View source for Information Notice 2005-13, Potential Non-Conservative Error in Modeling Geometric Regions in the Keno-V. a Criticality Code

{{Adams
| number = ML051180228
| issue date = 05/17/2005
| title = Potential Non-Conservative Error in Modeling Geometric Regions in the Keno-V. a Criticality Code
| author name = Hiland P, Pierson R
| author affiliation = NRC/NMSS/FCSS, NRC/NRR/DIPM/IROB
| addressee name = 
| addressee affiliation = 
| docket = 
| license number = 
| contact person = 
| document report number = IN-05-013
| document type = NRC Information Notice
| page count = 4
}}
{{#Wiki_filter:UNITED STATES

NUCLEAR REGULATORY COMMISSION

OFFICE OF NUCLEAR REACTOR REGULATION

OFFICE OF NUCLEAR MATERIAL SAFETY AND SAFEGUARDS

WASHINGTON, D.C. 20555 May 17, 2005 NRC INFORMATION NOTICE 2005-13:                 POTENTIAL NON-CONSERVATIVE ERROR IN

MODELING GEOMETRIC REGIONS IN THE

KENO-V.A CRITICALITY CODE

==ADDRESSEES==
All licensees using the Keno-V.a criticality code module in Standardized Computer Analyses for

Licensing Evaluation (SCALE) software developed by Oak Ridge National Laboratory (ORNL).

==PURPOSE==
The U.S. Nuclear Regulatory Commission (NRC) is issuing this information notice (IN) to inform

recipients of a potential non-conservative error in modeling geometric regions in the Keno-V.a

criticality code. It is expected that recipients will review the information for applicability to their

facilities and consider actions, as appropriate, to avoid non-conservative results. However, suggestions contained in this IN are not new NRC requirements; therefore, no specific action

nor written response is required.

==DESCRIPTION OF CIRCUMSTANCES==
Keno-V.a is a Monte Carlo particle tracking code that solves the neutron transport equation in

arbitrary three-dimensional geometric configurations. Keno-V.a is part of the SCALE software

package.

An ORNL staff member identified a problem while performing a criticality safety benchmark

evaluation in which some cases produced 1 to 1.5 percent lower k-effective (k-eff) values. This

statistically significant difference was brought to the attention of the Keno-V.a code manager at

ORNL. ORNLs review of the discrepancy determined that the observed difference in k-eff was

attributed to round-off error.

ORNL provided diagnostic guidance on its website for SCALE users to determine the impacts of

round-off errors on calculated k-eff results:
http://www-rsicc.ornl.gov/rsic-cgi-bin/enote.pl?nb=scale5&action=view&page=56 ORNL also provided preventive guidance, for SCALE users, to avoid modeling geometric

configurations that were potentially sensitive to numerical round-off errors. Subsequently, ORNL

issued a Keno-V.a patch to fix the numerical round-off error in SCALE Version 5. ORNL did not

issue a patch for earlier versions of SCALE. NRC informally notified fuel cycle licensees of the

existence of the Keno-V.a error.

NRC is continuing to evaluate the extent of the error and the adequacy of the patch. If relevant

new information is obtained, NRC will provide the information in a future communication.

==DISCUSSION==
Modeling geometric configurations using Keno-V.a is accomplished by defining regions

composed of simple geometric shapes. Holes are one type of geometric region that could be

used to construct complex geometric configurations. Holes may contain bodies or arrays

having any geometric shape. The numerical round-off error only occurs when using the hole

option to define geometric regions and the body in the hole is a cylinder or hemi-cylinder. A

similar round-off error was previously identified and corrected for holes containing other

geometric shapes.

The reported condition arises when the end face of a hole, whose outer boundary is a cylinder

or a hemi-cylinder, shares a common flat boundary with another hole, region, or unit. Neutrons

crossing the common boundary are incorrectly tracked when the numerical round-off error

causes the code to misinterpret which region the neutron is entering. If the tracking failure

results in missing absorber material, calculated k-eff values could be overestimated. If the

tracking failure results in missing fuel, calculated k-eff values could be underestimated.

ORNL has recommended that geometric configurations that were modeled using

cylindrical/hemi-cylindrical holes be checked for shared boundaries. If shared boundaries exist, ORNL recommends inserting a small gap, larger than potential round-off error [at least 1.0 x 10-5 cm (3.9 x 10-6 in.)], between the boundaries. ORNL has also issued the following patch, for

SCALE Version 5, that can be downloaded from the SCALE website:
http://www.ornl.gov/sci/scale/download kenova.htm . This patch is intended to prevent tracking

errors in geometric configurations having boundaries. If the patch is installed, the modified

Keno-V.a code should be verified by re-running validation cases to ensure the code is working

correctly.

==CONTACT==
This IN requires no specific action nor written response. If you have any questions about the

information in this notice, please contact the technical contact listed below.

/RA/                                                  /RA/
  Patrick L. Hiland, Chief                            Robert C. Pierson, Director

Reactor Operations Branch                           Division of Fuel Cycle Safety

Division of Inspection Program Management             and Safeguards

Office of Nuclear Reactor Regulation                Office of Nuclear Material Safety

and Safeguards

===Technical Contact:===

===Lawrence Berg, NMSS===
                        301-415-6215 E-mail: ljb2@nrc.gov

Attachment: List of Recently Issued NMSS Generic Communications

Note: NRC generic communications may be found on the NRC public Web site, http://www.nrc.gov, under Electronic Reading Room/Document Collections.

==CONTACT==
This IN requires no specific action nor written response. If you have any questions about the

information in this notice, please contact the technical contact listed below.

/RA/                                                  /RA/
  Patrick L. Hiland, Chief                            Robert C. Pierson, Director

Reactor Operations Branch                           Division of Fuel Cycle Safety

Division of Inspection Program Management             and Safeguards

Office of Nuclear Reactor Regulation                Office of Nuclear Material Safety

and Safeguards

===Technical Contact:===

===Lawrence Berg, NMSS===
                        301-415-6215 E-mail: ljb2@nrc.gov

Attachment: List of Recently Issued NMSS Generic Communications

Note: NRC generic communications may be found on the NRC public Web site, http://www.nrc.gov, under Electronic Reading Room/Document Collections.

ADAMS ACCESSION #: ML051180228 OFC                FCSS/TSG           Tech ED            FCSS/TSG           FCSS/TSG

NAME               LBerg:dw*          Ekraus: by fax*    RCesaro*           MGalloway*
  DATE                04/28/05           05/02/05          04/28/05           04/28/05 OFC                NRR                NRR                NRR                 FCSS

NAME               JWermiel           CRoque-Cruz        PHiland             RPierson

DATE               05/10/05           05/13/05           05/13/05            05/ 17 /05

Attachment

IN 2005 -13 Recently Issued NMSS Generic Communications

Date     GC No.                 Subject

==Addressees==
04/18/05 RIS-05-06    Reporting Requirements for     All material licensees possessing

Gauges Damaged at              portable gauges, regulated under

Temporary Job Sites            10 CFR Part 30.

04/14/05 RIS-05-04    Guidance on the Protection     All holders of operating licenses

of Unattended Openings         or construction permits for nuclear

that Intersect a Security      power reactors, research and test

Boundary or Area               reactors, decommissioning

reactors with fuel on site, Category 1 fuel cycle facilities, critical mass facilities, uranium

conversion facility, independent

spent fuel storage installations, gaseous diffusion plants, and

certain other material licensees.

02/28/05 RIS-05-003   10 CFR Part 40                 All persons possessing aircraft

Exemptions for Uranium         counterweights containing

Contained in Aircraft          uranium under the exemption in

Counterweights - Storage       10 CFR 40.13(c)(5).

and Repair

05/17/05 IN-05-013    Potential Non-conservative     All licensees using the Keno-V.a

Error in Modeling              criticality code module in

Geometric Regions in the       Standardized Computer Analyses

Keno-v.a Criticality Code      for Licensing Evaluation (SCALE)
                                                     software developed by Oak Ridge

National Laboratory (ORNL)
05/17/05 IN-05-012    Excessively Large              All licensees authorized to

Criticality Safety Limits Fail possess a critical mass of special

to Provide Double              nuclear material.

Contingency at Fuel Cycle

Facility

04/07/05 IN-05-010    Changes to 10 CFR Part 71      All 10 CFR Part 71 licensees and

Packages                       certificate holders.

IN-05-007    Results of HEMYC             All holders of operating licenses

04/01/05                  Electrical Raceway Fire      for nuclear power reactors, except

Barrier System Full Scale    those who have permanently

Fire Testing                 ceased operations and have

certified that fuel has been

permanently removed from the

reactor vessel, and fuel facilities

licensees.

03/10/05     IN-05-005    Improving Material Control   All licensees authorized to

and Accountability Interface possess a critical mass of special

with Criticality Safety      nuclear material.

Activities at Fuel Cycle

Facilities

Note: NRC generic communications may be found on the NRC public website, http://www.nrc.gov, under Electronic Reading Room/Document Collections.}}

{{Information notice-Nav}}