Figures 2A and 2B in this request depict the Reactor Vessel Lower Shell to Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-34).
Figure IWB-2500-1 defines the required examination volume. Ultrasonic interrogation of greater than 90 percent of this volume cannot be obtained due to interferences caused by the core guide lugs. The core guide lugs are welded to the reactor vessel shell just above the lower shell to bottom head weld and extend approximately 2 inches below the centerline of the weld. These lugs restrict the TWS manipulator's ability to move to areas necessary to fully examine the required volume. Access to approximately 42 percent of the examination volume is restricted.
The remaining 58 percent of the examination volume has been examined using the TWS and ACCUSONEX system. This examination has been performed from the inside surface of the reactor vessel by scanning the weld and adjacent base material areas above and below the weld. Examination scanning directions were both parallel and perpendicular to the weld axis. In addition to the required ultrasonic examination, the welds attaching the core guide lugs have received a VT-3 visual examination in accordance with Table IWB-2500-1, Examination Category B-N-2, Item B13.30, "Interior Attachment Welds Beyond Beltline Region." This VT-3 examination confirmed the lack of relevant conditions for the core guide lug welds, which would have indicated if the area of the lower shell to bottom head weld had been subjected to any excessive loads.
This weld was last examined during the third interval 10-year reactor vessel examination (October 2011). The examination volume achieved during this examination (approximately 58 percent) was similar to that achieved during the second interval 10-year reactor vessel examination. There have been no indications identified in this weld that exceed the acceptance criteria of ASME Section XI. The UT data sheet, flaw evaluation summary sheets, and UT scan plan for this weld are provided in the attachment to this request.
Due to the existing configuration of the reactor vessel, the examination requirements of ASME Section XI, 1995 Edition through 1996 Addenda are impractical.

Request RR-A36 Page 4 of 12 Reactor Vessel Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-35)
Alternative Examination:
The accessible areas of the weld have been examined using the TWS and ACCUSONEX system. These examinations have been performed from the inside surface of the reactor vessel by scanning the weld and adjacent base material areas above and below the weld. Examination scanning directions were both parallel and perpendicular to the weld axis. The aggregate examination coverage of the weld and base metal areas was approximately 46 percent of the required examination volume. In addition, a VT-3 visual examination of the reactor vessel interior was performed in accordance with the requirements of Examination Category B-N-1, Item B13.10.
Basis for Relief:
Figures 3a and 3b in this request depict the Reactor Vessel Bottom Head Circumferential Weld (Weld Number RC-RPV-WR-35).
Figure IWB-2500-3 defines the required examination volume. Ultrasonic .
interrogation of greater than 90 percent of this volume cannot be obtained due to interferences caused by reactor vessel incore instrument nozzles and core guide lugs. These instrument nozzles protrude through the bottom head of the reactor vessel to a height of approximately 1 foot from the inside surface of the bottom head.
Access to approximately 54 percent of the examination volume is restricted. The remaining 46 percent of the examination volume has been examined using the TWS and ACCUSONEX system. These examinations have been performed from the Inside surface of the reactor vessel by scanning the weld and adjacent base material areas above and below the weld. Examination scanning directions were both parallel and perpendicular to the weld axis.
This weld was last examined during the third interval 10-year reactor vessel examination (October 2011). The examination volume achieved during this examination (approximately 46 percent) was less than the examination volume achieved during the second interval 10-year reactor vessel examination, which was approximately 72 percent. This reduction in examination volume is directly attributable to the TWS equipment's design and operation, including a larger transducer sled, which limits accessibility. There have been no indications identified in this weld that exceed the acceptance criteria of ASME Section XI. The UT data sheet, flaw evaluation summary sheets, and UT scan plan for this weld are provided in the attachment to this request.
Due to the existing configuration of the reactor vessel, the examination requirements of ASME Section XI, 1995 Edition through 1996 Addenda are impractical.

Request RR-A36 Page 5 of 12 Core Flood Nozzle Inner Radius Sections (Component Number RC-RPV-WR-54155-W-IR)
(Component Number RC-RPV-WR-54155-Y-IR)
Alternative Examination:
The accessible areas of the examination surfaces have been visually examined utilizing the EVT-1 technique. The coverage obtained was 360 degrees around the nozzle, from the nozzle to vessel weld, to a distance approximately 3 inches deep inside each nozzle's bore. For each nozzle weld, this resulted in approximately 25 percent of the inside radius area of interest, as defined by the condition in Regulatory Guide 1.147, being examined.
Basis for Relief:
Figure 4 in this request depicts the Core Flood Nozzle Inside Radius Sections (Component Numbers RC-RPV-WR-54/55-W-IR and RC-RPV-WR-54/55-Y-IR).
Table IWB-2500-1, Examination Category B-D, Item B3.100 requires a volumetric examination as depicted in Figure IWB-2500-7. As an alternative to this requirement, Code Case N-648-1 (approved for use in Regulatory Guide 1.147, with conditions) allows performance of an enhanced visual examination (EVT-1) to satisfy this requirement. The area of interest for the EVT-1 is the external surface of Figure IWB-2500-7(b), as defined by the condition in Regulatory Guide 1.147.
Due to flow restrictors located inside the bores of the core flood nozzles, neither the UT nor the EVT-1 visual examinations could achieve the required examination coverage of greater than 90 percent. Because these flow restrictors are welded into the nozzles, their removal is not practical. The flow restrictors prohibit all UT examinations from the nozzle inside diameter. As a result, a limited EVT-1 visual examination was performed in lieu of the UT examination. The coverage obtained by the EVT-1 examination was 360 degrees around the nozzle, from the nozzle to vessel weld, to a distance approximately 3 inches deep inside each nozzle's bore.
For each nozzle this resulted in approximately 25 percent of the inside radius area of interest receiving a visual examination.
These areas were last examined during the third interval 10-year reactor vessel examination (October 2011). Because of the UT limitations described above, UT examinations were not performed. As an alternative, the EVT-1 examination requirements of Code Case N-648-1 were invoked, as approved for use in Regulatory Guide 1.147. Summaries of the visual examinations are as follows:
Component Number RC-RPV-WR-54/55-W-IR Examination Coverage            Examination        Comments/Remarks Type            Achieved        Results EVT-1           25 percent      No Recordable      Examined the accessible surfaces of the Indications (NRI)  nozzle inner radius for cracking, for a full 360 degrees, from the nozzle to vessel weld a distance of 12.5 inches Inside the nozzle bore (12.5 Inches Includes the flow restrictor). Total coverage: 25 percent.
The flow restrictor covered 75 percent of the inside radius examination surface.

Request RR-A36 Page 6 of 12 Com~onent     Number RC-RPV-WR-54155-Y -IR Examination Coverage             Examination        Comments/Remarks Type            Achieved         Results EVT-1           25 percent       No Recordable      Examined the accessible surfaces of the Indications (NRI)  nozzle inner radius for cracking, for a full 360 degrees, from the nozzle to vessel weld a distance of 12.5 inches inside the nozzle bore (12.5 inches includes the flow restrictor). Totalcoverage: 25 percent.
The flow restrictor covered 75 percent of the inside radius examination surface.
Due to the existing configuration of the core flood nozzles, the examination requirements of ASME Section XI, 1995 Edition through 1996 Addenda are impractical.
: 7. Durati*on of Proposed Alternative The proposed request shall be utilized for the third 10-year inservice inspection interval, which expired on September 20, 2012. .
: 8. Precedent*
The Nuclear Regulatory Commission (NRC) approved similar requests for the Millstone, North Anna, and Davis-Besse Nuclear Power Stations:
NRC letter to Dominion Nuclear Connecticut, Inc., 

==Subject:==
 "Millstone Power Station, Unit No. 3- Issuance of Relief Requests IR-2-51 Through IR-2-60 Regarding Second 10-Year Intervallnservice Inspection Program Plan (TAC Nos. ME3809 Through ME3818)," April 26, 2011.          [Accession No. ML110691154 NRC letter to Virginia Electric and Power Company, 

==Subject:==
North Anna Power Station, Unit No.1, Third 10-Year Inservice Inspection Interval Program, Relief Request N 1-13-PRT-004, Part A through G (TAC Nos. ME3333, ME5136, ME5137, ME5138, ME5139, ME5140 AND ME5141)," January 7,2011
[Accession No. ML110060011]
NRC letter to FirstEnergy Nuclear Operating Company, 

==Subject:==
Davis-Besse Nuclear Power Station, Unit 1 - Relief Request Nos. RR-A18, RR-A19, and RR-A20 for the Second 10-Year Inservice Inspection Interval (TAC No. MA7210),
June 4, 2001.      [Accession No.: ML011570068]
: 9. References
: 1. ASME Code Case N-460, "Alternative Examination Coverage for Class 1 and Class 2 Welds," July 27,1988.
: 2. ASME Code Case N-648-1, "Alternative Requirements for Inner Radius Examinations of Class 1 Reactor Vessel Nozzles," September 7, 2001.
: 3. NRC Regulatory Guide 1.147, "Inservice Inspection Code Case Applicability, ASME Section XI, Division 1," Revision 16, October 2010.

Request RR-A36 Page 7 of 12 Reactor Vessel Weld Layout W*Axl8 Core Flood IIollle I*Axll                                                            X-AxIS OVIleI NoIII.1H--HliI=----t------tlHliil-l+l Oullet Houl, Components In this Request ~          Rc.RPV*W............RInIIde IIItIIUI
                                                                         '.1'"
L..--_.,...,.....---------yJ ICoIIPV""""S-YoIR r-*--* -**-cr Radin
                                                                                             . I
                                            --t-----.
I i
                                                                   ~t--t-.-.-        .-
Weld In this Request     -+
Weld In this Request ~
Figure 1

Request RR-A36 Page 8 of 12 Weld        RC-RPV~WR-34
                                                                                                                 ... ALL "'("  VAI.JJES TAICE)j FRaU IlATIXC ,SURFACE ...
                                                                        '117U[II BASE  IID'Al8:"  (IIMTi>+
0.19,  t!OW'T l' 94.41' (IIJP) 0170.113' (R8S.3)I-_ _ _     r----;
                                                                                                                         ----------------------Z~-~I~
leer "I.f'HA                                !ELTA .. : 13..6Y (WN1fUM)
                                                                                                        "   .... ,~I.61
                                                                                                                       ,      BlofTI/2 - 4.22
                                                                                                 ".,.<~~.af.=====rf
                                                                                                            ~                           ----;mni"iiii~-
waD W04 i             z ~J08.J8  NOli!
I
                                                                                                 ;)'                                                           (AS-BUILT -307.50)
                             ~                              Ml41
                                                                                                            ~
TCJTAL       CIIIYERAGE OF' 'II&#xa3;l.I)
IS UIIlIED DUE 10                                                                                          WEl..O WIOni - 1.98 CCRE we OBSJRUrIICNS
                                                                                                            ~;~ '-7)
I'/IS ID: 11104 COIIf'OI\ENT ID: RC-"RPIH'IR-J+
                                                                                                                                                ,t,SME Imt NO.: 81.11 IISME CliTEGCRV: 8-A FlGURE~ 1WB-2:;QO-1 Figure 2A

Request RR-A36 Page 9 of 12 Weld RC-RPV-WR-34 DaTA -  15~
7.07 MAP/MAN SCANS           M1P SCANS SCANNING BETWEEN CORE LUGS Figure 28

Request RR-A36 Page 10 of 12 Weld RC-RPV-WR-35
                                                                                --- ----~z  = -291.94 Core Guide Lug ~
TWS 10: W05 COIIPONENT 10: RC-RPll-WR-35 ASII&#xa3; ITBI NO.: Bl.l1 ASME CATEGORY: B-A ACUR&#xa3;.: 1\fIB-2S00-1 0.81 (15'S1)
Instrument Nozzles      ~
I I
I I
I I
I 0.19 i
              ~iL--
t(81m)
                      ---  'lOTAL SCAN COVERAGE OF WElD Y/05 IS ullnm DUE TO 1'oIS lNTERfIRENCE W1TH INSTRUIIENTA!DI N02ZLES AND CORE LUGS Figure 3A

Request RR-A36 Page 11 of 12 Weld RC-RPV-WR-35 IV-AXIS 18            18 40 Ie
* 35 41
                                             * *
* J4 4Z
                                         *
* Jl
* Incore Instrument
* st
                                 "* '*"     Nozzles
* Z-::IS~&m3BI--.- ____ ~ _____           +__ _____""'___
                                                                ~
31
* iHE:fIISo'l~*t:"
1270')
                                     ~
                                        * *~ T***
15 10 ffi "
I i~ ~
3     D i :
a                 190'1
                                               *
* 1*        *
                                                   ~     I ~
Core Guide Lug   -+                       ~        ~1 V ~
49           1
   . (typical)
* I I
Y-AXIS 180'
[180']
Section Through Reactor Vessel (Looking Down)
Figure 38

Request RR-A36 Page 12 of 12 Inside Radius RC-RPV*WR-54/55 .. W*IR and ..Y-IR r---Inslde Radius Section (Typ)
Approx 3"                              +- Core Flood Nozzle with welded Flow Restrlctor Flow Restrlctor Top View Figure 4

                                                                 , ! II   AttaChment' ,!! I Request RR-A36                                Document No.: 51*9170868-000 Page 1 of 15 Davis Besse lO-year (17M) Reactor Vessel Weld Ultrasonic Examination Report A
A.,U.!VA                                                                                                    RPV Weld UT Data Sheet Uliilly:   FIrst Energy                               Plnnl:    DovlsB0880                   Unll:    Illn                0111&deg;0 0 :                     17M I  TWe Wold'Numbor:                 W04                CompunonllO:          RC~RPV*WR.34                         IISlImmo!), No.:        B01,011.052200 DOBer/pilon:           lower 8hoilio Bollom Hond Clrcum/orenllal Weld MK 17110 MK i8' Examlnallon I>roc~uro:           ~*ISI*801*02,     Automated UT of PWR Vessel SII!)II Welds. (wilh SDeN 1130-9170231,000)
Essential Equipment Description Monufaclurer                                     Modol                        VHf                  80rlol Numb"r                        Co,. Duo Dato Zoloo                                    IITomoscon                      7366                    18'21*06,                             81612012 lotoc                                     IO*ChPIR                       7970                 RSCT10Q99110                                nln UT Coble Type I Lenglh:                    Monlroao CBL*9847 I 28'                   RO-174 1.176'                         No. of Conlloclore:                  4 UT Callbratlon/Acqulsilion Software Vorslon:               AccU80~Ox*        6.6     I UJ Dala AnalysiS I Version: IAccusilnax.                             3.18 Calibration Information Cal. Shoot:                cos-,      I   Cal Block ID:       Vonel      RPV-95001 Equipment Settings PUI8et Source:          Elllarnal            Oaln80081:          Nona              Vollaqu:            300                  D'9111101l011 RalO:         12;1; MHz Flllor,:                 I'MHz               RF'Storo:           No                OalnAdJ.:           SlIllJ/O             Tljroahold (RO,:           ,5%
Pulae Wldlh:            IiOO                 PRModel             Dual              Delay:              0                    TIIftIahold (CGJ:          0%
Oa/8'8Iall:             *. 2rl-.16&deg;         0&1e810p:            '4.3&deg;/9.7'       ISyno. InlalVal:     0.Q8*                Recl.Modo:                 FW 801111 8peod:            10 Ips             Colncldonoe:         1 8eo attaclled dale,acqulsillon pagoa for addilionallnformdllon,                   ICouplenl:            Wele,              IVal8el Tamp:               88'F Transducers Tranedllc;er M~ufaelurar:              stOml!lOEIT                            UT,Heed:                    Bluo~
                                                                                                                     ~=J Ohllnb.l "'-glO         Modlt Beam DlreCllolI           Freq.      Galfal NUmbor             MOdel                                            811e                    BIIII
        ,        45"          S        ~8r/CiIC.        1.0 MHz          ,08010             SfAllle:' 5508             FIa'                '.rlL'~' (lQ1 POIIII 1.23" 10       ;41\"        'S        Axial '-are. 1.0 MHz           08012             81g;na: 5508               FlaI'               '.II'..r~I021               1;26&deg; 3        '7'"          L       ,AlIBI I arc. 1.3 MHz         OIMH&I           GEIT: 389-042-010             .6"      1.1... 316"11121. U'da' Cal'           0.95" 4         70'          l        AIIIaI/.arc. 1.3 MHz         OlMN8K           GEIT: ~2.o10                  .6'      1.6*.r..316'(1121. I.II-"WIII,         O.8r 6         48'          l        AliIal/arc. 2.7 MHz          01MN8C'          GEIT:,38~038.010               4"                 1.1'ir.16'tll2,             1.02" 8         46"          L        Mall arc.       2.7 MHz          OlT3F8           GEIT; :J89.038:OIO             4"                 ,,'-"'6"102,                0.&&0 eXamInatiOn coverage                                                                  I:Xamln8 .Jon R8eUl18 SOli 8e1in Plan II405tl78iJ                       Examlnallon 8Urf8~: ID               D No RG-dablv Indk:atlons                II      ~'aI~fllo 1n(I1....    'ona
  ,Exanilnallon Covorogai                 '58 %                                         II    Ewfllu,U!in ACco~,.1I16             IJ 'E,aluatlon Unaci:aplablo
   ~xtiinlilatlon' Liriillallolll Coro Lugs                                              II       ,8~ Atlached Flew Evalualion 8ummpry,8hlHllls)
  ~8mlns"on Dalolall                IOIt7120'U                                       Nilmos ofdato olllilWSIs forlllis Wotdllrolncludod on ilio allachod aMaia.
Remarks:
* I . Attachment Request RR-A36                       Document No.: 51-9170868-000 Page 2 of 15 Davis Besse IO-year (17M) Reactor Vessel Weld Ultrasonic Examination Report AUlIVA NP                                                                                  I      Flaw Evaluation SummalJl Shout .1 1  Component:        RC*RPV*WR*34                I                         Summary No.:                  801.011.052200 Customer:                    First Energy                       Plant:          Dallis-8esse             Unit:           n/a TWSWeld:                          W04                         Flaw No.: 1                                  Outage: 17 M Detection Flies:                  B1290_19.39.07 Sizing Flies:                     B1290 20.33.24 Transducer          Beam                       FlfJw Leng'" (Til eta)                                  Flaw Deplh
   *AtmfelMode           D/r.           Min. (deg)         Max.~ea}         Totalfdea}      Min. fin.}    Max. (In)      rotalllh.}
70'!. L        Alpha*             -72.59                -73.46         .{J,B7           0.40        0.52           0.13 Estimate of Flaw Length:     (CalcuI81~  !ht;t average of all lenglh values which are considered credible)
Length:                     1.31 In.                                              *0.8.7 deg.
Estimate of Flaw Depth: (Calculate the average of all depth values which are* considered credible)
Depth (naw height);                                               0.12710, Radius of Curvature@ Indication:                                  8S.90 In.
Depth of Flaw at Max. Amp.:                                        0,40 In, Max.Amp.:                                                           102  %
Max, Location:                                 Alpha =           101.66 0                     Theta =       -13.25 ;
Nominal Wall Thickness:                                            6.1)7 In.
Nominal Clad Thickness:.                                           0.19 In.
Evaluation:                  S:::                   0.2 2a::l                 0;10 a=                   0;10 y=                    1.00 L:;                 1.30 aJl=                  0.05 a/t=                    1.2%
MallllTiulTi Allowable alt:                         2.2%
Acceptance Standard:                 IW8~3510*1 Code Year:                        199& wi.h 96 Addenda DlsJW~l\Ion:                 SUBSURFACE FLAW                                                    ACCEPTABLE Comments:         Values used for eVilluatlon are rounde(lln accordance with Section XI IWA*3200.
This Indication was ~rded during the previous 81Ca"mlnation This scan 19 I>arallello the weld on the veas!!1 shell.
This Indication Is located within the weld and Is Indicative of a fabrication naw typical of slag Inclusions.
Performed by:                       Mlohael W Key                        Level:                III        Date:    10/11111 Reviewed by:                      Michael G Hacker                       Level:                III        Date:    10/20/11

I,  i*    Attachment'                    !
* i Request RR-A36                                  Document No.: 51-9170868-000 Page 3 of 15 Davis Besse 10-year (17M) Reactor Vessel Weld Ultraspnlc EXamination Report A                                                                                                         RPV Weld UT Data Sheet Anp.VA IJlilllv:  First Energy                              Plan.:       Davia Besso                       Unll:    "/a                 Ou'ago:                     17M TWS Wold Numbor:                W05                Compononl 10:            RC-RPV-WR-35                              8I1mma",No.:          801.021.052300 Desor/pllon:          Oollom tlead clrcumroronlln/*(Olool Wold MK 110 to MK 111 EXllm'n811l1n Proceduro: 54*ISI*801*02*. AlIlomaled UT of PWR Vessel Sholl Welds. (wllh SDCN 1130*91io231-000)
Essential Equipment Description Manufacluror                                     Modal                            VKII                 Sorlol Numbar                       Cal. Duo Dalo Zoloc                                   "Tornoscan                           7366                    18121-06                             8/5120.2 Zeloa                                     '6*CbPIR                           7970                 RSCTlOO99 110                              nla Ur Cab/o Typo I Longlh:                  Mpnll'!lso COL*9847 I 28'                        RO*t74 I 176'                   I No. 01 Connoclors:                    4 UTCalibrallonlAcqulslllon Soltwara Varalolll               IAccusonex-         6.0        I ur Da.aAnalyBIB I Varelolll IAccusollox -                         3.18 Calibration *Informatlon Cal.8bBOI:              CDS*'     I Cal BIocll ID:              Vessel    Rpv*9500t Equipment Settings Pulsar Sourco:        External          ODIn Bo081:               NOIIa              Voltago:                300                  Dlglllzallon Ralo: '2.5 MHz PlllOr.:              1 MHz             RFSlore:                  No                 OalnAdJ,:               SInlIIa              Threshold (RO): 6%
Pulso Wldlh:         600                PRModo:                   Dual               Dolav:                  0                    Thillshold (CO): 0'lIt Oale8l8rt:            *.2r1*.16"        0010 Slop:                14.3"/9.7"         Syno. 11I101Yal:        O.oa"                ~c'.Modo:               FW SCan Bpoed:          Sips               ColncldellCO:*            1 8eo IIlIlIeh.II dala acqulalllon pagal lor addillonal Information.                  ICOup'anl:                Waiar              IYessei Tamp:            881' Transduaers transducar Manufacturar:           SlgmalBEiT                                   UTHliad:                      Slua.1I3 MIHI,I**             .Paaili.                                       SlIIi Channal Angla         MOdo Beam Dlillallo..           '~aq.         Sodal Numlier                                                                 Slia
                                                                                                         , .             Dept".                                      '1!4i~'
1       45'*       S       MoI/Clro,          toMHi               O8Oto                . SIgma: 6508.               Flal               1.2'0.16' 1M31            '.23" 10        48"       S        MaUClRl;           u:MHz               08012                  Slomo:'6508                Flal               l.r-.16*(Jia1             1.28"
     '3       7\'        L       AIIIn,' ClIO.      t3MHz              D1MN8J            GEIT: ~Q42-010                    .6'     1.5'11.31&' (021. u*... ,6'C..,     0.95" 4       10'        L       AUai/eiro.         t.3MHz             DIMMlIK           OEIT; 389-042-010                :5-      1,$'d'6'(Jia~       U""6'ldl        O.8r
     *5.      48~        L       AUal/CIrc.        .U*MHz              QIMNBC            OEIT: :J89.038.I)10               4~                1.1-'.76*11i2I            Ul2" 8       48'        l       AUaI I Clrl!.     .2.7 MHz            Ofr3F8            .OEIT: 38M38-0IO                  4"                1.1''''6' (IQ)            0.88' Examlnatlon Ooverage                                                                        Examination Results Soo*8Oan Pion 00519790                         .EJcllltllnallon 8urlallO: ID             CI      H61DcOr1hllllO IndlbllClllt         &I. Roeordablo'n4111l!\k!11e Elamlnailon Cov:orago:              40%                                                  &I      ~YIIIIN!i'on "",,,,abIO              i:i EvaluatIon U~ID Examl""'lioil Llmllallon:        Instrumontollon Nozdoo'and Core:wg8                     iii          880 AllaChedFlaw Evalua1lon 8umma", Shaet(e) 8xamlnallon orllo(sl:             1011712,,11                                      . Namaa     0'  dl!l8.a~)5la ;., thIs wBld are Includod on Iho allacllod sheela.
Remarks:

Attachment            .I I Request RR-A36                      Document No.: 51-9170868-000 Page 4 of 15 Davis Besse 10-year (17M) Reactor Vessel Weld Ultrasonic Examination Report AUEVA Nil                                                                                     I   Haw Eva/llatloll Summarv Shoot     I I Component:        RC-RPV-WR*35            I                             Summary No.:                   801.021.052300 Customer:                     First Energy                      Plant:           Davis-Besse                Unit:           nla TWSWeld:                           W05                     Flaw No.: 1                                      Outage: 17 M Detection Flies:                   81290_03.29.57 Sizing Flies:                      81290 04.33.25 Transducer          8eam                       Flaw Length (The to)                                      PlowOep'h Angle/Mode            01,.            Min. (deg)        MaK. (den)       Totol (den)    Min. fin.)      MIIK.J/n}       To'al (In.J 45':.8         Alpha +             165.64            166.03            0.39           3.57            3.73            0.16 Estimate of Flaw Length: (Calculate the average of all length values which are considered credible)
Length:                     0.64 in.                                              0.39 deg.
Estimate of Flaw Depth: (Calculate tlllil aVlilrageof all depth values which are considered credible)
Depth (flaw height):                                             0.1631".
Rf,ldluB 9'CUi'Vsture@ lildlcallon:                              75.02 In.
D~th 0' FlaYtal Max, Amp,:                                        3.71 In.
Mill(. Amp.:                                                        41 %
Max. Location:                                 Alpha =          128.02  0 Theta =           1d5.64 ..
Nominal Wall Thickness:                                           5.57 In.
Nominal Clad Thickness,                                           0.19 In.
Evaluation:'                 's=                    1.8 28=                   0.15 a=                  0.10 y=                  1.00 L=                 0.55 s/L=                  0.16 aft =I                  1.5%
MalClmum Alto,WEible all:                          2.9%
Acceplance,StllildiUd:                IWB*351 0*1 CQdeYear:                          1995 with ,06 Addends Disposition'                  SUBSURFACE FLAW                                                 ACCEPTABLE Comments:        Vaiu~ used for evaluallon are rounded In accordanca with Section XI. IIiVA*3200.
This IndloaUon waB not recorded dUring the prBViouS eXlul1lnallon This scan Is parallel to tlie Yield oil the \laSsel sh$lI.
This Indication Is located within   t~e weld   and Is indica live of a fabrlcallon flaw Iyplcal  0' slag IncluslQns.
Performed by:                       Michael W Key                       Level:               III           Date:     10/17/11 Reviewed by:                       Michael G Hacker                     Level:               III           Date:     10120/11

                                                       , :: .I\Uachment'         "I  h   *.
Request RR-A36                    Document No.: 51-9170868-000 Page 5 of 15 Davis Besse lO-year (17M) Reactor Vessel Weld Ultrasonic Examination Report AREVA NP                                                                                   I   F/ltw F.vaillfltion Summary SI,oo, I I Comp_onont:       RC*RPV*WR-35           I                             Summary No.:                  801.021.052300 Customor:                    Fl,rsl Energy                     Plant:          Davis* Besse             Unit:              nla TWSWold:                         W06                       Flaw No.: 2                                  Outago.: 17 M Detection Flies:                  81290_06.16.03 Sizing Fllos:                     81290 10.64.49 Transducer         8eam                       Flaw Length (Theta)                                    tJlaw DfllJtlt Angle/Mode          Dlr.            Mln.Cdogl          Malt. (degJ    Totsl (dog)     Mln.lln.J     Malt.llnJ         Totsilln.)
46'!. L        Alpha"              282;93              283.49          0.56          2.10           2.20              0.10 45&deg;- L         Aipha '"            282.93              283.65          0.62          1.98           2.08              0.10 I=stlmale of Flaw Lenglh: (Calculate Ihe aver~ge of alliengih va,lues whIch are consIdered credible) lenglh:                    Q.7011).                                             0.59 deg.
E~tlma'e of Flaw Depth; (Calculate the average of all depth valuesWhIc~ are CQnsldered credible)
Oepth (naw helghl):                                             0.101 lit.
Radius of Curvalure@ Indication:                                73.43Ih.
Depth of Flaw al. MaX, .AmP.:                                    2.1210.
Max. Amp.:                                                         27;,%*
Max. Location:                               Alpha   =         127.85*,                   Thola   =        ~~,29"o Nominal Wall Thickness;                                          5.57 In.
Nominal Clad Thickness:                                          0-19'1".
Evaluallon:                 S:=                    1.8 2s='                  0.10 s;::                0.00 y'-:                 1.00
:i.=                0.00
                             ~~                    0.05 a~:::                  1.0%                                                                               I' Maximum Allowable,a1I:                             2.3%
Acceptance Sland8~d:'                 IWB-3610-1                                                                                      I 1f195*wllh l)6 Addenda eOdeYear:
DlsposlUon:                  SUBSURFACE FLAW                                                 ACCEPTABLE Commenls:         Values ..used forevalualloo.are rounded In,accordancewllh Section XI IWA-320D.
ThllUndlcslioo WasitOl'i'ecordBd during Ihe,preVloua examination This scan Is parallel 10 ttie wald,on the vessel shell.
This Indication Is localed within Iha weld and Is Indicativa of a fabrlcaUo".flaw Iyplcal of slag Inclusions.
No measureablo Ihrough-wall Oldel'll. Mlnvaluo assigned Is 0.10";
Performed by:                        Michael W Key                      Level:                           Dale!       10/17/11 Reviewed by:                       MI&#xa2;hael G Hacker                     Leilel:
                                                                                             '"           Dala:       10/20/11

                                                         '! . '. Attachment, I::         I Request RR-A36                      Document No.: 51-9170868-000 Page 6 of 15 Davis Besse 10-year (17M) Reactor Vessel Weld Ultrasonic Examination Report AREVANP                                                                                         I Plliw Evalllatlo" S.lIlltUlllY Slmor I I    Componont:         RC-RPV*WR-35         I                                Summary No.:                 801.021.052300 Customor:                     firslEnargy                       Plant:          Davis-Besse              Unit:              nla TWSWold:                           WOil                      Flaw No.: 3                                   Outogo: 17 M Detecllon Flies:                    B1290_06.51.16 Sizing Fllos:                       B1290 10;34.08 Transducer           Beam                     Flaw LeIJDth (TI,eta)                                    FI&WOepth Angle/Mode            Dlr.           MIn. (dellJ         Malt. (claD)   Total (dell'   Min. (In.J     Max. (lnl        To,ol lin.'
45'!.S        Alpha +             346.99              349.30          2.31           3.29          3.40              0.11 Estimate of 'Flaw length: (Calculate the average of all length values which are considered credible) length:                      3.14 In.                                             2.31 deg.
Estimate of FI,aw Depth: (C81culaie tha'average of all depth values whlch'ara considered C!'~ible)
Depth (Daw height):                                               0.112 In.
Radius of Curvature@ Indlcailon:                                  74.6!> In.
  , Depth of Flaw at Mall, Amp.:                                        3.34 In.
Mtiii:. Alt!pi:                                                       49%
Mint Location:                                Alpha    =         125.54 0                   Theta   =       349;15  ~
NOn!lna! Wall Thickness;                                            5.57 In.
N'ilillil c;:ta~ Ttll~n~:                                          0.19 In; EvaluatIOn:                   S=                   2.2, 2a=                 0;10 a'"                0.00 V=                  1.00.
l=                3.10 a/L=                     0 81.t=                     1%
Maximum Allowablea/t:                              2.1%                                                                                  , '
AccepianceStandard:                    IW8-3511>-1 Coda'vear:                         1995 with '96 Addenda Disposlllon:                  SUBSURFACE FLAW                                                 ACCEP,TABlE Comments:           Values used for evallJaUiJn*are rounde(fin accordancewJth Sectlc,,"XI IWA*3200.
this Indlcatlonwas*not recorded during the Pfm/lOus examlnallon This scan Is parallei to ihe weldon the V8Sselshell.
Thls'lndication Is located within the weld and Is Indicative of.a fabrication naw,tYQlcal ofaleg InclusionS.
 . PerfprRJed by:                        Michael W Key                       level:              III         Date:      10J.17111
   ~evla,,!ed by:                      MlchaelG Hacker                       level:              III         Date:      10/20/11

                                           ?                                        ..                                             4                                                3                                                             1 RR~36r---~------~~--~~~~~~~
Page 7 of 15 SCAN PENlIHCATION NUMBER Z
* SZP .(Shltl) II SZN (Sholl)
WELD'                         ~il-DD!>!'~3 90'                                                             270'                                                                                                        (NUMERICAl. 01-99)
[270']                                                           [90'1 RESERVED fOR SIZING SCANS SIP (5),,,)
P(~..!RtCAL       01-99)
SI'N(Sfiall) rtRST L&#xa3;TTER IS SCAN* TY?E SECOND L&#xa3;l[R !S SCAN DIRECTION 0'                                                               THIRD L&#xa3;.TllH IS N..... OR C (NEGA11IIE.
I                                                                 POSTIfNE, OR CUSTOM; IN THtS CASt SHCU' THrTA NtCA-rvE I
1WS TOOL HEAD DESICNATION Y                                                                                                                               [   IN THIS CASE HEAD CONFlGURAnON ,3
['811']                                                                                                                               BASED ON THE fIRST SCAN UHE OF THE PA7CH erne; StANO. If THE CONTACT HEAD DIRECTIONAL ARROW IS PaNTED IN JWS SCAN PLAN VESSEL LAYOUT                                                                                                                              THE OIRECTJON OF' THE FlRST SCAN UH&#xa3; TH[ SCAN IS CONSlO[R(J TO ae POSITM.
NOMENCLAtURE LECEND                                                                                                                             IN n-IS CASE NECATJVE. THE ARROW POINTS (USE THROUGItOUT SCAN PIA.)                                                                                                                         IN floE OPPOSITE DlRECTlON OF" THe FlRS'"
                                        *     - SIlt AlaS. EITHER ** I. Y. or Z                                                                                                                    $CAN UH&#xa3;
[~    : ~ ~ t:~ Igw~)                                                                  '80' SCA,.'111'rP[;
L TOOL HEAD OR,ENTATION KEY                                                               S*SNU ARRmrHCADS SHOWN ARE
                                                                                                              ~ESOOATIVE or COKTAC'T HEAD                                                          ~ : ~:~~:1I01 IlREcnONAI. ARROW                                                           F
* Pil)8 twtIS BESSE 1 - REEEREnq ORAWINGS EPA SCAN PI AN gpng't SCAN QIREC"nON 1041110     REV. 3    !filLET NOZZLE FORCINC 1041760     REV.   ,    UPPER SHELL FORCING                                                                                                                                             Z
* ELEVATION FROU MATiNC SURFACE 1041800     REV. 3    YESSIl. F1>>ICE FORCING                                                                                                                                                 ('llEGATlVE DOWN INTO VESSEL) 1041840     REV. 0 . LOWER HEAD FORGING 10S292C     REV. 0    0UTl.EJ NOZZlE F'ORCINC                                                                                                                                          T
* THETA ANeLE tROu VESSEL rr 105294(:    REV.* 1     CORE FLOODING NOmE FORGING                                                                                                                                            AROUND V(S5tl AXIS (NCGATM 109$210     REV. 1      LOWER SHEll. f'ORGING                                                                                                                                                 IS CLOCKWISE LOOKING INTO VESSEL) lQ9~22D     REV. ,      LOWER SHEll FORGINC                                                                                                                                             R _ DISTANCE FROu VE$S(l AXIS (POSITIVE 1097110     REV. 2      UIXIIFlED INSTRUIIENTATION NOZZLE DETAIL                                                                                                                              AWAY F"ROW YEssn. AXIS)
           '20582C     REV**       LIST OF DRM'IHGS R&#xa3;ACTOR YESSIl. _             OUTUHE - SIEI I TWS TOOL HEAD DESIGNATIONS                                                   B
* BETA AMGIl: F"ROU NOZZLE ZERO 1499llE     REV. ,                                                                                                                                                                            (TOP 000 CENTER ARO<JNO NOZZLE AXIS) 1499J.4E    REV. 6     mJ) PREPS - SIEI 1                                             HEAD No.            HAIlE                                        usc.                                  POSIM IS a.cannsc LOOKING INTO 152055&#xa3; 152056[
REV. 7 REV**
REACTOR COCII.ANT PFING ASSDlBLY - FUN*\tEW R&#xa3;ACTOR COIIIN'T Pf'IHC ASSDISLY " El.EVATION VIEW
                                                                                                      ,        fL01r SICIRT IOOL                           eEHlND F\.OW Stem                             NOZZLE FROU VESSEL.
W
* DISTANCE F"ROIII NOZZLE AXIS to HOZZLE 154613&#xa3;     REV. 6     ARl!AltGDlOO _              YESSIl. LONe S&#xa3;CTIOII 2         lx4 TOOt H90                             NOZZLES - oocello..                             1.0. SURF"AC&#xa3; OR SHEll* SCAN LIMit.
1S4614&#xa3;     REV.
* ARRANGEUENT REACTOR VESSEL SECTIONS (F'OSITM: IS AWAY rROW NOZZLE eENrtRUNO IMaI.5[     REV.*      MATERIAL LIST HEAD a: vtssu.                                      . l         2x3 TOOL tOO                          SHru - D(T[C11ON    a:  SIZING
                                                                                                                                                                                        --- .. A
* A.LAUt. ANClE fROu TANC;(NT PaNT OF 1$4616&#xa3; 1~617[
1~61BE 1S461!JE REV.
* REV. ,
REV. 3 REV. 2 UPt'ER SHa!. ASSDI8LY SHEIJ. ASSEII81.Y AND HEAD DETAILS COR[ FLOODING NOZZU:
orr.... .flU) SUB-A.SSEJ,I&Y 0UTl&#xa3;1' NOZZLE
* 5 CORE    noo:>  TOOL 2114 TOOL H&#xa3;.trD COR~    FLOOD 'If02ll&#xa3; - DrECTlON .!t SIZING NOZZLES - SIZING AXIAL r....ur5 (1    0' 2)
THE SPHERICAl RA(iIUS OF" THE l.OW&#xa3;R IoI&#xa3;AO rOR SCANS Of" w-t.lOS IN n.E LCWCR IICAO m:~ON (YrRlOlOfoWS) 1S462OE 1~(j21E 1~462J[
R.."V. 2 REV. 2 REV. l DETAIl. ANI) SUII-ASSEIIIlLY INL&#xa3;T NOmE IIIISCEl.lMEOUS 9m. 0[lAU.S VE'SSQ. tOD ASSEMBLY - LOWER HEAD 7
2x4 TOOL HEAD 2x4 TOOL HEAD NOZZLES - SIZING AXIAL r.J,.'fIS (2 of "
NOZZLES - SIZINC C1RC fLAWS (1 of 2) 1~624E      RF:V. 2    INSTRUM&#xa3;NTAnON HOlM DETAlLS Net ASSaIBLy 1~62!E 1!>4637E REV. 2 REV. 2 vtSSD. ASSDB.Y Me) F1NAL MACHINING CUll)[    sruo  AND SEAL PlUC
* 2114 TOOL   H&#xa3;A[i                NOZZLES - 5121-'C elRc FlAWS (2 of 2) 1S464lE 1547Z0E REV. 0 REV.*
CORE FLOOD NOZZLE fLOW R&#xa3;STRICTOR MODIFIED INS1"RUWEN1"AnON NOZZLE
* W[lY    INJEcnON TOOL         SAfETY IN.lCCTlON t.OZZL..[ - DETECTION 6: SIZING 185J04E     REV. 0     MISCELlANEOUS F1>>ICE DETAILS
  ""'pyRE fflWW 2011 B                                                                                                                                                                                   3                                                             1 a
* 6L6LS08   .1 9         I                          7 I                          ..                  I              Attachment                                    .                            I             3 I         2 I                     ..
Request RR-A36
    ~
1IEVISUIa ..... ~_~I.&#xa3;VD.)
Page 8 of 15                                                                                                    I D
                                                        ...        ---f\----                                             II D
I-
                                                  ~j
                                                                     ~[&sect;J"'~ r=~
45"5                         5'1.:0 J,.
CHNINELI 2
4$'S IIOOEI.
                                                                      ~~~
T
* 70'1.
70'1.
lBSI-cM2-G1D 381-042-010
                                                                                                                                                                     **       4>'1.
4>'1.
lBS-GlII-Gl0 3a-G3S-0IO e
                                                             ""        . . ,J                                           "
e 2.3 UT HEAD CONFIGURATION                      13 FOR SHELL SCANNING (AS V1[1I&#xa3;I) FRDII ..... aF 1ICIIOtW<D CClI'LGOC)
~
9 CHANNEL 2
I "sT!'" HEAD 13
                                -1011' -1.44"'
                                -1011'     ......
0.011' -1.4t' "1' "ntET" 1IW<SDUCEJI U'S U'S 70'1.
CHNINELI 2
                                                                                       "S2P" HEAD
                                                                                             -1'
                                                                                                    ..011' lJIII'
                                                                                            ....... 0.011' 13 4$'S 70'1.
                                                                                                                                ..-n.I 2
                                                                                                                                       "MAP" HEAD 13 r--
                                                                                                                                          -1.44"" lJIII'
                                                                                                                                           ...... o.arr
                                                                                                                                    ** -1.44" 1lCE!' DESICIIAI10N
                                                                                                                                           .,44' lJIII'            ....
70'1.
                                                                                                                                                                                    -I 2
                                                                                                                                                                                              "IITP" HEAD #3 rOLl'M     ntET" l.OI1' -1.4....
lJIII' 1.4....
o.ocr   -1.44"'
4$'S 4$'S 70'1.
9
* 0.011'    ......      70'1.                                        o.ocr         70'1.                               o.arr         70'1.
* o.ocr    ......          70'1.
s        '.011' -1.44"'        45'1.
                                                                                    * ....... ->.011' .....
                                                                                         -          -lJIII'                          s     ...... -lJIII' .....    .....                  *       -1011' -1.4t'             4>'1.
                        *        ..011'    ......      4>'1.
* I .....                4I1'l
                                                                                                                                     *     -1.'1'    -lJIII'
                                                                                                                                                                                          *       - ..011' 1.4'"          '4I1'l I-CHNINELI 2
                             "STN" HEAD
                                 ..011'    ......
                                 "011' -1.44'"
o.ocr      ......
13
                                   -1' "ntET.. 11WISDUCDI DESICNATION 4$'S 70'1.
CHANNELl "52N" HEAD
                                                                                             -1'
                                                                                  * ...... ->.011'
                                                                                         -I ......
                                                                                  ** -1.4'" 0.011' "noc
                                                                                    * ...... - ..111' o.ocr 13 DE5ICNAI1CN 45'S 40'S 70'1.
                                                                                                                                ..-n.I 2
I "WAN" HEAD
                                                                                                                                          -1.4'-
                                                                                                                                   ** -1.44'"
                                                                                                                                                     -lJIII'
                                                                                                                                                     ->.011' o.arr 13
                                                                                                                                         -AIJ'KC "ntET" 11WISDUCDI DE5ICNAI1CN 70'1.
C>IAN1ID.I 2
I "IITN" HEAD
                                                                                                                                                                                                   ~
                                                                                                                                                                                                  -l.0If'
                                                                                                                                                                                                  ->.011' o.ocr
                                                                                                                                                                                                           -I .......
13 DESICNATION 45'S 45'S 70'1.
r-0.011'    -1.44"'      70'1.                                                     70'1.                     ....... o.ocr        70'1.
* o.ocr   -1.4f"           70'1.
                       **      -J.lX1'     ......      46'1.
                                                                                 **        1..... lJIII'       '5'1.             * -1.4       ....  >.011'       .....
* lJIII'   I .....         45'1..
A
                               " * .rII1* -1.44'"      0'1.                              -'.44'" lJIII'          '5'1.             * .......         lJIII'        45'1.
                                                                                                                                                                                         *         >.011' -1.44"'          45'1.                                                                 A YEM~~~~i 201' I ...... 10
                                                                                                                                                                                                                                                     """" I""
                                                                                                                                                                                                                                                                        -.      ..8m1979 0 rOOD 9
I                       7 I                                              I                 "                         I                                            I             3           2 I

7                              6                           Attachment Request RR-A361-L....------L..---~~
2
                                                                                                                                                                                                                                   ... 1
                                                                                                                                                                                                                      ...=n-~-~&sect;;i*-~...~......iiI*
Page 9 of 15 o                                                                                                                                                                                                                                                  o c                                                                                                                                                                                                                                                  c b4 UT HfAD CONFIGURATION '2                                               2.4 PIPE SIZING HfAD LOAD ,.                                       2.4 PIPE SIZINC HrAD LOAD ,6 FOR NOZZLE SCANNINC                                                        FOR AXIAL FlAWS                                                     FOR AXIAL FLAWS tAS VIEWED FROM EMQC OF'           ROEDtIUC)  c::OIJPUNC)                 (AS vom F1IIDW uac: OF    ADIIOHAICD COUPUNC)                      (AS VIDItD f1IOa.t so or ROSOtWCI COUPuNC)
CIWo.&#xa3;L ,
1
:z.
45S 15'1.
IIlDIl.
IUII&#xa3;R 3011 CHOHNEI. ,   ............
DESiCIIAIIDII
                                                                                                                      -IICDEl.
                                                                                                        ...... ........-oao lIII-G51~"
CHOHNEL ,
111     Jai-05G-BJl 4
                                                  .sa-o&2-GID
_-042-010                                             ...... .............
5                 ""-           3D-042-o10
                                                                                                        ...        388-051-141 a
7 80 45'S POOf1I..Ir             -
3Il1-04.2-010 3011 0074 l89-G9-Hl lBI-Q58 .... IO a
     "INL&#xa3;T '" OUTLET PBN (HEAD IN R- ORIENTATION)
_ , **r "oar
                                                  ==   ....
                          -1.44'"
                          -1,U"           ,...,.       15'1.
I .....        1.....       ""-
                          -I .......     -1M'          ""-
1.U"          -I.SO"        ""-
                          -I....... -4M 1.U" o.ar
                                       -4M            ....
15'1.
b4 TOOL HrAD PROFILOMETRY TRANDUCER LAYOUT INILT NO=
b4 TOOL HfAD PROFILOMETRY TRANDUCER LAYOUT A                                                  --"Ir                                                                                      DUTl&#xa3;1" NO=                                       NO'"
G&#xa3;OII[IRY FtR PIP[ SllDIC HEAD L.DIDS 5, a, 7. ,. a TO BE INPUT ON A CASE BY CAS[ BASS.
e                           7                                                                                                   ..                3

__I I                    I                                             I            Attachment 6L6L;OB B
7                                         0; I     3 I           2 I                 1 Request RR-A36
   ~
                                                                                                                                                                                                          ~CAU..aTl""'IIEV~J Page 10 of15                                                                              1 D                                                                                                                                                                                                                                      D CItI
                                                     "'OlIO l.OllO "'OlIO                                                l.OllO     "'ODD   l.OIIO
                                                                            /",'1                                                                    r" CH,2
                                                   \ /                                                        CItI" 1 ; ~ n---
                                                                                       ' I om CItI
                                                                                                                        \                     /               I
                                                                                                                                                           ~ __ om II 71                                                                                 c
                                                                                                                          ~
C
                                                                                                      ~1 CONTACT HtAD
                                                                                                                                                 ~
0IREClI01W.                                                                                      I
                                                                                  ~,.                                                                      ~,.
r
                                                                                                                      ~~I ARROW C;:;l                  ::;:.                                                                    ~
                                                                                           ,                                                                 ,7 CItI CH:)
2.4 PIPE SIZING HtAD LOAD
                                                                      \,.
17 CH, CH,
                                                                                                                   ')
214 PIPE SIZING H&#xa3;AD LOAD L.        IS FOR CIRC flAWS                                                      FOR ORe FlAWS
                                      "".,.."FRDII"""'or ......... _ l                                      CAS VIEWED FROW BACK Of RODCIIWIJ COUPLING)
In_
CHANNEl., 1RANSDI.C[JI DESICNA_         IIDDD.
NUIIIIER 1RANSDI.C[JI
                                                                                                                               """"",nON IIODD.
NU.....
2 CO' lBI-056-811                                   2 OQ l8J-G56-aJ1 B                                                                                                                                                                                                                                      B l
Yf                                                    l             -----
* lOll ..........
* lBIt-G5&-1I1Q Yf lIII-OSI-8J I I
l5' I
l8I-G58-4SD
~                                                                                                                                                                                                                                       ~
GmUElR'f' fOR PIPE SlZlNC HEAD UWlS 5. 6, 7** 8 TO BE IHPIJT 01\1 A CASE BY CASE BASS.
A                                                                                                                                                                                                                                      A 10 vrM"'~ YESSEL.~'~- 2011 b4rm~~~1NC
                                                                                                                                                                                                    ... n
                                                                                                                                                                                                                 -       8O~1979 0 fooo B
I  7 I                        0; I                I                        4 I     3             2 I                 1

7                                           6
                                     .--rr (rtJ
                                         !CORE
                                         ! n.ooo D                                                                                                                                                                                                                                                                                                                      D 011 (2"'1
                                         ,                                                                                                        'III'
('III']
                                                                                                                                                                                                               'III'
('art) c                                                                                                                                                                                                                                                                                                                     c
                                       'III'
('art)                                                                                                                      PLANT QRIENTATIONS CONTAINMENT lAyouT ......
(USED rtIROUGtOJr SCM PUll)
        *rr -   sat '4SSEL AXIS ('I, X. Y, DI" Z)
              - 1WS AICCUJJIR LA'I'DUT - RICHT IWCD RULE (cct' IIfEhDIO (rtJ  - SIIE ........ lA_ (C'r 1IRIl:1IIIII)
                                                                                                        ~  j'111ffi""""""""""""""1""""""""""",,,1",1,1,
                                                                                                                            ~           ~           !                       ,                                                                  TWS WE!    P  WORK    SCQP[
IICILIlIR.-:tIlII.. '_10" ,                                           mlA>>.an..
                                                                                                                                                                                                          ""'CllCdRJlJllllL8II.LIIlII(IIlllXmDQlM.'.lDlM.na
                                                                                                                                                                                                          &.GIII~IICILMl.D(llD.Dlil:mDQ"IJ01D"I71 1II.DII.cDIII 1D1.A1I.1152taC1    ........,......,
1C.oIPHI-I-o(I,MJQ
                                                                                                                                                                                                          &.CaI.:u.ID . . . . IOD~mD.lnlD.1I'I IIIIIIIIIICIIICCIftIIDIIIIL(DISC)IrUI"'l1ft1 *
* 14" ..... a.~IIIZ2ll1UIIIlLIE1D.IJlIO.I.                                                1C ......-M,19-4 B                                                                                                                                                                                                                                                                                                                     B IlD'DFat..,. . . . IDl"~1ClZI.[1I)1'I'[
                                                                                                                                                                                                         . t / I.... IIDIIKlIfIDH&LIIUI. III II .. III                                           11;....41--10/12.,..
                                                                                                                                                                               -1.*IDJI-'
1IS-4IaJ'--Ia.>>       lI'iII'ICD~CJSD.1ID1IIlU1E1D                *   ':1010. ,a"'-I)                        1t......... I~IJl W * ...ti:!ISCMmllDZZl,[lDlIGLmDlM.lIIlDlIIl'.                                         IC~IVI,,"-I Wl)P\JINT_ -lasLOD-                                                                                               'OJ  W'1IXlIII<<BI.CI.II1DtGZZU:lDl'I'l'mD. &a1D.1I* * '-!)                 ....IIJ1Pa       IC. .~.I.JIIIU.
* J!".... -.o.:mu: rDMl.lmD"           11i1DIM. . .                                 C ......-IID/U-vr La.Dt PlANT * -ZOI.OO-                                                                                                   lJI'''':IDIDCIIII'OSIl.1UT1GZZl.l1ElD .12011.'11(11-4-:1)
                                                                                                                                                                               - l - - = " __
                                                                                                                                                                                                    ~.
                                                                                                                                                                                    ......,.*-21W         I4"HiIII.-IUllllCIIIZZUIlIIICILIIUI.Ulm *
* IC......~
  ....                                                                                                                                                                                              ~I
                                                                                                                                                                                                         . . . . . . . 1C"'..... a.n.oc.;aarIllM Jlr/l.mllPtGmrDlICILmDlM"lIlDfilll.                                    ............
                                                                                                                                                                                                                                                                                ....  ,...,.,... 1C"""'-10!1t-f!l
                                                                                                                                                                                                    ... II' JllElI11KA111IDL1ID1IIZIU:1DD
* 1.'11. IIZ .....J)                                  IE............ I *
                                                                                                                                                                               - I * .........
                                                                                                                                                                                                         *
* I..alSOUIlDIIIZZLIIQIIIlLIIlD . 1 . 1 Q . I .
                                                                                                                                                                                                         . . IfICRII GSIL CIUZLD' ICIllI.l rD N'[ IDD" I.
II'l/toGlUI' IIIZZLI rD KU.IOD. III II'lJIII[rDlDClllllamlUl'lICImIlOD .1J01Q.la~
                                                                                                                                                                                                                                                        'II."
tD'" III 1'11-1-1) 1C~-I.vI"'2.,
1C~-I-fl111I 1C~IQ/11-lJI
                                                                                                                                                                               -1.-"":11                                                                                                         ~,--
NOmE Z """"""'"
AL~~-'..-r'                                                                                                    ==~~~
A caa: flOIDfI,"
lID_gill'!                         iii II Ii ill A I Ii" I. a:.;: A" Be ;:1        G:;'I 0' ;   v..    ;;
                                                                    =,;:;:                    ::        II I II I II II II III II I II III I II I CdlIJUIIIt_11ID'J tu:rZ6I1.,
lUI' . . . I.,                                                                                                                                           *  -.at 10 '!'EM ~~
III IIIOCIll e                                             7                                             6                           ~                  4                                         3                                              2

Attachment                                                                                   2
   ~~-=~~----~7----~~~(;----~~RequestRR-A36r-~~~~--~~----~~~~~'-~-~~~-~~~~~'
1.
_ .... -1' -t..,.._P...,;a9=-e_1_2_o_f_1_5.....
                           *'"'OO ..... IIE1>L~
                                          .... (1IIIT,)
o                                          o.ll1lGl                                         CHANNa FIRING                                                                              o 14.4'"                                                                      2.3 HEAD    3 (YIP)
                            .,,..O.l (RD5.J')I-----!                                  owom.      STATUS 0C11VE AC11YE AC11YE 2.3 UT HEAD CONnGURATION #3 FOR SHELL SCANNING (AS VIEWED FROW BAa(  OF RIJ3DtWG) COUPUNC)
                                                               --------z - -..,...
I'..........
c                                                                                                                                                                                      c wtLD wnmt - I.n
                                                                               .... 11>. ...
COIIPCHIIT lit. RC-RPY-WR-l4 ASUE IJDI NIl: &1.11
     !~
ASIIE CAIECIlRY: Ih\
F1Q.IIL:  1IB-Z500-'
B                                                                                                                                                                                      B DETECTION      scAN  PARAllmR5                                              SCANNING BETWEEN CORE LUGS I                                                                  SCAN         INDEX INTDlIIAL       SPEED i                                                                                 0.5'             la IPS WAX
               ~
IIlP                  0.0&"
O.ll' lIN'          0.5'    O.OS"    la IPS WAX I                                                                                O.ll' WAH           0.5'    o.Oft'   la IPS WAX O.ll' SIZING SCAN PARAllmR5 SCAN         INDEX INTDlIIAL       SPEED
.                                                                        IIlP          O.t' 0.1.3' 0.1' O.Oft*   12 IPS WAX                                                                     .
lIN'         0.1.3'   O.oft'   12 IPS WAX WAH           0.1'    O.Oft'   12 IPS WAX 0.1.3'
                                                                                                                                                     ... SHE&#xa3;T' REF&#xa3;REHC[ """"""'"
2 B              7               (;                                                                       4

Attachment                       6                                                                               ..                               2
  ~l;;;~;;:;;:;::;-1Request RR-A36L_ _ _ _ _ _ _;;-;::-~---------------
1----L,a..:.:.:::..:.;,;.,..;....;.;;.;.,..;--1.....:.P..;:a~g:=.e,;;....1_3_o_f_1_5___ AU. "r \OU.O 'MOl FIG ""... SURF"'" _
                                                                           "71.00 MEl'AL=Tl BAS[
                                                                                         .... (IIIIr'1 o                                                                                         0.10 .....                                                                                                       o "70.63  (RI5.l'I,----!
                                        "'.88" 2.3 UT HEAD CONF'CURATION 13 FOR SHELL SCANNINC (AS ..,z.wc FROU IW:K (Jf ROIIOtWCD COUPUNC)
Z - -291.84                       CHANNEL FIRING
_ _2xJSTA1IJ5 HEAD    '3 c
w.......
0'
[0')
TWS 10: WCI5 CCYPONENT ID: AC-RPlt-WR-35 ASIIIE nEW NO..: 81.11 ASII[ CATGORr: 8-A FQIRE..: 1WB-25DO-t                                                         B DETECTION SCAN PARAMETERS SCAN         INDEX INTERVAL            SPEED Iot1P        0.;'      0.011"      IS IPS WAX 0.3l' IITN         O.!\'*    0.08"       IS IPS WAX O.JJ" SIZING SCAN PARAMETERS SCAN         INDEX INTERVAL            SPEED Iot1P        O.t*                  12 IPS WAX O.ll'     0.011" V-AXIS IITN         O.t*      O.OS"       12 IPS WAX                          ['80'1 O.ll' B                                    7                                   6

Attachment                  to              " .                                                                   2 1 RequestRR-A36~----~~--------------~--~----~--~~~d-~~~-~-~n~-~~~~.
  ~--~----~~~~
Page 140f15
                                  ~----~--------~."".~~~----~        .... (BII")
D                                                                     0.11_.
                                                       " '*.83 (RI5.J,)------!
1151.14" 2.3 UT HEAD CONFIGURAnON #3 FOR SHEU SCANNING (AS WlIED FRDW BACK r1F RDBDJoWa) CCUPUNC)
I            HEAD ~                                                               Z * -291..94 I'.........                                                                                                   ~N~~~G c                                                                                                                                                             c i                                                                                                        OWOEJ. STATUS i                                                                                                                 ""'"
I                                                                                                                 ""'"                       o-  rr i                                                                                                                                               [IT]
i                              OD.TA * '1.73'
                                      ,IW'1IWIl i
                                       ~'          , "
B 0'"
(1!iS)
B DUEcnDN SCAN PARAIAETERS SCAN       INDEX INTERVAL      SPEED R1I7.25                                                             IIAP       OS'    O.OS"    18 IPS WAX
            .... IIETN.                                                                      0.31' IIAN       OS'    O.OS"    18 IPS WAX O.J1' SIZING SCAN PARAIAETERS SCAN IIAP INDEX INTERVAL oz' 0.11'  O.OS" SPEEO 12 IPS WAX                          v_  ...)
                                                                                                                                                 .,[I...
A IIAN        oz'    O.OS"    12 IPS WAX 0.11' B                               7                         to

Attachment                                                                                     3                             2                    1
                                                                                                                                                                                                                                                                               ......................uv~1 6L6~C;OB                                                                                6 i
I B                            7
  ~.. IiRC.RPV~WR.34 and RC-RPV.WR-35                                                                                               Request RR-A361
       "                                                                               I                                                   Page 15 of                                  is D                                                                                                                                                                                                                                                                                                         o t:r                                   ~ r~l~'11II
                                    ~l'IIII'lijl'qll'qll~II'IIII~I'q~'~~'II~'IIII'lm'I'I'111l~m~I'IIII'I~I'lijl'q~~~r~I'IPijll'll   '11'qIfI II~I~I,~'Iijl'I~~~I'II~'lijl'~I'III'q~'IIII'IIII'II~'ijl'qWIIII'IIII'11'r111'lijl'IIII'1111 M                                                  III
[II                                                   ~
(lII r.I                                       ~                                             1:1:1                                            ~                                                       t:I-     ZCO.oo WI    L-                                     --in                                             t                                                                                          -J - ~_i2.552~-a't~i)
J;;;%\~/,-+-\ -(~)
                                                 \~)I~~;-
c                                                                                                                                                                                                                                                                                                         c W02   F-                                     -:::t::-
                                                                                   !,           -          -        -         iI,                                           -=1=-  .1,                                      -  ~           -   z*   -133.38 NOM.
(-1J2.50 AS-BUILT)
I    i.                                 i         'I                       '                          1 I'
__________ ~                        I                                             I'                                                  I' WO.l
                                                                                  ,I ------------.-----                        I                  -------1----------                                                                       - - Z * -220.88 NOM.
(-219.6J AS-BUILT)
B                                                                                  1
                                                                                   '                                           i,                                                 I' B
I                                            I,                                                 I' LOWER HOO  ~- tiiiiii n *m.;;;;;,-fl---*.-rrl1t-=-fl-=*fl----:-riJr.--*-n--=-fi-.---1!In-:.---IFII--,,-.-.!RI.----~
WII4                                                                                                                                                                                                        - - Z * -J08.J8 NOW.
(-307.50 AS-BUILT)
I was I!'H                                          lit -tfI-i--rmtB,. 8                                                                     - - Z * -J41.88
:;~~;:Ii                   ~       :::;;:;~~~                      :;;   ;n    ~    ~     N           ~~            !5!:;: ~                        ~~:;.;5!~~                                    ~
Iii I I                            ~~III                           I I III II                                       i           n                   11111111 DIIU     WOP SCAN              _              IIlP SCAN I SCAN AREA - WELDS WQ4 AND WQS
                 ~        ... SCAN              _              I/IlOSCAN 4                                                   3
                                                                                                                                                                                                                                                                  , . SMU:
2                    1 B                             7                                               6
                                                                                                                                       "}}