View source for DCL-16-011, Attachment 2 - Pacific Gas and Electric Company Diablo Canyon Power Plant Units 1 and 2, Process Protection System (PPS) Replacement Interface Requirements Specification Nuclear Safety-Related, Rev 9

{{Adams
| number = ML16049A011
| issue date = 01/25/2016
| title = Attachment 2 - Pacific Gas and Electric Company Diablo Canyon Power Plant Units 1 and 2, Process Protection System (PPS) Replacement Interface Requirements Specification Nuclear Safety-Related, Rev 9
| author name = Helfer J
| author affiliation = Pacific Gas &amp; Electric Co
| addressee name = 
| addressee affiliation = NRC/Document Control Desk, NRC/NRR
| docket = 05000275, 05000323
| license number = DPR-080, DPR-082
| contact person = 
| case reference number = PG&amp;E Letter DCL-16-011
| package number = ML16049A006
| document type = Response to Request for Additional Information (RAI)
| page count = 112
}}

=Text=
{{#Wiki_filter:--V The CD in Attachment 5 of the Enclosure Contains Proprietary Information Withhold from public disclosure under 10 CFR 2.390 Enclosure Attachment 2 PG&E Letter DCL-16-011I Interface Requirements Specification, Revision 9 The CD in Attachment 5 of the Enclosure Contains Proprietary Information Withhold from public disclosure under 10 CFR 2.390 When separated from the CD in Attachment 5 to the Enclosure, this document is decontrolled 

This page left blank by intent Process Protection System Interface Requirements Specification Revision:
9 Page 3 of 78 REVISION HISTORY Revision Affected Reason for Revision Number Pages 1All Initial Issue 1.4.4.8 Added STP 1-33 1.4.5.4 ALS Topical Report is Rev 1 1.5.2 Revised Tricon PLC description 1.5.3.1 Deleted STB and COM boards -not used 1.5.3.2 Clarified ASU capability 1.5.3.3 Added section and new Figure 1-1 to clarify ALS A and ALS B connections to SSPS 1.5.5 Revised section to clarify signal characteristics and open RTD detection 1.5.5.6 Revised TCM communications description 1.5.7 Added PPS Gateway Computer Scope and CC4 system health HMI unit 1.5.8 Added Response Time Allocation Clarified PRXM and RRXM chasses notation Figure 1-2 Reassigned safety-related OOS switches to safety-related PRXM Chassis 2 through Replaced Class 2 PS Failure contact inputs to Class 2 RRXM with safety-Figure 1-21 related + 24 Vdc PS output to safety-related PRXM chassis Removed FW flows from Class 2 RRXM Appendix 3.1 (I/O General revision List)2.1.1 Clarified ALS input loop power supply , Clarified PTC Thermistor terminology 2.1.2 Deleted reference to Fig 2-2 through Fig 2-4 2.3.3 Added new section -one-way communications link from ALS to Maintenance Workstation.
Renumbered remaining sections.2.3.6.3 Protocol is Ethernet based Appendix 3.1 General revision (All sheets) Clarified "Safety-Related" and "Non-Safety-Related" items Entire Document Changed MVDU to Maintenance Workstation 1.3.1 Added Electrical Class 1E definition, clarified instrument class definitions 1.4.4.9, 1.4.5.5, Added references 1.4.5.6, 1.4.5.7 1.5.7 Clarified port aggregator tap description and scope 1.5.8 ALS response time is 150 ms for temperature channels per ALS comment Figue 11 Added Ioopback from trip switch load side; port aggregator tap is PG&E scope;through 3 Figure 1-21 Figure 1-14, Figure 1-19 corrected typos in descriptions Figure 1-22 Updated figure. per ALS topical report.2.! 'larifed /lO-power-supply requirements and-scope 
--Figure 2-2 Clarified TE-413A and TE-423 for illustration only 2.3 2.7.1 Updated communications Figure 2-1________ Fiure2-3 Added new figures per ALS coordination meeting 05/17-18/2011 Process Protection System Interface Requirements Specification Revision:
9 Page 4 of 78 Reviion Affeted Reason for Revision Number Pages 1.5.3.3 Figure ~11 Updated per ALS design documentation 1.5.7 Updated isolation per ALS design documentation 1.5.8 Updated response time per ALS documentation Figure 1-2 Figure 1-3 Figure 1-7 Figure 1-8 Figure 1-12 Updated figures to illustrate ALS Line Sense Modules and external Trip Switches Figure 1-13 Figure 1-17 Figure 1-18 Figure 1-6 Figure 1-16 Updated figures to include Class II power supply failure discrete inputs Figure 1-21 Figure 1-22 Corrected class break 2.1.2 Clarified Triconex Al cards~Figure 2-1 Figur 2-2 Reformatted 2.1.4 Added LSM description Figure 2 4 Figur 2 5 Added figures 2.7.2.3 Updated per ALS design documentation Gloalr(not Deleted proprietary information designations 1.4.3.4 Added reference 1.4.4.4 Deleted reference to SCM -not relevant to this document 1.5.5 Revised section title for clarity 1.5.6 Clarified:
Maintenance Workstation is not used to configure the Tricon Discussed TAB connection to ALS 1.5.7 Editorial Figure 1-2 through Updated and replaced Figure 1-22 52.1 Moved Figures to end of Section.2.2 Updated 2.1.1 Revised Item 5 and 6 -Power supply output voltage will be determined in the detailed design.Moved item 4 from 2.1.2 to Item 4 in this section and renumbered.
_____________Updated Item 7 2.1.2 _ Updated Editorial corrections Removed unused items -not requirements Figure 2-2_______ Figure 2-3 Updated per Triconex Field Termination Guide Process Protection System Interface Requirements Specification Revision:
9 Page 5 of 78 Reviion Affeted Reason for" Revision Number Pages 2.3 Updated section per vendor hardware descriptions 2.3.1 I/O power supply locations determined by detailed design 5, cont. 2.3.2.1 Editorial corrections 2.3.6 Updated description -There are two TCM cards in the Tricon Main Chassis.2.3.6.1 Updated communications 1.1 Removed "... Later.."discussion 
-Later items resolved at this revision 1.3.2 Updated acronym list 1.5.4 Updated Isolation device description Figure 1-1 Updated Title Fgrs1-52, 1-3 Updated Prot Set I instrument tags and power supplies Figures 1-7, 1-8, Updated Prot Set II instrument tags and power supplies 1-10, 1-11 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _6 Figures 1-12,1-13, 1-15, 1-16 Updated Prot Set Ill instrument tags and power supplies Figures 1-17,1-18,1-20, 1-2 Updated Prot Set IV instrument tags and power supplies Deleted descriptive sections; information not needed here -contained in other 2.7.1 documents.
Updated section title Vendor CS Innovations 2.7.2 Deleted descriptive sections; information not needed here -contained in other documents 2.8 Added new alarm interface requirements section 1.3.2 Added HMI, KVM to Acronyms Table 1.4.5.6 Corrected document number 1.4.5.8 Added DCPP ALS System Design Specification 6116-00011 1.4.5 1.4.5.9 Added ALS Platform Specification 6002-(00011 1.4.5.10 Added DCPP ALS-ASU Communications Protocol 1.5.3.3 Revised last sentence; trip switches may be used to generate a partial channel trip independently of the ALS logic 1.5.6 Split MWS into two units; one each for Tricon and ALS 1.5.6 Added KVM switch, KVM 7 Figure 1-2 1. Change BYP/OOS Alarm to BYP Alarm Figure 1-7 2. Updated ALS power supply tagnames and descriptions Figure 1-12 3. Added RCS flow isolators (except Prot Set IV)Figure 1-17 4. Updated ALS TxBI and TxB2 interfaces
: 1. Change BYP/OOS Alarm to BYP Alarm Figure 1-3 2. Updated ALS power supply tagnames and descriptions Figure 1-8 3. Added RCS Flow isolators (except Prot Set IV)Figure 1-13 4. Added ALS Maintenance Workstation (Cont. sheet)Figure 1-18 5. Added KVM Switch, HMI peripherals (Cont. Sheet)6. Updated ALS TxBI and TxB2 interfaces PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 6 of 78 Revision J Affected I Reason for Revision Number Pages ______________________
Figure 1-5 Figure 1-10 Figure 1-15 Figure 1-20 Changed "Manual Trip Switch" to "Trip Status" Corrected directional arrows between from PRXM to RRXM (Figure 1-20 only)1. Added TC454B alarm DO (Set IV Only)Figur 1-6 2. Delete "PCS" from TM-454A analog output (Set IV Only)3. Changed BYP/OOS alarm to BYP alarm (New OOS alarm below)Figre -11 4. Added "PPS Set x Channel Out of Service Alarm" DO to MAS Figre -16 5. Added "PPS Set x Time Synch" Dl Figre -21 6. Remove ALS data links to MWS; clarified MWS is Tricon 7. Added KVM Switch, HMI peripherals Fiue1-22 Split MWS into two units; one each for Tricon and ALS. Added KVM switch, 2.1.1.3 Deleted manufacturer reference (Moore) -implementation detail 2.1.1.6.j 20 ohm isolator input is estimated 2.1.1.6 Deleted "adjustable" Added "input" 2.1.1.7.a Add "24 Vdc"; deleted sharing of Tricon analog input and output power supplies 2.1..7.c Analog output power supply cannot be shared with discrete signals per Tricon 2.1..7.cvl10 qualification 2.1.4 Added new figure to illustrate LSM functions Figure 2-1 Renumbered remaining figures Updated ALS analog input ioop power supply designation; clarified 24 Vdc Figure 2-2 (was Changed ALS-321 from internal current shunt mode to external current shunt Figure 2-1) (voltage) mode Added example Rs calculation for information only Changed ALS-321 from internal current shunt mode to external current shunt Figure 2-4 (voltage) mode Figure 2-32wa Updated Tricon analog input loop power supply designation; clarified 40 Vdc Revised to reflect separate ALS and Tricon MWS computers and disconnection 2.3 of the TAB when the ASU is not in use.2.7.1 Added KVM switch description 2.7.2 Added ALS TxB and TAB protocol references Figure 2-6 (was Updated to show SSPS and RNASA ETT DO Power Supply voltage TBD by Figure 2-5) detailed design Figure 2-7 Added New figure to illustrate TAB communication cable connections 2.8.3.2.2)
Added reference to FRS New Section -Application constraints and requirements:
2.9.1 Tagname length restriction 2.9.2 Modbus aliases 2.9 2.9.3_Tagina~me convention 2.9.4 Disallowed function block names 2.9.5 Quality Codes______________2.9.6 Online Maintenance and Test Interface 7, cont.Appendix 3.1 Reformatted Split Tricon OOS/Bypass MAS output into individual OOS and Bypass DO Corrected tagnames and engineering units various sheets Added new points and Tricon quality check for Gateway Computer all sets Corrected ALS Power Supply failure alarm descriptions PSII and PS Ill Revised cells are shown in red text Separated into individual appendices for each Protection Set Process Protection System Interface Requirements Specification Revision:
9 Page 7 of 78 Reviion Affeted Reason for Revision Number Pages Figures 1-4, 1-5, 1-6, 1-9, 1-10, 1-11, 1-14, 1-15, Added Tricon Chassis numbers 1-16, 1-19, 1-20, 1-21, ________________________________
Figurs 1-, 1- Added Class Il ERFDS Pressurizer Level analog outputs for constructability 11, 1-16 Figres1-6 1- Added HMI peripherals controlled by KVM Switch 11, 1-16, 1-21 Figure 1-22 Added Tricon MWS unmanaged Ethernet Switch 2.1.1 .6.j Clarified ERFDS input impedance Figure 2-6 Clarification 2.3.1 and 2.3.2 Clarified Tricon Class II communications hardware Deleted ALS TAB enable switch; TAB cable must be physically connected to 2.3.4 enable TAB 2.3.7 Clarified KVM Switch requirements 2.7.1 Added Tricon MWS unmanaged Ethernet Switch 2.7.2 Clarified ALS MWS TAB communication requirements 82.8.2 Clarified PPS Trouble Alarm requirements 2.8.3 Editorial change 2.8.5 Clarified RTD Failure alarm requirements 2.8.6 Clarified TTD Timer Actuated alarm requirements 2.9.5.2 Editorial 2.9.6.6.3 Clarify Tricon Test in Bypass/Test in Trip Sequence 2.9.6.6.4 Clarified "bistable outputs" vs. 'channel outputs" per ICM comment 2.9.6.6.5 Moved section from 2.9.6.6.4.c per 1CM comment 2.9.6.6.5.1 Added FRS reference 2.9.6.6.6 Added FRS reference for Tricon bypass switch 2.9.6.7.8 2.9..7.9 Clarified ALS external Trip and Bypass switches Added read-only aliased memory tagname requirements for intermediate 2.9.7 variables.
Appendix 3.1
* Revised Tricon I/O hardware assignments for constructability Appendix 3.2
* Added PPC variable names for information only Appendix 3.3
* Revised analog input and analog output loop impedances
______ Appendix 3.4
* Revised cells are identified in red text PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 8 of 78 Revision J Affected 1 Reason for Revisi6n Number Pages ___________________________
This Table, all revs Reformated; changes not highlighted This Table, Updated Appendix 3.1 entry: Added "Split Tricon 00S/Bypass MAS output into Rev 7 individual OOS and Bypass DO" Various Revised document outline for consistency
* Changed CS Innovations to Westinghouse per Westinghouse comments 1.2 08/28/2013
* Added "SSPS" to connected systems* Editorial change* Added definitions of "shall," "should," 'will," and "may" 1.3.1
* Added definitions (Bypass, Test in Trip, Test in Bypass, Out of Service)* Added definition of "defeat" 1.3.2 Corrected ALS acronyms (ASU); deleted unused acronyms* Added SDOE 1.4.3.1 Reinstated Reg Guide 1.75 per SAPN 50583555 1.4.3.5 Added Reg Guide 1.152 Rev 3 1.4.5.5 Changed CS Innovations to Westinghouse per Westinghouse comments 1.4.5.6 08/28/2013 1.4.5.11 Added NEI-08-09 1.5.1 Deleted reference to Figure 1-1; not relevant; editorial changes 1.5.2 Editorial change 1.5.3 Changed CS Innovations to Westinghouse per Westinghouse comments_____________
08/28/2013 1.5.3.1 Updated ALS board descriptions 1.5.3.2 Updated ASU description 1.5.3.3 Editorial change Figure 1-1 Updated power supply voltages 1.5.4 Added "Westinghouse;" separated requirements 1.5.4.3 Deleted isolation device range; not relevant 1.5.4.4 Added "shall" 1.5.5 Updated per Westinghouse comments 08/28/2013 1.5.5.2 Added RCS Flow scaling 1.5.5.3 Updated RTD signal processing 1.5.5.4 Added RTD output ranges to Tricon 1.5.5.4.3 Moved Tricon temperature input mx+b filter requirement from 15.3.3.2 to here.1.5.5.5 Clarified OOR Low 1.5.5.6 Clarified downscale fail Clarified ALS qualified board input range. Split requirements and moved to 1.5.5.7preceding sections.1.5.5.9 Clarification 1.5.5.10 Added requirement for analog output signals to fail low on detection of critical failure.1.5.6 Separated requirements; editorial changes 1.5.7 Separated requirements; clarified ALS-1 02 CLB Separated requirements 1.5.8 Changed milliseconds to seconds;______________Editorial changes* Changed ALS "Containment High-High Channel in Test" alarm output to ALS Figures 1-2, "Out of Service" DO; Deleted "Alarm" and "MAS" from other system-level DO 1-3
* Updated ALS power supply tagnames and descriptions to agree with SDS___________
6116-00011 RevI1 Figure 1-5 Added loss of input power to Dl card 9 Figure 1-6* Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input Process Protection System Interface Requirements Specification Revision:
9 Page.9 of 78 Revision 1 Affected [Reason for Revision Number I Pages Revision Affected Reason for Revision Number Pages Figures 1-7, 1-8* Changed ALS "Containment High-High Channel in Test" alarm output to ALS"Out of Service" DO; Deleted "Alarm" and "MAS" from other system-level DO* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 9, cont Figure 1-10 Added loss of input power to Dl card Figur 1-11 Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input* Changed ALS 'Containment High-High Channel in Test" alarm output to ALS Figures 1-12, "Out of Service" DO; Deleted 'Alarm" and "MAS" from other system-level DO 1-13
* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 Figure 1-15 Added loss of input power to Dl card Figue 116 Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input o Added Workstation/ASU to Al output Figures 1-17,
* Changed ALS 'Containment High-High Channel in Test" alarm output to ALS 1-18 'Out of Service" DO; Deleted 'Alarm" and "MAS" from other system-level DO* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 Figure 1-20 Added loss of input power to Dl card* Deleted Tricon TC-454B PZR Vapor Space Temperature Alarm from project Figure 1-21 scope; TM-454A analog signal goes to MCR and PCS* Deleted Tricon Time Synch discrete input Deleted note regarding unused KVM switch ports -consistency with LAR Figur 1-22 Supplement (Rev 1); no design impact 2.1, Updated I/O List reference to Appendices 3.1 through 3.4 (now Appendices 4.1 Various through 4.4)2.1.1 Updated power supply descriptions; editorial changes 2.1.1.1 -2.1.1.7 Miscellaneous clarifications and editorial changes 2.1.1.5 Deleted 2.1.1.7.h Clarified ALS 'A" and 'B" series input resistance is 200 ohms (Rs= 100 ohms)2.1.1 .7.i Clarified Tricon input resistance when powered from FTP vs. externally powered* Clarified isolator input resistance is 100 ohms 2.1. 7j Removed reference to I/O List Deleted duplicate requirement to power Tricon analog and discrete inputs from 2.1.1.8.cdifferent sources. Also d uplicates info in VI0 Tricon Topical Report 2.1.2 2.1.3 Miscellaneous clarifications and editorial chang'es 2.1.4 2.1.2.5 Deleted 3721 -not used Figure 2-1 Corrected feedback signal to ALS-302-A Dl Figur 2-2 General Revision Figure 2-3 Figur 2-4
* Added"'FOR INFORMATION ONLY"* General Revision Figur 2-5 Relocated LSM downstream of manual bypass switch-* Added Byoass switch nole to MAS* Added "FOR INFORMATION ONLY"* General Revision Figure 2-6
* Added Bypass switch pole to MAS* Added "FOR INFORMATION ONLY" 2.2 Clarifications and editorial changes 2.3.1 2.3.2 Editorial changes 2.3.3 (was 2.3.6) Moved 2.3.6 to 2.3.3 and renumbered following sections.2.3.4 (was 2.3.3)* Expanded TxB2 description per Westinghouse comments 08/28/2013
* Editorial chanoes -
PRoesisiPotectinfSytem Interface Rquerementsopecificatio Revision:
9 Page 10 of 78 Revision Affected [Reason for Revision Number Pages ________________________
2.3.4.4 (was 2.3.3.4)Updated information to be transmitted by TxB2 9, cont.2.3.4.5 Added requirement for identical TxB1 and TxB2 data streams 2.3.5 (was 2.3.4)Edtrachne 2.3.6 (was 2.3.5)Edtrachne 2.3.6 (was 2.3.6) Moved 2.3.6 to 2.3.3 2.3.6.4 Added requirement for identical TxB1 and TxB2 data streams 2.3.7 Editorial changes and clarifications 2.3.7.1 KVM switch is PG&E scope; clarified "shall' vs. "will" 2.4 2.4.2 Clarifications per Westinghouse comments 08/28/2013 2.4.3 2.6.1.1 Deleted drawing reference; subject to detailed design 2.7.1.1 2.7.1.2 Clarifications per Westinghouse comments 08/28/2013 2.7.1.3 2.7.2 Separated requirements
*Expanded ASU function description per Westinghouse comments 08/28/2013 2.7.2.4 Clarifications; also changed 'instrument channel" to "channel" 2.7.2.9 Added requirement to to modify adjustable parameters 2.7.2.10 Parameters may be changed only via TAB with TAB connected 2.7.2.11 Expanded functions to support surveillance testing 2.7.2.12 Added requirement for ASU software to run under MSWindows OS 2.7.2.13 Added requirement for printing capability 2.8.1 Clarifications per Westinghouse comments 08/28/2013
* Numbered section to facilitate tracking 2.8.1.1
* Added requirement to suppress power supply failure alarms if DI card has lost power.2.8.2 Clarifications per Westinghouse comments 08/28/2013 2.8.2.3 -Added requirement for Tricon Dl card power supply failure* Added requirement to suppress Tricon power supply failure alarms if Dl card 2.8.2.4has lost power.2.8.3
* Clarifications per Westinghouse comments 08/28/2013
* Changed "instrument channel" to "channel" various places Rewrote sections:* Clarified ALS channel in bypass is not an alarm; it is a discrete output to be wired per the detailed design.* Clarified Bypass contacts activate if a channel is bypassed from the ASU or 2.8.3.1 -the manual bypass switch 2.8.3.4 -Added LSM current sense requirements
* Added conditions to defeat RTD failure alarm input* Clarified ALS Channel in Bypass clears if no other signals in ALS chassis require it to be active______________
Deleted 2.8.3.4 ____________________
2.8.4 Clarifications per Westinghouse comments 08/28/2013 2.8.4.2 Added ALS Chassis 00S alarm.2.8.6 Deleted Tricon TTD Energize to Trip requirement 
-Refer to FRS.3.2.1 1.5 2.8.7 Added alarm time delay per PG&E request 2.8.7.3 -Added new item 11, Loss of power to Dl card alarm 2.9.1 Deleted Tricon Tagname length requirements; to be incorporated by Invensys______________
into Tricon Coding Guidelines document 2.9.2 Deleted Tricon Modbus alias requirements; to be incorporated by Invensys into Tricon Codina Guidelines document PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 11 of 78 Revision [Affected 1 Reason for Revision Number [Pages __________________________
2.9.3.1 Deleted Tricon Tagname requirements; to be incorporated by Invensys into Tricon Codina Guidelines document 9, cont.2.9.3.2 Clarifications per Westinghouse comments 2.9.4 Deleted Tricon disallowed function block Names* Deleted Table 2 2.9.5 Removed Table 4, Tricon quality code 5 requirements; to be incorporated by 2.9.5Invensys into Tricon Coding Guidelines document 2.9..1 Editorial change* Numbered to facilitate tracking 2.9.5.2 Added new items 2-6 per PG&E comment.2.9.6 various Changed "instrument channel" to "channel" Clarified removal of a channel from service shall not affect ability of other 2.9.6.5 channels in the same chassis that have not been removed from service to initiate a safety function 2.9.6.6 (various)
Editorial change (Manual switches)2.9.6.6.3.c.(3).(c)
Deleted Tricon bistable test requirement from project scope 2.9.6.6.3.c.(3).(d)
Deletion requested by PG&E 2.9.6.6.3.g Changed "an instrument channel bistable" to "a bistable" 2.9.6.6.3.h 2.9.6.6.3.h(1)
* Changed "an instrument channel bistable" to "a bistable" 2.9.6.6.3.h(2)
* Clarified P-13 bypass logic 2.9.6.6.3.h(3) 2.9.66.3.
* Changed "an instrument channel bistable" to "a bistable"* Clarified logic 2.9 .6 .6.34 2.9.6.6.3.k Added/clarified alarm suppression requirements 2.9.6.6.3.1 2.9.6.6.7 Added Tricon MAS outputs testability requirements 2.9.6.7 Expanded description per Westinghouse comments 08/28/2013 2.9.6.7.10 2.9.6.7.12 Deleted 2.9.6.7.13 2.9.6.7.11 Added suppression criteria 2.9.6.7.14 2.9.6.7.15 Added requirements 2.9.6.7.16
* Updated maintenance tagnames per PG&E request 2.9.7
* Updated Tricon alarm time delay requirements
* Changed '""Bistable Comparators" to "Comparators" 3.0 Added new Section PPS Cyber Security Requirements 3.1* Added SDOE requirement;
* Clarified RG 1.152 Rev 3 applies to safety-related software only 3.2 Clarified scope 3.2.2 Clarified access enforcement and allowed actions 3.2.3 Clarified system use notification 3.2.4 [Clarified password requirements 3.2.5 [Clarified system hardening 3.2.6 [Clarified automatic login on MWS startup 4.0 4.0 Renumbered I/O List appendices and all references to them.
Process Protection System Interface Requirements Specification Revision:
9 Page 12 of 78 Reviion Affeted Reason for Revision Number Pages* Added Triconex wetting supply failure DI requested by PG&E e Deleted Triconex Time Synchronization discrete input all sets* Rearranged Tricon wide range RCS temperature inputs for constructability (Sets 1, II only)* Updated PPS Ill Tricon Channel OOS Alarm PK0607* Updated Tricon Set Ill Dl wetting voltages Appedix .1 Deleted Tricon TC-454B PZR Vapor Space Temperature (Set IV only)Appendix 4.2
* Deleted output supervision for energize to actuate ALS PORV discrete Appendix 4.3 Appendix 4.4 outputs* Revised ALS power supply tagnames and descriptions for 9, cont. (was constructability and to agree with SDS 6116-00011 Rev I Appendix 3.1
* Upgraded RCS flow analog output to Class IA (Sets 1, 11, 1I)Appendix 3.2
* Moved Loop 4 WR Pressure High to RHR Not Isolated (Sets Ill, IV Appendix 3.3 Only) from RRXM Ch 3 to RRXM Ch 2 Appendix 3.4)
* Updated reference drawings* Deleted ALS Containment Pressure Channel in Test alarm; replaced with PPS Out of Service (OOS) Alarm* Deleted Gateway tagnames per PG&E requestRevised cells are identified by font color and date.* Deleted Notes 4, 6, and 8* Changes are color coded red Process Protection System Revision:
9 Interface Requirements Specification Page 13 of 78 Contents 1 INTRODUCTION..........................................................................................................
15 1.1 PURPOSE.........................................................................................................................15 1.2 SCOPE ...........................................................................................................................
15 1.3 DEFINITIONSANDACRONYMS 
...................................................................................................
15 1.4 REFERENCED DOCUMENTS.....................................................................................................
18 1.5 IDENTIFICATION..................................................................................................................
19 2 INTERFACE REQUIREMENTS.........................................................................................
50 2.1 PROCESS INTERFACE REQUIREMENTS.........................................................................................
50 2.2 SAFETY-RELATED ALS/TRICON INTERFACE REQUIREMENTS.................................................................59 2.3 DATA COMMUNICATION INTERFACE REQUIREMENTS..........................................................................
59 2.4 SYSTEM POWER SUPPLY .......................................................................................................
61 2.5 INSTRUMENT POWER SUPPLY LOCATIONS 
....................................................................................
62 2.6 SYSTEM POWER SOURCES PROVIDED BY PG&E .......................................................................
62 2.7 WORKSTATIONS.................................................................................................................
62 2.8 ALARM INTERFACE REQUIREMENTS............................................................................
i................63 2.9 SOFTWARE CONSTRAINTS AND REQUIREMENTS 
..............................................................................
67 3 PPS CYBERSECURITY 
................................................................................................
74 3.1 SECURE DEVELOPMENT AND OPERATING ENVIRONMENT 
....................................................................
74 3.2 TECHNICAL CONTROLS...................... 
....................................................................................
74 4 APPENDICES 
............................................................................................................
78 4.1 PROTECTION SET I/O LIST ..........................................
'..........................................................
78 4.2 PROTECTION SET II I/O LIST ...................................................................................................
78 4.3 PROTECTION SET Ill I/O LIST ..................................................................................................
78 4.4 PROTECTION SET IV I/O LIST... ..................................................................................................
78 TABLES Table 1 TagnameConvention 
..............................................................................................
68 Table 2 Deleted..............................................................................................................
68 Table 3 Quality Code Assignment 
.........................................................................................
69 Table 4 Deleted..............................................................................................................
69 Process Protection System Revision:
9 Interface Requirements Specification Page 14 of 78 Figures Figure 1-1 ALS Diversity Architecture Concept .......................... 
.....................................
21 Figure 1-2 Repl1acement PPS Architecture 
-Set I AL S-A................................................................
25 Figure 1-3 Repl1acement PPS Architecture 
-Set IALS-B and Isolation Devices.......................................
26 Figure 1-4 Repl1acement PPS Architecture 
-Set I aft-Related Tricon Main Chassis...............................
28 Figure 1-5 Repl1acement PPS Architecture 
-Set ISafety-Related Tricon Primary RXM Chassis.....................
29 Figure 1-6 Rep3lacement PPS Architecture 
-Set INon-Safety-Related Tricon Remote RXM Chassis...............
30 Figure 1-7 Replacement PPS Architecture 
-Set IIALS-A ...............................................................
31 Figure 1-8 Repl1acement PPS Architecture 
-Set IIALS-B and Isolation Devices ......................................
32 Figure 1-9 Replacement P.PS Architecture 
-Set II Safety-Related Tricon Main Chassis..............................
34 Figure 1-10 Replacement PPS Architecture 
-Set II Safety-Related Tricon Primary RXM Chassis....................
35 Figure 1-11 Replacement PPS Architecture 
-Set II Non-Safety-Related Tricon Chassis...............................
36 Figure 1-12 Repl1acement PPS Architecture 
-Set Ill ALS-A ..............................................................
37 Figure 1-13 Repl1acement PPS Architecture 
-Set Ill ALS-B and Isolation Devices .....................................
38 Figure 1-14 Repl1acement PPS Architecture 
-Set Ill Safety-Related Tricon Main Chassis .............................
40 Figure 1-15 Repl[acement PPS Architecture 
-Set Ill Safety-Related Tricon Primary RXM Chassis ...................
41 Figure 1-16 Rep)lacement PP5 Architecture 
-Set Ill Non-Safety-Related Tricon Chassis..............................
42 Figure 1-17 Rep)lacement PPS Architecture 
-Set IV ALS-A ..............................................................
43 Figure 1-18 Rep3lacement PPS Architecture 
-Set IV ALS-B and Isolation Devices .....................................
44 Figure 1-19 Rep)lacement PPS Architecture 
-Set IV Safety-Related Tricon Main Chassis.............................
46 Figure 1-20 Rep)lacement PPS Architecture 
-Set IV Safety-Related Tricon Primary RXM Chassis ...................
47 Figure 1-21 Rep)lacement 225 Architecture 
-Set IV Non-Safety-Related Tricon Chassis .............................
48 Figure 1-22 Replacement 225 Non-Safety-Related Communications Architecture 
.....................................
49 Figure 2-1 LSM Functions 
............................................-.......................................................
53 Figure 2-2 Typical ALS Analog Input Wiring ..........................
i.....................................................
54 Figure 2-3 Typical Tricon Analog Input Wiring.............................................................................
55 Figure 2-4 Tricon/ALS PT-455 Interface Wiring ...........................................................................
56 Figure 2-5 ALS-A and ALS-B 5525 Connections (Deenergize to Trip Configuration).................................
57 Figure 2-6 ALS-A and ALS-B SSPS Connections (Energize to Trip Configuration)....................................
58 Figure 2-7 Typical TAB Communication Link Connection 
................................................................ 
: 66.
Process Protection System Interface Requirements Specification Revision:
9 Page 15 of 78.1 Introduction 1.1 1.2 1.3 1.3.1 Purpose This document specifies the requirements imposed on the Process Protection System (PPS), its subsystems, and other system components to achieve interfaces among these entities that are required for the PPS to perform its design function.This document is intended to be revised as the PPS replacement design progresses.
Scope The PPS comprises Tricon equipment provided by Invensys/Triconex and Advanced Logic System (ALS) equipment provided by Westinghouse, LLC. This Interface Requirement Specification (IRS) provides: 
(1) requirements for the interfaces between external field devices such as process transmitters and the Tricon and the ALS; (2) electrical and communication interfaces between the Tricon and ALS and their associated peripheral devices; and (3) other interfacing Diablo Canyon Power Plant (DCPP) systems such as the Solid State Protection System (SSPS), Plant Process Computer (PPC), Main Annunciator System (MAS), Safety Parameter Display System (SPDS) and the Safety-Related 120 Vac and 125 Vdc Power Systems.All external interface requirements for each of these systems will be defined.Definitions and Acronyms Definitions The following definitions are used in this document: TERM DEFINITION Channel An arrangement of components, modules, and software as required to generate a single protective action signal when required by a generating station condition.
A channel loses its_________________identity where single action signals are combined.Defeat Place a channel or function in an as-is condition.
Electrical Class 1E Design Class I electrical systems, components and equipment[1.4.4.9]
perform safety-related functions.
Instrument Class IA and lB Category 1 devices below are considered to serve Class 1 E functions.
All other instrument classes are considered to serve non-Class 1 E functions.
Instrument Class IA Instrument Class IA instruments and controls are those that[1 .4.4.6] initiate and maintain safe shutdown of the reactor, mitigate the consequences of an accident, or prevent exceeding 10 CFR____ ___ ____ ___ 100 [1.4.5.2]
off-site dose limits.Instrument Class lB Instrument Class lB instruments and c~ontrols are those th~at[1.4.4.6] -are required for post-accident monitoring of Category 1 and 2 variables in accordance with Regulatory Guide 1.97, Revision 3 [1.4.3.2].
Instrument Class IC Instrument Class IC instruments and controls have the[1.4.4.6]
passive function of maintaining the pressure boundary integrity of PG&E Design Class I piping systems.Instrument Class ID Instrument Class ID instruments and controls are components
[1:4.4.6]
that have certain Design Class I attributes, but do not require conformance with all Class IA, IB, or IC requirements.
Process Protection System Interface Requirements Specification Revision:
9 Page 16 of 78 TERM DEFINITION. 
.... .Instrument Class II Instrument Class II components are Design Class II devices[1.4.4.6]
with non-safety-related functions.
However, certain Class II components are subjected to some graded quality assurance requirements.
May A termh used to denote permission to perform activities and is neither a requirement nor a recommendation.
Out of Service An intentional inoperable condition established for a protection channel that prevents an unexpected interaction with other plant systems during maintenance activities.
For protection system channels that include comparator outputs, the OOS condition is established when a comparator output from the PPS instrumentation is forced to a fixed state by plant personnel via the MWS.For the purpose of this definition, manual trip and manual bypass switches are external components and are not considered part of the PPS instrumentation.
Partial Trip A condition where the SSPS input relay is in the tripped/actuated state.*For a Deenergize to Trip system output, the input relay state is False (0)* For an Energize to Trip system output, the input relay state is True (1)Protection Set The physical grouping of process channels with the same channel designation.
Each of the four redundant protection sets is provided with a separate and independent power feed and process instrumentation transmitters.
Thus, each of the four redundant protection sets is physically and electrically
_________________independent from the other sets.Shall A term used to denote a legally binding (i.e., contractual)
_________________
requirement.
Should A term used to denote recommendations that are desirable, but not contractual requirements.
Test in Bypass A maintenance condition in which the system output is maintained in the non-actuated condition.
* For a Deenergize to Trip system output, the output is maintained in a True (1) state* For an Energize to Trip system output, the output is_________________
maintained in a False (0) state Test in Trip A maintenance condition in which the system output is maintained in the actuated condition.
* For a Dee~nergi~z to Trip svs~tem output, the. output is maintained in a False (0) state a For an Energize to Trip system output, the output is______________
I maintained in a True (1) state Will A term used to denote intention or certainty; not a legally_________________binding (i.e., not contractual) requirement.
Process Protection System Interface Requirements Specification Revision:
9 Page 17 of 78 1.3.2 Acronyms ACRONYM DEFINITION ALS Advanced Logic System AMSAC ATWS Mitigation System Actuation Circuitry ASU ALS Service Unit ATWS Anticipated Transient Without Scram CDD Conceptual Design Document CLB Core Logic Board COM Communications Board DCM Design Criteria Memorandum DDE Dynamic Data Exchange DCPP Diablo Canyon Power Plant DFWCS Digital Feedwater Control System FRS Functional Requirements Specification HMI Human Machine Interface I&C Instrumentation and Controls IEEE Institute of Electrical and Electronic Engineers I/O Input/Output Deleted Deleted IRS Interface Requirements Specification KVM Keyboard, Video display, and Mouse HMI peripheral devices LLC Limited Liability Corporation MAS Main Annunciator System MCR Main Control Room NOEL Nuclear Qualified Equipment List NR Narrow Range NRC (USNRC) (United States) Nuclear Regulatory Commission Deleted Deleted OPDT Overpower Delta T OTDT Overtemperature Delta T PG&E (PGE) Pacific Gas & Electric Company PCS Process Control System PLC Programmable Logic Controller I I l -lI I11. I ILUbOOO I..JUI ljU 1.I PPS Process Protection System PRXM Primary Remote Expansion Module Deleted Deleted RCS Reactor Cooling System RNARA Auxiliary Relay Rack A RNASA Auxiliary Safeguards Rack A Process Protection System Interface Requirements Specification Revision:
9 Page 18 of 78 ACRONYM " DEFINITION 
: RNPxy PPS Racks X = 1-4 (Protection Sets I -IV)Y =A, B, C, D, E (Protection Sets I, II)Y= A, B, C (Protection Sets Ill, IV)RNSIA/RNSIB SSPS Input Relay Cabinet Train A/Train B RRXM Remote RXM RTD Resistance Temperature Detector RXM Remote Expansion Module RVLIS Reactor Vessel Level Indication System SCM Software Configuration Management SDOE Secure Development and Operating Environment SPDS Safety Parameter Display System SRS Software Requirements Specification SSPS Solid State.Protection System STB (ALS) Service and Test Board TOM Triconex Communication Module TMR Triple Modular Redundant TSAP TriStation 1131 Application Project WR Wide Range 1.4 Referenced Documents 1.4.1 General References and Standards The following codes, standards, and regulations referenced in this Section are totally or partially applicable to the activities covered by this Specification:
1.4.2 Institute of Electrical and Electronics Engineers (IEEE)1.4.2.1 IEEE Standard 279-1971, "Criteria for Protection Systems for Nuclear Power Generating Stations" 1.4.2.2 IEEE Standard 603-1991, "LEEE Standard Criteria for SafetySystems for Nuclear Power Generating Stations" 1.4.3 United States Nuclear Regulatory Commission (USNRC) Regulatory Guides 1.4.3.1 Regulatory Guide 1.75, Rev. 2, "Physical Independence of Electric Systems" 1.4.3.2 Regulatory Guide 1.97, Rev. 3, "Instrumentation for Light-Water-Cooled Nudiear P~wer Plants to Assess Piant and Environs Conditions During and -Following an Accident" 1.4.3.3 Regulatory Guide 1.180, Rev. 1, 'Guidelines for Evaluating Electromagnetic and Radio-Frequency Interference in Safety-Related Instrumentation and Control Systems" 1.4.3.4 U.S. Nuclear Regulatory Commission, Digital Instrumentation and Controls, Revision 1, "DI&C-ISG-04, Task Working Group #-4: Highly-Integrated Control Rooms -Communications Issues (HICRc)," March 6, 2009 (ADAMS Accession No.ML08331 0185)
Process Protection System Revision:
9 Interface Requirements Specification Page 19 of 78 1.4.3.5 Regulatory Guide 1.152, Rev 3, Criteria for Use of Computers in Safety Systems of Nuclear Power Plants 1.4.4 Implementing Documents 1.4.4.1 Process Protection System Replacement Conceptual Design Document (CDD)1.4.4.2 Process Protection System Replacement Functional Requirements Specification (FRS)1.4.4.3 Process Protection System Replacement System Software Requirements Specification (SRS)1.4.4.4 Deleted 1.4.4.5 DCM S-38A, Plant Protection System 1.4.4.6 DCM T-24, DCPP Instrumentation and Controls 1.4.4.7 DCM S-65, 120 VAC System 1.4.4.8 STP 1-33, Reactor Trip Time Test Program 1.4.4.9 DCM T-19, Electrical Separation and Isolation 1.4.5 Other References 1.4.5.1 Triconex Corporation Nuclear Qualified Equipment List (NQEL), latest version 1.4.5.2 Title 10 Code of Federal Regulations Part 100, Reactor Site Criteria 1.4.5.3 Letter No. NRC-V1 0-09-01, J. Polcyn (Invensys) to NRC, "Nuclear Safety-Related Qualification of the Tricon TMR Programmable Logic Controller (PLC) -Update to Qualification Summary Report Submittal and "Application for withholding Proprietary Information from Public Disclosure," dated September 9, 2009 1.4.5.4 Diablo Canyon Power Plant, Unit Nos. 1 and 2 -Safety Evaluation for Topical.Report, "Process Protection System Replacement Diversity 
& Defense-In-Depth Assessment" (TAC Nos. ME4094 and ME4095), dated April 19, 2011 (ADAMS Accession No. ML110480845) 1.4.5.5 6002-00301, ALS Topical Report and Supporting Documents Submittal, July 29, 2010 (ADAMS Accession No. ML102160471) 1.4.5.6 6002-32102, ALS 321 Design Specification 1.4.5.7 9700052-019, Field Terminations Guide for Tricon v9-1 0 Systems 1.4.5.8 6116-00011, DCPP ALS System Design Specification 1.4.5.9 6116-00100, ALS-ASU Communications Protocol 1-.4.5.10 600)2-00011, ALS Platform specification 1.4.5.11 NEI-08-09, Cyber Security Plan for Nuclear Power Reactors, Rev 6 1.5 Identification This section identifies the systems, interfacing entities, and other interfaces to which this document applies.
Process Protection System Revision:
9 Interface Requirements Specification Page 20 of 78 1.5.1 Protection Sets The PPS consists of sixteen (16) racks (per DCPP Unit) of instrumentation located in the Cable Spreading Rooms (Auxiliary Building, elevation 128). The sixteen racks are divided into four Protection Sets; five racks each for Protection Sets I and II, three racks each for Protection Sets ill and IV. Each Protection Set is physically separated and electrically isolated from the other sets.Protection Set I consists of Racks 1 thru 5 (RNP1A, RNP1B, RNP1C, RNP1D, and RNP1E).
Set II consists of Racks 6 thru 10 (RNP2A, RNP2B, RNP2C, RNP2D, and RNP2E).Protection Set III consists of Racks 11 thru 13 (RNP3A, RNP3B, and RNP3C).Protection Set IV consists ofRacks 14 thru 16 (RNP4A, RNP4B, and RNP4C).Physical equipment will be assigned to specific PPS racks during detailed design.The existing Eagle 21 HMI units are located in Racks 5 (RNP1E), 9 (RNP2D), 12 (RNP3B) and 14 (RNP4A). These racks are expected to house the replacement PPS Maintenance Workstation and communications equipment.
1.5.2 Triconex Tricon Programmable Logic Controllers (PLC)The Tricon PLC shown in the following figures is composed of the Main Chassis and two Remote Expansion Chassis (RXMs), all within a given protection set. The Main Chassis is connected to a "Primary" RXM via triplicated copper I/O expansion bus cables. The Primary RXM (PRXM) is connected to a "Remote" RXM chassis using multimode fiber-optic cables. The Remote RXM (RRXM) chassis allows extending the I/O bus over longer distances than copper cables can support, and to provide electrical isolation for non-safety-related I/O signals, as required.Refer to the Triconex licensing Topical Report [1.4.5.3]
for additional information.
1.5.3 Westinghouse Advanced LogicSystem (ALS)1.5.3.1 A typical ALS rack configuration as shown in the following figures contains two sets of the following components (See Reference 1.4.5.5 for additional details): ALS-1 02 -Core Logic Board (CLB)ALS-302 -Digital Input Board ALS-31 1 -Analog Input Board (Temperature)
ALS-321 -Analog Input Board ALS-402 -Digital Output Board ALS-421 -Analog Output Board 1.5.3.2 ALS Service Unit (ASU)Th ASU is a dedicatedsoftware application that is-installed on tlhe-ALS Maintenance Workstation (MWS) described in Section 1.5.6 and shown in Figure 1-22. The ASU application is connected to the ALS during maintenance or testing by plant personnel.
The ASU application provides non-intrusive diagnostic tools that allow plant personnel to access detailed status and configuration information of the system while the system is online.The ASU application also provides post-event analysis information about the system to plant personnel for evaluation of an event after it has occurred.The ASU application may be used to modify setpoints and tuning constants, but shall not be capable of altering functional programming (i.e., alter the Process Protection System Interface Requirements Specification Revision:
9 Page 21 of 78 algorithm) of the CLB.1.5.3.3 The ALS A and ALS B Conceptual architecture, which provides built-in diversity and defense in depth per the D3 evaluation approved by NRC[1.4.5.4], is illustrated in Figure 1-1. Wiring details are illustrated In Figure 2-5 and Figure 2-6.The manual bypass switches in Figure 1-1 allow one ALS diversity Group (i.e., ALS-A or ALS-B) to be bypassed and removed from service without tripping the channel. The manual trip switch may be used to initiate a partial channel trip independently of the ALS logic.Figure 1-1 ALS Diversity Architecture Concept De-energize to Trip Configuration Energize to Trip Configuration Note: Manual Trip switch as required by detailed design 1.5.4 Isolation Devices 1.5.4.1 The isolation devices shown in Figure 1-3, Figure 1-8, Figure 1-13, and Figure1-18are safety-related components providedby Westinghouse...
1.5.4.2 The isolation devices are separate and independent from both the Tricon and the ALS.1.5.4.3 All isolation devices are 4-20 mA DC input and 4-20 mA DC output.1.5.4.4 The qualified isolation devices shall perform the required isolation function when powered from non-safety-related I/O power. That is, credible faults (short circuit, open circuit, application of fault potential) on the Class II terminals will not adversely affect the Class I circuit.
Process Protection System Revision:
9 Interface Requirements Specification Page 22 of 78 1.5.5 ALS Signal Conditioning 1.5.5.1 The ALS shall provide signal conditioning and isolation for the Reactor Coolant System (RCS) non-safety-related flow analog output signals 1.5.5.2 The ALS shall provide capability to normalize the RCS Flow scaling periodically by adjusting the gain and offset (i.e., mex+b) from within the ALS application via the ASU.1.5.5.3 The ALS shall provide signal conditioning for the RCS narrow range Resistance Temperature Detector (RTD) safety-related signals to the Overpower Delta Temperature (OPDT) and Overtemperature Delta T (OTDT) reactor trip functions, and the RCS Wide Range Temperature and Pressurizer Vapor Space Temperature RTD signals.1. The ALS shall convert the RTD signals from resistance to temperature.
: 2. The ALS shall provide the capability to update the resistance to temperature conversion coefficients (i.e., a, b, and c) periodically.
: 3. Analog temperature signal input range information is provided in the following FRS Sections: a) 3.2.3.9 (WR Hot Leg and Cold Leg Temperatures), b) 3.2.5.9 (Tavg, AT, OPDT Setpoint, OTDT Setpoint), and c) 3.2.8.9 (PZR Vapor Temp).1.5.5.4 Temperatures shall be transmitted from the ALS to the Tricon via safety-related 4-20 mA analog signals scaled as follows: 1. Narrow Range Tcold: 510 -630 deg F [FRS 3.2.5.9.1]
: 2. Narrow Range Thot: 530- 650 deg F [FRS 3.2.5.9.1]
: 3. Wide Range Thot: 0 to 700 0 F [FRS 3.2.3.9.3.a]
: 4. Wide Range Tcold: 0 to 700 0 F [FRS 3.2.9.3.b]
: 5. Pressurizer Vapor Temperature:
100 to 700 0 F [ERS 3.2.8.9.3.a]
: 6. The Tricon shall provide an mx+b filter on the 4-20 mA input signals per FRS 3.2.1.14.3.
1.5.5.5 If the actual temperature is below the low scale output value defined in Section 1.5.5.4 the ALS shall output the low scale value, or 0% of span=4.00 mA without initiating an Out of Range Low alarm.1.5.5.6 The ALS shall provide down-scale open RTD protection; that is, if the ALS detects an open or shorted RTD, it shall output a 0.0 mA analog signal.1.5.5.7 All temperatures shall be transmitted from the ALS to the Gateway computer via RS-422 signals scaled for the qualified range of the RTD input board.1_5.5_8. This-aiiows the-Tricon to-provide RTD-faiiure aiarming-and-ensures that the , Tricon does not indicate RTD failure when the temperature is below low scale but still functioning correctly, a condition that exists during plant shutdown 1'.5.5.9 In the latter case, the actual temperature is available from the ALS via the Gateway computer via the TxB1 data stream.1.5.5.10 Analog output signals shall fail low, if possible, upon detection of critical failure.
Process Protection System Revision:
9 Interface Requirements Specification Page 23 of 78 1.5.6 Maintenance Workstation 1.5.6.1 Separate and independent Maintenance Workstation computers 
[Section 2.7]shown in Figure 1-22 are provided for the Tricon and ALS subsystems, respectively, for each Protection Set to allow PPS informatiOn processing and display. The two MWS computers in each Protection Set share common HMI peripheral devices such as the keyboard, video display, mouse (KVM), and touchscreen interface through a KVM switch [Section 2.3.7].1.5.6.2 The Tricon will be isolated from its dedicated Maintenance Workstation computer by the qualified safety-related Triconex Communications Module (TOM). Fiber optic cable electrically isolates the Tricon from external non-safety-related devices.1.5.6.3 The ALS broadcasts data to its dedicated Maintenance Workstation computer via the isolated one-way TxB2 RS-422 data links. TAB communications between the ALS and the MWS takes place via RS-485 data link. The TAB is physically disconnected from the MWS when the TAB is not in use. The TAB is connected and enabled only when maintenance is being performed on the ALS. It is disconnected at all other times. The TAB is enabled for short periods only when ALS maintenance is being performed, and maintenance will be performed under administrative controls by qualified individuals.
This arrangement satisfies NRC DI&C ISG-04, Staff Position 10 of Section 1, Interdivisional Communications 
[1.4.3.4].
1.5.6.4 A Maintenance' Workstation computer may access data only within its own protection set subsystem (i.e., Tricon or ALS). Communication with other protection sets or between subsystems within a Protection Set shall not be possible.1.5.7 Plant Process Computer Gateway and Other Non-,Safety-Related Communications Interfaces 1.5.7.1 The safety-related Tricon and ALS are connected to the non-safety-related PPC and workstation via the Gateway computer shown in Figure 1-22. The Gateway computer will be installed by PG&E in the Process Control `system (PCS) replacement project. The ALS-1 02 CLB provides isolation for the TxB1 and TxB2 one-way EIA-422 communication links to the PPC Gateway and the Maintenance Workstation, respectively.
The ALS transmits data to the non-safety-related Gateway computer, which is common to all four protection sets, and to the Maintenance Workstation using serial, unidirectional, one-way communications channels that do not require any handshaking.
1.5.7.2 The Tricon will be isolated from the Gateway computer by a data isolation device such as the port aggregator network tap shown in Figure 1-22, which permits two-way communications between the Maintenance Workstation belonging to a specific protection set and the Tricon in that protection set, yetvy ev n I--U- L V %.c4L.VVay I IjJULL .:I I IE port aggregator tap will be provided by PG&E.1.5.7.3 For system health displays, the PPS will share a HMI unit in the Control Room on CC4 that will also be installed by the Process Control System (PCS) replacement project.1.5.8 Response Time The reactor trip response time is the time interval from when the monitored parameter exceeds its trip setpoint at the channel sensor, until loss of control rod Process Protection System Revision:
9 Interface Requirements Specification Page 24 of 78 stationary gripper coil voltage. The ESF response time is the time interval from when the monitored parameter exceeds its trip setpoint until the ESF equipment is capable of performing its safety function.
The PPS is allocated a maximum response time of 0.409 seconds [1 .4.4.8].1.5.8.1 The ALS performs signal conditioning for the narrow range RTD's that support the Overtemperature AT (OTOT) and Overpower AT (OPDT) reactor trips, and the Tricon performs setpoint calculation and comparison and trip output. Therefore, the PPS time response allocation is shared between the ALS and Tricon portions of the PPS for these functions.
1.5.8.2 The preliminary worst case (deterministic)
OTDT and OPDT PPS response time allocations shall be as follows: ALS: "0.175 seconds for RTD processing Tricon: 0.200 seconds Contingency:
0.034 seconds Total PPS Allocation:
0.409 seconds 1.5.8.3 The vendor shall provide means of verifying the actual response time if the system does not support deterministic methods of calculating worst case response time characteristics.
1.5.9 Accuracy The FRS specifies existing Eagle 21 accuracy requirements with the intent to maintain currently licensed Channel Statistical Allowance (CSA) margins such that no setpoint changes are required.
Accuracy allocation between the ALS and Tricon for the RCS temperature parameters will be determined during the detailed design.
Process Protection System Interface Requirements Specification Revision:
9 Page 25 of 78 Figure 1-2 Replacement PPS Architecture 
-Set I ALS-A PPS Protection Set I RS-4,53 TAB Data Link Discnnected when not in ua AIl 'W~orstotion/ASUJ 03-422 Data Link TXBI TX Only PP3 Gateway RS-422 Data Link TX32 I TX Only 82= Wor-station till it (SZ FT..424 (33) PFT434 (54) P1-444 TE-4IOB TS-410A Loapt 303 Flaw (4-20 mA)Loop 2 R03 Flaw (4-20 twA) -=tony 3 ROD Flow Loop 4 ROD Plow (4-20 erA) 1 Loop)1 DTA Tc~ld-t (220o -)Leapt O TitA Tnt-IA (2(203)Loop I DITA Thot-Ok TE-412A Loop 1 hot-3A (22O 3).... LooplIWR Temptlot Leg ALS-A.......(2003Q)TE-413B Loop 1 WRTetnp Celd Log PZR ProssunePT-455(42mA FC-4t4.A LoopI Low Flow RxTrip (Disoreta) r FD0B424A Loop 2 Low Plow Sn Tri FC-434 A Loap 3 Law Plow Rnx Trip (Olanrete)
PFD44_A Laop 4LoW Flow RxTrip (Discrete)
TE-413A L~oop I Hat Leg Temp (4-20 mA)*TB-4t3B LOop)t Cold Leg Temp (4-2o mA)TE-410B Loop)t DT'A Tnald-I (4-20 mA)TB-410A Leapt1 DTCA"rnet-tA 
, (4-20 mA)TE-4IIA Loop I DSPA Thnt-2A (4-20 mA) 1 TE-412A Lonp I DTTA ThoI-O3A (4-20 twA)PC-4B3AA PZR Pressune Sigh Bo Trip (Dienrete)
P0-455B AtUnblook SI, P11i (Discrter)
P0-4553_A PZ3 Pressura Low RXt Trip (Diacnete) p0-4550_A P0R Presaune Low-Low StI (Diacnete) l p0-9378_A Cent Prss Highr-Hgh Clint Dpray. PB B Ilan (Diacretn)
P0-433E A P03 Pressura H-gh -PORVe (Discrare)
FM-414B So Contant Flow Loop I (4-20 mA)*PM-424B RooCoolant FlowLoop 2 (4-20 erA)SePS SSPS 3SPS BSPS PS I Trioon PSI Tdcooo PS I Td Poon PSI Trisn PS) Trbcon BPS Tin SOPS 3BPS BPSP IDOL IDO ()6) PT-SB7 FO-414 FBLSMA FO-424FB LSMA FC-434FBLSM A (4-20 mA)PC -,14 Lone I Low Pln LSMA (Discrete)
PF-424 Loop 2 Low Plow LSMA .(Discrete)
FC-434 Loop 3 Low PRn 131A (Dsacrete)
FC-444 Loop4 Low PlowLS3M4A
--_ -_o.,_ (Discrete) 
-P0-4510 P0.3 Pressura High LSM A P0-4SSPBLDMA(Disocete)
P0-4558 Ucblook St. P11 LBSM A P0-4DBPRDMA(Discrete)
P0-4550 P03 Presuren Low LSM A PC-4S5C FB LBM (Dsree (Discrete)
PCC-4DP53msFBr LghMD3VLl4A p0-455_FBLSMA (Discrete)
P0-9378 Cent Paess Pight-High Olm) Spray, PhlB lain LSM A P0-5378_FBLOM A (Discrata)
A0F414 Loap 1 Law Flaw Bypasa A .PO-4)BypA(Discrete)
FC-424_ypAPF-424 Loop 2 Law Plow Bypasa A P0-42BypA(Discrete)
FO-434 Lacy S Lew PRn Bypans A PC-434_BypA (Discrete)*
P0-444 Leap 4 Leow Plow Sypaaa A F0-444 Byp A (Discrete) pO-455A P03 Pressure High Bypass A PC-45AByp A (Discrete) 
'p0-4538 Ucbsck Sl, P11 Bypass A PC-453BSpypA (Ciscreta)
PC-45C Bp AP0-4440 P03 Prescure Lore Bypass A P-3QyA(Discrete) PC-455D.BypA PO-455D P03 Pressure Low-Lnw Bypass A (Discrete 
*PC-455 Byp A P0-455E P03 Prescore High -PORVBypassA F-18yA(Discrete) 
'p0-B378 Bo A p0-3378 Clint Press High-High cent Spray. Ph B Ilan Bypass A ALD-A Chassis Fower Bupply 1 Failure (+48VA)PSSFAIL IA (Disrete SLS-AFILCha ssis PawerSupl 2 2Falture )a4VB PSO iLL- (Discrete)
/ 9 \ PS1 FlL ]A Power Supply I Fallow I PS4 FriL A -,__ '_-___ Pew c r B_____ _ F __ur _ .. .PSFXL- (Discrete)
FS2FLJAALa Contact Wesing Supply' I FaIu re PS2F, L IA(Discrete)
SSAlLIA ALS Cantact Watting Supply 2 FaillowP I TAB Status A PS I TAR Swit4h Statb,-- -(ODreeta) atI PPS IaJanCleaaA PSt...IAlaroClear t LUY-PSI D DI A PPS I Chassis A Out oflSeraice e (Discrete)
UY-PSIADIVA PPS I Chassis A Treuhle (Discrete)
U3-pSI B DIM A PPS I Chassis A Channel Bopass (Otac~eta)
UY-PSI C DIVA PPD I Chassis A Failure (Discrete)
Loop Puse A~(Discrete)
A tlit Process Protection System Interface Requirements Specification Revision:
9 Page 26 of 78 Figure 1-3 Replacement PPS Architecture 
-Set I ALS-B and Isolation Devices PPS Protection Set I RS0-485TAB Data Unit t(Diseanneeted when not in usenaorsaio/a RO-4f2Data UrleTXBi1 
~ oaaa TX Only Data Link TXB2 I TX Only 8-L2) VWetrtatlatn
+ 11 lit S(01) (4-2O rnA)(2 124Leap 2*(8:2 FT424(4-20 emA)(02) FT-434 (4-20 mA)(04) FT-444 Lee4-2 TE-41iBLepOTAel-(2200 )20-4100Loep 
&#xb6; DiTATtaet-IB (2000 )TE-4110 -Leapi1 DflATlent-2B v (2OO 0)TE-4120 Leapt1 DiTAThOt,,-3B (20)0 )iOWA ~ Laap 2WR1 Temp I-tt Leg (2OO 0)TE-423B Leap 200WR Temp Celd Leg*(2OO 0)(0(2 1-400P0R PressumePT455(4-20 mA,)(0(2 T-527Containmentf Preus (4-20 nrA)FC-414_FOLOMB FC-414 LeaptI Lat Roew LOM B (Diacete)F0-424_F0 LOMB FC-424 Leap 2 Law Flew LOM B (Ditamte)FC34_F4_LOM0 P0F-444 Lap43 Law Flew LOM B (Diserete)
FC-4500 Loopea St PitR LOMB F0-44_BPLOMB (Dirnette)
P0-00 P0R Prasut Lawh LOM B PO-455AF0LSM B (Disetete)
P0-455BP2 Puwnbeo 1 LawLwOM B pO-455DFPLSMB (Disetete) 
-P0-40EFSLOMB P0-4500 P00 Ptessure High -PORVe LOM B PC'45EFE]LSM B(Diserete)*
P0-527B Chat Pteas Hight-High Ctint Spiny. Ph B lain LOM B*P0-037B..F LOM B (Oiserete)
F0-424 Leap 2 Lew Flaw Bypaea F0-424 BypB (Disceite)*
P0-424yp ~ FP-434 LoopS2Lew Flew Bypaea B FC-444 Leap 4 Lew Flew Bypem B *FC-4A4_BypB (Diserete) pO-455A P20 Ptraemsr High Bypaaa B *PC-455A BypB (Diserete)
PC-405B Unkleak SI, Pl1 Bypass B , pO-4500 ypB icee pcP~i --455 ne PePr stee LwByps 2 Pelr FC-45C._ypB(Disutete)
PS2PJLO PLOC4,5 Rpentautrettn Supplyw Bpassure pC-5 DBPBLI AL (eDtet rettin *upy2alr PC-455_BypB(Discretel PPC-I37BBSttuetBPr1oTA Sah-itgh Otateery hBIsaBps~(Discette)
P PO Fer CLea IB PL Casis Power Cuple ailre +8B (Diturete) r ....,i I F0-414 B Leapt 1RuLowFlow Trie (ODsuente)
FC-424,B Leap 20R' Lam Flew Trip (Dentat~e)
F-454_B LeapS 3Or Lem Flew Ttip (Disctete)
F0-444 B Trip ALS-B TB-4liB DTA Leapi1 Teald-2 (4-20 ertA) l-TE-4100 DiT'ALoepi1 That-tB (4-Ze tA)20-4110 OTlA Leapt1 Thot-2B (4-20etA)-
TE-4i20 OlTA Leapt Thato-3B (4-20artA)
TE-423A Leep 2 Hat Leg Tamp (4-20 mA)*TE-423B Leap 2 DaId Leg Temp (4-2o re,)P C-455AB PZR Prnurem High On Trip (Disaeete)
PO-.455 B_ Unhlea< SI P-it (Disremte)
P0-455C0 PB PZRFeneaw Lam R0 Trip (Diserete)
PC-455DB P00 Prenum Lew-Lew SI (Diserete) p0-007B B Ctm1 Pteea HialtHlah Pit I sle. Clan Soame -SOPS OOPS SOPS PSI ] ean PSI] Treain PS I Tdean SPS Tdn SOPS SOPS SOPS SOPS R NASA IOOL ISOL rjr (Diuctete)-
PC-455EB P00 Preaure High P0RV (Diacrate) 
*" FM-434B Leap 3 Rx Cooantt Flaw (4-ZetmA)FM-444B Leap 450 Cealent Flew A (4-2o erA),TI LUY-PSIA DIV B PPSlo hassis BTrouhle 55PIB00B (Diacume)UYP FBDVBPPS I chassis 0 Chtneelr Bypaea (wiaetete UPY-PSICO10_B PPS I Chwassi B Failue~(gleerete)
Lean Pukse B (Disctete) 
*Ak lt I"l Process Protection System Interface Requirements Specification Revision:
9 Page 27 of 78 Figure 1-3, continued'4 INDICATIONS DIRECT FROM TRANSMITT'ER INPUT LOOP Tr116n ($9) LT-359 (4-2001m) -459A VB2),4U-4590 PlOHP)Loop 1 St 11 o P1063 Triton(S 14) pT1-504 (4.201rnA)
PI-5144 d03B). P1.514B QH0P). E0FDO NVBA)T4oop50) 11-24 00001i00 P1106 p1-504A (483). p1.524B (HO P). E4FDO (NB4)Tdco ('35) P-524 (4-240 rnA)T,163n (605) p11-533 L0pO2010 10 P1-534A (183). p1-534B (1S p). ERFDO (NB4)(4-20 rnA4)Tol63 n (507) PT-543 Loop 4 Strnino P103 P-44ro) 148(OP.EPSNA (4-2o rnA)
I54 H ) RD V4 (4-;001n3) ifI 14 1+TriHco (515) P1-502 Lp str w (4-23114) 
" Trioo (5211) FT-522 Lo ~a .(4-24 rno)T2)63(1)02)
FT1.5320 op3SemI .(4-2011r4)
T2)6 (s3110) P1T-542 Lop4Seml _(4-2001mA)
T106n ($18) LT-520 -42 m) ](4-20 rA 116n11520)21T-040 Tu10in Impu Pr11r3 -.)4-22 113)11)630(65)
PT1-455 -ZRP~(4-20044)
I (4-20 rno)T11631(8($214) 
-514 (4-20 040)(4-20 ro,)4A53-A150-4048 R. Coi5n1P1owLoop 1 (4-25635)4A4-3244-4248 R& oont(32FlwA)L63 2
RX oolat4FI2L5o13)
(4-20630)(4-2011mA)
TypBcAl SIC ISO LAT)ION DEVICES, (4-20 soS)P00-522 0 Loop2Sloe,112ow (4-200100) 
-..P0M-5300200Lop 351001e86ml111w (4-20 mo4( P tC (4-2011m5)
)4-20o ( rn)- -..... ... .LM4-59010..203 Le002104 -530 N',B3) 50100M , DFW0S, AP05 (4-2003A)104-533 2 S2G3 Loool ...-.(4-208105)
PM0505_111Tur)00e410026u216P0u6 200-305-1P2R Pr4006 20t P4'R P6306314n100'1PJ11 55 P2P41 54 5E1.005 PC1.05,82H5105 (4-20 isA)2-M2-0531 PZHI044Il o p210LeooIel C 1on2[(4501, 82( 215pC (4-20is5(PM0-514_ Loop 102021001120010104 1 D3W05 (4-230105)
PM524_000Lop 252024e10,0o 1116 81141055 (4-20 mA)28M034_0 Loop 0 51oeam14ne P2000r1 ...(4-201101)
(4-20 mA)(115-433811 05 Coobot FPkW Loop 2lo 0l-4204184B)
(4-20 o34(1100-348B 1105 Cooont FIPlooolo 3 2o P2-43400V22 (4-20O m)F50-44B 1 Ho 1063811 1110 Loop (4-20o 3A 8100R 4 I I+, LP21 1111 2)0 4-IF..25.... f 1-1020055S......0 -t]i-H1-P45410105 114224005 4H-HH-H 4 t-250005 -o 1-1-HH-HH-F153210105 HF-HH-2524005 L4 1 1-] 1142800 4 1-009)Promotion Set I 005Io MAS 4 4 I I A2-53 411Q 41100110043odwhen0nt1in2u)
I6 Pr0ot )Ietl 60n Pr1 e Prot Set I HMI 415 40' R05-422 Data Link T0B2 FROT SET I(ALS 0HAS o00puter110 KV Peripheral 55-405 145 0410 0118 MAINTENANCE 
'2 SwthDevices
)660101241410116( WORKSTATION 4151 8B0 hnnt nu)] COMPUTER ALS B"Q Daa Lik 3<B2KVM Switch, HM( peripherals shown on F1igsro 1-2)
Process Protection System Interface Requirements Specification Revision:
9 Page 28 of 78 Figure 1-4 Replacement PPS Architecture 
-Set I Safety-Related Tricon Main Chassis PPS Protection Set I One-Way Td/annex 5512 I1 Data Link A[B (Tryp of 2) T P aea Data Link A PORT T P aea (T yp ot 2) ADGREDATOP Ttoonnx N5ET2 (Typ ot 2) 14 (Typ ot 2) Warkstat/on 
]i,1 I I , I 4, (55) PT-455 P 420 Pnoor DA)Prom (ALS) TE-,4f3A Loop)1 WP Tamp Hot Leg r (4-20 mAk) -Ftom (ALO) TE-412B Leapt1 WR Tenmp Cold Log i (4-20 ink) -From (ALO) TE-423A Loop 2 WP Tamp Hot Log (4-20 rAP) -From (ALS) 10-423B Loop 2 WPR Temp Cold Leg v-(4.20 oAk) -5E4A Upper Filox (0-t150) VD Lower Filux (0-1050) -O Fromn(ALS)
TE-4t00 Loop 1 DflA Toold-f -m Fmom(AL0)
TE-AttS Loop I DTTATooid-2 (4-20 ink)Fromn(AL0)
TE-4toA Loop 1 DnIA That-IA .(4.20 ink)Pram (AL0) 15-4500 Loop) 01 D 5 Thaot-tB (4-20 ink) -Pram (ALS) TE-4ttA Loop) DrA Thot-2A -m (4-20 erA) -From (ALS) TE11-55 Loop t D'n'AThot-2B (4-20e ) -From (ALO) TE-4t2A Loop)1 D&#xa3;A Thot-3A (4-2Omk)A)
From (ALO) TE-4t20 Loop)1 DtTATtrot-30 
-1 (4-20 erA) -PZR Love)(05) LT-4059 (-0ok (4-20 ink)(Ott) PT-522 Loop 2 SteamS ow -1 (4-20 mA) -($t2) PT-522 Loop 2 Steam) ow -(4-20 ink)(012) FT-532 Lop3te fow (4-20 ink)(814) PT-542 Leapt4 SW//aemPtowo (4-20 mA) -(0)4) PT-524 Loop 2 SW/lne Presor (4-20 onA) -(05 154 Loop 2 Sgrin/e Pwoess (4-20 ink) -Loop 4 SonlionFePres (057) PT-544 (42 ik/SDG Level ($)8) LT-529 420ik S/D23Level
($01) LT-539 (4-20 oak) *(80 T55 Tart/ne impulee Pressrero (020) T-SOS (4-20 -TRICON MAIN CHASSIS 1S TMr-413A Loop)I Hot Leg Templeo TR-413 (PB2) & RkLIS (PAM4) MOPR4 (4-20 mA)Thf-4t3B Loop)t Cold Leg Temp to TR-4t3 6/B2) MOP (4-20 reA)"Thf422A Loop 2 Hot Leg Tomp re TR--425 (PB2)5 PURLlS (FP514) MOP (4-20 mA)Ttffv-423B Loop 2 Cold Leo Terio to TR-422 (PB2) ...(4-20 rnA)FM-5t2D Loop) O teamosow ro PM-oft2-2 Isooltor (4-20 rnA)FM-522D Loop)t Stoarof ow to FM-022-2 Isooator (4-20 mAR)FM- Is/ FM-512_2 Loop)1 SteamS ow to FI-5)2 (P03)5 SPECFS (PB1)) O Y ~~(4-20 ink)
* MR it/( FM-522_2 Loop 2 Staamfoow to S F/-5022(VB3)S&CEFDS (P0(.0 n MOP 0B22 FM-532_2 Loop S Steam) ow to (P0I/ I53 /3)0 SPECFS (P04) MO ( "-e-j"e-BD2 I/1 FM-542_2 Loop 4 0/eaamtow to P0 Ft-S4S 6S3(5 SPECFS (P/84 MO (4-20mA
* MC FM-532D Loop)1 Steamflow to FM-522-D Iso/ator (4-20 mrA)FM-5,42 D Loop)I Steamflow to FM-542-2 Ilootator (4-20 oak)*0-10~ VDC Powered input from NIS Process Protection System Interface Requirements Specification Revision:
9 Page 29 of 78 Figure 1-5 Replacement PPS Architecture 
-Set I Safety-Related Tricon Primary RXM Chassis PPS Protection Set I LPiD DRAOOS QUFA Loop I Oh. ODDDOStSwitc (Disoote)LPITF OOS UD Loop 100000 DoSSitchr (Disoere)1455000P05 Leoel Oh. DOS Dswrth P5190050 Lop5Deeloc DSDla (Disoret)FSS2_00S LopOp 05. OOS Switch (Diessee)F532 DOSLoops2Stesrefloo Oh. OOS Switch F _OS(Distase)-
F532_OOS Loopo3 SeemeoreCh.DDOS itch (Distaste)
P~ODSLoop 4 Dtemersje rs Oh. DOS Dwitth r PSSOSDSLoo2Spa1Seamine Pre~ss Oh. DOS Dwitds pS14OOS(Disase)
P52400SLoop 3 S~ornefe Pross. Ch. DOS Doltdr P530000 (Distate)P544OOSLoop 4 Dreorline Pres.> Oh. DOO DSwitchir PD40DDS (Ditatte)DID S Level Oh. ODD Switch$20000 (Distete)LSDOSiG 3Leosi Oht OOS Swioh 1 P505_OOS TuoLine smttee Press. Oh Dos Swe~oS Loop P teohtD)si T413AOOSLoop S uR Treat ODD  T~t~tODS(Disreete)
T4330..OOS (Distete)T4230DDOO LoopO2WR "ootdOOS Switch I (Distate)(Distaste)
TO-O0DAp  (Distaeto)
TS/411G DPDT trio Dootus 1 (Disteete)
TS!41D Tosq Loo-LrewP12 Tip Status 1 (Distaete)
TS/412G Toos Ls Trio Stairs T~tAIDG(Discrete)
LS/459A PT0 Lerei Alsh Trio Stems I ISIOSPA(Disteote)
LS!529A S/G 2 Hoh-HSsh ete P14 Trp Strtus 010550(Distaste)
LS2529B OrG Dies-Leo Leosl Trio Dtotrs "- I 1535290(Distaste)
LS/539A ,SrioOHteh-Hrsh Level Pie Trip Stesatu L~riS3SA(Disteote)
LSJ539B 050 Leo-Lso Leoe Trio Solous I (Disereet) psrs505A Turbine Iroulse Piessrre Hueh P53 Trio Stairs (Distate)p ris, o1 Loop I Lor Siteline Press Trip Stetms l (Disreete)
P55140 tOoD 1 Sitrnine Pres Hieh Se~ewo Rete Tros Stems .(Disteeta) p~t24ALoop 2 Lop Orenere Free Tdp Stes )(Disotase) p52C LoopS2 Otrtlise Press HiSh a SeRts Trio Doorus P~riSS4O(Disreere)
P51534A Looo 5 LoroSpelite Press Top Smtets j (Disreors)
PS05300 Lepo3 Soupie Press Hioh Neotarve Sote Trio Sotots -I.(Distete)p&544 Loop 4LaoStateneprsessTdp Status pbe4C tp 4 Sotnes Pres Hiph Npose ~eoRte Sris Doers -.=PS2SFJL~i5 Anaslo Loop wonpu PosreSuppt Failwe Reloy I PODS O~tS(Distaste)
PS7SFAI_15 Dis1oret Loop input Forest Sueppr Failure Relayr PD3OJFJL 15 (Dios~te)Disorp Loop teput Post Supply Failuis Rpela l PS48 /'JL PS6S FAIL 55 Aoloe Loop DOutput Poor Supplr FoitueRlop SP1n POFL.5(Discetes)sI A OL ~ Loep Orttur Poet Suopptw Pailiue RStari I1 pS lSFJ 15s tPoe oDrri .TR(CON ____PRIMARY RXM CHASSIS 23A LoeeS2 oldLeg Tesp. Leo-LTDOP 1 (Dossc~t)To-at D SOTDS Rx OTis (Distate)TC-4155 OPDT POs Trio TO-412D Tevo Lerw-Lso P15Il (Distaste)
TO-412G Sops Lops Feedwater  (Disoeta)LO-O459A PZR Level So Trip 1 (Distaste)
LO-529As/h 02 High-Hi 5 S Leost sTurbe Trip, FW Is~n PlO (Distate)L0--S~529 rSDG2Low-Low LesRa T~rip & A$W PupS~tar (Distaste)
LO-539h SrG 3Hit-hieSh Lean) STames Trip. Pt lets P50 (Distaste)
PO-DS0A Tuotie [reuoses Pre~sure 0.900t P13 SRNASA SSPS SOPS SSPD SOPS sOPS SOSP SOPS SOPS SOPS sOps SOPS (Distate)(Distrste)
P0-St1DGLoosI Stedine Press lIgh NesaoRat SoDmoiines 
[in e PO-s24ALoop2 re i Soepee Press St &StreLos lsw (Disetasi)(Distate)p0-534A Loops Ltosw nS Pr~ess SI &S~trnles ien Po-ssso Loop 3 hordies Pres High Negatse Rate Sotmines tie POS-4AhLO~p4 LeoStales Press 01 Stalnes Ilei (Discrete)
P0-5544 Leop4Otapep pressHigh DesoassesoDSprie~
Isis (Distate)..........
s oe Process Protection System Interface Requirements Specification Revision:
9 Page 30 of 78 Figure 1-6 Replacement PPS Architecture 
-Set I Non-Safety-Related Tricon Remote RXM Chassis PPS Protection Set I C ..... icat]orl Unks Fiber OTDT Interlocic C3 Manual Trip Switch TSNI1ID TSI411H PS8S05C (Discrete)
OPDT Interlock 04 Manual Trip Switch TRICON REMOTE RXM CHASSIS 3 (Disccete)
Turbine Low Power Interlock CO Manual Trip Switch (Discrete)
PS5NFAIL_15 Class II Analog Power Supply Failure Relay--Discnret)PS Isolator Power Supply Failure Relay P3NFAIL_15S(Discrete)
PSSNPILIS Isolator Power Supply Failure Relay PN.AI_ 5 (Discretel TM-4t2F TanS PCS MO 14-20 rmh) -P ,MR TM-411G Ouerterop Setpoint MCR (4.20 nrA)TM-411FP Overpoweer SelpointMO (4-20 rru)TM-11E Deltu-T PS C (4-20octA)
PM-P05h Turbine Imepulse PrecsureMO TO-411ID OTDT Interlock O3 (Discrete)
RNARA TC-ti tO OPOT Interlock 04 RNARA (Discrete)
P0-5505 Turbine Lore Power Intertock OSC5R (Discrete)
IRN A LY-529H PIG Low-Low Leueli"n'D Timer Actuated Alano-lMA (Disreete)
MA UY-P81A TRIOON Protection Setll Trouble AlanoMA (Discrete)
MA UY-PS'IRTRICON Prnotecion Set I Channel BYP Alarrm Ipioretl ~MAS (Discrete)
TY-41tTRICON Protection Set RTD Failure Alarm r MAS (Discrete)
FF5 Set I Chaneel Out ot Seruice Piano (Disocrte)
PROT SET I TRICON MAINTENANCE WORKSTATION COMPUTER Trionon n 11Prot Setl I Prot SetlI Prot SellI ALP SwthPrihrl MWS Comrputer 
~ Sic eihrl* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System interface Requirements Specification Revision:
9 Page 31 of 7B Figure 1-7 Replacement PPS Architecture 
-Set II ALS-A PPS Protection Set II RSt485 TAB Data Onk Disoonnected when not i se Al WortrstatloioABU PS/422 Data LitS TrXol TX Only l PPCGatewayp RD1422 Data Unk TXB2[ TX Onty Al Workstation tl gt I 
()22(FT-425 Loop 2 (4-20 oX)*($3) FT-435LOop 30](XI) T-AID(4-20 itA)[$4) TJ,45Loop 4 (04) r-44X(4-20 mA)TB-433A WR Tomp Loop 3 Hot Lag (2000a)TE-433iB WR Temp Loop 2 Cold Lag (200 0)T0-020B Loop 2 VIT-A Tooid-l (2000Q)*TE-400A Loop 2 DTTA That-IA l (0000Q)TE-4050 Loop 2 That-OX (2000Q)TB-422A Loop 2 Thot-IX (20030)(00) T-aSPPOR Preooun 4-20 0n ($6 PT938Containment Poer ()PTBB(4-20 p0A)FCoH1._FOJX0.LA FO-415 ow rLOM A (Disorete)
FO-425 FB LBMA F-425 Loop 0 Lra Flowa LO A*FC-435_0_0M A F0-430 Loop I Low Flpoa 10000 PO-A5_FPLBMA F0-445 Loop 4 Low Flow LOU A*(Disoete)PC-4506ABLOU
_A P0-4560 P2R Prsoor Hptr LOU A 1 P0-456B F0SLtM A P0-4000 Unhblock F1 -al I.S A PC-456OFRLOMA P0-4060 P20) Prasson Low LOB A (Disoete)pC-4560 DF LOMA P0-006D POP Pooeoun LowLow St LOB A *(Dinwete)PO-456E F LXMA P0-4560 FOB Fnessora High-POOP LAM A (Discrete P0-931AFBLSM_
P0-0300 Coot Papas High SI, Ph. A lain LOB A *(Discrete)
PC-936BBLSMA P0-930B Ctot Press 5igh-High Ph-0 loIsn, C~nt Spray, Oteamielnapin LOM A*P0-OAB.BLXrLA(Discrte)
FC-015 Loop ILow Flo BypassoA*FC-415_BypA (DiowotH)FO-425 Loop02Lo BoypaooA FC-425_BypA (Diowete) 
'FC-435_PypA FC-430 Loop 3 Low Plow BypoassA*FC445_BypA F445 Loopo4Low Plow Bypass A (DisPte), pC-45ABy Ap0-4000 P0R Pressute 6igh BypoossA P0-400 P~ A(Discrete)
P0-,4560 Unhloco 0I P-Il1 BypassoA .(Disreate)
PC-456_BypAP04060 POP Ponsosuno Low aypass A PC-4003apH(Disweto)
P0-43 g..yp_ P0.4000 POP Preamo LowLow 0I BypasMA *(Discrete)
P04060gap AP0-406B POP Prossone High-POOH Bypasso PC-016A Byp A p0-010A Otnrt Press H00h 0I Ph 0 slon BPasps A P0-OI0B Byp_ P0-936P Coot Preos tloth-Pllh P0.0 ( sin. Coot X~anao Otearnlino Isn Bopaso A PS3FAIL IIA ALS-A OhassisPowen rrop 1 Failura to40HA--- (Dowoeto)A (BCasisaownrap)oFoua(00 PS4FAILjiA PAralog Input Loop Prowen Supply I Fallurs (Disowe) I\ PS2FAILJIA 010 Cantost Waning Supain I Failure*w~(Disceta)
FF0S1TAB Sta0 (sA lantn PPti .......a_ A ...
..
* LOop 1L~w Flow Pa laip O1XSPX PC-4250.A Loop 2 Low Flow Ro Tdp ...4 (DOwo~to)FC-430 A LOOOI3Low FlowRJCTo (Disooto)T-4033A Loop 3 Hot Log
* PS ll Town (4-20 mar)TP-4200T6oo1-l
)4-20otoot TP-420A That-lA (4-20 tro)AL P40 TE*422A Tnot-3A (4-20 mA)P0-00000A POP Prpoour High R0 Trdp *(Discrete)
PSll Tduon PS ll Ttloon P8 ll Tdoon SPSIIT n saPs OXPO SOPO P0-4060A POX Frooun Low Rto 00p PC45PDA POP Presoute Loloaw 0I (0ia0e00)P0-0100 A CotmPnessHrhi.P Ih. Atosn (Discrete(PC-O3OBAOCtt Papas High-High Ph.0 loIsn, Cowl Optap. Stoamilno lisn (01000e00)
PC-400D A POP Prmssure 0104-POOH (Discret) 
-....PM-4lOP Loops Poox oolant Flow IO FM-425B Loop 2 Rx Calarrt FloIOO 14-20 rno) -O L I_P-P DIV0_A FF0 I1 Chassis 000 aIut obweP (Diwete) J IUY-PSOX D0V00 PPX gi Chassis A Troubl (Discrte)UH-P2aDwA FF0 it Chaoois A Channel Bypass (Dis to-t e)UY-rPO00DI 04 FF0))I Chassiso aA Fur LOisnto)!R (It Process Protection System Interface Requirements Specification Revision:
9 Page 32 of 78 Figure 1-8 Replacement PPS Architecture 
-Set II ALS-B and Isolation Devices PPS Protection Set II 001405 TAO Data LUnk /Disconneeted when eel in use Wrsao/S R01422 Data Lsnk 3T1XBI Slaa TX Only RS1422 Data Link "r0B2 oksfn t Il lit WI ($)F-1 4-20 rnA)(81 7.25Loop2 4S2) FT420(4-20GM)
(03) FT-430 Leap0 3n (op4-2 taO)(04) PT-448 Lee2prno TE-443A W0&#xa3;Temp Loop 4HotLeg (2005n)TE*443 S WO Temp Loeop -Celd Leg .(2045o)TE-421S Leap 2 OO-7A Teld-2 TE-4200 Leap 2 DT7A That-ISB TE-4210 Loop 2 D17A Thee-2S TE-AO2C Leap 2 D81A0T0ev-3S (So*) PT-456PZ0reu (04) PT-036202 FC-430 Leep CLaw Flew LOSM 8 F0-410_FB LOSMB(icee PC-MSPS LOF5 -,440 Lees 4 LaW Flew LOSE FC-420_FBLtSM_
8I PC-45 Lp 3L1Bow SM L1 PC.4300_FLSMB P {-0 is2 Pcte)u ne O FC.456SFELOMB FP-4000 Poop P4sv Leanlo LeaSM LO 8 PC-45AEPZR Pressuve Bigh-PS LOM e P0-456AFBLSMBE (Disanete)
PC-tS~p..B C-456lUnLoekp t e P-Iw 1pLSM (Disreste)
~~~~~PC-42teP6E 
-2 LaP 2ea PesueLaw 8010M B)Discrvete P0-456D 80_LS_ P0435D LepOLa Pre awr s B .(Diserete)
F0-415 Bypa P0-41S Lop4I Low Flaw Bypacs B 1 (Discetee)
P0-485 Lop26 PLoew FLaw Sypeass FC-42CByJpB 
-Slavta FC-435 BypB P0-4352 Loop 3ws Leaw FI ae SIypass B O 1 F0-Q45_BypB FC-44001 Pwss 4551 Ph. F lewB~s Byps PCC4500BByp B PvasHg-Sigh Ph. areIslre.
Cga Bypva.seas Isl Eyaa PC-, 456_yp..B (Disceteo)
P0-40006Cy P0-4506 820 Peessura 5Low00 Bypeas a .(Disrete)v PS-06DIypB P400-D Chasi Preessure LooI 2 SFelin eBVA( m (Oiserete)
PtP-3AILyp_8 Males3 Input LrepsHg 1 P h.ee Supplyn Bpasuv B PO4-03LB1 M alPes s Hg-ihP BInput Leap SeevupryStmlne 2a Isute Bps f ~~~~ALS- Chnassi Pwern Supply t Failurew 8A 85PaFJ_,, (Dslteveve P6FAILlie ALO- Ceh S a nsing P owupply 2 Poillute 48 p8541 ABILIIs (Disretae) f ~PPS1I Alarm Clesr t P II 0 0 0 (Dis~etela P0-4005 BLeaa t 00 Law FewTde (Dieseete)
PC-425_B L00p 2 Ro Lean PawTrip (Disarete)
FO-435_BLoop 3ERxLewPRcawTdp P0-MO5 B Loop 4-BaLaw Fla Tap 30-4430 Loepd 0evo Leo (4-20 etA)70-4438 Loep 4 Celd Lag (4-20 enA)TP-42tBETeld-2 (4-20 nvuh TE-4200 "rhaI-IB (4-20 etA)TE-4200 Thea-2B (4-20 eA)TE-422C Thet-OB SOPS P~ll Tlcen P~ll Tdan SOPS SOPS SOPS 0080 ALS-B (4-20 ae,)8C0-48 8820R Passuew Hieh Be Tde (Disretee) 8-4018 B UnhletoSIP-It1 (Discetee)
PC-406QB 828 Pressure Law Re Tdp l (Diso-ete)
PC-4018_S8PZR veessure Lean-Law SI PC.036A B Clint Press High 0I,Ph.8B Isle il (Disante)PC-0368_B0Ctm Pesas nigh-high Po. El]sie. Ctent Opray. Otmilne Isle PC-40082B PZR Pessure High -PORV 01580AS (D~scenete)
FM-4308 Leap 300x Coolanl Flaw 1 IO (4-2o04 IOOL FM-O445B Lp 4 R0Coolant low SQ (4-20 peA) i SL I U80-8022 2IM B PPSlIlonassis B Troubevae l (Bisanste)
LI*P-POPEDIVeB 
~PP I Chassis E Channel Eypase 1U0-8S202D018 P80S II hassis 8 Failure~(Disewte)
Leap PulseB (Disuvate)
A lt Process Protection System Interface Requirements Specification Revision:
9 Page 33 of 78 Figure 1-8, continued INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP P020)2200 (4.20 mA, , LLo4600COOXV-2)60 T0(0)P215 Loop I 22o,,P~es" 24400 02 40 (4-202n,4) Tipon2(214( pT-SOS (4-20 r2*A) } p0-534 0V30) EPPOS (200)t , (4-20 220)' T 24,.000(02)
Pr-9os P2426 (2021), 2RFD00(25)
Trc0n (020) PT-523 Loop 002 St 0ml 720222(0-2)14-50 Troon (042) FT-520 LoopO 220,2010,, Trkooo (0 13)1FT,,54 Loop 40 0tearm,, (0-020r2) pT..450 056 ,,, Thopo (22)12T-060 Pop LeoO (4-20024A) rTop, (010) PT2-5 LoppO2S~aToaPm~o (4-00240 Troon ($t22) PT-Sos Loop Step! 222 pmossu (4-002r4)--
T,20n ($14) pT_-045 0(02 St~]oe PlTrkoop(018)(LT..O (00029 Tr22on (022) PT-06 2024 pl,.Poo, (4-022o -A Tro 89)L-4 (0-024)2 n -02.2-0 FM2-05B Rx, To24ap Plow Lopp1 0L0-2 P2-0445 0,, PodOpt Flop LopoO (0-020) 522-Typ:202 PO-513_1 Loops1 Stoarboo to D-20 (0-20024)P0-523 1 oo 02400)0 (0-00e24) 
-FM-533_J Loop 0 0O,,20oo0oOF02C (4-02 r24)PO-sti L.oop 4 S~opro 22D0W)0 (4-0024), ..DEVICES-c  (4-020) nv (4-00 nW4)pM-535_1 tooo 0~ 0),,oaIl224 P022su0 Ft-0)F 0 (4-20o224) p0 -005_ Loo 4 0t20ndin4 P2s4u20to 020C0 2(2. P20 pCS020.02 20,F 242.02 (4-020 m)26-0044 .2O0 0202)(4-020224) 
-FM0-4244 2 0,, Co~opnt o Loop 42 t I424 (000)FM-0044 1 RoCooo Flop LoopOO P0-043S0B)00) flM-040j 24 Cooent Pow Loop4 o (2020 ,) Ia+I " i t LP2-OTP&2OS Let2._nO2O
-1F-1F L462002O+ -IF-I--I F-I F...... -tH.... -{F.... -2o -700-,00-2...... 002.... -020-O .00400 to 01?4+p00422,- ProItTret n Prot Set II HMI.S"," RO-o24D,,0L002X00 PROT SET(IIALSMANEAC Peripheral WORKSTATION SwichDevices ALS B'Q d whn u) I COPUTEKV Swo(tch. NM) peripherats shown on Figure b-lb Process Protection System Interface Requirements Specification Revision:
9 Page 34 of 78 Figure 1-9 Replacement PPS Architecture 
-Set II Safety-Related Tricon Main Chassis PPS Protection Set II One-Way Triconox NET2D Dote Link Date Link A PORT fTyp of 2) To PPODeGoe-ay (fyp of 2) }) AGO REDATORS Tr/ooneo SET2 TP B Dote Link (Typot2) ) (Tpot2) Wornstation t II (8)P-46 Loop 2 S/TA P0R Fnresure-Il (OR) T-ADS (4-DO mA)From (PLO) TE43 LoopO3WRTemnpneratue Hot (4-20ooOv(Fnom (PLS) TE.43 Loop OWR Teonpenatone Cocld ('4-20 onk)Fnom (ALD( TE-44S LooP 4 W Toonpenotone Hot Leg l (4-20 rnA)Fnom (ALO) TE-AS3S Loop 4AWRjTempenotore Cotd Legjl (4-DO inS)* NE-A2A Loop 2DSTA UppernF/ux (0-10 0D0)* NE-ADS Loop 2 DOTA Leone Pinox Fnom (ALD) TO-SODS Loop D DTiPA TcOotd-1 (4-DO noR)Fnom (.PLS) TE-4D15 Loop 2 DTTA Tood-D (4-DO ink)Fnom (ALD) TE-420A Loop 2 DSriA Thot-tA (4-DO0 WA)-Fnom(PLO TS-DOC Loop 2 S/TA Thor-ISB From (ALO) TE-4DIA (-2 LopD mA) ot- , LoopD2 D'rrA Thot-OS Fernm (ALO) TE-42"IO (4-DO mrA) -From (PLO) TE-4D1A Loop D D0ITA flnot-OB (4-DO WA)From (ALO) TE-4220 Loop 2 DnrA Toot-OS (4-DO rWA)Frm(DO) LT-42200 o D'0i4 Leont-3 _(4-DO WnA)(4-DO WA)Loop 2 OteamOow ($11)(FT-523 (4-D0 WA)(DID) FT-DOD Loop 0 Steamflow (4-DO WA)(Sl13) FT54 Loop 4 Oteamfiow (4-Do WA)(S4 T50 LOop I Steamltne Pressune (014) T-DtO (4-DO WA)(DD TOD Loop 2 teamline Fressroo ($15) PT-525 (4-DO WnA) (016) PT-DO5 Loop 3 Oteamline Peresure (4-DO WA)($r7) PT-DAD Loop 4 Dteamline Fressurame (4-DO WA)(018 LT-f5 S/GDt Lenel ($18) LT-519 (4-DO WA) -(Oro LT-AO /G04 Leoet ($19) T-549 (4-DO WnA)(S0 T56 Tat/inoe epu/ne Pressrem (DD TDS (4-DO WA) TRICON MAIN CHASSIS IS (4-DO WnA)TM-ADDS Loop 0 Cold Leg Tem-plo TA-ADD NOD2)(4-DO WA)TM-4A3A Loop A Sot Leg Temp to TO-DD NOD2) N RtoLID (PAM3O)(4-DO WA)TtA-AA3B Loop 4 Cold Leo Teme to TR-A44 NOD2)(4-DO WA)FM-53DO Loop t Oteamftow to FM-DtO-2 reolator MOO MOO 01 PM-013_2 Loop I Oteae-ton to O t FI-DID3S(SS)
S EFDOSI MOO1 I -.-l--( (4-DO WA) I C 0/] FM-ODD 0 Loop 2 Otoomtiow to 10 FM-D3DI Loop 0 Stormflowo to Pro- Fl-ODDNOD 
& SRFDS ~~(S OD ..., ..FO- F M-DAD_2 Loop 4 DSne-mtow to F/-DAD NOD3) 5SP5 NRFDS MOO IB2 (4-DO WnA) l C (4-DO rnD)PM-DOD3D Loop I Oteamflow to FM-02D-D (relator (A-DO WA)FM-DODD Loop t Dteamfloea to FM-DDD-D Isolator (4 r 2 0 WA)FM-DAOD Loop t Oteamflow to FM-D4D-2 Isooator (4-20 noA)*0-jQ VDC Powered Input from NISC icafion .....Copper"Links Process Protection System Interface Requirements Specification Revision:
9 Page 35 of 78 Figure 1-10 Replacement PPS Architecture -Set II Safety-Related Tricon Primary RXM Chassis PPS Protection Set II nI DP.sTAfA 51 LoopS O h. SOS LP2 D3AOOS(Shaete)
LTUO0DU Loop 2 010 0O5 Swoitchi LP2 _O/ OLoete) -PZP Leaet Ch. 000OSeSitch L460_OOS (D/swats)F513OOSLoop I Steanoloet 0h. 550 0stoPh"Loop 2 Steorelow 00.000S Switch P523OOS(Dinote I)Loops3 Stearnfcow 00.00 OS wti0 F533 OS(Dsrewte)
F5433OO0 Loop 4Stseamlow Cha. OOS Switch P (Dinsaste)
Loop I teamohre Pressure 0h. 0OS Switch -P535_OOS Loop 2 St ear'm/o Pasou C0.000 Switch (Dinsta)Loop 4 Stoorline Pteosure C0.00O0 Switch Ps45 COS (Dinotte)5SiG1Looel Ch, QOS Swuilutch 000 4 Leoel 00.000S Switch P506OOSTurbbine Ipuse Presuts 00. SOS Switch T453AS0SLoop 30WR Shot COS Set/th T433_OOS(Siscrete) 14055.555Loop 3 et ToOd 55S Switch T443A._OO Loop 4 WuSThotCOSS Sw~sh T4-05..SSSLoop 4 W TooTd 0OS Switch T443BOS(isectete)
P0-SchtABy Turbine Iwpulse Pressure High to P13 Bypass Switch TC-433A Loops 3 Ow Leg Towp. Low- LISPS Tdp Status T0-4210 STOTrT Tp Stotus TS/42t0(1Cee TO-A2tS POPT Trip Statue T01021G (Sioots)TOIOOS T0-200 Taos Loo-Loo Pt1 Trip Status ToosoooTO-422G 150o Low Trip Statue LO-40OA0PZR Lecol High Trip Status LSI400A(ist) 10/0100(O/ectete)
LC-540A 0/04 P igh-Hligh Lacat P14 Trip Status 10/040.0 (D~estIe)L0/0455 1-5408 S/O4tLew-Lwo Lae)e Trip Statue P0/01040-15 Loop49 I# SO4n PHeehHioSNguhLes PI4Tpats rpSaues P0-5200SG LoopsLow L~ievPel Trip Status PC-5306 Looprbtne/Ipus Pteoe.100 Neouh o Pale Trip StatUs P0/5300 SiAe PS/515APC-045A Loop 4 Low Srt/lins Preos Trip Status .PS51CP0-0505 Loop 4 Ott/na Ptess P/gh teguace Pats Top Status (P0/04et0 (Siescrete)
TC-41CCOTST PaxTrio TR]CON TC-42IGSOPST xTdip PRIMARY Ioiascret) 1 RXM TO-422D5Tavg Low-Low Pt2 CHASSIS (iosctete) 25 T0-4220 100010 PowawFedte.
Iinto 1 10-460A PZP Leuet H/oh Pa Trio (Diecrte)LC-519A 5/G51 OHOir+i/gh LhustlaTh/no Tate. PWlIsrt P 14 (Siotaete)
LC-510B 0101 Low-Low Laos) PaaTep &0AFW Pump Starts]L0-5490 S/G4 Hien-Pioh Leont Turbine Trio. PW Istn P 14 L0-C50554BSG4 Lww-LoLecet~l aTte& AW Prrp Starts SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS OsPO (Dhotete)P0-5500 Tutbine repulse Pressure h/ah to P13 -t(Disorete)
P0-5015A Loop I Low S0tline Press SI & OS/line Ilan l P0-0505 Loop 1 Statione Pwe High Nteouae Pate Son/hne nIs/sl (Sisaste)P0-520A Loop S Low son/ne Preso St & Sotmnne b/n 1 P0-5250 Loops 00S/Iins Paess ti/gh Negatue Pate Sooros letsn P0-030.0 Loops3 Low Sowl/na Press SItu Samline Isin P0-5300 LoopS Sa/Ilne Pwess P/gh Negativoe Rts Son/he nlot IDiscrete)
P0-5400 Loop 4 Low Son/ne Prees SI0 OS/One lesn (Disase)P0-0450 Loop 40S0m/ca Press P/gh Negotive Pate Son//ne losn)Soiste(e I n/Ore P/ben Oontwunboo/on Process Protection System Interface Requirements Specification Revision:
9 Page 36 of 78 Figure 1-11 Replacement PPS Architecture.-
Set II Non-Safety-Related Tricon Chassis PPS Protection Set II Links Fiber T T[ I T42D OTDT Interlock C3 Mansal Trip Swsiluk T014210(Discrete)
TS/42"IH OPDT Interlock 04 Manual Trio Swittch (Dincrete)
PS2NFAILI.6 Class II Analog Porcer Supply Failure Relay (Discrete)
PS5NFAIL_16 Class II Analog Fowcer Supply Failure Relay .(DIscrete)
PS3NFAIL_16 Isolator Fowcer Supply Failure Relay (Oiscrete)
TRICON TM-421 E Delta-T"4 tFO:Dr5IlU I C: RXM CHASSIS TM-421F Overpouwer Setpointl=
(4-20 rcA)TM-42tG Overtemp Setpoint MCR (4-20 mcA) -...TM-422F Taug PS C (4-20 mA) AS C PM-506A Turbine Impulse Pressure MC (4-20 mCR (Discrete) 
-....TC-421H OPDT Interiock C4 RAA (Discrete)
LY-519H P02 010 Lorc-Lcrw Lecel TTD Timer Actuated Alarm (Discrete)
MA UY-FS2ATRICON Froteclton Set II Troable Alurm .MA (Discrete)MA UY-FS2BTRICON Frotection Oet1II Charnel BYP Alarm I A (Discrete)
UiY*PO2C TRICON Prctection Oet RTD Failare Alaror A (Discrete)MA TY-421ITRICON Protection Set II DTTA RTD Failore Alarm MA (Discrete)MA FF0 Setti1 Channel Outetoferoice Alarms = MAS (Discrete)
PROT SET II TRICON MAINTENANCE WORKSTATION COMPUTER Tricen WonderWare Data Link 11 Prot Set IIHMI-' Prot Set II Peripheral Fret Set It ALS KVM SwitchDeis MWS Compuler eie* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System Interface Requirements Specification Revision:
9 Page 37 of 78 Figure 1-12 Replacement PPS Architecture 
-Set III ALS-A PPS Protection Set 111 RS/485 TAB Data I~nk -(>W~tta0~
Discennacted wean not in tewa W~ktgo/B 00/422 Data Unit TOBI TX Onl *FF0 Gateway S TX Only t ($1) FT-4t6 (4-2D wA) I (02) PT-426 Leap 2 (4-2o ena)(GD) FT-434 Leap 3 (4-3D wA)(04) FT-446 Leap 4 .(4-20 etA)TE4300 Leap 3 DTTA Tewld-t (200 G(TE-43DA Leaps O TTA That-IA (2oo0D)TE-431A LnopS3DTrA Thet-2A .(2oo D)TE-432A Leap 3 DTIA Ttwt-3A I (20o 0)(G5) pT-457 P0R Ptasauta (4-20 reA)Ceetainreent Paess (GB) PT-935 (4.DwA FO-416eLoopt Leer Flaw LGM A FC-4IG.FB LDM A (Discrete)
FC-420 Leap 2 Law Flaw LGM A P0-426_FBLSMA (Discrete)FBLSMAFC-43ALoop3LecwFlaw LSMA .F0-46 PBL~lA(Discrete)
FO-446Loop 4 Low Flew LOM A FO-446_FBLMA (Discrete)
POC.457A P0R Pressure High LSM A P C-4G7AFBLG MA (Discrete)
PC-4576 Dnbleckr SI P-It1 LOB A PO-457BFBL0MA (Discrete)
P0-57 P0R Pressure Law LOMA PO-4S7C-FB-LGM-A (Discrete) 1 P0-4570 POR Pressure Law-Law LOM A PO-4GPFBLSMA(Discrete)
P0-OGBA Chat Press High DI. Fh. A Isle LOG A*PC-435A FBLMA (Discrete)
P0-0358 00mt Press tigh-Pighr Ph B Isle, Orret Gprey, Gtwiine Isle LGM A P-45_FM A(Discreete)
PC-457EBLSMAP0-407E P2R prescure High PDRV LDM A*P0-430 ED OG A(Discrete)
F0-416 Lacy I Law Flaw Bypass A PO-4t~yoA(Discrete)
F0-420 Leap 2 Law Flaw Bypass A FO-42BypA(Discrete)
P0.436 Leap 3 Law Flaw Bypess A F0-436 BypA  FC-4 4_BypA FP-..440 Leap 4 Law Flaw Bypass A*FO-B57A P0R Precsaue H gh Bypass A PC-4G7A Byp A (Discrete) 
-P0-407B DUhbsocr St P-li Bypass A P0-407BByp A (Discrete)*
pC-47CBpAP0-4570 P00 Pressure Law Bypass A P0-470 Bp A(Discrete)
PC-457_BypAp0-4575 FOR Pressure Law-Law Bypass A 1 P0-43D~ypA(Discrete)
P0-OI5A 000t press High SI. Ph. A Isis Bypass A l P0-035A BypA (Discrete)
P-3_BpA P0-93B6 Ontmt Press it~gh-Itigh FhOB Isis, Chat Sprey. Otrlhre Isle Bypass A -l P0-030BypA(Disreete)
PC-45706Byp A P0-4576FB PtRPesuscr High P06RV Bypass A*/
ALO-AoChassis Pawer Supply' t Failure ()4eVA)(Discrete)PG6EAJLIIIA A (Discrete)
PSI FAILIIIA Anelog InpUt Leap Fewer Gupply t Failure (Discrete) 
'pPD4F/JLiIliA Anralag Input Loop Fewer Supply 2 Failure (Discrete)
I PG2PAILIiIA ALD Coetewt Wetting Gupply t Failure PSBFAILIlIA 
-ALO ContactD WettPing ypp 2 FaIlure -TAB Switch Gratus FF0 it TB GrtusA(Discrete)
F PGltPAre~eAParre Clear Ti (Discrete)
FC-4166A Leapt1 Law Flew Be Teip (Discrete)
F0-426_A Leap 2 Law Flaw Be Trip (Liscrete)
F0-43_A Leap 3 Law Flaw Ba Trip 1 (Oiscrete)
F0-446 A Leap 4 Law Flew Ra Trip 1 (Discwete)
TE-4306 SErA Leap 3 Tssd-1 (4-20 erA)TE-4306 DTTA Leap 3 Tnat-lA (4-2600m)TE-431A 0T1A Leap 3 That-2A (4-20 wA)TE-432A 0176 Leap 3 That-3A DGPS SSPG PG IIi Trloon P$0Il1 Trloon$SPO SSPG (4-20 wA)P0C-457AA PZR Pressure High Re Trip ALS-A (Discrete)
P0-457B A Daitblar $1iP-Il (Discrete)
P0-457G_ PZ6 Pressure Law Ra Trip (Discrete) p0-4570 A FZR Pressure Law-Law SI (Discrete) p0-035A6 A Cet Press High SI, PB. A Isle..... _A .........rg 
......PC-45766A PZ6 Pressuwe High PDRV -ll RN4AG (Discrtee)
PM-4t60Ba RCoaent Flaw Leapt 1IG]OL (4-20 emA)FM-206B Re Coolant Flaw Leap 2 IGO L (4-20 mtA)
* IO UY-PG3D DIV A PP~lii~mellohassisA OUrt oferaiaa  UY-PS3A DIV A PPS Ig Cthsis ATrouble (Discrete)
UY-PS3B DIVA FFS III Ohescal Bypass (Discrete)
UY-POS3O DIVA PPS Ill Failure (Discrete)
Leap Plses A (Discrete)
I Process Protection System Revision:
9 Interface Requirements Specification Page 38 of 78 Figure 1-13 Replacement PPS Architecture 
-Set ill1ALS-B and Isolation Devices PPS Protection Set III 651405 TAB Data Link Cwultinwo Disconnented when ant in use -,, okte~r!S RS1422 Data Unk TXB61 031422 OnlyPPO Gateway ixOnly tl u~t(B1)FT-416Lop (32) 20-420 (33) FT-430Lop2 l ($34) P-446Lop TE-4316 Laop 3 DnIA Taold-2 1 TE..4330 Leap 3 DOFrA That-lB TE..4310 Leap 3 DTrA Tntot-2B TE-432C LeapS3 DTrA Totat3B (05) PT-457 PRPesr (08) 1-933Cantainmeet Preen FC-4t16 LLMop(IaLwete)
LM P0-416 FB_LOM_B -P0-46 PBLOMP0-426 Laop 4 Law Flaw LOM B PC-4276 FBLOM B PC4O7CPLOMO PC437 6 Loprtur LawFlw LOM B PO-.36..FBLSMB P F3AC 8Lor p P 4e High Fth.Alain L OM B I P0-4370.PBLOMBPD-4576 P2R Pressure High POLOM B PC'457A B LSM B(Dscerete) l FC-4t~ypBP0-457B LeaptoLawSFlawtB1paa B P0-452C Lep 2ssr LawFlw BypeM B FC-452CFBSM_ (Disarete)
FO-30Bp3P0-457B PLPessur Law-Flaw LMByaB P0C4457Leap 4 Law.Flawi Bypate)Pc-g35A FB LSMB ~P0-357A PCtmwaeres High ByPh.AusnaL B .(Diacrete)
PC-935 QByF_ pMB PC9B CrtPress7 Pih26 Pre Itaur Law Bypraye BmlntaaLMB 
, (Discwete)
P0-4570 P2R Preasure Lan-La PRLBypn B PC-470.Bp.B(Disareata)
P0 ,-SODA Chat Ptee High S w PhBAtleypass B PO9-416Byp B (Dinerete)
FC-326_BypB (0D1 htPrt -o- igsP6l~,c hate SpaOhlr li ypt POO7P~ypBP0-457A P2R Preesare High POHBypass B PS-45ALBy11B (iscerete) 
-'PC-PAL57B1 UnbCha s~eweSI P-IBp~uass B 4uee PC-47BBpB Diesretea)
PC-47C Bp..B(Disrwete)
PC457D Byp B(Diswete) lr PC-93a._JIB ALS (Diseath e )r upy alr (Discretel L I liBALS- Chrrsis P eower supply 2 FaIlure (4V)" PSOFAIL 1116 L- h ssis oe 0p ~l~ .S.PPS I TB~taang(Discrete) 4 PPO FIllXa IB Clear9 Input Lo APowe Cuple'2at lr I I(Diascrt) tu-nteJe Loap t awuaw LO-law tap (Ds lcretea)F0-4286..
Leap 2 Rx Law Flew Tdp (Dinarete) 1 F0-436 B LeanO 3Re Law Flow Tre -(Discrte)FC-440 B Looae4BuLow Row T~e T3-4316 OTnTA Leap 3 Teald-2-SOPS-SPS-SOPS-SPSIITcn-PS Igl Ttiron-PS IIl Triton (4-20 etA)TE043005DTA Leap 3 That-t B (4-20 etA)T3-4310 DTIrA Leap 3 That-2B (4-20 etA)T6-4320 OTTO Loop OlTrot-OB (4-20 euA) -....PC-457A_6 P0R Pressure 6ig5 Ox T~p ] SOPS (Discrete)
P0-4576_B Ujhnalon 01 P-It 1 ..ALS-B (Dscerete) 
----P0.-4570_B P2R Prenaure Law Ox Tdp l, 5P (Disat-ete)
P0-457DB P2R Pressure Law-Law SI ...(Disarete) 
--- -P0-93MAB chat Presa Hig6 SI, Ph. A lain -1 SP (Discrete(P0-93056-Cent Press High-High P68 laIrn Chat Spray' Ohaline  (Discrete)
SP PC-457PB P20 Pressure High POOH NS (Diacrete)
FM-4386B Leap 3 Ox Catlant Flaw IO PM-lGB~ep4Oxeelat~la ISOL (4-20 tmA)UY-PSODDiVB PPS Ill Chnassa B Out at Seraire -.I I LIy-PS3ADIWB PPS Ill Chassis B Twouhie (Distrete)
I UtY-P03BDrB PPO Ill Chances B Channel Bypass (Disrwete)
UYr-PS3CBIB PPB Ill Chassis B Failure (iskarete)
Leap Pulse B (Discre te)" y N lIt Process Protection System Interface Requirements Specification Revision:
9 Page 39 of 78 Figure 1-13, continued S INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP +Tlion (s7) pT- 0 14od 04,n00 PoSuo Loop 4 P-0 )0.BA 414 (4-00 mA0) R0 V2.RU A4 TPW(1)LToI1 0-461 04000 Tb, (B) 1-401 (4-20 0,3)Stmroo ProooLop 2 TIoo ($10) P0-526 p1-503004043 (4-20,1n3) 01tm4,e Proootoopl 3 10444(Oil) pT-SIB (4-200 t) V 0101 b 1  U-IB000.030l4B Triono (0 12) LI-SIB -58(B3* VI (4-20,1n3 T,4con (013) T1026 014140 LI-SOB NODS(B1)T4co4 (0 12) IT-BIB (40,03 U-SO (B3) 04004 S 2100 41 )(4-20,03m) 103041d ,,+1T4o, (SB)  (4-20,103))
Trion (SB0) 1T-401 TrOon ($10) PT-5340 p3seaLeP~(4-20,r03) 1T00 (SIB2) PT-B18 S400A01 Lev~1eT 01L (4-20o 03)Tdo. ($12) IT-SI5 032a bo (4-20,r03)
T4 ($S3 LT-528 (4010 (4-2o0r0)Td403$4)I2 LT-SI53O8oo (4-2or03) 
-Tdo, ($15) LT-540 (4-20 I'A)AL~lA(sS)
T-457 (4.201103) 
.(4-20,1r1)-twil, (4-00 IA)P14-526_1 Loop 2034team0e 010003(M44 10 Loota 4 e'J~ 03100 04-510101 B/ 014 0IeveI (4-20 rIA)(4-20 rnA)((-208 10/G3)ve (4-20 IA)(4-20 o03)(4-20 rA)F4-4061_I10040o4100Row 2p 2 202-420 NOA2 (4-20 IA) I PSI-4IB..
10300o110r04F4w00Loop 43 NOO VB) .(4-00 IeA)FM14-4B I 401 R ,1o0n10014oo414 o 0-116(N2)MCR MCR MCR MCR ,1 lt ,,-o.2400 +,, 11BT00F-i I-F-i F-L401_C0 P403_000 HFl-iI-012lO0 01210000 Isso2Bs 101000s-if--H-if H-f-......42 -1 F-OB00 LI F I perr014s10o IoIM P,410oITo,.
1 r)Se I Prot Set Ill H-MI SSO13oA3A2 PROT SET I)( ALS 033Comp03or A1S0 "04 RKVMO.U, m Peip heral 00-I0TAOU04UTLMAINTENANCE Sic eie (04014000411144 WORKSTAT(ON KVM Switch, HM) peripherals shown1 on Figure 1-IA Process Protection System Interface Requirements Specification Revision:
9 page 40 of 78 Figure "1-14 Replacement PPS Architecture 
-Set II! Safety-Related Tricon Main Chassis PPS Protection Set III One-Way Tricnox ET2Data Link DTaricnkx AEPORT (Typ of 2) .To PPC Gateway (Typ of 2) AGGREGATOR Tricanex NET2 TAP B Data Link)'rppo2) )Typ o f 2) Workstation tL II t lt (5PT47 PZR Pressure (D'nTA) I (05) T-457 (4-20 nmA)Prom (ALS) TE-430B Loop 3 DOTTA Tcold-1 -.(4-20 mA)Prom (ALS) TE-431B Loop 3 DTTA Tcold-2 (4-20 mA)Prom (ALS) TE-430A Loop 3 D'TTA Thot-lA*(4-20 mA)Prom (ALS) TE-430C Loop 3 D'TFA Thot-1 B 1 (4-20 mAv)From (ALS) TE--431A Loop 3 DTT'A (4-20 mA)Pmom (ALS) TE-431C Loop 3 DOTrA Thot-20 (4-20 mA) -Prom (ALS) TS-432A Loop 3 D'TFA Thot-3A , (4-20 mA)Prom (ALS) TE-432C Loop 3 DTTA Tthot-30 .(4-20 mnA)Lower Flux*NE-43B , (0.10 VDC)*NE-.43A Upper Ftuxoo (0-10 VDC)PZR Levet ($9) LT-461 (420mA S/G 2 Stmiine Press (010) PT-526 (4-20 mA)0/5 3 Strntine Press (511) PT-536 (42 A S/G 1 Level (012) LT-518 (42 *A 0/5 2 Level (013) T-520 (4-20 mA)S/G 3 Level (014) LT-538 (42 *nA 0/G54 Level (010) LT-548 (42 *A (4-20 mA)(S)P-0A Loop 4 W/ide Range (4-20 msA) iw.TRICON MAIN CHASSIS IS* 0-10 VDC Powered Input from NIS TTTI Coinmmuniation Links 000 Cope Process Protection System Interface Requirements Specification Revision:
9 Page 41 of 78 Figure 1-15 Replacement PPS Architecture-Set Ill Safety-Related Tricon Primary RXM Chassis PPS Protection Set III LP3J lilA005D'nA Loop 3 Ch. DOS Switch DTTA DOS([iscrete) noD Loop 3 COh. 003 Switch 1 I_'T' oOS (Discrete)
Wide Rangpe Pce~sore*
Loop 4 COh. 00S Switch p403_0 0 (Discrete) 472402 de Rar~ePresureLcop 4ChS OS Switch P05 Level Ch. D05 Switch L45I_00S (Discrete)
Loop 2 Steomlitne Pressuree CO, 005 Swetchroi P526_OOS(Disceret)
Loop 3 Steamline Presvre CO. DOS Switch Sf3 1 Level CO. DOS Switch I L518 005 (Discrete)
Sf3 2 Level CO. 005 Switch L528 005 (Disorete) 513G3 Levet CO. 005 Scotch I L535 003 (Discete)SitS 4 Level Cit. 005 Switch L5_O 005 (Dikcrete) 
'Presure Low (R0R 8702 Irloercck)
Trip Stoles (Discrete)
Pcesocre High (LTOPS) Trip Stotum PC403D (Discrete)
TSt431G Overpower Delta-T Trip Trip Stales1 (Discrete)
TSt43tOC Ovesemp Dclta-T Trip Trip States (Discrete)
TS/4320 Low-Low Tevg P-12 Trip Stores l (Discrete)
TC-423G Low Tovo Feodwriaer (ste Trip Status 1 (Doscrte)LSI4SIA P0R Lovet Higrh Trip Stotus (Diorreea)
PS526A Sf0 2 Low Sotl~ine Press St1& Starnes Isle Titp Status I PSiS506 3/G02 St eoalive Press Hi Negatve Rote Sreareirr tsdttion Trip States (Discrete)
P S/5AS$103 Low Stretue Pres SI & Stmres sItn Trip States (Discrete) piS/36C Sf0 3 St eamline Pres Hr Negative Rate Steomenve boototicn Trip States (Discrete)
L3SI1A Sf0 1 TreS Trip, FP lIsl, P-t4 Trip States (Discrete)
L8/518B Sf0 t Lois-Low Level Trip. AFW Puep Stort Toip Status 1 (Disote)Sf3 2 HIt-Hi TUch Trip. Feedowter Isle, P-14 Trip States L~tS2SA(Discrte)
LSI528B Sf0 2 Low-Low Level Trip, HEW Pump Stort Trip Status , LS/538ASfG32 Hi-Hr TutO Trip, Feedwastet Isle, P-t4 Trip Status ](Discete)LSI53SB 313 3 Low-Low Loete Trip. AFW Puop 3tar Trip States (Discrete) 1 LSI548ASf34 Hr-Hr Tor Trip, Feedwoter Isle, P-t4 Trip Status (Discrete)
L515445 Sf3G4 Low-Low Level Trip. AW Pump Stars Trip States 1 (Discrete)
SFJXLI AMalog Loop onpus Pomer Supply Forume (Discrete)
Pi_FAL17 Antalog Loop (npvs Power Sup plp Forum _ (Discrete)
Loop (opus power Supplit Pailure RelaopI PHIL 17(Discete)
_FPIL LIT Discrete Loop Onpus Power siopgrip Foillow  PC-4020 Pressure Low (RHR 8702 lnterlook)
TRI CON PRI MARY RXM CHASSIS (Discrete)
P0-40D Prescore FHs ILTOPS)(Diowete)TC-43tG Overpower 
~oI-T Trip (Disorete)
TC-.3t0 Overteme Delta-T Trio (Discrete)
T-4322D Low-Low Taco P-t2 (Discrete)
TC-4320 Low Toys Feediwater Isis (Discrete)
LC-461A POR Level High Re Trip p0-5200 Sf3 2 Low Stmlite Press SI & Stmlive Irsn Dioscrete)
P0-526C Sf3 2 otoamliee Press Hr Negotive Rote Sboomicre Isloato n (Discrete)
P0-536A Sf3 3 Low Strelive Press 5) & S0011ne Irsl (Disowe)p0-5360 Sf023 Steamlne Pcess Hr Negatos Rote Steomelte Iatuloc n -(Discrete)
L0-5tSA Sf3 1 Hi-Hi Outb Trip, Feeriwotar Isdn. P-t4 1 (Discrete)
L0-518BSIG t Low-LcrvLevelTiori FW PueroStart (Discete)L0-528tA S1G02 Hi-Hr Turbt Trip. Feedwot er Isle. P-t4 (Discrete)
LO-525B 0/G02 Low-Low Level Trip. AFW Pump Staos (Disortae)
LC-535A Sf0 301-Hi Turb Trio. Feedowlt oe.sn P-t4 (Disorete)
L0-5338 Sf0 3 Low-Low Level Trip, AMW Pump Start (Doworte)LD-5480 010 4 Hi-HI Turb Trip, Peedowler Isle, P-14 (DOorete)LC-,548B Sf3 4 Low-Low Level Trip. HOW 50rt5 1 (Discrete)
RNSIA SOPS SOPS SOPS SOPS SOPS SSPS OSPO SSPS SOPS SOPS SOPS 8SPO-4P p023.POS7S P030.LZ. 4LP151,rsvicrs 
~..olts ..Un F~be f Process Protection System Interface Requirements Specification Revision:
9 Page 42 of 78 Figure 1-16 Replacement PPS Architecture 
-Set III Non-Safety-Related Tricon Chassis PPS Protection Set III Q Cororocrnrcation Links Fiber TM-432F Tavg (4-25 mA)TM-431G Ocertenup Sorpoint*-D PCS, MCR-D, MCR Overpower Delta-T Interlock CA: Macual Trip Switch TSI431H Tlip Switch TSI431D Trip Switch (Discrete)
Overtenrp Delta-T Irrtertock C3 Manual Trip Switch TRICON REMOTE RXM CHASSIS--(4-20rrrA)
TM-43"IF Overpower Setpoint (Discrete)
PS2N FAUL1 (......
PSSN FAIL 17 Class IlAnalog Power Supplh Failure--(Discrete)
PS3NFAI 17Isolator Power Supply Pailure Relay P -N.PI-1 (Discrete)
PS6N FAIL_17Isolator Power Supply Failare Relay l PSONFAI 17(Discrete)
(4-20 rrA)TM-431E Delta-T (Discrete)
TC-431D Overterop Delta-T Irtenlock C3 ONR (Discrete)RNA PC-52OB S/GD O teawline Low Pressure Alerm (Discrete)MA PC-538B Sl/G 3 Stearoline Low Pressure Alaoo)Discrete)MA LY-518Hi SI'G Law-Low Leuel TTD trimer Actuated (Discrete)
UY-PS3ATRICON Protection Set IIt Trouble Alarm -P A (Discrete)MA UY-PS3BTRICON Protection Set lit Channel BYP Alarmno A (Discrete)MA UY-PS3C.TRICDN Protectian Set RTD Pollute Alano A (Disorete)MA TY-43t TRICDN Protection Set III DTT'A RTD Failure Alaoo A (Discrete)MA (Discrete)
PC--403B Pressure Hlgh RHR Not Isolated Alaror (Discrete)MAO* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System Interface Requirements Specification Revision:
9 Page 43 of 78 Figure 1-17 Repiacement PPS Architecture 
-Set IV ALS-A PPS Protection Set IV RS1405 TAB Doss Urns Disconnected whec not in use -//r , RS!422 Da kt ir 02.. 1 TX Only PPC Gatewaoy R01422 Data Linko T)B2 S TX Only Worksotation f ll ,,4, I1 T-40 Loep 4DTTA Tr8d-1 15-408(200 0)TE.4-OA Loop 4 DnrA "rn01-IA (2000Q)TE-441A 1oop 4 DflA Thrt-2A (2000Q)TO-442A Lo0004 DTTA Thet-3A TE-454 PZR Vapor Tamp (2000n)(SI) PT-474 PZR prescore (4-20 es,)(02) PT-034 Conteirnment Press (4.20 rcA)PC-.474A_FB_LSMA PC-474A PZR Pressore Loon LOM A_ (Discrete)
P C-474CF BLSM.A pC-474C PAR Pressure High LSM A (Discrete)
I P0-4740_FB LSMA P0-4740 PZI( Pressure Los~o-Lw LOM A (Discrete)
PC-934A..BLSM.A' PC-g34A C00n1 Press High SI, Ph. A Isin LSM A (Discrete) 
'PC-934BFB L0M A p0-934B Coot Press Hish-High Ph B les.n Ctet Sprey. Otelne Isir LSM A---(DiSCrete)
PC-474BFB LSM._A pC-474B PZR Prescore High -PORVILSM A PC-4?4A FBypJA PC-474A P08 Pressure Lrow Bypass A (Discrete) pC-4740 PZR Prescore Higth Bypass A (Disrte)
P2R Pressure Low-Loon Bypass A PC-74P8BpA(Discrete)
PD-934AFBBypA PC-g34A Ctot Press High St. Ph. A Isto Bypass A (DLScree Pc-gg4BBByp A P0-934B Coot Press Higtr-Hi4h FOB Isir. Ctnt Spray. Sozntine Isir Bypass A PC-02B...P~ypA(Discrete) pC-47B FB yp. AP0-474B PZR Pressure High -PORV Bypass A PC44j~p~(Discrete) 
"// pS3FAILIVA ALD-A Chassis Pooner Scypty I Fa4-re (e-48VA)(Discete)6SFAILIVA ALS-A Cthssis Power Supply 2 Failure (04081B (Discrete)
P54Pt AILIVA Analog rnpot Loop Peower Supply 2 Failure (Discrete) 
'PS2FAIL IVA AalS ptaLo Wowerg Supply 2 Faiture (Discrete)
PS2FAIL IVA ALS Contaict Wayting Suppy 2 Pature (Disre)PS IV TAB..StotusA PS P/TAB Sonitta States (Discrete)
PS IVAlar Cler._APS IV Alrm Cloor pP/aelrA(Discrete) 
=I ALS-A TE-445B DTrA Loop 4 Tootd-1 P I Vu ./(4-20 reA) I-P VT~o TE-44DA DTrALoop 4 Thot-IA ptmo (4-20 msA) PIVTco TS-44tA DITA Loop 4 meot-OHP VAio (4-20 rnA) P VTSn TE-4-IDA DTrA Loop 4 llcI-3APDIsbr (4-2D erA) .PSITdo 18-454 P28 Vapor TerepessatrePSpsie (4-20 rnA) PIVTcn PC-474AA PZ8 Prescore Low PRx T rip gp (Discrete) -SP PC-474C A P2R Pressure sigh 85 Trip (Distaste) -SP pC-474DA P2R Prescore Low-Low SI SP (Discrete) SP PC-934AA Ctmt Press Highr SI. Ph. A Ishi (Discrete) -l SP Pc-924B Ah Coot Press High-High Ph B Istn, Coot Spray, Soolire Isis (Discreta) SPg P0-4748Bh PZR Pressure High -PORV BSS (Discrete) iRNA i I'1 (UY01-PdS4DOP/VA ppg IV Chassis A Out ofSencice 
-UY-pS4ADIP/A PPS P/ Chassis A Trouble-~ (Dioscata)A LUy-PD4 B_SIV.A FF01 IVtChssis A FhannuelBps (Discrete)
Loep Puose A (Disorete)
,," I Process Protection System Interface Requirements Specification Figure 1-18 Replacemea Revision:
9 Page 44 of 78 nft PPS Architecture 
-Set IV ALS-B and Isolation Devices PPS Protection Set IV RS1485 TAB Data Unk Z Dishannected when eat in ace Si 58/422 Data Link TXBt tO nlyPPC Gateway 53/422 Data LUnk TXB2 I iX Only E arwan t II'It 01445Loop 4 DTTA Toed-2 (2DD 0)TB-44(DC Laay 4 DTTA Thot-IS}1 (DD0 0)TB-441C Leap 4 DTTA Thot-2B l (2DD0 )TS-442C Lonp 4 DTrA That3D (2D0 0)(SI) PT-474 P5Pcu (4-DD wA)(SD) T-SMonetainwent Pwess (4-GD emA)PC-.474A 7ZR Paeaceae Law LDM B PC-44&FS1DM(Disrewte)
PC.-44C FBLSMBP0-4740 PZR Pressuwe High LDM S PC-44C~tDMB(Discaete)
P0-475 PS GM SPC-474D PZR Pnessure Law-Lea 1DMB PC-47DFBSMB(Discrete)
PC-34 FBLS BPC-O04A Chat pwees High DI. Ph- A aint LDM S PC-S34PSLDMH(Discnete)
PC94 BLMB P-9BC ha ec ih-ihP t , Chtm Syny Da/a. A~ls a LDM S PC-SMSBLDMS(Discrete)
PC-445PSDM5-454 P2R Panesuwe Sigh -PORV LDM S PC.A4A Bp._8PC.-474A PZR Prnesune Law Sypase S PC-47A~ypS(Discrete)
PC-474_BypBP0-474C PZR Panessur High Bypacs S PC-474~yp.S(Dlaseete)
PC,-4745 PZR Panesune Law-Law SBypass S P0-474D BypB (DisCreta)
PC-934_BypBPC-93MA Chat Pwaes High DI, Ph. A asla Sypacs S PC-93A~yy5(Discrete)
PC-934B Chat Panes High-Sig h Ph 5 eIin, Chat Syray, Sha/lne tain Byypaas S PC-934B ypS B (Disceteg PC-A4BSpBP0-474B PZR Pressuew High m-PORV Sypass S P0-745(Discree)
/ 3FA/L IVB ALS-A ChacaisPewerhaul I 1Fature l.48VAt)Diaawete)
PDS1PALJ _VS ALDACaain c nutLo PoweehSayaln2 Failune 451 f Pt4P.0IV ALan IVe B .SanIptLo owrSpl alr ALS-S 4 10-441B ClrA LanIa 4 Tnete-2 (4-2D mAn)T0-4400 DTTA Looa 4 That-IS (4-GD atA)T0-,4410C DTIA Leonn4 Thet-2B-POSaI Tcne PD IV Tdcne (4-20 wA)TE-4.42C CDTrA Leap 4 Thot-GS (4-GD wnA) -....PC.-474.&S P25 prnessue Ha Thy DDSPS (Discrete) pC-474C_5 P25 Pressure High Re Tsp Di O SPO (Discrete) pC-474C..
p2R prescure Law-Law Dl -..(Diecetew)
PC-5M4A_ Chat Press High Sl, PRa/rip -iaSP (Diecaeta)
PC-9MtS- Chat Presa High-High Ph S starn Chat Sprany Sha/ne in tale SasP (Cisneeta)
PC-4745_B P2R pressure High -PORV (Discaeta)
UY-PS4D DIV SBPPDShaChaccicS Outoaf ernane (I (Discrete)
UY-PS4A DtVB PPD ha Chaenle S Trouble*ilRNS'a- i (Disneete) tDY-PD4tCDIV PPD tV Chuasse S Chunnelt Bypass (Discrete)
UY7-PD4O DIMS PPD IA Chassis S Failure Looe pu/ce S (Disreaate) lit Process Protection System Interface Requirements Specification Revision:
9 Page 45 of 78 Figure 1-18, continued I INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP Trons (09) PT-425 Woo Rango P0s0u0w 1-p3 l P1-405 (V42). 0RFD5 (VB4). RVLIS (P083)(4-2 0 ovA)TrPn,n ($5) PT-SIB Loop I 55000m P400u040 PI-516 (4B3)(4.20 oS Pr54(44 T~con ($5) 1T-047 Loop 4Smle) Prssr RO 44 (4-20 evA)lrion (80) IT-SOP 50521oLI -SOP (405). E0F20 (484)(4-20 sA)Trion (57) 11-537 5101-n) LI-527 (403), ERFOS (484))4-20 mS)Tlcns (04) LT-5374iP LI-547 (4B4), ERFD25(404)
(4-20 mA)Tti0on ($4) PT-547 (0 P1-524470/))
4RD V4 ((4-20 esA I(4-/00 S1 T-3 4")0DEV)CE (4-2-24 nB1))Tdvon (S3) 1T-527 oo 0)0 boo)ran Prsur so8or-521 
$102op 1 -Sevrln (4-20 ToO) 1 )(4-02 evA)* D NC Tflns (57) IT-OS? L~ 3)0 Lovo ) eie rs~ P -M- 5546_ 9op )03e rioo Prsue* Or#csw (4-20 soS) II(4-22 mAO)TSs 501154 05 Love)l LM-547 0)041-e Lve)Tln(5LT57 (4-20 on) *(4-420 nAvo(FVC, 01-0)0(85)
P5-474 P4-2 Pmsv) P*- 4DPEVICErS 7147(4-04)
Pl ooA w o) 254 AMOO.P2 (4-20 on*) (4-20 on)AW/ (t o-7 BonR Procour Love P 8-405_1 Loop 4053ur Pr-474 to2) P1-0 (402)ur E ontrS (404) Tos(0P-20 (4-20 mA) (4-22 on)82 f k I I ,, ,, O +24 VDC LP4 2510003 F-I I-......0 HII-H-L54P005 1-] H P405AoS -t H-1-2,_003 -tH LS4P 00-I H-1547_.0 -t+1+Protection set[voos K( PermLss]vetoMAS ALSA' (I .....d'Vh, ntt 1 Prot Setl IV Prot Set] IV ALS'A'* RS -422 Data Lln01TXB PROT SETI(VALE Mis~vro~po..s KVM HMI Peripheral
...-4......WOoKSTATAoMA)NTENANCE 21 Switch I-I Devices I A1-00 "01 (~~nncewono~s)
COMPUTER ALO*0 02" RS-oo2 Dose U)0T502 KVM Switch, HM) poripherals shows on Fi)gure 1-21 Process Protection System Interface Requirements Specification Revision:
9 Page 46 of 78 Figure 1-19 Replacement PPS Architecture 
-Set IV Safety-Related Tricon Main Chassis PPS Protection Set IV One-Way Tricanex NET2 1 Data Link Data Link A [ PORT (Tp 12) To PPC Gateway~Typ of 2) " /AGGREGATOR Tticanex NET2 TAP B Data Link (Typ 0f12) (ryp of 2) c Workstation t II (Si) PT-474 Prom (ALS) TE-440B Prom (ALS) TE-441 B From (ALS) TE-440A Prom (ALS( TE-440C Prom (ALS) TS-441A Prom (ALS) TE-441C From (ALS) TE-442A Prom (ALS) TE-442C*NE-44B*NE-44A (S3) PT-5I6 (S4) PT-54e (S5) LT-517 (SB) LT-527 (S7) LT-537 (S8) LT-547 (S9) PT-405 (S10) PT-405A Prom (ALS) TS-454 PZR Pressure (DiTA)(4-20 mA)Loop 4 DTIA Tcotd-1 (4-20 mA)Loop 4 DrrA Tcold-2 (4-20 mA) -Loop 4 DTTA Thot-IA , (4-20 mA)Loop 4 DO'A Thot-lB (4-20 mA)Loop 4 DT/'A Thot-2A (4-20 mA)Loop 4 DTTA Ttrot-2B D (4-20 mA)Loop 4 DTTA Thot-3A =(4-20 mA)Loop 4 DITA Trhot-3B (4-20 mA)(Lower Plan (0-10 VDC)Upper Plaxn ](0-10 VDC)SIG 2 Stmline Preon (4-20 mA)5IG04 Stmline press (4-20 mA)GIG I Level (4-20 mA)S/G 2 Level (4-20 mA)SIG 3 Level (4-20 mA)GIG 4 Level (4-20 mA)Wide Range Pressure Loop 3 (4-20 nmA)Wide Range Preossure Loop 4 (4-20 mA)PZR Vapor Temp *(4-20 mA(TRICON MAIN CHASSIS IS* 0-10 VDC Powered Input from NIS Communication LUnks Copper Process Protection System Interface Requirements Specification Revision:
9 Page 47 of 78 Figure 1-20 Replacement PPS Architecture 
-Set IV Safety-Related Tricon Primary RXM Chassis PPS Protection Set IV t ? C catln ....CppeLinksTRIOCON PRIMARY~RXM Ib CHASSIS 28 POR VaoroeperatCre Oh.00 Swit u/h T4h4_OO80 LP4 DUTAOOS LP4JI"D-D00O P40500O3 P403AjOO3 p54600OS L527.003O"L537_003~~L547OO pC435A LW H I rir1rrurero 
-(Diso.rte) lOisrerte)
S/TA Loop A Oh. 003 Soirrh (Dicarete)
TOO Leep 4 Oh. 003 Soird, (Disreere)
Side Raree Pressure Leon AC/v 003 3w/ru/n P0-4305 Pressure High {1.TOPOI (Dis-erre)
TO-4AI G Overpoweor Oelra,-T Trip (Disorete)
Wide R/anre Pressure oeee A Chn. 003 Swirtrh Discerete)
TC-4-41C Ouroeme DrIta-T Trio Loeee 1 teamlive Pressure Ch. 003 Sri/rch (Disreete) 10-4420 Lowi-LereTeug P-tO2 (Disreete)
TC-442G Low Tavs Peru/waler Isir Leer 4 Sreaorfee Pressure Oh. 003 Sri//ea (iscuretle) 3/0 &#xb6; Leave0 Our/Sdrc (Disreere) 3/0 2 Level 003Se//v/n (Disretle) 3/3 4 Level 003 Sari/dr (Discreete)
Pressure Lure (1/HR SP0t lnter/ior)
Trip Stausi (Discret/e)
P0-516A 3102 Lor Sot/rie Press 31I 35S0n/re Isir (Disreter)
P0-316C03/02 Sroaeal 00 Press lii Regal/srve/ae Steomirne lssloaleon (Disreter)
PC-S4ASGA3/0 Lerwtuhrrle pressS 3& Sorliro Islo R/NASA 33P3 33P3 33P3 SOPS SDPS S3SPS S3P3 SSP3 SSps 33P3 33P3 33P3 SSPS 3SP3 (Diocrete)
P0-5460C3103 
/euemline press Hi Nega/re Rare Steare/re Issla/or (Disreere)
LC-S17A 31G01 HI-Hi Tur/n Trip, Fendreater lIsn. P-14 (Diserete)
P0435D pressure H/Jh ILTOPS) Trip 3/a/us (Disretre)
T13441G Ounipseurn Dnlsa-T Trip 3/a/usi (Disrete/)
T3144/C Ouertemp Delra-T Trip3Statas (Discret/e)
TS/4423 Lows-Lowu Taog P-12 Trip 3/a/us (Diserete)
TS/442G Lore Tape Pererwa/er salr Trip  TS/4420(Disreter)
PS/5/64 310 2 Leew 3/relie press Trip 30/tus (Discre/e)
PS/516C 3102 Steareline Press HI Regetive 1/are Trip 3/a/us j (Disceret)
P3/34/s/ 310 3 Lure stmrine Press Trip 30/tus (Discrete)
P31346 /03 3/Searnline Press Hi Rrgeanur Rare TripS/a/so (Disceret)
LS/5t 7A 3/01 HI-Hi P-14 Trip L313/PA(Discrete)
LS/5I7B 310 1 Lere-Lew Level Trp 30/tus (Disretre) 3/0 2 Hi-Hi P-/4 Trip 3/a/uso (Disreere)
P5/527B 313 2 Lerw-Lee Level Trip 3/a/usoJ (Disreere) 3103 3/H4-4 P-/A4 Trip 3/a/us L31337A(Oree 310 3 Lreu-/ow Level Trip S/a/us L31537B (Dsisrere)
J L31347A 3/0 4 H1-Hi P-t4 Trip 3/a/us St/04 Lew-Lsaw Level Trip S/a/us L315A76 (Disrete/e p2..PS2_A/L_18/
Analeg Lrep Input Puoeer Supply Feilure Relay l Mnalos Leap lnput Puwer supp~ly Failure Relay PS7SFA/L )8 Disret/e) l PS333.FAILJ.1 Diserete Leop lrpu/ Poerso suppip/ Palfure Relay I (Disreter)
P36SF/i/L t8 Disuretn Lssp Input Pweree Supply Frilurn 1/clap 1 2 Dl P01/ /8Less ef Peower 0o D/i/ial 10nput Card (Discrete)
LC-5/PB 3/0 1 Leow-Leer Level Trip, AFW Pump S/as (Disceree)
LC-82PA 310 2 HI-Hi Tatb Trip, Feedwea/er (sir, P-lA4 (Discuete)
LC-52P8 310 2 Law-Low Level Trip. APW Pump 3/art LO-537A 310 3 Hi-Hi Tvu/n Trip, Fededater Ilonr P-14 (Dioce H)LC-53PB S/G03 Lore-Lore Level Trip, AFW Pump 304rt (Devcrte)LC-547A 310 4 Hi-Hi Tutu Trip. FeedweatertrIof, P-/4 (Discrete)
LC-5478312G4 Law-Leer Level Trip. APW Pump 3tat5 I IDiuscrete it I-nks F/net Process Protection System Interface Requirements Specification Revision:
9 Page 48 of 78 Figure 1-21 Replacement PPS Architecture 
-Set IV Non-Safety-Related Tricon Chassis PPS Protection Set IV o ..... t t t Links Fiber TM-442F Tayg I 14ILUN REMOTE RXM (4-20 nmA)TM-441 G Cverternp Setpoint TS/441H Overpowrer Delta-T Interlck 04 Manual Trip Swcich (Discrete)
TS/441D Overtenmp Delta-T Interlock C3 Manual Trip Swritch (l~iscrete)
PSOFI_8 Class nI Ano Powrer Supply Failure Relay _P2 _FAL1 (Discrete)
P85N_FAIL_18 Class II AnaleS Feorer Supply Falure Relay (Discrete)
PS3NFAIL_18 Isolator Power Supply Failure Relay .(Discrete)
PORNFAIISIsolator Power Supply Failure Relay PS6NFDILcteta.
(4-20 rnA)3 (4-20 rmA)TM-441E Delta-T (4-20 renA)TM-454A PZR Vaper Terrr (4-20 renA)TO-441 H Overpowuer Delta-T Interdool 04MCR, P0S5-n-MCR-D' MCR-p.- MCR, PC5RNARA-eMAS (Discrete)
TC-441D Overternrp Delta-T Interlocks 03 (Discrete)
PC-SIRS S/G t Steanrnlne Lown Pressure Alarrr (Disereta)
C-54BS/ SemlnMAwSesue lr (Discrete)
LY-517H DIG Leaw-Leaw Level TTD Tierer Actuated (DIscrete)
A UY-PS4ATRICON Frotectiun Set IV Trouble Alarrr (DIscrete)MA UY-PS4BTRICDN Protection Set IV Channel BY'P Alarmo (Discrete)MA UY-PO4C TRICON Protection Set RTD Failure Alarrrr dMA (Discrete)MA t= AS (Discrete)
PC-405B Pressure High RHR Not lsolated Alanrr (DIscrete)
MAS PROT SET IV TRICON MAINTENANCE WORKSTATION COMPUTER Tricon C WonderWare Data Link.. Set IV ] IProt Set IVKVM HMl Peripheral Prot Set IV ALS SwthDeie MWO Cortputer wth eie*Keyboard* Vtdeo Display SMouse a Touchscreen
* Prdnter Process Protection System Interface Requirements Specification Figure 1-22 Revision:
9 Page 49 of 78 ent PPS Non-Safety-Related Communications Architecture 55-522 Ce, *0ro, M.S.----
A")'5o i.5 ALS "APmlS A "S8..... P rALSWB.....-, ProSS.)V ALS "W From P'n S..I (Typ 05 2)* Mona T Ma,.P I Ta ALS B.s (TAR)PhyMca dmo~ctd when rol Anu (Ty 50. ,ALS " wA" AL)) l5t),\ /Prot Set I Tow RS-,a85 I0 OeA tT A".05 ALS T)'Ft"iIU LLJJIIUI1
____ ._Prot Se.t 1 c,,.))Remstu PXM Legend: Muir-Mode Optca Fibe"r- --.. RS,-422JRS,-485 Seuial or l00BaseT Copper o f lf.......
aomA Aunao CopperConnecl~oo Process Protection System Revision:
9 Interface Requirements Specification Page 50 of 78 2 Interface Requirements This section specifies the requirements imposed on the systems, subsystems, configuration items, or other system components to achieve required interfaces among these entities.2.1 Process Interface Requirements The I/O List [Appendix 4.1 through Appendix 4.4] describes process inputs and outputs for the PPS replacement project. The I/O list contains the following information for each protection set. As noted below, some I/O list information is outside the scope of this interface specification.
2.1.1 I/O Power Supplies 1. Separate power supplies will be provided by PG&E for Triconex analog and digital I/O per the Triconex qualification.
: 2. All Tricon discrete inputs and outputs will be powered by PG&E in accordance with the requirements provided in the l/O list.3. All ALS discrete inputs and outputs will be wetted by 48 Vdc supplied by PG&E.4. The Pressurizer pressure channels are shared among the ALS, Tricon, and the control system, via qualified isolator modules, and will be powered by the Tricon ETP as shown in Figure 2-3.5. Deleted 6. All 4-20 mA analog input signals are powered from power supplies located within the PPS cabinets.
The 0-10 VDC analog signals from the Nuclear Instrumentation System (NIS) are powered by the NIS.7. PG&E will provide analog loop power supplies.
Analog input loop power supply voltage should not exceed 40 Vdc, and may be as low as 24 Vdc based on the following considerations and assumptions:
: a. Rosemount 1154 and 1154 Series H 1) Max qualified power supply voltage: 45 Vdc 2) Max Design loop resistance at 45 Vdc input: 1575 ohms 3) Mmn Design loop resistance at 45 Vdc input: 500 ohms 4) Max Design loop resistance at 24 Vdc input: Approx. 700 Ohms 5) Min Design loop resistance at 24 Vdc input: 0 Ohms b. Rosemount 1153 Series B&D Output Code P 1) Max qualified power supply voltage: 40 Vdc 2) Max Design loop resistance at 40 Vdc input: 1325 ohms 3) Mmn Design loop resistance at 40 Vdc input: 500 ohms 4) Max Design loop resistance at 24 Vdc input: Approx. 600 Ohms 5) Min Design loop resistance at 24 Vdc input: 0 Ohms c. Rosemount 1153 Series B&D Output Code R 1) Max qualified power supply voltage: 45 Vdc 2) Max Design loop resistance at 45 Vdc input: 1575 ohms 3) Min Design loop resistance at 45 Vdc input: 500 Ohms Process Protection System Revision:
9 Interface Requirements Specification Page 51 of 78 4) Max Design Loop Resistance at 24 Vdc input: Approx. 700 ohms 5) Min Design Loop Resistance at 24 Vdc input: 0 ohms d. Barton 763 max power supply voltage: 50 Vdc e. Barton 763 Max loop resistance at 40 Vdc input: Approx. 1250'ohms f. Barton 763 Mmn loop resistance at 40 Vdc input: Approx. 190 ohms g. Triconex 3805N Analog Output module OVP: 42.5 Vdc h. ALS input resistance is 200 ohms [Figure 2-2] with both "A" and "B" 302 connected in series (i.e., Rs = 100 ohms).i.Triconex 9792-610N Reg. Guide 1.180 FTP Approx. input resistance:
: 1) When powered from the FTP (max 48 Vdc supply): (250 + 1/(1/250 +1/3300)) = 482 ohms ~500 ohms)2) When externally powered: 250 ohms (i.e., temperature signals from the ALS)j. Resistances of external loop devices are (PG&E scope): 1) Isolator input 4-20 mA into 100 ohms (estimated)
: 2) Westinghouse VX-252 indicator:
5 ohms (including estimated wire resistance)
: 3) ERFDS: Loop-Specific (Usually 250 ohms or 50 ohms)4) RVLIS: 250 ohms k. ALS 4-20 mA analog outputs are powered by the ALS. Therefore,-
temperature inputs to the Tricon shall not use the Positive Temperature Coefficient (PTC) thermistor for loop overcurrent protection and the input resistance for Tricon temperature inputs is 250 ohms.8. Tricon Analog Output Power Supply a. Analog outputs in the safety-related Triconex Main Chassis will be powered by redundant 24 Vdc power supplies furnished by PG&E.b. Analog outputs in the non-safety related Triconex Remote RXM chassis will be powered by redundant24 Vdc power supplies furnished by PG&E and mounted in the rack housing the RRXM chassis.c. Deleted.2.1.2 Analog Inputs Figure 2-2, Figure 2-3, and Figure 2-4 illustrate typical PPS analog input signal wiring[1.4.5.6, 1.4.5.7]: 1. PT-455 signal shared among Tricon (DTT-IA functions), ALSA, ALS-B and an isolation device 2. LT-459 Signal shared among Tricon, ControBad ad an  device 3. PT-5OS signal shared among the Tricon, and an isolation device 4. RCS Temperature signals are conditioned by ALS-A and ALS-B, respectively before they are input to the Tricon. Example wiring for these signals is shown in Figure 2-3.5. Tricon Al card type 3721N shall be configured for 14-bit resolution, unipolar.These cards are used for all 4-20 mA analog inputs to the PPS*6. Tricon Al cards 3703E (where used) and 3703EN shall be selected for 0-10 Vdc input, fail downscale.
These cards are used for Nuclear Instrumentation (NI)inputs to the PPS.
Process Protection System Revision:
9 Interface Requirements Specification Page 52 of 78 7. Signals from redundant field devices shall be processed on separate input boards (Not applicable to ALS).2.1.3 Discrete Inputs Signals from redundant field devices shall be processed on separate input boards (Not applicable to ALS).2.1.4 Discrete Outputs Figure 2-5 and Figure 2-6 illustrate typical ALS discrete output signal wiring that implements the diversity architecture 
[Figure 1-1] using a Line Sense Module (LSM)to provide a hardwired OR configuration between Diversity Groups ALS-A and ALS-B and to enable the ALS to perform continuous error checks.Upon detecting the following conditions, noted actions shall be taken: 1. Failure to Trip on Demand Close ALS Failure contact 2. Trip without Demand Close ALS Trouble contact The LSM is illustrated in Figure 2-1. Configuration of the LSM for use in an Energize to Trip (ETT) or Deenergize to Trip (DTiT) circuit is done through field wiring terminations on the LSM and does not require any modification of any electrical properties of the LSM itself. Thus, a single LSM can be used in an ETT or DTT circuit without the need to electrically configure the module for the trip circuit type before use. This allows a single part number to be used to provide spares for both ETT and DTT circuit configurations.
Refer to the ALS System Design Specification 
[1.4.5.6]
for additional information regarding the LSM and field wiring interface.
Process Protection System Interface Requirements Specification Revision:
9 Page 53 of 78 Figure 2-1 LSM Functions S Feedback to Feedback to-9L. .ALS0-BD Fernm ALB-402-A DOhEIE Fram Bypass From ALS-402-B DO 3EEI From Byposs Switeh B-~To BBFB/RNASA Process Protection System Interface Requirements Specificaition Revision:
9 Page 54 of 78 Figure 2-2 Typical ALS Analog Input Wiring FOR INFORMATION ONLY 74x PT-937 Containment P'ressure Prot Set]Rosemnount 1154 P -937 Containment P ,essure Pint SetI VB1 En-En mono ALS-A lonExteomal Current I 3 Shunt Mode ALS 321 Card BS Eut emat current Shunt Mode DIN Rail Terminal Board with Disconnect Notes: External shunt resistor Rn across ALS En and An terminals allows Al card to be removed without interrupting the 4-20 mA field circuit.Exomple (Informati on Only): Colculate Rs for 0.4- 2.0 VDC Input (4-20mADC)
I t 1 too 260K R-n'Rs = (6Kto"260K -too0 R~s = 100.03850 Process Protection System Interface Requirements Specification Revision:
9 Page 55 of 78 Figure 2-3 Typical Tricon Analog Input Wiring FOR INFORMATION ONLY PRESSURIZER PRESSURE TRANSMITTER PT-ASS TO ALE-A PT-ASS Input TO ISOLATOR PM-4SS_1 PRESSURIZER LEVEL TRANSMITTER LT-4SS TO INOICATOR U-AURA (VB2)TO INDICATOR U-459B (HBSP)TO ISOLATOR LM-459 t TURBINE IMPULSE PRESSURE TRANSMITTER PT-S0S T"O AMUAC ISOLATOR PM-SUN_1 WR HOT LEO TEMP LOOP I FRO M ALS-A TE-4I3A WR HOT LEO TEMP LOOP 2 PROM ALS-B TE-423A TB k I ~ In I ~ I'I ~ I'I In I I PNL MODEL zizi Tmt ETP1 (For 3721N A!) ~ JI , JP1(T+)I. _ T-)_ _ (T-)(T+)C T-).--- (T-).. -- (A),. -- (T-)k, _ (A)J4 J3 J2 oPT455 DaDE5 oP4NJP1 aPUSJP3 oT415
* JP4 aTAN .JP5 (T+) -JPI6-PS(+)Supply 1 L __ PS(-)Anal~oP Loo --- P)-TBO Notes:* PT-455, PT-5O5, and LT-45R are powered by the Tricon ETA.* The TE-413A atnd TE-423A RTD olgoals ore conditioned by the ALE before they are iniput to the Tricon sod provided to the Tricon as 4-20 mA analog signals. They are powered by the ALE, eoternally from the Tricon ETA.*The OCPP EPE NIE inpu) signals ame S-IS VDC and will stilize a S703EN Al card and 97E3-I10NJ ETA*on not retnove Jumper JP-I7 when usning thre R792-61ONJ with the 3721 N A card.S IN Rail Terinalne Boors with Disconnect Process Protection System Interface Requirements Specification Revision:
9 Page 56 of 78 Figure 2-4 Tricon/ALS PT-455 Interface Wiring FOR INFORMATION ONLY TRI CON TB IPRESSURIZER PRESSURE / E'TRANSMITTER PT-455 ()O OT+To ALS-A PT-455 Input  E+, E- " y " _'ToISOLATOR PM-45_1 " X __+, DIN Rail Terminal Board with Disconnect
+-i.ALS ALS 321 Card'A" TB External Current Shunt Made From Tricon \" An An 1K TR External Current Shunt Made En l En 251(nlkl ~nilT~rmn~lnn An with Disconnect Note:* Rs allows ALS-321 card to be removed without breaking the 4-20 mA field circuit.
Process Protection System Revision:
9 Interface Requirements Specification Page 57 of 78 Figure 2-5 ALS-A and ALS-B SSPS Connections (Deenergize to Trip Configuration)
FOR INFORMATION ONLY Note: LSM A and LSM B are parts of a single LSM.
Process Protection System Interface Requirements Specification Revision:
9 Page 58 of 78 Figure 2-6 ALS-A and ALS-B SSPS Connections (Energize to Trip Configuration)
FOR INFORMATION ONLY Process Protection System Revision:
9 Interface Requirements Specification Page 59 of 78 2.2 Safety-Related ALS/Tricon Interface Requirements
: 1. ALS shall provide 4-20 mA analog Temperature channel inputs to Tricon [Refer to Section 1.5.5.4 for scaling information].
: 2. ALS 4-20 mA output signals shall be powered by ALS 2.3 Data Communication Interface Requirements As shown in in Figure 1-22, the Tricon portion of the PPS replacement will utilize two TCM cards in each main chassis (Slots 7L and 7R), as well as two Media converters, two Port Aggregator Network Taps, and two sets of associated media. This arrangement provides two non-safety-related communication paths to the MWS and the PPC Gateway Computer from each Protection Set to ensure continued communications if a Single non-safety-related communication component fails.2.3.1 The PPS shall provide Non-Safety-Related Communications from Tricon to Port Aggregator Tap "A" (2-way)2.3.1.1 Hardware:
100BaseT Ethernet optical fiber to copper media converters (2).Supplied by Triconex.2.3.1.2 Media: 100baseT Ethernet optical fiber from TCM1 and TCM2 to media converters.
Supplied by Triconex.2.3.1.3 Hardware:
Net Optics PA-CU 10/l00BaseT Port Aggregator Taps (2).Supplied by PG&E.2.3.1.4 Media: I100BaseT Ethernet copper from Media Converter to Port Aggregator Tap. Supplied by PG&E.2.3.1.5 Data Interface Protocol:
Triconex Standard Ethernet NET2 2.3.2 The PPS shall support Non-Safety-Related Communications from Port Aggregator
*Tap "B" to Tricon Maintenance Workstation Computer (2-way)2.3.2.1 Hardware:
Unmanaged Ethernet switch. Supplied by PG&E.2.3.2.2 Media: 100baseT Ethernet copper 2.3.2.3 Data Interface Protocol:
Triconex Standard Ethernet NET2 2.3.3 The PPS shall support Non-Safety-Related Communications from Port Aggregator Tap "1" to Gateway computer (One-way)2.3.3.1 Hardware:
See Section 2.3.1.1.2.3.3.2 Media: 100baseT Ethernet + network hub supplied by PG&E 2.3.3.3 Data Interface Protocol:
Ethernet-based.
2.3.4 The PPS shall include a unidirectional RS-422 Non-Safety-Related Communication.link from each ALS chassis to the ALS Maintenance Workstation as follows: 2.3.4.1

== Description:==

Core Logic Board communication channel TxB2 2.3.4.2 Media: RS-422 twisted pair copper to maintenance workstation 2.3.4.3 ;Data Interface Protocol:
TxB1/TxB2 Data Packet [Reference1 
.4.5.9, App A;1.4.5.10, App A]2.3.4.4 Data transmitted via TxB2 shall display operational information including but not limited to:
Process Protection System Revision:
9 Interface Requirements Specification Page 60 of 78 1. Analog input and output values 2. Compensated analog values (e.g., LEAD/LAG PZR Pressure)3. Discrete input state (i.e., ON, OFF)4. Comparator input real values 5. Comparator raw output state (i.e., tripped, not tripped)6. Channel Status (i.e., normal or OOS)7. Discrete output state (i.e., ON, OFF)8. Channel bypass status (i.e. bypassed or not bypassed)9. LSM feedback status (i.e., ON, OFF)10. Power supply status 11. TAB connection status 12. Alarm status; (i.e., active, clear)13. Channel integrity status 2.3.5 The PPS shall include a bi-directional RS-485 Non-Safety-Related Communications link from each ALS chassis Test ALS Bus (TAB) to the ALS Maintenance Workstation (physically disconnected when TAB is not in use) as follows (Refer to Figure 2-7 for TAB communication interface connections):
2.3.5.1

== Description:==

TAB interface with ALS chassis 2.3.5.2 Media: RS-485 twisted pair copper.2.3.5.3 Data Interface Protocol:
TAB [Reference 1.4.5.10, Section 5.2]2.3.6 The PPS shall include a unidirectional RS-422 Non-Safety-Related Communications I link from each ALS chassis to the Gateway Computer as follows:I 2.3.6.1

== Description:==

Core Logic Board communication channel TxB1 2.3.6.2 Media: RS-422 twisted pair copper to Gateway computer 2.3.6.3 Data Interface Protocol:
TxB1/TxB2 Data Packet [Referencel1.4.5.9, App A;1.4.5.10, App A]2.3.6.4 Data transmitted on TxB1 shall be identical to the data transmitted on TxB2.2.3.7 Keyboard, Video Display, and Mouse (KVM) Switch 2.3.7.1 The KVM switch provided by PG&E enables sharing a video display and USB HMI peripheral devices between multiple computers.
: 1. The KVM switch shall enable the Tricon MWS computer and the ALS MWS computer to be controlled from one single KVM console per protection set using analog VGA video links to a single VGA monitor.2. The KVM switch shall permit only connections between the video display and USB interface devices and the single selected computer.Connection between the computers or to multiple computers shall not be..... :ted----J__!___
__I__IIL_
___ ____U.3. The USB HMI peripheral devices controlled by the KVM switch are limited to: a. Keyboard b. Mouse c. Touchscreen interface device\
Process Protection System Revision:
9 Interface Requirements Specification Page 61 of 78 d. Printer Printer functionality shall be limited to simple printing via hardwired USB interface only..4. The KVM Switch supports switching the video display and HMI interface devices between the connected computers via the following means: a. Keyboard hotkeys b. Front panel switch'c. Mouse button 5. The KVM switch enables mouse and keyboard input devices to be switched instantaneously and reliably between the connected computers without requiring the devices to be enumerated upon transfer.
Item 7, below explains enumeration.
: 6. The KVM switch includes two independently switchable, enumerated USB channels for other devices. The first channel (USB1) shall be used for the Touchscreen interface device. The second channel (USB2) shall be used to connect a printer to the workstation to support calibration, maintenance and surveillance test operations.
: 7. The independently switchable USB channels provide enumerated switching, which requires the connected USB device to perform a full initiation process (i.e., enumeration) every time it is switched.
The enumerated switch shall pass signals straight through the switch between the USB device .and the computer without interpretation.
: 8. The switch utilizes the default switching mode, in which the video display, keyboard and mouse and the enumerated USB ports are all switched together.9. (deleted)10. The PPS replacement application will not utilize the audio interface.
: 11. PG&E will provide multiple KVM stations for the DCPP PPS Replacement application, one per protection set.2.3.7.2 Media: Copper 2.3.7.3 Data Interface Protocol:
USB, Analog VGA 2.4 System Power Supply 2.4.1 I/O Power Refer to Section 2.1.1 2.4.2 Tricon System Power Supply The Tricon portion of the PPS replacement will use the standard Triconex V1 0 AC power distribution design. An external independent vital 120 VAC 60 HZ power source will be provided by PG&E for each Protection Set. The single vital 120 VAC source for each Protection Set will be connected in parallel to the dual input power suppiy foreach-Tricon "vi0 Proi~ection SeL:Power fiiters-wiii reduce conducted noise to acceptable levels in accordance with USNRC Regulatory Guide 1.180, Rev 1.2.4.3 ALS System Power Supply The ALS "A" and ALS "B" chassis in each Protection Set requires two safety related sources of 48 VDC power for the ALS chasses and the individual boards within the chasses. The power supplies and 120 VAC sources are provided by PG&E.
Process Protection System Revision:
9 Interface Requirements Specification Page 62 of 78 2.5 Instrument Power Supply Locations To be determined by detailed design.2.6 System Power Sources Provided by PG&E 2.6.1 The following power sources are available for the Process Protection System: 2.6.1.1 120 Vac vital instrument power [1.4.4.7]:
Voltage: 120V +/-10%Frequency:
60 HZ +/-5%2.6.1.2 Non-safety-related 120 Vac utility power 2.6.2 Harmonic Distortion Limitations PG&E practices power supply quality monitoring.
As-found and as-left Total Harmonic Distortion (THD) measurements will be performed on power supply at PPS 120 Vac power supply input terminals before and after installation of equipment powered from the 120 Vac vital instrument power supply. Refer to USNRC Reg.Guide 1.180 [1 .4.3.3].2.7 Workstations 2.7.1 Maintenance Workstations Separate and independent Maintenance Workstation computers are provided for the Tricon and ALS subsystems in each Protection Set to allow independent processing and display of information from both Triconex and ALS portions of the PPS.2.7.1.1 The Tricon shall interface (2-way) with the HMI application in the Tricon MWS computers.
The TS1131 PPS application contains function blocks that allow WRITE-access to a limited set of parameters programmed into the application software with the Tricon keyswitch in the RUN position.
Without these function blocks programmed into the application program parameters cannot be modified with the keyswitch in the RUN position.The unmanaged Ethernet switch shown in Figure 1-22 between each port aggregator network tap Port B and the two Tricon MWS computer network interface ports in each Tricon MWS computer will be provided to ensure continued Tricon multicast operation in the event of MWS network communication failure.2.7.1.2 The ALS-A and ALS-B interface (1-way) shall communicate concurrently with the HMI application in the ALS MWS computer via the isolated TxB2 RS-422 data link [2.3.4].2.7.1.3 The two MWS computers in each Protection Set will share peripheral devices through a KVM switch. Refer to Section 2.3.7 for details.2.7.2 ALS Service Unit Application Software 2.7.2.1 The ASU software application shall be provided by Westinghouse to run on the ALS Maintenance Workstation.
2.7.2.2 The ASU application utilizes a two-way RS-485 communication link to communicate with the Test ALS Bus (TAB) that is physically disconnected from the MWS computer when it is not in use [2.3.5].
Process Protection System Revision:
9 Interface Requirements Specification Page 63 of 78 2.7.2.3 The activation of the TAB via connecting the TAB data link to the MWS computer shall not interfere with the ability of the ALS safety channels to perform their respective safety functions and the ALS shall remain operable during activation of the TAB.2.7.2.4 Capability shall be provided to place Individual channels in bypass from the ASU for maintenance and the non-bypassed channels in the ALS chassis shall continue to be operable with respect to their safety function.2.7.2.5 The TAB from ALS Chassis "A" and Chassis "B" will be provided with individual RS-485 ports on the ALS MWS computer.2.7.2.6 The ASU application shall ensure that the correct TAB is connected to the respective MWS RS-485 port.Note: To detect the TAB connection, the ALS-1 02 Dl 2 needs to be connected to ALS-1 02 'Input. Rtn as shown in Figure 2-7 [Reference 1.4.5.8, Figure 4-2].2.7.2.7 The ASU application shall provide passive system status display(s) ) of the information listed in Section 2.3.3.4 using one-way ALS-102 RS-422 Transmit Bus TxB2.2.7.2.8 The ASU passive system status display(s) shall function without the TAB being connected.
2.7.2.9 The ASU application shall include the capability to modify adjustable parameters (comparator setpoints, calibration coefficients, and tuning constants).
2.7.2.10 The capability to modify adjustable parameters shall be available only via the TAB when the TAB is connected.
2.7.2.11 The ASU application shall provide functions specified in the FRS that support periodic surveillance testing, including calibration requirements per Sections 2.9.6.1 through 2.9.6.5 of this specification.
These functions include, as a minimum: 1. Set comparator outputs in the energized or deenergized state, independent of the application demand, 2. Force other discrete outputs (such as alarms) to the open or closed state independent of the application demand.3. Force analog input or output values independent of the input signal or application demand.2.7.2.12 The ASU application shall be compatible with a Microsoft Windows XP (SP3 or later) operating system.2.7.2.13 The ASU application shall include capability to log: 1. Tunable parameters
: 2. Setpoints 3. System diagnostic alarms 2.8 Alarm Interface Requirements The PPS shall provide the following alarm output signals from each Protection Set for connection to the Main Annunciator System (MAS) in the DCPP Main Control Room (MCR). Separate signals shall be provided for these alarms from each Protection Set per Section 3.2.1.5 of the FRS [1.4.4.2].
Process Protection System Revision:
9 Interface Requirements Specification Page 64 of 78 2.8.1 PPS Failure (Deenergize to Alarm with Reflash capability implemented in PPS)The conditions listed in FRS Section 3.2.1.5.1 provide signals to initiate the PPS Failure alarm in the Main Control Room. In event of conflict with FRS Section 3.2.1.5.1 this Specification shall prevail.2.8.1.1 The TsAP alarm associated with the failure of both critical analog input power supplies or the failure of both critical analog output power supplies shall be suppressed if there is a loss of power to the digital input card[Section 2.8.2.3] associated with the power supply alarm inputs.2.8.1.2 ALS temperature input and output channel integrity failure shall not activate the PPS Failure alarm contact.1. The channel integrity status shall be provided in the TxB1 and TxB2 data streams [2.3.4 and 2.3.6]2.8.2 PPS Trouble (Deenergize to Alarm with Reflash capability implemented in PPS)The following platform-specific inputs to the Main Control Room PPS Trouble Alarm shall be provided in addition to those listed in FRS Section 3.2.1.5.2.
Other alarms not listed here or in the FRS may be provided to meet platform diagnostic requirements.
In event of conflict with FRS Section 3.2.1.5.2 this Specification shall prevail.2.8.2.1 Controller keyswitch not in RUN condition detected (Tricon only)2.8.2.2 TAB communication enabled (ALS Only).2.8.2.3 Loss of power to the digital input card (See Figures 1-5, 1-10, 1-15, 1-20).2.8.2.4 The TSAP alarms associated with the failure of a pair of primary and secondary non-critical power supplies, or the failure of a single power supply shall be suppressed if there is a loss of power to the digital input card[Section 2.8.2.3] associated with the power supply alarm inputs.2.8.2.5 ALS temperature input and output channel integrity failure shall not activate the PPS Trouble alarm contact.1. The channel integrity status shall be provided in the TxB1 and TxB2 data streams [2.3.4 and 2.3.6]2.8.3 PPS Channel in Bypass [Energize to Activate with Reflash capability implemented in PPS]The following ALS discrete output signals shall be provided in addition to those listed in FRS Section 3.2.1.5.3.
2.8.3.1 For deenergize to trip circuits, the PPS Channel in Bypass contact shall be activatedif the output circuit is energized as detected by the LSM; and: 1. The ASU is used to place any ALS channel within a specific ALS chassis in Bypass status: o~r 2. The output to the SSPS from any ALS channel within a specific ALS chassis is bypassed using the manual bypass switch [Section 2.9.6.7.8]
2.8.3.2 For deenergize to trip circuits, the PPS Channel in Bypass contact shall be activatedif the output circuit is not energized as detected by the LSM; and:.1. The ASU is used to place any ALS channel within a specific ALS chassis in Bypass status; or Process Protection System Revision:
9 Interface Requirements Specification Page 65 of 78 2. The output to the SSPS from any ALS channel within a specific ALS chassis is bypassed using the manual bypass switch [Section 2.9.6.7.8]
2.8.3.3 PPS Channel in Bypass contact shall be activated if any partial trip or other function associated with an ALS channel within a specific ALS chassis is placed in Bypass status from the ASU; that is, if a channel contains multiple partial trip outputs, the PPS Channel in Bypass contact shall remain active while any associated partial trip within a specific ALS chassis is in Bypass status.2.8.3.4 Deleted 2.8.4 PPS Channel Out of Service [Energize to Alarm with Reflash capability]
2.8.4.1 [For Tricon] Manual Channel Out-of-Service (COS) switches, where used, are provided with two (2) separate and independent output contacts.1. One contact satisfies PPS functional logic requirements per FRS Section 3.2.1 .5.5.b).2. One contact for use by the MAS, independent of the PPS per FRS Section 3.2.1.5.5.a).
2.8.4.2 [For ALS] The chassis "A" ("B") Out of Service output contact: 1. Shall be activated when any protection channel or function within the respective chassis has been defeated from the ASU.2. Shall reflash when a subsequent channel or function within the chassis is defeated while any other channel or function in the respective chassis is out of service.2.8.5 RTD Failure Alarm (MAS) [Energize to Alarm with Reflash capability]
Requirements for the RTD Failure alarm are provided in FRS Section 3.2.1.5.4.
2.8.6 SIG Low-Low Level TTD Timer Actuated Alarm Requirements for the SIG Low-Low Level TTD Timer Actuated alarm are provided in FRS Section 3.2.11.5.
Process Protection System Interface Requiremerlts Specification Revision:
9 Page 66 of 78 Figure 2-7 Typical TAB Communication Link Connection ALS BACKPLANE CONNECTOR ALS-102 CLB ISLOT 10 INPUT.C2<
INPUT.C2 P13-E6 J3 102-I.C2<-
INPU.R (3-E J3-102-1.E6TAB- 3 PI-A10 JII02-I.AI0 TA+ AB4- P1-All 11J-02-1.AII ALS BA CEPANEL CONNECTOR INPUT.C2 JI0-E6 IPIO-E6 <4 INPT.RN jP10-D5 TA+ AB YI1A2 PI Pl-A2 1 2 ASUCOMENABLED fl II2 INPUTr.RTN 
<2  TAB- 4 <TAB CONNECTOR TAB- RS45-STAB+TO MAINTENANCE TERM4 qp ALS BOARDS BACKPLANE PCB CABINET WIRING+ALS RACK Process Protection System Revision:
9 Interface Requirements Specification Page 67 of 78 2.8.7 For the Tricon alarm conditions identified in Section 2.8.7.3 time delay off shall be applied to the alarm in the TSAP so as to provide adequate time for the alarm to be transmitted to and logged by the MWS.2.8.7.1 A time delay off shall be applied to the alarm in the TSAP so as to provide adequate time for the alarm to be transmitted to and logged by the MWS.2.8.7.2 Unless otherwise specified, the initial time delay off shall be set to 5 seconds.2.8.7.3 Tricon Alarm Conditions
: 1. Input OCR (FRS 2.3.1.2)2. Failure to set Trip on Demand (FRS 3.2.1.5.1 a))3. Trip output set without demand (FRS 3.2.1.5.2 a))4. Loss of critical power supply (FRS 3.2.1.5.2 b))5. Loss of a non-critical power supply (FRS 3.2.1.5.2 c))6. Input deviation 
-SQA2 (FRS 3.2.1.5.4 a))7. Two bad inputs -SQA2 (FRS 3.2.1.5.4.b))
: 8. Less than two good inputs -SQA3A and SQA3B (FRS 3.2.1 .5.4.c))9. NI input open circuit (FRS 3.2.5.5.4 b))-1O. Thot input deviation (FRS 3.2.5.5.5 c))11. Loss of power to digital input card (IRS Section 2.8.2.3)2.9 Software Constraints and Requirements 2.9.1 Deleted 2.9.2 Deleted Process Protection System Interface Requirements Specification Revision:
9 Page 68 of 78 2.9.3 Tagname Convention 2.9.3.1 Deleted 2.9.3.2 ALS Service Unit (ASU)a. The tagname convention shown in Table 1 shall be used for display of PPS variables that are transmitted to the ALS MWS. (Tagnames are assigned in the ASU)b. The ALS MWS displays shall utilize the tagnames provided in the I/O List[Appendix 4.1 through Appendix 4.4].Table 1 Tagname Convention First Character Description a Scaled signal from analog input module c Discrete output points d Discrete input points e Enterable Analogs f Internal Discrete g Enterable Discrete_____ Integer values k Fixed Constant m Alarm / Trip Flag o Override Discrete (Not used in PPS)ov Override Value Real (Not used in PPS)p Pulse Inputs (Not used in PPS)q Quality Code DINT r Internal Analog Real w Raw Analog Input y Raw Analog Output 2.9.4 Deleted Table 2 Deleted Process Protection System Revision:
9 Interface Requirements Specification Page 69 of 78 2.9.5 Quality Codes A method shall be provided to identify the validity of data being transmitted to the MWS and external systems for the purpose of displaying the status of displayed information.
2.9.5.1 ALS Channel integrity information shall be included in the TxB1/TxB2 data stream.2.9.5.2 Tricon 1. Provide read-only Modbus aliased Quality Code tagnames for analog input variables.
The Quality Code (DINT) value shall be assigned per the following definitions:
Table 3 Quality Code Assignment Code Quality Description 0 Good; QC is Not 1, 2, 3,4, or 5.1 Not Used 2 Not Used 3 Not Used 4 COR; Instrument that is beyond the allowable scale.5 OOS; Instrument has been removed from service.2. The Quality Code for the individual RTD inputs to DTTA shall be set to 5 if DTTA is OOS or if the individual RTD is removed from service.3. The Quality Code for the Pressurizer Pressure input to DTTA shall be set to 5 if DTTA is OOS.4. The Quality Code for the Pressurizer Pressure input to DTTA shall be set to 4 if the OOR alarm condition is true as constrained by FRS Section 3.2.5.5.4 d).5. The Quality Code for the Power Range Flux inputs to DTTA shall be set to 5 if DTTA is OOS.6. The Quality Code for a Power Range Flux input to DTTA shall be set to 4 if the input is QOR or open circuit.Table 4 Deleted 2.9.6 On-Line Maintenance and Test Interface 2.9.6.1 The PPS shall provide capability for maintenance bypass during power operation; that is, the PPS shall permit th., c-apab.-,nility of_ an individual channel or channels to perform its protective action due to a requirement for replacement, repair, test, or calibration 
[GDC 211.2.9.6.2 The maintenance and test functions shall be accomplished without lifting electrical leads or installing temporary jumpers.2.9.6.3 The channel or channels subject to the maintenance bypass may remain in the bypassed condition within administrative time limits in accordance with Process Protection System Interface Requirements Specification Revision:
9 Page 70 of 78 DCPP technicai specifications established to meet the single failure criterion per IEEE-603-1 991 Sections 5.1 and 6.3.1.2.9.6.4 Capability to initiate protective action (i.e., to initiate partial trip or actuation) from an channel that has been removed from service for maintenance shall be provided per IEEE 603-1991 Section 6.3.2 and DCPP Technical Specifications.
2.9.6.5 Removing a PPS channel from ser~ice for maintenance shall not adversely affect the ability of channels in the same chassis that have not been removed from service to perform their safety function.2.9.6.6 Tricon PPS Subsystem Specific Requirements
: 1. Manual trip switches will be provided by PG&E on PPS partial trip and actuation outputs that de-energize to trip [FRS 3.2.1.3.4].
The switches may be used for SSPS input relay testing or to trip or actuate the channel manually if needed. Manual trip switches will not be provided for energize to trip outputs.2. On-lin testing shall be controlled by the safety-related Tricon processor enabled via a permissive from an safety-related hardwired manual Out of Service (OOS) switch.3. When the 008 switch is activated,-the safety-related function processor shall allow the associated channel to be taken out of service while maintaining the remainder of the Protection Set operable.
Features to limit inadvertently placing a channel OOS shall include, but not be limited to: 1. Aoproved PG&E procedures are reouired to perform testino operations.
: 2. Operation of the hardware OOS switch alone shall not place the channel out of service.3. More than one specific action shall be required at the Maintenance Workstation to perform the maintenance functions.
In order to perform any test operation from the maintenance workstation, the user must: (1) Activate the OOS switch for the specific ioop to be tested (2) Log in as a maintenance user on the maintenance workstation (3) Open the maintenance screen for the specific loop being testec (a) On the maintenance screen, request the desired test mode (b) On the maintenance screen, confirm the requested test mode (Loop logic in Tricon is placed OOS only after the requested mode is confirmed)(c) Deleted (d) Deleted (e) If it is desired to change the test mode, repeat steps 3.(a)through 3.(d) ........ u. ^k ... it -,..selecting a different test mode alone shall not cause or require returning the channel to service.(4) The channel shall return to service: (a) When the OOS switch is returned to its normal position; or (b) When so commanded from the MWS 4. Feedback is provided to the user on the maintenance workstation that the hardware OOS switch for the loop to be tested has been activated.
Process Protection System Revision:
9 Interface Requirements Specification Page 71 of 78 5. Continuous indication is provided in the control room that a loop is 00S.6. If the safety-related hardware out of service switch is not activated, non-safety-related actions or failures cannot adversely affect the safety-related function.7. A bistable is not permitted to be bypassed if the manual trip switch is in the trip position.
The MWS shall advise the user that bypass is not permitted and shall allow the user to test in trip in this condition following request and confirmation as described above.8. (For PC-505A and PC-506A Turbine Impulse Pressure to P-13) If a bistable is being tested in trip mode and the manual trip switch is closed and the manual bypass switch is placed in the BYPASS position: (1) The logic for the associated bistable(s) shall transfer to Test in Bypass immediately and without confirmation from the MWS.(2) If the manual trip switch is open, the logic for the associated bistable(s) shall not transfer to Bypass and MAS control room bypass alarm referred to in ERS 3.2.1.5.3 shall be suppressed.
(3) When the bypass switch is restored to the Normal condition with the manual trip switch closed, the bistable shall remain in Test in Bypass mode until (1) the channel is returned to service per 3.c.(4), above;or (2) the bistable test mode is changed per 3.c.(3), above.9. If a bistable is being tested in bypass mode and a manual trip switch is placed in the TRIP position, the logic for the associated bistable(s) shall transfer to Test in Trip mode immediately and without confirmation from the MWS.(1) When the trip switch is restored to the normal condition, the bistable shall remain in Test in Trip mode until (1) the channel is returned to service per 3.c.(4), above; or (2) the bistable test mode is changed per 3.c.(3), above.10. For deenergize to trip outputs, the PPS Trouble Alarm due to trip output set without demand shall be suppressed when the bistable is being tested in trip or bypass mode.11. For energized to trip outputs, the PPS Trouble Alarm due to trip output set without demand shall not be suppressed when the bistable is being tested in trip or bypass mode.12. PPS Failure Alarm due to failure to set trip on demand shall not be suppressed when the bistable is being tested in trip or bypass mode, except that the P-i13 Failure to set trip on demand MAS alarm shall be suppressed if the P-13 bistable bypass is initiated as in 2.6.6.3.h, above.4. Maintenance modes allowable under 3.c.(3) above shall include: 1. Test in Bypass: The bistable trip output is maintained in the untripped condition while in this mode; that is, Test in Bypass mode shall override the output of the channel trip comparator to prevent generation of a partial trip from the channel being tested.2. Test in Trip: The bistable trip output is mnaintained in the tripped condition while in this mode; that is, Test in Trip mode shall override the output of the channel trip comparator to initiate partial trip or actuation from the channel being tested.5. Parameter Update: Capability to update parameters such as trip setpoints or tunable parameters.
: 1. The parameter values to be updated are limited by the software application to pre-determined ranges.
Process Protection System Revision:
9 Interface Requirements Specification Page 72 of 78 2. The Maintenance Workstation software application shall request confirmation that the parameter update process is complete prior to saving the new tuning constant.6. Manual bypass switches will be provided per FRS Sections 3.2.1.3.6 and 3.2.1.5.3.
: 7. Alarm outputs from the Tricon to the MAS shall be testable.
If an OOS switch is placed in the OOS position, and a properly logged in user at the MWS commands a Test signal, the Tricon logic shall pulse the alarm output from the existing state to the opposite state for 3 seconds.2.9.6.7 ALS PPS Subsystem Related Requirements
: 1. ALS bypass and test functions shall be accomplished through the ASU application implemented in the ALS MWS as discussed in Section 2.7.2.2. Placing a specific channel in bypass from the ASU shall not affect the safety function of other channels in the same ALS chassis that are not subject to the same bypass.3. Placing an individual channel in bypass in one ALS chassis (e.g., Chassis "A")from the ASU does not affect the safety function of any channels in the diverse ALS chassis (e.g., Chassis "B) in the same protection set.4. It shall be possible to place multiple channels in bypass concurrently within an ALS chassis. However, placing multiple channels in bypass shall require individual bypass actions for each channel. It shall not be possible to place multiple channels in bypass by a single action from the ASU.5. The Test ALS Bus (TAB) must be physically connected to the MWS as shown in Figure 2-7 to allow two-way communications on the TAB between the ALS chassis and the MWS.6. The ALS-A and ALS-B chassis partial trip outputs are connected to the SSPS input relays through an LSM that allows either ALS chassis to initiate a trip or actuation without affecting the ability of the other ALS chassis to initiate a trip or actuation 
[Section 2.1.4, Figure 2-5, and Figure 2-6].7. The LSM shall not allow an ALS chassis to prevent the diverse ALS chassis from initiating a required trip or actuation.
: 8. Bypass switches on partial trip outputs, which allow removal of an ALS circuit board without initiating a false trip or actuation, will be provided by PG&E per FRS 3.2.1.3.5, 3.2.1,.3.6, and 3.2.1.5.3.
: 9. Trip switches on partial trip and actuation outputs, which allow a channel to be tripped manually, will be provided by PG&E per FRS 3.2.1.3.4.
: 10. Deleted.11. For deenergize to trip outputs, the PPS Failure contact closure due to bistable output failure to trip upon demand discrepancy shall be suppressed if a bypass is asserted from the ASU or from the manual bypass switch.12. Deleted 13. Deleted 14. The ASU shall be capable of storing 7 days of recent alarm log history. Oldest data shall be overwritten.
: 15. The ASU shall be capable of receiving data from both ALS Chassis A and ALS Chassis B concurrently.
: 16. PG&E will provide adm inistrative controls to prevent enabling the TAB on both ALS Chassis A and ALS Chassis B concurrently.
Process Protection System Revision:
9 Interface Requirements Specification Page 73 of 78 2.9.7 Maintenance Tagnames (Tricon Only)-Read-only memory aliased global tagnames shall be provided for the following to facilitate maintenance, operations, and testing.1. Calculated Trip Time Delay Setpoint (REAL)2. Preset Time (PT) input to TTD Timer (REAL)3. Trip Time Delay elapsed time when the TTD timer is activated 
-zero when the TTD timer is not activated (REAL)4. SG Low Low Level Input to TTD Timer 5. RCS Loop AT Equivalent to Power (PL: % RTP)6. Raw (i.e., before TiT and TiB processing) output status of all comparators (BOOL)7. Input to all Analog Output count conversion function blocks for display of output in engineering units (REAL)8. User entered Thot Streaming Factors used to calculate Tfhjest (REAL)9. Corrected Tfhjest values for the three SQA-3A Thot inputs for each RCS loop (REAL)10. Corrected Tfhjest values for the three SQA-3B Thot inputs for each RCS loop (REAL)11. Validated Tfhavg "A" value for the SQA-3A output for each RCS loop (REAL)12. Validated Tfhavg "B" value for the SQA-3B output for each RCS loop (REAL)13. Validated Tfhavg SQA-3 Output for each RCS loop (REAL)14. Validated Tfcavg SQA-2 Output for each RCS loop (REAL)15. Tavg for each RCS Loop (REAL)16. (For OTDT) Lead/Lag compensated value of Tavg for each RCS loop (REAL)17. (For OPDT) Rate/Lag compensated value of Tavg for each RCS loop (REAL)18. OTOT Setpoint for each RCS loop (REAL)19. OPDT Setpoint for each RCS loop (REAL)20. Process value inputs to OPDT and OTDT comparators for each RCS loop (REAL)21. LEAD/LAG compensated value of AT for each RCS loop (REAL)22. LEAD/LAG compensated Steamline Pressure (REAL)23. RATE/LAG compensated Steamline Pressure (REAL)24. Normalized Power (PB) (REAL)25. Pressure Compensated Steam Flow (REAL)26. Calculated Streaming Factors (FRS 3.2.5.13.10) output to MWS Process Protection System Revision:
9 Interface Requirements Specification Page 74 of 78 3 PPS Cyber Security 3.1 Secure Development and Operating Environment Safety-related PPS Application software shall be developed in a secure development and operating environment (SDOE) per Reg. Guide 1.152 Rev 3 [1.4.3.5].
3.2 Technical Controls This section is applicable to both the Tricon and the ALS Maintenance Workstations unless otherwise stated.3.2.1 Account Management 3.2.1.1 The Supplier should recommend which operating system accounts need to be active and those that can be disabled, removed, or modified.3.2.1.2 PG&E will approve the Supplier's recommendation in writing.3.2.1.3 Supplier shall identify all active accounts prior to delivery.3.2.2 Access Enforcement Authorizations for controlling access shall be in accordance with established policies and procedures 3.2.2.1 Privileged functions shall be defined and documented.
3.2.2.2 For a defined access right or level, Least Privilege assigns the most restrictive set of rights/privileges or access needed by users for the performance of specified tasks.3.2.2.3 A user shall not be able to escalate privileges, under any circumstances, without logging into the administrator or developer access level first.3.2.2.4 Documentation defining access and security permissions, user accounts, applications, and communication paths with associated access levels shall be provided.3.2.2.5 Access Levels 1. Access levels shall be job function (role) based with configurable access and permissions associated with the defined role 2. (Tricon MWS Only) At a minimum, there shall be four assigned access levels: a. GUEST Access limited to indication only screens; shall not be able to modify access level roles or passwords; shall not be able to acknowledge alarms. This access level does not require authentication.
: b. MAINT1 Access to all screens includingmaintenance screens; shall be able to remove and return channels to service except RTD channels that are input to DTTA; shall not be able to modify access level roles or passwords; shall be able to acknowledge alarms; shall be able to change the following tunable parameters.
This access level requires authentication.
: 1) Steam Flow adjustment factor (in) (FRS 3.2.9.14.1.g))
: 2) Full Power AT (FRS 3.2.5.14.7 n))
Process Protection System Revision:
9 Interface Requirements Specification Page 75 of 78 3) Full Power Tavg (FRS 3.2.5.14.7 o) & p))4) Thot Streaming Factors (FRS 3.2.5.14.7 gg))5) Thot Input Deviation Setpoint (DeltaH) (FRS 3.2.5.14.7 r))6) Delta I Coefficient (SCAL FLUX) (FRS 3.2.5.14.7 ii))c. MAINT2 Access to all Maintl screens or functions; shall be able to change comparator setpoints and tunable parameters; shall be able to remove and return channels to service; shall be able to remove from service and return to service RTD channels that are input to DTTA;may acknowledge alarms; shall not be able to modify access level roles or passwords.
This access level requires authentication.
: d. ADMINISTRATOR An Administrator access level shall be provided as the most privileged level with ability to change passwords.
This access level requires authentication.
: 3. (ALS MWS Only) At a minimum, there shall be four assigned access levels: a. GUEST: Access limited to indication only screens; shall not be able to modify access level roles or passwords.
This access level does not require authentication.
: b. MAINTi: Access to all screens including maintenance screens; shall be able to remove and return channels to service; shall not be able to modify access levels or passwords; shall be able to acknowledge alarms;shall be able to change the following tunable parameters.
This access level requires authentication.
: 1) RCS Flow adjustment factor (in) (FRS 3.2.2.14.2 a))2) RCS WR Temperature RTD coefficients (a, b, & c) (FRS 3.2.3.14.2 c), d) & e))3) RCS NR Temperature RTD coefficients (a, b, & c) (FRS 3.2.5.14.7 I1), mm) & nn))c. MAINT2: Access to all Mainti screens or functions; shall be able to change comparator setpoints and tunable parameters; shall not be able to modify access level roles or passwords.
This access level requires authentication.
: d. ADMINISTRATOR:
An administrator access level shall be provided as the most privileged level with the ability to change passwords.
This access level requires authentication.
: 4. Separation of functions through assigned access authorizations shall ensure independence in the responsibility and functions assigned to an access level.
Process Protection System Revision:
9 Interface Requirements Specification Page 76 of 78 3.2.3 System Use Notification 3.2.3.1 The Supplier shall supply a user configurable message on the display when the user logs on. This "System Use Notification" message should appear before granting system access to the user and should include: 1. The user is accessing a restricted system.2. System usage may be monitored, recorded and subject to audit.3. Unauthorized use is prohibited and subject to penalties.
3.2.3.2 The "System Use Notification" message shall remain on the display until the user takes explicit actions to log on or exit 3.2.4 Password Requirements Passwords shall be controlled and configurable per the following:
3.2.4.1 The Supplier should provide a configurable account password management system that allows for: 1. Capability shall be provided to support complex passwords.
: 2. Capability shall be provided to change passwords on a routine frequency.
: 3. Authority to change passwords shall be limited to the most privileged (i.e., the Administrator) access level.3.2.4.2 Password length and composition for authentication
: 1. Microsoft Security policies for length and complexity meet minimum requirements for definition.
: 2. Password shall ensure obscure feedback of authentication information (not transmitted in clear text) during the authentication process to protect the information from possible exploitation/use by unauthorized individuals.
3.2.4.3 Permitted actions without Identification or Authentication
: 1. Specific user actions (i.e., the Guest/Operator access level) that can be performed without identification or authentication shall be documented.
: 2. The Supplier shall identify the basis for such actions (adversely affecting safety, security, and emergency preparedness, etc.) to be performed without identification and authentication.
3.2.5 System Hardening System components and software should be configured only for the needs of the specification.
3.2.5.1 Supplier shall provide documentation of required applications, utilities, system services, scripts, configuration files, databases, other software and the apropiat c-onfigu rations, including firmware, revisions and/or patch levels for the associated system.1. Such documentation shall include all third party software used in the software, including all libraries, frameworks, components, and other products, whether commercial, free, open-source, or closed-source.
3.2.5.2 Supplier shall provide a listing of necessary ports and services required for normal and emergency operations.
Process Protection System Revision:
9 Interface Requirements Specification Page 77 of 78 1. The listing shall include an explanation or cross reference to justify why a service is necessary for operation and those services and programs that are necessary for operation are allowed.3.2.5.3 Supplier shall remove and/or disable software components that are not required for the operation and maintenance prior to delivery.1. Supplier shall document software components that were removed and/or disabled.3.2.5.4 Supplier shall document the changing or disabling of access to files and functions (if any).3.2.5.5 The operating system administrator shall have the ability to re-enable devices if the devices are disabled by software.3.2.6 MWS Startup Automatic Login 3.2.6.1 Upon boot up, the MWS computer shall automatically log into the required operating system account with no user interaction.
3.2.6.2 Upon boot up supplier software interfaces shall automatically log into the least privileged access level with no user interaction.
Process Protection System Revision:
9 Interface Requirements Specification Page 78 of 78 4 Appendices 4.1 Protection Set l11/0 List 4.2 Protection Set II11/0 List 4.3 Protection Set ill I/O List 4.4 Protection Set IV I/O List Appendix Notes Analo~q Inputs: (1) Not used.(2) Can be downgraded to IB,D,2 if properly isolated from IA equipment.
(3) Transmitter input of 4-20 mA to be converted by PPS hardware such that input card removal will not break transmitter loop continuity.
(4) Deleted (5) The "w" tagname is for the raw D/A count input (DINT); the "a" tagname is for the scaled input (REAL).(12) TE-454 is a thermowell-mounted 3-wire, 200 ohm platinum RTD.Analoq Outputs: (6) Deleted (7) From analog sensor input loop, isolation not required (8) Deleted (9) The "y" tagnames are counts to the D/A (DINT).(10) Signal is isolated to Class II via qualified isolation device.(11) Continuity supervision is not required for this ETT output to the PORV interlock in RNASA.
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 Qh~ 1,nf O r ,1SET I ANALOG INPUTS _____ i NT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) LCHANNEL FUNCTION iN TAG TYPE TE-413A 200 OHM RTD IB,A,1 0 -700 &deg;F Diverse-A A 5 1 311 (w)aTE413A A WRN Temp Loop 1 Hot Leg (for RTD conversion to mA)TE-413B 200 OHM RTD IB,A,1 0 -700 0 F Diverse-A A 5 2 311 (w)aTE413B A WRN Temp Loop 1 Cold Leg (for RTD conversion to mA)TE-410OB 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 3 311 (w)aTE41 08 A DTTA Loop 1 Tcold-1 (for RTD conversion to mA)TE-410A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 4 311 (w)aTE410A A DTTA Loop 1 Thot-lA (for RTD conversion to mA)-TE-411lA 200 OHM RTD IA 350 -650 =F Diverse-A A 5 5 311 (w)aTE411lA A DTTA Loop 1 Thot-2A (for RTD conversion to mA)TE-41 2A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 6 311 (w)aTE41 2A A DTTA Loop 1 Thot-3A (for RTD conversion to mA)FT-414 4-20 mA (3) IA 0- 100 XMTR dp% Diverse-A A 6 1 -321 (w)aFT414DP A Reactor Coolant Flow Loop 1 FT-424 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 __ 2 321 (w)aFT424DP A Reactor Coolant Flow Loop 2 __________
FT-434 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 321 (w)aFT434DP A Reactor Coolant Flow Loop 3 __________
FT-444 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A j A 6 4 321 (w)aFT444DP A Reactor Coolant Flow Loop 4 PT-455 4-20 mA 3) IA 1250 -2500 psig Diverse-A A 6 -5 321 (w aPT455 A PZR Pressure PT-937 4-20 mA (3) IA 55 psig Diverse-A A 6 -6 321 (w)aPT937 A Containment Pressure TE-423A 200 OHM RTD IBA,1 0 -700 0 F Diverse-B B 5 1 -311 (w aTE423A B WR Temp Loop 2 Hot Leg (for RTD conversion to mA)TE-423B 200 OHM RTD IA 0 -700 &deg;F Diverse-B B 5 2 311 (w)aTE423B B W/N Temp Loop 2 Cold Leg (for RTD conversion to mA)TE-411lB 200 OHM RTD IA 350 -650 0 F Diverse-B B ___ 5 311 (w)aTE4I18B B DTTA Loop 1 Tcold-2 (for RTD conversion to mA)TE-410C 200 OHM RTD IA 350 -650 &deg;F Diverse-B
__B __ 5 4 311 (w)aTE410C B DTTA Loop 1 Thot-lB (for RTD conversion to mA)TE-41 1C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 5 -311 (w)aTE411IC B DTTA Loop 1 Thot-2B (for RTD conversion to mA)TE-412C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 6 311 (w)aTE412C 8 DTTA Loop 1 Thot-3B (for RTD conversion to mA)FT-414 4-20 mA (3) IA j 0 -100 XMTR dp% Diverse-B
___B ___ 6 1 321 (w aFT414DP B Reactor Coolant Flow Loop 1 __________
FT-424 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B -6 2 321 (w)aFT424DP B Reactor Coolant Flow Loop 2 __________
FT-434 20 mA (3) IA 0 -100 XMTR dp% Diverse-B B ___ 6 3 321 (w)aFT434DP B Reactor Coolant Flow Loop 3 __________
FT-444 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 4 -321 (w)aFT444DP B Reactor Coolant Flow Loop 4 __________
PT-455 4-20 mA (3) IA 1250 -2500 psig Diverse-B B 6 5 321 (w aPT455 B PZR Pressure PT-937 4-20 mA (3) IA 55 psig Diverse-B B 6 6 321 (w)aPT937_B Containment Pressure NE-41A 0-10OVDC IA 0 -120 %Tricon T__ 2 1 3703EN (w)aNE41A DTTA~o LO 1 Upper (Neutron)
Flux NE-41 B 0-10 VDC IA 0 -120 %____ Tricon T -2 2 3703EN (w)aNE41 B DTTA Loop 1 Lower (Neutron)
Flux TE-413A 4-20 mA (3) IB,A, 1 0 -700 &deg;F Tricon 1 3 1 -3721N (w)aTE413A WRN Temperature Loop 1 Hot Leg TE-413B 4-20 mA (3) IA 0 -700 &deg;F Tricon 1 3 2 3721N (w)aTE413B V/N Temperature Loop 1 Cold Leg _______TE-410B 4-20OmA 3) IA 510 -630 &deg;F Tricon __1 3 3 3721N (w)aTE410B DTTA Loop 1 Tcold-1 TE-410A 4-20OmA (3) IA 530 -650 &deg;F Tricon 1 3 4 3721N (w)aTE410A DTTA Loop 1 Thot-lA TE-41 1A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 3 5 3721 N (w)aTE41 1A DTTA Loop 1 Thot-2A TE-412A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 ___ 3 6 3721N (w aTE412A DTTA Loop 1 Thot-3A PT-455 4-20 mA (3) IA 1250 -2500 psig Tricon ___1 -3 __7 3721N (w)aPT455 DTTA Loop 1 PZR Pressure FT-522 4-20 mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 3 6 3721N (w aFTF522DP Loop 2 Steamfiow o -4.5 MPPH Tdicon N/A NIA N/A N/A rFT522 Loop 2 Steamflow Compensated FT-542 4-20 mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 3 9 3721N (w)aFT542DP Loop 4 Steamfiow 0 -4.5 MPPH Tricon N/A N/A N/A N/A rFT542 Loop 4 Steamfiow Compensated PT-524 4-0m 3) IA 0 -1200 psg Tricon 1 3 10 3721N (w aPT524 Loop 2 Steamline Pressure PT-544 4-20 mA (3) IA 0 -1200 psig Tdicon 1 11 3721 N (w)aPT544 Loop 4 Steamline Pressure LT-529 4-20 mA (3 IA 0 -100 %Tricon 1 3 12 3721N (w aLT529 SIG 2 Level Tdicon 1 _ 3 13 3721N Spare ____________________
PT-S05 4-20 mA (3) IA 0 -110 %Tdcon 1 -3 14 3721 N (w)aPT505 Turbine Impulse Pressure Tnicon 1 3 15 3721N Spare ____________________
TE-423A 4-20OmA (3) IBA,1 --700 0 F Tricon 1 4 1 3721N (waTE423A 
/R Temperature Loop 2Hot Leg TE-423B 4-20 mA (3) IBA,1 -0700 &deg;F Tdicon 1 4 2 3721N (w)aTE423B V/N Temperature Loo 2 Cold Leg TE-411B 4-20 mA (_3) IA -510 -630 0 F Trbcon 1 4 3 3721N (w)aTE411B DTTA Loop 1 Tcold-2 TE-410OC 4-20 mA (3) IA 530 -650 &deg;F Tncon 1 4 4 3721 N (w aTE4100 DTTA Loop 1 Thot-1 B TE-41 1C 4-20 mA (3) IA 530-650 0 F Tricon 1 4 5 3721 N (w)aTE4I11C DTTA Loop 1 Thot-2B TE-412C 4-20OmA(3)
IA 530 -650 0 F Trdcon 1 4 6 3721N (waTE412C DTTA Loop 1 Thot-3B LT-459 4-20 mA (3) IA 0 -100 %Tricon 1 L[4 7 3721N (w)aLT459 PZR Level PPS Interface Requirements Specification, Rev 9 Appendix 4.1I ANALOG INPUTS _ _ _ _ _ _ _r SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) {CHANNEL FUNCTION-bneem zoi TAG TYPE FT-512 4-20 mA (3) IA (2) [ 0 -100 XMTR dp% Thcon 1 4 8 3721N (w)aFT512DP Loop 1 Steamfiow_______ 4.5 MPPH Tricon N/A N/A N/A N/A rFT512 Loop 1 Steamtlow Compensated FT-532 4-0mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 4 9 3721N (w)aFT532DP Loop 3 Steamfiow S______ _0 -4.5 MPPH Tricon N/A N/A N/A N/A rFT532 Loop 3 Steamfiow Compensated PT-514 4-20 mA (3) IA 0 -1200 psij Tricon 1 4 10 3721N (w aPT514 Loop 1 Steamline Pressure PT-534 4-20 mA (3) IA 0 -1200 psig Tricon 1 4 11 3721N (w)aPT534 Loop 3 Steamline Pressure LT-539 4-20 mA (3) IA0 -0100 %____ Tricon 1 4 12 3721N (w)aLT539 S/G 3 Level LM-459 1 20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level FM-512_1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow FM-512 2 4-20 mA IA (2) L NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow Compensated FM-522 1 4-20mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamfiow FM-522 2 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamfiow Compensated FM-532 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamfiow FM-532 2 4-20 mA IA (2) -NA NA __Isolator N/A N/A N/A N/A N/A Lo'op 3 Steamfiow Compensated FM-542 1 4-20mA IA (2) -NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamflow FM-542 2 4-20 mA IA (2) -NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamtlow Compensated PM-514 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamline Pressure PM-524 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamline Pressure PM-534 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamline Pressure PM-544 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure LM-529 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-539 1 4-20mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level LM-539 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level PM-505_1 4-20mA IA NA NA Isolator N/A N/A N/A N/A N/A Turbine impulse Pressure PM-455 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Pressure FM-4148 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 1 Normalized FM-424B 1 4-20 mA IA NA ___ NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-434B 1 4-20 mA IA -NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized FM-444B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 111/0311/1212013________
______________________
_________
________ __________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 PROTECTION SET I DISC.RETE INPUTS T ____ ,-uSet3o9 INSTRUMENT
__ SIGNAL TYPE I NST. CLASS PROCESSOR CHASSIS SLOT CARD TAGNAME CHANNEL FUNCTION TAG j TYPE FC-414 FB LSM A _ 48 VDC IA Diverse-A A 7 1 302 dFC414 LSMA Loop 1 Low Flow Rx Trp LSM A Feedback FC-424_PBLSMA 48 VDC IA Diverse-A A 7 2 302 dFC424 LSMA Laoo 2 Low Flow Rx Trip LSMA Feedback_FC-434_FB LSMA ', 48 VDC IA T Diverse-A A 7 __3 302 dFC434 LSMA Loop 3 Low Flow Rx Trip LSM A Feedback FC-444 FB LSM A 48 VOC IA Diverse-A A 7 4 302 dFC444 LSMA Loop 4 Low Flow Rx Trip LSMA Feedback _PC-455C PB LSM A 48 VDC j IA Diverse-A A 7 5 302 dPC455C LSMA PZR Press Low Rx Trip LSM A Feedback P0-455BFBLSM A 48 VDC IA __ Diverse-A A 7 6 302 dPC4558 LSMA Unblock SI, P11 LSM A Feedback PC-455APBLSM A L 48 VDC IA -Diverse-A A 7 7 302 dPC455A LSMA PZR Press High Rx Trip LSM A Feedback__
PC-455DFB LSM A 48 VDC IA Diverse-A A 7 8 302 dPC455D LSMA PZR Press Low-Low SI LSM A Feedback PC-455E PB LSM A 48 VDC IA Diverse-A
__A 7 9 302 dPC455E LSMA PZ rs ih- PORV A Feedback PC-937B PB LSM A 48 VDC IA Diverse-A A 7 11 302 dPC937B LSMA Ctmt Press Hi h-Hi h Clint Spray Ph B sIsn) LSM A Feedback FC-414 BypA_ [ 48 VDC IA Diverse-A A __ 7 12 302 dFC414 BYPA Loop 1 Low Flow Rx Trip BypA Switch Status FC-424_BypA 48 VDC -IA Diverse-A A 7 13 302 dFC424 BYPA Loop 2 Low Flow Rx Trip Byp A Switch Status FC-434_Byp A 48 VDC IA Diverse-A A 7 14 302 dFC434 BYPA Loop 3 Low Flow Rx Trip Byp A Switch Status FC-444 BypA 48 VDC IA Diverse-A A 7 15 302 dFC444_BYPA Lop ow Flow Rx Trip yp A Switch Status PC-4550_Byp A 48 VDC IA Diverse-A A 7 16 302 dPC455C BYPA PZR Press Low Rx Trip Byp A Switch Status PC-455ABypA
_ _48 VDC IA Diverse-A A 7 18 302 dPC455A BYPA PZRok I PresHihRl Ti Byp A Switch Status __________pC-455BBypA
_ 48 VDC IA Diverse-A A 7 17 302 dPC455A BYPA Unlc SI, PresHi1RxTi Byp A Switch Status PC-455D BypA -F 48 VDC IA Diverse-A A 7 19 302 dPC455D BYPA PZR Press Low-Low SI Byp A Switch Status PC-455E -48 VDC IA __ Diverse-A
___A 7 L20 302 dPC455E BYPA PZR Press High -PORV BypA Switch Status________
PC-937BBypA 48 VDC 4 IA Diverse-A A 7 22 302 dPC937B BYPA Ctmt Press High-High (Ctint Spray, Ph B sIsn) Byp A Sw Status PS3FAIL IA L 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IA ALS-A Chassis Power Supply 1 Failure (+48VA)PS6FAIL IA 48 VDC IA Diverse-A
__A 7 25 302 dPS6FAIL IA ALS-A Chassis Power Supply 2 Failure +48VB) _______PSIFAILIA 48 VDC IA Diverse-A A 7 28 302 dPS1 FAIL IA Analog Input Loop Power Supply 1 Failure PS4FAIL IA ' 48 VDC IA Diverse-A A 7 27 302 dPS4FAIL IA Analog Input Loop Power Supply 2 Failure PS2FAIL"IA 
+ 48 VDC IA __ Diverse-A A 7 _=28 302 dPS2FAIL IA ALS Contact Wettin upl 1 Failure ________PS5FAIL IA l 48 VDC IA Diverse-A A 7 29 302- dPS5FAIL IA ALS Contact Wetting Supply 2 Failure PPS I Alarrs Clear A j 48 VDC __ IA ._ Diverse-A A 10 1 102 dALMCLR IA PPS I A Alarm Clear Switch Status PPS I TABStatus A L 48 VDC IA Diverse-A A 10 2 102 dTABSTAT IA PPS I A TAB Enable Status-PC-414 PB LSM B ____48VDC K ~IA Diverse-B
__B 7 1 302 dFC414 LSMB Loop1 LowFlowRxTip LSM 8BFeedback FC--424 PB LSM B -48 VDC -IA Diverse-B B 7 2 302 dFC424 LSMB Loop 2 Low Flow Rx Trip LSM B Feedback FC-434- FB- [SM' B -48 VDC IA Diverse-B B 7 3 302 dFC434 LSMB Loop 3 Low Flow Rx Tdip LSM-B Feedback P0-444-PB-LSM-B]
48 VDC IA Diverse-B
__B 7 4 302 dFC444_LSMB Loo 4 Low Flow RxTrip LSM B Feedback PC-455C PB LSM B -48 VDC IA Diverse-B B -7 5 302 dPC455C LSMB PZR Press Low Rx Trip LSM B Feedback PC-4,55B PB LSM B 48 VDC IA F Diverse-B
__B 7 6 302 dPC455B LSMB Unblock SI, P11 LSM B Feed-back PC-455A PB LSM B 48 VDC i IA Diverse-B B 7 7 302 dPC455A LSMB PZR Press High Rx Trip LSMB Feedback PC-455D PB LSM BS 48 VDC IA L Diverse-B B 7 8 302 dPC455D LSMB PZR Press Low-Low SI LSM B Feedback PC-455E PB LSM B 48 VDC IA L Diverse-B B 7 9 302 dPC455E LSMB PZR Press High -PORV B Feedback PC-937B PB LSM B j 48 VDC IA i Diverse-B B 7 11 302 dPC937B LSMB Clinmt Press High-High (Ctmnt Spray, Ph B sIsn) LSM B Feedback FC-414_BypB 48 VDC IA Diverse-B B 7 12 302 dFC414 BYPB Loop 1 Low Flow Rx Trip BypB Switch Status FC-424 Byp B 48 VDC IA Diverse-B B 7 13 302 dFC424 BYPB Loo~o 2 Low Flow Rx Trip Byp B Switch Status FC-434_BypB 
[ 48 VDC ] IA Diverse-B B 7 -14 302 dFC434 BYPB Loop 3 Low Flow Rx Trip BypB Switch Status FC-444_Byp B _J 48 VDC __ IA Diverse-B B 7 15 302 dFC444 BYPB Loop 4 Low Flow Rx Trip Byp B Switch Status P0-4550 ByBB 48 VDC IA j Diverse-B B 7 16 302 dPC455C BYPB PZR Press Low Rx TripBy SwitchStatus________
PC-4558_BypB 48 VDC IA Diverse-B B 7 17 302 dPC455BBYPB Unblock SI, P11 BypB Switch Status PC-455D By/p B i 48 VDC IA -Diverse-B B 7 19 302 dPC455ADBYPB PZR Press Low-Lo SI~d Byp. B Switch Status PC-455ABypB 48 VDC IA { Diverse-B B __ 7 18 302 dPC455A BYPB PZR Press Low-Lo S~Ip Byp B Switch Status PC-455EBypB 
-1 48 VDC IA Diverse-B B 7 20 302 dPC455E BYPB PZR Press High -PORV BypB Switch Status P0-9378_Byp B -48 VDC j IA Diverse-B B 7 22 302 dPC937B BYPB Ctmnt Press High-High (Clint Spray, Ph B lIsn) Byp BSw Status PS3FAIL lB ~1 48 VDC IA ] Diverse-B B 7 24 302 dPS3FAIL lB ALS-B Chaasi Power Supply 1 Failure (+48VA)PS6FAIL lB 48 VDC IA Diverse-B B 7 25 302 dPS6FAJL lB ALS-B Chassis Power Supply 2 Failure (+48VB)_ PS1FAIL lB 48 VD0 IA ] Diverse-B_
__B 7 F28 302 dPSl1FAIL lB Analog Input Loop Power SupplyI Failure PS2FAILlB 48 VDC IA DvreB B 7 7 302 dPS4FAIL lB Analog Input Loop Power Supply 2 Failure PS2FAL__B48_V____I Diverse-B B 7 i28 302 dPS2FAIL lB ALS Contact Wetting Supply 1 Failure PPS Interface Requirements Specification, Rev 9 Appendix 4.1__________Sheet 4 of 9 PROTECTION SET I DISCRETE INPUTS _______INSTRUMENT iSIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG ]_______ _____TYPE PS5FAIL lB 48 VDC IA Diverse-B B 7 29 302 dPS5FAIL lB ALS Contact Wetting upl 2 Failure_________
PPS I AlarmClear B 48 VDC IA Diverse-B B 10 1 102 dALMCLRlB PPS I B AlarmClear Switch Status PPS I TAB Status B 48 VDC IA Diverse-B B 10 2 102 dTABSTAT lB PPS l B TAB Enable Status LPIDTTAOOS 
! 24 VDC IA Tricon 2 2 1 3503EN2 dL1 DTTA OOS DTTA Loop 1 Oh. OGS Switch LP1 TTD OOS 24 VDC IA Tncon 2 2 _35_03EN-2 dL1 TTD OOS TTD Lo 1 Oh. OOS Switch T3A OS24 VDC IA Tricon 2 -2 i3 3503EN2 dT413A OOS Loop 1 WR Thot Ch. OOS Switch T413B OOS 24 VDC IA r Tricon 2 2 4 3503EN2 dT413BOOS Loo I1 WR Tcold Oh. OOS Switch T423AOOS 24 VDC IA T ridcon 2 2 -5 3503EN2 dT423A OOS Loop 2 WR Thot Oh. OOS Switch T423B OOS 24 VOC -L IA Tricon 2 -2 8 3503EN2 dT423BOOS Loop 2 WR TcoldOh. OOS Switch L459 OOS 24 VDC ! IA Tricon 2 2 7 3503EN2 dL459 OOS PZR Level Oh. OOS Switch F51 2_OOS 24 VDC IA Tricon 2 -2 8 3503EN2 dF512 OOS Loop 1 Steamfiow Oh. OOS Switch F522 OOS 24 VDC IA Tricon __ 2 -2 9 3503EN2 dF522 DOS Lo o 2 Steamfiow Oh. OOS Switch F532 00S 24 VDC IA Tricon 2 -2 10 3503EN2 dF532 OOS Loop 3 Steamfiow Oh. OOS Switch F542 OOS 24 VDC IA Tdicon 2 2 11 3503EN2 dF542 OOS Loop 4 Steamfiow Oh. OOS Switch P514 OOS ! 24 VDC IA Tdicon -2 2 12 3503EN2 dP514 DOS Loop 1 Steamline Pressure Oh. OOS Switch P524_OOS 24 VDC IA Tricon 2 2 -13 3503EN2 dP524 DOS Loop 2 Steamline Pressure Oh. OOS Switch P534 OOS 24 VDC IA Tricon 2 _ 2 14 3503EN2 dP534 OOS LoogP 3 Steamline Pressure Oh. OOS Switch P544_OOS i 24 VDC IA Trdcon 2 2 15 3503EN2 dP544 OOS Loop 4 Steamline Pressure Oh. OOS Switch L529 OOS 24 VDC j IA Tricon 2 2 16 3503EN2 dL529 OOS S1G 2 Level Oh. OOS Switch L539 OOS 24 VDC .IA Tricon 2 2 17 3503EN2 _dL539_OOS S/G 3 LevelOh. OOS Switch P505 OOS 24 VDO IA Tricon 2 2 18 3503EN2 dP505_OOS Turbine Impulse Pressure Oh. OOS Switch PS2S FAIL 15 24 VDC IA Tricon 2 2 19 3503EN2 dPS2S FAIL 15 Analog Loop (Input) Power Supy PS2S Failure Relay PS7SFAIL 15 24 VDC F IA Tricon 2 -2 20 3503EN2 dPS7S FAIL 15 AnalgLop(Input)
Power Suppo PS7S Failure Relay PS3S FAIL 15 24 VDC IA Tricon 2 2 21 3503EN2 dPS3S FAIL 15 Discrete Loop Input) Power Suppl PS3S Failure Rala PS6S FAIL 15 24 VDC IA Tricon 2 2 22 3503EN2 dPS6S FAIL 15 DiscreeLo Iput) Power Suppl PS6S Failure Relay PS45 FAIL 15 24 VDC IA Tricon 2 2 23 3503EN2 dPS4S FAIL 15 Analog Loop Output) Power Supy PS4S Failure Relay PS55 FAIL 15 24 VDC IA Tricon ___2 2 24 3503EN2 dPS5S FAIL 15 Analo~ Loop Output) Power Supy PS5S Failure Relay 2401 PVVR 15 24VDC IA Tricon 2 2 25 3503EN2 d24DI PWR 15 Loss of Power to Ipu Card_________
TS/4110 120 VAC r IA Tricon 2 5 1 3501TN2 dTS411C TRIP TC-411C0Trip Status (DTTA Loop 1)TSI411G 120 VAO IA Tricon 2 5 2 3501TN2 dTS41lG TRIP TC-4l1G Trip Status DTTDAILoop 1)TS/412D 120 VAC IA Tricon 2 5 3 3501TN2 dTS412D TRIP TC-412D Trip Status (DTTA Loop 1 TS/412G 120 VAC IA Tricon 2 5 4 3501TN2 dTS412G TRIP TO-412G Trip Status DTTDA 1.......TC423A 120 VAC { IA L Tricon 2 5 5 3501 TN2 dTC423A TRIP TC-423A Tri Status (WR Tern TE-423B)LSI459A 120 VAC I IA Tricon 2 5 6 3501TN2 dLS459ATRIP LC-459A Tri Status (PZR LevelLT-459)
PS/514A 120 VAC IA Tricon 2 5 7 3501TN2 dPS514ATRIP PC-514A Trip Status (S/G 1 Stmline Press PT-514)______
PS/514C 120 VAC IA Tricon 2 5 8 3501TN2 dPS514C TRIP P0-5140 Tri Status (S/G 1 Stmline Press PT-514)PS/524A 120 VAC IA Tricon 2 -5 9 3501TN2 dPS524A TRIP PO-524A Tri Status (S/G 2 Stmline Press PT-524)PS/524C 120 VAC IA Tricon 2 5 10 3501TN2 dPS524CTRIP P0-5240 Tri~p Status (SIG 2 Stmline Press PT-524)PS/534A 120 VAC IA Tricon 2 5 11 3501TN2 dPS534ATRIP PC-534A Tri Status (SIG 3 Stmline Press PT-534)PS/534C 120 VAC IA L Tricon 2 5 12 3501TN2 dPS534C TRIP P0-534C Trip Status (S/G 3 Stmline Press PT-534)PSI544A 120 VAC IA [ Tricon 2 5 13 3501TN2 dPS544A TRIP [PC-5ATrp Status (SIG,4Stmline Press PT-544) -PS/544C 120 VAC -IA Tricon 2 5 14 3501TN2 dPS544C TRIP .,P0-5440 Tri Status (S/G 4 Stmline Press PT-544)LS/529A 120 VAC IA Tricon 2 5 15 3501TN2 dLS529A TRIP LC-529ATrip Status (5/0 2 Level LT-529)LS/529B 120 VAC IA Tricon 2 5 116 3501TN2 dLS529B TRIP LC-529B Tdp Status (S/G 2 Level LT-529)LS/539A 120 VAC IA Tricon 2 5 17 3501TN2 dLS539A TRIP LC-539ATri Status (S/G3 Level LT-539)LS/539B 120 VAC IA Tricon 2 5 18 3501TN2 dLS539B TRIP LC-539B Trip Status (S/G 3 Level LT-539)PS/505A 120 VAC IA Tricon 2 5 9 3501TN2 dPS505ATRIP PC-505A Trp Status (Turb Impulse Press PT-50OS PC-505A By 120 VAC IATricon 2 5 213501TN2 dPC505ABYP Turbine Impulse PressureHighto P13Byass Switch TSI411D 120 VAC i II Tricon 3 5__ 1 3501 E dTS4l11D TRIP TC-411ID Trip Status (DTTA Loop 1)
PPS Interface Requirements Specification, Rev 9 Appendix 4.1_________________________
_________Sheet 5 of 9 PROTECTION SET I DISCRETE INPUTS ______ _______INSTRUMENT 
/SIGNAL TYPE iINST. CLASS_ PROCESSOR CHASSIS SL=OT F CH CARD TAGNAME CHANNEL FUNCTION ___________
TAG _- TYPE TS/411H I 120 VAC __ II Tricon F 3501E dPS411H TRIP TC-511C Trtp Status (DTTA Lompus PrssP_)S PS/505C 120 VAC II Tricon ____ 5_ 3 3501E dPS505H TRIP PC-505C Tdp Status DTTArb oopulePe)
T55 PS3N FAIL 15S 120 VAC ...II Tricon 3 5 4_ 3501E dPS3N FAIL 15 ClassIIAalg op oer Suppl PS3N Failure Relay PS5NFAIL_15 
! 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 15 Class II Analog Loop Power Supply PSSN Failure Relay PS2NFAIL_15 120 VAC II Tricon 3 5 6 3501 E dPS2N FAIL 15 Isolator Power Supply PS2N Failure Relay PS6N FAIL 15 120 VAC II Tricon 3 5 7_ 3501E dPS6N FAIL 1S Isolator PowerSupp/y PS6N Failure Relay _______...___ ......__.___ 120VAC II Tricon 3 5__ F 3501__ ___,___,_________________
11/12/2013
_______j-____
__________
___ ______ _______________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 T F TU UtI UU 1VU SIGNAL TYPE INST. CLASS i PROCESSOR CHASSIS SLOT CH CARD ITAGNAME (9) /CHANNEL FUNCTION TAG FM-414B 4-20 mA IA i Diverse-A A 1 -i 1 421 yFl414 A Reactor Coolant Flow Loop i to FI-414 (VB2) via FM-414B_1 (isolator)
FM-424B 4-20 mA __ IA 1 Diverse-A A 1 -2 421 _ yFl424 A_ Reactor Coolant Flow Loop 2t0 Fl-424 82) via FM-424B 1 (isolator)
TE-413A 4-20 mA ,BA,1 Diverse-A A 8 4211 yTE413AA ILoop 1 Hot Leg Temp (to PS1 Tncon)TE-413B 4-20 mA BA,1 Diverse-A A 8 23 421 yTE4138 A Loopl Cold Leg Temp (to PS1 Thcon) ________TE-410B 4-20 mA IA Diverse-A A 8 3 21 TE4108_A Loo 1lTcold-1 (to PSi Tricni TE-410A 4-20 mA IA Diverse-A A 8 4 421 yTE410A A DTTA Loop 1 Thot-lA (to PSl Tricon)TE-411A 4-20 mA IA ___ Diverse-A__
A 8 5 421 yTE4I1A A DTTA Loop _T~hot-2A to( PSI Tucon)TE-412A 4-20 mA IA Diverse-A A 8 6 -4,21-l yTE412A A DTTA Loop 1 Thot-3A (to PS1 Tricon)__FM-434B__
4-20 mA IA __ Diverse-B
__B 1 421 yFI434B RReactor Co0olant Flow Loop 3 to FI-434 (VB2) via FM-434B 1 (isolator)
FM-444B 4-20 mA IA ] Diverse-B
___B ___ 1 2 l 421 yFI44-4_B Reactor Coolant Flow Loop 4 to FI-444 C(VB2) via FM-444B 1 (isolator)
TE-423A _ 4-20 mA -IB,A,1 _Diverse-B B 8 1 -421 yTE423AB L~op 2Hot Leg Temp (to PSI Tuicon)TE-423B 4-20 mA IA Diverse-B
___B ___ 8 2 !421 yTE423B B Loop 2 Cold Leg Temp (to PSi Tdcon)TE-411B 4-20 mA IA Diverse-B
___B 8 3 i421 yTE411B 'B DTTA Loop 1 Tcold-2 (to PSi Tncon)TE-iO 4-0 A I __Diere-B
_-5 4 4,21 yTE411C B DTTA Loop 1 Thot-2B (to PS1 Tricon)TE-411C 4-20 mA IA Diverse-B
__B 8 6 421 TE1CB DALo 1Tht2toPiTcn TE-412C 4-20 mA IA Diverse-B B 8 6 41 yTE412C 'B DTTA Loop 1 Thot-3B (to P51 Tdicon)TM-413A 4-20 mA IBA,I i Tricon 1 _ 5 -1 3805HN yTR413 RED Loop 1 Hot Le Temp to TR-413 8V2, ERFDS 8V1) & RVLIS (PAM4)TM-423B 4-20 mA BA,1 Tricon 1 5 2 3805HN yTR4238BLU 
!Loop_2 Cold Leg Tem to TR-423 (VB82), ERFDS (VB1)FM-522D 4-20 mA IA (10) Tricon 1 ___ 5 3 3805HN yFI522 ILoop 2 Stmflow to FI-522 (VB3) & ERFDS (VB1) via FM-522_2 (Isolator)
FM-542D 4-20 mA IA (10) Tricon 1 5 4 3805HN yFI542 !Loop 4 Stmflow to FI-542 8V3) & ERFDS 8V4) via FM-542 2 (Isolator)
TM-413B 4-20 mA IB,A,1 -Tricon ___1 _ 6 1 3805HN yTR413 BLU Loop 1 Cold Leg Temp to TR-413 (VB82), ERFDS (VB11)TM-423A 4-20 mA IB,A,1 , Tricon 1 _ 6 2 3805HN yTR423 RED Loop 2 Hot Leg Temp to TR-423 (VB2), ERFDS (VB1) & RVLIS (PAM4)FM-512D 4-20 mA _.IA (10) i- Tricon 1 6 3 3805HN LoopI_ Stmflow to FI-51.2 (VB3) & E RFDS (.8)vi M5 2(l_&sect;olator)_ 
-FM-532D 4-20 mA IA (10) i Tricon 1 6 4 3805HN yFl532 Loop 3 Stmflow to Ft-532 (VB3) & ERFDS (VB4) via FM-532_2 (Isolator)
TM-411E 4-20 mA II -- Tricon __3 _ 2 1 3805E yTI411A Delta-T to TI-411A (VB2) & aTM411E (RN04A)TM-411F 4-20 mA II Tricon __3 _ 2 2 3805E yTI411B Overpower Setpoint to T/411A (CCl) &TI-411B (VB82)TM-41 1G 4-20 mA II Tricon _ 3 2 __3 3805E yTl4l11C O vertemp epin oT/41_ 1ACC1)&
TM-412F 4-20 mA I6 Tdlcon 3 2 4 3805E yTl412 Tavgl to TI-412 (VB82) & aTM412F (RN04A)PM-505A 4-20 mA II Tdcon 3 2 5 3805E yPt505 Turbine Impulse Pressure to P1-505 (V183)bM4Q 4-9fi B 3 6 ZR.LZ':Z!tERFDSM'JX01,A'!1) 
-LT-459 Input 4-20 mA IB,A,1I (7) N/A N/A N/A' N/A N/A _ PZR Level to -5A(2) LI-459A859_(HSP) 
-_ _LM-459 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 01 (V181)PM-455 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Pressure to PZR Pressure Control, PI-455A (VB82), PI-455B (HSP)FM-512_1 4-20 mA II Isolator Out N/A __ N/A N/A N/A _ N/A _L~o 1 Steamfiow to DFWCS FM-512 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop I Steamfiow to FI-512 (VB3) &ERFDS (VB81)FM-522 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamtlow to DFWCS FM-522 2 4-20 mA IB,D,2 Isolator Out N/A _N/A N/A N/A N/A Loop.#2Steamnflow to FI-5221yB3) 
& ERFDS (VB1)___________
FM-532 1 4-20 mA II Isolator Out N/A N/A N/A N/A --N/A Loop 3 Steamtlow to DFWCS FM-532 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to FI-532 (VB3) & ERFDS (V184)__FM-542_1
__4-20 mA II Isolator Out N/A N/A N/A iN/A N/A Loopp4 Steamitow to DFWCS FM-542 2 4-20 mA IBD,2 Isolator Out N/A N/A N/A N/A N/A Loop 4 Steamllow to FI-542 (VB83) & ERFDS (VB4)PT-514 Input 4-20 mA __IB,A,1 .... (7) N/A _N/A N/A N/A N/A L P 1 Steamline Press to PI-514A ('183), PI-5148_(HSP), ERFDS ('184)PM-514 1 4-20 mA II Isolator Out N/A N/A N/A /N/A N/A Loop t Steamline Pressure to DFWCS PT-524 Input 4-20 mA lB,A,1 (7) N/A N/A N/A N/A N/A LP 2Steamline Press to PI-524A (VB3), PI-5248 (HSP), ERFDS (V184)__PM-524 1 4-20 mA __ II Isolator Out N/A N/A N/A N/A N/A Loop2 Steamline Pressure to DFWCS PT-534 Input 4-20 mA lB,A,1 j7) N/A N/A N/A N/A -N/A LP 3 Steamline Press to PI-534A (VB3, P1-5348 (HSP), ERFDS 8V1)PM-534_1 4-20 mA II Isolator Out N/A N/A N/A /N/A N/A Loop 3 Steamline Pressure to DFWCS P54Int 4-0mBA7)N/A N/A N/A N/A N/A L P 4 Steamline Press to PI-544A 8V3), P1-5448 (.HSP), ERFDS (VB84)PM-544 1 4-20 mA II Isolator Out N/A N/A jN/A N/A N/A Loop 4 Steamline Pressure to DFWCS PPS Interface Requirements Specification, Rev 9 Appendix 4.1________________________________
__________
____________
______________________________________________________Sheet__
Sheto7of9 PROTECTION SET I ANALOG OUTPUTS_______
_______INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION TAG TP PM-505 1 4-20 mA ____II ____ solator Out N/A N/A N/A N/A N/A Turbine Imputse Pressure to AMSAC LM-529_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A SIG 2 Level to LI-529 (VB3), DFWCS, AFW_____LM-539 1 4-20 mA ____II __ Isolator Out N/A N/A N/A N/A N/A ISf0 3 Level to LI-539 (V3, OFWCS, AFW LM-539 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A iSf0 3 Level to AMSAC PT-937 Input 4-20 mA IBA,1 7) ~ N/A N/A N/A N/A N/A Containment Pressure to P1-937 VBi)FM-4148 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop ito FI-414 (B2)FM-424B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A ReactorCoolantFlow Loop 2 to FI--42, (VB2) -_________
FM-434B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 to FI-434 (B2)FM-444B_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 to FI-444 8V2)111/0311/12___
______________________2013_____________________________________________
PPS Interface Requirements Specification.
Rev 9 Appendix 4.1___________________________________
___ -___________
_____________________________Sheet_
Sheto8ff9 PROTECTION SET I DISCRETE OUTPUTS___
__ ___ _______________________________
INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE ITYPE UY-PS1A DIV-A II 125 VDC Diverse-A A 2 1/2 402 cPS1A DIV A PPS I Chassis A Trouble UY-PS1CDIV-A II 125 VDC Diverse-A i A 2 3/4 402 cPSlCDIV A PPS I Chassis A Failure UY-PS1B DIV-A II 125 VDC Diverse-A 
! A 2 5/6 402 cPS1B DIVA PPS I Chassis A Channel in Bypass UY-PS1DDIV-A II 125 VDC Diverse-A A 2 7/8 402 cPS1D DIV A PPSIlChassis AOut of Servtce FC-414 A IA 120 VAC Diverse-A A 9 1 402 cFC414_A Loop 1 Low Flow Rx Trip (SSPS)FC-424 A IA 120 VAC Diverse-A A -9 2 402 cFC424 A Loop 2 Low Flow Rx Trip (SSPS)FC-434_A __IA 120 VAC ___ Diverse-A A 9 3 402 cFC434 A Loop 3Low Flow Rx Trip(SSPS)
_______FC-444 A IA 120 VAC Diverse-A 9 4 402 cFC444 A Loop 4 Low Flow Rx Trip (SSPS)PC-455C A l IA 120 VAC Diverse-A A l9 5 402 cPC455C A PZR Pressure Low Rx Trip (SSPS)PC-455B A .___IA 120 VAC Diverse-A A [ 9 6 402 cPC455B A Unblock SI, P11 (SSPS _____PC-455A A IA 120 VAC Diverse-A A !9 7 402 cPC455A A PZR Pressure High Rx Trip (SSPS)PC-455D A IA 120 VAC Diverse-A 9 8 402 cPC455D A PZR Pressure Low-Low SI (SSPS)__PC-455E A IA 120 VAC (11) Diverse-A A 9- 9 402 cPC455E A PZR Pressure High -PORV (RNASA)PC-937B A IA 48 VDC Diverse-A A 9 11 402 cPC937B A Clint Press High-High Ctmt Spray. Ph B sIsn (SSPS)LOOP PULSE A II 48 VDC Diverse-A A 10 1 102 cPULSE A PPS IASstem Timebase Frame Rate Outpu~t UY-PS1A DIV-B II 125 VDC Diverse-B B 2 1/2 402 cPS1A DIV B PPS I Chassis B Trouble UY-PS1C DIV-B __II 125 VDC Diverse-B
_B 2 3/4 402 cPS1C DIV B PPS I Chassis B Failure UY-PS1B DIV-B II 125 VDC Diverse-B 8 2 5/6 402 cPS1B DIV B PPS I Chassis B Channel in Bypass UY-PS1D DIV-A II 125 VDC Diverse-B B 2 7/8 402 cPS1DDIV B PPS I Chassis B Out of Service FC-4t4 B IA 120 VAC Diverse-B B 9 1 402 cFC414 B Loop 1 Low Flow Rx Trip (SSPS)FC-424 B IA 120 VAC Diverse-B B 9 2 402 cFC424 B Loop 2 Low Flow Rx Trip (SSPS)__FC-434 B IA 120 VAC -__ Diverse-B B 9 3 402 cFC434 B Lop3 Low Flow Rx Trip SSPS)FC-444.B IA 120 VAC Diverse-B 
.....B ... 9 4 402 cFC~444B Loop 4 Low--FlIow Rx Trip (SSPS)PC-455C B IA 120 VAC Diverse-B 8 9 5 402 cPC455C B PZR Pressure Low Rx Trip (SSPS)PC-455BB _ IA 120 VAC Diverse-B 
... B. 6 402 _cPC455B B Unblock SI, P11 (SSPS)PC-455A B IA 120 VAC Diverse-B 1 B l 7 402 cPC465A B PZR Pressure High Rx Trip (SSPS)PC-455D B IA 120 VAC Diverse-B B _9 8 402 cPC455D B PZR Pressure Low-Low SI (SSPS)__PC-455E B IA 120 VAC (11) Diverse-B B 9 9 402 cPC455E B PZR Pressure High -PORV (RNASA)PC-937B B IA 48 VDC Diverse-B f B 9 11 402 cPC937B B Clint Press High-High Ctmt Spray. Ph B Isin (SSPS)LOOP PULSE B _ II 48 VDC Diverse-B B 10 1 _ 102 cPULSEB PPSLI B System Timebase Frame Rate Output TC-411G IA 120 VAC Tricon i 2 l6 1 3601TN cTC411G OPDT Rx Trip (SSPS)TC-412D __ IA 120 VAC Tricon t 2 1 6 2 3601TN cTC412D Tvyg_ Low-Low P12 (SSP TC-423A IA 120 VAC Tricon ; j6 3 3601TN cTC423A Loop 2 Cold Leg Temp. Low -LTOPS (RNASA)LC-529A IA 120 VAC Tricon 2 6 4 3601TN cLC529A S/G 2 Hi h-High Level Turbine Trip, FWlIsln P14 (SSPS)LC-539B IA 120 VAC Tricon 2 l 6 5 3601 TN cLC539B S/G 3 Low-Low Level Rx Trip & AFW Pump Start (SSPS)PC-505A IA 120 VAC Tricon 2 i 6 6 3801 TN cPC505A Turbine Impulse Pressure High to P13 (SSPS)PC-514C IA 120 VAC Tricon 2 6 7 3601TN cPC514C Lop Stmnline Press High Negative Rate Stln Isin (SSPS)PC-524A IA 120 VAC Tricon 2 6 8 3601TN cPC524A Loop 2 Low Stmline Press SI & Stmline Ilan (SSPS)PC-534C IA 120 VAC Tricon 2 6 9 3801TN cPC534C Loop 3 Stmline Press High Negative Rate Stmline Ilan (SSPS)PC-544A IA __ 120 VAC Tricon _2 6 10 3601TN __cPC544A__
Loop 4 Low Stmline Press SI & Stmaline lIin (SSPS)TC-4110 IA 120 VAC Tricon .2. 7 13601TN cTC4110 OTDT Rx Trip (SSPS)TC-412G IA 120 VAC Tricon _ 2 2. 7 2 3601TN cTC412G __Tavg LowFeedwater Isolation -___LC-459A IA 120 VAC Tricon 2 7 3 3601TN cLC459A PZR Level High Rx Trip (SSPS)LC-529B IA 120 VAC Tricon 2 L 7 4 3601 TN __ cLC529B S__ /G 2 Low-Low Leve Rx Trip & AFW Pump Start (SSPS)___LC-539A IA 120 VAC Tricon 2 --[7 5 3601TN cLC539A S/G03 High-High Level Turbine Trip, FW slan P14 (SSPS)PC-514A IA 120 VAC Tricon 2 2 -.... 6 3601TN cPC514A Loop 1 Low Stmntine Press SI & Stmnline sIsn (SSPS)PC-5240 IA_ 120 VAC Tricon 2 7 7 3601TN __cPC524C Loop 2 Stmline Press Hih Negative Rate Stmline Ilan (SSPS)PC54 I 2 VCT7cn2 -8 3601TN cPC534A Loop 3 Low Stmnline Press SI & Stmline Isin (SSPS)P0-544cP-50 IAA 1220 v~VAC Trrcon~rcn i 2 7 9 3601TN cPC544C Loop 4 Stmnlne Press High Negative Rate Stmaline slan (SSPS)LY-529H II 125 VDC Tricon ! 3 7 1 3636T cALM1465 PPS I S/G Low-Low Level TTD Timer Actuated Alarm PK0605 PPS Interface Requirements Specification.
Rev 9 Appendix 4.1 PROTECTION SET I DISCRETE OUTPUTS Set9o INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE TYPE UY-PS1A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1463 PPS I Trouble Alarm PK0604 UY-PS1B TRICON II 125 VDC Tricon 3 7 3 3636T cALM1464 PPS IChannel in Bypass Alarm PK(0602 UY-PS1C TRICON II 125 VDC Tricon 3 7 4 3636T cALM1462 PPS I Failure Aiarm PK(0601 TY-411 TRICON II 125 VDC Trdcon 3 7 5 3636T cALM1466 PPS I RTD Failure Alarm PK(0603 OOSITRICON II 125 VDC Tricon 3 7 6 3636T cALM0734 PPS I Channel OOS Alarm PK(0607 125 VDC Tricon 3 7 7 3636T Spare________125 VOC Tnlcon 3 7 8 3636T Spare PC-5050 II 120 VAC Tricon 3 7 14 3636T cPC505C Turbine Low Power Interlock CS (RNARA)TC--411D II 120 VAC Tricon 3 7 15 3636T cTC411D OTD3T Intedlock 03 (RNARA)TC-411H II 120 VAC Tricon 3 7 16 3636T cTC411H OPDT Interlock C4 (RNARA)11/12/2013
___
PFS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 1 of 9 LOTICHICARD tTAGNAME (5)TAG TYPE_TE-433A 200 OHM RTD lB,A,1 0 -700 &deg;F Diverse-A A -5 1 311 (w aTE433AA WR Tern Loop 3 Hot Leg (for RTD conversion to mA)TE--433B 200 OHM RTD IA 0 -700 0 F Diverse-A A 5 2 i311 (w)aTE433BA9 TepLo odLg(or RTD conversion to mA)TE-420B 200 OHM RTD IA 350- 650 =F Diverse-A A 5 3 l311 (w aTE420B A DTTA Loop 2 Tcold-1 (for RTD conversion to mA)TE-420A_ 200 OHM RTD IA _ 350 -650 0 F Diverse-A A 5 4 -31 (w)aTE420A A DTTA Loop 2 Thot-lA (for RTD conversion to mA) _TE-421A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 5 (w)aTE421A A DTTA Loop 2 Thot-2A (for RTD conversion to mA)TE-422.A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 6 311 (w~aTE422A A DTTA Loop 2 Thot-3A (for RTD conversion to mA)FT-415 14-20 mA (3)- IA 0 -100 XMTR d % Diverse-A A 6 1 321 IT.5DPA !Reactor Coolant Flow Loop 1 FT-425 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6- 2 321- (w)aFT425DP ARectr oolant Flow Loop 2 FT-435 J4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 i321 (w)aFT435DPA Reactor Coolant Flow Loop 3 FT-445 4-20 mA (3) IA 0 -100 XMTR dp% _Diverse-A A 6 4 32"1 (w)aFT445DP A Reactor CoolantFlow Loop PT-456 4-20 mA (3) IA 1250 -2500 psig Diverse-A A 6 5 /321 (w)aPT456 A PZR Pressure__PT-936 4-20 mA (3) IA 55 psig Diverse-A A 6 6 3_21_ (w)aPT936 AjContainment Pressure TE--443A 200 OHM RTD IBA1 0 -700 &deg;F Diverse-B B 5 1 311 (w)aTE443A B VWR Temp Loop 4 Hot Leg (for RTD conversion to mA)TE-443B -200 OHM RTD IBA,1 _ 0- 700 &deg;F Diverse-B B 5 2 311 B WR Temp Loo 44Cold Leg (for RTD~conversion tomA)TE.-421 B 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 3 311 (w)aTE421 BB DTTA Loop 2 Tcold-2 (for RTD conversion to mA)TE-420C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 4 31 1 (w)aTE42OCB DTTA Loop 2 Thot-1 B (for RTD conversion to mA)TE-421C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 5 3t11 (w)aTE421C B DTTA Loop 2 Thot-_2B (for RTD conversion to mA_)TE-422C -I200 OHM RTD IA 350 -650 --&deg;F .... Diverse-B B 5 6 311 (w~aTE422C B DTTA Loop 2 Thot-3B (for RTD conversion to mA)FT-41 5 4-20 m A(3) IA 0 -100 XMTR dp% Diverse-B B 6 1 321 (w)aFT41 5DPB Reactor Coolant Flow Loop 1 FT-425 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 6 2 321 (w)aFT425DP B Reactor Coolant Flow Loop 2 FT-435 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B B 3 321 (w)aFT435DPB Reactor Coolant Flow Loop 3__FT-445 4-20 mA (3) IA__ 0 -100 XMTR dp% Diverse-B B 6 4 _321 (waFT445DPB Reactor Coolant Flow Loop 4 PT-456 4-20 mA (3) IA 1250- 2500 psij Diverse-B B 6 5 321 (w)aPT456 B PZR Pressure PT-936 4-20 mA (3) IA 55 psig Diverse-B B B 6 321 (w)aPT936 B Containment Pressure NE-42A 0-10 VDC IA 0 -120 %____ Tricon 1 2 1 3703EN (w)aNE42A DTTA Loop 2 Upper (Neutron)
Flux NE-42B 0-10 VDC IA 0 -120 % Tricon 1 2 2 3703EN (w)aNE42B DTTA Loop 2 Lower (Neutron)
Flux___TE-433A 4-20 mA (3) IBA,1 0 -700 &deg;F Tricon 1 -3 1 3721N (w aTE433A WR Temperature Loop 3 Hot Leg TE-433B ...4-20 mA (3)_ IB,A,1 0 -700 0 F Tticon 1 -3 2 3721N (w)aTE433B WR Temperature Loop 3 Cold Leg -TE-420B 4-20 mA (3) IA 510- 630 *F Tricon 1 3 3 3721N (w aTE4208 DTTA Loop 2 Tcold-1 TE-420A 4-20 mA (3) IA 530 -650 =F Tricon 1 3 4 3721 N (w)aTE420A DTTA Loop 2 Thot-lA TE-421A 4-20OmA (3) IA 530 -650 &deg;F Tricon 1 3 5 3721N (w)aTE421A DTTA Loop 2 Thot-2A TE-422A 4-20 mA 3) IA 530 -650 "F Tricon 1 3 6 3721 N (w aTE422A DTTA Loop 2 Thot-3A PT-456 4-20 mA(3, IA 1250 -2500 psig Tricon 1 3 7 3721 N (w)aPT456 DTTALoop 2 PZR Pressure FT-513 4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 3 8 3721N (w aFT513DP Loop 1 Steamflow_________________
_ 0 -4.5 MPPH Tticon 1 3 6 N/A rFT513 Loop 1 Steamflow Compensated
__FT-533 4-20_mA (3) IA 0 -100 _ XMTRd d% Tricon 1 ._3 ..... 9 3721N (w)aFT533DP Loop 3Steamtlow
____________________
0 -4.6 MPPH Trdcon 1 3 9 N/A rFT533 Loop 3 Steamfiow Cornpensated PT-515 4-20 mA (3) IA 0- 1200 ~psiL Tdcon 1 3 10 3721N (w)aPT515 Loop 1 Steamline Pressure PT-535 4-20 mA IA 0 -_1200 sig_ Tricon 1 3 11 3721 N (w)5PT535 Loop 3 Seamline Pressure LT-519 4-20 mA (3 IA 0- 100 %____ Tricon 1 3 12 3721N (w)aLT519 S/G 1 Level____Tricon 1 3 13 _ Spare__PT-SOB 4-20 mA (3) IA 0 -110 % Tdicon 1 3 3721 N (w)aPT506 ITurbine Impulse Pressure___________
__________Trcon 1 3 14 j3721N Spare TE-443A 4-20 mA (3) IA 0 -700 &deg;F Tticon 1 4 1 13721 N (w)aTE443A TWR Temperature Loop 4 Hot Leg TE-443B L4-20 mA (3) IB,A,1 0 -700 OF Trdcon 1 4 2 3721 N (w)aTE443B WR Temperature Loop 4 Cold Leg TE-421B 4-20 mA 3) IA 510 -630 0 F Tricon 1 4 3 3721N (w)aTE421B D0TTA Loop 2Tcold-2 -TE-420C 4-20 mA (3) IA 530 -650 0 F Tricon 1 4 4 3721 N (w)aTE420C DT3TAr L-oop 2 Thot-1lB TE-421C 4-20OmA (3 IA 530 -650 &deg;F Tticon 1 4 5 3721N (w)aTE421C DTTA Loop 2Thot-2B__TE-422C 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 4 6 3721N DTTA Lo 2 Thot-3B ____LT-460 4-20 mA (3) IA 0 -100 %____ Tricon 1 4 7 3721-N (w aLT460 PZR Level PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 2 of 9 PROTECTION SET II ANALOG INPUTS _________INSTRUMENT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG TYPE FT-523 4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 4 8 3721N (w)aFT523DP Loop 2 Steamfiow 0 -4.5 MPPH Tricon 1 4 8 N/A rFT523__ Loop 2 Steamfiow Compensated FT-543 i4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 4 9 3721N (w)aFT543DP Loop 4 Steamflow-T550 -4.5 MPPH Trdcon 1 4 9 N/A rFT543 Loop 4 Steamflow Compensated P%525___ 4-20 mA (3) IA 0 -1200 psi Tdicon 1 4 10 3721N (w)aPT525 Loop 2 Steamline Pressure PT-545 ,4-20 mA (3) IA 0 -1200 psig Tdicon 1 4 11 3721 N (w)aPT545 Loop 4 Steamline Pressure LT-5~49 -20_mA (3) IA 0- 100 % Trdcon 1 4 12 3721 N (w)aLT549 S/G 4 Level__ ___LM-460 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level FM-51 3 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A __Loop 1 Steamflow 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow Compensated FM-523 1 20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loo 2 Steamfiow
______FM-523 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A -N/A I Loop 2 Steamfiow Compensated FM-533 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A ILoop 3 Steamfiow FM-533 2 4-20 mA IA NA NA Isolator N/A __N/A N/A N/A N/A Loop 3 Steamflow Compensated FM-543_1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A ILoop 4 Steamflow FM-543 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A ILoop 4 Steamflow Compensated PM-515_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1iSteamline Pressure PM-525_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Ioo0 2 Steamline Pressure PM-535 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A __Loop 3 Steamline Pressure PM-545 1 4-20 mA IA NA NA-- Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure LM-519 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-549_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A __S/G 4 Level LM-549 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level PM-506_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Turbine Impulse Pressure PM-456 1 4-20 mA __IA __ NA NA Isolator N/A N/A N/A N/A PZR Pressure FM-41 5B 1 4-20 mA IA NA NA Isolator N/A N/A N/A lN/A N/A Reactor Coolant Flow Loop 1 Normalized FM--425B 1 4-20 mA IA NA NA Isolator -N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-435B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized 
-FM-445B_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 11!12/2013
_____ ____ ______________________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4,2 Sheet 3 of 9 PROTECTION SET II DISCRETE INPUTS [INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT iCH CARD TAGNAME CHANNEL FUNCTION TAG _________TYPE
_______ _____________
_________FC-415FB LSM A 48 VOC IA -Diverse-A 
-A -~302 dFC41 5LSMA Loop 1 Low Flow Rx Trip LSM A Feedback FC-425 FB LMA 48 VDC IA Diverse-A A 7 2 302 dFC425 LSMA Loop 2 Low Flow Rx Trip LSM A Feedback FC-435 FB LSM A 48 VDC IA__ _Diverse-A A -7I 3 302 dFC435_LSMA Lo~op 3 Low Flow Rx Trip LSM A Feedback FC-445 FB LSM A 48 VDC IA Diverse-A A 7 4 302 dFC445 LSMA Loop 4 Low Flow Rx Trip LSM A Feedback PC-4560 FR LSM A 48 VDC IA Diverse-A A 7 5 302 dPC456C LSMA PZR Press Low Rx Trp LSM A Feedback PC-456B FB LSM A 48 VDC IA __ Diverse-A A 7 6 302 dPC456B LSMA Unblock SI, P11 LSMA Feedback PC-456A FB LSM A L 48 VDC IA Diverse-A A 7 7 302 dPC458A LSMA PZR Press High Rx Trip LSM A Feedback PC-456D FB LSM A 48 VDC IA -Diverse-A A 7 8 302 dPC456D LSMA PZR Press Low-Low SI LSM A Feedback PC-456E FR LSM A 48 VDC IA Diverse-A A 7 9 302 dPC456ELSMA PZR Press Hi h -PORV LSM A Feedback PC-936A FR LSM A 48 VDC IA Diverse-A A___ 7 10 302 dPC936A LSMA Ctmt Press High (SI, Ph A Isln) LSM A Feedback PC-936BFBLSMA 48 VOC IA Diverse-A A _7J 11 302 dPC936B LSMA Ctint Press High-High (Clint Spray, Ph B slan) LSM A Feedback FC-415_Byp A 48 VDC IA Diverse-A A 7 -12 302 dFC415. RYPA Loop 1 Low Flow Rx Trip Byp A Switch Status FC--425_RypA 48 VDC IA -Diverse-A A 7 13 302 dFC425 RYPA Loop 2 Low Flow Rx Trip Byp A Switch Status FC-435 ypA 48 VDC IA Diverse-A A 7 14 302 dFC435_RYPA Loop 3 Low Flow Rx Trip BypA Switch Status FC-445_BypA 48 VDC IA Diverse-A A 7 15 302 dFC445 RYPA Loop 4 Low Flow Rx Trip Byp A Switch Status P0-4580_BypA I 48 VDC IA Diverse-A A -7 16 302 dPC456C RYPA PZR Press Low Rx Trip Byp A Switch Status PC-456BBypA 48 VDC IA Diverse-A A 7 17 302 dPC456BRYPA Unblock Si, P11 B} A Switch Status__PC-456ABypA 48 VDC IA Diverse-A A 7 18 302 dPC456A RYPA PZR Press High Rx Trip Byp A Switch Status PC-456D Byp A 48 VDC IA __Diverse-A A 7 19 302 dPC456DBYPA PZR Press Low-Low SI yp. A Switch Status PC-455EBRpA 48 VDC IA Diverse-A A 7 20 302 dPC456E BYPA PZR Press High -PORV Byp A Switch Status PC-936AB A 48 VDC IA Diverse-A A 21 302 dPC936A BYPA Ctmnt Press High (SI, Ph A sIsn) Byp A Sw Status__PC-936B ByJoA ....48 VDC IA _ Diverse-A A 22 302 dPC936BBYPA
_Cltmt Press High-High (Ctint SpaP Bl)B~ypA Sw Status PS3FAIL IIA 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IIA ALS-A Chassis Power Supply 1 Failure (+48VAi PS6FAILIIA i 48 VDC IA Diverse-A A 25 302 dPS6FAILIIA ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAIL IIA 48VDC IA Diverse-A A 7 26 302 dPS1FAJL IIA Analog InputLoop Power Suppl 1 Failure PS4FAIL ItA 48 VDC IA Diverse-A A 7 27 302 dPS4FAIL IIA Analog Input Loop Power Supply 2 Failure PS2FAIL.JIA 48 VDC ___IA Diverse-A A 28 302 dPS2FAILIIA ALS Contact Wetting Supply 1 Failure PS5FAILIIA 48 VDC IA Diverse-A A 7 29 302 dPS5FAIL IIA ALS Contact Wetting Supply 2 Failure- ...........
PPS II AlarmClearA i48 VDC IA Diverse-A A 10 1 102 dALMCLR IIA PPS II AAlarinClear Switch Status PPS II TAR 48 VDC IA Diverse-A A 10 2 102 dTABSTAT-8A PPS II A TAB Enable Status __FC-41 5_FRLSMB 48 VDC IA -Diverse-B B -7 1 302 dFC415 LSMB Loop 1 Low Flow Rx Trip LSM B Feedback FC-425 FR LSM 8 48 VDC IA Diverse-B
__B 7 2 302 dFC425 LSMB -Loop 2 Low Flow Rx Trip LSM B Feedback FC-435_FBLSMB 48 VDC IA Diverse-B B 7 3 302 dFC435_LSMB Loop 3 Low Flow PRx Trip LSM B Feedback FC-445 FR LSM B 48 VDC IA Diverse-B
__B 7 4 _302 dFC445_LSMB Loop 4 Low Flow Rx Trip LSM B Feedback ___ ___P0-4560 FR LSM B 48 VDC IA Diverse-B B 7 5 302 dPC456C LSMB PZR Press Low Rx Trip LSM B Feedback PC-456B FR LSM .B 48 VDC IA Diverse-B B 7 8 302 dPC456B LSMB Unblock SI, P11 LSM B Feedback PC-4565A FB LSM 1& 48 VDC IA Diverse-B B _7 ;7 302 dPC456ALSMB PZR Press HihRxTi LSM B Feedback PC-456D FR LSM B1 48 VDC IA Diverse-B B 7 8 302 dPC456D LSMB PZR Press Low-Low SI LSM B Feedback PC-456E FR LSM B 48 VDC IA Diverse-B B -71 9 302 dPC456E LSMB PZR Press High -PORV LSM B Feedback PC-936A FR LSM B 48 VDC -IA Diverse-B B 7 10 302 dPC936A LSMB Ctmnt Press High (Si, Ph A slan) LSM B Feedback Pc-g36BFB LSM B 48 VDC IA Diverse-B
__B 7 11 302 dPC936B LSMB Clint Press High-High (Cltmt Spray, Ph B Isin) LSM B Feedback FC-4l5_BypB 
] 48 VDC IA Diverse-B B -7 12 302 dFC415.-BYPB Loop 1 Low Flow Rx Trip Byp B Switch Status FC-425_Byp.
B 48 VDC IA __ Diverse-B
__B 7 13 302 dFC425_BYPB Loop0 2 Low Flow RxTripByp B Switch Status ___FC-435_Byp B 48 VDC IA Diverse-B
__B 7 14 302 dFC435 BYPB Loop 3 Low Flow Rx Trip Byp B Switch Status FC-445_Byp B 48 VDC IA Diverse-B B -7 15 302 dFC445_BYPB Lo 4 Low Flow Rx Trip B B Switch Status P0-4560 By/p B -48 VDC IA Diverse-B
__B 7 16 302 dPC456C BYPB PZR Press Low Rx Trip Byp B Switch Status P0-456BBypB 
-48 VDC IA Diverse-B
__B -7 17 302 dPC456B BYPB Unblock SI, P11 Byp B Switch Status PC-456ABypB 
-48 VDC IA Diverse-B
__B -7 18 302 dPC456A BYPB P'ZR Press High Rx Trip _Byp B Switch Status PC-456DBypB 48 VDC IA Diverse-B B 7 i19 302 dPC456D BYPB PZR Press Low-Low SI Byp B Switch Status PC-456EBypB 
-48 VDC IA Diverse-B B 7 /20 302 dPC456E BYPB PZR Press High -PORV Byp B Switch Status PC-936AByp B -48 VDC IA __ Diverse-B B 7t 21 302 dPC936ABYPB CtmtPress igh (Si, Ph A Ilan) BypB Sw Status P0-936BBypB 48 VDC IA Diverse-B B 7 -22 302 dPC936B BYPB Clint Press High-High (Ctmnt Spray, Ph B Isin) Byp B Sw Status PS3FAIL lIB 1 48 VDC IA Diverse-B i B 7 24 -302 dPS3FAI"L._lB ALS-A Chassis Power Supply 1 Failure (+48VA)
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 4 of 9 PROTECTION SET nI DISCRETE INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE PS6FAIL 11B 48 VDC IA Diverse-B B 7 25 302 dPS6FAIL lB ALS-A Chassis Power Supply 2 Failure (+48VB)PSIFAJLIIB 48 VDC IA -Diverse-B B 7 26 302 dPS1 FAIL 1IB Analo InputLoop Power Suppl 1 Failure PS4FAIL lIB 48 VDC IA Diverse-B B 7 27 302 dPS4FAIL 1iB Analo Input Lao Power Supy 2 Failure PS2FAtL lIB 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL 1iB ALS Contact Wetting Supl 1 Failure PS5FAIL lIB 48 VDC IA -Diverse-B B 7 29 302 dPS5FAILIIB ALS Contact Wetting SuppI 2 Failure PPS II Alarm Clear B 4B VDC IA Diverse-B B 10 1 102 dALMCLRI1B PPS II_B A~larm Clear Switch Status PPS II TAB StatusBj 48 VDC IA Diverse-B B 10 2 102 dTABSTAT_118 PPS lIIB TAB Enable Status LP2_DTTAOOS 24 VDC IA Tricon 2 -2 1 3503EN2 dL2_DTTA OOS DTTA Loop 2 Ch. OOS Switch LP2_TTD OOS -24 VDC IA Tricon 2 2 2 3503EN2 dL2 TTD OOS TTD Laoo 2 Ch. OOS Switch T433A OOS 24 VDC IA Tricon 2 --2 3 3503EN2 dT433A OOS Loop 3 WR That Oh. OOS Switch T433B OOS -24 VDC IA Tricon 2 2 4 3503EN2 dT433B OOS Laoo 3 WR Tcold Oh. OOS Switch T443A OOS -24 VDC IA Tricon 2 -2 5 3503EN2 dT443A 00S Laoo 4 WR That Oh. OOS Switch T443B OOS -24 VDC IA Tricon 2 -2 6 3503EN2 dT443B OOS Laoo 4 WR Tcald Ch. DOS Switch L460 DOS -24 VDC IA Tricon 2 2 7 3503EN2 dL460 DOS PZR Level Oh. OOS Switch F513 OOS 24 VDC IA Tdicon 2 2 8 3503EN2 dF513 OOS Laoo 1 Steamfiow Ch. OOS Switch F53DOS 24 VDC IA Tricon 2 2 9 3503EN2 dF523_DOS Loop 2 Steamfiow Ch. OOS Switch F533 OOS 24 VDC IA Tricon 2 ~2 10 3503EN2 dF533 DOS Laoo 3 Steamfiow Oh. OOS Switch F543 OOS 24 VDC IA Tricon 2 2 11 3503EN2 dF543_OOS Loop 4 Steamfiow Ch. OOS Switch P515 OOS -24 VDC IA Tricon 2 2 12 3503EN2 dP515 OOS Laoo 1 Steamline Pressure Ch. OOS Switch P525_OOS -24 VDO IA Tricon 2 2 13 3503EN2 dP525 DOS Laoo 2 Steamline Pressure Oh. OOS Switch P535 OOS 24 VDC IA Tricon 2 2 14 3503EN2 dP535 OOS La Steamline Pressure Oh. OOS Switch P545 DOS -24 VDC IA Tricon 2 2 15 3503EN2 dP545 OOS Loop 4 Steamline Pressure Oh. 005 Switch L519_OOS 24 VDC IA Tricon 2 2 16 3503EN2 dL519_OOS SIG 1 Level Oh. OOS Switch L549 00OS 24 VDC IA Tricon 2 2 17 3503EN2 dL549_OOS S/G 4 Level Oh. OOS Switch P506_OOS 24 VDC IA Tricon 2 2 -18 3503EN2 dP506 OOS Turbine Impulse Pressure Oh. OOS Switch PS2SFAIL_16 24 VDC IA Tricon __2 2 19 3503EN2 dPS2SF'AIL 16 Analog Loop Ipt)PwrSuppl PS2S Failure Relay_____
PS7S FAIL 16 24 VDO IA Tricon 2 2 20 3503EN2 dPS7S FAIL 16 Analog Laop Input) Power SuppI PS7S Failure Relay PS3S FAIL_16 24 VDC IA Tricon 2 2 21 3503EN2 dPS3S FAIL 16 Discrete Loop (Input) Power Suppl PS3S Failure Relay PS6S FAIL_16 24 VDC IA Tricon __2 2 22 3503EN2 dPS6S FAIL 16 Discrete Loop (Input) Power Supply PS6S Failure Relay PS4S FAIL 16 24 VDC IA Tricon 2 2 23 3503EN2 dPS4S FAIL_16 Analog Loop Output) Power Suppl PS4S Failure Relay PS5S FAIL 16 24 VDC IA Tricon 2 2 24 3503EN2 dPS5S_FAIL 16 Analog Laoo (Output) Power Suppl PS5S Failure Relay 24D1_PWR 16 24 VDC IA Tdicon 2 2 25 3503EN2 d24Dt PWR 16 Lass of Power to Digtat Input Card TS/421C 120 VAC IA Tncon 2 5 1 3501TN2 dTS421C_TRIP TC-421C Trip Status (DTTA Loop2 2-TS/421G 120VAO IA Tricon 2 5 2 3501TN2 dTS421G TRIP TO-421G Trip Status (DTTA Loop 2)TS/422D 120 VAC IA Tricon 2 5 3 3501TN2 dTS422D TRIP TC-422D Tri Status (DTTA Laoo 2)TS/422G 120 VAC IA Tricon 2 5 4 3501TN2 dTS422G TRIP TO-422G Tnip Status (DTTA Laoo 2)TC433A 120 VAC IA Tricon 2 5 5 3501TN2 dTC433ATRIP TC-433A Tri Status (WR Temp TE-433B)LS/460A 1 120 VAC IA Tdicon 2 5 6 3501TN2 dLS460A TRIP LC-460A Tri Status (PZR Level LT-460)PS/515A 120 VAC IA Tricon __2 __ 5 7 3501TN2 dPS515A TRIP P0-51 5A Trip Status (SIG 1 Steamline Press PT-515) _PS/5150C 120 VAC IA Tnicon 2 5 B 35-01TN2 dPS515C TRIP PC-515COTrip Status (S/GO1 Steamline Press PT-515)PS/525A 120 VAC IA Tricon 2 5 9 3501TN2 dPS525A TRIP PC-525A Trip Status (S/G 2 Steamnline Press PT-525)PS/525C 120 VAC IA Tnicon __2 5 10 3501TN2 dPS525OTRIP P0-5250 Trip Status (SIG 2 Steamline Press _PS/535A -120 VAC IA Tricon 2 5 11 3501TN2 dPS535A TRIP PC-535A Tri Status (S/G 3 Steamline Press PT-535)PS/535C 120 VAC IA Tnicon 2 5 12 3501TN2 dPS535CTRIP P0-5350 Trip Status (SIC 3 Steamnline Press PT-535)PS/545A -120 VAO IA Tricon 2 5 13 3501TN2 dPS545ATRIP PC-545A Tdi Status (SIC 4 Steamline Press PT-545)PS/545C 120 VAC IA Tnicon 2 5 14 3501TN2 dPS545CTRIP PC-5450 Tri Status (SIG 4 Steamline Press PT-545)LS/519A 120 VAC IA Tricon 2 _ 5 15 3501TN2 dLS519A TRIP LO-519A Trip Status (GIG 1 Level LT-519)LSI519B 120 VAC IA Tricon 2 5 16 3501TN2 dLS519BTRIP LC-519B Trip Status (SIG 1 Level LT-519)LS/549A 120 VAC IA Tricon 2 5 17 3501TN2 dLS549A TRIP LC-549A Tri Status (SIG 4 Level LT-549)LS/549B 120 VAC IA Tricon __2 5 18 3501TN2 dLS549B TRIP LC-549B Trip Status (GIG 4 Level LT-549)PS/506A 120 VAC IA Tricon 2 5 19 3501TN2 dPS506A TRIP PO-506A Trip Status (Turb Impulse Press PT-506)PC-506A =Bp 120 VAC IA Tricon 2 5 21 3501TN2 dPC506ABYP Turbine Impulse Pressure High to P138 yass Switch PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 5 of 9 PROTECTION SET II DISCRETE INPUTS INSTRUMENT 
[ SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE TS/421D 120 VAC II Tricon 3 5 1 3501E dTS421D TRIP TC-421D Trip Status (DTTA Loop 2)TS/421H 120 VAC II Tricon 3 5 2 3501E dTS421H HTRIP rC-421H Trip Status (DTTA Loop 2)PS3N FAIL 16 120 VAC II Tricon 3 5 4 3501 E dPS3N FAIL 16 Class II Analog Loop Power Supply PS3N Failure Relay PS5N FAIL 16 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 16 Class II Analog Loop Power Supply PS5N Failure Relay PS2N FAIL 16 120 VAC II Tricon 3 5 6 3501E dPS2N FAIL 16 Isolator Power Supply PS2N Failure Relay PS6N FAIL 16 120 VAC II Tricon 3 5 7 3501E dPS6N FAIL 16 Isolator Power Supply PS6N Failure Relay 11/12/2013
___________
______ ___ _________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 6 of 9 I 1 ~ 1 rI Ct.+ l OC I n UU I I'U I  Ik I I,4O I flUIVI INP I ] 1 3 I T r"1 f l. I.,L.M rKLA,~~UNI 
~MA~I~ I ~LUI J ~M LANU I t}
UN[I. UN TYPE 1 I 1 1 t I T I 1 I r M-4100 0t 4-zu mA IA, Ulverse-A A 1 1 421 vF-I415 A Reactor Coolant Flow Loop 1 to FI-415 (VB82) via FM-415B1 (Isolator)
Reactor Coolant Flow Loon 2 to FI-42C (VR21 vin FM--4PRR 1 FM-425B 4-20 mA IA Diverse-A A 1 2 421 vFl425 A TE-433A 4-20 mA f BA,1 Diverse-A A 8 1 421 y'TE433A A Loop 3HotbL............
r ........ ........... 
.% ........ /gTemp (to PS2 Tncon)I =431: 4-20 mA IA TE-420B 4-20 mA TE-420A 4-20 mA IA IA IA IA Diverse-A Diverse-A Diverse-A Diverse-A Diverse-A k IA 8 3 421 yTE420B A DTTA Loop 2 Tcold-1 (to PS2 Tdicon) ___A 8 4______ 421_____ yTE20_ADTA Lop2 ho-l (t P2 rion A 8 1 45 421 j yTE421A A DTTA Loop 2 Thot-2A (to PS2 Tricon)A 8 2 421 vTE433B A Loon 3 Cold Len Temo (to PR2 Tdonnnt TE-421A 4-20 mA TE-422A 4+,;k A 8 C 421 I vTF422A A r')TTA I nnn 2 Thnt-3A (tn PR9 Tritnnn,... ......... 
.. ..=-4 ... 4 ,.... ......-,. .. ..k......~*-~- 
~ --' -...- -... L _FM-435B FM-445B Diverse-B B 1 I 1 I 421 yFI435_B Reactor Coolant Flow Loop 3 to FI-435 (VB2) via FM-435B 1 (Isolator)
Diverse-B B 1 I 2 I 421 TE-443A 4-20 m,.yFI445 B Reactor Coolant Flow Loop 4 to FI-445 (VB2) via FM-445B 1 (Isolator)
____yTE443AB Loop 4 Hot Leg Temp (to PS2 Triconl B 8 I 1 I 421 TE-443B 4-20 m+TE-421 B TE-420C 4-20 mA 4-20 mA IA TE-421C J 4-20 mA L IA TE-422C I 4-20 mA IA Diverse-E B '421 -TE443B B Loop 4Cold Le Temp to PS2 Tricon)B 8 3 421 -yTE421 B B DTTA Loop 2 Tcold-2 (to PS2 Tricon)B 8 5 421 -yTE42ICB DTTA Loop 2 Thot-2B (to PS2 Tricon)B 8 6 421 -yTE422C B DTTA Loop 2 Thot-3B (to PS2 Tricon)1 5 1 3805HN yTR433 RED Loop 3 Hot Leg Temp to TR-433 (VB2), ERFDS (VB1) & RVLIS (PAM3) -___1 5 _ 2 3805HN yTR443 BLU Loop 4 Cold Leg Temp to TR-443 8%t2), ERFDS 8V1)1 __ 5 3 3805HN 1F523 Loop 2 Steamfiow to FM-523_2 (Isolator)
TM-433AI 4-20_ mA IBA,1 Trio TM-443B 4-20 mA IB,A,1 Tricon FM-523D 4-20 mA IA Tricon FM-543D 4-20 mA+ -.IA Tricon Tricon 1 1 5 4 3805HN I yFI543 Loop 4 Steamfiow to FM-543 2 (Isolator)
--- 4 T M-433Bz 4-20 mA IBA.1 A 1 3Rf>+ltJIH vTPA33.' RIlI tnon 3 C+nId I Tnrmn In TlPA5:1 O/P/9\ 1:u1r:1c  TM-443A 4-20 mA BA,1 Tricon __I 6 2 3805HN yTR443 RED Loop 4 Hot Leg Temp to TR-443 (VB82), ERFDS (VB61) & RVLIS (PAM3)FM-513D 4-20 mA IA Tricon 1 6 3 3805HN yF1513 Loop 1 Steamfiow to FM-'513 2 (Isolator)
FM-533D 4-20 mA IA Tricon __1 ~ 6 4 3805HN yFI533 Loop 3 Steamflow to FM-533 2 (Isolator)
TM-421E 4-20 mA ___II __ Tricon 3 2 1 3805E yTI421A Delta-T to Tl-421A (VB2) & aTM421E (RN04A)TM-421F 4-20 mA II ___ Tricon 3 2 2 3805E yTI421B Overpower Setpoint to T/411A (CCl) &TI-421B (VB2)TM-421G 4-20OmA I1 Tricon 3 2 3 3805E yTI421C iOvertemp Setpoint to T/411A (CC1) & TI-421C 8V2)TM-422F 4-20 mA II Tricon 3 2 4 3805E yTI422 iTavg to TI-422 (VB2) & aTM422F (RN04A)PM-506A 4-20 mA II Tricon 3 -2 5 3805E yPI506 ITurbine Impulse Pressure to P1-506 VB3)LM-M48 4-2~-0-A B, Thei 8, 2 _____ ..-LT-460 Input 4-20 mA BA,1 (7) N/A N/A N/A N/A N/A iPZR Level to LI-460A (VB2), LI-460B (HSP)LM-460 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 02 (VB1'PM-456_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Pressure to P1-456 (VB82), PZR Pressure Control (Control Set 1)FM-513 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 1 Steamflow to DFWCS FM-513_2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 1 Steamflow to FI-513 (VB63) & ERFDS (VB81)FM-523 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamflow to DFWCS FM-523 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamfiow to FI-523 (VB83) & ERFDS (VB1)FM-533_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to DFWCS FM-533_2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to FI-533 (VB63) & ERFDS (VB84)FM-543 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A ;Loop 4 Steamfiow to DFWCS FM-543 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 4 Steamflow to FI-543 (VB3) & ERFDS (VB84)PT-515 Input 4-20 mA lB,A,1 (7)~ N/A N/A N/A N/A N/A Loop 1 Steamline Pressure to PI-515 8V3), ERFDS VB4)PM-515 1 4-20 mA II Isolator Out N/A [N/A N/A N/A N/A Loop 1 Steamline Pressure to DFWCS PT-525 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Loop2 Steamline Pressure to PI-525 (VB3), ERFDS (VB81)PM-525 1 4-20 mA II Isolator Out N/A LN/A N/A N/A N/A Loop 2 Steamline Pressure to DFWCS PT-535 Input 4-20 mA lB.A,1 (7 N/A N/A N/A N/A N/A Loop 3 Steamline Pressure to PI-535 (VB83), ERFDS (VB81)PM-535_ I 4-20 mA II Isolator Out N/A N/A IN/A N/A N/A___L.oop 3 Steamline Pressure to DFWCS Inon 4 Atnnnmlino=
In (11P31 cI=:ne 0 mA IB.A 1 (7'N/A N/A IN/A IN/A 0 mA II Isolator Out N/A L~ N/ N/ N/ N/ i~o 4 taln Pressure to DFWCS ___
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 7 of 9 PROTECTION SET It ANALOG OUTPUTS INSTRUMENT SIGNAL TYPE INST. CLASS IPROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION _______________
TAG ____ _____TYPE_____________
____________
LM-519 1 4-20 mA II ___ Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to LI-519 (VB39, DFWCS, AFW ____________
LM-549 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to LI-549 (VB3), DFWCS, AFW LM-549_2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to AMSAC PT-936 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Corntainment Pressure to PI-936 CVB1), ERFDS (/B1)PM-506_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Turbine Impulse Pressure to AMSAC FM-415B 1 4-20 mA II Isolator Out N/A N/A N/A N/A ___ N/A Reactor Coolant Flow Loopo ito FI-415 (VB2)FM-425B 1 4-20 mA j II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 to F1--425 (VB2)FM-435B 1 4-20 mA II 7 Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 to FI-435 (VB2)FM-445B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 1 to FI-445 (VB2) ________ ___11/12/2013 J _______ _____________
____ ___
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 8 of 9 PROTECTION SET II DISCRETE OUTPU"-~ ...~.. --INSTRUMENT i INST. CLASS I O I"(tUIA I IUrN I'U~L;-URK IL; I U;AhU I L, 11I'JNNcL IUNL I IUN TAG VOLTAGE ITYPE UY-P2AIV-
____ 25 VC Dvere-A A 2- 1/ 40 cP2A IV PPSII hasis Trubl UY-PS2CDIV-A II -125 VDC Diverse-A A 2 3/4 402 cPS2C.ADIV A PPS II Chassis A Failure UY-PS2BDIV-A II125 VDC Diverse-A A 2 3/6 402 cPS2B DIV A PPS II Chassis A Channinupr s UY-PS2D.,DIV-A II125 VDC Diverse-A A 2 7/8 402 cPS2D DIV A PPS II Chassis A Out of Service FC-41 S A IA 120 VAC Diverse-A A 9 1 402 cFC41 5 A Loop 1 Low Flow Rx Trip (SSPS)FC-425 A IA 120 VAC Diverse-A A 9 2 402 cFC425_A Loop 2 Low Flow Rx Trip (SSPS)FC-435 A IA 120 VAC Diverse-A A 9 3 402 cFC435 A Loop 3 Low Flow Rx Trip (SSPS)FC-445 A IA 120 VAC Diverse-A A 9 4 402 cFC445 A Loop 4 Low Flow Rx Trip (SSPS)PC-456CA IA 120 VAC Diverse-A A 9 5 402 cPC456C A PZR Pressure Low Rix Trip (SSPS)PC-456B A IA 120 VAC Diverse-A A 9 6 402 cPC456B A Unblock SI, P11 (SSPS)PC-456A_A IA 120 VAC Diverse-A A -9 7 402 cPC456A_A PZR Pressure High Rx Trip (SSPS)PC-456D A IA 120 VAC Diverse-A A 9 8 402 cPC456D A PZR Pressure Low-Low SI (SSPS)PC-456E A IA 120 VIAC (11) Diverse-A A 9 9 402 cPC456E A PZR Pressure High -PORV (RNASA)PC-936A A IA 120 VAC Diverse-A A 9 _10 402 cPC936AA Ctmt Press High SI, Ph A Isin (SSPS)PC-936B A IA 48 VDC Diverse-A A -9 11 402 cPC936B A Ctmt Press High-High Ctmt Spray, Ph B sIln (SSPS)LOOP PULSE A II 48 VDC Diverse-A A 10 1 102 cPULSEA PPS IIA System Timebase Frame Rate Output UY-PS2A DIV-B II 125 VDC Diverse-B B 1/2 402 cPS2A DIV B PPS II Chassis B Trouble UY-PS2CDIV-B II 125 VDC Diverse-B B __ 2 3/4 402 cPS2C DIV B PPS II Chassis B Failure UY-PS2B DIV-B II 125 VDC Diverse-B B 2 _5/6 402 cPS2B DIV B PPS II Chassis B Channel in Bypass UY-PS2D DIV-B II 125 VDC Diverse-B B -2 7/8 402 cPS2D DIV B PPS II Chassis B Out of Service FC-45 5B IA 120 VAC Diverse-B B -9 _ 1 402 cFC415 B Loop 1 Low Flow Rx Trip (SSPS)FC-425 B IA 120 VAC Diverse-B B -9 2 402 cFC425 B Loop 2 Low Flow Rx Trip (SSPS)FC-435 B IA 120 VAC Diverse-B B 9 3 402 cFC435 B Loop 3 Low Flow Rx Trip (SSPS)FC-445 B IA 120 VAC Diverse-B B -9 4 402 cFC445 B Loop 4 Low Flow Rx Trip_ (SSPS)PC-456C B IA 120 VAC Diverse-B B 9 5 402 cPC456C B PZR Pressure Low Rx Trip (SSPS)PC-458B B IA 120 VAC Diverse-B B 9 6 402 cPC456B B Unblock SI, P11 (SSPS)PC-456A B IA 120 VAC Diverse-B B -9 7 402 cPC456A B PZR Pressure High Rx Trip (SSPS)PC-456D B IA 120 VAC Diverse-B B 9 8 402 cPC456D B PZR Pressure Low-Low SI (SSPS)PC-456E B IA 120 VAC (11) Diverse-B B -9 9 402 cPC456E B PZR Pressure High -PORV (RNASA)PC-936A B IA 120 VAC Diverse-B B 9 10 402 cPC936A B Ctmt Press High SI, Ph AlsIn (SSPS)PC-936B B IA 48 VDC Diverse-B B -9 11 402 cPC936BB Ctmt Press High-High Ctmt Spray, Ph B Isin (SSPS)LOOP PULSE B II 48 VDC Diverse-B B 10 1 102 cPULSE B PPS lIB System Timebase Frame Rate Output TC-421G IA 120VAC Tricon __2 6 1 3601TN cTC421G OPDT Rx Trip (SSPS)TC-422D IA 120 VAC Tricon __2 6 2 3601TN cTC422D Tavg Low-Low P12 (SSPS)TC-433A IA 120 VAC Tricon __2 -6 3 3601TN cTC433A Loop 3 Cold Leg Temp. Low -LTOPS (RNASA)LC-519A IA 120 VAC Tricon 2 6 4 3601TN cLC519A S/G 1 High-High Level Turbine Trip, FW sIsn P14 (SSPS)LC-549B IA 120 VAC Tricon 2 6 5 3601TN cLC549B S/G 4 Low-Low Level Rx Trip & AFW Pump Stari (SSPS)PC-506A IA 120 VAC Tricon __2 6 6 3601TN cPC506A Turbine Impulse Pressure High to P13 (SSPS)PC-5I1SC IA 120 VAC Tricon 2 6 7 3601TN cPC515C Loop 1 Stmline Press High Negative Rate Stmline Isin (SSPS)PC-525A IA 120 VAC Tricon 2 6 8 3601TN cPC525A Loop 2 Low Stmline Press SI & Stmline sIsn (SSPS)PC-535C IA 120 VAC Tricon 2 6 9 3601TN cPC535C Loop 3 Stmline Press High Negative Rate Stmline sIsn (SSPS)PC-545A IA 120 VAC Tricon 6 10 3601TN cPC545A Loop 4 Low Stmline Press SI & Stmline sIsn (SSPS)TC-421C IA 120 VAC 120 VAC Tricon 2 711 3601TN cTC421C 0101 Rx Trip (SSPS)TC-422G IA Tricon 2 LC-460A 2 IA 120 VAC Tdicon 2 01TN cLC460A 4PZR Level High Rx Trip (SSPS)LC-5 19B IA 120 VAC Tricon 2 Tricon 2 7 7 4 3601TN 5 3601Tk cLC519BB cLC549A S/G 1 Low-Low Level Xx Tdio & AFW Pumo Start ('SSP-SI LC-549A IA 120 S/G 4 Hiah-Hiah Level Turbine Trio. FW sIsn P14 fSSPSI PC-515A IA 120\PC-525C IA 120 'v 6 3601TN cPC515A Loop 1 Low Stmline Press SI & Stmline Isin (SSPS)7 3601TN cPC525C Loop 2 Stmline Press High Negative Rate Stmline sIln (SSPS)8 3601TN cPC535A Loop 3 Low Stmline Press SI & Stmline lIsn (SSPS)9 3601TN cPC545C Loop 4 Stmline Press High Negative Rate Stmline Isin SSPSI PC-535A IA 120 VAC 7 7 PG-.E45C IA 120 VAC PC-FAriC IA I 2fl VAC --I-PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 9 of 9 PROTECTION SET UI DISCRETE OUTPUTS INSTRUMENT INST. CLASS NTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE TYPE _____________________
LY-519H II 125 VDC Tdcon 3 7 1 3636T cALM1470 PPS IIS/G Low-Low Level TTD Timer Actuated Alarm PK0605 UY-PS2A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1468 PPSllITrouble Alarm PK(0604 UY-PS2BTRICON II 125 VDC Tricon 3 7 3 3636T cALM1469 PPS II Channel in Bypass Alarm PK0602 UY-PS2C_TRICON II 125 VD3C Tricon 3 7 4 3636T cALM1467 PPS II Failure Alarm PK(0601 TY-421._TRICON II 125 VDC Tricon 3 7 5 3636T cALM1471 PPS II RTD Failure Alarm PK(0603 OOSIITRICON II 125 VDC Tricon 3 7 6 3636T cALM0735 PPS II Channel OOS Alarm PK(0607 120 VAC Tricon 3 7 14 3636T SpareI 120 VAC Tricon 3 7 15 3636T cTC421D OTDT Interlock C3 (RNARA)TC-421H II120 VAC Tricon 3 7 16 3636T cTC421H OPDT Interlock 04 (RNARA)11/12/2013 PPS Interface Requirements Specification, Rev 9 Appendix 4.3_____________Sheet 1 of 8I!I CAL. RANGE J EU PROCESSOR CHASSIS F SLOT CH [CARD TAGNAME (5~TAG {+_I TP TE-430B 200 OHM RTD IA 350-650 Diverse-A A S, 5 3 311 (w)aTE430B A DTTA Lo(op 3 Tcold-1 (for RTD conversion to mA)1 TE40 00OMRD A30 80' ivreA 5 4 31 (waE3Ar TALop3To-1AfrRDcnvrint -A TE'430A 200 OHM RTD IA 350-" 650 'F Diverse-A 
._. A 5 5 311 (w)aTE430A A DTTA Loop 3 Thot-lA (for RTD conversion to mA)TE-431A 200 OHM RTD ___IA 350 -650 &deg;F Diverse-A "A i5 6 311 (w aTE431A A DTTA Loop 3 Thot-3A (for RTD conversion to mA)TE-432A 4200 OMA (3) IA 30 -100 XMRFp Diverse-A 6 1 321 (waFTE432A A ReaTor Coolant3Flow-3 Loop 1T ovrintA FT-416 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A 
! A !6 2 321 (w)aFT416DP A Reactor Coolant Flow Loop 2 FT-426 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 321 (w)aFT436DP_A Reactor Coolant Flow Loop 32__FT-436 4-20 mA (3) IA ~ 0 -100 XMTR dp% Diverse--A A 6 4 321 (w)aFT436DP A Reactor Coolant Flow Loop 4 PT--457 4-20 mA (3 IA 1250 -2500 psig Diverse-A 
/ A -6 5 321 (w)aPT457 A PZR Pressure__PT-935 20 mA +/-3) IA 55 psig Diverse-A A 6 6 321 (w aPT935 A Containment Pressure TE-431 B 200 OHM RTD ___IA 350 -650 'F Diverse-B B -5 3 311 (w)aTE431 B B DTTA Loop 3Tcold-2 (for RTD COnversion to mA)TE-430C 200 OHM RT=D IA 350 -650 &deg;F Diverse-B i B i5 4 311 (w)aTE430C B DTTA Loop 3 Thot-1 B (for RTD conversion to mA)TE-4310C 200 OHM RTD IA 350- 650 'F Diverse-B , B 5 5 311 (w)aTE431 CB DTTA Loop 3 Thot-2B (for RTD conversion to mA)TE-432C 200 OHM RTD IA 350 -650 &deg;F Diverse-B
_... 5 6 311 (w)aTE432C B DTTA Loop 3 Thot-3B for RTD conversion to mA)FT-41 6 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 6 1 321 (w)aFT41 6DP B Reactor Coolant Flow Loop 1 FT-426 4-20 mA (3) IA 0 -100 XMTR dtp% Diverse-B i B 6 2 321 (w)aFT426DP B Reactor Coolant Flow Loop 2 FT--436 4-20 mA (3) IA ___ 0 -100 t-XMTR dp% Diverse-B B 6 3 321 (w)aFT436DP B Reactor Coolant Flow Loo 3 FT-446 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 4 321 (w)aFT446DP B Reactor Coolant Flow Loop 4 PT-457 4-20 mA (3) IA 1250 -2500 psig Diverse-B B 6 5 321 B PZR Pressure PT-935 4-20 mA (3 IA 55 psij Diverse-B B 6 6 321 (w)aPT935 B Containment Pressure NE-43A 0-10 VOC IA 0 -120 Tricon 1 2 1-3703EN (w)aNE43A DTTA Lop 3 Upper (Neutron)
Flux __NE-43B 0-10 VDC IA 0 -120 _____ Tricon 1 2 23703EN (w)aNE43B DTTA Loop 3 Lower (Neutron)
Flux Tricon 1 3 1 3721N ________________
_____________________
_ Tricon 1 3 2 3721N Spare _TE-430B _ 4-20OmA (3) IA...._IA 510 -630 &deg;F Tricon -1 3 3 3721N (w)aTE4308 DTTA Loop 3Tcold-1 _______TE-430A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 4 3721N (waTE430A DTTA Loop 3 Thot-lA TE-431A 4-20 mA (3) IA 530 -650 'F Tricon 1 3 5 3721 N (w aTE431A DTTA Loop 3 Thot-2A__TE--432A 4-20 mA (3. ____ IA 530 -650 &deg;F Tricon 1 3 6 3721N (w)aTE432A DTTA Loop 3 Tot-3A PT-457 4-20 mA (3) IA 1250 -2500 psi Ticon 1 3 7 3721N (w)aPT457 DTTA Loop 3 PZR Pressure_____ ___________
______Tocon 1 3 8 3721N Spare_____Tricon 1 ..... 3 9 3721 N S are PT-526 4-20 mA (3) IA 0120psij Tricon 1 3 10 3721N (w)aPT526 Loop 2 Steamline Pressure_____ ___ __ Tricon 1 -3 11 3721N __Spare ________-LT-528 4-20 mA (3) IA 0 -100 %Tricon 1 3 12 3721N (w)aLT528 S/G 2 Level LT-548 4-20 mA 3) IA 0 -100 %Tricon 1 3 13 3721N (w aLT548 S/G 4 Level PT-403A 4-20 mA (3). IA 0 -3000 psig Tricon 1 3 14 3721 N (waPT403_A._vvlde Range Pressure Loop 4________ ________ ________Tricon 1 3 15 3721N Spare __________________
___Tricon 1 4 1 3721N Spare_________
__________________________Tricon 1 4 2 3721N Spare __________________
TE-431B 4-20OmA (3) IA 510 -630 'F Tricon 1 4 3 3721N (w)aTE431B DTTA Loop 3Tcold-2 TE-430C 4-20 mA (3) ... IA 530 -650 'F Tricon + 1 4 4 3721 N (w)aTE430C t DTTA Loop 3 Thot-l B TE--431C 4-20 mA (3) IA 530-8650 'F Tricon 1 .4 5 3721N (w aTE431C DTTA Loop 3 Thot-2B TE-432C 4-20 mA (3) IA 530 -650 'j F Tncon 1 4 6 3721 N (w)aTE432C DTTA Loop 3 Thot-3B LT-461 4-20 mA (3) IA 0 -100 i %______ Tricon 1 1 4 7 3721N (w aLT461 PZR Level_________________
________ ________Tricon 1 i4 8 3721N Spare _________________
Tricon i ____T4 9 3721N _Sp~ae PT-536 4-20 mA (3) IA 0 -1200 psig Thcon 1 4 10 3721N (w aPT536 Loop 3 Steamline Pressure____________________
_________
_________Tricon I 1 1 4 11 3721N Spare __________________
LT-518 4-20 mA (3) IA 0- 100 %Tricon '1. 12 3721N (w)aLT518 S/G 1 Level ____________
LT-538 4-20 mA (3) IA 0 -100 %______ Tricon 11 4 13 3721N (w)aLT538 S/G 3 Level PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 2 of 8 PROTECTION SET III ANALOG INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG _______TYPE PT-403 4-20 mA (3) IA 0 -3000 psig Tricon 1 4 14 3721 N (w)aPT403 Wide Range Pressure Loop 4 PM--403A 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Wide Range Pressure Loop 4 LM-461 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level PM-526 1 4-20 mA -IA NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamline Pressure PM-536_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamline Pressure LM-518 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-528 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-528_2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-538 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level LM-548 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level PM-457_1 4-20 mA IA NA NA Isolator N/A -N/A N/A N/A N/A PZR Pressure FM-416B 1 4-20 mA IA NA NA Isolator -N/A -N/A N/A N/A N/A Reactor Coolant Flow Loop 1 Normalized FM-426B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-436B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized FM-446B 1 4-20 mA IA NA NA Isolator -N/A -N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 11/12/2013
__________________________________________
PPS interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 3 of 8 E INPUTrS__
_ _ _ __ _ 1 11 ___I_ _ _ _ _ _I_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _LTYPE [INST. CLASSI PROCESSOR CHASSISLSLOT~
CH CARD TAGNAME ICHANNEL FUNCTION TAG TYPE FC-416_FRLSMA 48 VDC IA Diverse-A A 7 1 302 dFC416 LSMA Loop 1 Low Flow Rx Trip LSM A Feedback FC-426 FB LSM A 48 VDC IA Diverse-A A -7 2 302 dFC426_LSMA Loop 2 Low Flow Rx Trip LSMA Feedback FC-436_FRLSMA 48 VDC IA Diverse-A A 7 3 302 dFC436 LSMA Loop 3 Low Flow Rx Trip LSM A Feedback FC-446 FR LSM A 48 VDC IA Diverse-A A 7 4 302 dFC446 LSMA Loop 4 Low Flow Rx Trip LSMA Feedback P0-4570_FBLSMA 48 VDC IA Diverse-A A 7 5 302 dPC457C LSMA PZR Press Low Rx Trip LSM A Feedback PC-457B FB LSM A 48 VDC IA 4 Diverse-A A 7 6 302 dPC457B LSMA Unblock SI, P11 LSM A Feedback PC-457AFBLSMA 48 VDC IA Diverse-A A 7 7 302 dPC457A LSMA PZR Press HihR rp LSM A Feedback_________
PC-457D FRLSMA 48 VDC IA Diverse-A A 7 8 302 dPC457D LSMA PZR Press Low-Low SI LSM A Feedback PC-457E FR LSM A 48 VDC IA Diverse-A A -7 9 302 dPC457E LSMA PZR Press High -PORV LSM A Feedback PC-935AFR LSM A 48 VDC IA Diverse-A A 7 10 302 dPC935ALSMA Ctmt Press H hSI, Ph A slan) LSM A Feedback PC-935B FR LSM A 48 VDC IA Diverse-A A 7 11 302 dPC935RLSMA Ctmnt Press High-High (Ctmet Spray, Ph R lIsn) LSM A Feedback FC-416_Byp A 48 VDC IA Diverse-A A 7 12 302 dFC416 BYPA L~oo 1 Low Flow Rx Trip RypA Switch Status FC-426_BypA 48 VDC IA Diverse-A A 7 13 302 dFC426 BYPA Loop 2 Low Flow Rx Trip Ryp A Switch Status FC-436 BypA 48 VDC IA Diverse-A A 7 14 302 dFC436 RYPA Loop 3 Low Flow Rxc Trip RypA Switch Status FC-446 BRByp A -48 VDC IA Diverse-A A 7 15 302 dFC446 RYPA Loop 4 Low Flow Rx Trip BypA Switch Status PC-4570_Byp A 48 VDC IA Diverse-A A 7 18 302 dPC457C RYPA PZR Press Low Rx Tri Ry A Switch Status PC-457R Byp A, 48 VDC IA Diverse-A A -7 17 302 dPC457R RYPA Unblock SI, P11 Byp A Switch Status PC-457ABypA 48 VDC IA Diverse-A A -7 18 302 dPC457A_RYPA PZR Press Hi p ___AwichSttu PC-457DBypA 48 VDC IA Diverse-A A 7 19 302 dPC457D RYPA PZR Press Low-Low SI Byp A Switch Status__PC-457E Ryp A 48 VDC IA Diverse-A A 7 20 302 dPC457E RYPA PZR Press High -PORVB yp A Switch Status PC-935ABypA 48 VDC IA Diverse-A A 7 21 302 dPC935A RYPA Ctmt Press Hi h (SI, Ph A Ilan) RyA Sw Status PC-935RByp A 48 VDC IA Diverse-A A 7 22 302 dPC935R RYPA Ctmt Press Hi h-Hi h (Ctmt Spray Ph 8 lIsn) RyA Sw Status PS3FAIL IlilA 48 VDC IA Diverse-A A -7 24 302 dPS3FAL IliA ALS-A Chassis Power Supply 1 Failure (+48VA)_______
PS6FAIL lIlA 48 VDC IA Diverse-A A 7 25 302 dPS6FAIL lilA ALS-A Chassis Power Supply 2 Failure (+48VB)PSiFAIL lnlA 48 VDC IA Diverse-A A 7 26 302 dPS1FAIL lIlA Analog Input Loop Power Supply 1 Failure PS4FAIL IlilA 48 VDC -IA Diverse-A A -7 27 302 dPS4FAIL IlilA Analo Input Loo Power Supl 2 Failure PS2FAILilA 48 VDC IA Diverse-A A 7 28 302 dPS2FAILIIlA ALS Contact Weh.tting Supply 1 Failure PS5FAIL lIliA 48 VDC IA -Diverse-A A -7 29 302 dPS5FAIL lIlia ALS Contact Wetting Supply 2 Failure PPS Ill Alarm Clear A 48 VDC IA Diverse-A A 10 1 102 dALMCLR lilA PPS Ill A Alann Clear Switch Status PPS Ill TARStatusA 48 VDC IA Diverse-A A 10 2 102 dTABSTAT Ilila PPS IlIiATAR Enable Status FC-416_FRLSMB 48 VDC IA Diverse-B B 7 1 302 dFC416 LSMR Loop 1 Low Flow Rx Trip [SMB Feedback FC-426_FRLSMB 48 VDC IA Diverse-B B 7 2 302 dFC426 LSMR Loop 2 Low Flow Rx Trip LSM B Feedback FC-436_FRLSMB 48 VDC IA __ Diverse-B B 7 3 __302 dFC436_LSMB -Loop 3 Low Flow Rx Trip LSMR Feedback FC-446_FRLSMB 48 VDC IA Diverse-B B -7 4 302 dFC446 LSMB Loop 4 Low Flow Rx Trip LSM B Feedback PC-57C FR=LM 48 VDC IA Dinverse-B 
=B _ 7 5 302 dPC457C LSMB PZR Press Low Rx Trip LSM B Feedback PC-457R FR LSM B 48 VDC IA -Diverse-B B 7 6 302 dPC457BLSMB Unblock SI, P11 LSMB Feedback PC-457A FR LSM B 48 VDC IA -Diverse-B B 7 7 302 dPC457ALSMB PZR Press High Rx Trip LSM B Feedback PC-457D_FRLSM B 48 VDC IA Diverse-B B -7 8 302 dPC457D LSMB PZR Press Low-Low SI LSM B Feedback PC-457E FR LSM B 48 VDC IA -Diverse-B B 7 9 302 dPC457ELSMR PZR Press High -PORV LSMB Feedback PC-935A FB LSM B 48 VDC IA Diverse-B B 7 10 302 dPC935A LSMB Ctmt Press High (SI, Ph A slan) LSM B Feedback PC-935RFR_LSM_8 48 VDC IA ~Diverse-B B 7 11 __302 _ dPC935B LSMB Ctmnt Press Spray, Ph B lIln) LSM B Feedback_FC-416_BypB 48 VDC IA Diverse-B B 7 12 302 dFC416 RBYPB Loop 1 Low Flow Rx Tdp Byp B Switch Status FC-426 Byp B 48 VDC IA Diverse-B B 7 13 302 dFC426 BYPB Loop 2 Low Flow Rx Trip RypBR Switch Status FC-436_BypB 48 VDC IA Diverse-B B -7 14 i302 dFC43R BYPB Loop 3 Low F low Rx Trip BypB Switch Status F0-446_RypR 48 VDC IA Diverse-B B -7 15 302 d FC446..BYPB Loop 4 Low Flow Rx Trip Byp B Switch Status PC-4570_RypB 48 VDC IA Diverse-B B 7 16 = 302 dPC457CBYPB PZR Press Low Rx Trip Byp B Switch Status PC-457BBypB 48 VDC IA Diverse-B B 7 17 302 dPC457B BYPR Unblock SI, P11 BypB Switch Status PC-457ABypB 48 VDC IA Diverse-B B 7 18 302 dPC457A BYPB PZR Press High Rx Trip Ryp B Switch Status PC-457D BypB 48 VDC IA Diverse-B B 7 19 302 dPC457D BYPB PZR Press Low-Low Si Byp B Switch Status PC-457EBypB 48 VDC IA I Diverse-B B 7 2 302 "dPSc45EBYPB=
PZR Press High -PDRV Byp B Switch Status PC-935ABypB 48 VDC IA Diverse-B B 7 21 302 dPC935A BYPB Ctint Press High (SI, Ph A slan) BypB Sw Status PC-935BBypB 48 VDC __IA Diverse-B B ...7 22 302_ dPC935B_BYPB Ctnt~ Hres h-i (Clint Spray, Ph B slin) Sw Status PS3FAIL 111B 48 VDC ~IAj Diverse-BI B 7 24 302 dPS3FAIL 1I1B ALS-A Chassis Power Supply 1 Failure (+48VA)
PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 4 of 8 PROTECTION SET II1 DISCRETE INPUTS ____ ______________l________
INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE PS6FAIL IIIB 48 VIDC IA Diverse-B 8 7 25 302 dPS6FAIL !lIBt ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAIL 1118 48 VDC IA Diverse-B B 7 26 302 dPS1FAIL 1118 Analog nutLopPwe 1 Failure_PS4FAIL_1II8 48 VDC IA Diverse-B B 7 27 302 dPS4FAIL_1118 Analog Input Loop Power Supply 2 Failure-PS2FAIL 1I18 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL IIIB ALS Contact Wetting Supply I Failure ________PS5FAIL 111B 48 VDC IA Diverse-B B 7 -29 302 dPS5FAIL 1118 ALS Contact Welting Supply 2 Failure PPS Ill Ajarm_Clear_B 48 VDC IA Diverse-B B 10 1 102 dALMCLRII1B PPS IlI B AjarmClear Switch Status PPS Ill TAB Status B 48 VDC IA Diverse-B B 10 2 102 dTABSTAT_1IIB PPS IIl B TAB Enable Status LP3 DTTA 006 24 VDC IA Tricon 2 2 1 3503EN2 dL3 DTTA OOS DTTA Loop 3 Ch. OOS Switch LP3" TTD 24 VDC IA Tricon 2 2 2 3503EN2 dL3_TTD QOS 3 Ch. OOS Switch ___L548 OOS 24 VDG IA I Tricon __2 2 3 3503EN2 dL548 00S 5/G 4 Level OOS Switch L461 OOS 24 VDC __IA Tricon ._2 .....2 7 3503EN2 dL461 OOS PZR Level Ch. OOS Switch P403 OOS 24 VDC IA Tricon 2 2 9 3503EN2 dP403 DOS ltide Range Pressure Loop 4 Ch. OOS Switch P403A OOS 24 VDC IA Tricon 2 2 10 3503EN2 dP4O3A DOS W~de Range Pressure Loop 4 Ch. OOS Switch 24 VDCG 2 2 11 3503EN2 _- Spare_________
24 VDC/2 2 12 3503EN2 Spare P526 00S 24 VDC IA Tricon 2 2 13 3503EN2 dP526 OOS Loop 2 Steamline Pressure Ch. OOS Switch P536 OOS 24 VDC IA Tricon _ 2 2 14 3503EN2 dP536 OOS Loop 3 Steamline Pressure Ch. OOS Switch__________
24 VDC ____________
2 2 1i5- 350)3E N2 Spare ________________________
L518 DOS 24 VDC IA Tricon 2 2 16 3503EN2 dL518 OOS SIG 1 Level OOS Switch L528 OOS 24 VDC IA T Tricon 2 2 17 3503EN2 dL5280ODS SIG 2 Level OOS Switch L538 OOS 24 VDC IA Tricon 2 2 18 3503EN2 dL538_006 S/G 3 Level OOS Switch PS2S FAIL 17 24 VDC __IA Tricon 2 2 19 3503EN2 dPS2S FAIL_17 Analog Loopp(Inpu Pwr upl PS2S Failure Relay PS75 FAIL 17 24 VDC IA Tricon 2 2 20 3503EN2 dPS7S FAIL 17 Analog Loop (Input) Power Supply PS7S Failure Relay PS3S FAIL 17 24 VDC IA i Tricon 2 2 21 3503EN2 dPS3S FAIL 17 Discrete Loop (Input) Power Supply PS3S Failure Relay PS6SFAIL_17
__24 VDC IA Tricon___
2 2 22 3503EN2 dPS6S FAIL 17 Discrete Loop (+Input) Po~werSuppl/
PS6S Failure Relay__________
24 VDC IA Tricon 2 2 23 3503EN2 Sare ___________________________
24 VDC _ IA Tricon 2 2 24 3503EN2 __Spare -___24D1 PVVR 17 24 VDC IA i Tricon 2 2 25 3503EN2 d24DI PWR 17 Loss of Power to Digital Input Card TS/43tC 120 VAC IA Tricon 2 5 1 3501TN2 dTS431CTRIP TC-431CTripStatuslDTTlALoop 3)TS/431G 120 VAC IA Tncon __2 5 2 3501TN2 dTS431CTRIP TC-431G Trip Status (DTTA Loop 3)TS/432D 120 VAC IA Tricon 2 5 3 3501TN2 dTS432D TRIP TC-432D Trip Status (DTTA Loop 3)TS/432G 120 VAC __IA Tricon 2 5 4 3501TN2 dTS432G TRIP TC-432G Trip Status (DTTA Loop 3)PC403A 120 VAC IA Tricon 2 5 5 3501TN2 dPC403ATRIP PC-403A Trip Status (WR Press PT-403A)LS51548A 120 VlAG IA Tricon 2 _ 5 6 3501TN2 dLS548A TRIP LC-548A Trip Status (S/G 4 Level LT-548)PC4038 120 VlAG IA Tricon 2 5 7 3501TN2 dPC403BTRIP P0-4038 Trip Status IWR Press PT-403A)PC4O3D 120 VlAG IA Tricon 2 5 8 3501TN2 dPC403DTRIP PC-403D Trip Status (WR Press PT-403A)PS/526A 120 VlAG IA Tricon _._+2 5 9 3501TN_2 dPS526A TRIP PC-526A Trip Status (S/G 2 Stmline Press PT-526)___
PS/526C 120 VlAG IA Tricon 2 5 10 3501TN2 dPS526CTRIP PC-526C Trip Status (S/G 2 Stmline Press PT-526)PS/535A 120 VlAC IA Tricon 2 5 11 3501TN2 dPS536ATRIP PC-536A Trip Status (SIG 3 Stmline Press PT-536)__ PS/536C 120 VlAG IA Tricon 2 5 12 3501TN2 dPS536GTRIP PC-5360 TripStatus (SIG 3 Stmline Press PT-536)LS/518A 120 VAC IA Tricon 2 5 13 3501TN2 dLS518A TRIP LC-518ATnip Status (S/G 1 Level LT-518)LS/518B 120 VlAG IA Tricon 2 5 14 3501TN2 dLS518B TRIP LC-518B Trip Status (S/G 1 Level LT-518)LS/528A 120 VAC IA Tricon 2 5 15 3501TN2 dLS528A TRIP LC-528A Trip Status (SIG 2 Level LT-528) ___LS/528B 120 VAC IA Tricon 2 5 16 3501TN2 dLS528B_ TRIP LC-528B Trip Status (SIG 2 Level LT-528)LS/536A 120 VlAO IA Tricon 2 5 17 3501 TN2 dLS538A TRIP LC-538A Trip Status (SIG 3 Level LT-538)LS/538B 120 VAC IA Tricon 2 5 18 3501TN2 dLS5388 TRIP LC-538B Trip Status (S/G 3 Level LT-538)LS/548B 120 VAC IA Tricon 2 5 19 3501 TN2 dLS548BTRIP LC-548B Trip Status (SIG 4 Level LT-548)LS/461A 12_0 VlAO IA Tricon 2 5 20 3501TN2 dLS461ATRIP LC-461A Trip Status (PZR Level LT-461) -TS/43t1D 120 VAC II Tricon 3 5 1 3501E dTS431D DTRIP TC-431D Trip Status (DTTA Loop 3)TS/431H 120 VAC II Tricon 3 5... 2 3501E dTS431H TRIP TC-431H ripStatus (DTTA Lo~op.3)PS3NFAIL 17 120 VAC II Tricon 3 5 4 3501E dPS3N FAIL_17 ClasslIlAnalog Loop Power Supply PS3N Failure Relay PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 5 of 8 PROTECTION SET nlI DISCRETE INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG ___ ___________
TYPE _________PS5NFAtL 17 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 17 !Class II Analog Loop Power Supply PS5N Failure Relay PS2NFAIL 17 120 VAC II _ _ Tricon 3 __5 8_ __3501E dPS2N FAIL 17 Isolator Power Supply PS2N Failure Relay PS6N FAIL 17 120 VAC II ] Tricon 3 5 7 3501E dPS6N FAIL_17 Isolator Power Supply PS6N Failure Relay 120 VAC II Tricon 3 5 8 3501E .dTIM- SvN.i- 7 PPSII ....... * .......11 I12/2013 _____ _____ ___ _______ ______________________
PPS interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 6 of 8__________
__________ -I --CHASSIS SLOTI CH ICARD ITAGNAME (9)NNEL FUNCTION NNEL FUNCTION FM-416B I 4-20 mA 1 1 421 yFI416 A___vFI42B A FM-426B I 4-20 mA Reactor Coolant Flow Loop 1ito FI-416 (VB2) via FM-416B1 (Isolator)
Reactor Coolant Flow Loop 2 to FI-426 (VB2) via FM-426B_1 (Isolator)
......-...TE-430B I 4-20 mA IA Diverse-8 I3 421 vTE&#xa3;4310B TE-430A I 4-20 mA IA Diverse-A 8 4 421 vTE430A A 3 Thot-lA (to PS3 Trcon)3 Thot-2A (to PS3 Tricon)TE-431 A 4-20 mA IA Diverse-A A 8 vTE431A A TE-432A j 4-20 mA IA FM-436B 4-20 mA I IA I-A 8 yTE432AA DTTA Loop 3 Thot-3A (to PS3 Tricon)-I B 1 1 421 yFI436 B Reactor Coolant Flow Loop 3 to FI-436 (VB2) via FM-436B 1 (isolator)
FM-446B 4-20 mA IA Diverse-B B 11121421 yFI446_B Reactor Coolant Flow Loop 4 to FI-446 (VB2) via FM-446B 1 (Isolator)
DTTA Loop 3 Tcold-2 (to PS3 Tricon)TE-431B I 4-20 mA IA Diverse-B I B 8 3 I421 yTE431BB TE-430C 4-20 mA IA Diverse-B B -8 4 421 yTE430C B DTTA Loop 3 Thot-l B (to PS3 Tricon)TE-431C 4-20 mA IA Diverse-8 B B 5 421 yTE431C B DTTA Loop 3 Thot-2B (to PS3 Tricon)TE-432C 4-20 mA IA Diverse-B B B 6 421 yTE432C B DTTA Loop 3 Thot-3B (to PS3 Tricon)TM-431E 4-20OmA II Tricon 3 2 1 3805E yT1431A Delta-T to TI-431A VB2) &aTM431E (RN04A)TM-431F 4-20 mA II Tricon 3 2 2 3805E 1T14316 Overpower Setpoint to T/411A (CC1) & TI-431B (VB2)TM-431G 4-20 mA II Tricon 3 2 3 3805E yTI431C Overtemp Setpoint to T/411A (CC1) & TI-431C (VB2)TM-432F 4-20 mA II Tricon 3 _ 2 4 3805E yTI432 Tav9 to TI-432 (VB2) & aTM432F (RNO4A)..... ............ 
-A _ _1 he3 2 38 8 / ...........
4U 03~BI LM-461 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 03 (VB1)LT-461 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A PZR Level to LI-461 (VB2)PM-457 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Pressure to PZR Pressure Control (Control Set 1 , P1-457 (VB2)PT-935 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Containment Pressure to PI-935 (VB1) & ERFDS (V/B1)PT-403 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Loop 4 WR Press to PR--403 (VB2), RVLIS (PAM 4), ERFDS (VB2)________
PM--403A 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 4 WR Press to PI-403A (VB2), ERFDS (VB4)PT-526 Input 4-20 mA IBA,1 (7) N/A N/A N/A N/A N/A Loop 2 Steamline Pressure to PI-526 (VB3)__________________
PM-526 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamline Pressure to DFWCS PT-536 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A Loop 3 Steamline Pressure to PI-536 (VB3)PM-536_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamline Pressure to DFWCS LT-518 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 1 Level to LI-51B (VB3) & ERFDS (VB1)LM-518_1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 1 Level to DFWCS, AFW LT-52B Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 2 Level to LI-528 (VB63) & ERFDS (VB1)LM-528_1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 2 Level to DFWCS, AFW LM-528 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 2 Level to AMSAC LT-538 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 3 Level to LI-538 6V3) & ERFDS (VB1)LM-538 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 3 Level to DFWCS, AFW LT-548 Input 4-20 mA IB.A,1 (7) N/A N/A N/A N/A -N/A S/G 4 Level to LI-548 (VB83) & ERFOS (VB1)LM-548 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 4 Level to DFWCS, AFW FM-41 68_1 4-20 mA I ___I! Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 1 to FI-41 6 (VB2)FM-426B 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 2 to FI-426 (VB2)FM-436B 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 3 to FI-436 (VB2)FM-446B_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 to FI-446 ('162)11/12/2013
______[ -____ --___________________________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.3______________________________________Sheet 7 of 8 CHANNEL FUNCTION PPS Ill Chassis A Trouble PPS Ill Chassis A Failure PPS Ill Chassis A Channel in Bypass PPS Ill Chassis A Out of Service Loop 1 Low Flow Rx Trip (SSPS)Loop 2 Low Flow Rx Trip (SSPS)Loop 3 Low Flow Rx Trip (SSPS) _____Loop 4 Low Flow Rx Trip (SSPS)PZR Pressure Low Rx Trip (SSPS)Unblock SI, P1l (SSPS)PZR Pressure High Rx Trip (SSPS)PZRPressure Low-Low SI (SSPS) ___________
PZR Pressure High -PORV (RNASA)Ctmt Press High SI, Ph A lIsn (SSPS)Ctmt Press Hig!h-High Clint Spray,_ph B slin (SSPS)PPS Illia System Timebass Frame Rate Output PPS IlI Chassis B Troubte PPS Ill Chassis B Failure PPS Ill Chassis B Channel in Bypass PPS Ill Chassis B Out of Service Loop 1 Low Flow Rx Trip (SSPS)Loop 2 Low Flow Rx Trip (SSPS) _____Loop 3 Low Flow Rx Trip (SSPS)Loop 4 Low Flow Rx Trip (SSPS)PZR Pressure Low Rx Trip (SSPS)Unblock SI, P11 (SSPS)PZ.R Pressure High Rx Trip (SSPS)_________
PZR Pressure Low-Low SI (SSPS)PZR Pressure High -PORV (RNASA)Ctmt Press Hi.g~h SI, Ph A sIsn Ctmt Press High-High Ctmt Spray, Ph B sIsn (SSPS)PPS IllB System Timebase Frame Rate Output OPDT Rx Trip (SSPS)Low-Low P12 (SSPS)Loop 4 WR Pressure Low to RHR V-8702 Open Ckt (RNSIA)SIG 2 High-HIgh Level Turbine Trip, FW sIsn P14 (SSPS)S/C 3 Low-Low Level Rx Trip & AFW pump Start (SSPS) _.S/G 4 Low-Low Level Rx Trip & AFW Pump Start (SSPS)Loop 4 WNR Pressure High to LTOPS (RNASA)Loop 2 Low Stmeline Press SI & Stmeline sIin (SSPS)Loop 3 Stmeline Press High Negative Rate Stmeline sIsn (SSPS)S/G 1 High-High Level Turbine Trip, FW lIsn P14 (SSPS)OTDT Rx Trip (SSPS)Tavg Low Feedwater Isolation (SSPS) ______S/G 4 High-High Level Turbine Trip, FW slan P14 (SSPS)S/G 2 Low-Low Level Rx Trip & AFW Pump Start (SSPS)S/C 3 High-High Level Turbine Trip, FW/slan P14 (SSPSS ___Loop 4 WR Pressure High to RHR Not Isolated ALM 057 PKO216 Lootp 2 Stmeline Press Hiah Neaative Rate Streline slan (SSPSI L~opp3 Low Stmnline Press SI & Stinline Isjln SSPS)S/G 1 Low-Low Level Rx Trio & AFW Pumpr Start (SSPS'I PPS Interface Requirements Specification.
Rev 9 Appendix 4.3 Sheet 8 of 8 P'ROTECTION SET Iit DISCRETE OUTPUTS INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE __________TYPE_______
LC-461A IA 120 VAC Tricon 2 7 hio1 3601TN cLC461A PZR Level High Rx Trp (SSPS)LY-518H II 125 VDC Tricon 3 7 i1~ 3636T cALM1475 PPS Ill SIG Low-Low Level TTD Timer Actuated Alarm PK0605 UY-PS3A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1473 PPS Ill Trouble Alarm PK0604 UY-PS3B TRICON II 125 VDC Tricon 3 7 [3 3636T cALM1474 PPS III Channel in Bypass Alarm PK0602 UY-PS3C TRICON II 125 VDC Tricon 3 7 i 4 3636T cALM1472 PPS Ill Failure Alarm PK0601 TY-431 TRICON II 125 VDC Tricon 3 7 i5 3636T cALM1476 PPS III RTD Failure Alarm PK0603 OOSIII TRICON -__II 125 VDC Tricon 3 7 L 6 3636T cALM0738 PPS III Channel 00S Aiarm PK0607 PC-526B ____II 125 VDC Tricon 3 7 7 3636T cPC526B Loop 2 Steamline Pressure Low Alarm 0342 PK0902 PC-536B II 125 VDC Tricon 3 7_ 8 3636T cPC536B Loop 3 Steamline Pressure Low Alarm 0344 PK0903___________
__________ 
~~~3 7 14 3636T ______ ____________________
TC-4-31D II 120 VAC Trdcon 3 7 15 3636T cTC431D OTDT Interlock 03 (RNARA)TC-431H -II 120 VAC Tncon 3 7 -16 3636T cTC431H OPDT Interlock 0-4 (RNARA)11/12/2013
__________
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 1lof 7 P'ROTECTION SET IV ANALOG INPUTS INSTRUMENT fSIGNAL TYPE INST. CLASS CAL. RANGE EU CH CARD TAGNAME (5) JCHANNEL FUNCTION TAG TYPE TE-440B 200 OHM RTD IA 350 -650 0 F Diverse-A A 5 3 311 (w)aTE440B A DTTA Loop 4 Tcold-1 (for RTD conversion to mA)TE-440A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 4 311 (w)aTE440A A DTTA Loop 4 Thot-lA (for RTD conversion to mA)TE-441A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 5 311 (w)aTE441 AA DTTA Loop 4 Thot-2A (for RTD conversion to mA)TE-442A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A -5 6 311 (w)aTE442A A DTTA Loop 4 Thot-3A (for RTD conversion to mA)TE-454 (12) 200 OHM RTD IA 100 -700 &deg;F Diverse-A A -5 7 311 (w)aTE454_A PZR Vapor Temperature (for RTD conversion to mA)PT-474 4-20 mA (3) IA 1250 -2500 ps)g~ Diverse-A A -6 5 321 (w)aPT474_A PZR Pressure PT-934 4-20 mA (3) IA 55 psig Diverse-A A 6 6 321 (w)aPT934 A Containment Pressure TE-441 B 200 OHM RTD IA 350 -650 &deg;F Diverse-B B -5 3 311 (w)aTE441 BB DT TA Loop 4 Tcold-2 (for RTD conversion to mA)TE-440C 200 OHM RTD IA 350 -650 0 F Diverse-B B -5 4 311 (w)aTE440C B DTTA Loop 4 Thot-l B (for RTD conversion to mA)TE-441C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B -5 5 311 (w)aTE441C B DTTA Loop 4 Thot-2B (for RTD conversion to mA)TE--442C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 6 311 (w)aTE442C B DTTA Loop 4 Thot-3B (for RTD conversion to mA)PT-474 4-20 mA (3 IA 1250 -2500 psig Diverse-B B 6 5 321 (w)aPT474 B PZR Pressure PT-934 4-20 mA (3) IA 55 psig Diverse-B B 6 6 321 (w aPT934_B Containment Pressure NE-44A 0-10 VDC IA 0 -120 %Tricon 1 -2 1 3703EN (w aNE44A DTTA Loop 4 Upper (Neutron)
Flux NE-44B 0-10 VDC IA 0 -120 %Tricon 1 2 2 3703EN (w)aNE44B DTTA Loop 4 Lower (Neutron)
Flux Tricon 1 3 1 3721N Spare Tricon 1 3 2 3721N Spare TE-440B 4-20 mA (3) IA 510 -630 &deg;F Tnicon 1 3 3 3721N (w aTE4-40B DTTA Loop 4 Tcold-1 TE-440A 4-20 mA (3) IA 530 -650 &deg;F Trdcon 1 3 4 3721N (w aTE440A DTTA Loop 4 Thot-lA TE-441A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 -3 5 3721 N (w)aTE441A DTTA Loop 4 Thot-2A TE-442A 4-20 mA (3) IA 530 -650 &deg;F Tdicon 1 -3 6 3721 N (w)aTE442A DTTA Loop 4 Thot-3A PT-474 4-20 mA (3) IA 1250 -2500 psig Tricon 1 3 7 3721N (w)aPT474 DTTA Loop 4 PZR Pressure STricon 1 3 8 3721N Spare _____________
Tricon 1 3 9 3721N Spare PT-516 4-20 mA (3) IA 0 -1200 psig Tricon 1 3 10 3721N (w)aPT516 Loop 1 Steamline Pressure Tricon 1 3 11 3721N Spare LT-517 4-20 mA (3) IA 0 -100 %Tricon 1 3 12 3721N (w)aLT517 S/G 1 Level LT-537 4-20 mA (3) IA 0 -100 %Tricon 1 -3 13 3721N (w)aLT537 S/G03 Level PT-405A 4-20 mA (3) IA 0 -3000 psig Tricon 1 3 14 3721N (w)aPT405A Wide Range Pressure Loop 4 TE-454 4-20 mA (3) IA 100 -700 0 F Tricon 1 3 -15 3721 N (w)aTE454 PZR Vapor Temperature Tdicon 1 4 1 -3721N Spare______ _______Tdicon 1 4 2 3721N Spare TE--441 B 4-20 mA (3) IA 510 -630 0 F Tdicon 1 4 3 3721 N (w)aTE441 B DTTA Loop 4 Tcold-2 TE-440C 4-20 mA 3) IA 530 -650 0 F Trdcon 1 4 4 3721 N (w aTE440C DTTA Loop 4 Thot-1 B TE-441C 4-20OmA (3) IA 530 -650 &deg;F Tricon __1 4 5 3721N (w)aTE441C DTTA Loop 4Thot-2B TE-442C 4-20 mA (3) IA 530 -650 &deg;F Tdicon 1 4 6 3721 N (w)aTE442C DTTA Loop 4 Thot-3B Trdcon 1 4 7 3721N Spare_______Tricon 1 4 8 3721N Spare________Trcon 1 4 9 3721 N Spare PT-546 4-20 mA (3) IA 0 -1200 psig Trdcon 1 4 10 3721 N (w aPT546 Loop 4 Steamline Pressure_____ _Tricon __1 4 11 3721N Spare ____________________
LT-527 4-20 miA (3) IA 0 -100 %Tdicon 1 4 12 3721 N (w aLT527 S/G 2 Level LT-547 4-20 mA (3) IA 0 -100 %___ Tricon 1 4 -13 3721 N (w aLT547 S/G 4 Level PT-405 4-20 mA (3) IA 0- 3000 ps)j Tricon 1 4 14 3721N (w aPT405 Wide Range Pressure Loop 3 PM-474 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Pressure PM-405At 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Wide Range Pressure Loop 4 PM-516 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamline Pressure PM-546 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 2 of 7 PROTECTION SET IV ANALOG INPUTS INSTRUMENT -SIGNAL TYPE -INST. CLASS -CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG ____ ____ ____-__- _ TYPE- _ _ ____________
LM-517_1 20 mA -IA -NA NA Isolator N/A N/A {N/A N/A N/A SIGi1Level LM-517 2 20 mA -IA -NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-527 1 4-20 mA IA NA NA L Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-537 1 20 mA IA NA NA L Isolator N/A N/A jN/A N/A N/A S/G 3 Level LM-547 1 20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level 11/12/2013
_______ ______
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 3 of 7 PROTECTtON SET IV DISCRETE INPUTS ______ ____ _______ ______________________________
tNSTRUMENT iSIGNAL TYPE INST. CLASS PROCESSORI CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION S TAG j ___ TYPE ________PC-474A FB [SM A 48 VOC IA Diverse-A A 7 5 302 dPC474A LSMA PZR Press Low Rx Trip LSM A Feedback PC-4740 FB LSM A 48 VDC IA Diverse-A A 7 7 302 dPC474CLSMA PZR PressaHigh Rx" Trip LSM A Feedback PC474D FE LSM A j 48 VDC IA Diverse-A A 7 8 302 !dPC474D LSMA PZR Press Low-Low St LSM A Feedback PC-474BFB LSMA 48 VDC IA Diverse-A A 7 9 302+/- dPC474B LSMA -PZR Press High -PORV LSM A Feedback PC-934A FB [SM A 48 VDC IA Diverse-A A 7 10 302 ldPC934A [SMA Ctmt Press High (SI, Ph A Isin) [SM A Feedback PC-934B FB [SMA 48 VDC IA Diverse-A A 7 11 302! dPC934B [SMA Ctmt Press High-High (Ctmt Spray, Ph B Isin) [SM A Feedback PC-474A BypA 48 VDC IA Diverse-A_-
A 7 16 302 dPC474A BYPA PZR Press Low Rx Trip A Switch Status PC-4740 BypAl 48 VDC IA Diverse-A A 7 i18 302 dPC474C BYPA PZR Press High P-x Tdip Byp A Switch Status PC-474D BypA 48 VDC IA Diverse-A A 7 19 302 dPC474DBYPA PZR Press Low-Low SI BypA Switch Status PC-474B B vp A 48 VDC IA Diverse-A A 7t 20 302 dPC474B BYPA PZR Press Hig 0VBp A S~witch S tatus ..PC-934A Byp-A- 48 VDC IA Diverse-A A 7 21- 302 dPC934A BYPA Ctmt Press High (St, Ph A lIsn) Byp A Sw Status PC-934B 48 VDC IA Diverse-A A 7 i22 302 dPC9348 BYPA CttPesHghHgCmsSry hBlan) Byp A Sw Status PS3FAtL IVA 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IVA ALS-A Chassis Power Supply 1 Failure (+48VA)PS6FAIL IVA i 48 VOC IA Diverse-A A 7 i25 302 dPS6FAIL IVA ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAILIVA i 48 VDC IA Diverse-A A 7 J 26 302 dPS1FAIL IVA Anatog InputLoo Power Supl Failure ............
_PS4FAIL IVA 48 VDC IA Diverse-A A 7 f27 302 dPS4FAIL IVA Analog Input Loop Power Supply 2 Failure PS2FAIL IVA 48 VDC IA Diverse-A A 7 28 302 dPS2FAIL IVA ALS Contact Wetting Supply 1 Failure PS5FAIL IVA 48 VDC IA Diverse-A A 7 29 302 dPS5FAIL VMA ALS Contact Wetting SupSly 2 Failure PPS IV Alarm ClearA 1  48 VDC IA Diverse-A A 10 11 102 dALMCLR IVA PPS IV Alarmn Ctear A Switch Actuated pPS IV TAB status A 48 VDC IA Diverse-A A 10 2 102 dTABSTAT-IVA _PPS IV A TAB Enable Status _______PC-474A FB [SMBI: 48 VDC IA Diverse-B B 7] 5 -302 dPC474A LSMB PZR Press Low Rx Trip [SM B Feedback PC-474C FB [SM B 48 VDC IA Diverse-B B 7 7 302 -dPC474C LSMEB PZR Press High RxT L SM B Feedback _____PC474D FE [SM B 48 VDC IA Diverse-B B 7 i8 302 -dPC474D LSME PZR Press Low-Low SI [SM B Feedback PC-474B FE [SMB 48 VDC IA Diverse-B B 7 9 302 dPC474B LSMB PZR Press High -PORV [SM B Feedback PC-934A FE [SM B 48 VDC IA Diverse-B B 7 10 302 dPC934A [SME Ctmat PressHigh (SI, Ph A slan) [SM B Feedback PC-934B FE [SM B 48 VDC IA Diverse-B B 7 11 302 dPC934B [SMB Cltnt Press High-High (Clint Spray, Ph B slan) LSMB Feedback PC-474A B 48 VDC IA Diverse-B B 7 16 302 dPC474A BYPB PZR Press Low Rx Trip BypB Switch Status ___PC-4740 BypB 48 VDC IA Diverse-B B 7 18 302 dPC474C BYPB PZR Press High Rx Tdip BypB Switch Status P0-474D BypB 48 VDC IA Diverse-B B 7 19 302 dPC474D BYPB PZR Press Low-Low SI BypB Switch Status PC-474B B yp B 48 VDC IA Diverse-B B 7 20 302 LdPC474B BYPB PZR Press Hig OR y B Switch Status PC-934ABypB 48 VDC IA Diverse-B B 7 21 302 / dPC934A BYPB Ctmt Press High (SI, Ph A sIsn) BypB Sw Status PC-934B.BypB 48 VDC IA Diverse-B B 7 22 302 dPC934B BYPE Clint Press High-High (Ctmt Spray, Ph B Ilan) Byp B Sw Status PS3FAIL lVB 48 VDC IA Diverse-B B 7 24 302 idPS3FAI lVB ALS-A Chassis Power 1 Failure (+48VA) _____PS8FAIL. lVB 48 VDC IA Diverse-B B 7 j25 302 dPS6FAILIVB ALS-A Chassis Power Supply 2 Failure (+48VB)-PS1 FAIL lyE 48 VDC __IA Diverse-B B 7 26 302 dPS1 FAI.L/V ly nlo nut Loop oerup~piy 1 Failure _____PS4FAIL lyE 48 VDC IA Diverse-B B 7 J27 302 dPS4FAIL IVE Analog Input Loop Power Supply 2 Failure PS2FAlL lyVB 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL IVE ALS Contact Welting Supply 1 Failure PS5FAIL..tVE 
~48 VDC IA Diverse-B B 7 29 _ 302_- dPS5FAIL IVB ALS Contact Wettinsg=
Supp~ly 2 Failure PPS IV Alarm ClearBi 48 VDC IA Diverse-B l 10 1 102 dALMCLR IVE PPS IV Alarm Clear..B Switch Actuated PPS IV TAB Status B 48 VDC IA Diverse-B i B 10 2 102 dTABSTAT IVB PPS IVB TAB Enable Status[P4 DTTA OOS 24 VDC IA Tricon 2 2 1 3503EN2 dL4 DTTA 00S DTTA Loop 4 Oh. OOS Switch[P4 TT1D OOS 24 VDC IA Tdicon i 2 2 2 3503EN2 dL4" TTD "OOS TTD Loop 4 Oh. OOS Switch[.547 24 VOC IA Tricon l 2 2 3 3503EN2 dL547 OOS SIG 4 Level 006 Switch T454 OOS 24 VDC IA Tricon 1 _2 2 5 3503EN2 dT454 OOS PZR Vapor Temperature Oh. OOS Switch__ P405 OOS 24 VDC IA Tricon 2 2 J9 3503EN2 dP4050OOS Wide Ran ge Pressure Loop 3 Oh. 006 Switch P405A OOS 24 VDC IA Tricon __2 --2 J 10 3503EN2- dP405A OOS Wide Range Pressure Loop 4 Oh. OOS Switch P516 O)OS 24 VDC IA Tricon __2 2 12 3503EN2 dP516 -OOS Loop 1 Steamline Pressure Oh. OOS Switch P546 00S 24 VDC IA __ Tricon I 2 i15 3503EN2 dP546 006 Loop 4 Steamline Pressure Oh. 006 Switch[517 006 24 VDC IA Tricon i 2 2 16 3503EN2 d[517 OOS S/G 1 Level OOS Switch[527 006 24 VDC IA Tricon 2 2 17 3503EN2 d[527 006 S/G02 Level 006 Switch[537 006 24 VDC IA Tricon 2 2 ]18 3503EN2 dL537 006 S/G 3 Level 006 Switch ______PS26 FAIL 18 24 VDC IA Tdicon 2 2 -19 3503EN2 dPS2S FAIL,.18 Analog Loop (Input) Power Supply PS25 Failure Relay PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 4 of 7 PROTECTION SET IV DISCRETE INPUTS i INSTRUMENT I SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD I TAGNAME CHANNEL FUNCTION TAG j ____________
TYPE___ ___________________________________
PS7SFAIL 18 / 24 VDJC IA Tdicon 2 2 20 3503EN2 dPS7SFAIL 18 Analog Loop Input) Power SuppI PS7S Failure Relay PS35 FAIL 18 / 24 VDC IA Tdcon 2 2 21 3503EN2 dPS3S FAIL_18 Discrete Loop (Input) Power Supply PS3S Failure Relay PS6S FAIL 18 -24 VDC IA Tdcon ___2 2 22 3503EN2 dPS6S FAIL 18 Discrete Loo (nut)power~pl~yPS6S FailurepRly 24 VDC IA Tricon 2 ......2- '23 3503EN2 Spare.. .........________ 24 VDC IA Tricon_ 2 __ 2 24 3503EN2 Spare__24DIPWVR_18 24 VDC IA Tricon 2 2 25 3503EN2 d24DIPWR 18 Loss of Power t0 Digital input Card TS/441C___
120 VAC IA Trdcon 2 __ 5 1 3501TN2 dTS441C TRIP TC-441C Trip Status DTTA TS/441G 120 VAC IA Tricon 2 -,5 2 3501TN2 dTS441G TRIP TC-441G Trip Status (DTTA Loop 4)TS/442D 120 VAC IA Tricon 2 -2 5 3 3501TN2 dTS442D TRIP TC-442D Trip Status (DTT-IA Loop 4)TS/442G 120 VAC _ IA Tricon___
2 --5 4 3501 TN2 dTS442G TRIP TC-442G Trip Status (DTTA Loop 4).PC405A 120 VAC IA Tricon l 2 -5 5 3501TN2 dPC405ATRIP -PC-405A Trip Status (WR Pressure PT-405A)___LS/547A 120 VAC IA Tdicon__ 2 --5 6 3501TN2 dLS547A TRIP LC-547A TripStatus (S/GLevel LT-547)PC/405B 120 VAC IA -Tricon 2 -5 7 3501TN2 dPC405BTRIP PC-405B Trip Status (WR Pressure PT-405A)PC/405D 120 VAC IA Tricon ! 2 5 8 3501TN2 IdPC405D TRIP PC-405D Trip Status (WNR Pressure PT-405A)PS/516A 120 VAC IA Tricon 2 5 9 3501TN2T dPS516A TRIP PC-516A Tri S tatus.(Stmline Pressure PT-516)PS/516C 120 VAC IA Tricon I 2 5 10 3501TN2 dPS516C TRIP PC-516C Trip Status (Stmline Pressure PT-516)PS/546A 120 VAC IA Tricon 2 5 11 3501TN2 dPS546A TRIP PC-546A Trip Status (Stmline Pressure PT-546)PS/546C 120 VAC IA_ Tricon 2 5 12 3501TN2 dPS546C TRIP PC-546C TripSatsStmline Pressure PT-546)______
LS/517A 120 VAC -~IA Tricon 2_____ 5_____LS/517B 120 VAC _ _ IA Tricon 2 5 14 3501TN2 dLS517B TRIP LC-517B Trip Status SIG Level LT-517) ____LS/527A 120 VAC --IA -- Tricon __2 5 15 3501TN2 dLS527A TRIP LC-527A Trip Status (SIC Level LT-527)LS/527B 120 VAC IA Tricon __2 5 16 3501TN2 dLS527B TRIP LC-527B Tri Status (SIC Level LT-527)___LS/537A___
120 VAC _ IA Tricon __2 _ 5 3501TN2 dLS537A TRIP _LC-537A Trip Status (S/C Level LT-537)___
LS/5378 120 VAC IA Tricon __2 5 18 3501TN2 dLS537BTRIP LC-537B Trip Statush (S/C Level LT-537)LS/547B 120 VAC IA Tricon 2 5 sF 19 3501TN2 dLS547B TRIP LC-547B Trip Status (SIC Level LT-547)______________
120 VC II Trico 3 51 T44DTI C41 rpSau OT op4 TS/441D 120 VAC II Tricon __3 5 2 3501E dTS441H TRIP TC-441DHTrip Status (DTTA Loop 4) __PS3N4AIL18 120 VAC II Tricon 3 5 4 3501E dPS441 FAI 18 Class1HI nalg op Powersupl SNFilrea -PS3N FAIL 18 120 VAC 11 Tricon 3 5 5 3501E dPS3N FAIL 18 Class II Analog Loop Power Supply PS3N Failure Relay PS2N FAIL 18 120 VAC __II __ Tricon 3 5 6 3501E dPS5N FAIL 18 IslassItAaor oo Power Supply PS5N Failure Relay __PS2N FAIL 18 120 VAC II __ Tricon 3 5 16 3501E dPS2N FAIL 18 Isolator Power Supply PS2N Failure Relay T~=ot,.4 120 VAC II _ Tricon 3 5 ]8 3501E ,d'rM- YvC-,4, o 1,1122013
______ _______
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 PROTCTIO SETIV NALO OUTUTSSheet 5 of 7 INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION__ TAG __ _ _-TYPE TE-440B 4-20 mA IA Diverse-A A 8 3 421 yTE440B A DTTA L oop 4 Tcold-1 (PS4 Tricon)TE-440A 4-20 mA IA Diverse-A A 8 4 421 yTE44OA A DTTA Loop4 Thot-lA (PS4 Tdcon)TE-441A 4-20 mA IA Diverse-A A 8 5 421 yTE441A A DTTA Loop 4 Thot-2A (PS4 Tricon)TE-442A 4-20 mA IA Diverse-A A 8 6 421 yTE442A A DTTA Looo 4 Thot-3A (PS4 Tilcon)TE-454 4-20 mA IA Diverse-A A 8 7 421 yTE454 A PZR Vapor Temperature (PS4 Tricon)TE-441 B 4-20 mA IA Diverse-B B 8 3 421 yTE441 B B DTTA Loop 4 Tcold-2 PS4 Tricon)TE--440C 4-20 mA IA Diverse-B B 8 4 421 yTE440C B DTTA Loop 4 Thot-l B (PS4 Tricon)TE-441C 4-20 mA IA Diverse-B B 8 5 421 yTE441C B DTTA Loop 4 Thot-2B (PS4 Trdcon)TE--442C ___ 4-20 mA_ ___IA Diverse-_B
_B __8 __6 _421 ....... T442C B DTTA Loop 4 Thot-3B (PS4 Trdcon)TM-441E ___ 4-20 mA II__ Tricon 3 2 __1 3805E yTI441A Delta-T to TI-441A (VB2) & aTM4.41E (RN04A)TM-441F 4-20OmA II Tricon 3 2 2 3805E yTI441B Ove oer Setpointto T/411A (CC1 & TI-441B VB2)TM-441G 4-20OmA II Tricon 3 2 3 3805E yT1441C JOvertemp Setpoint to T/411A (CCl) &TI-441C (B2)TM-442F 4-20 mA II Tricon 3 2 _ 4 3805E jTavg to Tl-442 (VB2) & aTM442F (RN04A)TM-454A 4-20 mA lI,D,3 Tricon 3 2 5 3805E T'1/454 vs-por Tamp to TI-454 (VB2--PM-474 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A .PZR Pressure to PZR Pressure Control (Control Set 1_PT-516 Input 4-20 mA IBA,1 7 N/A -N/'A-N/A -N/A- N/A- Loo.....t.amine Pressure to P1-516 (VB-___ PM-5i6 1 4-20 mA _ II Isolator Out N/A N/A N/A N/A N/A Lo 1 Steamline Pressure to DFWCS PT-546 Input 4-20 mA IBA,1 7 N/A N/A N/A N/A N/A Loop 4 Steamline Pressure to P1-546 VB3)PM-546 1 4-20 mA II Isotator Out N/A N/A N/A N/A N/A Loop 4 Steamline Pressure to DFWCS___LT-517 Input __4-20 mA IB,A,1 ....... (7) N/A N/A N/A N/A N/A S/G 1 Level to LI-517 VB3), ERFDS (VB4)LM-517 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to DFWCS, AFW LM-517 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to AMSAC LT-527 Input ___ 4-20 mA IB,A,1 (7Z) N/A N/A N/A __N/A N/A S/G 2 Level to LI-527 (VB3), ERFDS (VB4)LM-527 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 2 Level to DFWCS, AFW___ LT-537 Input 4-20 mA IBA,1 _ (7) N/A _ N/A N/A N/A ___N/A S/G 3 evl to LI537 yB3),_ERFDS (VB4) __LM-537 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 3 Level to DFWCS, AFW LT-547 Input 4-20 mA IBAA1 7 N/A N/A N/A N/A N/A S/G 4 Level to LI-547 (VB3), ERFDS (VB4)___ LM-547 1 I 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to DFWCS, AFW___________
PT-934 Input 4-20 mA -IBA,1 j7) ~ N/A N/A N/A N/A N/A Containment Pressure to P1-934 (VB1)PT-405 Input 4-20 mA IBA,1 (7) N/A N/A N/A N/A N/A Loop 3 WR Press to PI-405 (VB2), ERFDS (VB4), RVLIS (PAM 3)PM-405A 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 4 WR Press to PI-405A (VB2), ERFOS __11/11/2013 PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 6 of 7 PROTECTION SET INSTRUMENTI IU PI A~r~flIYII 4 ~nn,.iNcL.
rUIN~,. I TAG VOLTAGE}TYPE UY-PS4A_DIV-A II 125 VDC Diverse-A A 2 1/2 402 cPS4A DIV A PPSIV Chassis ATrouble UY-PS4CDIV-A II 125 VDC Diverse-A A 2 3/4 402 cPS4C DIV A PPS IV Chassis A Failure__UY-PS4BDIV-A II 125 VDC Diverse-A A 2 5/6 4D2 cPS4B DIV A PPS IV Chassis A Channel in Bypass UY-PS4D DIV-A II __ 125 VDC Diverse-A A 2 7/8 402 cPS4D DIV A PPS IV Chassis A Out of Service PC-474A A IA 120 VAC Diverse-A A 9 5 402 cPC474A A PZR Pressure Low Rx Tnip (SSPS)PC-474C A IA 120 VAC Diverse-A A 9 7 402 cPC474C A PZR Pressure High R-x Tdip (SSPS)PC-474D A -__IA 120 VAC Diverse-A A 9 _8 40.2 .cPC474D_A PZR Pressure Low-Low SI (SSPS)PC.-474B A IA 120 VAC (11) Diverse-A A 9 9 402 cPC474B A PZR Pressure High -PORV (RNASA)PC-934A A IA 120 VAC Diverse-A A 9 10 402 cPC934A A Clint Press High SI, Ph A Isin (SSPS)PC-934BA ___IA ___ 48 VDC Diverse-A
__A __ 9 11 402 cPC934B A Clint Press H~igh-High Clint Spray, Ph B Ilan (SSPS)___LOOPPULSEA II 48 VDC Diverse-A A 10 1 102 cPULSE A PPS IV A System Timebase Frame Rate Output UY-PS4A DIV-B II 125 VDC Diverse-B B 2 1/2 402 cPS4A DIV B PPS IV Chassis B Trouble UY-PS4CDIV-B II 125 VDC Diverse-B B 2 3/4 402 cPS4C DIV B PPS IV Chassis B Failure UY-PS4BDIV-B j___II _ 125 VDC Diverse-B
_ B 2 5/6 402 cPS4B DIV B PPS IV Chassis B Channel in Byass __UY-PS4DDIV-B
___II 125 VDC Diverse-A A 2 7/8 402 cPS4D DIV B PPS IV Chassis B Out of Service PC-474A B IA 120 VAC Diverse-B B 9 5 402 cPC474A B PZR Pressure Low Rx Tdip (SSPS)PC-474CB IA 120 VAC Diverse-B
__B __ 9 7 402 cPC474C B PZR Pressure Hig~h Rx Trip (s~sps)PC-474D B 4 IA -120 VAC Diverse-B B 9 8 402 cPC474D B PZR Pressure Low-Low SI (SSPS)PC-474B B IA 120 VPC (11) Diverse-B B _ 9 9 402 cPC474BB _PZR Pressure High -PORV (RNASA) ___ _______PC-934A B IA 120 VAC Diverse-B B 9 10 402 cPC934A B Cltmt Press High SI, Ph A lain (SSPS)PC-934B B IA 48 VDC Diverse-B B 9 11 402 cPC934B B Clint Press High-High Clint Spray, Ph B slan (SSPS)LOOPPULSEB II __ 48 VDC Diverse-B B 10 1 102 cPULSEB PPS IV B System Timebase Frame Rate Out~put________________
_______ Tricon ___TC-454A deleted (internal point only)TC-441G IA 120 VAC Tricon____2 6 1 3601TN cTC441G OPDT Rx Tdp (SSPS) __TC-442D IA 120 VAC Tricon 2 6 2 3601TN cTC442D Tavg Low-Low P12 (SSPS)PC--405A IA___ 120 VAC Trdcon 2 6 3 3601TN _ cPC405A _Loop 4 WR Pressure Low to RHR V-8701 Open Ckt (RNSIB)LC-527A IA 120 VAC Tricon 2 6 4 3601TN cLC527A S/G 2 High-High Level Turbine Trip, FW sIsn P14 (SSPS)LC-537B IA 120 VAC Tdicon 2 6 5 3601TN cLC537B S/G 3 Low-Low Level Rx Trip & AFW Pump Start (SSPS)LC-547B IA 120 VAC Tricon __2 6 6 3601TN cLC547B S/G 4_Low-Low Level Rx Trip & AFW Pump Start (SSPS)PC-405D IA 120 VAC Tricon __2 6 7 3601TN cPC4O5D Loop 4 WR Pressure High to LTOPS (RNASA)PC-516A____
IA_____ 120 VAC Tdicon __2 6 8 3601TN cPC516A Loop 1 Low Stmline Press SI & Stmline lain (SSPS)PC-546C IA_ 120 VAC Tricon __2 6 9 3601TN cPC546C Loop 4 Stmline PressHigh Negtie Rate Stmline Ilan (SSPS)LC-517A____
____A__ 120 VAC Tdicon __2 8 10 3601TN cLC517A S/G 1 High-High Level Turbine Trip, FW lIsn P14 (SSPS)TC-441C___
IA___ _ 120 VAC Tdicon 2 7 1 3601TN cTC441C OTDT Rx Trip (SSPS)TC-442G____
IA_____ 120 VAC Tricon 2 7 2 3601TN cTC442G Tavg Low Feedwater Isolation (SSPS)LC-547A IA 120 VAC L Tricon 2 7 3 3601TN cLC547A S/G 41-igh-High Level Turbine Trip, FW lIsn P14 (SSPS)LC-527B___
IA120 VAC Tricon 2 __ 7 4 3601TN cLC527B S/G 2 Low-Low Level Rx Trip & AFW Pump Start (SSPS)LC-37AIA120 VAC Tricon 2 __ 7 5 3601TN cLC537A S/G 3 High-High Level Turbine Trip, FW lIsn P14 (SSPS)___IA 120 VAC Tricon_ 2 7 6 3601TN cPC405B Looo 4 WR Pressure Hligh to RHR Nol Isolated Alarm CktI (RNSIB)PC-516C IA 120 VAC / Tricon 2 7 7 3601TN cPC516C Loop 1 Stmnline Press High Negalive Rate Stmline Ilan (SSPS)PC-546A IA 120 VAC Tricon 2 7 8 3601TN cPC546A Loop 4 Low Stmline Press SI & Stmline lIin (SSPS)LC-517B IA __ 120 VAC Tricon 2 7 9 3601TN cLC517B S/Cl1 Low-Low Level Rx Trip& AFW Pump Start (SSPS) __Spare IA 120 VAC Tdicon 2 7 10 3601TN Spare LY-517H II __ 125 VDC Tricon 3 7 1 3636T cALM1480 PPS IV S/C Low-Low Level TTD Timer Actuated Alarm (MAS) PK0605 UY-PS4ATRICON II 125 VDC Tricon __3 7 2 3636T cALM1478 PPS IV Trouble Alarm (MAS) PK0604 UY-PS4B TRICON II 125 VDC I Tdicon 3 7 3 3636T cALM1479 PPS IV Channel in Bypass Alarm (MAS PK0602_________
UY-PS4CTRICON II 125 VDC Tricon 3 7 4 3636T cALM1477 PPS IV Failure Alarm (MAS) PK0601 TY-441 TRICON II __ 125 VDC Tricon 3 7 5 3636T cALM1481 PPS IV RTD Failure Alarm (MAS) PK0603 00S IV TRICON ___II __ 125 VDC Tricon 3_ 7[ 6 3636T cALM0739 PPS IV Channel OOS Alarm (MAS) PK0607 PC'516B II __ 125 VDC iTricon 3j7 7 3636T cPC516B Loop 1 Steamline Pressure Low Alarm (MAS) 0245 PK0901 PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 7 of 7 PROTECTION SET tV DISCRETE OUTPUTS INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG _______ VOLTAGE ________ __ TYPE ______ ________________
PC-5468 II 125 VDC Tricon 3 7 8 3636T cPC546B Loop 4 Steamline Pressure Low Alarm (MAS) 0325 PK0904-TC-441D II 120 VAC Tricon 3 7 15 3636T cTC441D OTDT Interlock C3 (RNARA)TC-441H II 120 VAC Tricon 3 7 16 3636T cTC441H OPDT Intertock C4 (RNARA)11/1212013
________ _______________________
_________________________________ 
--V The CD in Attachment 5 of the Enclosure Contains Proprietary Information Withhold from public disclosure under 10 CFR 2.390 Enclosure Attachment 2 PG&E Letter DCL-16-011I Interface Requirements Specification, Revision 9 The CD in Attachment 5 of the Enclosure Contains Proprietary Information Withhold from public disclosure under 10 CFR 2.390 When separated from the CD in Attachment 5 to the Enclosure, this document is decontrolled 

This page left blank by intent Process Protection System Interface Requirements Specification Revision:
9 Page 3 of 78 REVISION HISTORY Revision Affected Reason for Revision Number Pages 1All Initial Issue 1.4.4.8 Added STP 1-33 1.4.5.4 ALS Topical Report is Rev 1 1.5.2 Revised Tricon PLC description 1.5.3.1 Deleted STB and COM boards -not used 1.5.3.2 Clarified ASU capability 1.5.3.3 Added section and new Figure 1-1 to clarify ALS A and ALS B connections to SSPS 1.5.5 Revised section to clarify signal characteristics and open RTD detection 1.5.5.6 Revised TCM communications description 1.5.7 Added PPS Gateway Computer Scope and CC4 system health HMI unit 1.5.8 Added Response Time Allocation Clarified PRXM and RRXM chasses notation Figure 1-2 Reassigned safety-related OOS switches to safety-related PRXM Chassis 2 through Replaced Class 2 PS Failure contact inputs to Class 2 RRXM with safety-Figure 1-21 related + 24 Vdc PS output to safety-related PRXM chassis Removed FW flows from Class 2 RRXM Appendix 3.1 (I/O General revision List)2.1.1 Clarified ALS input loop power supply , Clarified PTC Thermistor terminology 2.1.2 Deleted reference to Fig 2-2 through Fig 2-4 2.3.3 Added new section -one-way communications link from ALS to Maintenance Workstation.
Renumbered remaining sections.2.3.6.3 Protocol is Ethernet based Appendix 3.1 General revision (All sheets) Clarified "Safety-Related" and "Non-Safety-Related" items Entire Document Changed MVDU to Maintenance Workstation 1.3.1 Added Electrical Class 1E definition, clarified instrument class definitions 1.4.4.9, 1.4.5.5, Added references 1.4.5.6, 1.4.5.7 1.5.7 Clarified port aggregator tap description and scope 1.5.8 ALS response time is 150 ms for temperature channels per ALS comment Figue 11 Added Ioopback from trip switch load side; port aggregator tap is PG&E scope;through 3 Figure 1-21 Figure 1-14, Figure 1-19 corrected typos in descriptions Figure 1-22 Updated figure. per ALS topical report.2.! 'larifed /lO-power-supply requirements and-scope 
--Figure 2-2 Clarified TE-413A and TE-423 for illustration only 2.3 2.7.1 Updated communications Figure 2-1________ Fiure2-3 Added new figures per ALS coordination meeting 05/17-18/2011 Process Protection System Interface Requirements Specification Revision:
9 Page 4 of 78 Reviion Affeted Reason for Revision Number Pages 1.5.3.3 Figure ~11 Updated per ALS design documentation 1.5.7 Updated isolation per ALS design documentation 1.5.8 Updated response time per ALS documentation Figure 1-2 Figure 1-3 Figure 1-7 Figure 1-8 Figure 1-12 Updated figures to illustrate ALS Line Sense Modules and external Trip Switches Figure 1-13 Figure 1-17 Figure 1-18 Figure 1-6 Figure 1-16 Updated figures to include Class II power supply failure discrete inputs Figure 1-21 Figure 1-22 Corrected class break 2.1.2 Clarified Triconex Al cards~Figure 2-1 Figur 2-2 Reformatted 2.1.4 Added LSM description Figure 2 4 Figur 2 5 Added figures 2.7.2.3 Updated per ALS design documentation Gloalr(not Deleted proprietary information designations 1.4.3.4 Added reference 1.4.4.4 Deleted reference to SCM -not relevant to this document 1.5.5 Revised section title for clarity 1.5.6 Clarified:
Maintenance Workstation is not used to configure the Tricon Discussed TAB connection to ALS 1.5.7 Editorial Figure 1-2 through Updated and replaced Figure 1-22 52.1 Moved Figures to end of Section.2.2 Updated 2.1.1 Revised Item 5 and 6 -Power supply output voltage will be determined in the detailed design.Moved item 4 from 2.1.2 to Item 4 in this section and renumbered.
_____________Updated Item 7 2.1.2 _ Updated Editorial corrections Removed unused items -not requirements Figure 2-2_______ Figure 2-3 Updated per Triconex Field Termination Guide Process Protection System Interface Requirements Specification Revision:
9 Page 5 of 78 Reviion Affeted Reason for" Revision Number Pages 2.3 Updated section per vendor hardware descriptions 2.3.1 I/O power supply locations determined by detailed design 5, cont. 2.3.2.1 Editorial corrections 2.3.6 Updated description -There are two TCM cards in the Tricon Main Chassis.2.3.6.1 Updated communications 1.1 Removed "... Later.."discussion 
-Later items resolved at this revision 1.3.2 Updated acronym list 1.5.4 Updated Isolation device description Figure 1-1 Updated Title Fgrs1-52, 1-3 Updated Prot Set I instrument tags and power supplies Figures 1-7, 1-8, Updated Prot Set II instrument tags and power supplies 1-10, 1-11 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _6 Figures 1-12,1-13, 1-15, 1-16 Updated Prot Set Ill instrument tags and power supplies Figures 1-17,1-18,1-20, 1-2 Updated Prot Set IV instrument tags and power supplies Deleted descriptive sections; information not needed here -contained in other 2.7.1 documents.
Updated section title Vendor CS Innovations 2.7.2 Deleted descriptive sections; information not needed here -contained in other documents 2.8 Added new alarm interface requirements section 1.3.2 Added HMI, KVM to Acronyms Table 1.4.5.6 Corrected document number 1.4.5.8 Added DCPP ALS System Design Specification 6116-00011 1.4.5 1.4.5.9 Added ALS Platform Specification 6002-(00011 1.4.5.10 Added DCPP ALS-ASU Communications Protocol 1.5.3.3 Revised last sentence; trip switches may be used to generate a partial channel trip independently of the ALS logic 1.5.6 Split MWS into two units; one each for Tricon and ALS 1.5.6 Added KVM switch, KVM 7 Figure 1-2 1. Change BYP/OOS Alarm to BYP Alarm Figure 1-7 2. Updated ALS power supply tagnames and descriptions Figure 1-12 3. Added RCS flow isolators (except Prot Set IV)Figure 1-17 4. Updated ALS TxBI and TxB2 interfaces
: 1. Change BYP/OOS Alarm to BYP Alarm Figure 1-3 2. Updated ALS power supply tagnames and descriptions Figure 1-8 3. Added RCS Flow isolators (except Prot Set IV)Figure 1-13 4. Added ALS Maintenance Workstation (Cont. sheet)Figure 1-18 5. Added KVM Switch, HMI peripherals (Cont. Sheet)6. Updated ALS TxBI and TxB2 interfaces PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 6 of 78 Revision J Affected I Reason for Revision Number Pages ______________________
Figure 1-5 Figure 1-10 Figure 1-15 Figure 1-20 Changed "Manual Trip Switch" to "Trip Status" Corrected directional arrows between from PRXM to RRXM (Figure 1-20 only)1. Added TC454B alarm DO (Set IV Only)Figur 1-6 2. Delete "PCS" from TM-454A analog output (Set IV Only)3. Changed BYP/OOS alarm to BYP alarm (New OOS alarm below)Figre -11 4. Added "PPS Set x Channel Out of Service Alarm" DO to MAS Figre -16 5. Added "PPS Set x Time Synch" Dl Figre -21 6. Remove ALS data links to MWS; clarified MWS is Tricon 7. Added KVM Switch, HMI peripherals Fiue1-22 Split MWS into two units; one each for Tricon and ALS. Added KVM switch, 2.1.1.3 Deleted manufacturer reference (Moore) -implementation detail 2.1.1.6.j 20 ohm isolator input is estimated 2.1.1.6 Deleted "adjustable" Added "input" 2.1.1.7.a Add "24 Vdc"; deleted sharing of Tricon analog input and output power supplies 2.1..7.c Analog output power supply cannot be shared with discrete signals per Tricon 2.1..7.cvl10 qualification 2.1.4 Added new figure to illustrate LSM functions Figure 2-1 Renumbered remaining figures Updated ALS analog input ioop power supply designation; clarified 24 Vdc Figure 2-2 (was Changed ALS-321 from internal current shunt mode to external current shunt Figure 2-1) (voltage) mode Added example Rs calculation for information only Changed ALS-321 from internal current shunt mode to external current shunt Figure 2-4 (voltage) mode Figure 2-32wa Updated Tricon analog input loop power supply designation; clarified 40 Vdc Revised to reflect separate ALS and Tricon MWS computers and disconnection 2.3 of the TAB when the ASU is not in use.2.7.1 Added KVM switch description 2.7.2 Added ALS TxB and TAB protocol references Figure 2-6 (was Updated to show SSPS and RNASA ETT DO Power Supply voltage TBD by Figure 2-5) detailed design Figure 2-7 Added New figure to illustrate TAB communication cable connections 2.8.3.2.2)
Added reference to FRS New Section -Application constraints and requirements:
2.9.1 Tagname length restriction 2.9.2 Modbus aliases 2.9 2.9.3_Tagina~me convention 2.9.4 Disallowed function block names 2.9.5 Quality Codes______________2.9.6 Online Maintenance and Test Interface 7, cont.Appendix 3.1 Reformatted Split Tricon OOS/Bypass MAS output into individual OOS and Bypass DO Corrected tagnames and engineering units various sheets Added new points and Tricon quality check for Gateway Computer all sets Corrected ALS Power Supply failure alarm descriptions PSII and PS Ill Revised cells are shown in red text Separated into individual appendices for each Protection Set Process Protection System Interface Requirements Specification Revision:
9 Page 7 of 78 Reviion Affeted Reason for Revision Number Pages Figures 1-4, 1-5, 1-6, 1-9, 1-10, 1-11, 1-14, 1-15, Added Tricon Chassis numbers 1-16, 1-19, 1-20, 1-21, ________________________________
Figurs 1-, 1- Added Class Il ERFDS Pressurizer Level analog outputs for constructability 11, 1-16 Figres1-6 1- Added HMI peripherals controlled by KVM Switch 11, 1-16, 1-21 Figure 1-22 Added Tricon MWS unmanaged Ethernet Switch 2.1.1 .6.j Clarified ERFDS input impedance Figure 2-6 Clarification 2.3.1 and 2.3.2 Clarified Tricon Class II communications hardware Deleted ALS TAB enable switch; TAB cable must be physically connected to 2.3.4 enable TAB 2.3.7 Clarified KVM Switch requirements 2.7.1 Added Tricon MWS unmanaged Ethernet Switch 2.7.2 Clarified ALS MWS TAB communication requirements 82.8.2 Clarified PPS Trouble Alarm requirements 2.8.3 Editorial change 2.8.5 Clarified RTD Failure alarm requirements 2.8.6 Clarified TTD Timer Actuated alarm requirements 2.9.5.2 Editorial 2.9.6.6.3 Clarify Tricon Test in Bypass/Test in Trip Sequence 2.9.6.6.4 Clarified "bistable outputs" vs. 'channel outputs" per ICM comment 2.9.6.6.5 Moved section from 2.9.6.6.4.c per 1CM comment 2.9.6.6.5.1 Added FRS reference 2.9.6.6.6 Added FRS reference for Tricon bypass switch 2.9.6.7.8 2.9..7.9 Clarified ALS external Trip and Bypass switches Added read-only aliased memory tagname requirements for intermediate 2.9.7 variables.
Appendix 3.1
* Revised Tricon I/O hardware assignments for constructability Appendix 3.2
* Added PPC variable names for information only Appendix 3.3
* Revised analog input and analog output loop impedances
______ Appendix 3.4
* Revised cells are identified in red text PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 8 of 78 Revision J Affected 1 Reason for Revisi6n Number Pages ___________________________
This Table, all revs Reformated; changes not highlighted This Table, Updated Appendix 3.1 entry: Added "Split Tricon 00S/Bypass MAS output into Rev 7 individual OOS and Bypass DO" Various Revised document outline for consistency
* Changed CS Innovations to Westinghouse per Westinghouse comments 1.2 08/28/2013
* Added "SSPS" to connected systems* Editorial change* Added definitions of "shall," "should," 'will," and "may" 1.3.1
* Added definitions (Bypass, Test in Trip, Test in Bypass, Out of Service)* Added definition of "defeat" 1.3.2 Corrected ALS acronyms (ASU); deleted unused acronyms* Added SDOE 1.4.3.1 Reinstated Reg Guide 1.75 per SAPN 50583555 1.4.3.5 Added Reg Guide 1.152 Rev 3 1.4.5.5 Changed CS Innovations to Westinghouse per Westinghouse comments 1.4.5.6 08/28/2013 1.4.5.11 Added NEI-08-09 1.5.1 Deleted reference to Figure 1-1; not relevant; editorial changes 1.5.2 Editorial change 1.5.3 Changed CS Innovations to Westinghouse per Westinghouse comments_____________
08/28/2013 1.5.3.1 Updated ALS board descriptions 1.5.3.2 Updated ASU description 1.5.3.3 Editorial change Figure 1-1 Updated power supply voltages 1.5.4 Added "Westinghouse;" separated requirements 1.5.4.3 Deleted isolation device range; not relevant 1.5.4.4 Added "shall" 1.5.5 Updated per Westinghouse comments 08/28/2013 1.5.5.2 Added RCS Flow scaling 1.5.5.3 Updated RTD signal processing 1.5.5.4 Added RTD output ranges to Tricon 1.5.5.4.3 Moved Tricon temperature input mx+b filter requirement from 15.3.3.2 to here.1.5.5.5 Clarified OOR Low 1.5.5.6 Clarified downscale fail Clarified ALS qualified board input range. Split requirements and moved to 1.5.5.7preceding sections.1.5.5.9 Clarification 1.5.5.10 Added requirement for analog output signals to fail low on detection of critical failure.1.5.6 Separated requirements; editorial changes 1.5.7 Separated requirements; clarified ALS-1 02 CLB Separated requirements 1.5.8 Changed milliseconds to seconds;______________Editorial changes* Changed ALS "Containment High-High Channel in Test" alarm output to ALS Figures 1-2, "Out of Service" DO; Deleted "Alarm" and "MAS" from other system-level DO 1-3
* Updated ALS power supply tagnames and descriptions to agree with SDS___________
6116-00011 RevI1 Figure 1-5 Added loss of input power to Dl card 9 Figure 1-6* Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input Process Protection System Interface Requirements Specification Revision:
9 Page.9 of 78 Revision 1 Affected [Reason for Revision Number I Pages Revision Affected Reason for Revision Number Pages Figures 1-7, 1-8* Changed ALS "Containment High-High Channel in Test" alarm output to ALS"Out of Service" DO; Deleted "Alarm" and "MAS" from other system-level DO* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 9, cont Figure 1-10 Added loss of input power to Dl card Figur 1-11 Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input* Changed ALS 'Containment High-High Channel in Test" alarm output to ALS Figures 1-12, "Out of Service" DO; Deleted 'Alarm" and "MAS" from other system-level DO 1-13
* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 Figure 1-15 Added loss of input power to Dl card Figue 116 Deleted PZR level output to ERFDS* Deleted Tricon Time Synch discrete input o Added Workstation/ASU to Al output Figures 1-17,
* Changed ALS 'Containment High-High Channel in Test" alarm output to ALS 1-18 'Out of Service" DO; Deleted 'Alarm" and "MAS" from other system-level DO* Updated ALS power supply tagnames and descriptions to agree with SDS 6116-00011 Revi1 Figure 1-20 Added loss of input power to Dl card* Deleted Tricon TC-454B PZR Vapor Space Temperature Alarm from project Figure 1-21 scope; TM-454A analog signal goes to MCR and PCS* Deleted Tricon Time Synch discrete input Deleted note regarding unused KVM switch ports -consistency with LAR Figur 1-22 Supplement (Rev 1); no design impact 2.1, Updated I/O List reference to Appendices 3.1 through 3.4 (now Appendices 4.1 Various through 4.4)2.1.1 Updated power supply descriptions; editorial changes 2.1.1.1 -2.1.1.7 Miscellaneous clarifications and editorial changes 2.1.1.5 Deleted 2.1.1.7.h Clarified ALS 'A" and 'B" series input resistance is 200 ohms (Rs= 100 ohms)2.1.1 .7.i Clarified Tricon input resistance when powered from FTP vs. externally powered* Clarified isolator input resistance is 100 ohms 2.1. 7j Removed reference to I/O List Deleted duplicate requirement to power Tricon analog and discrete inputs from 2.1.1.8.cdifferent sources. Also d uplicates info in VI0 Tricon Topical Report 2.1.2 2.1.3 Miscellaneous clarifications and editorial chang'es 2.1.4 2.1.2.5 Deleted 3721 -not used Figure 2-1 Corrected feedback signal to ALS-302-A Dl Figur 2-2 General Revision Figure 2-3 Figur 2-4
* Added"'FOR INFORMATION ONLY"* General Revision Figur 2-5 Relocated LSM downstream of manual bypass switch-* Added Byoass switch nole to MAS* Added "FOR INFORMATION ONLY"* General Revision Figure 2-6
* Added Bypass switch pole to MAS* Added "FOR INFORMATION ONLY" 2.2 Clarifications and editorial changes 2.3.1 2.3.2 Editorial changes 2.3.3 (was 2.3.6) Moved 2.3.6 to 2.3.3 and renumbered following sections.2.3.4 (was 2.3.3)* Expanded TxB2 description per Westinghouse comments 08/28/2013
* Editorial chanoes -
PRoesisiPotectinfSytem Interface Rquerementsopecificatio Revision:
9 Page 10 of 78 Revision Affected [Reason for Revision Number Pages ________________________
2.3.4.4 (was 2.3.3.4)Updated information to be transmitted by TxB2 9, cont.2.3.4.5 Added requirement for identical TxB1 and TxB2 data streams 2.3.5 (was 2.3.4)Edtrachne 2.3.6 (was 2.3.5)Edtrachne 2.3.6 (was 2.3.6) Moved 2.3.6 to 2.3.3 2.3.6.4 Added requirement for identical TxB1 and TxB2 data streams 2.3.7 Editorial changes and clarifications 2.3.7.1 KVM switch is PG&E scope; clarified "shall' vs. "will" 2.4 2.4.2 Clarifications per Westinghouse comments 08/28/2013 2.4.3 2.6.1.1 Deleted drawing reference; subject to detailed design 2.7.1.1 2.7.1.2 Clarifications per Westinghouse comments 08/28/2013 2.7.1.3 2.7.2 Separated requirements
*Expanded ASU function description per Westinghouse comments 08/28/2013 2.7.2.4 Clarifications; also changed 'instrument channel" to "channel" 2.7.2.9 Added requirement to to modify adjustable parameters 2.7.2.10 Parameters may be changed only via TAB with TAB connected 2.7.2.11 Expanded functions to support surveillance testing 2.7.2.12 Added requirement for ASU software to run under MSWindows OS 2.7.2.13 Added requirement for printing capability 2.8.1 Clarifications per Westinghouse comments 08/28/2013
* Numbered section to facilitate tracking 2.8.1.1
* Added requirement to suppress power supply failure alarms if DI card has lost power.2.8.2 Clarifications per Westinghouse comments 08/28/2013 2.8.2.3 -Added requirement for Tricon Dl card power supply failure* Added requirement to suppress Tricon power supply failure alarms if Dl card 2.8.2.4has lost power.2.8.3
* Clarifications per Westinghouse comments 08/28/2013
* Changed "instrument channel" to "channel" various places Rewrote sections:* Clarified ALS channel in bypass is not an alarm; it is a discrete output to be wired per the detailed design.* Clarified Bypass contacts activate if a channel is bypassed from the ASU or 2.8.3.1 -the manual bypass switch 2.8.3.4 -Added LSM current sense requirements
* Added conditions to defeat RTD failure alarm input* Clarified ALS Channel in Bypass clears if no other signals in ALS chassis require it to be active______________
Deleted 2.8.3.4 ____________________
2.8.4 Clarifications per Westinghouse comments 08/28/2013 2.8.4.2 Added ALS Chassis 00S alarm.2.8.6 Deleted Tricon TTD Energize to Trip requirement 
-Refer to FRS.3.2.1 1.5 2.8.7 Added alarm time delay per PG&E request 2.8.7.3 -Added new item 11, Loss of power to Dl card alarm 2.9.1 Deleted Tricon Tagname length requirements; to be incorporated by Invensys______________
into Tricon Coding Guidelines document 2.9.2 Deleted Tricon Modbus alias requirements; to be incorporated by Invensys into Tricon Codina Guidelines document PRoesisiPotectinfSytem Interface Rquirementsopecificatio Revision:
9 Page 11 of 78 Revision [Affected 1 Reason for Revision Number [Pages __________________________
2.9.3.1 Deleted Tricon Tagname requirements; to be incorporated by Invensys into Tricon Codina Guidelines document 9, cont.2.9.3.2 Clarifications per Westinghouse comments 2.9.4 Deleted Tricon disallowed function block Names* Deleted Table 2 2.9.5 Removed Table 4, Tricon quality code 5 requirements; to be incorporated by 2.9.5Invensys into Tricon Coding Guidelines document 2.9..1 Editorial change* Numbered to facilitate tracking 2.9.5.2 Added new items 2-6 per PG&E comment.2.9.6 various Changed "instrument channel" to "channel" Clarified removal of a channel from service shall not affect ability of other 2.9.6.5 channels in the same chassis that have not been removed from service to initiate a safety function 2.9.6.6 (various)
Editorial change (Manual switches)2.9.6.6.3.c.(3).(c)
Deleted Tricon bistable test requirement from project scope 2.9.6.6.3.c.(3).(d)
Deletion requested by PG&E 2.9.6.6.3.g Changed "an instrument channel bistable" to "a bistable" 2.9.6.6.3.h 2.9.6.6.3.h(1)
* Changed "an instrument channel bistable" to "a bistable" 2.9.6.6.3.h(2)
* Clarified P-13 bypass logic 2.9.6.6.3.h(3) 2.9.66.3.
* Changed "an instrument channel bistable" to "a bistable"* Clarified logic 2.9 .6 .6.34 2.9.6.6.3.k Added/clarified alarm suppression requirements 2.9.6.6.3.1 2.9.6.6.7 Added Tricon MAS outputs testability requirements 2.9.6.7 Expanded description per Westinghouse comments 08/28/2013 2.9.6.7.10 2.9.6.7.12 Deleted 2.9.6.7.13 2.9.6.7.11 Added suppression criteria 2.9.6.7.14 2.9.6.7.15 Added requirements 2.9.6.7.16
* Updated maintenance tagnames per PG&E request 2.9.7
* Updated Tricon alarm time delay requirements
* Changed '""Bistable Comparators" to "Comparators" 3.0 Added new Section PPS Cyber Security Requirements 3.1* Added SDOE requirement;
* Clarified RG 1.152 Rev 3 applies to safety-related software only 3.2 Clarified scope 3.2.2 Clarified access enforcement and allowed actions 3.2.3 Clarified system use notification 3.2.4 [Clarified password requirements 3.2.5 [Clarified system hardening 3.2.6 [Clarified automatic login on MWS startup 4.0 4.0 Renumbered I/O List appendices and all references to them.
Process Protection System Interface Requirements Specification Revision:
9 Page 12 of 78 Reviion Affeted Reason for Revision Number Pages* Added Triconex wetting supply failure DI requested by PG&E e Deleted Triconex Time Synchronization discrete input all sets* Rearranged Tricon wide range RCS temperature inputs for constructability (Sets 1, II only)* Updated PPS Ill Tricon Channel OOS Alarm PK0607* Updated Tricon Set Ill Dl wetting voltages Appedix .1 Deleted Tricon TC-454B PZR Vapor Space Temperature (Set IV only)Appendix 4.2
* Deleted output supervision for energize to actuate ALS PORV discrete Appendix 4.3 Appendix 4.4 outputs* Revised ALS power supply tagnames and descriptions for 9, cont. (was constructability and to agree with SDS 6116-00011 Rev I Appendix 3.1
* Upgraded RCS flow analog output to Class IA (Sets 1, 11, 1I)Appendix 3.2
* Moved Loop 4 WR Pressure High to RHR Not Isolated (Sets Ill, IV Appendix 3.3 Only) from RRXM Ch 3 to RRXM Ch 2 Appendix 3.4)
* Updated reference drawings* Deleted ALS Containment Pressure Channel in Test alarm; replaced with PPS Out of Service (OOS) Alarm* Deleted Gateway tagnames per PG&E requestRevised cells are identified by font color and date.* Deleted Notes 4, 6, and 8* Changes are color coded red Process Protection System Revision:
9 Interface Requirements Specification Page 13 of 78 Contents 1 INTRODUCTION..........................................................................................................
15 1.1 PURPOSE.........................................................................................................................15 1.2 SCOPE ...........................................................................................................................
15 1.3 DEFINITIONSANDACRONYMS 
...................................................................................................
15 1.4 REFERENCED DOCUMENTS.....................................................................................................
18 1.5 IDENTIFICATION..................................................................................................................
19 2 INTERFACE REQUIREMENTS.........................................................................................
50 2.1 PROCESS INTERFACE REQUIREMENTS.........................................................................................
50 2.2 SAFETY-RELATED ALS/TRICON INTERFACE REQUIREMENTS.................................................................59 2.3 DATA COMMUNICATION INTERFACE REQUIREMENTS..........................................................................
59 2.4 SYSTEM POWER SUPPLY .......................................................................................................
61 2.5 INSTRUMENT POWER SUPPLY LOCATIONS 
....................................................................................
62 2.6 SYSTEM POWER SOURCES PROVIDED BY PG&E .......................................................................
62 2.7 WORKSTATIONS.................................................................................................................
62 2.8 ALARM INTERFACE REQUIREMENTS............................................................................
i................63 2.9 SOFTWARE CONSTRAINTS AND REQUIREMENTS 
..............................................................................
67 3 PPS CYBERSECURITY 
................................................................................................
74 3.1 SECURE DEVELOPMENT AND OPERATING ENVIRONMENT 
....................................................................
74 3.2 TECHNICAL CONTROLS...................... 
....................................................................................
74 4 APPENDICES 
............................................................................................................
78 4.1 PROTECTION SET I/O LIST ..........................................
'..........................................................
78 4.2 PROTECTION SET II I/O LIST ...................................................................................................
78 4.3 PROTECTION SET Ill I/O LIST ..................................................................................................
78 4.4 PROTECTION SET IV I/O LIST... ..................................................................................................
78 TABLES Table 1 TagnameConvention 
..............................................................................................
68 Table 2 Deleted..............................................................................................................
68 Table 3 Quality Code Assignment 
.........................................................................................
69 Table 4 Deleted..............................................................................................................
69 Process Protection System Revision:
9 Interface Requirements Specification Page 14 of 78 Figures Figure 1-1 ALS Diversity Architecture Concept .......................... 
.....................................
21 Figure 1-2 Repl1acement PPS Architecture 
-Set I AL S-A................................................................
25 Figure 1-3 Repl1acement PPS Architecture 
-Set IALS-B and Isolation Devices.......................................
26 Figure 1-4 Repl1acement PPS Architecture 
-Set I aft-Related Tricon Main Chassis...............................
28 Figure 1-5 Repl1acement PPS Architecture 
-Set ISafety-Related Tricon Primary RXM Chassis.....................
29 Figure 1-6 Rep3lacement PPS Architecture 
-Set INon-Safety-Related Tricon Remote RXM Chassis...............
30 Figure 1-7 Replacement PPS Architecture 
-Set IIALS-A ...............................................................
31 Figure 1-8 Repl1acement PPS Architecture 
-Set IIALS-B and Isolation Devices ......................................
32 Figure 1-9 Replacement P.PS Architecture 
-Set II Safety-Related Tricon Main Chassis..............................
34 Figure 1-10 Replacement PPS Architecture 
-Set II Safety-Related Tricon Primary RXM Chassis....................
35 Figure 1-11 Replacement PPS Architecture 
-Set II Non-Safety-Related Tricon Chassis...............................
36 Figure 1-12 Repl1acement PPS Architecture 
-Set Ill ALS-A ..............................................................
37 Figure 1-13 Repl1acement PPS Architecture 
-Set Ill ALS-B and Isolation Devices .....................................
38 Figure 1-14 Repl1acement PPS Architecture 
-Set Ill Safety-Related Tricon Main Chassis .............................
40 Figure 1-15 Repl[acement PPS Architecture 
-Set Ill Safety-Related Tricon Primary RXM Chassis ...................
41 Figure 1-16 Rep)lacement PP5 Architecture 
-Set Ill Non-Safety-Related Tricon Chassis..............................
42 Figure 1-17 Rep)lacement PPS Architecture 
-Set IV ALS-A ..............................................................
43 Figure 1-18 Rep3lacement PPS Architecture 
-Set IV ALS-B and Isolation Devices .....................................
44 Figure 1-19 Rep)lacement PPS Architecture 
-Set IV Safety-Related Tricon Main Chassis.............................
46 Figure 1-20 Rep)lacement PPS Architecture 
-Set IV Safety-Related Tricon Primary RXM Chassis ...................
47 Figure 1-21 Rep)lacement 225 Architecture 
-Set IV Non-Safety-Related Tricon Chassis .............................
48 Figure 1-22 Replacement 225 Non-Safety-Related Communications Architecture 
.....................................
49 Figure 2-1 LSM Functions 
............................................-.......................................................
53 Figure 2-2 Typical ALS Analog Input Wiring ..........................
i.....................................................
54 Figure 2-3 Typical Tricon Analog Input Wiring.............................................................................
55 Figure 2-4 Tricon/ALS PT-455 Interface Wiring ...........................................................................
56 Figure 2-5 ALS-A and ALS-B 5525 Connections (Deenergize to Trip Configuration).................................
57 Figure 2-6 ALS-A and ALS-B SSPS Connections (Energize to Trip Configuration)....................................
58 Figure 2-7 Typical TAB Communication Link Connection 
................................................................ 
: 66.
Process Protection System Interface Requirements Specification Revision:
9 Page 15 of 78.1 Introduction 1.1 1.2 1.3 1.3.1 Purpose This document specifies the requirements imposed on the Process Protection System (PPS), its subsystems, and other system components to achieve interfaces among these entities that are required for the PPS to perform its design function.This document is intended to be revised as the PPS replacement design progresses.
Scope The PPS comprises Tricon equipment provided by Invensys/Triconex and Advanced Logic System (ALS) equipment provided by Westinghouse, LLC. This Interface Requirement Specification (IRS) provides: 
(1) requirements for the interfaces between external field devices such as process transmitters and the Tricon and the ALS; (2) electrical and communication interfaces between the Tricon and ALS and their associated peripheral devices; and (3) other interfacing Diablo Canyon Power Plant (DCPP) systems such as the Solid State Protection System (SSPS), Plant Process Computer (PPC), Main Annunciator System (MAS), Safety Parameter Display System (SPDS) and the Safety-Related 120 Vac and 125 Vdc Power Systems.All external interface requirements for each of these systems will be defined.Definitions and Acronyms Definitions The following definitions are used in this document: TERM DEFINITION Channel An arrangement of components, modules, and software as required to generate a single protective action signal when required by a generating station condition.
A channel loses its_________________identity where single action signals are combined.Defeat Place a channel or function in an as-is condition.
Electrical Class 1E Design Class I electrical systems, components and equipment[1.4.4.9]
perform safety-related functions.
Instrument Class IA and lB Category 1 devices below are considered to serve Class 1 E functions.
All other instrument classes are considered to serve non-Class 1 E functions.
Instrument Class IA Instrument Class IA instruments and controls are those that[1 .4.4.6] initiate and maintain safe shutdown of the reactor, mitigate the consequences of an accident, or prevent exceeding 10 CFR____ ___ ____ ___ 100 [1.4.5.2]
off-site dose limits.Instrument Class lB Instrument Class lB instruments and c~ontrols are those th~at[1.4.4.6] -are required for post-accident monitoring of Category 1 and 2 variables in accordance with Regulatory Guide 1.97, Revision 3 [1.4.3.2].
Instrument Class IC Instrument Class IC instruments and controls have the[1.4.4.6]
passive function of maintaining the pressure boundary integrity of PG&E Design Class I piping systems.Instrument Class ID Instrument Class ID instruments and controls are components
[1:4.4.6]
that have certain Design Class I attributes, but do not require conformance with all Class IA, IB, or IC requirements.
Process Protection System Interface Requirements Specification Revision:
9 Page 16 of 78 TERM DEFINITION. 
.... .Instrument Class II Instrument Class II components are Design Class II devices[1.4.4.6]
with non-safety-related functions.
However, certain Class II components are subjected to some graded quality assurance requirements.
May A termh used to denote permission to perform activities and is neither a requirement nor a recommendation.
Out of Service An intentional inoperable condition established for a protection channel that prevents an unexpected interaction with other plant systems during maintenance activities.
For protection system channels that include comparator outputs, the OOS condition is established when a comparator output from the PPS instrumentation is forced to a fixed state by plant personnel via the MWS.For the purpose of this definition, manual trip and manual bypass switches are external components and are not considered part of the PPS instrumentation.
Partial Trip A condition where the SSPS input relay is in the tripped/actuated state.*For a Deenergize to Trip system output, the input relay state is False (0)* For an Energize to Trip system output, the input relay state is True (1)Protection Set The physical grouping of process channels with the same channel designation.
Each of the four redundant protection sets is provided with a separate and independent power feed and process instrumentation transmitters.
Thus, each of the four redundant protection sets is physically and electrically
_________________independent from the other sets.Shall A term used to denote a legally binding (i.e., contractual)
_________________
requirement.
Should A term used to denote recommendations that are desirable, but not contractual requirements.
Test in Bypass A maintenance condition in which the system output is maintained in the non-actuated condition.
* For a Deenergize to Trip system output, the output is maintained in a True (1) state* For an Energize to Trip system output, the output is_________________
maintained in a False (0) state Test in Trip A maintenance condition in which the system output is maintained in the actuated condition.
* For a Dee~nergi~z to Trip svs~tem output, the. output is maintained in a False (0) state a For an Energize to Trip system output, the output is______________
I maintained in a True (1) state Will A term used to denote intention or certainty; not a legally_________________binding (i.e., not contractual) requirement.
Process Protection System Interface Requirements Specification Revision:
9 Page 17 of 78 1.3.2 Acronyms ACRONYM DEFINITION ALS Advanced Logic System AMSAC ATWS Mitigation System Actuation Circuitry ASU ALS Service Unit ATWS Anticipated Transient Without Scram CDD Conceptual Design Document CLB Core Logic Board COM Communications Board DCM Design Criteria Memorandum DDE Dynamic Data Exchange DCPP Diablo Canyon Power Plant DFWCS Digital Feedwater Control System FRS Functional Requirements Specification HMI Human Machine Interface I&C Instrumentation and Controls IEEE Institute of Electrical and Electronic Engineers I/O Input/Output Deleted Deleted IRS Interface Requirements Specification KVM Keyboard, Video display, and Mouse HMI peripheral devices LLC Limited Liability Corporation MAS Main Annunciator System MCR Main Control Room NOEL Nuclear Qualified Equipment List NR Narrow Range NRC (USNRC) (United States) Nuclear Regulatory Commission Deleted Deleted OPDT Overpower Delta T OTDT Overtemperature Delta T PG&E (PGE) Pacific Gas & Electric Company PCS Process Control System PLC Programmable Logic Controller I I l -lI I11. I ILUbOOO I..JUI ljU 1.I PPS Process Protection System PRXM Primary Remote Expansion Module Deleted Deleted RCS Reactor Cooling System RNARA Auxiliary Relay Rack A RNASA Auxiliary Safeguards Rack A Process Protection System Interface Requirements Specification Revision:
9 Page 18 of 78 ACRONYM " DEFINITION 
: RNPxy PPS Racks X = 1-4 (Protection Sets I -IV)Y =A, B, C, D, E (Protection Sets I, II)Y= A, B, C (Protection Sets Ill, IV)RNSIA/RNSIB SSPS Input Relay Cabinet Train A/Train B RRXM Remote RXM RTD Resistance Temperature Detector RXM Remote Expansion Module RVLIS Reactor Vessel Level Indication System SCM Software Configuration Management SDOE Secure Development and Operating Environment SPDS Safety Parameter Display System SRS Software Requirements Specification SSPS Solid State.Protection System STB (ALS) Service and Test Board TOM Triconex Communication Module TMR Triple Modular Redundant TSAP TriStation 1131 Application Project WR Wide Range 1.4 Referenced Documents 1.4.1 General References and Standards The following codes, standards, and regulations referenced in this Section are totally or partially applicable to the activities covered by this Specification:
1.4.2 Institute of Electrical and Electronics Engineers (IEEE)1.4.2.1 IEEE Standard 279-1971, "Criteria for Protection Systems for Nuclear Power Generating Stations" 1.4.2.2 IEEE Standard 603-1991, "LEEE Standard Criteria for SafetySystems for Nuclear Power Generating Stations" 1.4.3 United States Nuclear Regulatory Commission (USNRC) Regulatory Guides 1.4.3.1 Regulatory Guide 1.75, Rev. 2, "Physical Independence of Electric Systems" 1.4.3.2 Regulatory Guide 1.97, Rev. 3, "Instrumentation for Light-Water-Cooled Nudiear P~wer Plants to Assess Piant and Environs Conditions During and -Following an Accident" 1.4.3.3 Regulatory Guide 1.180, Rev. 1, 'Guidelines for Evaluating Electromagnetic and Radio-Frequency Interference in Safety-Related Instrumentation and Control Systems" 1.4.3.4 U.S. Nuclear Regulatory Commission, Digital Instrumentation and Controls, Revision 1, "DI&C-ISG-04, Task Working Group #-4: Highly-Integrated Control Rooms -Communications Issues (HICRc)," March 6, 2009 (ADAMS Accession No.ML08331 0185)
Process Protection System Revision:
9 Interface Requirements Specification Page 19 of 78 1.4.3.5 Regulatory Guide 1.152, Rev 3, Criteria for Use of Computers in Safety Systems of Nuclear Power Plants 1.4.4 Implementing Documents 1.4.4.1 Process Protection System Replacement Conceptual Design Document (CDD)1.4.4.2 Process Protection System Replacement Functional Requirements Specification (FRS)1.4.4.3 Process Protection System Replacement System Software Requirements Specification (SRS)1.4.4.4 Deleted 1.4.4.5 DCM S-38A, Plant Protection System 1.4.4.6 DCM T-24, DCPP Instrumentation and Controls 1.4.4.7 DCM S-65, 120 VAC System 1.4.4.8 STP 1-33, Reactor Trip Time Test Program 1.4.4.9 DCM T-19, Electrical Separation and Isolation 1.4.5 Other References 1.4.5.1 Triconex Corporation Nuclear Qualified Equipment List (NQEL), latest version 1.4.5.2 Title 10 Code of Federal Regulations Part 100, Reactor Site Criteria 1.4.5.3 Letter No. NRC-V1 0-09-01, J. Polcyn (Invensys) to NRC, "Nuclear Safety-Related Qualification of the Tricon TMR Programmable Logic Controller (PLC) -Update to Qualification Summary Report Submittal and "Application for withholding Proprietary Information from Public Disclosure," dated September 9, 2009 1.4.5.4 Diablo Canyon Power Plant, Unit Nos. 1 and 2 -Safety Evaluation for Topical.Report, "Process Protection System Replacement Diversity 
& Defense-In-Depth Assessment" (TAC Nos. ME4094 and ME4095), dated April 19, 2011 (ADAMS Accession No. ML110480845) 1.4.5.5 6002-00301, ALS Topical Report and Supporting Documents Submittal, July 29, 2010 (ADAMS Accession No. ML102160471) 1.4.5.6 6002-32102, ALS 321 Design Specification 1.4.5.7 9700052-019, Field Terminations Guide for Tricon v9-1 0 Systems 1.4.5.8 6116-00011, DCPP ALS System Design Specification 1.4.5.9 6116-00100, ALS-ASU Communications Protocol 1-.4.5.10 600)2-00011, ALS Platform specification 1.4.5.11 NEI-08-09, Cyber Security Plan for Nuclear Power Reactors, Rev 6 1.5 Identification This section identifies the systems, interfacing entities, and other interfaces to which this document applies.
Process Protection System Revision:
9 Interface Requirements Specification Page 20 of 78 1.5.1 Protection Sets The PPS consists of sixteen (16) racks (per DCPP Unit) of instrumentation located in the Cable Spreading Rooms (Auxiliary Building, elevation 128). The sixteen racks are divided into four Protection Sets; five racks each for Protection Sets I and II, three racks each for Protection Sets ill and IV. Each Protection Set is physically separated and electrically isolated from the other sets.Protection Set I consists of Racks 1 thru 5 (RNP1A, RNP1B, RNP1C, RNP1D, and RNP1E).
Set II consists of Racks 6 thru 10 (RNP2A, RNP2B, RNP2C, RNP2D, and RNP2E).Protection Set III consists of Racks 11 thru 13 (RNP3A, RNP3B, and RNP3C).Protection Set IV consists ofRacks 14 thru 16 (RNP4A, RNP4B, and RNP4C).Physical equipment will be assigned to specific PPS racks during detailed design.The existing Eagle 21 HMI units are located in Racks 5 (RNP1E), 9 (RNP2D), 12 (RNP3B) and 14 (RNP4A). These racks are expected to house the replacement PPS Maintenance Workstation and communications equipment.
1.5.2 Triconex Tricon Programmable Logic Controllers (PLC)The Tricon PLC shown in the following figures is composed of the Main Chassis and two Remote Expansion Chassis (RXMs), all within a given protection set. The Main Chassis is connected to a "Primary" RXM via triplicated copper I/O expansion bus cables. The Primary RXM (PRXM) is connected to a "Remote" RXM chassis using multimode fiber-optic cables. The Remote RXM (RRXM) chassis allows extending the I/O bus over longer distances than copper cables can support, and to provide electrical isolation for non-safety-related I/O signals, as required.Refer to the Triconex licensing Topical Report [1.4.5.3]
for additional information.
1.5.3 Westinghouse Advanced LogicSystem (ALS)1.5.3.1 A typical ALS rack configuration as shown in the following figures contains two sets of the following components (See Reference 1.4.5.5 for additional details): ALS-1 02 -Core Logic Board (CLB)ALS-302 -Digital Input Board ALS-31 1 -Analog Input Board (Temperature)
ALS-321 -Analog Input Board ALS-402 -Digital Output Board ALS-421 -Analog Output Board 1.5.3.2 ALS Service Unit (ASU)Th ASU is a dedicatedsoftware application that is-installed on tlhe-ALS Maintenance Workstation (MWS) described in Section 1.5.6 and shown in Figure 1-22. The ASU application is connected to the ALS during maintenance or testing by plant personnel.
The ASU application provides non-intrusive diagnostic tools that allow plant personnel to access detailed status and configuration information of the system while the system is online.The ASU application also provides post-event analysis information about the system to plant personnel for evaluation of an event after it has occurred.The ASU application may be used to modify setpoints and tuning constants, but shall not be capable of altering functional programming (i.e., alter the Process Protection System Interface Requirements Specification Revision:
9 Page 21 of 78 algorithm) of the CLB.1.5.3.3 The ALS A and ALS B Conceptual architecture, which provides built-in diversity and defense in depth per the D3 evaluation approved by NRC[1.4.5.4], is illustrated in Figure 1-1. Wiring details are illustrated In Figure 2-5 and Figure 2-6.The manual bypass switches in Figure 1-1 allow one ALS diversity Group (i.e., ALS-A or ALS-B) to be bypassed and removed from service without tripping the channel. The manual trip switch may be used to initiate a partial channel trip independently of the ALS logic.Figure 1-1 ALS Diversity Architecture Concept De-energize to Trip Configuration Energize to Trip Configuration Note: Manual Trip switch as required by detailed design 1.5.4 Isolation Devices 1.5.4.1 The isolation devices shown in Figure 1-3, Figure 1-8, Figure 1-13, and Figure1-18are safety-related components providedby Westinghouse...
1.5.4.2 The isolation devices are separate and independent from both the Tricon and the ALS.1.5.4.3 All isolation devices are 4-20 mA DC input and 4-20 mA DC output.1.5.4.4 The qualified isolation devices shall perform the required isolation function when powered from non-safety-related I/O power. That is, credible faults (short circuit, open circuit, application of fault potential) on the Class II terminals will not adversely affect the Class I circuit.
Process Protection System Revision:
9 Interface Requirements Specification Page 22 of 78 1.5.5 ALS Signal Conditioning 1.5.5.1 The ALS shall provide signal conditioning and isolation for the Reactor Coolant System (RCS) non-safety-related flow analog output signals 1.5.5.2 The ALS shall provide capability to normalize the RCS Flow scaling periodically by adjusting the gain and offset (i.e., mex+b) from within the ALS application via the ASU.1.5.5.3 The ALS shall provide signal conditioning for the RCS narrow range Resistance Temperature Detector (RTD) safety-related signals to the Overpower Delta Temperature (OPDT) and Overtemperature Delta T (OTDT) reactor trip functions, and the RCS Wide Range Temperature and Pressurizer Vapor Space Temperature RTD signals.1. The ALS shall convert the RTD signals from resistance to temperature.
: 2. The ALS shall provide the capability to update the resistance to temperature conversion coefficients (i.e., a, b, and c) periodically.
: 3. Analog temperature signal input range information is provided in the following FRS Sections: a) 3.2.3.9 (WR Hot Leg and Cold Leg Temperatures), b) 3.2.5.9 (Tavg, AT, OPDT Setpoint, OTDT Setpoint), and c) 3.2.8.9 (PZR Vapor Temp).1.5.5.4 Temperatures shall be transmitted from the ALS to the Tricon via safety-related 4-20 mA analog signals scaled as follows: 1. Narrow Range Tcold: 510 -630 deg F [FRS 3.2.5.9.1]
: 2. Narrow Range Thot: 530- 650 deg F [FRS 3.2.5.9.1]
: 3. Wide Range Thot: 0 to 700 0 F [FRS 3.2.3.9.3.a]
: 4. Wide Range Tcold: 0 to 700 0 F [FRS 3.2.9.3.b]
: 5. Pressurizer Vapor Temperature:
100 to 700 0 F [ERS 3.2.8.9.3.a]
: 6. The Tricon shall provide an mx+b filter on the 4-20 mA input signals per FRS 3.2.1.14.3.
1.5.5.5 If the actual temperature is below the low scale output value defined in Section 1.5.5.4 the ALS shall output the low scale value, or 0% of span=4.00 mA without initiating an Out of Range Low alarm.1.5.5.6 The ALS shall provide down-scale open RTD protection; that is, if the ALS detects an open or shorted RTD, it shall output a 0.0 mA analog signal.1.5.5.7 All temperatures shall be transmitted from the ALS to the Gateway computer via RS-422 signals scaled for the qualified range of the RTD input board.1_5.5_8. This-aiiows the-Tricon to-provide RTD-faiiure aiarming-and-ensures that the , Tricon does not indicate RTD failure when the temperature is below low scale but still functioning correctly, a condition that exists during plant shutdown 1'.5.5.9 In the latter case, the actual temperature is available from the ALS via the Gateway computer via the TxB1 data stream.1.5.5.10 Analog output signals shall fail low, if possible, upon detection of critical failure.
Process Protection System Revision:
9 Interface Requirements Specification Page 23 of 78 1.5.6 Maintenance Workstation 1.5.6.1 Separate and independent Maintenance Workstation computers 
[Section 2.7]shown in Figure 1-22 are provided for the Tricon and ALS subsystems, respectively, for each Protection Set to allow PPS informatiOn processing and display. The two MWS computers in each Protection Set share common HMI peripheral devices such as the keyboard, video display, mouse (KVM), and touchscreen interface through a KVM switch [Section 2.3.7].1.5.6.2 The Tricon will be isolated from its dedicated Maintenance Workstation computer by the qualified safety-related Triconex Communications Module (TOM). Fiber optic cable electrically isolates the Tricon from external non-safety-related devices.1.5.6.3 The ALS broadcasts data to its dedicated Maintenance Workstation computer via the isolated one-way TxB2 RS-422 data links. TAB communications between the ALS and the MWS takes place via RS-485 data link. The TAB is physically disconnected from the MWS when the TAB is not in use. The TAB is connected and enabled only when maintenance is being performed on the ALS. It is disconnected at all other times. The TAB is enabled for short periods only when ALS maintenance is being performed, and maintenance will be performed under administrative controls by qualified individuals.
This arrangement satisfies NRC DI&C ISG-04, Staff Position 10 of Section 1, Interdivisional Communications 
[1.4.3.4].
1.5.6.4 A Maintenance' Workstation computer may access data only within its own protection set subsystem (i.e., Tricon or ALS). Communication with other protection sets or between subsystems within a Protection Set shall not be possible.1.5.7 Plant Process Computer Gateway and Other Non-,Safety-Related Communications Interfaces 1.5.7.1 The safety-related Tricon and ALS are connected to the non-safety-related PPC and workstation via the Gateway computer shown in Figure 1-22. The Gateway computer will be installed by PG&E in the Process Control `system (PCS) replacement project. The ALS-1 02 CLB provides isolation for the TxB1 and TxB2 one-way EIA-422 communication links to the PPC Gateway and the Maintenance Workstation, respectively.
The ALS transmits data to the non-safety-related Gateway computer, which is common to all four protection sets, and to the Maintenance Workstation using serial, unidirectional, one-way communications channels that do not require any handshaking.
1.5.7.2 The Tricon will be isolated from the Gateway computer by a data isolation device such as the port aggregator network tap shown in Figure 1-22, which permits two-way communications between the Maintenance Workstation belonging to a specific protection set and the Tricon in that protection set, yetvy ev n I--U- L V %.c4L.VVay I IjJULL .:I I IE port aggregator tap will be provided by PG&E.1.5.7.3 For system health displays, the PPS will share a HMI unit in the Control Room on CC4 that will also be installed by the Process Control System (PCS) replacement project.1.5.8 Response Time The reactor trip response time is the time interval from when the monitored parameter exceeds its trip setpoint at the channel sensor, until loss of control rod Process Protection System Revision:
9 Interface Requirements Specification Page 24 of 78 stationary gripper coil voltage. The ESF response time is the time interval from when the monitored parameter exceeds its trip setpoint until the ESF equipment is capable of performing its safety function.
The PPS is allocated a maximum response time of 0.409 seconds [1 .4.4.8].1.5.8.1 The ALS performs signal conditioning for the narrow range RTD's that support the Overtemperature AT (OTOT) and Overpower AT (OPDT) reactor trips, and the Tricon performs setpoint calculation and comparison and trip output. Therefore, the PPS time response allocation is shared between the ALS and Tricon portions of the PPS for these functions.
1.5.8.2 The preliminary worst case (deterministic)
OTDT and OPDT PPS response time allocations shall be as follows: ALS: "0.175 seconds for RTD processing Tricon: 0.200 seconds Contingency:
0.034 seconds Total PPS Allocation:
0.409 seconds 1.5.8.3 The vendor shall provide means of verifying the actual response time if the system does not support deterministic methods of calculating worst case response time characteristics.
1.5.9 Accuracy The FRS specifies existing Eagle 21 accuracy requirements with the intent to maintain currently licensed Channel Statistical Allowance (CSA) margins such that no setpoint changes are required.
Accuracy allocation between the ALS and Tricon for the RCS temperature parameters will be determined during the detailed design.
Process Protection System Interface Requirements Specification Revision:
9 Page 25 of 78 Figure 1-2 Replacement PPS Architecture 
-Set I ALS-A PPS Protection Set I RS-4,53 TAB Data Link Discnnected when not in ua AIl 'W~orstotion/ASUJ 03-422 Data Link TXBI TX Only PP3 Gateway RS-422 Data Link TX32 I TX Only 82= Wor-station till it (SZ FT..424 (33) PFT434 (54) P1-444 TE-4IOB TS-410A Loapt 303 Flaw (4-20 mA)Loop 2 R03 Flaw (4-20 twA) -=tony 3 ROD Flow Loop 4 ROD Plow (4-20 erA) 1 Loop)1 DTA Tc~ld-t (220o -)Leapt O TitA Tnt-IA (2(203)Loop I DITA Thot-Ok TE-412A Loop 1 hot-3A (22O 3).... LooplIWR Temptlot Leg ALS-A.......(2003Q)TE-413B Loop 1 WRTetnp Celd Log PZR ProssunePT-455(42mA FC-4t4.A LoopI Low Flow RxTrip (Disoreta) r FD0B424A Loop 2 Low Plow Sn Tri FC-434 A Loap 3 Law Plow Rnx Trip (Olanrete)
PFD44_A Laop 4LoW Flow RxTrip (Discrete)
TE-413A L~oop I Hat Leg Temp (4-20 mA)*TB-4t3B LOop)t Cold Leg Temp (4-2o mA)TE-410B Loop)t DT'A Tnald-I (4-20 mA)TB-410A Leapt1 DTCA"rnet-tA 
, (4-20 mA)TE-4IIA Loop I DSPA Thnt-2A (4-20 mA) 1 TE-412A Lonp I DTTA ThoI-O3A (4-20 twA)PC-4B3AA PZR Pressune Sigh Bo Trip (Dienrete)
P0-455B AtUnblook SI, P11i (Discrter)
P0-4553_A PZ3 Pressura Low RXt Trip (Diacnete) p0-4550_A P0R Presaune Low-Low StI (Diacnete) l p0-9378_A Cent Prss Highr-Hgh Clint Dpray. PB B Ilan (Diacretn)
P0-433E A P03 Pressura H-gh -PORVe (Discrare)
FM-414B So Contant Flow Loop I (4-20 mA)*PM-424B RooCoolant FlowLoop 2 (4-20 erA)SePS SSPS 3SPS BSPS PS I Trioon PSI Tdcooo PS I Td Poon PSI Trisn PS) Trbcon BPS Tin SOPS 3BPS BPSP IDOL IDO ()6) PT-SB7 FO-414 FBLSMA FO-424FB LSMA FC-434FBLSM A (4-20 mA)PC -,14 Lone I Low Pln LSMA (Discrete)
PF-424 Loop 2 Low Plow LSMA .(Discrete)
FC-434 Loop 3 Low PRn 131A (Dsacrete)
FC-444 Loop4 Low PlowLS3M4A
--_ -_o.,_ (Discrete) 
-P0-4510 P0.3 Pressura High LSM A P0-4SSPBLDMA(Disocete)
P0-4558 Ucblook St. P11 LBSM A P0-4DBPRDMA(Discrete)
P0-4550 P03 Presuren Low LSM A PC-4S5C FB LBM (Dsree (Discrete)
PCC-4DP53msFBr LghMD3VLl4A p0-455_FBLSMA (Discrete)
P0-9378 Cent Paess Pight-High Olm) Spray, PhlB lain LSM A P0-5378_FBLOM A (Discrata)
A0F414 Loap 1 Law Flaw Bypasa A .PO-4)BypA(Discrete)
FC-424_ypAPF-424 Loop 2 Law Plow Bypasa A P0-42BypA(Discrete)
FO-434 Lacy S Lew PRn Bypans A PC-434_BypA (Discrete)*
P0-444 Leap 4 Leow Plow Sypaaa A F0-444 Byp A (Discrete) pO-455A P03 Pressure High Bypass A PC-45AByp A (Discrete) 
'p0-4538 Ucbsck Sl, P11 Bypass A PC-453BSpypA (Ciscreta)
PC-45C Bp AP0-4440 P03 Prescure Lore Bypass A P-3QyA(Discrete) PC-455D.BypA PO-455D P03 Pressure Low-Lnw Bypass A (Discrete 
*PC-455 Byp A P0-455E P03 Prescore High -PORVBypassA F-18yA(Discrete) 
'p0-B378 Bo A p0-3378 Clint Press High-High cent Spray. Ph B Ilan Bypass A ALD-A Chassis Fower Bupply 1 Failure (+48VA)PSSFAIL IA (Disrete SLS-AFILCha ssis PawerSupl 2 2Falture )a4VB PSO iLL- (Discrete)
/ 9 \ PS1 FlL ]A Power Supply I Fallow I PS4 FriL A -,__ '_-___ Pew c r B_____ _ F __ur _ .. .PSFXL- (Discrete)
FS2FLJAALa Contact Wesing Supply' I FaIu re PS2F, L IA(Discrete)
SSAlLIA ALS Cantact Watting Supply 2 FaillowP I TAB Status A PS I TAR Swit4h Statb,-- -(ODreeta) atI PPS IaJanCleaaA PSt...IAlaroClear t LUY-PSI D DI A PPS I Chassis A Out oflSeraice e (Discrete)
UY-PSIADIVA PPS I Chassis A Treuhle (Discrete)
U3-pSI B DIM A PPS I Chassis A Channel Bopass (Otac~eta)
UY-PSI C DIVA PPD I Chassis A Failure (Discrete)
Loop Puse A~(Discrete)
A tlit Process Protection System Interface Requirements Specification Revision:
9 Page 26 of 78 Figure 1-3 Replacement PPS Architecture 
-Set I ALS-B and Isolation Devices PPS Protection Set I RS0-485TAB Data Unit t(Diseanneeted when not in usenaorsaio/a RO-4f2Data UrleTXBi1 
~ oaaa TX Only Data Link TXB2 I TX Only 8-L2) VWetrtatlatn
+ 11 lit S(01) (4-2O rnA)(2 124Leap 2*(8:2 FT424(4-20 emA)(02) FT-434 (4-20 mA)(04) FT-444 Lee4-2 TE-41iBLepOTAel-(2200 )20-4100Loep 
&#xb6; DiTATtaet-IB (2000 )TE-4110 -Leapi1 DflATlent-2B v (2OO 0)TE-4120 Leapt1 DiTAThOt,,-3B (20)0 )iOWA ~ Laap 2WR1 Temp I-tt Leg (2OO 0)TE-423B Leap 200WR Temp Celd Leg*(2OO 0)(0(2 1-400P0R PressumePT455(4-20 mA,)(0(2 T-527Containmentf Preus (4-20 nrA)FC-414_FOLOMB FC-414 LeaptI Lat Roew LOM B (Diacete)F0-424_F0 LOMB FC-424 Leap 2 Law Flew LOM B (Ditamte)FC34_F4_LOM0 P0F-444 Lap43 Law Flew LOM B (Diserete)
FC-4500 Loopea St PitR LOMB F0-44_BPLOMB (Dirnette)
P0-00 P0R Prasut Lawh LOM B PO-455AF0LSM B (Disetete)
P0-455BP2 Puwnbeo 1 LawLwOM B pO-455DFPLSMB (Disetete) 
-P0-40EFSLOMB P0-4500 P00 Ptessure High -PORVe LOM B PC'45EFE]LSM B(Diserete)*
P0-527B Chat Pteas Hight-High Ctint Spiny. Ph B lain LOM B*P0-037B..F LOM B (Oiserete)
F0-424 Leap 2 Lew Flaw Bypaea F0-424 BypB (Disceite)*
P0-424yp ~ FP-434 LoopS2Lew Flew Bypaea B FC-444 Leap 4 Lew Flew Bypem B *FC-4A4_BypB (Diserete) pO-455A P20 Ptraemsr High Bypaaa B *PC-455A BypB (Diserete)
PC-405B Unkleak SI, Pl1 Bypass B , pO-4500 ypB icee pcP~i --455 ne PePr stee LwByps 2 Pelr FC-45C._ypB(Disutete)
PS2PJLO PLOC4,5 Rpentautrettn Supplyw Bpassure pC-5 DBPBLI AL (eDtet rettin *upy2alr PC-455_BypB(Discretel PPC-I37BBSttuetBPr1oTA Sah-itgh Otateery hBIsaBps~(Discette)
P PO Fer CLea IB PL Casis Power Cuple ailre +8B (Diturete) r ....,i I F0-414 B Leapt 1RuLowFlow Trie (ODsuente)
FC-424,B Leap 20R' Lam Flew Trip (Dentat~e)
F-454_B LeapS 3Or Lem Flew Ttip (Disctete)
F0-444 B Trip ALS-B TB-4liB DTA Leapi1 Teald-2 (4-20 ertA) l-TE-4100 DiT'ALoepi1 That-tB (4-Ze tA)20-4110 OTlA Leapt1 Thot-2B (4-20etA)-
TE-4i20 OlTA Leapt Thato-3B (4-20artA)
TE-423A Leep 2 Hat Leg Tamp (4-20 mA)*TE-423B Leap 2 DaId Leg Temp (4-2o re,)P C-455AB PZR Prnurem High On Trip (Disaeete)
PO-.455 B_ Unhlea< SI P-it (Disremte)
P0-455C0 PB PZRFeneaw Lam R0 Trip (Diserete)
PC-455DB P00 Prenum Lew-Lew SI (Diserete) p0-007B B Ctm1 Pteea HialtHlah Pit I sle. Clan Soame -SOPS OOPS SOPS PSI ] ean PSI] Treain PS I Tdean SPS Tdn SOPS SOPS SOPS SOPS R NASA IOOL ISOL rjr (Diuctete)-
PC-455EB P00 Preaure High P0RV (Diacrate) 
*" FM-434B Leap 3 Rx Cooantt Flaw (4-ZetmA)FM-444B Leap 450 Cealent Flew A (4-2o erA),TI LUY-PSIA DIV B PPSlo hassis BTrouhle 55PIB00B (Diacume)UYP FBDVBPPS I chassis 0 Chtneelr Bypaea (wiaetete UPY-PSICO10_B PPS I Chwassi B Failue~(gleerete)
Lean Pukse B (Disctete) 
*Ak lt I"l Process Protection System Interface Requirements Specification Revision:
9 Page 27 of 78 Figure 1-3, continued'4 INDICATIONS DIRECT FROM TRANSMITT'ER INPUT LOOP Tr116n ($9) LT-359 (4-2001m) -459A VB2),4U-4590 PlOHP)Loop 1 St 11 o P1063 Triton(S 14) pT1-504 (4.201rnA)
PI-5144 d03B). P1.514B QH0P). E0FDO NVBA)T4oop50) 11-24 00001i00 P1106 p1-504A (483). p1.524B (HO P). E4FDO (NB4)Tdco ('35) P-524 (4-240 rnA)T,163n (605) p11-533 L0pO2010 10 P1-534A (183). p1-534B (1S p). ERFDO (NB4)(4-20 rnA4)Tol63 n (507) PT-543 Loop 4 Strnino P103 P-44ro) 148(OP.EPSNA (4-2o rnA)
I54 H ) RD V4 (4-;001n3) ifI 14 1+TriHco (515) P1-502 Lp str w (4-23114) 
" Trioo (5211) FT-522 Lo ~a .(4-24 rno)T2)63(1)02)
FT1.5320 op3SemI .(4-2011r4)
T2)6 (s3110) P1T-542 Lop4Seml _(4-2001mA)
T106n ($18) LT-520 -42 m) ](4-20 rA 116n11520)21T-040 Tu10in Impu Pr11r3 -.)4-22 113)11)630(65)
PT1-455 -ZRP~(4-20044)
I (4-20 rno)T11631(8($214) 
-514 (4-20 040)(4-20 ro,)4A53-A150-4048 R. Coi5n1P1owLoop 1 (4-25635)4A4-3244-4248 R& oont(32FlwA)L63 2
RX oolat4FI2L5o13)
(4-20630)(4-2011mA)
TypBcAl SIC ISO LAT)ION DEVICES, (4-20 soS)P00-522 0 Loop2Sloe,112ow (4-200100) 
-..P0M-5300200Lop 351001e86ml111w (4-20 mo4( P tC (4-2011m5)
)4-20o ( rn)- -..... ... .LM4-59010..203 Le002104 -530 N',B3) 50100M , DFW0S, AP05 (4-2003A)104-533 2 S2G3 Loool ...-.(4-208105)
PM0505_111Tur)00e410026u216P0u6 200-305-1P2R Pr4006 20t P4'R P6306314n100'1PJ11 55 P2P41 54 5E1.005 PC1.05,82H5105 (4-20 isA)2-M2-0531 PZHI044Il o p210LeooIel C 1on2[(4501, 82( 215pC (4-20is5(PM0-514_ Loop 102021001120010104 1 D3W05 (4-230105)
PM524_000Lop 252024e10,0o 1116 81141055 (4-20 mA)28M034_0 Loop 0 51oeam14ne P2000r1 ...(4-201101)
(4-20 mA)(115-433811 05 Coobot FPkW Loop 2lo 0l-4204184B)
(4-20 o34(1100-348B 1105 Cooont FIPlooolo 3 2o P2-43400V22 (4-20O m)F50-44B 1 Ho 1063811 1110 Loop (4-20o 3A 8100R 4 I I+, LP21 1111 2)0 4-IF..25.... f 1-1020055S......0 -t]i-H1-P45410105 114224005 4H-HH-H 4 t-250005 -o 1-1-HH-HH-F153210105 HF-HH-2524005 L4 1 1-] 1142800 4 1-009)Promotion Set I 005Io MAS 4 4 I I A2-53 411Q 41100110043odwhen0nt1in2u)
I6 Pr0ot )Ietl 60n Pr1 e Prot Set I HMI 415 40' R05-422 Data Link T0B2 FROT SET I(ALS 0HAS o00puter110 KV Peripheral 55-405 145 0410 0118 MAINTENANCE 
'2 SwthDevices
)660101241410116( WORKSTATION 4151 8B0 hnnt nu)] COMPUTER ALS B"Q Daa Lik 3<B2KVM Switch, HM( peripherals shown on F1igsro 1-2)
Process Protection System Interface Requirements Specification Revision:
9 Page 28 of 78 Figure 1-4 Replacement PPS Architecture 
-Set I Safety-Related Tricon Main Chassis PPS Protection Set I One-Way Td/annex 5512 I1 Data Link A[B (Tryp of 2) T P aea Data Link A PORT T P aea (T yp ot 2) ADGREDATOP Ttoonnx N5ET2 (Typ ot 2) 14 (Typ ot 2) Warkstat/on 
]i,1 I I , I 4, (55) PT-455 P 420 Pnoor DA)Prom (ALS) TE-,4f3A Loop)1 WP Tamp Hot Leg r (4-20 mAk) -Ftom (ALO) TE-412B Leapt1 WR Tenmp Cold Log i (4-20 ink) -From (ALO) TE-423A Loop 2 WP Tamp Hot Log (4-20 rAP) -From (ALS) 10-423B Loop 2 WPR Temp Cold Leg v-(4.20 oAk) -5E4A Upper Filox (0-t150) VD Lower Filux (0-1050) -O Fromn(ALS)
TE-4t00 Loop 1 DflA Toold-f -m Fmom(AL0)
TE-AttS Loop I DTTATooid-2 (4-20 ink)Fromn(AL0)
TE-4toA Loop 1 DnIA That-IA .(4.20 ink)Pram (AL0) 15-4500 Loop) 01 D 5 Thaot-tB (4-20 ink) -Pram (ALS) TE-4ttA Loop) DrA Thot-2A -m (4-20 erA) -From (ALS) TE11-55 Loop t D'n'AThot-2B (4-20e ) -From (ALO) TE-4t2A Loop)1 D&#xa3;A Thot-3A (4-2Omk)A)
From (ALO) TE-4t20 Loop)1 DtTATtrot-30 
-1 (4-20 erA) -PZR Love)(05) LT-4059 (-0ok (4-20 ink)(Ott) PT-522 Loop 2 SteamS ow -1 (4-20 mA) -($t2) PT-522 Loop 2 Steam) ow -(4-20 ink)(012) FT-532 Lop3te fow (4-20 ink)(814) PT-542 Leapt4 SW//aemPtowo (4-20 mA) -(0)4) PT-524 Loop 2 SW/lne Presor (4-20 onA) -(05 154 Loop 2 Sgrin/e Pwoess (4-20 ink) -Loop 4 SonlionFePres (057) PT-544 (42 ik/SDG Level ($)8) LT-529 420ik S/D23Level
($01) LT-539 (4-20 oak) *(80 T55 Tart/ne impulee Pressrero (020) T-SOS (4-20 -TRICON MAIN CHASSIS 1S TMr-413A Loop)I Hot Leg Templeo TR-413 (PB2) & RkLIS (PAM4) MOPR4 (4-20 mA)Thf-4t3B Loop)t Cold Leg Temp to TR-4t3 6/B2) MOP (4-20 reA)"Thf422A Loop 2 Hot Leg Tomp re TR--425 (PB2)5 PURLlS (FP514) MOP (4-20 mA)Ttffv-423B Loop 2 Cold Leo Terio to TR-422 (PB2) ...(4-20 rnA)FM-5t2D Loop) O teamosow ro PM-oft2-2 Isooltor (4-20 rnA)FM-522D Loop)t Stoarof ow to FM-022-2 Isooator (4-20 mAR)FM- Is/ FM-512_2 Loop)1 SteamS ow to FI-5)2 (P03)5 SPECFS (PB1)) O Y ~~(4-20 ink)
* MR it/( FM-522_2 Loop 2 Staamfoow to S F/-5022(VB3)S&CEFDS (P0(.0 n MOP 0B22 FM-532_2 Loop S Steam) ow to (P0I/ I53 /3)0 SPECFS (P04) MO ( "-e-j"e-BD2 I/1 FM-542_2 Loop 4 0/eaamtow to P0 Ft-S4S 6S3(5 SPECFS (P/84 MO (4-20mA
* MC FM-532D Loop)1 Steamflow to FM-522-D Iso/ator (4-20 mrA)FM-5,42 D Loop)I Steamflow to FM-542-2 Ilootator (4-20 oak)*0-10~ VDC Powered input from NIS Process Protection System Interface Requirements Specification Revision:
9 Page 29 of 78 Figure 1-5 Replacement PPS Architecture 
-Set I Safety-Related Tricon Primary RXM Chassis PPS Protection Set I LPiD DRAOOS QUFA Loop I Oh. ODDDOStSwitc (Disoote)LPITF OOS UD Loop 100000 DoSSitchr (Disoere)1455000P05 Leoel Oh. DOS Dswrth P5190050 Lop5Deeloc DSDla (Disoret)FSS2_00S LopOp 05. OOS Switch (Diessee)F532 DOSLoops2Stesrefloo Oh. OOS Switch F _OS(Distase)-
F532_OOS Loopo3 SeemeoreCh.DDOS itch (Distaste)
P~ODSLoop 4 Dtemersje rs Oh. DOS Dwitth r PSSOSDSLoo2Spa1Seamine Pre~ss Oh. DOS Dwitds pS14OOS(Disase)
P52400SLoop 3 S~ornefe Pross. Ch. DOS Doltdr P530000 (Distate)P544OOSLoop 4 Dreorline Pres.> Oh. DOO DSwitchir PD40DDS (Ditatte)DID S Level Oh. ODD Switch$20000 (Distete)LSDOSiG 3Leosi Oht OOS Swioh 1 P505_OOS TuoLine smttee Press. Oh Dos Swe~oS Loop P teohtD)si T413AOOSLoop S uR Treat ODD  T~t~tODS(Disreete)
T4330..OOS (Distete)T4230DDOO LoopO2WR "ootdOOS Switch I (Distate)(Distaste)
TO-O0DAp  (Distaeto)
TS/411G DPDT trio Dootus 1 (Disteete)
TS!41D Tosq Loo-LrewP12 Tip Status 1 (Distaete)
TS/412G Toos Ls Trio Stairs T~tAIDG(Discrete)
LS/459A PT0 Lerei Alsh Trio Stems I ISIOSPA(Disteote)
LS!529A S/G 2 Hoh-HSsh ete P14 Trp Strtus 010550(Distaste)
LS2529B OrG Dies-Leo Leosl Trio Dtotrs "- I 1535290(Distaste)
LS/539A ,SrioOHteh-Hrsh Level Pie Trip Stesatu L~riS3SA(Disteote)
LSJ539B 050 Leo-Lso Leoe Trio Solous I (Disereet) psrs505A Turbine Iroulse Piessrre Hueh P53 Trio Stairs (Distate)p ris, o1 Loop I Lor Siteline Press Trip Stetms l (Disreete)
P55140 tOoD 1 Sitrnine Pres Hieh Se~ewo Rete Tros Stems .(Disteeta) p~t24ALoop 2 Lop Orenere Free Tdp Stes )(Disotase) p52C LoopS2 Otrtlise Press HiSh a SeRts Trio Doorus P~riSS4O(Disreere)
P51534A Looo 5 LoroSpelite Press Top Smtets j (Disreors)
PS05300 Lepo3 Soupie Press Hioh Neotarve Sote Trio Sotots -I.(Distete)p&544 Loop 4LaoStateneprsessTdp Status pbe4C tp 4 Sotnes Pres Hiph Npose ~eoRte Sris Doers -.=PS2SFJL~i5 Anaslo Loop wonpu PosreSuppt Failwe Reloy I PODS O~tS(Distaste)
PS7SFAI_15 Dis1oret Loop input Forest Sueppr Failure Relayr PD3OJFJL 15 (Dios~te)Disorp Loop teput Post Supply Failuis Rpela l PS48 /'JL PS6S FAIL 55 Aoloe Loop DOutput Poor Supplr FoitueRlop SP1n POFL.5(Discetes)sI A OL ~ Loep Orttur Poet Suopptw Pailiue RStari I1 pS lSFJ 15s tPoe oDrri .TR(CON ____PRIMARY RXM CHASSIS 23A LoeeS2 oldLeg Tesp. Leo-LTDOP 1 (Dossc~t)To-at D SOTDS Rx OTis (Distate)TC-4155 OPDT POs Trio TO-412D Tevo Lerw-Lso P15Il (Distaste)
TO-412G Sops Lops Feedwater  (Disoeta)LO-O459A PZR Level So Trip 1 (Distaste)
LO-529As/h 02 High-Hi 5 S Leost sTurbe Trip, FW Is~n PlO (Distate)L0--S~529 rSDG2Low-Low LesRa T~rip & A$W PupS~tar (Distaste)
LO-539h SrG 3Hit-hieSh Lean) STames Trip. Pt lets P50 (Distaste)
PO-DS0A Tuotie [reuoses Pre~sure 0.900t P13 SRNASA SSPS SOPS SSPD SOPS sOPS SOSP SOPS SOPS SOPS sOps SOPS (Distate)(Distrste)
P0-St1DGLoosI Stedine Press lIgh NesaoRat SoDmoiines 
[in e PO-s24ALoop2 re i Soepee Press St &StreLos lsw (Disetasi)(Distate)p0-534A Loops Ltosw nS Pr~ess SI &S~trnles ien Po-ssso Loop 3 hordies Pres High Negatse Rate Sotmines tie POS-4AhLO~p4 LeoStales Press 01 Stalnes Ilei (Discrete)
P0-5544 Leop4Otapep pressHigh DesoassesoDSprie~
Isis (Distate)..........
s oe Process Protection System Interface Requirements Specification Revision:
9 Page 30 of 78 Figure 1-6 Replacement PPS Architecture 
-Set I Non-Safety-Related Tricon Remote RXM Chassis PPS Protection Set I C ..... icat]orl Unks Fiber OTDT Interlocic C3 Manual Trip Switch TSNI1ID TSI411H PS8S05C (Discrete)
OPDT Interlock 04 Manual Trip Switch TRICON REMOTE RXM CHASSIS 3 (Disccete)
Turbine Low Power Interlock CO Manual Trip Switch (Discrete)
PS5NFAIL_15 Class II Analog Power Supply Failure Relay--Discnret)PS Isolator Power Supply Failure Relay P3NFAIL_15S(Discrete)
PSSNPILIS Isolator Power Supply Failure Relay PN.AI_ 5 (Discretel TM-4t2F TanS PCS MO 14-20 rmh) -P ,MR TM-411G Ouerterop Setpoint MCR (4.20 nrA)TM-411FP Overpoweer SelpointMO (4-20 rru)TM-11E Deltu-T PS C (4-20octA)
PM-P05h Turbine Imepulse PrecsureMO TO-411ID OTDT Interlock O3 (Discrete)
RNARA TC-ti tO OPOT Interlock 04 RNARA (Discrete)
P0-5505 Turbine Lore Power Intertock OSC5R (Discrete)
IRN A LY-529H PIG Low-Low Leueli"n'D Timer Actuated Alano-lMA (Disreete)
MA UY-P81A TRIOON Protection Setll Trouble AlanoMA (Discrete)
MA UY-PS'IRTRICON Prnotecion Set I Channel BYP Alarrm Ipioretl ~MAS (Discrete)
TY-41tTRICON Protection Set RTD Failure Alarm r MAS (Discrete)
FF5 Set I Chaneel Out ot Seruice Piano (Disocrte)
PROT SET I TRICON MAINTENANCE WORKSTATION COMPUTER Trionon n 11Prot Setl I Prot SetlI Prot SellI ALP SwthPrihrl MWS Comrputer 
~ Sic eihrl* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System interface Requirements Specification Revision:
9 Page 31 of 7B Figure 1-7 Replacement PPS Architecture 
-Set II ALS-A PPS Protection Set II RSt485 TAB Data Onk Disoonnected when not i se Al WortrstatloioABU PS/422 Data LitS TrXol TX Only l PPCGatewayp RD1422 Data Unk TXB2[ TX Onty Al Workstation tl gt I 
()22(FT-425 Loop 2 (4-20 oX)*($3) FT-435LOop 30](XI) T-AID(4-20 itA)[$4) TJ,45Loop 4 (04) r-44X(4-20 mA)TB-433A WR Tomp Loop 3 Hot Lag (2000a)TE-433iB WR Temp Loop 2 Cold Lag (200 0)T0-020B Loop 2 VIT-A Tooid-l (2000Q)*TE-400A Loop 2 DTTA That-IA l (0000Q)TE-4050 Loop 2 That-OX (2000Q)TB-422A Loop 2 Thot-IX (20030)(00) T-aSPPOR Preooun 4-20 0n ($6 PT938Containment Poer ()PTBB(4-20 p0A)FCoH1._FOJX0.LA FO-415 ow rLOM A (Disorete)
FO-425 FB LBMA F-425 Loop 0 Lra Flowa LO A*FC-435_0_0M A F0-430 Loop I Low Flpoa 10000 PO-A5_FPLBMA F0-445 Loop 4 Low Flow LOU A*(Disoete)PC-4506ABLOU
_A P0-4560 P2R Prsoor Hptr LOU A 1 P0-456B F0SLtM A P0-4000 Unhblock F1 -al I.S A PC-456OFRLOMA P0-4060 P20) Prasson Low LOB A (Disoete)pC-4560 DF LOMA P0-006D POP Pooeoun LowLow St LOB A *(Dinwete)PO-456E F LXMA P0-4560 FOB Fnessora High-POOP LAM A (Discrete P0-931AFBLSM_
P0-0300 Coot Papas High SI, Ph. A lain LOB A *(Discrete)
PC-936BBLSMA P0-930B Ctot Press 5igh-High Ph-0 loIsn, C~nt Spray, Oteamielnapin LOM A*P0-OAB.BLXrLA(Discrte)
FC-015 Loop ILow Flo BypassoA*FC-415_BypA (DiowotH)FO-425 Loop02Lo BoypaooA FC-425_BypA (Diowete) 
'FC-435_PypA FC-430 Loop 3 Low Plow BypoassA*FC445_BypA F445 Loopo4Low Plow Bypass A (DisPte), pC-45ABy Ap0-4000 P0R Pressute 6igh BypoossA P0-400 P~ A(Discrete)
P0-,4560 Unhloco 0I P-Il1 BypassoA .(Disreate)
PC-456_BypAP04060 POP Ponsosuno Low aypass A PC-4003apH(Disweto)
P0-43 g..yp_ P0.4000 POP Preamo LowLow 0I BypasMA *(Discrete)
P04060gap AP0-406B POP Prossone High-POOH Bypasso PC-016A Byp A p0-010A Otnrt Press H00h 0I Ph 0 slon BPasps A P0-OI0B Byp_ P0-936P Coot Preos tloth-Pllh P0.0 ( sin. Coot X~anao Otearnlino Isn Bopaso A PS3FAIL IIA ALS-A OhassisPowen rrop 1 Failura to40HA--- (Dowoeto)A (BCasisaownrap)oFoua(00 PS4FAILjiA PAralog Input Loop Prowen Supply I Fallurs (Disowe) I\ PS2FAILJIA 010 Cantost Waning Supain I Failure*w~(Disceta)
FF0S1TAB Sta0 (sA lantn PPti .......a_ A ...
..
* LOop 1L~w Flow Pa laip O1XSPX PC-4250.A Loop 2 Low Flow Ro Tdp ...4 (DOwo~to)FC-430 A LOOOI3Low FlowRJCTo (Disooto)T-4033A Loop 3 Hot Log
* PS ll Town (4-20 mar)TP-4200T6oo1-l
)4-20otoot TP-420A That-lA (4-20 tro)AL P40 TE*422A Tnot-3A (4-20 mA)P0-00000A POP Prpoour High R0 Trdp *(Discrete)
PSll Tduon PS ll Ttloon P8 ll Tdoon SPSIIT n saPs OXPO SOPO P0-4060A POX Frooun Low Rto 00p PC45PDA POP Presoute Loloaw 0I (0ia0e00)P0-0100 A CotmPnessHrhi.P Ih. Atosn (Discrete(PC-O3OBAOCtt Papas High-High Ph.0 loIsn, Cowl Optap. Stoamilno lisn (01000e00)
PC-400D A POP Prmssure 0104-POOH (Discret) 
-....PM-4lOP Loops Poox oolant Flow IO FM-425B Loop 2 Rx Calarrt FloIOO 14-20 rno) -O L I_P-P DIV0_A FF0 I1 Chassis 000 aIut obweP (Diwete) J IUY-PSOX D0V00 PPX gi Chassis A Troubl (Discrte)UH-P2aDwA FF0 it Chaoois A Channel Bypass (Dis to-t e)UY-rPO00DI 04 FF0))I Chassiso aA Fur LOisnto)!R (It Process Protection System Interface Requirements Specification Revision:
9 Page 32 of 78 Figure 1-8 Replacement PPS Architecture 
-Set II ALS-B and Isolation Devices PPS Protection Set II 001405 TAO Data LUnk /Disconneeted when eel in use Wrsao/S R01422 Data Lsnk 3T1XBI Slaa TX Only RS1422 Data Link "r0B2 oksfn t Il lit WI ($)F-1 4-20 rnA)(81 7.25Loop2 4S2) FT420(4-20GM)
(03) FT-430 Leap0 3n (op4-2 taO)(04) PT-448 Lee2prno TE-443A W0&#xa3;Temp Loop 4HotLeg (2005n)TE*443 S WO Temp Loeop -Celd Leg .(2045o)TE-421S Leap 2 OO-7A Teld-2 TE-4200 Leap 2 DT7A That-ISB TE-4210 Loop 2 D17A Thee-2S TE-AO2C Leap 2 D81A0T0ev-3S (So*) PT-456PZ0reu (04) PT-036202 FC-430 Leep CLaw Flew LOSM 8 F0-410_FB LOSMB(icee PC-MSPS LOF5 -,440 Lees 4 LaW Flew LOSE FC-420_FBLtSM_
8I PC-45 Lp 3L1Bow SM L1 PC.4300_FLSMB P {-0 is2 Pcte)u ne O FC.456SFELOMB FP-4000 Poop P4sv Leanlo LeaSM LO 8 PC-45AEPZR Pressuve Bigh-PS LOM e P0-456AFBLSMBE (Disanete)
PC-tS~p..B C-456lUnLoekp t e P-Iw 1pLSM (Disreste)
~~~~~PC-42teP6E 
-2 LaP 2ea PesueLaw 8010M B)Discrvete P0-456D 80_LS_ P0435D LepOLa Pre awr s B .(Diserete)
F0-415 Bypa P0-41S Lop4I Low Flaw Bypacs B 1 (Discetee)
P0-485 Lop26 PLoew FLaw Sypeass FC-42CByJpB 
-Slavta FC-435 BypB P0-4352 Loop 3ws Leaw FI ae SIypass B O 1 F0-Q45_BypB FC-44001 Pwss 4551 Ph. F lewB~s Byps PCC4500BByp B PvasHg-Sigh Ph. areIslre.
Cga Bypva.seas Isl Eyaa PC-, 456_yp..B (Disceteo)
P0-40006Cy P0-4506 820 Peessura 5Low00 Bypeas a .(Disrete)v PS-06DIypB P400-D Chasi Preessure LooI 2 SFelin eBVA( m (Oiserete)
PtP-3AILyp_8 Males3 Input LrepsHg 1 P h.ee Supplyn Bpasuv B PO4-03LB1 M alPes s Hg-ihP BInput Leap SeevupryStmlne 2a Isute Bps f ~~~~ALS- Chnassi Pwern Supply t Failurew 8A 85PaFJ_,, (Dslteveve P6FAILlie ALO- Ceh S a nsing P owupply 2 Poillute 48 p8541 ABILIIs (Disretae) f ~PPS1I Alarm Clesr t P II 0 0 0 (Dis~etela P0-4005 BLeaa t 00 Law FewTde (Dieseete)
PC-425_B L00p 2 Ro Lean PawTrip (Disarete)
FO-435_BLoop 3ERxLewPRcawTdp P0-MO5 B Loop 4-BaLaw Fla Tap 30-4430 Loepd 0evo Leo (4-20 etA)70-4438 Loep 4 Celd Lag (4-20 enA)TP-42tBETeld-2 (4-20 nvuh TE-4200 "rhaI-IB (4-20 etA)TE-4200 Thea-2B (4-20 eA)TE-422C Thet-OB SOPS P~ll Tlcen P~ll Tdan SOPS SOPS SOPS 0080 ALS-B (4-20 ae,)8C0-48 8820R Passuew Hieh Be Tde (Disretee) 8-4018 B UnhletoSIP-It1 (Discetee)
PC-406QB 828 Pressure Law Re Tdp l (Diso-ete)
PC-4018_S8PZR veessure Lean-Law SI PC.036A B Clint Press High 0I,Ph.8B Isle il (Disante)PC-0368_B0Ctm Pesas nigh-high Po. El]sie. Ctent Opray. Otmilne Isle PC-40082B PZR Pessure High -PORV 01580AS (D~scenete)
FM-4308 Leap 300x Coolanl Flaw 1 IO (4-2o04 IOOL FM-O445B Lp 4 R0Coolant low SQ (4-20 peA) i SL I U80-8022 2IM B PPSlIlonassis B Troubevae l (Bisanste)
LI*P-POPEDIVeB 
~PP I Chassis E Channel Eypase 1U0-8S202D018 P80S II hassis 8 Failure~(Disewte)
Leap PulseB (Disuvate)
A lt Process Protection System Interface Requirements Specification Revision:
9 Page 33 of 78 Figure 1-8, continued INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP P020)2200 (4.20 mA, , LLo4600COOXV-2)60 T0(0)P215 Loop I 22o,,P~es" 24400 02 40 (4-202n,4) Tipon2(214( pT-SOS (4-20 r2*A) } p0-534 0V30) EPPOS (200)t , (4-20 220)' T 24,.000(02)
Pr-9os P2426 (2021), 2RFD00(25)
Trc0n (020) PT-523 Loop 002 St 0ml 720222(0-2)14-50 Troon (042) FT-520 LoopO 220,2010,, Trkooo (0 13)1FT,,54 Loop 40 0tearm,, (0-020r2) pT..450 056 ,,, Thopo (22)12T-060 Pop LeoO (4-20024A) rTop, (010) PT2-5 LoppO2S~aToaPm~o (4-00240 Troon ($t22) PT-Sos Loop Step! 222 pmossu (4-002r4)--
T,20n ($14) pT_-045 0(02 St~]oe PlTrkoop(018)(LT..O (00029 Tr22on (022) PT-06 2024 pl,.Poo, (4-022o -A Tro 89)L-4 (0-024)2 n -02.2-0 FM2-05B Rx, To24ap Plow Lopp1 0L0-2 P2-0445 0,, PodOpt Flop LopoO (0-020) 522-Typ:202 PO-513_1 Loops1 Stoarboo to D-20 (0-20024)P0-523 1 oo 02400)0 (0-00e24) 
-FM-533_J Loop 0 0O,,20oo0oOF02C (4-02 r24)PO-sti L.oop 4 S~opro 22D0W)0 (4-0024), ..DEVICES-c  (4-020) nv (4-00 nW4)pM-535_1 tooo 0~ 0),,oaIl224 P022su0 Ft-0)F 0 (4-20o224) p0 -005_ Loo 4 0t20ndin4 P2s4u20to 020C0 2(2. P20 pCS020.02 20,F 242.02 (4-020 m)26-0044 .2O0 0202)(4-020224) 
-FM0-4244 2 0,, Co~opnt o Loop 42 t I424 (000)FM-0044 1 RoCooo Flop LoopOO P0-043S0B)00) flM-040j 24 Cooent Pow Loop4 o (2020 ,) Ia+I " i t LP2-OTP&2OS Let2._nO2O
-1F-1F L462002O+ -IF-I--I F-I F...... -tH.... -{F.... -2o -700-,00-2...... 002.... -020-O .00400 to 01?4+p00422,- ProItTret n Prot Set II HMI.S"," RO-o24D,,0L002X00 PROT SET(IIALSMANEAC Peripheral WORKSTATION SwichDevices ALS B'Q d whn u) I COPUTEKV Swo(tch. NM) peripherats shown on Figure b-lb Process Protection System Interface Requirements Specification Revision:
9 Page 34 of 78 Figure 1-9 Replacement PPS Architecture 
-Set II Safety-Related Tricon Main Chassis PPS Protection Set II One-Way Triconox NET2D Dote Link Date Link A PORT fTyp of 2) To PPODeGoe-ay (fyp of 2) }) AGO REDATORS Tr/ooneo SET2 TP B Dote Link (Typot2) ) (Tpot2) Wornstation t II (8)P-46 Loop 2 S/TA P0R Fnresure-Il (OR) T-ADS (4-DO mA)From (PLO) TE43 LoopO3WRTemnpneratue Hot (4-20ooOv(Fnom (PLS) TE.43 Loop OWR Teonpenatone Cocld ('4-20 onk)Fnom (ALD( TE-44S LooP 4 W Toonpenotone Hot Leg l (4-20 rnA)Fnom (ALO) TE-AS3S Loop 4AWRjTempenotore Cotd Legjl (4-DO inS)* NE-A2A Loop 2DSTA UppernF/ux (0-10 0D0)* NE-ADS Loop 2 DOTA Leone Pinox Fnom (ALD) TO-SODS Loop D DTiPA TcOotd-1 (4-DO noR)Fnom (.PLS) TE-4D15 Loop 2 DTTA Tood-D (4-DO ink)Fnom (ALD) TE-420A Loop 2 DSriA Thot-tA (4-DO0 WA)-Fnom(PLO TS-DOC Loop 2 S/TA Thor-ISB From (ALO) TE-4DIA (-2 LopD mA) ot- , LoopD2 D'rrA Thot-OS Fernm (ALO) TE-42"IO (4-DO mrA) -From (PLO) TE-4D1A Loop D D0ITA flnot-OB (4-DO WA)From (ALO) TE-4220 Loop 2 DnrA Toot-OS (4-DO rWA)Frm(DO) LT-42200 o D'0i4 Leont-3 _(4-DO WnA)(4-DO WA)Loop 2 OteamOow ($11)(FT-523 (4-D0 WA)(DID) FT-DOD Loop 0 Steamflow (4-DO WA)(Sl13) FT54 Loop 4 Oteamfiow (4-Do WA)(S4 T50 LOop I Steamltne Pressune (014) T-DtO (4-DO WA)(DD TOD Loop 2 teamline Fressroo ($15) PT-525 (4-DO WnA) (016) PT-DO5 Loop 3 Oteamline Peresure (4-DO WA)($r7) PT-DAD Loop 4 Dteamline Fressurame (4-DO WA)(018 LT-f5 S/GDt Lenel ($18) LT-519 (4-DO WA) -(Oro LT-AO /G04 Leoet ($19) T-549 (4-DO WnA)(S0 T56 Tat/inoe epu/ne Pressrem (DD TDS (4-DO WA) TRICON MAIN CHASSIS IS (4-DO WnA)TM-ADDS Loop 0 Cold Leg Tem-plo TA-ADD NOD2)(4-DO WA)TM-4A3A Loop A Sot Leg Temp to TO-DD NOD2) N RtoLID (PAM3O)(4-DO WA)TtA-AA3B Loop 4 Cold Leo Teme to TR-A44 NOD2)(4-DO WA)FM-53DO Loop t Oteamftow to FM-DtO-2 reolator MOO MOO 01 PM-013_2 Loop I Oteae-ton to O t FI-DID3S(SS)
S EFDOSI MOO1 I -.-l--( (4-DO WA) I C 0/] FM-ODD 0 Loop 2 Otoomtiow to 10 FM-D3DI Loop 0 Stormflowo to Pro- Fl-ODDNOD 
& SRFDS ~~(S OD ..., ..FO- F M-DAD_2 Loop 4 DSne-mtow to F/-DAD NOD3) 5SP5 NRFDS MOO IB2 (4-DO WnA) l C (4-DO rnD)PM-DOD3D Loop I Oteamflow to FM-02D-D (relator (A-DO WA)FM-DODD Loop t Dteamfloea to FM-DDD-D Isolator (4 r 2 0 WA)FM-DAOD Loop t Oteamflow to FM-D4D-2 Isooator (4-20 noA)*0-jQ VDC Powered Input from NISC icafion .....Copper"Links Process Protection System Interface Requirements Specification Revision:
9 Page 35 of 78 Figure 1-10 Replacement PPS Architecture -Set II Safety-Related Tricon Primary RXM Chassis PPS Protection Set II nI DP.sTAfA 51 LoopS O h. SOS LP2 D3AOOS(Shaete)
LTUO0DU Loop 2 010 0O5 Swoitchi LP2 _O/ OLoete) -PZP Leaet Ch. 000OSeSitch L460_OOS (D/swats)F513OOSLoop I Steanoloet 0h. 550 0stoPh"Loop 2 Steorelow 00.000S Switch P523OOS(Dinote I)Loops3 Stearnfcow 00.00 OS wti0 F533 OS(Dsrewte)
F5433OO0 Loop 4Stseamlow Cha. OOS Switch P (Dinsaste)
Loop I teamohre Pressure 0h. 0OS Switch -P535_OOS Loop 2 St ear'm/o Pasou C0.000 Switch (Dinsta)Loop 4 Stoorline Pteosure C0.00O0 Switch Ps45 COS (Dinotte)5SiG1Looel Ch, QOS Swuilutch 000 4 Leoel 00.000S Switch P506OOSTurbbine Ipuse Presuts 00. SOS Switch T453AS0SLoop 30WR Shot COS Set/th T433_OOS(Siscrete) 14055.555Loop 3 et ToOd 55S Switch T443A._OO Loop 4 WuSThotCOSS Sw~sh T4-05..SSSLoop 4 W TooTd 0OS Switch T443BOS(isectete)
P0-SchtABy Turbine Iwpulse Pressure High to P13 Bypass Switch TC-433A Loops 3 Ow Leg Towp. Low- LISPS Tdp Status T0-4210 STOTrT Tp Stotus TS/42t0(1Cee TO-A2tS POPT Trip Statue T01021G (Sioots)TOIOOS T0-200 Taos Loo-Loo Pt1 Trip Status ToosoooTO-422G 150o Low Trip Statue LO-40OA0PZR Lecol High Trip Status LSI400A(ist) 10/0100(O/ectete)
LC-540A 0/04 P igh-Hligh Lacat P14 Trip Status 10/040.0 (D~estIe)L0/0455 1-5408 S/O4tLew-Lwo Lae)e Trip Statue P0/01040-15 Loop49 I# SO4n PHeehHioSNguhLes PI4Tpats rpSaues P0-5200SG LoopsLow L~ievPel Trip Status PC-5306 Looprbtne/Ipus Pteoe.100 Neouh o Pale Trip StatUs P0/5300 SiAe PS/515APC-045A Loop 4 Low Srt/lins Preos Trip Status .PS51CP0-0505 Loop 4 Ott/na Ptess P/gh teguace Pats Top Status (P0/04et0 (Siescrete)
TC-41CCOTST PaxTrio TR]CON TC-42IGSOPST xTdip PRIMARY Ioiascret) 1 RXM TO-422D5Tavg Low-Low Pt2 CHASSIS (iosctete) 25 T0-4220 100010 PowawFedte.
Iinto 1 10-460A PZP Leuet H/oh Pa Trio (Diecrte)LC-519A 5/G51 OHOir+i/gh LhustlaTh/no Tate. PWlIsrt P 14 (Siotaete)
LC-510B 0101 Low-Low Laos) PaaTep &0AFW Pump Starts]L0-5490 S/G4 Hien-Pioh Leont Turbine Trio. PW Istn P 14 L0-C50554BSG4 Lww-LoLecet~l aTte& AW Prrp Starts SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS SOPS OsPO (Dhotete)P0-5500 Tutbine repulse Pressure h/ah to P13 -t(Disorete)
P0-5015A Loop I Low S0tline Press SI & OS/line Ilan l P0-0505 Loop 1 Statione Pwe High Nteouae Pate Son/hne nIs/sl (Sisaste)P0-520A Loop S Low son/ne Preso St & Sotmnne b/n 1 P0-5250 Loops 00S/Iins Paess ti/gh Negatue Pate Sooros letsn P0-030.0 Loops3 Low Sowl/na Press SItu Samline Isin P0-5300 LoopS Sa/Ilne Pwess P/gh Negativoe Rts Son/he nlot IDiscrete)
P0-5400 Loop 4 Low Son/ne Prees SI0 OS/One lesn (Disase)P0-0450 Loop 40S0m/ca Press P/gh Negotive Pate Son//ne losn)Soiste(e I n/Ore P/ben Oontwunboo/on Process Protection System Interface Requirements Specification Revision:
9 Page 36 of 78 Figure 1-11 Replacement PPS Architecture.-
Set II Non-Safety-Related Tricon Chassis PPS Protection Set II Links Fiber T T[ I T42D OTDT Interlock C3 Mansal Trip Swsiluk T014210(Discrete)
TS/42"IH OPDT Interlock 04 Manual Trio Swittch (Dincrete)
PS2NFAILI.6 Class II Analog Porcer Supply Failure Relay (Discrete)
PS5NFAIL_16 Class II Analog Fowcer Supply Failure Relay .(DIscrete)
PS3NFAIL_16 Isolator Fowcer Supply Failure Relay (Oiscrete)
TRICON TM-421 E Delta-T"4 tFO:Dr5IlU I C: RXM CHASSIS TM-421F Overpouwer Setpointl=
(4-20 rcA)TM-42tG Overtemp Setpoint MCR (4-20 mcA) -...TM-422F Taug PS C (4-20 mA) AS C PM-506A Turbine Impulse Pressure MC (4-20 mCR (Discrete) 
-....TC-421H OPDT Interiock C4 RAA (Discrete)
LY-519H P02 010 Lorc-Lcrw Lecel TTD Timer Actuated Alarm (Discrete)
MA UY-FS2ATRICON Froteclton Set II Troable Alurm .MA (Discrete)MA UY-FS2BTRICON Frotection Oet1II Charnel BYP Alarm I A (Discrete)
UiY*PO2C TRICON Prctection Oet RTD Failare Alaror A (Discrete)MA TY-421ITRICON Protection Set II DTTA RTD Failore Alarm MA (Discrete)MA FF0 Setti1 Channel Outetoferoice Alarms = MAS (Discrete)
PROT SET II TRICON MAINTENANCE WORKSTATION COMPUTER Tricen WonderWare Data Link 11 Prot Set IIHMI-' Prot Set II Peripheral Fret Set It ALS KVM SwitchDeis MWS Compuler eie* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System Interface Requirements Specification Revision:
9 Page 37 of 78 Figure 1-12 Replacement PPS Architecture 
-Set III ALS-A PPS Protection Set 111 RS/485 TAB Data I~nk -(>W~tta0~
Discennacted wean not in tewa W~ktgo/B 00/422 Data Unit TOBI TX Onl *FF0 Gateway S TX Only t ($1) FT-4t6 (4-2D wA) I (02) PT-426 Leap 2 (4-2o ena)(GD) FT-434 Leap 3 (4-3D wA)(04) FT-446 Leap 4 .(4-20 etA)TE4300 Leap 3 DTTA Tewld-t (200 G(TE-43DA Leaps O TTA That-IA (2oo0D)TE-431A LnopS3DTrA Thet-2A .(2oo D)TE-432A Leap 3 DTIA Ttwt-3A I (20o 0)(G5) pT-457 P0R Ptasauta (4-20 reA)Ceetainreent Paess (GB) PT-935 (4.DwA FO-416eLoopt Leer Flaw LGM A FC-4IG.FB LDM A (Discrete)
FC-420 Leap 2 Law Flaw LGM A P0-426_FBLSMA (Discrete)FBLSMAFC-43ALoop3LecwFlaw LSMA .F0-46 PBL~lA(Discrete)
FO-446Loop 4 Low Flew LOM A FO-446_FBLMA (Discrete)
POC.457A P0R Pressure High LSM A P C-4G7AFBLG MA (Discrete)
PC-4576 Dnbleckr SI P-It1 LOB A PO-457BFBL0MA (Discrete)
P0-57 P0R Pressure Law LOMA PO-4S7C-FB-LGM-A (Discrete) 1 P0-4570 POR Pressure Law-Law LOM A PO-4GPFBLSMA(Discrete)
P0-OGBA Chat Press High DI. Fh. A Isle LOG A*PC-435A FBLMA (Discrete)
P0-0358 00mt Press tigh-Pighr Ph B Isle, Orret Gprey, Gtwiine Isle LGM A P-45_FM A(Discreete)
PC-457EBLSMAP0-407E P2R prescure High PDRV LDM A*P0-430 ED OG A(Discrete)
F0-416 Lacy I Law Flaw Bypass A PO-4t~yoA(Discrete)
F0-420 Leap 2 Law Flaw Bypass A FO-42BypA(Discrete)
P0.436 Leap 3 Law Flaw Bypess A F0-436 BypA  FC-4 4_BypA FP-..440 Leap 4 Law Flaw Bypass A*FO-B57A P0R Precsaue H gh Bypass A PC-4G7A Byp A (Discrete) 
-P0-407B DUhbsocr St P-li Bypass A P0-407BByp A (Discrete)*
pC-47CBpAP0-4570 P00 Pressure Law Bypass A P0-470 Bp A(Discrete)
PC-457_BypAp0-4575 FOR Pressure Law-Law Bypass A 1 P0-43D~ypA(Discrete)
P0-OI5A 000t press High SI. Ph. A Isis Bypass A l P0-035A BypA (Discrete)
P-3_BpA P0-93B6 Ontmt Press it~gh-Itigh FhOB Isis, Chat Sprey. Otrlhre Isle Bypass A -l P0-030BypA(Disreete)
PC-45706Byp A P0-4576FB PtRPesuscr High P06RV Bypass A*/
ALO-AoChassis Pawer Supply' t Failure ()4eVA)(Discrete)PG6EAJLIIIA A (Discrete)
PSI FAILIIIA Anelog InpUt Leap Fewer Gupply t Failure (Discrete) 
'pPD4F/JLiIliA Anralag Input Loop Fewer Supply 2 Failure (Discrete)
I PG2PAILIiIA ALD Coetewt Wetting Gupply t Failure PSBFAILIlIA 
-ALO ContactD WettPing ypp 2 FaIlure -TAB Switch Gratus FF0 it TB GrtusA(Discrete)
F PGltPAre~eAParre Clear Ti (Discrete)
FC-4166A Leapt1 Law Flew Be Teip (Discrete)
F0-426_A Leap 2 Law Flaw Be Trip (Liscrete)
F0-43_A Leap 3 Law Flaw Ba Trip 1 (Oiscrete)
F0-446 A Leap 4 Law Flew Ra Trip 1 (Discwete)
TE-4306 SErA Leap 3 Tssd-1 (4-20 erA)TE-4306 DTTA Leap 3 Tnat-lA (4-2600m)TE-431A 0T1A Leap 3 That-2A (4-20 wA)TE-432A 0176 Leap 3 That-3A DGPS SSPG PG IIi Trloon P$0Il1 Trloon$SPO SSPG (4-20 wA)P0C-457AA PZR Pressure High Re Trip ALS-A (Discrete)
P0-457B A Daitblar $1iP-Il (Discrete)
P0-457G_ PZ6 Pressure Law Ra Trip (Discrete) p0-4570 A FZR Pressure Law-Law SI (Discrete) p0-035A6 A Cet Press High SI, PB. A Isle..... _A .........rg 
......PC-45766A PZ6 Pressuwe High PDRV -ll RN4AG (Discrtee)
PM-4t60Ba RCoaent Flaw Leapt 1IG]OL (4-20 emA)FM-206B Re Coolant Flaw Leap 2 IGO L (4-20 mtA)
* IO UY-PG3D DIV A PP~lii~mellohassisA OUrt oferaiaa  UY-PS3A DIV A PPS Ig Cthsis ATrouble (Discrete)
UY-PS3B DIVA FFS III Ohescal Bypass (Discrete)
UY-POS3O DIVA PPS Ill Failure (Discrete)
Leap Plses A (Discrete)
I Process Protection System Revision:
9 Interface Requirements Specification Page 38 of 78 Figure 1-13 Replacement PPS Architecture 
-Set ill1ALS-B and Isolation Devices PPS Protection Set III 651405 TAB Data Link Cwultinwo Disconnented when ant in use -,, okte~r!S RS1422 Data Unk TXB61 031422 OnlyPPO Gateway ixOnly tl u~t(B1)FT-416Lop (32) 20-420 (33) FT-430Lop2 l ($34) P-446Lop TE-4316 Laop 3 DnIA Taold-2 1 TE..4330 Leap 3 DOFrA That-lB TE..4310 Leap 3 DTrA Tntot-2B TE-432C LeapS3 DTrA Totat3B (05) PT-457 PRPesr (08) 1-933Cantainmeet Preen FC-4t16 LLMop(IaLwete)
LM P0-416 FB_LOM_B -P0-46 PBLOMP0-426 Laop 4 Law Flaw LOM B PC-4276 FBLOM B PC4O7CPLOMO PC437 6 Loprtur LawFlw LOM B PO-.36..FBLSMB P F3AC 8Lor p P 4e High Fth.Alain L OM B I P0-4370.PBLOMBPD-4576 P2R Pressure High POLOM B PC'457A B LSM B(Dscerete) l FC-4t~ypBP0-457B LeaptoLawSFlawtB1paa B P0-452C Lep 2ssr LawFlw BypeM B FC-452CFBSM_ (Disarete)
FO-30Bp3P0-457B PLPessur Law-Flaw LMByaB P0C4457Leap 4 Law.Flawi Bypate)Pc-g35A FB LSMB ~P0-357A PCtmwaeres High ByPh.AusnaL B .(Diacrete)
PC-935 QByF_ pMB PC9B CrtPress7 Pih26 Pre Itaur Law Bypraye BmlntaaLMB 
, (Discwete)
P0-4570 P2R Preasure Lan-La PRLBypn B PC-470.Bp.B(Disareata)
P0 ,-SODA Chat Ptee High S w PhBAtleypass B PO9-416Byp B (Dinerete)
FC-326_BypB (0D1 htPrt -o- igsP6l~,c hate SpaOhlr li ypt POO7P~ypBP0-457A P2R Preesare High POHBypass B PS-45ALBy11B (iscerete) 
-'PC-PAL57B1 UnbCha s~eweSI P-IBp~uass B 4uee PC-47BBpB Diesretea)
PC-47C Bp..B(Disrwete)
PC457D Byp B(Diswete) lr PC-93a._JIB ALS (Diseath e )r upy alr (Discretel L I liBALS- Chrrsis P eower supply 2 FaIlure (4V)" PSOFAIL 1116 L- h ssis oe 0p ~l~ .S.PPS I TB~taang(Discrete) 4 PPO FIllXa IB Clear9 Input Lo APowe Cuple'2at lr I I(Diascrt) tu-nteJe Loap t awuaw LO-law tap (Ds lcretea)F0-4286..
Leap 2 Rx Law Flew Tdp (Dinarete) 1 F0-436 B LeanO 3Re Law Flow Tre -(Discrte)FC-440 B Looae4BuLow Row T~e T3-4316 OTnTA Leap 3 Teald-2-SOPS-SPS-SOPS-SPSIITcn-PS Igl Ttiron-PS IIl Triton (4-20 etA)TE043005DTA Leap 3 That-t B (4-20 etA)T3-4310 DTIrA Leap 3 That-2B (4-20 etA)T6-4320 OTTO Loop OlTrot-OB (4-20 euA) -....PC-457A_6 P0R Pressure 6ig5 Ox T~p ] SOPS (Discrete)
P0-4576_B Ujhnalon 01 P-It 1 ..ALS-B (Dscerete) 
----P0.-4570_B P2R Prenaure Law Ox Tdp l, 5P (Disat-ete)
P0-457DB P2R Pressure Law-Law SI ...(Disarete) 
--- -P0-93MAB chat Presa Hig6 SI, Ph. A lain -1 SP (Discrete(P0-93056-Cent Press High-High P68 laIrn Chat Spray' Ohaline  (Discrete)
SP PC-457PB P20 Pressure High POOH NS (Diacrete)
FM-4386B Leap 3 Ox Catlant Flaw IO PM-lGB~ep4Oxeelat~la ISOL (4-20 tmA)UY-PSODDiVB PPS Ill Chnassa B Out at Seraire -.I I LIy-PS3ADIWB PPS Ill Chassis B Twouhie (Distrete)
I UtY-P03BDrB PPO Ill Chances B Channel Bypass (Disrwete)
UYr-PS3CBIB PPB Ill Chassis B Failure (iskarete)
Leap Pulse B (Discre te)" y N lIt Process Protection System Interface Requirements Specification Revision:
9 Page 39 of 78 Figure 1-13, continued S INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP +Tlion (s7) pT- 0 14od 04,n00 PoSuo Loop 4 P-0 )0.BA 414 (4-00 mA0) R0 V2.RU A4 TPW(1)LToI1 0-461 04000 Tb, (B) 1-401 (4-20 0,3)Stmroo ProooLop 2 TIoo ($10) P0-526 p1-503004043 (4-20,1n3) 01tm4,e Proootoopl 3 10444(Oil) pT-SIB (4-200 t) V 0101 b 1  U-IB000.030l4B Triono (0 12) LI-SIB -58(B3* VI (4-20,1n3 T,4con (013) T1026 014140 LI-SOB NODS(B1)T4co4 (0 12) IT-BIB (40,03 U-SO (B3) 04004 S 2100 41 )(4-20,03m) 103041d ,,+1T4o, (SB)  (4-20,103))
Trion (SB0) 1T-401 TrOon ($10) PT-5340 p3seaLeP~(4-20,r03) 1T00 (SIB2) PT-B18 S400A01 Lev~1eT 01L (4-20o 03)Tdo. ($12) IT-SI5 032a bo (4-20,r03)
T4 ($S3 LT-528 (4010 (4-2o0r0)Td403$4)I2 LT-SI53O8oo (4-2or03) 
-Tdo, ($15) LT-540 (4-20 I'A)AL~lA(sS)
T-457 (4.201103) 
.(4-20,1r1)-twil, (4-00 IA)P14-526_1 Loop 2034team0e 010003(M44 10 Loota 4 e'J~ 03100 04-510101 B/ 014 0IeveI (4-20 rIA)(4-20 rnA)((-208 10/G3)ve (4-20 IA)(4-20 o03)(4-20 rA)F4-4061_I10040o4100Row 2p 2 202-420 NOA2 (4-20 IA) I PSI-4IB..
10300o110r04F4w00Loop 43 NOO VB) .(4-00 IeA)FM14-4B I 401 R ,1o0n10014oo414 o 0-116(N2)MCR MCR MCR MCR ,1 lt ,,-o.2400 +,, 11BT00F-i I-F-i F-L401_C0 P403_000 HFl-iI-012lO0 01210000 Isso2Bs 101000s-if--H-if H-f-......42 -1 F-OB00 LI F I perr014s10o IoIM P,410oITo,.
1 r)Se I Prot Set Ill H-MI SSO13oA3A2 PROT SET I)( ALS 033Comp03or A1S0 "04 RKVMO.U, m Peip heral 00-I0TAOU04UTLMAINTENANCE Sic eie (04014000411144 WORKSTAT(ON KVM Switch, HM) peripherals shown1 on Figure 1-IA Process Protection System Interface Requirements Specification Revision:
9 page 40 of 78 Figure "1-14 Replacement PPS Architecture 
-Set II! Safety-Related Tricon Main Chassis PPS Protection Set III One-Way Tricnox ET2Data Link DTaricnkx AEPORT (Typ of 2) .To PPC Gateway (Typ of 2) AGGREGATOR Tricanex NET2 TAP B Data Link)'rppo2) )Typ o f 2) Workstation tL II t lt (5PT47 PZR Pressure (D'nTA) I (05) T-457 (4-20 nmA)Prom (ALS) TE-430B Loop 3 DOTTA Tcold-1 -.(4-20 mA)Prom (ALS) TE-431B Loop 3 DTTA Tcold-2 (4-20 mA)Prom (ALS) TE-430A Loop 3 D'TTA Thot-lA*(4-20 mA)Prom (ALS) TE-430C Loop 3 D'TFA Thot-1 B 1 (4-20 mAv)From (ALS) TE--431A Loop 3 DTT'A (4-20 mA)Pmom (ALS) TE-431C Loop 3 DOTrA Thot-20 (4-20 mA) -Prom (ALS) TS-432A Loop 3 D'TFA Thot-3A , (4-20 mA)Prom (ALS) TE-432C Loop 3 DTTA Tthot-30 .(4-20 mnA)Lower Flux*NE-43B , (0.10 VDC)*NE-.43A Upper Ftuxoo (0-10 VDC)PZR Levet ($9) LT-461 (420mA S/G 2 Stmiine Press (010) PT-526 (4-20 mA)0/5 3 Strntine Press (511) PT-536 (42 A S/G 1 Level (012) LT-518 (42 *A 0/5 2 Level (013) T-520 (4-20 mA)S/G 3 Level (014) LT-538 (42 *nA 0/G54 Level (010) LT-548 (42 *A (4-20 mA)(S)P-0A Loop 4 W/ide Range (4-20 msA) iw.TRICON MAIN CHASSIS IS* 0-10 VDC Powered Input from NIS TTTI Coinmmuniation Links 000 Cope Process Protection System Interface Requirements Specification Revision:
9 Page 41 of 78 Figure 1-15 Replacement PPS Architecture-Set Ill Safety-Related Tricon Primary RXM Chassis PPS Protection Set III LP3J lilA005D'nA Loop 3 Ch. DOS Switch DTTA DOS([iscrete) noD Loop 3 COh. 003 Switch 1 I_'T' oOS (Discrete)
Wide Rangpe Pce~sore*
Loop 4 COh. 00S Switch p403_0 0 (Discrete) 472402 de Rar~ePresureLcop 4ChS OS Switch P05 Level Ch. D05 Switch L45I_00S (Discrete)
Loop 2 Steomlitne Pressuree CO, 005 Swetchroi P526_OOS(Disceret)
Loop 3 Steamline Presvre CO. DOS Switch Sf3 1 Level CO. DOS Switch I L518 005 (Discrete)
Sf3 2 Level CO. 005 Switch L528 005 (Disorete) 513G3 Levet CO. 005 Scotch I L535 003 (Discete)SitS 4 Level Cit. 005 Switch L5_O 005 (Dikcrete) 
'Presure Low (R0R 8702 Irloercck)
Trip Stoles (Discrete)
Pcesocre High (LTOPS) Trip Stotum PC403D (Discrete)
TSt431G Overpower Delta-T Trip Trip Stales1 (Discrete)
TSt43tOC Ovesemp Dclta-T Trip Trip States (Discrete)
TS/4320 Low-Low Tevg P-12 Trip Stores l (Discrete)
TC-423G Low Tovo Feodwriaer (ste Trip Status 1 (Doscrte)LSI4SIA P0R Lovet Higrh Trip Stotus (Diorreea)
PS526A Sf0 2 Low Sotl~ine Press St1& Starnes Isle Titp Status I PSiS506 3/G02 St eoalive Press Hi Negatve Rote Sreareirr tsdttion Trip States (Discrete)
P S/5AS$103 Low Stretue Pres SI & Stmres sItn Trip States (Discrete) piS/36C Sf0 3 St eamline Pres Hr Negative Rate Steomenve boototicn Trip States (Discrete)
L3SI1A Sf0 1 TreS Trip, FP lIsl, P-t4 Trip States (Discrete)
L8/518B Sf0 t Lois-Low Level Trip. AFW Puep Stort Toip Status 1 (Disote)Sf3 2 HIt-Hi TUch Trip. Feedowter Isle, P-14 Trip States L~tS2SA(Discrte)
LSI528B Sf0 2 Low-Low Level Trip, HEW Pump Stort Trip Status , LS/538ASfG32 Hi-Hr TutO Trip, Feedwastet Isle, P-t4 Trip Status ](Discete)LSI53SB 313 3 Low-Low Loete Trip. AFW Puop 3tar Trip States (Discrete) 1 LSI548ASf34 Hr-Hr Tor Trip, Feedwoter Isle, P-t4 Trip Status (Discrete)
L515445 Sf3G4 Low-Low Level Trip. AW Pump Stars Trip States 1 (Discrete)
SFJXLI AMalog Loop onpus Pomer Supply Forume (Discrete)
Pi_FAL17 Antalog Loop (npvs Power Sup plp Forum _ (Discrete)
Loop (opus power Supplit Pailure RelaopI PHIL 17(Discete)
_FPIL LIT Discrete Loop Onpus Power siopgrip Foillow  PC-4020 Pressure Low (RHR 8702 lnterlook)
TRI CON PRI MARY RXM CHASSIS (Discrete)
P0-40D Prescore FHs ILTOPS)(Diowete)TC-43tG Overpower 
~oI-T Trip (Disorete)
TC-.3t0 Overteme Delta-T Trio (Discrete)
T-4322D Low-Low Taco P-t2 (Discrete)
TC-4320 Low Toys Feediwater Isis (Discrete)
LC-461A POR Level High Re Trip p0-5200 Sf3 2 Low Stmlite Press SI & Stmlive Irsn Dioscrete)
P0-526C Sf3 2 otoamliee Press Hr Negotive Rote Sboomicre Isloato n (Discrete)
P0-536A Sf3 3 Low Strelive Press 5) & S0011ne Irsl (Disowe)p0-5360 Sf023 Steamlne Pcess Hr Negatos Rote Steomelte Iatuloc n -(Discrete)
L0-5tSA Sf3 1 Hi-Hi Outb Trip, Feeriwotar Isdn. P-t4 1 (Discrete)
L0-518BSIG t Low-LcrvLevelTiori FW PueroStart (Discete)L0-528tA S1G02 Hi-Hr Turbt Trip. Feedwot er Isle. P-t4 (Discrete)
LO-525B 0/G02 Low-Low Level Trip. AFW Pump Staos (Disortae)
LC-535A Sf0 301-Hi Turb Trio. Feedowlt oe.sn P-t4 (Disorete)
L0-5338 Sf0 3 Low-Low Level Trip, AMW Pump Start (Doworte)LD-5480 010 4 Hi-HI Turb Trip, Peedowler Isle, P-14 (DOorete)LC-,548B Sf3 4 Low-Low Level Trip. HOW 50rt5 1 (Discrete)
RNSIA SOPS SOPS SOPS SOPS SOPS SSPS OSPO SSPS SOPS SOPS SOPS 8SPO-4P p023.POS7S P030.LZ. 4LP151,rsvicrs 
~..olts ..Un F~be f Process Protection System Interface Requirements Specification Revision:
9 Page 42 of 78 Figure 1-16 Replacement PPS Architecture 
-Set III Non-Safety-Related Tricon Chassis PPS Protection Set III Q Cororocrnrcation Links Fiber TM-432F Tavg (4-25 mA)TM-431G Ocertenup Sorpoint*-D PCS, MCR-D, MCR Overpower Delta-T Interlock CA: Macual Trip Switch TSI431H Tlip Switch TSI431D Trip Switch (Discrete)
Overtenrp Delta-T Irrtertock C3 Manual Trip Switch TRICON REMOTE RXM CHASSIS--(4-20rrrA)
TM-43"IF Overpower Setpoint (Discrete)
PS2N FAUL1 (......
PSSN FAIL 17 Class IlAnalog Power Supplh Failure--(Discrete)
PS3NFAI 17Isolator Power Supply Pailure Relay P -N.PI-1 (Discrete)
PS6N FAIL_17Isolator Power Supply Failare Relay l PSONFAI 17(Discrete)
(4-20 rrA)TM-431E Delta-T (Discrete)
TC-431D Overterop Delta-T Irtenlock C3 ONR (Discrete)RNA PC-52OB S/GD O teawline Low Pressure Alerm (Discrete)MA PC-538B Sl/G 3 Stearoline Low Pressure Alaoo)Discrete)MA LY-518Hi SI'G Law-Low Leuel TTD trimer Actuated (Discrete)
UY-PS3ATRICON Protection Set IIt Trouble Alarm -P A (Discrete)MA UY-PS3BTRICON Protection Set lit Channel BYP Alarmno A (Discrete)MA UY-PS3C.TRICDN Protectian Set RTD Pollute Alano A (Disorete)MA TY-43t TRICDN Protection Set III DTT'A RTD Failure Alaoo A (Discrete)MA (Discrete)
PC--403B Pressure Hlgh RHR Not Isolated Alaror (Discrete)MAO* Keyboard* Video Display* Mouse* Touchscreen
* Printer Process Protection System Interface Requirements Specification Revision:
9 Page 43 of 78 Figure 1-17 Repiacement PPS Architecture 
-Set IV ALS-A PPS Protection Set IV RS1405 TAB Doss Urns Disconnected whec not in use -//r , RS!422 Da kt ir 02.. 1 TX Only PPC Gatewaoy R01422 Data Linko T)B2 S TX Only Worksotation f ll ,,4, I1 T-40 Loep 4DTTA Tr8d-1 15-408(200 0)TE.4-OA Loop 4 DnrA "rn01-IA (2000Q)TE-441A 1oop 4 DflA Thrt-2A (2000Q)TO-442A Lo0004 DTTA Thet-3A TE-454 PZR Vapor Tamp (2000n)(SI) PT-474 PZR prescore (4-20 es,)(02) PT-034 Conteirnment Press (4.20 rcA)PC-.474A_FB_LSMA PC-474A PZR Pressore Loon LOM A_ (Discrete)
P C-474CF BLSM.A pC-474C PAR Pressure High LSM A (Discrete)
I P0-4740_FB LSMA P0-4740 PZI( Pressure Los~o-Lw LOM A (Discrete)
PC-934A..BLSM.A' PC-g34A C00n1 Press High SI, Ph. A Isin LSM A (Discrete) 
'PC-934BFB L0M A p0-934B Coot Press Hish-High Ph B les.n Ctet Sprey. Otelne Isir LSM A---(DiSCrete)
PC-474BFB LSM._A pC-474B PZR Prescore High -PORVILSM A PC-4?4A FBypJA PC-474A P08 Pressure Lrow Bypass A (Discrete) pC-4740 PZR Prescore Higth Bypass A (Disrte)
P2R Pressure Low-Loon Bypass A PC-74P8BpA(Discrete)
PD-934AFBBypA PC-g34A Ctot Press High St. Ph. A Isto Bypass A (DLScree Pc-gg4BBByp A P0-934B Coot Press Higtr-Hi4h FOB Isir. Ctnt Spray. Sozntine Isir Bypass A PC-02B...P~ypA(Discrete) pC-47B FB yp. AP0-474B PZR Pressure High -PORV Bypass A PC44j~p~(Discrete) 
"// pS3FAILIVA ALD-A Chassis Pooner Scypty I Fa4-re (e-48VA)(Discete)6SFAILIVA ALS-A Cthssis Power Supply 2 Failure (04081B (Discrete)
P54Pt AILIVA Analog rnpot Loop Peower Supply 2 Failure (Discrete) 
'PS2FAIL IVA AalS ptaLo Wowerg Supply 2 Faiture (Discrete)
PS2FAIL IVA ALS Contaict Wayting Suppy 2 Pature (Disre)PS IV TAB..StotusA PS P/TAB Sonitta States (Discrete)
PS IVAlar Cler._APS IV Alrm Cloor pP/aelrA(Discrete) 
=I ALS-A TE-445B DTrA Loop 4 Tootd-1 P I Vu ./(4-20 reA) I-P VT~o TE-44DA DTrALoop 4 Thot-IA ptmo (4-20 msA) PIVTco TS-44tA DITA Loop 4 meot-OHP VAio (4-20 rnA) P VTSn TE-4-IDA DTrA Loop 4 llcI-3APDIsbr (4-2D erA) .PSITdo 18-454 P28 Vapor TerepessatrePSpsie (4-20 rnA) PIVTcn PC-474AA PZ8 Prescore Low PRx T rip gp (Discrete) -SP PC-474C A P2R Pressure sigh 85 Trip (Distaste) -SP pC-474DA P2R Prescore Low-Low SI SP (Discrete) SP PC-934AA Ctmt Press Highr SI. Ph. A Ishi (Discrete) -l SP Pc-924B Ah Coot Press High-High Ph B Istn, Coot Spray, Soolire Isis (Discreta) SPg P0-4748Bh PZR Pressure High -PORV BSS (Discrete) iRNA i I'1 (UY01-PdS4DOP/VA ppg IV Chassis A Out ofSencice 
-UY-pS4ADIP/A PPS P/ Chassis A Trouble-~ (Dioscata)A LUy-PD4 B_SIV.A FF01 IVtChssis A FhannuelBps (Discrete)
Loep Puose A (Disorete)
,," I Process Protection System Interface Requirements Specification Figure 1-18 Replacemea Revision:
9 Page 44 of 78 nft PPS Architecture 
-Set IV ALS-B and Isolation Devices PPS Protection Set IV RS1485 TAB Data Unk Z Dishannected when eat in ace Si 58/422 Data Link TXBt tO nlyPPC Gateway 53/422 Data LUnk TXB2 I iX Only E arwan t II'It 01445Loop 4 DTTA Toed-2 (2DD 0)TB-44(DC Laay 4 DTTA Thot-IS}1 (DD0 0)TB-441C Leap 4 DTTA Thot-2B l (2DD0 )TS-442C Lonp 4 DTrA That3D (2D0 0)(SI) PT-474 P5Pcu (4-DD wA)(SD) T-SMonetainwent Pwess (4-GD emA)PC-.474A 7ZR Paeaceae Law LDM B PC-44&FS1DM(Disrewte)
PC.-44C FBLSMBP0-4740 PZR Pressuwe High LDM S PC-44C~tDMB(Discaete)
P0-475 PS GM SPC-474D PZR Pnessure Law-Lea 1DMB PC-47DFBSMB(Discrete)
PC-34 FBLS BPC-O04A Chat pwees High DI. Ph- A aint LDM S PC-S34PSLDMH(Discnete)
PC94 BLMB P-9BC ha ec ih-ihP t , Chtm Syny Da/a. A~ls a LDM S PC-SMSBLDMS(Discrete)
PC-445PSDM5-454 P2R Panesuwe Sigh -PORV LDM S PC.A4A Bp._8PC.-474A PZR Prnesune Law Sypase S PC-47A~ypS(Discrete)
PC-474_BypBP0-474C PZR Panessur High Bypacs S PC-474~yp.S(Dlaseete)
PC,-4745 PZR Panesune Law-Law SBypass S P0-474D BypB (DisCreta)
PC-934_BypBPC-93MA Chat Pwaes High DI, Ph. A asla Sypacs S PC-93A~yy5(Discrete)
PC-934B Chat Panes High-Sig h Ph 5 eIin, Chat Syray, Sha/lne tain Byypaas S PC-934B ypS B (Disceteg PC-A4BSpBP0-474B PZR Pressuew High m-PORV Sypass S P0-745(Discree)
/ 3FA/L IVB ALS-A ChacaisPewerhaul I 1Fature l.48VAt)Diaawete)
PDS1PALJ _VS ALDACaain c nutLo PoweehSayaln2 Failune 451 f Pt4P.0IV ALan IVe B .SanIptLo owrSpl alr ALS-S 4 10-441B ClrA LanIa 4 Tnete-2 (4-2D mAn)T0-4400 DTTA Looa 4 That-IS (4-GD atA)T0-,4410C DTIA Leonn4 Thet-2B-POSaI Tcne PD IV Tdcne (4-20 wA)TE-4.42C CDTrA Leap 4 Thot-GS (4-GD wnA) -....PC.-474.&S P25 prnessue Ha Thy DDSPS (Discrete) pC-474C_5 P25 Pressure High Re Tsp Di O SPO (Discrete) pC-474C..
p2R prescure Law-Law Dl -..(Diecetew)
PC-5M4A_ Chat Press High Sl, PRa/rip -iaSP (Diecaeta)
PC-9MtS- Chat Presa High-High Ph S starn Chat Sprany Sha/ne in tale SasP (Cisneeta)
PC-4745_B P2R pressure High -PORV (Discaeta)
UY-PS4D DIV SBPPDShaChaccicS Outoaf ernane (I (Discrete)
UY-PS4A DtVB PPD ha Chaenle S Trouble*ilRNS'a- i (Disneete) tDY-PD4tCDIV PPD tV Chuasse S Chunnelt Bypass (Discrete)
UY7-PD4O DIMS PPD IA Chassis S Failure Looe pu/ce S (Disreaate) lit Process Protection System Interface Requirements Specification Revision:
9 Page 45 of 78 Figure 1-18, continued I INDICATIONS DIRECT FROM TRANSMITTER INPUT LOOP Trons (09) PT-425 Woo Rango P0s0u0w 1-p3 l P1-405 (V42). 0RFD5 (VB4). RVLIS (P083)(4-2 0 ovA)TrPn,n ($5) PT-SIB Loop I 55000m P400u040 PI-516 (4B3)(4.20 oS Pr54(44 T~con ($5) 1T-047 Loop 4Smle) Prssr RO 44 (4-20 evA)lrion (80) IT-SOP 50521oLI -SOP (405). E0F20 (484)(4-20 sA)Trion (57) 11-537 5101-n) LI-527 (403), ERFOS (484))4-20 mS)Tlcns (04) LT-5374iP LI-547 (4B4), ERFD25(404)
(4-20 mA)Tti0on ($4) PT-547 (0 P1-524470/))
4RD V4 ((4-20 esA I(4-/00 S1 T-3 4")0DEV)CE (4-2-24 nB1))Tdvon (S3) 1T-527 oo 0)0 boo)ran Prsur so8or-521 
$102op 1 -Sevrln (4-20 ToO) 1 )(4-02 evA)* D NC Tflns (57) IT-OS? L~ 3)0 Lovo ) eie rs~ P -M- 5546_ 9op )03e rioo Prsue* Or#csw (4-20 soS) II(4-22 mAO)TSs 501154 05 Love)l LM-547 0)041-e Lve)Tln(5LT57 (4-20 on) *(4-420 nAvo(FVC, 01-0)0(85)
P5-474 P4-2 Pmsv) P*- 4DPEVICErS 7147(4-04)
Pl ooA w o) 254 AMOO.P2 (4-20 on*) (4-20 on)AW/ (t o-7 BonR Procour Love P 8-405_1 Loop 4053ur Pr-474 to2) P1-0 (402)ur E ontrS (404) Tos(0P-20 (4-20 mA) (4-22 on)82 f k I I ,, ,, O +24 VDC LP4 2510003 F-I I-......0 HII-H-L54P005 1-] H P405AoS -t H-1-2,_003 -tH LS4P 00-I H-1547_.0 -t+1+Protection set[voos K( PermLss]vetoMAS ALSA' (I .....d'Vh, ntt 1 Prot Setl IV Prot Set] IV ALS'A'* RS -422 Data Lln01TXB PROT SETI(VALE Mis~vro~po..s KVM HMI Peripheral
...-4......WOoKSTATAoMA)NTENANCE 21 Switch I-I Devices I A1-00 "01 (~~nncewono~s)
COMPUTER ALO*0 02" RS-oo2 Dose U)0T502 KVM Switch, HM) poripherals shows on Fi)gure 1-21 Process Protection System Interface Requirements Specification Revision:
9 Page 46 of 78 Figure 1-19 Replacement PPS Architecture 
-Set IV Safety-Related Tricon Main Chassis PPS Protection Set IV One-Way Tricanex NET2 1 Data Link Data Link A [ PORT (Tp 12) To PPC Gateway~Typ of 2) " /AGGREGATOR Tticanex NET2 TAP B Data Link (Typ 0f12) (ryp of 2) c Workstation t II (Si) PT-474 Prom (ALS) TE-440B Prom (ALS) TE-441 B From (ALS) TE-440A Prom (ALS( TE-440C Prom (ALS) TS-441A Prom (ALS) TE-441C From (ALS) TE-442A Prom (ALS) TE-442C*NE-44B*NE-44A (S3) PT-5I6 (S4) PT-54e (S5) LT-517 (SB) LT-527 (S7) LT-537 (S8) LT-547 (S9) PT-405 (S10) PT-405A Prom (ALS) TS-454 PZR Pressure (DiTA)(4-20 mA)Loop 4 DTIA Tcotd-1 (4-20 mA)Loop 4 DrrA Tcold-2 (4-20 mA) -Loop 4 DTTA Thot-IA , (4-20 mA)Loop 4 DO'A Thot-lB (4-20 mA)Loop 4 DT/'A Thot-2A (4-20 mA)Loop 4 DTTA Ttrot-2B D (4-20 mA)Loop 4 DTTA Thot-3A =(4-20 mA)Loop 4 DITA Trhot-3B (4-20 mA)(Lower Plan (0-10 VDC)Upper Plaxn ](0-10 VDC)SIG 2 Stmline Preon (4-20 mA)5IG04 Stmline press (4-20 mA)GIG I Level (4-20 mA)S/G 2 Level (4-20 mA)SIG 3 Level (4-20 mA)GIG 4 Level (4-20 mA)Wide Range Pressure Loop 3 (4-20 nmA)Wide Range Preossure Loop 4 (4-20 mA)PZR Vapor Temp *(4-20 mA(TRICON MAIN CHASSIS IS* 0-10 VDC Powered Input from NIS Communication LUnks Copper Process Protection System Interface Requirements Specification Revision:
9 Page 47 of 78 Figure 1-20 Replacement PPS Architecture 
-Set IV Safety-Related Tricon Primary RXM Chassis PPS Protection Set IV t ? C catln ....CppeLinksTRIOCON PRIMARY~RXM Ib CHASSIS 28 POR VaoroeperatCre Oh.00 Swit u/h T4h4_OO80 LP4 DUTAOOS LP4JI"D-D00O P40500O3 P403AjOO3 p54600OS L527.003O"L537_003~~L547OO pC435A LW H I rir1rrurero 
-(Diso.rte) lOisrerte)
S/TA Loop A Oh. 003 Soirrh (Dicarete)
TOO Leep 4 Oh. 003 Soird, (Disreere)
Side Raree Pressure Leon AC/v 003 3w/ru/n P0-4305 Pressure High {1.TOPOI (Dis-erre)
TO-4AI G Overpoweor Oelra,-T Trip (Disorete)
Wide R/anre Pressure oeee A Chn. 003 Swirtrh Discerete)
TC-4-41C Ouroeme DrIta-T Trio Loeee 1 teamlive Pressure Ch. 003 Sri/rch (Disreete) 10-4420 Lowi-LereTeug P-tO2 (Disreete)
TC-442G Low Tavs Peru/waler Isir Leer 4 Sreaorfee Pressure Oh. 003 Sri//ea (iscuretle) 3/0 &#xb6; Leave0 Our/Sdrc (Disreere) 3/0 2 Level 003Se//v/n (Disretle) 3/3 4 Level 003 Sari/dr (Discreete)
Pressure Lure (1/HR SP0t lnter/ior)
Trip Stausi (Discret/e)
P0-516A 3102 Lor Sot/rie Press 31I 35S0n/re Isir (Disreter)
P0-316C03/02 Sroaeal 00 Press lii Regal/srve/ae Steomirne lssloaleon (Disreter)
PC-S4ASGA3/0 Lerwtuhrrle pressS 3& Sorliro Islo R/NASA 33P3 33P3 33P3 SOPS SDPS S3SPS S3P3 SSP3 SSps 33P3 33P3 33P3 SSPS 3SP3 (Diocrete)
P0-5460C3103 
/euemline press Hi Nega/re Rare Steare/re Issla/or (Disreere)
LC-S17A 31G01 HI-Hi Tur/n Trip, Fendreater lIsn. P-14 (Diserete)
P0435D pressure H/Jh ILTOPS) Trip 3/a/us (Disretre)
T13441G Ounipseurn Dnlsa-T Trip 3/a/usi (Disrete/)
T3144/C Ouertemp Delra-T Trip3Statas (Discret/e)
TS/4423 Lows-Lowu Taog P-12 Trip 3/a/us (Diserete)
TS/442G Lore Tape Pererwa/er salr Trip  TS/4420(Disreter)
PS/5/64 310 2 Leew 3/relie press Trip 30/tus (Discre/e)
PS/516C 3102 Steareline Press HI Regetive 1/are Trip 3/a/us j (Disceret)
P3/34/s/ 310 3 Lure stmrine Press Trip 30/tus (Discrete)
P31346 /03 3/Searnline Press Hi Rrgeanur Rare TripS/a/so (Disceret)
LS/5t 7A 3/01 HI-Hi P-14 Trip L313/PA(Discrete)
LS/5I7B 310 1 Lere-Lew Level Trp 30/tus (Disretre) 3/0 2 Hi-Hi P-/4 Trip 3/a/uso (Disreere)
P5/527B 313 2 Lerw-Lee Level Trip 3/a/usoJ (Disreere) 3103 3/H4-4 P-/A4 Trip 3/a/us L31337A(Oree 310 3 Lreu-/ow Level Trip S/a/us L31537B (Dsisrere)
J L31347A 3/0 4 H1-Hi P-t4 Trip 3/a/us St/04 Lew-Lsaw Level Trip S/a/us L315A76 (Disrete/e p2..PS2_A/L_18/
Analeg Lrep Input Puoeer Supply Feilure Relay l Mnalos Leap lnput Puwer supp~ly Failure Relay PS7SFA/L )8 Disret/e) l PS333.FAILJ.1 Diserete Leop lrpu/ Poerso suppip/ Palfure Relay I (Disreter)
P36SF/i/L t8 Disuretn Lssp Input Pweree Supply Frilurn 1/clap 1 2 Dl P01/ /8Less ef Peower 0o D/i/ial 10nput Card (Discrete)
LC-5/PB 3/0 1 Leow-Leer Level Trip, AFW Pump S/as (Disceree)
LC-82PA 310 2 HI-Hi Tatb Trip, Feedwea/er (sir, P-lA4 (Discuete)
LC-52P8 310 2 Law-Low Level Trip. APW Pump 3/art LO-537A 310 3 Hi-Hi Tvu/n Trip, Fededater Ilonr P-14 (Dioce H)LC-53PB S/G03 Lore-Lore Level Trip, AFW Pump 304rt (Devcrte)LC-547A 310 4 Hi-Hi Tutu Trip. FeedweatertrIof, P-/4 (Discrete)
LC-5478312G4 Law-Leer Level Trip. APW Pump 3tat5 I IDiuscrete it I-nks F/net Process Protection System Interface Requirements Specification Revision:
9 Page 48 of 78 Figure 1-21 Replacement PPS Architecture 
-Set IV Non-Safety-Related Tricon Chassis PPS Protection Set IV o ..... t t t Links Fiber TM-442F Tayg I 14ILUN REMOTE RXM (4-20 nmA)TM-441 G Cverternp Setpoint TS/441H Overpowrer Delta-T Interlck 04 Manual Trip Swcich (Discrete)
TS/441D Overtenmp Delta-T Interlock C3 Manual Trip Swritch (l~iscrete)
PSOFI_8 Class nI Ano Powrer Supply Failure Relay _P2 _FAL1 (Discrete)
P85N_FAIL_18 Class II AnaleS Feorer Supply Falure Relay (Discrete)
PS3NFAIL_18 Isolator Power Supply Failure Relay .(Discrete)
PORNFAIISIsolator Power Supply Failure Relay PS6NFDILcteta.
(4-20 rnA)3 (4-20 rmA)TM-441E Delta-T (4-20 renA)TM-454A PZR Vaper Terrr (4-20 renA)TO-441 H Overpowuer Delta-T Interdool 04MCR, P0S5-n-MCR-D' MCR-p.- MCR, PC5RNARA-eMAS (Discrete)
TC-441D Overternrp Delta-T Interlocks 03 (Discrete)
PC-SIRS S/G t Steanrnlne Lown Pressure Alarrr (Disereta)
C-54BS/ SemlnMAwSesue lr (Discrete)
LY-517H DIG Leaw-Leaw Level TTD Tierer Actuated (DIscrete)
A UY-PS4ATRICON Frotectiun Set IV Trouble Alarrr (DIscrete)MA UY-PS4BTRICDN Protection Set IV Channel BY'P Alarmo (Discrete)MA UY-PO4C TRICON Protection Set RTD Failure Alarrrr dMA (Discrete)MA t= AS (Discrete)
PC-405B Pressure High RHR Not lsolated Alanrr (DIscrete)
MAS PROT SET IV TRICON MAINTENANCE WORKSTATION COMPUTER Tricon C WonderWare Data Link.. Set IV ] IProt Set IVKVM HMl Peripheral Prot Set IV ALS SwthDeie MWO Cortputer wth eie*Keyboard* Vtdeo Display SMouse a Touchscreen
* Prdnter Process Protection System Interface Requirements Specification Figure 1-22 Revision:
9 Page 49 of 78 ent PPS Non-Safety-Related Communications Architecture 55-522 Ce, *0ro, M.S.----
A")'5o i.5 ALS "APmlS A "S8..... P rALSWB.....-, ProSS.)V ALS "W From P'n S..I (Typ 05 2)* Mona T Ma,.P I Ta ALS B.s (TAR)PhyMca dmo~ctd when rol Anu (Ty 50. ,ALS " wA" AL)) l5t),\ /Prot Set I Tow RS-,a85 I0 OeA tT A".05 ALS T)'Ft"iIU LLJJIIUI1
____ ._Prot Se.t 1 c,,.))Remstu PXM Legend: Muir-Mode Optca Fibe"r- --.. RS,-422JRS,-485 Seuial or l00BaseT Copper o f lf.......
aomA Aunao CopperConnecl~oo Process Protection System Revision:
9 Interface Requirements Specification Page 50 of 78 2 Interface Requirements This section specifies the requirements imposed on the systems, subsystems, configuration items, or other system components to achieve required interfaces among these entities.2.1 Process Interface Requirements The I/O List [Appendix 4.1 through Appendix 4.4] describes process inputs and outputs for the PPS replacement project. The I/O list contains the following information for each protection set. As noted below, some I/O list information is outside the scope of this interface specification.
2.1.1 I/O Power Supplies 1. Separate power supplies will be provided by PG&E for Triconex analog and digital I/O per the Triconex qualification.
: 2. All Tricon discrete inputs and outputs will be powered by PG&E in accordance with the requirements provided in the l/O list.3. All ALS discrete inputs and outputs will be wetted by 48 Vdc supplied by PG&E.4. The Pressurizer pressure channels are shared among the ALS, Tricon, and the control system, via qualified isolator modules, and will be powered by the Tricon ETP as shown in Figure 2-3.5. Deleted 6. All 4-20 mA analog input signals are powered from power supplies located within the PPS cabinets.
The 0-10 VDC analog signals from the Nuclear Instrumentation System (NIS) are powered by the NIS.7. PG&E will provide analog loop power supplies.
Analog input loop power supply voltage should not exceed 40 Vdc, and may be as low as 24 Vdc based on the following considerations and assumptions:
: a. Rosemount 1154 and 1154 Series H 1) Max qualified power supply voltage: 45 Vdc 2) Max Design loop resistance at 45 Vdc input: 1575 ohms 3) Mmn Design loop resistance at 45 Vdc input: 500 ohms 4) Max Design loop resistance at 24 Vdc input: Approx. 700 Ohms 5) Min Design loop resistance at 24 Vdc input: 0 Ohms b. Rosemount 1153 Series B&D Output Code P 1) Max qualified power supply voltage: 40 Vdc 2) Max Design loop resistance at 40 Vdc input: 1325 ohms 3) Mmn Design loop resistance at 40 Vdc input: 500 ohms 4) Max Design loop resistance at 24 Vdc input: Approx. 600 Ohms 5) Min Design loop resistance at 24 Vdc input: 0 Ohms c. Rosemount 1153 Series B&D Output Code R 1) Max qualified power supply voltage: 45 Vdc 2) Max Design loop resistance at 45 Vdc input: 1575 ohms 3) Min Design loop resistance at 45 Vdc input: 500 Ohms Process Protection System Revision:
9 Interface Requirements Specification Page 51 of 78 4) Max Design Loop Resistance at 24 Vdc input: Approx. 700 ohms 5) Min Design Loop Resistance at 24 Vdc input: 0 ohms d. Barton 763 max power supply voltage: 50 Vdc e. Barton 763 Max loop resistance at 40 Vdc input: Approx. 1250'ohms f. Barton 763 Mmn loop resistance at 40 Vdc input: Approx. 190 ohms g. Triconex 3805N Analog Output module OVP: 42.5 Vdc h. ALS input resistance is 200 ohms [Figure 2-2] with both "A" and "B" 302 connected in series (i.e., Rs = 100 ohms).i.Triconex 9792-610N Reg. Guide 1.180 FTP Approx. input resistance:
: 1) When powered from the FTP (max 48 Vdc supply): (250 + 1/(1/250 +1/3300)) = 482 ohms ~500 ohms)2) When externally powered: 250 ohms (i.e., temperature signals from the ALS)j. Resistances of external loop devices are (PG&E scope): 1) Isolator input 4-20 mA into 100 ohms (estimated)
: 2) Westinghouse VX-252 indicator:
5 ohms (including estimated wire resistance)
: 3) ERFDS: Loop-Specific (Usually 250 ohms or 50 ohms)4) RVLIS: 250 ohms k. ALS 4-20 mA analog outputs are powered by the ALS. Therefore,-
temperature inputs to the Tricon shall not use the Positive Temperature Coefficient (PTC) thermistor for loop overcurrent protection and the input resistance for Tricon temperature inputs is 250 ohms.8. Tricon Analog Output Power Supply a. Analog outputs in the safety-related Triconex Main Chassis will be powered by redundant 24 Vdc power supplies furnished by PG&E.b. Analog outputs in the non-safety related Triconex Remote RXM chassis will be powered by redundant24 Vdc power supplies furnished by PG&E and mounted in the rack housing the RRXM chassis.c. Deleted.2.1.2 Analog Inputs Figure 2-2, Figure 2-3, and Figure 2-4 illustrate typical PPS analog input signal wiring[1.4.5.6, 1.4.5.7]: 1. PT-455 signal shared among Tricon (DTT-IA functions), ALSA, ALS-B and an isolation device 2. LT-459 Signal shared among Tricon, ControBad ad an  device 3. PT-5OS signal shared among the Tricon, and an isolation device 4. RCS Temperature signals are conditioned by ALS-A and ALS-B, respectively before they are input to the Tricon. Example wiring for these signals is shown in Figure 2-3.5. Tricon Al card type 3721N shall be configured for 14-bit resolution, unipolar.These cards are used for all 4-20 mA analog inputs to the PPS*6. Tricon Al cards 3703E (where used) and 3703EN shall be selected for 0-10 Vdc input, fail downscale.
These cards are used for Nuclear Instrumentation (NI)inputs to the PPS.
Process Protection System Revision:
9 Interface Requirements Specification Page 52 of 78 7. Signals from redundant field devices shall be processed on separate input boards (Not applicable to ALS).2.1.3 Discrete Inputs Signals from redundant field devices shall be processed on separate input boards (Not applicable to ALS).2.1.4 Discrete Outputs Figure 2-5 and Figure 2-6 illustrate typical ALS discrete output signal wiring that implements the diversity architecture 
[Figure 1-1] using a Line Sense Module (LSM)to provide a hardwired OR configuration between Diversity Groups ALS-A and ALS-B and to enable the ALS to perform continuous error checks.Upon detecting the following conditions, noted actions shall be taken: 1. Failure to Trip on Demand Close ALS Failure contact 2. Trip without Demand Close ALS Trouble contact The LSM is illustrated in Figure 2-1. Configuration of the LSM for use in an Energize to Trip (ETT) or Deenergize to Trip (DTiT) circuit is done through field wiring terminations on the LSM and does not require any modification of any electrical properties of the LSM itself. Thus, a single LSM can be used in an ETT or DTT circuit without the need to electrically configure the module for the trip circuit type before use. This allows a single part number to be used to provide spares for both ETT and DTT circuit configurations.
Refer to the ALS System Design Specification 
[1.4.5.6]
for additional information regarding the LSM and field wiring interface.
Process Protection System Interface Requirements Specification Revision:
9 Page 53 of 78 Figure 2-1 LSM Functions S Feedback to Feedback to-9L. .ALS0-BD Fernm ALB-402-A DOhEIE Fram Bypass From ALS-402-B DO 3EEI From Byposs Switeh B-~To BBFB/RNASA Process Protection System Interface Requirements Specificaition Revision:
9 Page 54 of 78 Figure 2-2 Typical ALS Analog Input Wiring FOR INFORMATION ONLY 74x PT-937 Containment P'ressure Prot Set]Rosemnount 1154 P -937 Containment P ,essure Pint SetI VB1 En-En mono ALS-A lonExteomal Current I 3 Shunt Mode ALS 321 Card BS Eut emat current Shunt Mode DIN Rail Terminal Board with Disconnect Notes: External shunt resistor Rn across ALS En and An terminals allows Al card to be removed without interrupting the 4-20 mA field circuit.Exomple (Informati on Only): Colculate Rs for 0.4- 2.0 VDC Input (4-20mADC)
I t 1 too 260K R-n'Rs = (6Kto"260K -too0 R~s = 100.03850 Process Protection System Interface Requirements Specification Revision:
9 Page 55 of 78 Figure 2-3 Typical Tricon Analog Input Wiring FOR INFORMATION ONLY PRESSURIZER PRESSURE TRANSMITTER PT-ASS TO ALE-A PT-ASS Input TO ISOLATOR PM-4SS_1 PRESSURIZER LEVEL TRANSMITTER LT-4SS TO INOICATOR U-AURA (VB2)TO INDICATOR U-459B (HBSP)TO ISOLATOR LM-459 t TURBINE IMPULSE PRESSURE TRANSMITTER PT-S0S T"O AMUAC ISOLATOR PM-SUN_1 WR HOT LEO TEMP LOOP I FRO M ALS-A TE-4I3A WR HOT LEO TEMP LOOP 2 PROM ALS-B TE-423A TB k I ~ In I ~ I'I ~ I'I In I I PNL MODEL zizi Tmt ETP1 (For 3721N A!) ~ JI , JP1(T+)I. _ T-)_ _ (T-)(T+)C T-).--- (T-).. -- (A),. -- (T-)k, _ (A)J4 J3 J2 oPT455 DaDE5 oP4NJP1 aPUSJP3 oT415
* JP4 aTAN .JP5 (T+) -JPI6-PS(+)Supply 1 L __ PS(-)Anal~oP Loo --- P)-TBO Notes:* PT-455, PT-5O5, and LT-45R are powered by the Tricon ETA.* The TE-413A atnd TE-423A RTD olgoals ore conditioned by the ALE before they are iniput to the Tricon sod provided to the Tricon as 4-20 mA analog signals. They are powered by the ALE, eoternally from the Tricon ETA.*The OCPP EPE NIE inpu) signals ame S-IS VDC and will stilize a S703EN Al card and 97E3-I10NJ ETA*on not retnove Jumper JP-I7 when usning thre R792-61ONJ with the 3721 N A card.S IN Rail Terinalne Boors with Disconnect Process Protection System Interface Requirements Specification Revision:
9 Page 56 of 78 Figure 2-4 Tricon/ALS PT-455 Interface Wiring FOR INFORMATION ONLY TRI CON TB IPRESSURIZER PRESSURE / E'TRANSMITTER PT-455 ()O OT+To ALS-A PT-455 Input  E+, E- " y " _'ToISOLATOR PM-45_1 " X __+, DIN Rail Terminal Board with Disconnect
+-i.ALS ALS 321 Card'A" TB External Current Shunt Made From Tricon \" An An 1K TR External Current Shunt Made En l En 251(nlkl ~nilT~rmn~lnn An with Disconnect Note:* Rs allows ALS-321 card to be removed without breaking the 4-20 mA field circuit.
Process Protection System Revision:
9 Interface Requirements Specification Page 57 of 78 Figure 2-5 ALS-A and ALS-B SSPS Connections (Deenergize to Trip Configuration)
FOR INFORMATION ONLY Note: LSM A and LSM B are parts of a single LSM.
Process Protection System Interface Requirements Specification Revision:
9 Page 58 of 78 Figure 2-6 ALS-A and ALS-B SSPS Connections (Energize to Trip Configuration)
FOR INFORMATION ONLY Process Protection System Revision:
9 Interface Requirements Specification Page 59 of 78 2.2 Safety-Related ALS/Tricon Interface Requirements
: 1. ALS shall provide 4-20 mA analog Temperature channel inputs to Tricon [Refer to Section 1.5.5.4 for scaling information].
: 2. ALS 4-20 mA output signals shall be powered by ALS 2.3 Data Communication Interface Requirements As shown in in Figure 1-22, the Tricon portion of the PPS replacement will utilize two TCM cards in each main chassis (Slots 7L and 7R), as well as two Media converters, two Port Aggregator Network Taps, and two sets of associated media. This arrangement provides two non-safety-related communication paths to the MWS and the PPC Gateway Computer from each Protection Set to ensure continued communications if a Single non-safety-related communication component fails.2.3.1 The PPS shall provide Non-Safety-Related Communications from Tricon to Port Aggregator Tap "A" (2-way)2.3.1.1 Hardware:
100BaseT Ethernet optical fiber to copper media converters (2).Supplied by Triconex.2.3.1.2 Media: 100baseT Ethernet optical fiber from TCM1 and TCM2 to media converters.
Supplied by Triconex.2.3.1.3 Hardware:
Net Optics PA-CU 10/l00BaseT Port Aggregator Taps (2).Supplied by PG&E.2.3.1.4 Media: I100BaseT Ethernet copper from Media Converter to Port Aggregator Tap. Supplied by PG&E.2.3.1.5 Data Interface Protocol:
Triconex Standard Ethernet NET2 2.3.2 The PPS shall support Non-Safety-Related Communications from Port Aggregator
*Tap "B" to Tricon Maintenance Workstation Computer (2-way)2.3.2.1 Hardware:
Unmanaged Ethernet switch. Supplied by PG&E.2.3.2.2 Media: 100baseT Ethernet copper 2.3.2.3 Data Interface Protocol:
Triconex Standard Ethernet NET2 2.3.3 The PPS shall support Non-Safety-Related Communications from Port Aggregator Tap "1" to Gateway computer (One-way)2.3.3.1 Hardware:
See Section 2.3.1.1.2.3.3.2 Media: 100baseT Ethernet + network hub supplied by PG&E 2.3.3.3 Data Interface Protocol:
Ethernet-based.
2.3.4 The PPS shall include a unidirectional RS-422 Non-Safety-Related Communication.link from each ALS chassis to the ALS Maintenance Workstation as follows: 2.3.4.1

== Description:==

Core Logic Board communication channel TxB2 2.3.4.2 Media: RS-422 twisted pair copper to maintenance workstation 2.3.4.3 ;Data Interface Protocol:
TxB1/TxB2 Data Packet [Reference1 
.4.5.9, App A;1.4.5.10, App A]2.3.4.4 Data transmitted via TxB2 shall display operational information including but not limited to:
Process Protection System Revision:
9 Interface Requirements Specification Page 60 of 78 1. Analog input and output values 2. Compensated analog values (e.g., LEAD/LAG PZR Pressure)3. Discrete input state (i.e., ON, OFF)4. Comparator input real values 5. Comparator raw output state (i.e., tripped, not tripped)6. Channel Status (i.e., normal or OOS)7. Discrete output state (i.e., ON, OFF)8. Channel bypass status (i.e. bypassed or not bypassed)9. LSM feedback status (i.e., ON, OFF)10. Power supply status 11. TAB connection status 12. Alarm status; (i.e., active, clear)13. Channel integrity status 2.3.5 The PPS shall include a bi-directional RS-485 Non-Safety-Related Communications link from each ALS chassis Test ALS Bus (TAB) to the ALS Maintenance Workstation (physically disconnected when TAB is not in use) as follows (Refer to Figure 2-7 for TAB communication interface connections):
2.3.5.1

== Description:==

TAB interface with ALS chassis 2.3.5.2 Media: RS-485 twisted pair copper.2.3.5.3 Data Interface Protocol:
TAB [Reference 1.4.5.10, Section 5.2]2.3.6 The PPS shall include a unidirectional RS-422 Non-Safety-Related Communications I link from each ALS chassis to the Gateway Computer as follows:I 2.3.6.1

== Description:==

Core Logic Board communication channel TxB1 2.3.6.2 Media: RS-422 twisted pair copper to Gateway computer 2.3.6.3 Data Interface Protocol:
TxB1/TxB2 Data Packet [Referencel1.4.5.9, App A;1.4.5.10, App A]2.3.6.4 Data transmitted on TxB1 shall be identical to the data transmitted on TxB2.2.3.7 Keyboard, Video Display, and Mouse (KVM) Switch 2.3.7.1 The KVM switch provided by PG&E enables sharing a video display and USB HMI peripheral devices between multiple computers.
: 1. The KVM switch shall enable the Tricon MWS computer and the ALS MWS computer to be controlled from one single KVM console per protection set using analog VGA video links to a single VGA monitor.2. The KVM switch shall permit only connections between the video display and USB interface devices and the single selected computer.Connection between the computers or to multiple computers shall not be..... :ted----J__!___
__I__IIL_
___ ____U.3. The USB HMI peripheral devices controlled by the KVM switch are limited to: a. Keyboard b. Mouse c. Touchscreen interface device\
Process Protection System Revision:
9 Interface Requirements Specification Page 61 of 78 d. Printer Printer functionality shall be limited to simple printing via hardwired USB interface only..4. The KVM Switch supports switching the video display and HMI interface devices between the connected computers via the following means: a. Keyboard hotkeys b. Front panel switch'c. Mouse button 5. The KVM switch enables mouse and keyboard input devices to be switched instantaneously and reliably between the connected computers without requiring the devices to be enumerated upon transfer.
Item 7, below explains enumeration.
: 6. The KVM switch includes two independently switchable, enumerated USB channels for other devices. The first channel (USB1) shall be used for the Touchscreen interface device. The second channel (USB2) shall be used to connect a printer to the workstation to support calibration, maintenance and surveillance test operations.
: 7. The independently switchable USB channels provide enumerated switching, which requires the connected USB device to perform a full initiation process (i.e., enumeration) every time it is switched.
The enumerated switch shall pass signals straight through the switch between the USB device .and the computer without interpretation.
: 8. The switch utilizes the default switching mode, in which the video display, keyboard and mouse and the enumerated USB ports are all switched together.9. (deleted)10. The PPS replacement application will not utilize the audio interface.
: 11. PG&E will provide multiple KVM stations for the DCPP PPS Replacement application, one per protection set.2.3.7.2 Media: Copper 2.3.7.3 Data Interface Protocol:
USB, Analog VGA 2.4 System Power Supply 2.4.1 I/O Power Refer to Section 2.1.1 2.4.2 Tricon System Power Supply The Tricon portion of the PPS replacement will use the standard Triconex V1 0 AC power distribution design. An external independent vital 120 VAC 60 HZ power source will be provided by PG&E for each Protection Set. The single vital 120 VAC source for each Protection Set will be connected in parallel to the dual input power suppiy foreach-Tricon "vi0 Proi~ection SeL:Power fiiters-wiii reduce conducted noise to acceptable levels in accordance with USNRC Regulatory Guide 1.180, Rev 1.2.4.3 ALS System Power Supply The ALS "A" and ALS "B" chassis in each Protection Set requires two safety related sources of 48 VDC power for the ALS chasses and the individual boards within the chasses. The power supplies and 120 VAC sources are provided by PG&E.
Process Protection System Revision:
9 Interface Requirements Specification Page 62 of 78 2.5 Instrument Power Supply Locations To be determined by detailed design.2.6 System Power Sources Provided by PG&E 2.6.1 The following power sources are available for the Process Protection System: 2.6.1.1 120 Vac vital instrument power [1.4.4.7]:
Voltage: 120V +/-10%Frequency:
60 HZ +/-5%2.6.1.2 Non-safety-related 120 Vac utility power 2.6.2 Harmonic Distortion Limitations PG&E practices power supply quality monitoring.
As-found and as-left Total Harmonic Distortion (THD) measurements will be performed on power supply at PPS 120 Vac power supply input terminals before and after installation of equipment powered from the 120 Vac vital instrument power supply. Refer to USNRC Reg.Guide 1.180 [1 .4.3.3].2.7 Workstations 2.7.1 Maintenance Workstations Separate and independent Maintenance Workstation computers are provided for the Tricon and ALS subsystems in each Protection Set to allow independent processing and display of information from both Triconex and ALS portions of the PPS.2.7.1.1 The Tricon shall interface (2-way) with the HMI application in the Tricon MWS computers.
The TS1131 PPS application contains function blocks that allow WRITE-access to a limited set of parameters programmed into the application software with the Tricon keyswitch in the RUN position.
Without these function blocks programmed into the application program parameters cannot be modified with the keyswitch in the RUN position.The unmanaged Ethernet switch shown in Figure 1-22 between each port aggregator network tap Port B and the two Tricon MWS computer network interface ports in each Tricon MWS computer will be provided to ensure continued Tricon multicast operation in the event of MWS network communication failure.2.7.1.2 The ALS-A and ALS-B interface (1-way) shall communicate concurrently with the HMI application in the ALS MWS computer via the isolated TxB2 RS-422 data link [2.3.4].2.7.1.3 The two MWS computers in each Protection Set will share peripheral devices through a KVM switch. Refer to Section 2.3.7 for details.2.7.2 ALS Service Unit Application Software 2.7.2.1 The ASU software application shall be provided by Westinghouse to run on the ALS Maintenance Workstation.
2.7.2.2 The ASU application utilizes a two-way RS-485 communication link to communicate with the Test ALS Bus (TAB) that is physically disconnected from the MWS computer when it is not in use [2.3.5].
Process Protection System Revision:
9 Interface Requirements Specification Page 63 of 78 2.7.2.3 The activation of the TAB via connecting the TAB data link to the MWS computer shall not interfere with the ability of the ALS safety channels to perform their respective safety functions and the ALS shall remain operable during activation of the TAB.2.7.2.4 Capability shall be provided to place Individual channels in bypass from the ASU for maintenance and the non-bypassed channels in the ALS chassis shall continue to be operable with respect to their safety function.2.7.2.5 The TAB from ALS Chassis "A" and Chassis "B" will be provided with individual RS-485 ports on the ALS MWS computer.2.7.2.6 The ASU application shall ensure that the correct TAB is connected to the respective MWS RS-485 port.Note: To detect the TAB connection, the ALS-1 02 Dl 2 needs to be connected to ALS-1 02 'Input. Rtn as shown in Figure 2-7 [Reference 1.4.5.8, Figure 4-2].2.7.2.7 The ASU application shall provide passive system status display(s) ) of the information listed in Section 2.3.3.4 using one-way ALS-102 RS-422 Transmit Bus TxB2.2.7.2.8 The ASU passive system status display(s) shall function without the TAB being connected.
2.7.2.9 The ASU application shall include the capability to modify adjustable parameters (comparator setpoints, calibration coefficients, and tuning constants).
2.7.2.10 The capability to modify adjustable parameters shall be available only via the TAB when the TAB is connected.
2.7.2.11 The ASU application shall provide functions specified in the FRS that support periodic surveillance testing, including calibration requirements per Sections 2.9.6.1 through 2.9.6.5 of this specification.
These functions include, as a minimum: 1. Set comparator outputs in the energized or deenergized state, independent of the application demand, 2. Force other discrete outputs (such as alarms) to the open or closed state independent of the application demand.3. Force analog input or output values independent of the input signal or application demand.2.7.2.12 The ASU application shall be compatible with a Microsoft Windows XP (SP3 or later) operating system.2.7.2.13 The ASU application shall include capability to log: 1. Tunable parameters
: 2. Setpoints 3. System diagnostic alarms 2.8 Alarm Interface Requirements The PPS shall provide the following alarm output signals from each Protection Set for connection to the Main Annunciator System (MAS) in the DCPP Main Control Room (MCR). Separate signals shall be provided for these alarms from each Protection Set per Section 3.2.1.5 of the FRS [1.4.4.2].
Process Protection System Revision:
9 Interface Requirements Specification Page 64 of 78 2.8.1 PPS Failure (Deenergize to Alarm with Reflash capability implemented in PPS)The conditions listed in FRS Section 3.2.1.5.1 provide signals to initiate the PPS Failure alarm in the Main Control Room. In event of conflict with FRS Section 3.2.1.5.1 this Specification shall prevail.2.8.1.1 The TsAP alarm associated with the failure of both critical analog input power supplies or the failure of both critical analog output power supplies shall be suppressed if there is a loss of power to the digital input card[Section 2.8.2.3] associated with the power supply alarm inputs.2.8.1.2 ALS temperature input and output channel integrity failure shall not activate the PPS Failure alarm contact.1. The channel integrity status shall be provided in the TxB1 and TxB2 data streams [2.3.4 and 2.3.6]2.8.2 PPS Trouble (Deenergize to Alarm with Reflash capability implemented in PPS)The following platform-specific inputs to the Main Control Room PPS Trouble Alarm shall be provided in addition to those listed in FRS Section 3.2.1.5.2.
Other alarms not listed here or in the FRS may be provided to meet platform diagnostic requirements.
In event of conflict with FRS Section 3.2.1.5.2 this Specification shall prevail.2.8.2.1 Controller keyswitch not in RUN condition detected (Tricon only)2.8.2.2 TAB communication enabled (ALS Only).2.8.2.3 Loss of power to the digital input card (See Figures 1-5, 1-10, 1-15, 1-20).2.8.2.4 The TSAP alarms associated with the failure of a pair of primary and secondary non-critical power supplies, or the failure of a single power supply shall be suppressed if there is a loss of power to the digital input card[Section 2.8.2.3] associated with the power supply alarm inputs.2.8.2.5 ALS temperature input and output channel integrity failure shall not activate the PPS Trouble alarm contact.1. The channel integrity status shall be provided in the TxB1 and TxB2 data streams [2.3.4 and 2.3.6]2.8.3 PPS Channel in Bypass [Energize to Activate with Reflash capability implemented in PPS]The following ALS discrete output signals shall be provided in addition to those listed in FRS Section 3.2.1.5.3.
2.8.3.1 For deenergize to trip circuits, the PPS Channel in Bypass contact shall be activatedif the output circuit is energized as detected by the LSM; and: 1. The ASU is used to place any ALS channel within a specific ALS chassis in Bypass status: o~r 2. The output to the SSPS from any ALS channel within a specific ALS chassis is bypassed using the manual bypass switch [Section 2.9.6.7.8]
2.8.3.2 For deenergize to trip circuits, the PPS Channel in Bypass contact shall be activatedif the output circuit is not energized as detected by the LSM; and:.1. The ASU is used to place any ALS channel within a specific ALS chassis in Bypass status; or Process Protection System Revision:
9 Interface Requirements Specification Page 65 of 78 2. The output to the SSPS from any ALS channel within a specific ALS chassis is bypassed using the manual bypass switch [Section 2.9.6.7.8]
2.8.3.3 PPS Channel in Bypass contact shall be activated if any partial trip or other function associated with an ALS channel within a specific ALS chassis is placed in Bypass status from the ASU; that is, if a channel contains multiple partial trip outputs, the PPS Channel in Bypass contact shall remain active while any associated partial trip within a specific ALS chassis is in Bypass status.2.8.3.4 Deleted 2.8.4 PPS Channel Out of Service [Energize to Alarm with Reflash capability]
2.8.4.1 [For Tricon] Manual Channel Out-of-Service (COS) switches, where used, are provided with two (2) separate and independent output contacts.1. One contact satisfies PPS functional logic requirements per FRS Section 3.2.1 .5.5.b).2. One contact for use by the MAS, independent of the PPS per FRS Section 3.2.1.5.5.a).
2.8.4.2 [For ALS] The chassis "A" ("B") Out of Service output contact: 1. Shall be activated when any protection channel or function within the respective chassis has been defeated from the ASU.2. Shall reflash when a subsequent channel or function within the chassis is defeated while any other channel or function in the respective chassis is out of service.2.8.5 RTD Failure Alarm (MAS) [Energize to Alarm with Reflash capability]
Requirements for the RTD Failure alarm are provided in FRS Section 3.2.1.5.4.
2.8.6 SIG Low-Low Level TTD Timer Actuated Alarm Requirements for the SIG Low-Low Level TTD Timer Actuated alarm are provided in FRS Section 3.2.11.5.
Process Protection System Interface Requiremerlts Specification Revision:
9 Page 66 of 78 Figure 2-7 Typical TAB Communication Link Connection ALS BACKPLANE CONNECTOR ALS-102 CLB ISLOT 10 INPUT.C2<
INPUT.C2 P13-E6 J3 102-I.C2<-
INPU.R (3-E J3-102-1.E6TAB- 3 PI-A10 JII02-I.AI0 TA+ AB4- P1-All 11J-02-1.AII ALS BA CEPANEL CONNECTOR INPUT.C2 JI0-E6 IPIO-E6 <4 INPT.RN jP10-D5 TA+ AB YI1A2 PI Pl-A2 1 2 ASUCOMENABLED fl II2 INPUTr.RTN 
<2  TAB- 4 <TAB CONNECTOR TAB- RS45-STAB+TO MAINTENANCE TERM4 qp ALS BOARDS BACKPLANE PCB CABINET WIRING+ALS RACK Process Protection System Revision:
9 Interface Requirements Specification Page 67 of 78 2.8.7 For the Tricon alarm conditions identified in Section 2.8.7.3 time delay off shall be applied to the alarm in the TSAP so as to provide adequate time for the alarm to be transmitted to and logged by the MWS.2.8.7.1 A time delay off shall be applied to the alarm in the TSAP so as to provide adequate time for the alarm to be transmitted to and logged by the MWS.2.8.7.2 Unless otherwise specified, the initial time delay off shall be set to 5 seconds.2.8.7.3 Tricon Alarm Conditions
: 1. Input OCR (FRS 2.3.1.2)2. Failure to set Trip on Demand (FRS 3.2.1.5.1 a))3. Trip output set without demand (FRS 3.2.1.5.2 a))4. Loss of critical power supply (FRS 3.2.1.5.2 b))5. Loss of a non-critical power supply (FRS 3.2.1.5.2 c))6. Input deviation 
-SQA2 (FRS 3.2.1.5.4 a))7. Two bad inputs -SQA2 (FRS 3.2.1.5.4.b))
: 8. Less than two good inputs -SQA3A and SQA3B (FRS 3.2.1 .5.4.c))9. NI input open circuit (FRS 3.2.5.5.4 b))-1O. Thot input deviation (FRS 3.2.5.5.5 c))11. Loss of power to digital input card (IRS Section 2.8.2.3)2.9 Software Constraints and Requirements 2.9.1 Deleted 2.9.2 Deleted Process Protection System Interface Requirements Specification Revision:
9 Page 68 of 78 2.9.3 Tagname Convention 2.9.3.1 Deleted 2.9.3.2 ALS Service Unit (ASU)a. The tagname convention shown in Table 1 shall be used for display of PPS variables that are transmitted to the ALS MWS. (Tagnames are assigned in the ASU)b. The ALS MWS displays shall utilize the tagnames provided in the I/O List[Appendix 4.1 through Appendix 4.4].Table 1 Tagname Convention First Character Description a Scaled signal from analog input module c Discrete output points d Discrete input points e Enterable Analogs f Internal Discrete g Enterable Discrete_____ Integer values k Fixed Constant m Alarm / Trip Flag o Override Discrete (Not used in PPS)ov Override Value Real (Not used in PPS)p Pulse Inputs (Not used in PPS)q Quality Code DINT r Internal Analog Real w Raw Analog Input y Raw Analog Output 2.9.4 Deleted Table 2 Deleted Process Protection System Revision:
9 Interface Requirements Specification Page 69 of 78 2.9.5 Quality Codes A method shall be provided to identify the validity of data being transmitted to the MWS and external systems for the purpose of displaying the status of displayed information.
2.9.5.1 ALS Channel integrity information shall be included in the TxB1/TxB2 data stream.2.9.5.2 Tricon 1. Provide read-only Modbus aliased Quality Code tagnames for analog input variables.
The Quality Code (DINT) value shall be assigned per the following definitions:
Table 3 Quality Code Assignment Code Quality Description 0 Good; QC is Not 1, 2, 3,4, or 5.1 Not Used 2 Not Used 3 Not Used 4 COR; Instrument that is beyond the allowable scale.5 OOS; Instrument has been removed from service.2. The Quality Code for the individual RTD inputs to DTTA shall be set to 5 if DTTA is OOS or if the individual RTD is removed from service.3. The Quality Code for the Pressurizer Pressure input to DTTA shall be set to 5 if DTTA is OOS.4. The Quality Code for the Pressurizer Pressure input to DTTA shall be set to 4 if the OOR alarm condition is true as constrained by FRS Section 3.2.5.5.4 d).5. The Quality Code for the Power Range Flux inputs to DTTA shall be set to 5 if DTTA is OOS.6. The Quality Code for a Power Range Flux input to DTTA shall be set to 4 if the input is QOR or open circuit.Table 4 Deleted 2.9.6 On-Line Maintenance and Test Interface 2.9.6.1 The PPS shall provide capability for maintenance bypass during power operation; that is, the PPS shall permit th., c-apab.-,nility of_ an individual channel or channels to perform its protective action due to a requirement for replacement, repair, test, or calibration 
[GDC 211.2.9.6.2 The maintenance and test functions shall be accomplished without lifting electrical leads or installing temporary jumpers.2.9.6.3 The channel or channels subject to the maintenance bypass may remain in the bypassed condition within administrative time limits in accordance with Process Protection System Interface Requirements Specification Revision:
9 Page 70 of 78 DCPP technicai specifications established to meet the single failure criterion per IEEE-603-1 991 Sections 5.1 and 6.3.1.2.9.6.4 Capability to initiate protective action (i.e., to initiate partial trip or actuation) from an channel that has been removed from service for maintenance shall be provided per IEEE 603-1991 Section 6.3.2 and DCPP Technical Specifications.
2.9.6.5 Removing a PPS channel from ser~ice for maintenance shall not adversely affect the ability of channels in the same chassis that have not been removed from service to perform their safety function.2.9.6.6 Tricon PPS Subsystem Specific Requirements
: 1. Manual trip switches will be provided by PG&E on PPS partial trip and actuation outputs that de-energize to trip [FRS 3.2.1.3.4].
The switches may be used for SSPS input relay testing or to trip or actuate the channel manually if needed. Manual trip switches will not be provided for energize to trip outputs.2. On-lin testing shall be controlled by the safety-related Tricon processor enabled via a permissive from an safety-related hardwired manual Out of Service (OOS) switch.3. When the 008 switch is activated,-the safety-related function processor shall allow the associated channel to be taken out of service while maintaining the remainder of the Protection Set operable.
Features to limit inadvertently placing a channel OOS shall include, but not be limited to: 1. Aoproved PG&E procedures are reouired to perform testino operations.
: 2. Operation of the hardware OOS switch alone shall not place the channel out of service.3. More than one specific action shall be required at the Maintenance Workstation to perform the maintenance functions.
In order to perform any test operation from the maintenance workstation, the user must: (1) Activate the OOS switch for the specific ioop to be tested (2) Log in as a maintenance user on the maintenance workstation (3) Open the maintenance screen for the specific loop being testec (a) On the maintenance screen, request the desired test mode (b) On the maintenance screen, confirm the requested test mode (Loop logic in Tricon is placed OOS only after the requested mode is confirmed)(c) Deleted (d) Deleted (e) If it is desired to change the test mode, repeat steps 3.(a)through 3.(d) ........ u. ^k ... it -,..selecting a different test mode alone shall not cause or require returning the channel to service.(4) The channel shall return to service: (a) When the OOS switch is returned to its normal position; or (b) When so commanded from the MWS 4. Feedback is provided to the user on the maintenance workstation that the hardware OOS switch for the loop to be tested has been activated.
Process Protection System Revision:
9 Interface Requirements Specification Page 71 of 78 5. Continuous indication is provided in the control room that a loop is 00S.6. If the safety-related hardware out of service switch is not activated, non-safety-related actions or failures cannot adversely affect the safety-related function.7. A bistable is not permitted to be bypassed if the manual trip switch is in the trip position.
The MWS shall advise the user that bypass is not permitted and shall allow the user to test in trip in this condition following request and confirmation as described above.8. (For PC-505A and PC-506A Turbine Impulse Pressure to P-13) If a bistable is being tested in trip mode and the manual trip switch is closed and the manual bypass switch is placed in the BYPASS position: (1) The logic for the associated bistable(s) shall transfer to Test in Bypass immediately and without confirmation from the MWS.(2) If the manual trip switch is open, the logic for the associated bistable(s) shall not transfer to Bypass and MAS control room bypass alarm referred to in ERS 3.2.1.5.3 shall be suppressed.
(3) When the bypass switch is restored to the Normal condition with the manual trip switch closed, the bistable shall remain in Test in Bypass mode until (1) the channel is returned to service per 3.c.(4), above;or (2) the bistable test mode is changed per 3.c.(3), above.9. If a bistable is being tested in bypass mode and a manual trip switch is placed in the TRIP position, the logic for the associated bistable(s) shall transfer to Test in Trip mode immediately and without confirmation from the MWS.(1) When the trip switch is restored to the normal condition, the bistable shall remain in Test in Trip mode until (1) the channel is returned to service per 3.c.(4), above; or (2) the bistable test mode is changed per 3.c.(3), above.10. For deenergize to trip outputs, the PPS Trouble Alarm due to trip output set without demand shall be suppressed when the bistable is being tested in trip or bypass mode.11. For energized to trip outputs, the PPS Trouble Alarm due to trip output set without demand shall not be suppressed when the bistable is being tested in trip or bypass mode.12. PPS Failure Alarm due to failure to set trip on demand shall not be suppressed when the bistable is being tested in trip or bypass mode, except that the P-i13 Failure to set trip on demand MAS alarm shall be suppressed if the P-13 bistable bypass is initiated as in 2.6.6.3.h, above.4. Maintenance modes allowable under 3.c.(3) above shall include: 1. Test in Bypass: The bistable trip output is maintained in the untripped condition while in this mode; that is, Test in Bypass mode shall override the output of the channel trip comparator to prevent generation of a partial trip from the channel being tested.2. Test in Trip: The bistable trip output is mnaintained in the tripped condition while in this mode; that is, Test in Trip mode shall override the output of the channel trip comparator to initiate partial trip or actuation from the channel being tested.5. Parameter Update: Capability to update parameters such as trip setpoints or tunable parameters.
: 1. The parameter values to be updated are limited by the software application to pre-determined ranges.
Process Protection System Revision:
9 Interface Requirements Specification Page 72 of 78 2. The Maintenance Workstation software application shall request confirmation that the parameter update process is complete prior to saving the new tuning constant.6. Manual bypass switches will be provided per FRS Sections 3.2.1.3.6 and 3.2.1.5.3.
: 7. Alarm outputs from the Tricon to the MAS shall be testable.
If an OOS switch is placed in the OOS position, and a properly logged in user at the MWS commands a Test signal, the Tricon logic shall pulse the alarm output from the existing state to the opposite state for 3 seconds.2.9.6.7 ALS PPS Subsystem Related Requirements
: 1. ALS bypass and test functions shall be accomplished through the ASU application implemented in the ALS MWS as discussed in Section 2.7.2.2. Placing a specific channel in bypass from the ASU shall not affect the safety function of other channels in the same ALS chassis that are not subject to the same bypass.3. Placing an individual channel in bypass in one ALS chassis (e.g., Chassis "A")from the ASU does not affect the safety function of any channels in the diverse ALS chassis (e.g., Chassis "B) in the same protection set.4. It shall be possible to place multiple channels in bypass concurrently within an ALS chassis. However, placing multiple channels in bypass shall require individual bypass actions for each channel. It shall not be possible to place multiple channels in bypass by a single action from the ASU.5. The Test ALS Bus (TAB) must be physically connected to the MWS as shown in Figure 2-7 to allow two-way communications on the TAB between the ALS chassis and the MWS.6. The ALS-A and ALS-B chassis partial trip outputs are connected to the SSPS input relays through an LSM that allows either ALS chassis to initiate a trip or actuation without affecting the ability of the other ALS chassis to initiate a trip or actuation 
[Section 2.1.4, Figure 2-5, and Figure 2-6].7. The LSM shall not allow an ALS chassis to prevent the diverse ALS chassis from initiating a required trip or actuation.
: 8. Bypass switches on partial trip outputs, which allow removal of an ALS circuit board without initiating a false trip or actuation, will be provided by PG&E per FRS 3.2.1.3.5, 3.2.1,.3.6, and 3.2.1.5.3.
: 9. Trip switches on partial trip and actuation outputs, which allow a channel to be tripped manually, will be provided by PG&E per FRS 3.2.1.3.4.
: 10. Deleted.11. For deenergize to trip outputs, the PPS Failure contact closure due to bistable output failure to trip upon demand discrepancy shall be suppressed if a bypass is asserted from the ASU or from the manual bypass switch.12. Deleted 13. Deleted 14. The ASU shall be capable of storing 7 days of recent alarm log history. Oldest data shall be overwritten.
: 15. The ASU shall be capable of receiving data from both ALS Chassis A and ALS Chassis B concurrently.
: 16. PG&E will provide adm inistrative controls to prevent enabling the TAB on both ALS Chassis A and ALS Chassis B concurrently.
Process Protection System Revision:
9 Interface Requirements Specification Page 73 of 78 2.9.7 Maintenance Tagnames (Tricon Only)-Read-only memory aliased global tagnames shall be provided for the following to facilitate maintenance, operations, and testing.1. Calculated Trip Time Delay Setpoint (REAL)2. Preset Time (PT) input to TTD Timer (REAL)3. Trip Time Delay elapsed time when the TTD timer is activated 
-zero when the TTD timer is not activated (REAL)4. SG Low Low Level Input to TTD Timer 5. RCS Loop AT Equivalent to Power (PL: % RTP)6. Raw (i.e., before TiT and TiB processing) output status of all comparators (BOOL)7. Input to all Analog Output count conversion function blocks for display of output in engineering units (REAL)8. User entered Thot Streaming Factors used to calculate Tfhjest (REAL)9. Corrected Tfhjest values for the three SQA-3A Thot inputs for each RCS loop (REAL)10. Corrected Tfhjest values for the three SQA-3B Thot inputs for each RCS loop (REAL)11. Validated Tfhavg "A" value for the SQA-3A output for each RCS loop (REAL)12. Validated Tfhavg "B" value for the SQA-3B output for each RCS loop (REAL)13. Validated Tfhavg SQA-3 Output for each RCS loop (REAL)14. Validated Tfcavg SQA-2 Output for each RCS loop (REAL)15. Tavg for each RCS Loop (REAL)16. (For OTDT) Lead/Lag compensated value of Tavg for each RCS loop (REAL)17. (For OPDT) Rate/Lag compensated value of Tavg for each RCS loop (REAL)18. OTOT Setpoint for each RCS loop (REAL)19. OPDT Setpoint for each RCS loop (REAL)20. Process value inputs to OPDT and OTDT comparators for each RCS loop (REAL)21. LEAD/LAG compensated value of AT for each RCS loop (REAL)22. LEAD/LAG compensated Steamline Pressure (REAL)23. RATE/LAG compensated Steamline Pressure (REAL)24. Normalized Power (PB) (REAL)25. Pressure Compensated Steam Flow (REAL)26. Calculated Streaming Factors (FRS 3.2.5.13.10) output to MWS Process Protection System Revision:
9 Interface Requirements Specification Page 74 of 78 3 PPS Cyber Security 3.1 Secure Development and Operating Environment Safety-related PPS Application software shall be developed in a secure development and operating environment (SDOE) per Reg. Guide 1.152 Rev 3 [1.4.3.5].
3.2 Technical Controls This section is applicable to both the Tricon and the ALS Maintenance Workstations unless otherwise stated.3.2.1 Account Management 3.2.1.1 The Supplier should recommend which operating system accounts need to be active and those that can be disabled, removed, or modified.3.2.1.2 PG&E will approve the Supplier's recommendation in writing.3.2.1.3 Supplier shall identify all active accounts prior to delivery.3.2.2 Access Enforcement Authorizations for controlling access shall be in accordance with established policies and procedures 3.2.2.1 Privileged functions shall be defined and documented.
3.2.2.2 For a defined access right or level, Least Privilege assigns the most restrictive set of rights/privileges or access needed by users for the performance of specified tasks.3.2.2.3 A user shall not be able to escalate privileges, under any circumstances, without logging into the administrator or developer access level first.3.2.2.4 Documentation defining access and security permissions, user accounts, applications, and communication paths with associated access levels shall be provided.3.2.2.5 Access Levels 1. Access levels shall be job function (role) based with configurable access and permissions associated with the defined role 2. (Tricon MWS Only) At a minimum, there shall be four assigned access levels: a. GUEST Access limited to indication only screens; shall not be able to modify access level roles or passwords; shall not be able to acknowledge alarms. This access level does not require authentication.
: b. MAINT1 Access to all screens includingmaintenance screens; shall be able to remove and return channels to service except RTD channels that are input to DTTA; shall not be able to modify access level roles or passwords; shall be able to acknowledge alarms; shall be able to change the following tunable parameters.
This access level requires authentication.
: 1) Steam Flow adjustment factor (in) (FRS 3.2.9.14.1.g))
: 2) Full Power AT (FRS 3.2.5.14.7 n))
Process Protection System Revision:
9 Interface Requirements Specification Page 75 of 78 3) Full Power Tavg (FRS 3.2.5.14.7 o) & p))4) Thot Streaming Factors (FRS 3.2.5.14.7 gg))5) Thot Input Deviation Setpoint (DeltaH) (FRS 3.2.5.14.7 r))6) Delta I Coefficient (SCAL FLUX) (FRS 3.2.5.14.7 ii))c. MAINT2 Access to all Maintl screens or functions; shall be able to change comparator setpoints and tunable parameters; shall be able to remove and return channels to service; shall be able to remove from service and return to service RTD channels that are input to DTTA;may acknowledge alarms; shall not be able to modify access level roles or passwords.
This access level requires authentication.
: d. ADMINISTRATOR An Administrator access level shall be provided as the most privileged level with ability to change passwords.
This access level requires authentication.
: 3. (ALS MWS Only) At a minimum, there shall be four assigned access levels: a. GUEST: Access limited to indication only screens; shall not be able to modify access level roles or passwords.
This access level does not require authentication.
: b. MAINTi: Access to all screens including maintenance screens; shall be able to remove and return channels to service; shall not be able to modify access levels or passwords; shall be able to acknowledge alarms;shall be able to change the following tunable parameters.
This access level requires authentication.
: 1) RCS Flow adjustment factor (in) (FRS 3.2.2.14.2 a))2) RCS WR Temperature RTD coefficients (a, b, & c) (FRS 3.2.3.14.2 c), d) & e))3) RCS NR Temperature RTD coefficients (a, b, & c) (FRS 3.2.5.14.7 I1), mm) & nn))c. MAINT2: Access to all Mainti screens or functions; shall be able to change comparator setpoints and tunable parameters; shall not be able to modify access level roles or passwords.
This access level requires authentication.
: d. ADMINISTRATOR:
An administrator access level shall be provided as the most privileged level with the ability to change passwords.
This access level requires authentication.
: 4. Separation of functions through assigned access authorizations shall ensure independence in the responsibility and functions assigned to an access level.
Process Protection System Revision:
9 Interface Requirements Specification Page 76 of 78 3.2.3 System Use Notification 3.2.3.1 The Supplier shall supply a user configurable message on the display when the user logs on. This "System Use Notification" message should appear before granting system access to the user and should include: 1. The user is accessing a restricted system.2. System usage may be monitored, recorded and subject to audit.3. Unauthorized use is prohibited and subject to penalties.
3.2.3.2 The "System Use Notification" message shall remain on the display until the user takes explicit actions to log on or exit 3.2.4 Password Requirements Passwords shall be controlled and configurable per the following:
3.2.4.1 The Supplier should provide a configurable account password management system that allows for: 1. Capability shall be provided to support complex passwords.
: 2. Capability shall be provided to change passwords on a routine frequency.
: 3. Authority to change passwords shall be limited to the most privileged (i.e., the Administrator) access level.3.2.4.2 Password length and composition for authentication
: 1. Microsoft Security policies for length and complexity meet minimum requirements for definition.
: 2. Password shall ensure obscure feedback of authentication information (not transmitted in clear text) during the authentication process to protect the information from possible exploitation/use by unauthorized individuals.
3.2.4.3 Permitted actions without Identification or Authentication
: 1. Specific user actions (i.e., the Guest/Operator access level) that can be performed without identification or authentication shall be documented.
: 2. The Supplier shall identify the basis for such actions (adversely affecting safety, security, and emergency preparedness, etc.) to be performed without identification and authentication.
3.2.5 System Hardening System components and software should be configured only for the needs of the specification.
3.2.5.1 Supplier shall provide documentation of required applications, utilities, system services, scripts, configuration files, databases, other software and the apropiat c-onfigu rations, including firmware, revisions and/or patch levels for the associated system.1. Such documentation shall include all third party software used in the software, including all libraries, frameworks, components, and other products, whether commercial, free, open-source, or closed-source.
3.2.5.2 Supplier shall provide a listing of necessary ports and services required for normal and emergency operations.
Process Protection System Revision:
9 Interface Requirements Specification Page 77 of 78 1. The listing shall include an explanation or cross reference to justify why a service is necessary for operation and those services and programs that are necessary for operation are allowed.3.2.5.3 Supplier shall remove and/or disable software components that are not required for the operation and maintenance prior to delivery.1. Supplier shall document software components that were removed and/or disabled.3.2.5.4 Supplier shall document the changing or disabling of access to files and functions (if any).3.2.5.5 The operating system administrator shall have the ability to re-enable devices if the devices are disabled by software.3.2.6 MWS Startup Automatic Login 3.2.6.1 Upon boot up, the MWS computer shall automatically log into the required operating system account with no user interaction.
3.2.6.2 Upon boot up supplier software interfaces shall automatically log into the least privileged access level with no user interaction.
Process Protection System Revision:
9 Interface Requirements Specification Page 78 of 78 4 Appendices 4.1 Protection Set l11/0 List 4.2 Protection Set II11/0 List 4.3 Protection Set ill I/O List 4.4 Protection Set IV I/O List Appendix Notes Analo~q Inputs: (1) Not used.(2) Can be downgraded to IB,D,2 if properly isolated from IA equipment.
(3) Transmitter input of 4-20 mA to be converted by PPS hardware such that input card removal will not break transmitter loop continuity.
(4) Deleted (5) The "w" tagname is for the raw D/A count input (DINT); the "a" tagname is for the scaled input (REAL).(12) TE-454 is a thermowell-mounted 3-wire, 200 ohm platinum RTD.Analoq Outputs: (6) Deleted (7) From analog sensor input loop, isolation not required (8) Deleted (9) The "y" tagnames are counts to the D/A (DINT).(10) Signal is isolated to Class II via qualified isolation device.(11) Continuity supervision is not required for this ETT output to the PORV interlock in RNASA.
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 Qh~ 1,nf O r ,1SET I ANALOG INPUTS _____ i NT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) LCHANNEL FUNCTION iN TAG TYPE TE-413A 200 OHM RTD IB,A,1 0 -700 &deg;F Diverse-A A 5 1 311 (w)aTE413A A WRN Temp Loop 1 Hot Leg (for RTD conversion to mA)TE-413B 200 OHM RTD IB,A,1 0 -700 0 F Diverse-A A 5 2 311 (w)aTE413B A WRN Temp Loop 1 Cold Leg (for RTD conversion to mA)TE-410OB 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 3 311 (w)aTE41 08 A DTTA Loop 1 Tcold-1 (for RTD conversion to mA)TE-410A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 4 311 (w)aTE410A A DTTA Loop 1 Thot-lA (for RTD conversion to mA)-TE-411lA 200 OHM RTD IA 350 -650 =F Diverse-A A 5 5 311 (w)aTE411lA A DTTA Loop 1 Thot-2A (for RTD conversion to mA)TE-41 2A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 6 311 (w)aTE41 2A A DTTA Loop 1 Thot-3A (for RTD conversion to mA)FT-414 4-20 mA (3) IA 0- 100 XMTR dp% Diverse-A A 6 1 -321 (w)aFT414DP A Reactor Coolant Flow Loop 1 FT-424 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 __ 2 321 (w)aFT424DP A Reactor Coolant Flow Loop 2 __________
FT-434 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 321 (w)aFT434DP A Reactor Coolant Flow Loop 3 __________
FT-444 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A j A 6 4 321 (w)aFT444DP A Reactor Coolant Flow Loop 4 PT-455 4-20 mA 3) IA 1250 -2500 psig Diverse-A A 6 -5 321 (w aPT455 A PZR Pressure PT-937 4-20 mA (3) IA 55 psig Diverse-A A 6 -6 321 (w)aPT937 A Containment Pressure TE-423A 200 OHM RTD IBA,1 0 -700 0 F Diverse-B B 5 1 -311 (w aTE423A B WR Temp Loop 2 Hot Leg (for RTD conversion to mA)TE-423B 200 OHM RTD IA 0 -700 &deg;F Diverse-B B 5 2 311 (w)aTE423B B W/N Temp Loop 2 Cold Leg (for RTD conversion to mA)TE-411lB 200 OHM RTD IA 350 -650 0 F Diverse-B B ___ 5 311 (w)aTE4I18B B DTTA Loop 1 Tcold-2 (for RTD conversion to mA)TE-410C 200 OHM RTD IA 350 -650 &deg;F Diverse-B
__B __ 5 4 311 (w)aTE410C B DTTA Loop 1 Thot-lB (for RTD conversion to mA)TE-41 1C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 5 -311 (w)aTE411IC B DTTA Loop 1 Thot-2B (for RTD conversion to mA)TE-412C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 6 311 (w)aTE412C 8 DTTA Loop 1 Thot-3B (for RTD conversion to mA)FT-414 4-20 mA (3) IA j 0 -100 XMTR dp% Diverse-B
___B ___ 6 1 321 (w aFT414DP B Reactor Coolant Flow Loop 1 __________
FT-424 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B -6 2 321 (w)aFT424DP B Reactor Coolant Flow Loop 2 __________
FT-434 20 mA (3) IA 0 -100 XMTR dp% Diverse-B B ___ 6 3 321 (w)aFT434DP B Reactor Coolant Flow Loop 3 __________
FT-444 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 4 -321 (w)aFT444DP B Reactor Coolant Flow Loop 4 __________
PT-455 4-20 mA (3) IA 1250 -2500 psig Diverse-B B 6 5 321 (w aPT455 B PZR Pressure PT-937 4-20 mA (3) IA 55 psig Diverse-B B 6 6 321 (w)aPT937_B Containment Pressure NE-41A 0-10OVDC IA 0 -120 %Tricon T__ 2 1 3703EN (w)aNE41A DTTA~o LO 1 Upper (Neutron)
Flux NE-41 B 0-10 VDC IA 0 -120 %____ Tricon T -2 2 3703EN (w)aNE41 B DTTA Loop 1 Lower (Neutron)
Flux TE-413A 4-20 mA (3) IB,A, 1 0 -700 &deg;F Tricon 1 3 1 -3721N (w)aTE413A WRN Temperature Loop 1 Hot Leg TE-413B 4-20 mA (3) IA 0 -700 &deg;F Tricon 1 3 2 3721N (w)aTE413B V/N Temperature Loop 1 Cold Leg _______TE-410B 4-20OmA 3) IA 510 -630 &deg;F Tricon __1 3 3 3721N (w)aTE410B DTTA Loop 1 Tcold-1 TE-410A 4-20OmA (3) IA 530 -650 &deg;F Tricon 1 3 4 3721N (w)aTE410A DTTA Loop 1 Thot-lA TE-41 1A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 3 5 3721 N (w)aTE41 1A DTTA Loop 1 Thot-2A TE-412A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 ___ 3 6 3721N (w aTE412A DTTA Loop 1 Thot-3A PT-455 4-20 mA (3) IA 1250 -2500 psig Tricon ___1 -3 __7 3721N (w)aPT455 DTTA Loop 1 PZR Pressure FT-522 4-20 mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 3 6 3721N (w aFTF522DP Loop 2 Steamfiow o -4.5 MPPH Tdicon N/A NIA N/A N/A rFT522 Loop 2 Steamflow Compensated FT-542 4-20 mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 3 9 3721N (w)aFT542DP Loop 4 Steamfiow 0 -4.5 MPPH Tricon N/A N/A N/A N/A rFT542 Loop 4 Steamfiow Compensated PT-524 4-0m 3) IA 0 -1200 psg Tricon 1 3 10 3721N (w aPT524 Loop 2 Steamline Pressure PT-544 4-20 mA (3) IA 0 -1200 psig Tdicon 1 11 3721 N (w)aPT544 Loop 4 Steamline Pressure LT-529 4-20 mA (3 IA 0 -100 %Tricon 1 3 12 3721N (w aLT529 SIG 2 Level Tdicon 1 _ 3 13 3721N Spare ____________________
PT-S05 4-20 mA (3) IA 0 -110 %Tdcon 1 -3 14 3721 N (w)aPT505 Turbine Impulse Pressure Tnicon 1 3 15 3721N Spare ____________________
TE-423A 4-20OmA (3) IBA,1 --700 0 F Tricon 1 4 1 3721N (waTE423A 
/R Temperature Loop 2Hot Leg TE-423B 4-20 mA (3) IBA,1 -0700 &deg;F Tdicon 1 4 2 3721N (w)aTE423B V/N Temperature Loo 2 Cold Leg TE-411B 4-20 mA (_3) IA -510 -630 0 F Trbcon 1 4 3 3721N (w)aTE411B DTTA Loop 1 Tcold-2 TE-410OC 4-20 mA (3) IA 530 -650 &deg;F Tncon 1 4 4 3721 N (w aTE4100 DTTA Loop 1 Thot-1 B TE-41 1C 4-20 mA (3) IA 530-650 0 F Tricon 1 4 5 3721 N (w)aTE4I11C DTTA Loop 1 Thot-2B TE-412C 4-20OmA(3)
IA 530 -650 0 F Trdcon 1 4 6 3721N (waTE412C DTTA Loop 1 Thot-3B LT-459 4-20 mA (3) IA 0 -100 %Tricon 1 L[4 7 3721N (w)aLT459 PZR Level PPS Interface Requirements Specification, Rev 9 Appendix 4.1I ANALOG INPUTS _ _ _ _ _ _ _r SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) {CHANNEL FUNCTION-bneem zoi TAG TYPE FT-512 4-20 mA (3) IA (2) [ 0 -100 XMTR dp% Thcon 1 4 8 3721N (w)aFT512DP Loop 1 Steamfiow_______ 4.5 MPPH Tricon N/A N/A N/A N/A rFT512 Loop 1 Steamtlow Compensated FT-532 4-0mA (3) IA (2) 0 -100 XMTR dp% Tricon 1 4 9 3721N (w)aFT532DP Loop 3 Steamfiow S______ _0 -4.5 MPPH Tricon N/A N/A N/A N/A rFT532 Loop 3 Steamfiow Compensated PT-514 4-20 mA (3) IA 0 -1200 psij Tricon 1 4 10 3721N (w aPT514 Loop 1 Steamline Pressure PT-534 4-20 mA (3) IA 0 -1200 psig Tricon 1 4 11 3721N (w)aPT534 Loop 3 Steamline Pressure LT-539 4-20 mA (3) IA0 -0100 %____ Tricon 1 4 12 3721N (w)aLT539 S/G 3 Level LM-459 1 20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level FM-512_1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow FM-512 2 4-20 mA IA (2) L NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow Compensated FM-522 1 4-20mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamfiow FM-522 2 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamfiow Compensated FM-532 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamfiow FM-532 2 4-20 mA IA (2) -NA NA __Isolator N/A N/A N/A N/A N/A Lo'op 3 Steamfiow Compensated FM-542 1 4-20mA IA (2) -NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamflow FM-542 2 4-20 mA IA (2) -NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamtlow Compensated PM-514 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamline Pressure PM-524 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamline Pressure PM-534 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamline Pressure PM-544 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure LM-529 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-539 1 4-20mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level LM-539 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level PM-505_1 4-20mA IA NA NA Isolator N/A N/A N/A N/A N/A Turbine impulse Pressure PM-455 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Pressure FM-4148 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 1 Normalized FM-424B 1 4-20 mA IA NA ___ NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-434B 1 4-20 mA IA -NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized FM-444B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 111/0311/1212013________
______________________
_________
________ __________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 PROTECTION SET I DISC.RETE INPUTS T ____ ,-uSet3o9 INSTRUMENT
__ SIGNAL TYPE I NST. CLASS PROCESSOR CHASSIS SLOT CARD TAGNAME CHANNEL FUNCTION TAG j TYPE FC-414 FB LSM A _ 48 VDC IA Diverse-A A 7 1 302 dFC414 LSMA Loop 1 Low Flow Rx Trp LSM A Feedback FC-424_PBLSMA 48 VDC IA Diverse-A A 7 2 302 dFC424 LSMA Laoo 2 Low Flow Rx Trip LSMA Feedback_FC-434_FB LSMA ', 48 VDC IA T Diverse-A A 7 __3 302 dFC434 LSMA Loop 3 Low Flow Rx Trip LSM A Feedback FC-444 FB LSM A 48 VOC IA Diverse-A A 7 4 302 dFC444 LSMA Loop 4 Low Flow Rx Trip LSMA Feedback _PC-455C PB LSM A 48 VDC j IA Diverse-A A 7 5 302 dPC455C LSMA PZR Press Low Rx Trip LSM A Feedback P0-455BFBLSM A 48 VDC IA __ Diverse-A A 7 6 302 dPC4558 LSMA Unblock SI, P11 LSM A Feedback PC-455APBLSM A L 48 VDC IA -Diverse-A A 7 7 302 dPC455A LSMA PZR Press High Rx Trip LSM A Feedback__
PC-455DFB LSM A 48 VDC IA Diverse-A A 7 8 302 dPC455D LSMA PZR Press Low-Low SI LSM A Feedback PC-455E PB LSM A 48 VDC IA Diverse-A
__A 7 9 302 dPC455E LSMA PZ rs ih- PORV A Feedback PC-937B PB LSM A 48 VDC IA Diverse-A A 7 11 302 dPC937B LSMA Ctmt Press Hi h-Hi h Clint Spray Ph B sIsn) LSM A Feedback FC-414 BypA_ [ 48 VDC IA Diverse-A A __ 7 12 302 dFC414 BYPA Loop 1 Low Flow Rx Trip BypA Switch Status FC-424_BypA 48 VDC -IA Diverse-A A 7 13 302 dFC424 BYPA Loop 2 Low Flow Rx Trip Byp A Switch Status FC-434_Byp A 48 VDC IA Diverse-A A 7 14 302 dFC434 BYPA Loop 3 Low Flow Rx Trip Byp A Switch Status FC-444 BypA 48 VDC IA Diverse-A A 7 15 302 dFC444_BYPA Lop ow Flow Rx Trip yp A Switch Status PC-4550_Byp A 48 VDC IA Diverse-A A 7 16 302 dPC455C BYPA PZR Press Low Rx Trip Byp A Switch Status PC-455ABypA
_ _48 VDC IA Diverse-A A 7 18 302 dPC455A BYPA PZRok I PresHihRl Ti Byp A Switch Status __________pC-455BBypA
_ 48 VDC IA Diverse-A A 7 17 302 dPC455A BYPA Unlc SI, PresHi1RxTi Byp A Switch Status PC-455D BypA -F 48 VDC IA Diverse-A A 7 19 302 dPC455D BYPA PZR Press Low-Low SI Byp A Switch Status PC-455E -48 VDC IA __ Diverse-A
___A 7 L20 302 dPC455E BYPA PZR Press High -PORV BypA Switch Status________
PC-937BBypA 48 VDC 4 IA Diverse-A A 7 22 302 dPC937B BYPA Ctmt Press High-High (Ctint Spray, Ph B sIsn) Byp A Sw Status PS3FAIL IA L 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IA ALS-A Chassis Power Supply 1 Failure (+48VA)PS6FAIL IA 48 VDC IA Diverse-A
__A 7 25 302 dPS6FAIL IA ALS-A Chassis Power Supply 2 Failure +48VB) _______PSIFAILIA 48 VDC IA Diverse-A A 7 28 302 dPS1 FAIL IA Analog Input Loop Power Supply 1 Failure PS4FAIL IA ' 48 VDC IA Diverse-A A 7 27 302 dPS4FAIL IA Analog Input Loop Power Supply 2 Failure PS2FAIL"IA 
+ 48 VDC IA __ Diverse-A A 7 _=28 302 dPS2FAIL IA ALS Contact Wettin upl 1 Failure ________PS5FAIL IA l 48 VDC IA Diverse-A A 7 29 302- dPS5FAIL IA ALS Contact Wetting Supply 2 Failure PPS I Alarrs Clear A j 48 VDC __ IA ._ Diverse-A A 10 1 102 dALMCLR IA PPS I A Alarm Clear Switch Status PPS I TABStatus A L 48 VDC IA Diverse-A A 10 2 102 dTABSTAT IA PPS I A TAB Enable Status-PC-414 PB LSM B ____48VDC K ~IA Diverse-B
__B 7 1 302 dFC414 LSMB Loop1 LowFlowRxTip LSM 8BFeedback FC--424 PB LSM B -48 VDC -IA Diverse-B B 7 2 302 dFC424 LSMB Loop 2 Low Flow Rx Trip LSM B Feedback FC-434- FB- [SM' B -48 VDC IA Diverse-B B 7 3 302 dFC434 LSMB Loop 3 Low Flow Rx Tdip LSM-B Feedback P0-444-PB-LSM-B]
48 VDC IA Diverse-B
__B 7 4 302 dFC444_LSMB Loo 4 Low Flow RxTrip LSM B Feedback PC-455C PB LSM B -48 VDC IA Diverse-B B -7 5 302 dPC455C LSMB PZR Press Low Rx Trip LSM B Feedback PC-4,55B PB LSM B 48 VDC IA F Diverse-B
__B 7 6 302 dPC455B LSMB Unblock SI, P11 LSM B Feed-back PC-455A PB LSM B 48 VDC i IA Diverse-B B 7 7 302 dPC455A LSMB PZR Press High Rx Trip LSMB Feedback PC-455D PB LSM BS 48 VDC IA L Diverse-B B 7 8 302 dPC455D LSMB PZR Press Low-Low SI LSM B Feedback PC-455E PB LSM B 48 VDC IA L Diverse-B B 7 9 302 dPC455E LSMB PZR Press High -PORV B Feedback PC-937B PB LSM B j 48 VDC IA i Diverse-B B 7 11 302 dPC937B LSMB Clinmt Press High-High (Ctmnt Spray, Ph B sIsn) LSM B Feedback FC-414_BypB 48 VDC IA Diverse-B B 7 12 302 dFC414 BYPB Loop 1 Low Flow Rx Trip BypB Switch Status FC-424 Byp B 48 VDC IA Diverse-B B 7 13 302 dFC424 BYPB Loo~o 2 Low Flow Rx Trip Byp B Switch Status FC-434_BypB 
[ 48 VDC ] IA Diverse-B B 7 -14 302 dFC434 BYPB Loop 3 Low Flow Rx Trip BypB Switch Status FC-444_Byp B _J 48 VDC __ IA Diverse-B B 7 15 302 dFC444 BYPB Loop 4 Low Flow Rx Trip Byp B Switch Status P0-4550 ByBB 48 VDC IA j Diverse-B B 7 16 302 dPC455C BYPB PZR Press Low Rx TripBy SwitchStatus________
PC-4558_BypB 48 VDC IA Diverse-B B 7 17 302 dPC455BBYPB Unblock SI, P11 BypB Switch Status PC-455D By/p B i 48 VDC IA -Diverse-B B 7 19 302 dPC455ADBYPB PZR Press Low-Lo SI~d Byp. B Switch Status PC-455ABypB 48 VDC IA { Diverse-B B __ 7 18 302 dPC455A BYPB PZR Press Low-Lo S~Ip Byp B Switch Status PC-455EBypB 
-1 48 VDC IA Diverse-B B 7 20 302 dPC455E BYPB PZR Press High -PORV BypB Switch Status P0-9378_Byp B -48 VDC j IA Diverse-B B 7 22 302 dPC937B BYPB Ctmnt Press High-High (Clint Spray, Ph B lIsn) Byp BSw Status PS3FAIL lB ~1 48 VDC IA ] Diverse-B B 7 24 302 dPS3FAIL lB ALS-B Chaasi Power Supply 1 Failure (+48VA)PS6FAIL lB 48 VDC IA Diverse-B B 7 25 302 dPS6FAJL lB ALS-B Chassis Power Supply 2 Failure (+48VB)_ PS1FAIL lB 48 VD0 IA ] Diverse-B_
__B 7 F28 302 dPSl1FAIL lB Analog Input Loop Power SupplyI Failure PS2FAILlB 48 VDC IA DvreB B 7 7 302 dPS4FAIL lB Analog Input Loop Power Supply 2 Failure PS2FAL__B48_V____I Diverse-B B 7 i28 302 dPS2FAIL lB ALS Contact Wetting Supply 1 Failure PPS Interface Requirements Specification, Rev 9 Appendix 4.1__________Sheet 4 of 9 PROTECTION SET I DISCRETE INPUTS _______INSTRUMENT iSIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG ]_______ _____TYPE PS5FAIL lB 48 VDC IA Diverse-B B 7 29 302 dPS5FAIL lB ALS Contact Wetting upl 2 Failure_________
PPS I AlarmClear B 48 VDC IA Diverse-B B 10 1 102 dALMCLRlB PPS I B AlarmClear Switch Status PPS I TAB Status B 48 VDC IA Diverse-B B 10 2 102 dTABSTAT lB PPS l B TAB Enable Status LPIDTTAOOS 
! 24 VDC IA Tricon 2 2 1 3503EN2 dL1 DTTA OOS DTTA Loop 1 Oh. OGS Switch LP1 TTD OOS 24 VDC IA Tncon 2 2 _35_03EN-2 dL1 TTD OOS TTD Lo 1 Oh. OOS Switch T3A OS24 VDC IA Tricon 2 -2 i3 3503EN2 dT413A OOS Loop 1 WR Thot Ch. OOS Switch T413B OOS 24 VDC IA r Tricon 2 2 4 3503EN2 dT413BOOS Loo I1 WR Tcold Oh. OOS Switch T423AOOS 24 VDC IA T ridcon 2 2 -5 3503EN2 dT423A OOS Loop 2 WR Thot Oh. OOS Switch T423B OOS 24 VOC -L IA Tricon 2 -2 8 3503EN2 dT423BOOS Loop 2 WR TcoldOh. OOS Switch L459 OOS 24 VDC ! IA Tricon 2 2 7 3503EN2 dL459 OOS PZR Level Oh. OOS Switch F51 2_OOS 24 VDC IA Tricon 2 -2 8 3503EN2 dF512 OOS Loop 1 Steamfiow Oh. OOS Switch F522 OOS 24 VDC IA Tricon __ 2 -2 9 3503EN2 dF522 DOS Lo o 2 Steamfiow Oh. OOS Switch F532 00S 24 VDC IA Tricon 2 -2 10 3503EN2 dF532 OOS Loop 3 Steamfiow Oh. OOS Switch F542 OOS 24 VDC IA Tdicon 2 2 11 3503EN2 dF542 OOS Loop 4 Steamfiow Oh. OOS Switch P514 OOS ! 24 VDC IA Tdicon -2 2 12 3503EN2 dP514 DOS Loop 1 Steamline Pressure Oh. OOS Switch P524_OOS 24 VDC IA Tricon 2 2 -13 3503EN2 dP524 DOS Loop 2 Steamline Pressure Oh. OOS Switch P534 OOS 24 VDC IA Tricon 2 _ 2 14 3503EN2 dP534 OOS LoogP 3 Steamline Pressure Oh. OOS Switch P544_OOS i 24 VDC IA Trdcon 2 2 15 3503EN2 dP544 OOS Loop 4 Steamline Pressure Oh. OOS Switch L529 OOS 24 VDC j IA Tricon 2 2 16 3503EN2 dL529 OOS S1G 2 Level Oh. OOS Switch L539 OOS 24 VDC .IA Tricon 2 2 17 3503EN2 _dL539_OOS S/G 3 LevelOh. OOS Switch P505 OOS 24 VDO IA Tricon 2 2 18 3503EN2 dP505_OOS Turbine Impulse Pressure Oh. OOS Switch PS2S FAIL 15 24 VDC IA Tricon 2 2 19 3503EN2 dPS2S FAIL 15 Analog Loop (Input) Power Supy PS2S Failure Relay PS7SFAIL 15 24 VDC F IA Tricon 2 -2 20 3503EN2 dPS7S FAIL 15 AnalgLop(Input)
Power Suppo PS7S Failure Relay PS3S FAIL 15 24 VDC IA Tricon 2 2 21 3503EN2 dPS3S FAIL 15 Discrete Loop Input) Power Suppl PS3S Failure Rala PS6S FAIL 15 24 VDC IA Tricon 2 2 22 3503EN2 dPS6S FAIL 15 DiscreeLo Iput) Power Suppl PS6S Failure Relay PS45 FAIL 15 24 VDC IA Tricon 2 2 23 3503EN2 dPS4S FAIL 15 Analog Loop Output) Power Supy PS4S Failure Relay PS55 FAIL 15 24 VDC IA Tricon ___2 2 24 3503EN2 dPS5S FAIL 15 Analo~ Loop Output) Power Supy PS5S Failure Relay 2401 PVVR 15 24VDC IA Tricon 2 2 25 3503EN2 d24DI PWR 15 Loss of Power to Ipu Card_________
TS/4110 120 VAC r IA Tricon 2 5 1 3501TN2 dTS411C TRIP TC-411C0Trip Status (DTTA Loop 1)TSI411G 120 VAO IA Tricon 2 5 2 3501TN2 dTS41lG TRIP TC-4l1G Trip Status DTTDAILoop 1)TS/412D 120 VAC IA Tricon 2 5 3 3501TN2 dTS412D TRIP TC-412D Trip Status (DTTA Loop 1 TS/412G 120 VAC IA Tricon 2 5 4 3501TN2 dTS412G TRIP TO-412G Trip Status DTTDA 1.......TC423A 120 VAC { IA L Tricon 2 5 5 3501 TN2 dTC423A TRIP TC-423A Tri Status (WR Tern TE-423B)LSI459A 120 VAC I IA Tricon 2 5 6 3501TN2 dLS459ATRIP LC-459A Tri Status (PZR LevelLT-459)
PS/514A 120 VAC IA Tricon 2 5 7 3501TN2 dPS514ATRIP PC-514A Trip Status (S/G 1 Stmline Press PT-514)______
PS/514C 120 VAC IA Tricon 2 5 8 3501TN2 dPS514C TRIP P0-5140 Tri Status (S/G 1 Stmline Press PT-514)PS/524A 120 VAC IA Tricon 2 -5 9 3501TN2 dPS524A TRIP PO-524A Tri Status (S/G 2 Stmline Press PT-524)PS/524C 120 VAC IA Tricon 2 5 10 3501TN2 dPS524CTRIP P0-5240 Tri~p Status (SIG 2 Stmline Press PT-524)PS/534A 120 VAC IA Tricon 2 5 11 3501TN2 dPS534ATRIP PC-534A Tri Status (SIG 3 Stmline Press PT-534)PS/534C 120 VAC IA L Tricon 2 5 12 3501TN2 dPS534C TRIP P0-534C Trip Status (S/G 3 Stmline Press PT-534)PSI544A 120 VAC IA [ Tricon 2 5 13 3501TN2 dPS544A TRIP [PC-5ATrp Status (SIG,4Stmline Press PT-544) -PS/544C 120 VAC -IA Tricon 2 5 14 3501TN2 dPS544C TRIP .,P0-5440 Tri Status (S/G 4 Stmline Press PT-544)LS/529A 120 VAC IA Tricon 2 5 15 3501TN2 dLS529A TRIP LC-529ATrip Status (5/0 2 Level LT-529)LS/529B 120 VAC IA Tricon 2 5 116 3501TN2 dLS529B TRIP LC-529B Tdp Status (S/G 2 Level LT-529)LS/539A 120 VAC IA Tricon 2 5 17 3501TN2 dLS539A TRIP LC-539ATri Status (S/G3 Level LT-539)LS/539B 120 VAC IA Tricon 2 5 18 3501TN2 dLS539B TRIP LC-539B Trip Status (S/G 3 Level LT-539)PS/505A 120 VAC IA Tricon 2 5 9 3501TN2 dPS505ATRIP PC-505A Trp Status (Turb Impulse Press PT-50OS PC-505A By 120 VAC IATricon 2 5 213501TN2 dPC505ABYP Turbine Impulse PressureHighto P13Byass Switch TSI411D 120 VAC i II Tricon 3 5__ 1 3501 E dTS4l11D TRIP TC-411ID Trip Status (DTTA Loop 1)
PPS Interface Requirements Specification, Rev 9 Appendix 4.1_________________________
_________Sheet 5 of 9 PROTECTION SET I DISCRETE INPUTS ______ _______INSTRUMENT 
/SIGNAL TYPE iINST. CLASS_ PROCESSOR CHASSIS SL=OT F CH CARD TAGNAME CHANNEL FUNCTION ___________
TAG _- TYPE TS/411H I 120 VAC __ II Tricon F 3501E dPS411H TRIP TC-511C Trtp Status (DTTA Lompus PrssP_)S PS/505C 120 VAC II Tricon ____ 5_ 3 3501E dPS505H TRIP PC-505C Tdp Status DTTArb oopulePe)
T55 PS3N FAIL 15S 120 VAC ...II Tricon 3 5 4_ 3501E dPS3N FAIL 15 ClassIIAalg op oer Suppl PS3N Failure Relay PS5NFAIL_15 
! 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 15 Class II Analog Loop Power Supply PSSN Failure Relay PS2NFAIL_15 120 VAC II Tricon 3 5 6 3501 E dPS2N FAIL 15 Isolator Power Supply PS2N Failure Relay PS6N FAIL 15 120 VAC II Tricon 3 5 7_ 3501E dPS6N FAIL 1S Isolator PowerSupp/y PS6N Failure Relay _______...___ ......__.___ 120VAC II Tricon 3 5__ F 3501__ ___,___,_________________
11/12/2013
_______j-____
__________
___ ______ _______________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.1 T F TU UtI UU 1VU SIGNAL TYPE INST. CLASS i PROCESSOR CHASSIS SLOT CH CARD ITAGNAME (9) /CHANNEL FUNCTION TAG FM-414B 4-20 mA IA i Diverse-A A 1 -i 1 421 yFl414 A Reactor Coolant Flow Loop i to FI-414 (VB2) via FM-414B_1 (isolator)
FM-424B 4-20 mA __ IA 1 Diverse-A A 1 -2 421 _ yFl424 A_ Reactor Coolant Flow Loop 2t0 Fl-424 82) via FM-424B 1 (isolator)
TE-413A 4-20 mA ,BA,1 Diverse-A A 8 4211 yTE413AA ILoop 1 Hot Leg Temp (to PS1 Tncon)TE-413B 4-20 mA BA,1 Diverse-A A 8 23 421 yTE4138 A Loopl Cold Leg Temp (to PS1 Thcon) ________TE-410B 4-20 mA IA Diverse-A A 8 3 21 TE4108_A Loo 1lTcold-1 (to PSi Tricni TE-410A 4-20 mA IA Diverse-A A 8 4 421 yTE410A A DTTA Loop 1 Thot-lA (to PSl Tricon)TE-411A 4-20 mA IA ___ Diverse-A__
A 8 5 421 yTE4I1A A DTTA Loop _T~hot-2A to( PSI Tucon)TE-412A 4-20 mA IA Diverse-A A 8 6 -4,21-l yTE412A A DTTA Loop 1 Thot-3A (to PS1 Tricon)__FM-434B__
4-20 mA IA __ Diverse-B
__B 1 421 yFI434B RReactor Co0olant Flow Loop 3 to FI-434 (VB2) via FM-434B 1 (isolator)
FM-444B 4-20 mA IA ] Diverse-B
___B ___ 1 2 l 421 yFI44-4_B Reactor Coolant Flow Loop 4 to FI-444 C(VB2) via FM-444B 1 (isolator)
TE-423A _ 4-20 mA -IB,A,1 _Diverse-B B 8 1 -421 yTE423AB L~op 2Hot Leg Temp (to PSI Tuicon)TE-423B 4-20 mA IA Diverse-B
___B ___ 8 2 !421 yTE423B B Loop 2 Cold Leg Temp (to PSi Tdcon)TE-411B 4-20 mA IA Diverse-B
___B 8 3 i421 yTE411B 'B DTTA Loop 1 Tcold-2 (to PSi Tncon)TE-iO 4-0 A I __Diere-B
_-5 4 4,21 yTE411C B DTTA Loop 1 Thot-2B (to PS1 Tricon)TE-411C 4-20 mA IA Diverse-B
__B 8 6 421 TE1CB DALo 1Tht2toPiTcn TE-412C 4-20 mA IA Diverse-B B 8 6 41 yTE412C 'B DTTA Loop 1 Thot-3B (to P51 Tdicon)TM-413A 4-20 mA IBA,I i Tricon 1 _ 5 -1 3805HN yTR413 RED Loop 1 Hot Le Temp to TR-413 8V2, ERFDS 8V1) & RVLIS (PAM4)TM-423B 4-20 mA BA,1 Tricon 1 5 2 3805HN yTR4238BLU 
!Loop_2 Cold Leg Tem to TR-423 (VB82), ERFDS (VB1)FM-522D 4-20 mA IA (10) Tricon 1 ___ 5 3 3805HN yFI522 ILoop 2 Stmflow to FI-522 (VB3) & ERFDS (VB1) via FM-522_2 (Isolator)
FM-542D 4-20 mA IA (10) Tricon 1 5 4 3805HN yFI542 !Loop 4 Stmflow to FI-542 8V3) & ERFDS 8V4) via FM-542 2 (Isolator)
TM-413B 4-20 mA IB,A,1 -Tricon ___1 _ 6 1 3805HN yTR413 BLU Loop 1 Cold Leg Temp to TR-413 (VB82), ERFDS (VB11)TM-423A 4-20 mA IB,A,1 , Tricon 1 _ 6 2 3805HN yTR423 RED Loop 2 Hot Leg Temp to TR-423 (VB2), ERFDS (VB1) & RVLIS (PAM4)FM-512D 4-20 mA _.IA (10) i- Tricon 1 6 3 3805HN LoopI_ Stmflow to FI-51.2 (VB3) & E RFDS (.8)vi M5 2(l_&sect;olator)_ 
-FM-532D 4-20 mA IA (10) i Tricon 1 6 4 3805HN yFl532 Loop 3 Stmflow to Ft-532 (VB3) & ERFDS (VB4) via FM-532_2 (Isolator)
TM-411E 4-20 mA II -- Tricon __3 _ 2 1 3805E yTI411A Delta-T to TI-411A (VB2) & aTM411E (RN04A)TM-411F 4-20 mA II Tricon __3 _ 2 2 3805E yTI411B Overpower Setpoint to T/411A (CCl) &TI-411B (VB82)TM-41 1G 4-20 mA II Tricon _ 3 2 __3 3805E yTl4l11C O vertemp epin oT/41_ 1ACC1)&
TM-412F 4-20 mA I6 Tdlcon 3 2 4 3805E yTl412 Tavgl to TI-412 (VB82) & aTM412F (RN04A)PM-505A 4-20 mA II Tdcon 3 2 5 3805E yPt505 Turbine Impulse Pressure to P1-505 (V183)bM4Q 4-9fi B 3 6 ZR.LZ':Z!tERFDSM'JX01,A'!1) 
-LT-459 Input 4-20 mA IB,A,1I (7) N/A N/A N/A' N/A N/A _ PZR Level to -5A(2) LI-459A859_(HSP) 
-_ _LM-459 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 01 (V181)PM-455 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Pressure to PZR Pressure Control, PI-455A (VB82), PI-455B (HSP)FM-512_1 4-20 mA II Isolator Out N/A __ N/A N/A N/A _ N/A _L~o 1 Steamfiow to DFWCS FM-512 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop I Steamfiow to FI-512 (VB3) &ERFDS (VB81)FM-522 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamtlow to DFWCS FM-522 2 4-20 mA IB,D,2 Isolator Out N/A _N/A N/A N/A N/A Loop.#2Steamnflow to FI-5221yB3) 
& ERFDS (VB1)___________
FM-532 1 4-20 mA II Isolator Out N/A N/A N/A N/A --N/A Loop 3 Steamtlow to DFWCS FM-532 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to FI-532 (VB3) & ERFDS (V184)__FM-542_1
__4-20 mA II Isolator Out N/A N/A N/A iN/A N/A Loopp4 Steamitow to DFWCS FM-542 2 4-20 mA IBD,2 Isolator Out N/A N/A N/A N/A N/A Loop 4 Steamllow to FI-542 (VB83) & ERFDS (VB4)PT-514 Input 4-20 mA __IB,A,1 .... (7) N/A _N/A N/A N/A N/A L P 1 Steamline Press to PI-514A ('183), PI-5148_(HSP), ERFDS ('184)PM-514 1 4-20 mA II Isolator Out N/A N/A N/A /N/A N/A Loop t Steamline Pressure to DFWCS PT-524 Input 4-20 mA lB,A,1 (7) N/A N/A N/A N/A N/A LP 2Steamline Press to PI-524A (VB3), PI-5248 (HSP), ERFDS (V184)__PM-524 1 4-20 mA __ II Isolator Out N/A N/A N/A N/A N/A Loop2 Steamline Pressure to DFWCS PT-534 Input 4-20 mA lB,A,1 j7) N/A N/A N/A N/A -N/A LP 3 Steamline Press to PI-534A (VB3, P1-5348 (HSP), ERFDS 8V1)PM-534_1 4-20 mA II Isolator Out N/A N/A N/A /N/A N/A Loop 3 Steamline Pressure to DFWCS P54Int 4-0mBA7)N/A N/A N/A N/A N/A L P 4 Steamline Press to PI-544A 8V3), P1-5448 (.HSP), ERFDS (VB84)PM-544 1 4-20 mA II Isolator Out N/A N/A jN/A N/A N/A Loop 4 Steamline Pressure to DFWCS PPS Interface Requirements Specification, Rev 9 Appendix 4.1________________________________
__________
____________
______________________________________________________Sheet__
Sheto7of9 PROTECTION SET I ANALOG OUTPUTS_______
_______INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION TAG TP PM-505 1 4-20 mA ____II ____ solator Out N/A N/A N/A N/A N/A Turbine Imputse Pressure to AMSAC LM-529_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A SIG 2 Level to LI-529 (VB3), DFWCS, AFW_____LM-539 1 4-20 mA ____II __ Isolator Out N/A N/A N/A N/A N/A ISf0 3 Level to LI-539 (V3, OFWCS, AFW LM-539 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A iSf0 3 Level to AMSAC PT-937 Input 4-20 mA IBA,1 7) ~ N/A N/A N/A N/A N/A Containment Pressure to P1-937 VBi)FM-4148 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop ito FI-414 (B2)FM-424B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A ReactorCoolantFlow Loop 2 to FI--42, (VB2) -_________
FM-434B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 to FI-434 (B2)FM-444B_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 to FI-444 8V2)111/0311/12___
______________________2013_____________________________________________
PPS Interface Requirements Specification.
Rev 9 Appendix 4.1___________________________________
___ -___________
_____________________________Sheet_
Sheto8ff9 PROTECTION SET I DISCRETE OUTPUTS___
__ ___ _______________________________
INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE ITYPE UY-PS1A DIV-A II 125 VDC Diverse-A A 2 1/2 402 cPS1A DIV A PPS I Chassis A Trouble UY-PS1CDIV-A II 125 VDC Diverse-A i A 2 3/4 402 cPSlCDIV A PPS I Chassis A Failure UY-PS1B DIV-A II 125 VDC Diverse-A 
! A 2 5/6 402 cPS1B DIVA PPS I Chassis A Channel in Bypass UY-PS1DDIV-A II 125 VDC Diverse-A A 2 7/8 402 cPS1D DIV A PPSIlChassis AOut of Servtce FC-414 A IA 120 VAC Diverse-A A 9 1 402 cFC414_A Loop 1 Low Flow Rx Trip (SSPS)FC-424 A IA 120 VAC Diverse-A A -9 2 402 cFC424 A Loop 2 Low Flow Rx Trip (SSPS)FC-434_A __IA 120 VAC ___ Diverse-A A 9 3 402 cFC434 A Loop 3Low Flow Rx Trip(SSPS)
_______FC-444 A IA 120 VAC Diverse-A 9 4 402 cFC444 A Loop 4 Low Flow Rx Trip (SSPS)PC-455C A l IA 120 VAC Diverse-A A l9 5 402 cPC455C A PZR Pressure Low Rx Trip (SSPS)PC-455B A .___IA 120 VAC Diverse-A A [ 9 6 402 cPC455B A Unblock SI, P11 (SSPS _____PC-455A A IA 120 VAC Diverse-A A !9 7 402 cPC455A A PZR Pressure High Rx Trip (SSPS)PC-455D A IA 120 VAC Diverse-A 9 8 402 cPC455D A PZR Pressure Low-Low SI (SSPS)__PC-455E A IA 120 VAC (11) Diverse-A A 9- 9 402 cPC455E A PZR Pressure High -PORV (RNASA)PC-937B A IA 48 VDC Diverse-A A 9 11 402 cPC937B A Clint Press High-High Ctmt Spray. Ph B sIsn (SSPS)LOOP PULSE A II 48 VDC Diverse-A A 10 1 102 cPULSE A PPS IASstem Timebase Frame Rate Outpu~t UY-PS1A DIV-B II 125 VDC Diverse-B B 2 1/2 402 cPS1A DIV B PPS I Chassis B Trouble UY-PS1C DIV-B __II 125 VDC Diverse-B
_B 2 3/4 402 cPS1C DIV B PPS I Chassis B Failure UY-PS1B DIV-B II 125 VDC Diverse-B 8 2 5/6 402 cPS1B DIV B PPS I Chassis B Channel in Bypass UY-PS1D DIV-A II 125 VDC Diverse-B B 2 7/8 402 cPS1DDIV B PPS I Chassis B Out of Service FC-4t4 B IA 120 VAC Diverse-B B 9 1 402 cFC414 B Loop 1 Low Flow Rx Trip (SSPS)FC-424 B IA 120 VAC Diverse-B B 9 2 402 cFC424 B Loop 2 Low Flow Rx Trip (SSPS)__FC-434 B IA 120 VAC -__ Diverse-B B 9 3 402 cFC434 B Lop3 Low Flow Rx Trip SSPS)FC-444.B IA 120 VAC Diverse-B 
.....B ... 9 4 402 cFC~444B Loop 4 Low--FlIow Rx Trip (SSPS)PC-455C B IA 120 VAC Diverse-B 8 9 5 402 cPC455C B PZR Pressure Low Rx Trip (SSPS)PC-455BB _ IA 120 VAC Diverse-B 
... B. 6 402 _cPC455B B Unblock SI, P11 (SSPS)PC-455A B IA 120 VAC Diverse-B 1 B l 7 402 cPC465A B PZR Pressure High Rx Trip (SSPS)PC-455D B IA 120 VAC Diverse-B B _9 8 402 cPC455D B PZR Pressure Low-Low SI (SSPS)__PC-455E B IA 120 VAC (11) Diverse-B B 9 9 402 cPC455E B PZR Pressure High -PORV (RNASA)PC-937B B IA 48 VDC Diverse-B f B 9 11 402 cPC937B B Clint Press High-High Ctmt Spray. Ph B Isin (SSPS)LOOP PULSE B _ II 48 VDC Diverse-B B 10 1 _ 102 cPULSEB PPSLI B System Timebase Frame Rate Output TC-411G IA 120 VAC Tricon i 2 l6 1 3601TN cTC411G OPDT Rx Trip (SSPS)TC-412D __ IA 120 VAC Tricon t 2 1 6 2 3601TN cTC412D Tvyg_ Low-Low P12 (SSP TC-423A IA 120 VAC Tricon ; j6 3 3601TN cTC423A Loop 2 Cold Leg Temp. Low -LTOPS (RNASA)LC-529A IA 120 VAC Tricon 2 6 4 3601TN cLC529A S/G 2 Hi h-High Level Turbine Trip, FWlIsln P14 (SSPS)LC-539B IA 120 VAC Tricon 2 l 6 5 3601 TN cLC539B S/G 3 Low-Low Level Rx Trip & AFW Pump Start (SSPS)PC-505A IA 120 VAC Tricon 2 i 6 6 3801 TN cPC505A Turbine Impulse Pressure High to P13 (SSPS)PC-514C IA 120 VAC Tricon 2 6 7 3601TN cPC514C Lop Stmnline Press High Negative Rate Stln Isin (SSPS)PC-524A IA 120 VAC Tricon 2 6 8 3601TN cPC524A Loop 2 Low Stmline Press SI & Stmline Ilan (SSPS)PC-534C IA 120 VAC Tricon 2 6 9 3801TN cPC534C Loop 3 Stmline Press High Negative Rate Stmline Ilan (SSPS)PC-544A IA __ 120 VAC Tricon _2 6 10 3601TN __cPC544A__
Loop 4 Low Stmline Press SI & Stmaline lIin (SSPS)TC-4110 IA 120 VAC Tricon .2. 7 13601TN cTC4110 OTDT Rx Trip (SSPS)TC-412G IA 120 VAC Tricon _ 2 2. 7 2 3601TN cTC412G __Tavg LowFeedwater Isolation -___LC-459A IA 120 VAC Tricon 2 7 3 3601TN cLC459A PZR Level High Rx Trip (SSPS)LC-529B IA 120 VAC Tricon 2 L 7 4 3601 TN __ cLC529B S__ /G 2 Low-Low Leve Rx Trip & AFW Pump Start (SSPS)___LC-539A IA 120 VAC Tricon 2 --[7 5 3601TN cLC539A S/G03 High-High Level Turbine Trip, FW slan P14 (SSPS)PC-514A IA 120 VAC Tricon 2 2 -.... 6 3601TN cPC514A Loop 1 Low Stmntine Press SI & Stmnline sIsn (SSPS)PC-5240 IA_ 120 VAC Tricon 2 7 7 3601TN __cPC524C Loop 2 Stmline Press Hih Negative Rate Stmline Ilan (SSPS)PC54 I 2 VCT7cn2 -8 3601TN cPC534A Loop 3 Low Stmnline Press SI & Stmline Isin (SSPS)P0-544cP-50 IAA 1220 v~VAC Trrcon~rcn i 2 7 9 3601TN cPC544C Loop 4 Stmnlne Press High Negative Rate Stmaline slan (SSPS)LY-529H II 125 VDC Tricon ! 3 7 1 3636T cALM1465 PPS I S/G Low-Low Level TTD Timer Actuated Alarm PK0605 PPS Interface Requirements Specification.
Rev 9 Appendix 4.1 PROTECTION SET I DISCRETE OUTPUTS Set9o INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE TYPE UY-PS1A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1463 PPS I Trouble Alarm PK0604 UY-PS1B TRICON II 125 VDC Tricon 3 7 3 3636T cALM1464 PPS IChannel in Bypass Alarm PK(0602 UY-PS1C TRICON II 125 VDC Tricon 3 7 4 3636T cALM1462 PPS I Failure Aiarm PK(0601 TY-411 TRICON II 125 VDC Trdcon 3 7 5 3636T cALM1466 PPS I RTD Failure Alarm PK(0603 OOSITRICON II 125 VDC Tricon 3 7 6 3636T cALM0734 PPS I Channel OOS Alarm PK(0607 125 VDC Tricon 3 7 7 3636T Spare________125 VOC Tnlcon 3 7 8 3636T Spare PC-5050 II 120 VAC Tricon 3 7 14 3636T cPC505C Turbine Low Power Interlock CS (RNARA)TC--411D II 120 VAC Tricon 3 7 15 3636T cTC411D OTD3T Intedlock 03 (RNARA)TC-411H II 120 VAC Tricon 3 7 16 3636T cTC411H OPDT Interlock C4 (RNARA)11/12/2013
___
PFS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 1 of 9 LOTICHICARD tTAGNAME (5)TAG TYPE_TE-433A 200 OHM RTD lB,A,1 0 -700 &deg;F Diverse-A A -5 1 311 (w aTE433AA WR Tern Loop 3 Hot Leg (for RTD conversion to mA)TE--433B 200 OHM RTD IA 0 -700 0 F Diverse-A A 5 2 i311 (w)aTE433BA9 TepLo odLg(or RTD conversion to mA)TE-420B 200 OHM RTD IA 350- 650 =F Diverse-A A 5 3 l311 (w aTE420B A DTTA Loop 2 Tcold-1 (for RTD conversion to mA)TE-420A_ 200 OHM RTD IA _ 350 -650 0 F Diverse-A A 5 4 -31 (w)aTE420A A DTTA Loop 2 Thot-lA (for RTD conversion to mA) _TE-421A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 5 (w)aTE421A A DTTA Loop 2 Thot-2A (for RTD conversion to mA)TE-422.A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 6 311 (w~aTE422A A DTTA Loop 2 Thot-3A (for RTD conversion to mA)FT-415 14-20 mA (3)- IA 0 -100 XMTR d % Diverse-A A 6 1 321 IT.5DPA !Reactor Coolant Flow Loop 1 FT-425 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6- 2 321- (w)aFT425DP ARectr oolant Flow Loop 2 FT-435 J4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 i321 (w)aFT435DPA Reactor Coolant Flow Loop 3 FT-445 4-20 mA (3) IA 0 -100 XMTR dp% _Diverse-A A 6 4 32"1 (w)aFT445DP A Reactor CoolantFlow Loop PT-456 4-20 mA (3) IA 1250 -2500 psig Diverse-A A 6 5 /321 (w)aPT456 A PZR Pressure__PT-936 4-20 mA (3) IA 55 psig Diverse-A A 6 6 3_21_ (w)aPT936 AjContainment Pressure TE--443A 200 OHM RTD IBA1 0 -700 &deg;F Diverse-B B 5 1 311 (w)aTE443A B VWR Temp Loop 4 Hot Leg (for RTD conversion to mA)TE-443B -200 OHM RTD IBA,1 _ 0- 700 &deg;F Diverse-B B 5 2 311 B WR Temp Loo 44Cold Leg (for RTD~conversion tomA)TE.-421 B 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 3 311 (w)aTE421 BB DTTA Loop 2 Tcold-2 (for RTD conversion to mA)TE-420C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B 5 4 31 1 (w)aTE42OCB DTTA Loop 2 Thot-1 B (for RTD conversion to mA)TE-421C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 5 3t11 (w)aTE421C B DTTA Loop 2 Thot-_2B (for RTD conversion to mA_)TE-422C -I200 OHM RTD IA 350 -650 --&deg;F .... Diverse-B B 5 6 311 (w~aTE422C B DTTA Loop 2 Thot-3B (for RTD conversion to mA)FT-41 5 4-20 m A(3) IA 0 -100 XMTR dp% Diverse-B B 6 1 321 (w)aFT41 5DPB Reactor Coolant Flow Loop 1 FT-425 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 6 2 321 (w)aFT425DP B Reactor Coolant Flow Loop 2 FT-435 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B B 3 321 (w)aFT435DPB Reactor Coolant Flow Loop 3__FT-445 4-20 mA (3) IA__ 0 -100 XMTR dp% Diverse-B B 6 4 _321 (waFT445DPB Reactor Coolant Flow Loop 4 PT-456 4-20 mA (3) IA 1250- 2500 psij Diverse-B B 6 5 321 (w)aPT456 B PZR Pressure PT-936 4-20 mA (3) IA 55 psig Diverse-B B B 6 321 (w)aPT936 B Containment Pressure NE-42A 0-10 VDC IA 0 -120 %____ Tricon 1 2 1 3703EN (w)aNE42A DTTA Loop 2 Upper (Neutron)
Flux NE-42B 0-10 VDC IA 0 -120 % Tricon 1 2 2 3703EN (w)aNE42B DTTA Loop 2 Lower (Neutron)
Flux___TE-433A 4-20 mA (3) IBA,1 0 -700 &deg;F Tricon 1 -3 1 3721N (w aTE433A WR Temperature Loop 3 Hot Leg TE-433B ...4-20 mA (3)_ IB,A,1 0 -700 0 F Tticon 1 -3 2 3721N (w)aTE433B WR Temperature Loop 3 Cold Leg -TE-420B 4-20 mA (3) IA 510- 630 *F Tricon 1 3 3 3721N (w aTE4208 DTTA Loop 2 Tcold-1 TE-420A 4-20 mA (3) IA 530 -650 =F Tricon 1 3 4 3721 N (w)aTE420A DTTA Loop 2 Thot-lA TE-421A 4-20OmA (3) IA 530 -650 &deg;F Tricon 1 3 5 3721N (w)aTE421A DTTA Loop 2 Thot-2A TE-422A 4-20 mA 3) IA 530 -650 "F Tricon 1 3 6 3721 N (w aTE422A DTTA Loop 2 Thot-3A PT-456 4-20 mA(3, IA 1250 -2500 psig Tricon 1 3 7 3721 N (w)aPT456 DTTALoop 2 PZR Pressure FT-513 4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 3 8 3721N (w aFT513DP Loop 1 Steamflow_________________
_ 0 -4.5 MPPH Tticon 1 3 6 N/A rFT513 Loop 1 Steamflow Compensated
__FT-533 4-20_mA (3) IA 0 -100 _ XMTRd d% Tricon 1 ._3 ..... 9 3721N (w)aFT533DP Loop 3Steamtlow
____________________
0 -4.6 MPPH Trdcon 1 3 9 N/A rFT533 Loop 3 Steamfiow Cornpensated PT-515 4-20 mA (3) IA 0- 1200 ~psiL Tdcon 1 3 10 3721N (w)aPT515 Loop 1 Steamline Pressure PT-535 4-20 mA IA 0 -_1200 sig_ Tricon 1 3 11 3721 N (w)5PT535 Loop 3 Seamline Pressure LT-519 4-20 mA (3 IA 0- 100 %____ Tricon 1 3 12 3721N (w)aLT519 S/G 1 Level____Tricon 1 3 13 _ Spare__PT-SOB 4-20 mA (3) IA 0 -110 % Tdicon 1 3 3721 N (w)aPT506 ITurbine Impulse Pressure___________
__________Trcon 1 3 14 j3721N Spare TE-443A 4-20 mA (3) IA 0 -700 &deg;F Tticon 1 4 1 13721 N (w)aTE443A TWR Temperature Loop 4 Hot Leg TE-443B L4-20 mA (3) IB,A,1 0 -700 OF Trdcon 1 4 2 3721 N (w)aTE443B WR Temperature Loop 4 Cold Leg TE-421B 4-20 mA 3) IA 510 -630 0 F Tricon 1 4 3 3721N (w)aTE421B D0TTA Loop 2Tcold-2 -TE-420C 4-20 mA (3) IA 530 -650 0 F Tricon 1 4 4 3721 N (w)aTE420C DT3TAr L-oop 2 Thot-1lB TE-421C 4-20OmA (3 IA 530 -650 &deg;F Tticon 1 4 5 3721N (w)aTE421C DTTA Loop 2Thot-2B__TE-422C 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 4 6 3721N DTTA Lo 2 Thot-3B ____LT-460 4-20 mA (3) IA 0 -100 %____ Tricon 1 4 7 3721-N (w aLT460 PZR Level PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 2 of 9 PROTECTION SET II ANALOG INPUTS _________INSTRUMENT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG TYPE FT-523 4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 4 8 3721N (w)aFT523DP Loop 2 Steamfiow 0 -4.5 MPPH Tricon 1 4 8 N/A rFT523__ Loop 2 Steamfiow Compensated FT-543 i4-20 mA (3) IA 0- 100 XMTR dp% Tricon 1 4 9 3721N (w)aFT543DP Loop 4 Steamflow-T550 -4.5 MPPH Trdcon 1 4 9 N/A rFT543 Loop 4 Steamflow Compensated P%525___ 4-20 mA (3) IA 0 -1200 psi Tdicon 1 4 10 3721N (w)aPT525 Loop 2 Steamline Pressure PT-545 ,4-20 mA (3) IA 0 -1200 psig Tdicon 1 4 11 3721 N (w)aPT545 Loop 4 Steamline Pressure LT-5~49 -20_mA (3) IA 0- 100 % Trdcon 1 4 12 3721 N (w)aLT549 S/G 4 Level__ ___LM-460 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level FM-51 3 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A __Loop 1 Steamflow 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamfiow Compensated FM-523 1 20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A Loo 2 Steamfiow
______FM-523 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A -N/A I Loop 2 Steamfiow Compensated FM-533 1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A ILoop 3 Steamfiow FM-533 2 4-20 mA IA NA NA Isolator N/A __N/A N/A N/A N/A Loop 3 Steamflow Compensated FM-543_1 4-20 mA IA (2) NA NA Isolator N/A N/A N/A N/A N/A ILoop 4 Steamflow FM-543 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A ILoop 4 Steamflow Compensated PM-515_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1iSteamline Pressure PM-525_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Ioo0 2 Steamline Pressure PM-535 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A __Loop 3 Steamline Pressure PM-545 1 4-20 mA IA NA NA-- Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure LM-519 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-549_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A __S/G 4 Level LM-549 2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level PM-506_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Turbine Impulse Pressure PM-456 1 4-20 mA __IA __ NA NA Isolator N/A N/A N/A N/A PZR Pressure FM-41 5B 1 4-20 mA IA NA NA Isolator N/A N/A N/A lN/A N/A Reactor Coolant Flow Loop 1 Normalized FM--425B 1 4-20 mA IA NA NA Isolator -N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-435B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized 
-FM-445B_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 11!12/2013
_____ ____ ______________________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4,2 Sheet 3 of 9 PROTECTION SET II DISCRETE INPUTS [INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT iCH CARD TAGNAME CHANNEL FUNCTION TAG _________TYPE
_______ _____________
_________FC-415FB LSM A 48 VOC IA -Diverse-A 
-A -~302 dFC41 5LSMA Loop 1 Low Flow Rx Trip LSM A Feedback FC-425 FB LMA 48 VDC IA Diverse-A A 7 2 302 dFC425 LSMA Loop 2 Low Flow Rx Trip LSM A Feedback FC-435 FB LSM A 48 VDC IA__ _Diverse-A A -7I 3 302 dFC435_LSMA Lo~op 3 Low Flow Rx Trip LSM A Feedback FC-445 FB LSM A 48 VDC IA Diverse-A A 7 4 302 dFC445 LSMA Loop 4 Low Flow Rx Trip LSM A Feedback PC-4560 FR LSM A 48 VDC IA Diverse-A A 7 5 302 dPC456C LSMA PZR Press Low Rx Trp LSM A Feedback PC-456B FB LSM A 48 VDC IA __ Diverse-A A 7 6 302 dPC456B LSMA Unblock SI, P11 LSMA Feedback PC-456A FB LSM A L 48 VDC IA Diverse-A A 7 7 302 dPC458A LSMA PZR Press High Rx Trip LSM A Feedback PC-456D FB LSM A 48 VDC IA -Diverse-A A 7 8 302 dPC456D LSMA PZR Press Low-Low SI LSM A Feedback PC-456E FR LSM A 48 VDC IA Diverse-A A 7 9 302 dPC456ELSMA PZR Press Hi h -PORV LSM A Feedback PC-936A FR LSM A 48 VDC IA Diverse-A A___ 7 10 302 dPC936A LSMA Ctmt Press High (SI, Ph A Isln) LSM A Feedback PC-936BFBLSMA 48 VOC IA Diverse-A A _7J 11 302 dPC936B LSMA Ctint Press High-High (Clint Spray, Ph B slan) LSM A Feedback FC-415_Byp A 48 VDC IA Diverse-A A 7 -12 302 dFC415. RYPA Loop 1 Low Flow Rx Trip Byp A Switch Status FC--425_RypA 48 VDC IA -Diverse-A A 7 13 302 dFC425 RYPA Loop 2 Low Flow Rx Trip Byp A Switch Status FC-435 ypA 48 VDC IA Diverse-A A 7 14 302 dFC435_RYPA Loop 3 Low Flow Rx Trip BypA Switch Status FC-445_BypA 48 VDC IA Diverse-A A 7 15 302 dFC445 RYPA Loop 4 Low Flow Rx Trip Byp A Switch Status P0-4580_BypA I 48 VDC IA Diverse-A A -7 16 302 dPC456C RYPA PZR Press Low Rx Trip Byp A Switch Status PC-456BBypA 48 VDC IA Diverse-A A 7 17 302 dPC456BRYPA Unblock Si, P11 B} A Switch Status__PC-456ABypA 48 VDC IA Diverse-A A 7 18 302 dPC456A RYPA PZR Press High Rx Trip Byp A Switch Status PC-456D Byp A 48 VDC IA __Diverse-A A 7 19 302 dPC456DBYPA PZR Press Low-Low SI yp. A Switch Status PC-455EBRpA 48 VDC IA Diverse-A A 7 20 302 dPC456E BYPA PZR Press High -PORV Byp A Switch Status PC-936AB A 48 VDC IA Diverse-A A 21 302 dPC936A BYPA Ctmnt Press High (SI, Ph A sIsn) Byp A Sw Status__PC-936B ByJoA ....48 VDC IA _ Diverse-A A 22 302 dPC936BBYPA
_Cltmt Press High-High (Ctint SpaP Bl)B~ypA Sw Status PS3FAIL IIA 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IIA ALS-A Chassis Power Supply 1 Failure (+48VAi PS6FAILIIA i 48 VDC IA Diverse-A A 25 302 dPS6FAILIIA ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAIL IIA 48VDC IA Diverse-A A 7 26 302 dPS1FAJL IIA Analog InputLoop Power Suppl 1 Failure PS4FAIL ItA 48 VDC IA Diverse-A A 7 27 302 dPS4FAIL IIA Analog Input Loop Power Supply 2 Failure PS2FAIL.JIA 48 VDC ___IA Diverse-A A 28 302 dPS2FAILIIA ALS Contact Wetting Supply 1 Failure PS5FAILIIA 48 VDC IA Diverse-A A 7 29 302 dPS5FAIL IIA ALS Contact Wetting Supply 2 Failure- ...........
PPS II AlarmClearA i48 VDC IA Diverse-A A 10 1 102 dALMCLR IIA PPS II AAlarinClear Switch Status PPS II TAR 48 VDC IA Diverse-A A 10 2 102 dTABSTAT-8A PPS II A TAB Enable Status __FC-41 5_FRLSMB 48 VDC IA -Diverse-B B -7 1 302 dFC415 LSMB Loop 1 Low Flow Rx Trip LSM B Feedback FC-425 FR LSM 8 48 VDC IA Diverse-B
__B 7 2 302 dFC425 LSMB -Loop 2 Low Flow Rx Trip LSM B Feedback FC-435_FBLSMB 48 VDC IA Diverse-B B 7 3 302 dFC435_LSMB Loop 3 Low Flow PRx Trip LSM B Feedback FC-445 FR LSM B 48 VDC IA Diverse-B
__B 7 4 _302 dFC445_LSMB Loop 4 Low Flow Rx Trip LSM B Feedback ___ ___P0-4560 FR LSM B 48 VDC IA Diverse-B B 7 5 302 dPC456C LSMB PZR Press Low Rx Trip LSM B Feedback PC-456B FR LSM .B 48 VDC IA Diverse-B B 7 8 302 dPC456B LSMB Unblock SI, P11 LSM B Feedback PC-4565A FB LSM 1& 48 VDC IA Diverse-B B _7 ;7 302 dPC456ALSMB PZR Press HihRxTi LSM B Feedback PC-456D FR LSM B1 48 VDC IA Diverse-B B 7 8 302 dPC456D LSMB PZR Press Low-Low SI LSM B Feedback PC-456E FR LSM B 48 VDC IA Diverse-B B -71 9 302 dPC456E LSMB PZR Press High -PORV LSM B Feedback PC-936A FR LSM B 48 VDC -IA Diverse-B B 7 10 302 dPC936A LSMB Ctmnt Press High (Si, Ph A slan) LSM B Feedback Pc-g36BFB LSM B 48 VDC IA Diverse-B
__B 7 11 302 dPC936B LSMB Clint Press High-High (Cltmt Spray, Ph B Isin) LSM B Feedback FC-4l5_BypB 
] 48 VDC IA Diverse-B B -7 12 302 dFC415.-BYPB Loop 1 Low Flow Rx Trip Byp B Switch Status FC-425_Byp.
B 48 VDC IA __ Diverse-B
__B 7 13 302 dFC425_BYPB Loop0 2 Low Flow RxTripByp B Switch Status ___FC-435_Byp B 48 VDC IA Diverse-B
__B 7 14 302 dFC435 BYPB Loop 3 Low Flow Rx Trip Byp B Switch Status FC-445_Byp B 48 VDC IA Diverse-B B -7 15 302 dFC445_BYPB Lo 4 Low Flow Rx Trip B B Switch Status P0-4560 By/p B -48 VDC IA Diverse-B
__B 7 16 302 dPC456C BYPB PZR Press Low Rx Trip Byp B Switch Status P0-456BBypB 
-48 VDC IA Diverse-B
__B -7 17 302 dPC456B BYPB Unblock SI, P11 Byp B Switch Status PC-456ABypB 
-48 VDC IA Diverse-B
__B -7 18 302 dPC456A BYPB P'ZR Press High Rx Trip _Byp B Switch Status PC-456DBypB 48 VDC IA Diverse-B B 7 i19 302 dPC456D BYPB PZR Press Low-Low SI Byp B Switch Status PC-456EBypB 
-48 VDC IA Diverse-B B 7 /20 302 dPC456E BYPB PZR Press High -PORV Byp B Switch Status PC-936AByp B -48 VDC IA __ Diverse-B B 7t 21 302 dPC936ABYPB CtmtPress igh (Si, Ph A Ilan) BypB Sw Status P0-936BBypB 48 VDC IA Diverse-B B 7 -22 302 dPC936B BYPB Clint Press High-High (Ctmnt Spray, Ph B Isin) Byp B Sw Status PS3FAIL lIB 1 48 VDC IA Diverse-B i B 7 24 -302 dPS3FAI"L._lB ALS-A Chassis Power Supply 1 Failure (+48VA)
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 4 of 9 PROTECTION SET nI DISCRETE INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE PS6FAIL 11B 48 VDC IA Diverse-B B 7 25 302 dPS6FAIL lB ALS-A Chassis Power Supply 2 Failure (+48VB)PSIFAJLIIB 48 VDC IA -Diverse-B B 7 26 302 dPS1 FAIL 1IB Analo InputLoop Power Suppl 1 Failure PS4FAIL lIB 48 VDC IA Diverse-B B 7 27 302 dPS4FAIL 1iB Analo Input Lao Power Supy 2 Failure PS2FAtL lIB 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL 1iB ALS Contact Wetting Supl 1 Failure PS5FAIL lIB 48 VDC IA -Diverse-B B 7 29 302 dPS5FAILIIB ALS Contact Wetting SuppI 2 Failure PPS II Alarm Clear B 4B VDC IA Diverse-B B 10 1 102 dALMCLRI1B PPS II_B A~larm Clear Switch Status PPS II TAB StatusBj 48 VDC IA Diverse-B B 10 2 102 dTABSTAT_118 PPS lIIB TAB Enable Status LP2_DTTAOOS 24 VDC IA Tricon 2 -2 1 3503EN2 dL2_DTTA OOS DTTA Loop 2 Ch. OOS Switch LP2_TTD OOS -24 VDC IA Tricon 2 2 2 3503EN2 dL2 TTD OOS TTD Laoo 2 Ch. OOS Switch T433A OOS 24 VDC IA Tricon 2 --2 3 3503EN2 dT433A OOS Loop 3 WR That Oh. OOS Switch T433B OOS -24 VDC IA Tricon 2 2 4 3503EN2 dT433B OOS Laoo 3 WR Tcold Oh. OOS Switch T443A OOS -24 VDC IA Tricon 2 -2 5 3503EN2 dT443A 00S Laoo 4 WR That Oh. OOS Switch T443B OOS -24 VDC IA Tricon 2 -2 6 3503EN2 dT443B OOS Laoo 4 WR Tcald Ch. DOS Switch L460 DOS -24 VDC IA Tricon 2 2 7 3503EN2 dL460 DOS PZR Level Oh. OOS Switch F513 OOS 24 VDC IA Tdicon 2 2 8 3503EN2 dF513 OOS Laoo 1 Steamfiow Ch. OOS Switch F53DOS 24 VDC IA Tricon 2 2 9 3503EN2 dF523_DOS Loop 2 Steamfiow Ch. OOS Switch F533 OOS 24 VDC IA Tricon 2 ~2 10 3503EN2 dF533 DOS Laoo 3 Steamfiow Oh. OOS Switch F543 OOS 24 VDC IA Tricon 2 2 11 3503EN2 dF543_OOS Loop 4 Steamfiow Ch. OOS Switch P515 OOS -24 VDC IA Tricon 2 2 12 3503EN2 dP515 OOS Laoo 1 Steamline Pressure Ch. OOS Switch P525_OOS -24 VDO IA Tricon 2 2 13 3503EN2 dP525 DOS Laoo 2 Steamline Pressure Oh. OOS Switch P535 OOS 24 VDC IA Tricon 2 2 14 3503EN2 dP535 OOS La Steamline Pressure Oh. OOS Switch P545 DOS -24 VDC IA Tricon 2 2 15 3503EN2 dP545 OOS Loop 4 Steamline Pressure Oh. 005 Switch L519_OOS 24 VDC IA Tricon 2 2 16 3503EN2 dL519_OOS SIG 1 Level Oh. OOS Switch L549 00OS 24 VDC IA Tricon 2 2 17 3503EN2 dL549_OOS S/G 4 Level Oh. OOS Switch P506_OOS 24 VDC IA Tricon 2 2 -18 3503EN2 dP506 OOS Turbine Impulse Pressure Oh. OOS Switch PS2SFAIL_16 24 VDC IA Tricon __2 2 19 3503EN2 dPS2SF'AIL 16 Analog Loop Ipt)PwrSuppl PS2S Failure Relay_____
PS7S FAIL 16 24 VDO IA Tricon 2 2 20 3503EN2 dPS7S FAIL 16 Analog Laop Input) Power SuppI PS7S Failure Relay PS3S FAIL_16 24 VDC IA Tricon 2 2 21 3503EN2 dPS3S FAIL 16 Discrete Loop (Input) Power Suppl PS3S Failure Relay PS6S FAIL_16 24 VDC IA Tricon __2 2 22 3503EN2 dPS6S FAIL 16 Discrete Loop (Input) Power Supply PS6S Failure Relay PS4S FAIL 16 24 VDC IA Tricon 2 2 23 3503EN2 dPS4S FAIL_16 Analog Loop Output) Power Suppl PS4S Failure Relay PS5S FAIL 16 24 VDC IA Tricon 2 2 24 3503EN2 dPS5S_FAIL 16 Analog Laoo (Output) Power Suppl PS5S Failure Relay 24D1_PWR 16 24 VDC IA Tdicon 2 2 25 3503EN2 d24Dt PWR 16 Lass of Power to Digtat Input Card TS/421C 120 VAC IA Tncon 2 5 1 3501TN2 dTS421C_TRIP TC-421C Trip Status (DTTA Loop2 2-TS/421G 120VAO IA Tricon 2 5 2 3501TN2 dTS421G TRIP TO-421G Trip Status (DTTA Loop 2)TS/422D 120 VAC IA Tricon 2 5 3 3501TN2 dTS422D TRIP TC-422D Tri Status (DTTA Laoo 2)TS/422G 120 VAC IA Tricon 2 5 4 3501TN2 dTS422G TRIP TO-422G Tnip Status (DTTA Laoo 2)TC433A 120 VAC IA Tricon 2 5 5 3501TN2 dTC433ATRIP TC-433A Tri Status (WR Temp TE-433B)LS/460A 1 120 VAC IA Tdicon 2 5 6 3501TN2 dLS460A TRIP LC-460A Tri Status (PZR Level LT-460)PS/515A 120 VAC IA Tricon __2 __ 5 7 3501TN2 dPS515A TRIP P0-51 5A Trip Status (SIG 1 Steamline Press PT-515) _PS/5150C 120 VAC IA Tnicon 2 5 B 35-01TN2 dPS515C TRIP PC-515COTrip Status (S/GO1 Steamline Press PT-515)PS/525A 120 VAC IA Tricon 2 5 9 3501TN2 dPS525A TRIP PC-525A Trip Status (S/G 2 Steamnline Press PT-525)PS/525C 120 VAC IA Tnicon __2 5 10 3501TN2 dPS525OTRIP P0-5250 Trip Status (SIG 2 Steamline Press _PS/535A -120 VAC IA Tricon 2 5 11 3501TN2 dPS535A TRIP PC-535A Tri Status (S/G 3 Steamline Press PT-535)PS/535C 120 VAC IA Tnicon 2 5 12 3501TN2 dPS535CTRIP P0-5350 Trip Status (SIC 3 Steamnline Press PT-535)PS/545A -120 VAO IA Tricon 2 5 13 3501TN2 dPS545ATRIP PC-545A Tdi Status (SIC 4 Steamline Press PT-545)PS/545C 120 VAC IA Tnicon 2 5 14 3501TN2 dPS545CTRIP PC-5450 Tri Status (SIG 4 Steamline Press PT-545)LS/519A 120 VAC IA Tricon 2 _ 5 15 3501TN2 dLS519A TRIP LO-519A Trip Status (GIG 1 Level LT-519)LSI519B 120 VAC IA Tricon 2 5 16 3501TN2 dLS519BTRIP LC-519B Trip Status (SIG 1 Level LT-519)LS/549A 120 VAC IA Tricon 2 5 17 3501TN2 dLS549A TRIP LC-549A Tri Status (SIG 4 Level LT-549)LS/549B 120 VAC IA Tricon __2 5 18 3501TN2 dLS549B TRIP LC-549B Trip Status (GIG 4 Level LT-549)PS/506A 120 VAC IA Tricon 2 5 19 3501TN2 dPS506A TRIP PO-506A Trip Status (Turb Impulse Press PT-506)PC-506A =Bp 120 VAC IA Tricon 2 5 21 3501TN2 dPC506ABYP Turbine Impulse Pressure High to P138 yass Switch PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 5 of 9 PROTECTION SET II DISCRETE INPUTS INSTRUMENT 
[ SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE TS/421D 120 VAC II Tricon 3 5 1 3501E dTS421D TRIP TC-421D Trip Status (DTTA Loop 2)TS/421H 120 VAC II Tricon 3 5 2 3501E dTS421H HTRIP rC-421H Trip Status (DTTA Loop 2)PS3N FAIL 16 120 VAC II Tricon 3 5 4 3501 E dPS3N FAIL 16 Class II Analog Loop Power Supply PS3N Failure Relay PS5N FAIL 16 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 16 Class II Analog Loop Power Supply PS5N Failure Relay PS2N FAIL 16 120 VAC II Tricon 3 5 6 3501E dPS2N FAIL 16 Isolator Power Supply PS2N Failure Relay PS6N FAIL 16 120 VAC II Tricon 3 5 7 3501E dPS6N FAIL 16 Isolator Power Supply PS6N Failure Relay 11/12/2013
___________
______ ___ _________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 6 of 9 I 1 ~ 1 rI Ct.+ l OC I n UU I I'U I  Ik I I,4O I flUIVI INP I ] 1 3 I T r"1 f l. I.,L.M rKLA,~~UNI 
~MA~I~ I ~LUI J ~M LANU I t}
UN[I. UN TYPE 1 I 1 1 t I T I 1 I r M-4100 0t 4-zu mA IA, Ulverse-A A 1 1 421 vF-I415 A Reactor Coolant Flow Loop 1 to FI-415 (VB82) via FM-415B1 (Isolator)
Reactor Coolant Flow Loon 2 to FI-42C (VR21 vin FM--4PRR 1 FM-425B 4-20 mA IA Diverse-A A 1 2 421 vFl425 A TE-433A 4-20 mA f BA,1 Diverse-A A 8 1 421 y'TE433A A Loop 3HotbL............
r ........ ........... 
.% ........ /gTemp (to PS2 Tncon)I =431: 4-20 mA IA TE-420B 4-20 mA TE-420A 4-20 mA IA IA IA IA Diverse-A Diverse-A Diverse-A Diverse-A Diverse-A k IA 8 3 421 yTE420B A DTTA Loop 2 Tcold-1 (to PS2 Tdicon) ___A 8 4______ 421_____ yTE20_ADTA Lop2 ho-l (t P2 rion A 8 1 45 421 j yTE421A A DTTA Loop 2 Thot-2A (to PS2 Tricon)A 8 2 421 vTE433B A Loon 3 Cold Len Temo (to PR2 Tdonnnt TE-421A 4-20 mA TE-422A 4+,;k A 8 C 421 I vTF422A A r')TTA I nnn 2 Thnt-3A (tn PR9 Tritnnn,... ......... 
.. ..=-4 ... 4 ,.... ......-,. .. ..k......~*-~- 
~ --' -...- -... L _FM-435B FM-445B Diverse-B B 1 I 1 I 421 yFI435_B Reactor Coolant Flow Loop 3 to FI-435 (VB2) via FM-435B 1 (Isolator)
Diverse-B B 1 I 2 I 421 TE-443A 4-20 m,.yFI445 B Reactor Coolant Flow Loop 4 to FI-445 (VB2) via FM-445B 1 (Isolator)
____yTE443AB Loop 4 Hot Leg Temp (to PS2 Triconl B 8 I 1 I 421 TE-443B 4-20 m+TE-421 B TE-420C 4-20 mA 4-20 mA IA TE-421C J 4-20 mA L IA TE-422C I 4-20 mA IA Diverse-E B '421 -TE443B B Loop 4Cold Le Temp to PS2 Tricon)B 8 3 421 -yTE421 B B DTTA Loop 2 Tcold-2 (to PS2 Tricon)B 8 5 421 -yTE42ICB DTTA Loop 2 Thot-2B (to PS2 Tricon)B 8 6 421 -yTE422C B DTTA Loop 2 Thot-3B (to PS2 Tricon)1 5 1 3805HN yTR433 RED Loop 3 Hot Leg Temp to TR-433 (VB2), ERFDS (VB1) & RVLIS (PAM3) -___1 5 _ 2 3805HN yTR443 BLU Loop 4 Cold Leg Temp to TR-443 8%t2), ERFDS 8V1)1 __ 5 3 3805HN 1F523 Loop 2 Steamfiow to FM-523_2 (Isolator)
TM-433AI 4-20_ mA IBA,1 Trio TM-443B 4-20 mA IB,A,1 Tricon FM-523D 4-20 mA IA Tricon FM-543D 4-20 mA+ -.IA Tricon Tricon 1 1 5 4 3805HN I yFI543 Loop 4 Steamfiow to FM-543 2 (Isolator)
--- 4 T M-433Bz 4-20 mA IBA.1 A 1 3Rf>+ltJIH vTPA33.' RIlI tnon 3 C+nId I Tnrmn In TlPA5:1 O/P/9\ 1:u1r:1c  TM-443A 4-20 mA BA,1 Tricon __I 6 2 3805HN yTR443 RED Loop 4 Hot Leg Temp to TR-443 (VB82), ERFDS (VB61) & RVLIS (PAM3)FM-513D 4-20 mA IA Tricon 1 6 3 3805HN yF1513 Loop 1 Steamfiow to FM-'513 2 (Isolator)
FM-533D 4-20 mA IA Tricon __1 ~ 6 4 3805HN yFI533 Loop 3 Steamflow to FM-533 2 (Isolator)
TM-421E 4-20 mA ___II __ Tricon 3 2 1 3805E yTI421A Delta-T to Tl-421A (VB2) & aTM421E (RN04A)TM-421F 4-20 mA II ___ Tricon 3 2 2 3805E yTI421B Overpower Setpoint to T/411A (CCl) &TI-421B (VB2)TM-421G 4-20OmA I1 Tricon 3 2 3 3805E yTI421C iOvertemp Setpoint to T/411A (CC1) & TI-421C 8V2)TM-422F 4-20 mA II Tricon 3 2 4 3805E yTI422 iTavg to TI-422 (VB2) & aTM422F (RN04A)PM-506A 4-20 mA II Tricon 3 -2 5 3805E yPI506 ITurbine Impulse Pressure to P1-506 VB3)LM-M48 4-2~-0-A B, Thei 8, 2 _____ ..-LT-460 Input 4-20 mA BA,1 (7) N/A N/A N/A N/A N/A iPZR Level to LI-460A (VB2), LI-460B (HSP)LM-460 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 02 (VB1'PM-456_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Pressure to P1-456 (VB82), PZR Pressure Control (Control Set 1)FM-513 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 1 Steamflow to DFWCS FM-513_2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 1 Steamflow to FI-513 (VB63) & ERFDS (VB81)FM-523 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamflow to DFWCS FM-523 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamfiow to FI-523 (VB83) & ERFDS (VB1)FM-533_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to DFWCS FM-533_2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamfiow to FI-533 (VB63) & ERFDS (VB84)FM-543 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A ;Loop 4 Steamfiow to DFWCS FM-543 2 4-20 mA IB,D,2 Isolator Out N/A N/A N/A N/A N/A Loop 4 Steamflow to FI-543 (VB3) & ERFDS (VB84)PT-515 Input 4-20 mA lB,A,1 (7)~ N/A N/A N/A N/A N/A Loop 1 Steamline Pressure to PI-515 8V3), ERFDS VB4)PM-515 1 4-20 mA II Isolator Out N/A [N/A N/A N/A N/A Loop 1 Steamline Pressure to DFWCS PT-525 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Loop2 Steamline Pressure to PI-525 (VB3), ERFDS (VB81)PM-525 1 4-20 mA II Isolator Out N/A LN/A N/A N/A N/A Loop 2 Steamline Pressure to DFWCS PT-535 Input 4-20 mA lB.A,1 (7 N/A N/A N/A N/A N/A Loop 3 Steamline Pressure to PI-535 (VB83), ERFDS (VB81)PM-535_ I 4-20 mA II Isolator Out N/A N/A IN/A N/A N/A___L.oop 3 Steamline Pressure to DFWCS Inon 4 Atnnnmlino=
In (11P31 cI=:ne 0 mA IB.A 1 (7'N/A N/A IN/A IN/A 0 mA II Isolator Out N/A L~ N/ N/ N/ N/ i~o 4 taln Pressure to DFWCS ___
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 7 of 9 PROTECTION SET It ANALOG OUTPUTS INSTRUMENT SIGNAL TYPE INST. CLASS IPROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION _______________
TAG ____ _____TYPE_____________
____________
LM-519 1 4-20 mA II ___ Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to LI-519 (VB39, DFWCS, AFW ____________
LM-549 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to LI-549 (VB3), DFWCS, AFW LM-549_2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to AMSAC PT-936 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Corntainment Pressure to PI-936 CVB1), ERFDS (/B1)PM-506_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Turbine Impulse Pressure to AMSAC FM-415B 1 4-20 mA II Isolator Out N/A N/A N/A N/A ___ N/A Reactor Coolant Flow Loopo ito FI-415 (VB2)FM-425B 1 4-20 mA j II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 to F1--425 (VB2)FM-435B 1 4-20 mA II 7 Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 to FI-435 (VB2)FM-445B 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 1 to FI-445 (VB2) ________ ___11/12/2013 J _______ _____________
____ ___
PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 8 of 9 PROTECTION SET II DISCRETE OUTPU"-~ ...~.. --INSTRUMENT i INST. CLASS I O I"(tUIA I IUrN I'U~L;-URK IL; I U;AhU I L, 11I'JNNcL IUNL I IUN TAG VOLTAGE ITYPE UY-P2AIV-
____ 25 VC Dvere-A A 2- 1/ 40 cP2A IV PPSII hasis Trubl UY-PS2CDIV-A II -125 VDC Diverse-A A 2 3/4 402 cPS2C.ADIV A PPS II Chassis A Failure UY-PS2BDIV-A II125 VDC Diverse-A A 2 3/6 402 cPS2B DIV A PPS II Chassis A Channinupr s UY-PS2D.,DIV-A II125 VDC Diverse-A A 2 7/8 402 cPS2D DIV A PPS II Chassis A Out of Service FC-41 S A IA 120 VAC Diverse-A A 9 1 402 cFC41 5 A Loop 1 Low Flow Rx Trip (SSPS)FC-425 A IA 120 VAC Diverse-A A 9 2 402 cFC425_A Loop 2 Low Flow Rx Trip (SSPS)FC-435 A IA 120 VAC Diverse-A A 9 3 402 cFC435 A Loop 3 Low Flow Rx Trip (SSPS)FC-445 A IA 120 VAC Diverse-A A 9 4 402 cFC445 A Loop 4 Low Flow Rx Trip (SSPS)PC-456CA IA 120 VAC Diverse-A A 9 5 402 cPC456C A PZR Pressure Low Rix Trip (SSPS)PC-456B A IA 120 VAC Diverse-A A 9 6 402 cPC456B A Unblock SI, P11 (SSPS)PC-456A_A IA 120 VAC Diverse-A A -9 7 402 cPC456A_A PZR Pressure High Rx Trip (SSPS)PC-456D A IA 120 VAC Diverse-A A 9 8 402 cPC456D A PZR Pressure Low-Low SI (SSPS)PC-456E A IA 120 VIAC (11) Diverse-A A 9 9 402 cPC456E A PZR Pressure High -PORV (RNASA)PC-936A A IA 120 VAC Diverse-A A 9 _10 402 cPC936AA Ctmt Press High SI, Ph A Isin (SSPS)PC-936B A IA 48 VDC Diverse-A A -9 11 402 cPC936B A Ctmt Press High-High Ctmt Spray, Ph B sIln (SSPS)LOOP PULSE A II 48 VDC Diverse-A A 10 1 102 cPULSEA PPS IIA System Timebase Frame Rate Output UY-PS2A DIV-B II 125 VDC Diverse-B B 1/2 402 cPS2A DIV B PPS II Chassis B Trouble UY-PS2CDIV-B II 125 VDC Diverse-B B __ 2 3/4 402 cPS2C DIV B PPS II Chassis B Failure UY-PS2B DIV-B II 125 VDC Diverse-B B 2 _5/6 402 cPS2B DIV B PPS II Chassis B Channel in Bypass UY-PS2D DIV-B II 125 VDC Diverse-B B -2 7/8 402 cPS2D DIV B PPS II Chassis B Out of Service FC-45 5B IA 120 VAC Diverse-B B -9 _ 1 402 cFC415 B Loop 1 Low Flow Rx Trip (SSPS)FC-425 B IA 120 VAC Diverse-B B -9 2 402 cFC425 B Loop 2 Low Flow Rx Trip (SSPS)FC-435 B IA 120 VAC Diverse-B B 9 3 402 cFC435 B Loop 3 Low Flow Rx Trip (SSPS)FC-445 B IA 120 VAC Diverse-B B -9 4 402 cFC445 B Loop 4 Low Flow Rx Trip_ (SSPS)PC-456C B IA 120 VAC Diverse-B B 9 5 402 cPC456C B PZR Pressure Low Rx Trip (SSPS)PC-458B B IA 120 VAC Diverse-B B 9 6 402 cPC456B B Unblock SI, P11 (SSPS)PC-456A B IA 120 VAC Diverse-B B -9 7 402 cPC456A B PZR Pressure High Rx Trip (SSPS)PC-456D B IA 120 VAC Diverse-B B 9 8 402 cPC456D B PZR Pressure Low-Low SI (SSPS)PC-456E B IA 120 VAC (11) Diverse-B B -9 9 402 cPC456E B PZR Pressure High -PORV (RNASA)PC-936A B IA 120 VAC Diverse-B B 9 10 402 cPC936A B Ctmt Press High SI, Ph AlsIn (SSPS)PC-936B B IA 48 VDC Diverse-B B -9 11 402 cPC936BB Ctmt Press High-High Ctmt Spray, Ph B Isin (SSPS)LOOP PULSE B II 48 VDC Diverse-B B 10 1 102 cPULSE B PPS lIB System Timebase Frame Rate Output TC-421G IA 120VAC Tricon __2 6 1 3601TN cTC421G OPDT Rx Trip (SSPS)TC-422D IA 120 VAC Tricon __2 6 2 3601TN cTC422D Tavg Low-Low P12 (SSPS)TC-433A IA 120 VAC Tricon __2 -6 3 3601TN cTC433A Loop 3 Cold Leg Temp. Low -LTOPS (RNASA)LC-519A IA 120 VAC Tricon 2 6 4 3601TN cLC519A S/G 1 High-High Level Turbine Trip, FW sIsn P14 (SSPS)LC-549B IA 120 VAC Tricon 2 6 5 3601TN cLC549B S/G 4 Low-Low Level Rx Trip & AFW Pump Stari (SSPS)PC-506A IA 120 VAC Tricon __2 6 6 3601TN cPC506A Turbine Impulse Pressure High to P13 (SSPS)PC-5I1SC IA 120 VAC Tricon 2 6 7 3601TN cPC515C Loop 1 Stmline Press High Negative Rate Stmline Isin (SSPS)PC-525A IA 120 VAC Tricon 2 6 8 3601TN cPC525A Loop 2 Low Stmline Press SI & Stmline sIsn (SSPS)PC-535C IA 120 VAC Tricon 2 6 9 3601TN cPC535C Loop 3 Stmline Press High Negative Rate Stmline sIsn (SSPS)PC-545A IA 120 VAC Tricon 6 10 3601TN cPC545A Loop 4 Low Stmline Press SI & Stmline sIsn (SSPS)TC-421C IA 120 VAC 120 VAC Tricon 2 711 3601TN cTC421C 0101 Rx Trip (SSPS)TC-422G IA Tricon 2 LC-460A 2 IA 120 VAC Tdicon 2 01TN cLC460A 4PZR Level High Rx Trip (SSPS)LC-5 19B IA 120 VAC Tricon 2 Tricon 2 7 7 4 3601TN 5 3601Tk cLC519BB cLC549A S/G 1 Low-Low Level Xx Tdio & AFW Pumo Start ('SSP-SI LC-549A IA 120 S/G 4 Hiah-Hiah Level Turbine Trio. FW sIsn P14 fSSPSI PC-515A IA 120\PC-525C IA 120 'v 6 3601TN cPC515A Loop 1 Low Stmline Press SI & Stmline Isin (SSPS)7 3601TN cPC525C Loop 2 Stmline Press High Negative Rate Stmline sIln (SSPS)8 3601TN cPC535A Loop 3 Low Stmline Press SI & Stmline lIsn (SSPS)9 3601TN cPC545C Loop 4 Stmline Press High Negative Rate Stmline Isin SSPSI PC-535A IA 120 VAC 7 7 PG-.E45C IA 120 VAC PC-FAriC IA I 2fl VAC --I-PPS Interface Requirements Specification, Rev 9 Appendix 4.2 Sheet 9 of 9 PROTECTION SET UI DISCRETE OUTPUTS INSTRUMENT INST. CLASS NTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE TYPE _____________________
LY-519H II 125 VDC Tdcon 3 7 1 3636T cALM1470 PPS IIS/G Low-Low Level TTD Timer Actuated Alarm PK0605 UY-PS2A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1468 PPSllITrouble Alarm PK(0604 UY-PS2BTRICON II 125 VDC Tricon 3 7 3 3636T cALM1469 PPS II Channel in Bypass Alarm PK0602 UY-PS2C_TRICON II 125 VD3C Tricon 3 7 4 3636T cALM1467 PPS II Failure Alarm PK(0601 TY-421._TRICON II 125 VDC Tricon 3 7 5 3636T cALM1471 PPS II RTD Failure Alarm PK(0603 OOSIITRICON II 125 VDC Tricon 3 7 6 3636T cALM0735 PPS II Channel OOS Alarm PK(0607 120 VAC Tricon 3 7 14 3636T SpareI 120 VAC Tricon 3 7 15 3636T cTC421D OTDT Interlock C3 (RNARA)TC-421H II120 VAC Tricon 3 7 16 3636T cTC421H OPDT Interlock 04 (RNARA)11/12/2013 PPS Interface Requirements Specification, Rev 9 Appendix 4.3_____________Sheet 1 of 8I!I CAL. RANGE J EU PROCESSOR CHASSIS F SLOT CH [CARD TAGNAME (5~TAG {+_I TP TE-430B 200 OHM RTD IA 350-650 Diverse-A A S, 5 3 311 (w)aTE430B A DTTA Lo(op 3 Tcold-1 (for RTD conversion to mA)1 TE40 00OMRD A30 80' ivreA 5 4 31 (waE3Ar TALop3To-1AfrRDcnvrint -A TE'430A 200 OHM RTD IA 350-" 650 'F Diverse-A 
._. A 5 5 311 (w)aTE430A A DTTA Loop 3 Thot-lA (for RTD conversion to mA)TE-431A 200 OHM RTD ___IA 350 -650 &deg;F Diverse-A "A i5 6 311 (w aTE431A A DTTA Loop 3 Thot-3A (for RTD conversion to mA)TE-432A 4200 OMA (3) IA 30 -100 XMRFp Diverse-A 6 1 321 (waFTE432A A ReaTor Coolant3Flow-3 Loop 1T ovrintA FT-416 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A 
! A !6 2 321 (w)aFT416DP A Reactor Coolant Flow Loop 2 FT-426 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-A A 6 3 321 (w)aFT436DP_A Reactor Coolant Flow Loop 32__FT-436 4-20 mA (3) IA ~ 0 -100 XMTR dp% Diverse--A A 6 4 321 (w)aFT436DP A Reactor Coolant Flow Loop 4 PT--457 4-20 mA (3 IA 1250 -2500 psig Diverse-A 
/ A -6 5 321 (w)aPT457 A PZR Pressure__PT-935 20 mA +/-3) IA 55 psig Diverse-A A 6 6 321 (w aPT935 A Containment Pressure TE-431 B 200 OHM RTD ___IA 350 -650 'F Diverse-B B -5 3 311 (w)aTE431 B B DTTA Loop 3Tcold-2 (for RTD COnversion to mA)TE-430C 200 OHM RT=D IA 350 -650 &deg;F Diverse-B i B i5 4 311 (w)aTE430C B DTTA Loop 3 Thot-1 B (for RTD conversion to mA)TE-4310C 200 OHM RTD IA 350- 650 'F Diverse-B , B 5 5 311 (w)aTE431 CB DTTA Loop 3 Thot-2B (for RTD conversion to mA)TE-432C 200 OHM RTD IA 350 -650 &deg;F Diverse-B
_... 5 6 311 (w)aTE432C B DTTA Loop 3 Thot-3B for RTD conversion to mA)FT-41 6 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 6 1 321 (w)aFT41 6DP B Reactor Coolant Flow Loop 1 FT-426 4-20 mA (3) IA 0 -100 XMTR dtp% Diverse-B i B 6 2 321 (w)aFT426DP B Reactor Coolant Flow Loop 2 FT--436 4-20 mA (3) IA ___ 0 -100 t-XMTR dp% Diverse-B B 6 3 321 (w)aFT436DP B Reactor Coolant Flow Loo 3 FT-446 4-20 mA (3) IA 0 -100 XMTR dp% Diverse-B B 4 321 (w)aFT446DP B Reactor Coolant Flow Loop 4 PT-457 4-20 mA (3) IA 1250 -2500 psig Diverse-B B 6 5 321 B PZR Pressure PT-935 4-20 mA (3 IA 55 psij Diverse-B B 6 6 321 (w)aPT935 B Containment Pressure NE-43A 0-10 VOC IA 0 -120 Tricon 1 2 1-3703EN (w)aNE43A DTTA Lop 3 Upper (Neutron)
Flux __NE-43B 0-10 VDC IA 0 -120 _____ Tricon 1 2 23703EN (w)aNE43B DTTA Loop 3 Lower (Neutron)
Flux Tricon 1 3 1 3721N ________________
_____________________
_ Tricon 1 3 2 3721N Spare _TE-430B _ 4-20OmA (3) IA...._IA 510 -630 &deg;F Tricon -1 3 3 3721N (w)aTE4308 DTTA Loop 3Tcold-1 _______TE-430A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 4 3721N (waTE430A DTTA Loop 3 Thot-lA TE-431A 4-20 mA (3) IA 530 -650 'F Tricon 1 3 5 3721 N (w aTE431A DTTA Loop 3 Thot-2A__TE--432A 4-20 mA (3. ____ IA 530 -650 &deg;F Tricon 1 3 6 3721N (w)aTE432A DTTA Loop 3 Tot-3A PT-457 4-20 mA (3) IA 1250 -2500 psi Ticon 1 3 7 3721N (w)aPT457 DTTA Loop 3 PZR Pressure_____ ___________
______Tocon 1 3 8 3721N Spare_____Tricon 1 ..... 3 9 3721 N S are PT-526 4-20 mA (3) IA 0120psij Tricon 1 3 10 3721N (w)aPT526 Loop 2 Steamline Pressure_____ ___ __ Tricon 1 -3 11 3721N __Spare ________-LT-528 4-20 mA (3) IA 0 -100 %Tricon 1 3 12 3721N (w)aLT528 S/G 2 Level LT-548 4-20 mA 3) IA 0 -100 %Tricon 1 3 13 3721N (w aLT548 S/G 4 Level PT-403A 4-20 mA (3). IA 0 -3000 psig Tricon 1 3 14 3721 N (waPT403_A._vvlde Range Pressure Loop 4________ ________ ________Tricon 1 3 15 3721N Spare __________________
___Tricon 1 4 1 3721N Spare_________
__________________________Tricon 1 4 2 3721N Spare __________________
TE-431B 4-20OmA (3) IA 510 -630 'F Tricon 1 4 3 3721N (w)aTE431B DTTA Loop 3Tcold-2 TE-430C 4-20 mA (3) ... IA 530 -650 'F Tricon + 1 4 4 3721 N (w)aTE430C t DTTA Loop 3 Thot-l B TE--431C 4-20 mA (3) IA 530-8650 'F Tricon 1 .4 5 3721N (w aTE431C DTTA Loop 3 Thot-2B TE-432C 4-20 mA (3) IA 530 -650 'j F Tncon 1 4 6 3721 N (w)aTE432C DTTA Loop 3 Thot-3B LT-461 4-20 mA (3) IA 0 -100 i %______ Tricon 1 1 4 7 3721N (w aLT461 PZR Level_________________
________ ________Tricon 1 i4 8 3721N Spare _________________
Tricon i ____T4 9 3721N _Sp~ae PT-536 4-20 mA (3) IA 0 -1200 psig Thcon 1 4 10 3721N (w aPT536 Loop 3 Steamline Pressure____________________
_________
_________Tricon I 1 1 4 11 3721N Spare __________________
LT-518 4-20 mA (3) IA 0- 100 %Tricon '1. 12 3721N (w)aLT518 S/G 1 Level ____________
LT-538 4-20 mA (3) IA 0 -100 %______ Tricon 11 4 13 3721N (w)aLT538 S/G 3 Level PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 2 of 8 PROTECTION SET III ANALOG INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG _______TYPE PT-403 4-20 mA (3) IA 0 -3000 psig Tricon 1 4 14 3721 N (w)aPT403 Wide Range Pressure Loop 4 PM--403A 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Wide Range Pressure Loop 4 LM-461 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Level PM-526 1 4-20 mA -IA NA NA Isolator N/A N/A N/A N/A N/A Loop 2 Steamline Pressure PM-536_1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 3 Steamline Pressure LM-518 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-528 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-528_2 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-538 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 3 Level LM-548 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level PM-457_1 4-20 mA IA NA NA Isolator N/A -N/A N/A N/A N/A PZR Pressure FM-416B 1 4-20 mA IA NA NA Isolator -N/A -N/A N/A N/A N/A Reactor Coolant Flow Loop 1 Normalized FM-426B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 2 Normalized FM-436B 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 3 Normalized FM-446B 1 4-20 mA IA NA NA Isolator -N/A -N/A N/A N/A N/A Reactor Coolant Flow Loop 4 Normalized 11/12/2013
__________________________________________
PPS interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 3 of 8 E INPUTrS__
_ _ _ __ _ 1 11 ___I_ _ _ _ _ _I_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _LTYPE [INST. CLASSI PROCESSOR CHASSISLSLOT~
CH CARD TAGNAME ICHANNEL FUNCTION TAG TYPE FC-416_FRLSMA 48 VDC IA Diverse-A A 7 1 302 dFC416 LSMA Loop 1 Low Flow Rx Trip LSM A Feedback FC-426 FB LSM A 48 VDC IA Diverse-A A -7 2 302 dFC426_LSMA Loop 2 Low Flow Rx Trip LSMA Feedback FC-436_FRLSMA 48 VDC IA Diverse-A A 7 3 302 dFC436 LSMA Loop 3 Low Flow Rx Trip LSM A Feedback FC-446 FR LSM A 48 VDC IA Diverse-A A 7 4 302 dFC446 LSMA Loop 4 Low Flow Rx Trip LSMA Feedback P0-4570_FBLSMA 48 VDC IA Diverse-A A 7 5 302 dPC457C LSMA PZR Press Low Rx Trip LSM A Feedback PC-457B FB LSM A 48 VDC IA 4 Diverse-A A 7 6 302 dPC457B LSMA Unblock SI, P11 LSM A Feedback PC-457AFBLSMA 48 VDC IA Diverse-A A 7 7 302 dPC457A LSMA PZR Press HihR rp LSM A Feedback_________
PC-457D FRLSMA 48 VDC IA Diverse-A A 7 8 302 dPC457D LSMA PZR Press Low-Low SI LSM A Feedback PC-457E FR LSM A 48 VDC IA Diverse-A A -7 9 302 dPC457E LSMA PZR Press High -PORV LSM A Feedback PC-935AFR LSM A 48 VDC IA Diverse-A A 7 10 302 dPC935ALSMA Ctmt Press H hSI, Ph A slan) LSM A Feedback PC-935B FR LSM A 48 VDC IA Diverse-A A 7 11 302 dPC935RLSMA Ctmnt Press High-High (Ctmet Spray, Ph R lIsn) LSM A Feedback FC-416_Byp A 48 VDC IA Diverse-A A 7 12 302 dFC416 BYPA L~oo 1 Low Flow Rx Trip RypA Switch Status FC-426_BypA 48 VDC IA Diverse-A A 7 13 302 dFC426 BYPA Loop 2 Low Flow Rx Trip Ryp A Switch Status FC-436 BypA 48 VDC IA Diverse-A A 7 14 302 dFC436 RYPA Loop 3 Low Flow Rxc Trip RypA Switch Status FC-446 BRByp A -48 VDC IA Diverse-A A 7 15 302 dFC446 RYPA Loop 4 Low Flow Rx Trip BypA Switch Status PC-4570_Byp A 48 VDC IA Diverse-A A 7 18 302 dPC457C RYPA PZR Press Low Rx Tri Ry A Switch Status PC-457R Byp A, 48 VDC IA Diverse-A A -7 17 302 dPC457R RYPA Unblock SI, P11 Byp A Switch Status PC-457ABypA 48 VDC IA Diverse-A A -7 18 302 dPC457A_RYPA PZR Press Hi p ___AwichSttu PC-457DBypA 48 VDC IA Diverse-A A 7 19 302 dPC457D RYPA PZR Press Low-Low SI Byp A Switch Status__PC-457E Ryp A 48 VDC IA Diverse-A A 7 20 302 dPC457E RYPA PZR Press High -PORVB yp A Switch Status PC-935ABypA 48 VDC IA Diverse-A A 7 21 302 dPC935A RYPA Ctmt Press Hi h (SI, Ph A Ilan) RyA Sw Status PC-935RByp A 48 VDC IA Diverse-A A 7 22 302 dPC935R RYPA Ctmt Press Hi h-Hi h (Ctmt Spray Ph 8 lIsn) RyA Sw Status PS3FAIL IlilA 48 VDC IA Diverse-A A -7 24 302 dPS3FAL IliA ALS-A Chassis Power Supply 1 Failure (+48VA)_______
PS6FAIL lIlA 48 VDC IA Diverse-A A 7 25 302 dPS6FAIL lilA ALS-A Chassis Power Supply 2 Failure (+48VB)PSiFAIL lnlA 48 VDC IA Diverse-A A 7 26 302 dPS1FAIL lIlA Analog Input Loop Power Supply 1 Failure PS4FAIL IlilA 48 VDC -IA Diverse-A A -7 27 302 dPS4FAIL IlilA Analo Input Loo Power Supl 2 Failure PS2FAILilA 48 VDC IA Diverse-A A 7 28 302 dPS2FAILIIlA ALS Contact Weh.tting Supply 1 Failure PS5FAIL lIliA 48 VDC IA -Diverse-A A -7 29 302 dPS5FAIL lIlia ALS Contact Wetting Supply 2 Failure PPS Ill Alarm Clear A 48 VDC IA Diverse-A A 10 1 102 dALMCLR lilA PPS Ill A Alann Clear Switch Status PPS Ill TARStatusA 48 VDC IA Diverse-A A 10 2 102 dTABSTAT Ilila PPS IlIiATAR Enable Status FC-416_FRLSMB 48 VDC IA Diverse-B B 7 1 302 dFC416 LSMR Loop 1 Low Flow Rx Trip [SMB Feedback FC-426_FRLSMB 48 VDC IA Diverse-B B 7 2 302 dFC426 LSMR Loop 2 Low Flow Rx Trip LSM B Feedback FC-436_FRLSMB 48 VDC IA __ Diverse-B B 7 3 __302 dFC436_LSMB -Loop 3 Low Flow Rx Trip LSMR Feedback FC-446_FRLSMB 48 VDC IA Diverse-B B -7 4 302 dFC446 LSMB Loop 4 Low Flow Rx Trip LSM B Feedback PC-57C FR=LM 48 VDC IA Dinverse-B 
=B _ 7 5 302 dPC457C LSMB PZR Press Low Rx Trip LSM B Feedback PC-457R FR LSM B 48 VDC IA -Diverse-B B 7 6 302 dPC457BLSMB Unblock SI, P11 LSMB Feedback PC-457A FR LSM B 48 VDC IA -Diverse-B B 7 7 302 dPC457ALSMB PZR Press High Rx Trip LSM B Feedback PC-457D_FRLSM B 48 VDC IA Diverse-B B -7 8 302 dPC457D LSMB PZR Press Low-Low SI LSM B Feedback PC-457E FR LSM B 48 VDC IA -Diverse-B B 7 9 302 dPC457ELSMR PZR Press High -PORV LSMB Feedback PC-935A FB LSM B 48 VDC IA Diverse-B B 7 10 302 dPC935A LSMB Ctmt Press High (SI, Ph A slan) LSM B Feedback PC-935RFR_LSM_8 48 VDC IA ~Diverse-B B 7 11 __302 _ dPC935B LSMB Ctmnt Press Spray, Ph B lIln) LSM B Feedback_FC-416_BypB 48 VDC IA Diverse-B B 7 12 302 dFC416 RBYPB Loop 1 Low Flow Rx Tdp Byp B Switch Status FC-426 Byp B 48 VDC IA Diverse-B B 7 13 302 dFC426 BYPB Loop 2 Low Flow Rx Trip RypBR Switch Status FC-436_BypB 48 VDC IA Diverse-B B -7 14 i302 dFC43R BYPB Loop 3 Low F low Rx Trip BypB Switch Status F0-446_RypR 48 VDC IA Diverse-B B -7 15 302 d FC446..BYPB Loop 4 Low Flow Rx Trip Byp B Switch Status PC-4570_RypB 48 VDC IA Diverse-B B 7 16 = 302 dPC457CBYPB PZR Press Low Rx Trip Byp B Switch Status PC-457BBypB 48 VDC IA Diverse-B B 7 17 302 dPC457B BYPR Unblock SI, P11 BypB Switch Status PC-457ABypB 48 VDC IA Diverse-B B 7 18 302 dPC457A BYPB PZR Press High Rx Trip Ryp B Switch Status PC-457D BypB 48 VDC IA Diverse-B B 7 19 302 dPC457D BYPB PZR Press Low-Low Si Byp B Switch Status PC-457EBypB 48 VDC IA I Diverse-B B 7 2 302 "dPSc45EBYPB=
PZR Press High -PDRV Byp B Switch Status PC-935ABypB 48 VDC IA Diverse-B B 7 21 302 dPC935A BYPB Ctint Press High (SI, Ph A slan) BypB Sw Status PC-935BBypB 48 VDC __IA Diverse-B B ...7 22 302_ dPC935B_BYPB Ctnt~ Hres h-i (Clint Spray, Ph B slin) Sw Status PS3FAIL 111B 48 VDC ~IAj Diverse-BI B 7 24 302 dPS3FAIL 1I1B ALS-A Chassis Power Supply 1 Failure (+48VA)
PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 4 of 8 PROTECTION SET II1 DISCRETE INPUTS ____ ______________l________
INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG TYPE PS6FAIL IIIB 48 VIDC IA Diverse-B 8 7 25 302 dPS6FAIL !lIBt ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAIL 1118 48 VDC IA Diverse-B B 7 26 302 dPS1FAIL 1118 Analog nutLopPwe 1 Failure_PS4FAIL_1II8 48 VDC IA Diverse-B B 7 27 302 dPS4FAIL_1118 Analog Input Loop Power Supply 2 Failure-PS2FAIL 1I18 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL IIIB ALS Contact Wetting Supply I Failure ________PS5FAIL 111B 48 VDC IA Diverse-B B 7 -29 302 dPS5FAIL 1118 ALS Contact Welting Supply 2 Failure PPS Ill Ajarm_Clear_B 48 VDC IA Diverse-B B 10 1 102 dALMCLRII1B PPS IlI B AjarmClear Switch Status PPS Ill TAB Status B 48 VDC IA Diverse-B B 10 2 102 dTABSTAT_1IIB PPS IIl B TAB Enable Status LP3 DTTA 006 24 VDC IA Tricon 2 2 1 3503EN2 dL3 DTTA OOS DTTA Loop 3 Ch. OOS Switch LP3" TTD 24 VDC IA Tricon 2 2 2 3503EN2 dL3_TTD QOS 3 Ch. OOS Switch ___L548 OOS 24 VDG IA I Tricon __2 2 3 3503EN2 dL548 00S 5/G 4 Level OOS Switch L461 OOS 24 VDC __IA Tricon ._2 .....2 7 3503EN2 dL461 OOS PZR Level Ch. OOS Switch P403 OOS 24 VDC IA Tricon 2 2 9 3503EN2 dP403 DOS ltide Range Pressure Loop 4 Ch. OOS Switch P403A OOS 24 VDC IA Tricon 2 2 10 3503EN2 dP4O3A DOS W~de Range Pressure Loop 4 Ch. OOS Switch 24 VDCG 2 2 11 3503EN2 _- Spare_________
24 VDC/2 2 12 3503EN2 Spare P526 00S 24 VDC IA Tricon 2 2 13 3503EN2 dP526 OOS Loop 2 Steamline Pressure Ch. OOS Switch P536 OOS 24 VDC IA Tricon _ 2 2 14 3503EN2 dP536 OOS Loop 3 Steamline Pressure Ch. OOS Switch__________
24 VDC ____________
2 2 1i5- 350)3E N2 Spare ________________________
L518 DOS 24 VDC IA Tricon 2 2 16 3503EN2 dL518 OOS SIG 1 Level OOS Switch L528 OOS 24 VDC IA T Tricon 2 2 17 3503EN2 dL5280ODS SIG 2 Level OOS Switch L538 OOS 24 VDC IA Tricon 2 2 18 3503EN2 dL538_006 S/G 3 Level OOS Switch PS2S FAIL 17 24 VDC __IA Tricon 2 2 19 3503EN2 dPS2S FAIL_17 Analog Loopp(Inpu Pwr upl PS2S Failure Relay PS75 FAIL 17 24 VDC IA Tricon 2 2 20 3503EN2 dPS7S FAIL 17 Analog Loop (Input) Power Supply PS7S Failure Relay PS3S FAIL 17 24 VDC IA i Tricon 2 2 21 3503EN2 dPS3S FAIL 17 Discrete Loop (Input) Power Supply PS3S Failure Relay PS6SFAIL_17
__24 VDC IA Tricon___
2 2 22 3503EN2 dPS6S FAIL 17 Discrete Loop (+Input) Po~werSuppl/
PS6S Failure Relay__________
24 VDC IA Tricon 2 2 23 3503EN2 Sare ___________________________
24 VDC _ IA Tricon 2 2 24 3503EN2 __Spare -___24D1 PVVR 17 24 VDC IA i Tricon 2 2 25 3503EN2 d24DI PWR 17 Loss of Power to Digital Input Card TS/43tC 120 VAC IA Tricon 2 5 1 3501TN2 dTS431CTRIP TC-431CTripStatuslDTTlALoop 3)TS/431G 120 VAC IA Tncon __2 5 2 3501TN2 dTS431CTRIP TC-431G Trip Status (DTTA Loop 3)TS/432D 120 VAC IA Tricon 2 5 3 3501TN2 dTS432D TRIP TC-432D Trip Status (DTTA Loop 3)TS/432G 120 VAC __IA Tricon 2 5 4 3501TN2 dTS432G TRIP TC-432G Trip Status (DTTA Loop 3)PC403A 120 VAC IA Tricon 2 5 5 3501TN2 dPC403ATRIP PC-403A Trip Status (WR Press PT-403A)LS51548A 120 VlAG IA Tricon 2 _ 5 6 3501TN2 dLS548A TRIP LC-548A Trip Status (S/G 4 Level LT-548)PC4038 120 VlAG IA Tricon 2 5 7 3501TN2 dPC403BTRIP P0-4038 Trip Status IWR Press PT-403A)PC4O3D 120 VlAG IA Tricon 2 5 8 3501TN2 dPC403DTRIP PC-403D Trip Status (WR Press PT-403A)PS/526A 120 VlAG IA Tricon _._+2 5 9 3501TN_2 dPS526A TRIP PC-526A Trip Status (S/G 2 Stmline Press PT-526)___
PS/526C 120 VlAG IA Tricon 2 5 10 3501TN2 dPS526CTRIP PC-526C Trip Status (S/G 2 Stmline Press PT-526)PS/535A 120 VlAC IA Tricon 2 5 11 3501TN2 dPS536ATRIP PC-536A Trip Status (SIG 3 Stmline Press PT-536)__ PS/536C 120 VlAG IA Tricon 2 5 12 3501TN2 dPS536GTRIP PC-5360 TripStatus (SIG 3 Stmline Press PT-536)LS/518A 120 VAC IA Tricon 2 5 13 3501TN2 dLS518A TRIP LC-518ATnip Status (S/G 1 Level LT-518)LS/518B 120 VlAG IA Tricon 2 5 14 3501TN2 dLS518B TRIP LC-518B Trip Status (S/G 1 Level LT-518)LS/528A 120 VAC IA Tricon 2 5 15 3501TN2 dLS528A TRIP LC-528A Trip Status (SIG 2 Level LT-528) ___LS/528B 120 VAC IA Tricon 2 5 16 3501TN2 dLS528B_ TRIP LC-528B Trip Status (SIG 2 Level LT-528)LS/536A 120 VlAO IA Tricon 2 5 17 3501 TN2 dLS538A TRIP LC-538A Trip Status (SIG 3 Level LT-538)LS/538B 120 VAC IA Tricon 2 5 18 3501TN2 dLS5388 TRIP LC-538B Trip Status (S/G 3 Level LT-538)LS/548B 120 VAC IA Tricon 2 5 19 3501 TN2 dLS548BTRIP LC-548B Trip Status (SIG 4 Level LT-548)LS/461A 12_0 VlAO IA Tricon 2 5 20 3501TN2 dLS461ATRIP LC-461A Trip Status (PZR Level LT-461) -TS/43t1D 120 VAC II Tricon 3 5 1 3501E dTS431D DTRIP TC-431D Trip Status (DTTA Loop 3)TS/431H 120 VAC II Tricon 3 5... 2 3501E dTS431H TRIP TC-431H ripStatus (DTTA Lo~op.3)PS3NFAIL 17 120 VAC II Tricon 3 5 4 3501E dPS3N FAIL_17 ClasslIlAnalog Loop Power Supply PS3N Failure Relay PPS Interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 5 of 8 PROTECTION SET nlI DISCRETE INPUTS INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG ___ ___________
TYPE _________PS5NFAtL 17 120 VAC II Tricon 3 5 5 3501E dPS5N FAIL 17 !Class II Analog Loop Power Supply PS5N Failure Relay PS2NFAIL 17 120 VAC II _ _ Tricon 3 __5 8_ __3501E dPS2N FAIL 17 Isolator Power Supply PS2N Failure Relay PS6N FAIL 17 120 VAC II ] Tricon 3 5 7 3501E dPS6N FAIL_17 Isolator Power Supply PS6N Failure Relay 120 VAC II Tricon 3 5 8 3501E .dTIM- SvN.i- 7 PPSII ....... * .......11 I12/2013 _____ _____ ___ _______ ______________________
PPS interface Requirements Specification, Rev 9 Appendix 4.3 Sheet 6 of 8__________
__________ -I --CHASSIS SLOTI CH ICARD ITAGNAME (9)NNEL FUNCTION NNEL FUNCTION FM-416B I 4-20 mA 1 1 421 yFI416 A___vFI42B A FM-426B I 4-20 mA Reactor Coolant Flow Loop 1ito FI-416 (VB2) via FM-416B1 (Isolator)
Reactor Coolant Flow Loop 2 to FI-426 (VB2) via FM-426B_1 (Isolator)
......-...TE-430B I 4-20 mA IA Diverse-8 I3 421 vTE&#xa3;4310B TE-430A I 4-20 mA IA Diverse-A 8 4 421 vTE430A A 3 Thot-lA (to PS3 Trcon)3 Thot-2A (to PS3 Tricon)TE-431 A 4-20 mA IA Diverse-A A 8 vTE431A A TE-432A j 4-20 mA IA FM-436B 4-20 mA I IA I-A 8 yTE432AA DTTA Loop 3 Thot-3A (to PS3 Tricon)-I B 1 1 421 yFI436 B Reactor Coolant Flow Loop 3 to FI-436 (VB2) via FM-436B 1 (isolator)
FM-446B 4-20 mA IA Diverse-B B 11121421 yFI446_B Reactor Coolant Flow Loop 4 to FI-446 (VB2) via FM-446B 1 (Isolator)
DTTA Loop 3 Tcold-2 (to PS3 Tricon)TE-431B I 4-20 mA IA Diverse-B I B 8 3 I421 yTE431BB TE-430C 4-20 mA IA Diverse-B B -8 4 421 yTE430C B DTTA Loop 3 Thot-l B (to PS3 Tricon)TE-431C 4-20 mA IA Diverse-8 B B 5 421 yTE431C B DTTA Loop 3 Thot-2B (to PS3 Tricon)TE-432C 4-20 mA IA Diverse-B B B 6 421 yTE432C B DTTA Loop 3 Thot-3B (to PS3 Tricon)TM-431E 4-20OmA II Tricon 3 2 1 3805E yT1431A Delta-T to TI-431A VB2) &aTM431E (RN04A)TM-431F 4-20 mA II Tricon 3 2 2 3805E 1T14316 Overpower Setpoint to T/411A (CC1) & TI-431B (VB2)TM-431G 4-20 mA II Tricon 3 2 3 3805E yTI431C Overtemp Setpoint to T/411A (CC1) & TI-431C (VB2)TM-432F 4-20 mA II Tricon 3 _ 2 4 3805E yTI432 Tav9 to TI-432 (VB2) & aTM432F (RNO4A)..... ............ 
-A _ _1 he3 2 38 8 / ...........
4U 03~BI LM-461 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Level to PZR Level Control (Control Set 1, Control Set 2), ERFDS MUX 03 (VB1)LT-461 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A PZR Level to LI-461 (VB2)PM-457 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A PZR Pressure to PZR Pressure Control (Control Set 1 , P1-457 (VB2)PT-935 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Containment Pressure to PI-935 (VB1) & ERFDS (V/B1)PT-403 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A N/A Loop 4 WR Press to PR--403 (VB2), RVLIS (PAM 4), ERFDS (VB2)________
PM--403A 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 4 WR Press to PI-403A (VB2), ERFDS (VB4)PT-526 Input 4-20 mA IBA,1 (7) N/A N/A N/A N/A N/A Loop 2 Steamline Pressure to PI-526 (VB3)__________________
PM-526 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 2 Steamline Pressure to DFWCS PT-536 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A Loop 3 Steamline Pressure to PI-536 (VB3)PM-536_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 3 Steamline Pressure to DFWCS LT-518 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 1 Level to LI-51B (VB3) & ERFDS (VB1)LM-518_1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 1 Level to DFWCS, AFW LT-52B Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 2 Level to LI-528 (VB63) & ERFDS (VB1)LM-528_1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 2 Level to DFWCS, AFW LM-528 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 2 Level to AMSAC LT-538 Input 4-20 mA IB,A,1 (7) N/A N/A N/A N/A -N/A S/G 3 Level to LI-538 6V3) & ERFDS (VB1)LM-538 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 3 Level to DFWCS, AFW LT-548 Input 4-20 mA IB.A,1 (7) N/A N/A N/A N/A -N/A S/G 4 Level to LI-548 (VB83) & ERFOS (VB1)LM-548 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A S/G 4 Level to DFWCS, AFW FM-41 68_1 4-20 mA I ___I! Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 1 to FI-41 6 (VB2)FM-426B 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 2 to FI-426 (VB2)FM-436B 1 4-20 mA II Isolator Out N/A N/A N/A N/A -N/A Reactor Coolant Flow Loop 3 to FI-436 (VB2)FM-446B_1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Reactor Coolant Flow Loop 4 to FI-446 ('162)11/12/2013
______[ -____ --___________________________________________
PPS Interface Requirements Specification, Rev 9 Appendix 4.3______________________________________Sheet 7 of 8 CHANNEL FUNCTION PPS Ill Chassis A Trouble PPS Ill Chassis A Failure PPS Ill Chassis A Channel in Bypass PPS Ill Chassis A Out of Service Loop 1 Low Flow Rx Trip (SSPS)Loop 2 Low Flow Rx Trip (SSPS)Loop 3 Low Flow Rx Trip (SSPS) _____Loop 4 Low Flow Rx Trip (SSPS)PZR Pressure Low Rx Trip (SSPS)Unblock SI, P1l (SSPS)PZR Pressure High Rx Trip (SSPS)PZRPressure Low-Low SI (SSPS) ___________
PZR Pressure High -PORV (RNASA)Ctmt Press High SI, Ph A lIsn (SSPS)Ctmt Press Hig!h-High Clint Spray,_ph B slin (SSPS)PPS Illia System Timebass Frame Rate Output PPS IlI Chassis B Troubte PPS Ill Chassis B Failure PPS Ill Chassis B Channel in Bypass PPS Ill Chassis B Out of Service Loop 1 Low Flow Rx Trip (SSPS)Loop 2 Low Flow Rx Trip (SSPS) _____Loop 3 Low Flow Rx Trip (SSPS)Loop 4 Low Flow Rx Trip (SSPS)PZR Pressure Low Rx Trip (SSPS)Unblock SI, P11 (SSPS)PZ.R Pressure High Rx Trip (SSPS)_________
PZR Pressure Low-Low SI (SSPS)PZR Pressure High -PORV (RNASA)Ctmt Press Hi.g~h SI, Ph A sIsn Ctmt Press High-High Ctmt Spray, Ph B sIsn (SSPS)PPS IllB System Timebase Frame Rate Output OPDT Rx Trip (SSPS)Low-Low P12 (SSPS)Loop 4 WR Pressure Low to RHR V-8702 Open Ckt (RNSIA)SIG 2 High-HIgh Level Turbine Trip, FW sIsn P14 (SSPS)S/C 3 Low-Low Level Rx Trip & AFW pump Start (SSPS) _.S/G 4 Low-Low Level Rx Trip & AFW Pump Start (SSPS)Loop 4 WNR Pressure High to LTOPS (RNASA)Loop 2 Low Stmeline Press SI & Stmeline sIin (SSPS)Loop 3 Stmeline Press High Negative Rate Stmeline sIsn (SSPS)S/G 1 High-High Level Turbine Trip, FW lIsn P14 (SSPS)OTDT Rx Trip (SSPS)Tavg Low Feedwater Isolation (SSPS) ______S/G 4 High-High Level Turbine Trip, FW slan P14 (SSPS)S/G 2 Low-Low Level Rx Trip & AFW Pump Start (SSPS)S/C 3 High-High Level Turbine Trip, FW/slan P14 (SSPSS ___Loop 4 WR Pressure High to RHR Not Isolated ALM 057 PKO216 Lootp 2 Stmeline Press Hiah Neaative Rate Streline slan (SSPSI L~opp3 Low Stmnline Press SI & Stinline Isjln SSPS)S/G 1 Low-Low Level Rx Trio & AFW Pumpr Start (SSPS'I PPS Interface Requirements Specification.
Rev 9 Appendix 4.3 Sheet 8 of 8 P'ROTECTION SET Iit DISCRETE OUTPUTS INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG VOLTAGE __________TYPE_______
LC-461A IA 120 VAC Tricon 2 7 hio1 3601TN cLC461A PZR Level High Rx Trp (SSPS)LY-518H II 125 VDC Tricon 3 7 i1~ 3636T cALM1475 PPS Ill SIG Low-Low Level TTD Timer Actuated Alarm PK0605 UY-PS3A TRICON II 125 VDC Tricon 3 7 2 3636T cALM1473 PPS Ill Trouble Alarm PK0604 UY-PS3B TRICON II 125 VDC Tricon 3 7 [3 3636T cALM1474 PPS III Channel in Bypass Alarm PK0602 UY-PS3C TRICON II 125 VDC Tricon 3 7 i 4 3636T cALM1472 PPS Ill Failure Alarm PK0601 TY-431 TRICON II 125 VDC Tricon 3 7 i5 3636T cALM1476 PPS III RTD Failure Alarm PK0603 OOSIII TRICON -__II 125 VDC Tricon 3 7 L 6 3636T cALM0738 PPS III Channel 00S Aiarm PK0607 PC-526B ____II 125 VDC Tricon 3 7 7 3636T cPC526B Loop 2 Steamline Pressure Low Alarm 0342 PK0902 PC-536B II 125 VDC Tricon 3 7_ 8 3636T cPC536B Loop 3 Steamline Pressure Low Alarm 0344 PK0903___________
__________ 
~~~3 7 14 3636T ______ ____________________
TC-4-31D II 120 VAC Trdcon 3 7 15 3636T cTC431D OTDT Interlock 03 (RNARA)TC-431H -II 120 VAC Tncon 3 7 -16 3636T cTC431H OPDT Interlock 0-4 (RNARA)11/12/2013
__________
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 1lof 7 P'ROTECTION SET IV ANALOG INPUTS INSTRUMENT fSIGNAL TYPE INST. CLASS CAL. RANGE EU CH CARD TAGNAME (5) JCHANNEL FUNCTION TAG TYPE TE-440B 200 OHM RTD IA 350 -650 0 F Diverse-A A 5 3 311 (w)aTE440B A DTTA Loop 4 Tcold-1 (for RTD conversion to mA)TE-440A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 4 311 (w)aTE440A A DTTA Loop 4 Thot-lA (for RTD conversion to mA)TE-441A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A 5 5 311 (w)aTE441 AA DTTA Loop 4 Thot-2A (for RTD conversion to mA)TE-442A 200 OHM RTD IA 350 -650 &deg;F Diverse-A A -5 6 311 (w)aTE442A A DTTA Loop 4 Thot-3A (for RTD conversion to mA)TE-454 (12) 200 OHM RTD IA 100 -700 &deg;F Diverse-A A -5 7 311 (w)aTE454_A PZR Vapor Temperature (for RTD conversion to mA)PT-474 4-20 mA (3) IA 1250 -2500 ps)g~ Diverse-A A -6 5 321 (w)aPT474_A PZR Pressure PT-934 4-20 mA (3) IA 55 psig Diverse-A A 6 6 321 (w)aPT934 A Containment Pressure TE-441 B 200 OHM RTD IA 350 -650 &deg;F Diverse-B B -5 3 311 (w)aTE441 BB DT TA Loop 4 Tcold-2 (for RTD conversion to mA)TE-440C 200 OHM RTD IA 350 -650 0 F Diverse-B B -5 4 311 (w)aTE440C B DTTA Loop 4 Thot-l B (for RTD conversion to mA)TE-441C 200 OHM RTD IA 350 -650 &deg;F Diverse-B B -5 5 311 (w)aTE441C B DTTA Loop 4 Thot-2B (for RTD conversion to mA)TE--442C 200 OHM RTD IA 350 -650 0 F Diverse-B B 5 6 311 (w)aTE442C B DTTA Loop 4 Thot-3B (for RTD conversion to mA)PT-474 4-20 mA (3 IA 1250 -2500 psig Diverse-B B 6 5 321 (w)aPT474 B PZR Pressure PT-934 4-20 mA (3) IA 55 psig Diverse-B B 6 6 321 (w aPT934_B Containment Pressure NE-44A 0-10 VDC IA 0 -120 %Tricon 1 -2 1 3703EN (w aNE44A DTTA Loop 4 Upper (Neutron)
Flux NE-44B 0-10 VDC IA 0 -120 %Tricon 1 2 2 3703EN (w)aNE44B DTTA Loop 4 Lower (Neutron)
Flux Tricon 1 3 1 3721N Spare Tricon 1 3 2 3721N Spare TE-440B 4-20 mA (3) IA 510 -630 &deg;F Tnicon 1 3 3 3721N (w aTE4-40B DTTA Loop 4 Tcold-1 TE-440A 4-20 mA (3) IA 530 -650 &deg;F Trdcon 1 3 4 3721N (w aTE440A DTTA Loop 4 Thot-lA TE-441A 4-20 mA (3) IA 530 -650 &deg;F Tricon 1 -3 5 3721 N (w)aTE441A DTTA Loop 4 Thot-2A TE-442A 4-20 mA (3) IA 530 -650 &deg;F Tdicon 1 -3 6 3721 N (w)aTE442A DTTA Loop 4 Thot-3A PT-474 4-20 mA (3) IA 1250 -2500 psig Tricon 1 3 7 3721N (w)aPT474 DTTA Loop 4 PZR Pressure STricon 1 3 8 3721N Spare _____________
Tricon 1 3 9 3721N Spare PT-516 4-20 mA (3) IA 0 -1200 psig Tricon 1 3 10 3721N (w)aPT516 Loop 1 Steamline Pressure Tricon 1 3 11 3721N Spare LT-517 4-20 mA (3) IA 0 -100 %Tricon 1 3 12 3721N (w)aLT517 S/G 1 Level LT-537 4-20 mA (3) IA 0 -100 %Tricon 1 -3 13 3721N (w)aLT537 S/G03 Level PT-405A 4-20 mA (3) IA 0 -3000 psig Tricon 1 3 14 3721N (w)aPT405A Wide Range Pressure Loop 4 TE-454 4-20 mA (3) IA 100 -700 0 F Tricon 1 3 -15 3721 N (w)aTE454 PZR Vapor Temperature Tdicon 1 4 1 -3721N Spare______ _______Tdicon 1 4 2 3721N Spare TE--441 B 4-20 mA (3) IA 510 -630 0 F Tdicon 1 4 3 3721 N (w)aTE441 B DTTA Loop 4 Tcold-2 TE-440C 4-20 mA 3) IA 530 -650 0 F Trdcon 1 4 4 3721 N (w aTE440C DTTA Loop 4 Thot-1 B TE-441C 4-20OmA (3) IA 530 -650 &deg;F Tricon __1 4 5 3721N (w)aTE441C DTTA Loop 4Thot-2B TE-442C 4-20 mA (3) IA 530 -650 &deg;F Tdicon 1 4 6 3721 N (w)aTE442C DTTA Loop 4 Thot-3B Trdcon 1 4 7 3721N Spare_______Tricon 1 4 8 3721N Spare________Trcon 1 4 9 3721 N Spare PT-546 4-20 mA (3) IA 0 -1200 psig Trdcon 1 4 10 3721 N (w aPT546 Loop 4 Steamline Pressure_____ _Tricon __1 4 11 3721N Spare ____________________
LT-527 4-20 miA (3) IA 0 -100 %Tdicon 1 4 12 3721 N (w aLT527 S/G 2 Level LT-547 4-20 mA (3) IA 0 -100 %___ Tricon 1 4 -13 3721 N (w aLT547 S/G 4 Level PT-405 4-20 mA (3) IA 0- 3000 ps)j Tricon 1 4 14 3721N (w aPT405 Wide Range Pressure Loop 3 PM-474 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A PZR Pressure PM-405At 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Wide Range Pressure Loop 4 PM-516 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 1 Steamline Pressure PM-546 1 4-20 mA IA NA NA Isolator N/A N/A N/A N/A N/A Loop 4 Steamline Pressure PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 2 of 7 PROTECTION SET IV ANALOG INPUTS INSTRUMENT -SIGNAL TYPE -INST. CLASS -CAL. RANGE EU PROCESSOR CHASSIS SLOT CH CARD TAGNAME (5) CHANNEL FUNCTION TAG ____ ____ ____-__- _ TYPE- _ _ ____________
LM-517_1 20 mA -IA -NA NA Isolator N/A N/A {N/A N/A N/A SIGi1Level LM-517 2 20 mA -IA -NA NA Isolator N/A N/A N/A N/A N/A S/G 1 Level LM-527 1 4-20 mA IA NA NA L Isolator N/A N/A N/A N/A N/A S/G 2 Level LM-537 1 20 mA IA NA NA L Isolator N/A N/A jN/A N/A N/A S/G 3 Level LM-547 1 20 mA IA NA NA Isolator N/A N/A N/A N/A N/A S/G 4 Level 11/12/2013
_______ ______
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 3 of 7 PROTECTtON SET IV DISCRETE INPUTS ______ ____ _______ ______________________________
tNSTRUMENT iSIGNAL TYPE INST. CLASS PROCESSORI CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION S TAG j ___ TYPE ________PC-474A FB [SM A 48 VOC IA Diverse-A A 7 5 302 dPC474A LSMA PZR Press Low Rx Trip LSM A Feedback PC-4740 FB LSM A 48 VDC IA Diverse-A A 7 7 302 dPC474CLSMA PZR PressaHigh Rx" Trip LSM A Feedback PC474D FE LSM A j 48 VDC IA Diverse-A A 7 8 302 !dPC474D LSMA PZR Press Low-Low St LSM A Feedback PC-474BFB LSMA 48 VDC IA Diverse-A A 7 9 302+/- dPC474B LSMA -PZR Press High -PORV LSM A Feedback PC-934A FB [SM A 48 VDC IA Diverse-A A 7 10 302 ldPC934A [SMA Ctmt Press High (SI, Ph A Isin) [SM A Feedback PC-934B FB [SMA 48 VDC IA Diverse-A A 7 11 302! dPC934B [SMA Ctmt Press High-High (Ctmt Spray, Ph B Isin) [SM A Feedback PC-474A BypA 48 VDC IA Diverse-A_-
A 7 16 302 dPC474A BYPA PZR Press Low Rx Trip A Switch Status PC-4740 BypAl 48 VDC IA Diverse-A A 7 i18 302 dPC474C BYPA PZR Press High P-x Tdip Byp A Switch Status PC-474D BypA 48 VDC IA Diverse-A A 7 19 302 dPC474DBYPA PZR Press Low-Low SI BypA Switch Status PC-474B B vp A 48 VDC IA Diverse-A A 7t 20 302 dPC474B BYPA PZR Press Hig 0VBp A S~witch S tatus ..PC-934A Byp-A- 48 VDC IA Diverse-A A 7 21- 302 dPC934A BYPA Ctmt Press High (St, Ph A lIsn) Byp A Sw Status PC-934B 48 VDC IA Diverse-A A 7 i22 302 dPC9348 BYPA CttPesHghHgCmsSry hBlan) Byp A Sw Status PS3FAtL IVA 48 VDC IA Diverse-A A 7 24 302 dPS3FAIL IVA ALS-A Chassis Power Supply 1 Failure (+48VA)PS6FAIL IVA i 48 VOC IA Diverse-A A 7 i25 302 dPS6FAIL IVA ALS-A Chassis Power Supply 2 Failure (+48VB)PS1FAILIVA i 48 VDC IA Diverse-A A 7 J 26 302 dPS1FAIL IVA Anatog InputLoo Power Supl Failure ............
_PS4FAIL IVA 48 VDC IA Diverse-A A 7 f27 302 dPS4FAIL IVA Analog Input Loop Power Supply 2 Failure PS2FAIL IVA 48 VDC IA Diverse-A A 7 28 302 dPS2FAIL IVA ALS Contact Wetting Supply 1 Failure PS5FAIL IVA 48 VDC IA Diverse-A A 7 29 302 dPS5FAIL VMA ALS Contact Wetting SupSly 2 Failure PPS IV Alarm ClearA 1  48 VDC IA Diverse-A A 10 11 102 dALMCLR IVA PPS IV Alarmn Ctear A Switch Actuated pPS IV TAB status A 48 VDC IA Diverse-A A 10 2 102 dTABSTAT-IVA _PPS IV A TAB Enable Status _______PC-474A FB [SMBI: 48 VDC IA Diverse-B B 7] 5 -302 dPC474A LSMB PZR Press Low Rx Trip [SM B Feedback PC-474C FB [SM B 48 VDC IA Diverse-B B 7 7 302 -dPC474C LSMEB PZR Press High RxT L SM B Feedback _____PC474D FE [SM B 48 VDC IA Diverse-B B 7 i8 302 -dPC474D LSME PZR Press Low-Low SI [SM B Feedback PC-474B FE [SMB 48 VDC IA Diverse-B B 7 9 302 dPC474B LSMB PZR Press High -PORV [SM B Feedback PC-934A FE [SM B 48 VDC IA Diverse-B B 7 10 302 dPC934A [SME Ctmat PressHigh (SI, Ph A slan) [SM B Feedback PC-934B FE [SM B 48 VDC IA Diverse-B B 7 11 302 dPC934B [SMB Cltnt Press High-High (Clint Spray, Ph B slan) LSMB Feedback PC-474A B 48 VDC IA Diverse-B B 7 16 302 dPC474A BYPB PZR Press Low Rx Trip BypB Switch Status ___PC-4740 BypB 48 VDC IA Diverse-B B 7 18 302 dPC474C BYPB PZR Press High Rx Tdip BypB Switch Status P0-474D BypB 48 VDC IA Diverse-B B 7 19 302 dPC474D BYPB PZR Press Low-Low SI BypB Switch Status PC-474B B yp B 48 VDC IA Diverse-B B 7 20 302 LdPC474B BYPB PZR Press Hig OR y B Switch Status PC-934ABypB 48 VDC IA Diverse-B B 7 21 302 / dPC934A BYPB Ctmt Press High (SI, Ph A sIsn) BypB Sw Status PC-934B.BypB 48 VDC IA Diverse-B B 7 22 302 dPC934B BYPE Clint Press High-High (Ctmt Spray, Ph B Ilan) Byp B Sw Status PS3FAIL lVB 48 VDC IA Diverse-B B 7 24 302 idPS3FAI lVB ALS-A Chassis Power 1 Failure (+48VA) _____PS8FAIL. lVB 48 VDC IA Diverse-B B 7 j25 302 dPS6FAILIVB ALS-A Chassis Power Supply 2 Failure (+48VB)-PS1 FAIL lyE 48 VDC __IA Diverse-B B 7 26 302 dPS1 FAI.L/V ly nlo nut Loop oerup~piy 1 Failure _____PS4FAIL lyE 48 VDC IA Diverse-B B 7 J27 302 dPS4FAIL IVE Analog Input Loop Power Supply 2 Failure PS2FAlL lyVB 48 VDC IA Diverse-B B 7 28 302 dPS2FAIL IVE ALS Contact Welting Supply 1 Failure PS5FAIL..tVE 
~48 VDC IA Diverse-B B 7 29 _ 302_- dPS5FAIL IVB ALS Contact Wettinsg=
Supp~ly 2 Failure PPS IV Alarm ClearBi 48 VDC IA Diverse-B l 10 1 102 dALMCLR IVE PPS IV Alarm Clear..B Switch Actuated PPS IV TAB Status B 48 VDC IA Diverse-B i B 10 2 102 dTABSTAT IVB PPS IVB TAB Enable Status[P4 DTTA OOS 24 VDC IA Tricon 2 2 1 3503EN2 dL4 DTTA 00S DTTA Loop 4 Oh. OOS Switch[P4 TT1D OOS 24 VDC IA Tdicon i 2 2 2 3503EN2 dL4" TTD "OOS TTD Loop 4 Oh. OOS Switch[.547 24 VOC IA Tricon l 2 2 3 3503EN2 dL547 OOS SIG 4 Level 006 Switch T454 OOS 24 VDC IA Tricon 1 _2 2 5 3503EN2 dT454 OOS PZR Vapor Temperature Oh. OOS Switch__ P405 OOS 24 VDC IA Tricon 2 2 J9 3503EN2 dP4050OOS Wide Ran ge Pressure Loop 3 Oh. 006 Switch P405A OOS 24 VDC IA Tricon __2 --2 J 10 3503EN2- dP405A OOS Wide Range Pressure Loop 4 Oh. OOS Switch P516 O)OS 24 VDC IA Tricon __2 2 12 3503EN2 dP516 -OOS Loop 1 Steamline Pressure Oh. OOS Switch P546 00S 24 VDC IA __ Tricon I 2 i15 3503EN2 dP546 006 Loop 4 Steamline Pressure Oh. 006 Switch[517 006 24 VDC IA Tricon i 2 2 16 3503EN2 d[517 OOS S/G 1 Level OOS Switch[527 006 24 VDC IA Tricon 2 2 17 3503EN2 d[527 006 S/G02 Level 006 Switch[537 006 24 VDC IA Tricon 2 2 ]18 3503EN2 dL537 006 S/G 3 Level 006 Switch ______PS26 FAIL 18 24 VDC IA Tdicon 2 2 -19 3503EN2 dPS2S FAIL,.18 Analog Loop (Input) Power Supply PS25 Failure Relay PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 4 of 7 PROTECTION SET IV DISCRETE INPUTS i INSTRUMENT I SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD I TAGNAME CHANNEL FUNCTION TAG j ____________
TYPE___ ___________________________________
PS7SFAIL 18 / 24 VDJC IA Tdicon 2 2 20 3503EN2 dPS7SFAIL 18 Analog Loop Input) Power SuppI PS7S Failure Relay PS35 FAIL 18 / 24 VDC IA Tdcon 2 2 21 3503EN2 dPS3S FAIL_18 Discrete Loop (Input) Power Supply PS3S Failure Relay PS6S FAIL 18 -24 VDC IA Tdcon ___2 2 22 3503EN2 dPS6S FAIL 18 Discrete Loo (nut)power~pl~yPS6S FailurepRly 24 VDC IA Tricon 2 ......2- '23 3503EN2 Spare.. .........________ 24 VDC IA Tricon_ 2 __ 2 24 3503EN2 Spare__24DIPWVR_18 24 VDC IA Tricon 2 2 25 3503EN2 d24DIPWR 18 Loss of Power t0 Digital input Card TS/441C___
120 VAC IA Trdcon 2 __ 5 1 3501TN2 dTS441C TRIP TC-441C Trip Status DTTA TS/441G 120 VAC IA Tricon 2 -,5 2 3501TN2 dTS441G TRIP TC-441G Trip Status (DTTA Loop 4)TS/442D 120 VAC IA Tricon 2 -2 5 3 3501TN2 dTS442D TRIP TC-442D Trip Status (DTT-IA Loop 4)TS/442G 120 VAC _ IA Tricon___
2 --5 4 3501 TN2 dTS442G TRIP TC-442G Trip Status (DTTA Loop 4).PC405A 120 VAC IA Tricon l 2 -5 5 3501TN2 dPC405ATRIP -PC-405A Trip Status (WR Pressure PT-405A)___LS/547A 120 VAC IA Tdicon__ 2 --5 6 3501TN2 dLS547A TRIP LC-547A TripStatus (S/GLevel LT-547)PC/405B 120 VAC IA -Tricon 2 -5 7 3501TN2 dPC405BTRIP PC-405B Trip Status (WR Pressure PT-405A)PC/405D 120 VAC IA Tricon ! 2 5 8 3501TN2 IdPC405D TRIP PC-405D Trip Status (WNR Pressure PT-405A)PS/516A 120 VAC IA Tricon 2 5 9 3501TN2T dPS516A TRIP PC-516A Tri S tatus.(Stmline Pressure PT-516)PS/516C 120 VAC IA Tricon I 2 5 10 3501TN2 dPS516C TRIP PC-516C Trip Status (Stmline Pressure PT-516)PS/546A 120 VAC IA Tricon 2 5 11 3501TN2 dPS546A TRIP PC-546A Trip Status (Stmline Pressure PT-546)PS/546C 120 VAC IA_ Tricon 2 5 12 3501TN2 dPS546C TRIP PC-546C TripSatsStmline Pressure PT-546)______
LS/517A 120 VAC -~IA Tricon 2_____ 5_____LS/517B 120 VAC _ _ IA Tricon 2 5 14 3501TN2 dLS517B TRIP LC-517B Trip Status SIG Level LT-517) ____LS/527A 120 VAC --IA -- Tricon __2 5 15 3501TN2 dLS527A TRIP LC-527A Trip Status (SIC Level LT-527)LS/527B 120 VAC IA Tricon __2 5 16 3501TN2 dLS527B TRIP LC-527B Tri Status (SIC Level LT-527)___LS/537A___
120 VAC _ IA Tricon __2 _ 5 3501TN2 dLS537A TRIP _LC-537A Trip Status (S/C Level LT-537)___
LS/5378 120 VAC IA Tricon __2 5 18 3501TN2 dLS537BTRIP LC-537B Trip Statush (S/C Level LT-537)LS/547B 120 VAC IA Tricon 2 5 sF 19 3501TN2 dLS547B TRIP LC-547B Trip Status (SIC Level LT-547)______________
120 VC II Trico 3 51 T44DTI C41 rpSau OT op4 TS/441D 120 VAC II Tricon __3 5 2 3501E dTS441H TRIP TC-441DHTrip Status (DTTA Loop 4) __PS3N4AIL18 120 VAC II Tricon 3 5 4 3501E dPS441 FAI 18 Class1HI nalg op Powersupl SNFilrea -PS3N FAIL 18 120 VAC 11 Tricon 3 5 5 3501E dPS3N FAIL 18 Class II Analog Loop Power Supply PS3N Failure Relay PS2N FAIL 18 120 VAC __II __ Tricon 3 5 6 3501E dPS5N FAIL 18 IslassItAaor oo Power Supply PS5N Failure Relay __PS2N FAIL 18 120 VAC II __ Tricon 3 5 16 3501E dPS2N FAIL 18 Isolator Power Supply PS2N Failure Relay T~=ot,.4 120 VAC II _ Tricon 3 5 ]8 3501E ,d'rM- YvC-,4, o 1,1122013
______ _______
PPS Interface Requirements Specification, Rev 9 Appendix 4.4 PROTCTIO SETIV NALO OUTUTSSheet 5 of 7 INSTRUMENT SIGNAL TYPE INST. CLASS PROCESSOR CHASSIS SLOT CH CARD TAGNAME (9) CHANNEL FUNCTION__ TAG __ _ _-TYPE TE-440B 4-20 mA IA Diverse-A A 8 3 421 yTE440B A DTTA L oop 4 Tcold-1 (PS4 Tricon)TE-440A 4-20 mA IA Diverse-A A 8 4 421 yTE44OA A DTTA Loop4 Thot-lA (PS4 Tdcon)TE-441A 4-20 mA IA Diverse-A A 8 5 421 yTE441A A DTTA Loop 4 Thot-2A (PS4 Tricon)TE-442A 4-20 mA IA Diverse-A A 8 6 421 yTE442A A DTTA Looo 4 Thot-3A (PS4 Tilcon)TE-454 4-20 mA IA Diverse-A A 8 7 421 yTE454 A PZR Vapor Temperature (PS4 Tricon)TE-441 B 4-20 mA IA Diverse-B B 8 3 421 yTE441 B B DTTA Loop 4 Tcold-2 PS4 Tricon)TE--440C 4-20 mA IA Diverse-B B 8 4 421 yTE440C B DTTA Loop 4 Thot-l B (PS4 Tricon)TE-441C 4-20 mA IA Diverse-B B 8 5 421 yTE441C B DTTA Loop 4 Thot-2B (PS4 Trdcon)TE--442C ___ 4-20 mA_ ___IA Diverse-_B
_B __8 __6 _421 ....... T442C B DTTA Loop 4 Thot-3B (PS4 Trdcon)TM-441E ___ 4-20 mA II__ Tricon 3 2 __1 3805E yTI441A Delta-T to TI-441A (VB2) & aTM4.41E (RN04A)TM-441F 4-20OmA II Tricon 3 2 2 3805E yTI441B Ove oer Setpointto T/411A (CC1 & TI-441B VB2)TM-441G 4-20OmA II Tricon 3 2 3 3805E yT1441C JOvertemp Setpoint to T/411A (CCl) &TI-441C (B2)TM-442F 4-20 mA II Tricon 3 2 _ 4 3805E jTavg to Tl-442 (VB2) & aTM442F (RN04A)TM-454A 4-20 mA lI,D,3 Tricon 3 2 5 3805E T'1/454 vs-por Tamp to TI-454 (VB2--PM-474 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A .PZR Pressure to PZR Pressure Control (Control Set 1_PT-516 Input 4-20 mA IBA,1 7 N/A -N/'A-N/A -N/A- N/A- Loo.....t.amine Pressure to P1-516 (VB-___ PM-5i6 1 4-20 mA _ II Isolator Out N/A N/A N/A N/A N/A Lo 1 Steamline Pressure to DFWCS PT-546 Input 4-20 mA IBA,1 7 N/A N/A N/A N/A N/A Loop 4 Steamline Pressure to P1-546 VB3)PM-546 1 4-20 mA II Isotator Out N/A N/A N/A N/A N/A Loop 4 Steamline Pressure to DFWCS___LT-517 Input __4-20 mA IB,A,1 ....... (7) N/A N/A N/A N/A N/A S/G 1 Level to LI-517 VB3), ERFDS (VB4)LM-517 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to DFWCS, AFW LM-517 2 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 1 Level to AMSAC LT-527 Input ___ 4-20 mA IB,A,1 (7Z) N/A N/A N/A __N/A N/A S/G 2 Level to LI-527 (VB3), ERFDS (VB4)LM-527 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 2 Level to DFWCS, AFW___ LT-537 Input 4-20 mA IBA,1 _ (7) N/A _ N/A N/A N/A ___N/A S/G 3 evl to LI537 yB3),_ERFDS (VB4) __LM-537 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 3 Level to DFWCS, AFW LT-547 Input 4-20 mA IBAA1 7 N/A N/A N/A N/A N/A S/G 4 Level to LI-547 (VB3), ERFDS (VB4)___ LM-547 1 I 4-20 mA II Isolator Out N/A N/A N/A N/A N/A S/G 4 Level to DFWCS, AFW___________
PT-934 Input 4-20 mA -IBA,1 j7) ~ N/A N/A N/A N/A N/A Containment Pressure to P1-934 (VB1)PT-405 Input 4-20 mA IBA,1 (7) N/A N/A N/A N/A N/A Loop 3 WR Press to PI-405 (VB2), ERFDS (VB4), RVLIS (PAM 3)PM-405A 1 4-20 mA II Isolator Out N/A N/A N/A N/A N/A Loop 4 WR Press to PI-405A (VB2), ERFOS __11/11/2013 PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 6 of 7 PROTECTION SET INSTRUMENTI IU PI A~r~flIYII 4 ~nn,.iNcL.
rUIN~,. I TAG VOLTAGE}TYPE UY-PS4A_DIV-A II 125 VDC Diverse-A A 2 1/2 402 cPS4A DIV A PPSIV Chassis ATrouble UY-PS4CDIV-A II 125 VDC Diverse-A A 2 3/4 402 cPS4C DIV A PPS IV Chassis A Failure__UY-PS4BDIV-A II 125 VDC Diverse-A A 2 5/6 4D2 cPS4B DIV A PPS IV Chassis A Channel in Bypass UY-PS4D DIV-A II __ 125 VDC Diverse-A A 2 7/8 402 cPS4D DIV A PPS IV Chassis A Out of Service PC-474A A IA 120 VAC Diverse-A A 9 5 402 cPC474A A PZR Pressure Low Rx Tnip (SSPS)PC-474C A IA 120 VAC Diverse-A A 9 7 402 cPC474C A PZR Pressure High R-x Tdip (SSPS)PC-474D A -__IA 120 VAC Diverse-A A 9 _8 40.2 .cPC474D_A PZR Pressure Low-Low SI (SSPS)PC.-474B A IA 120 VAC (11) Diverse-A A 9 9 402 cPC474B A PZR Pressure High -PORV (RNASA)PC-934A A IA 120 VAC Diverse-A A 9 10 402 cPC934A A Clint Press High SI, Ph A Isin (SSPS)PC-934BA ___IA ___ 48 VDC Diverse-A
__A __ 9 11 402 cPC934B A Clint Press H~igh-High Clint Spray, Ph B Ilan (SSPS)___LOOPPULSEA II 48 VDC Diverse-A A 10 1 102 cPULSE A PPS IV A System Timebase Frame Rate Output UY-PS4A DIV-B II 125 VDC Diverse-B B 2 1/2 402 cPS4A DIV B PPS IV Chassis B Trouble UY-PS4CDIV-B II 125 VDC Diverse-B B 2 3/4 402 cPS4C DIV B PPS IV Chassis B Failure UY-PS4BDIV-B j___II _ 125 VDC Diverse-B
_ B 2 5/6 402 cPS4B DIV B PPS IV Chassis B Channel in Byass __UY-PS4DDIV-B
___II 125 VDC Diverse-A A 2 7/8 402 cPS4D DIV B PPS IV Chassis B Out of Service PC-474A B IA 120 VAC Diverse-B B 9 5 402 cPC474A B PZR Pressure Low Rx Tdip (SSPS)PC-474CB IA 120 VAC Diverse-B
__B __ 9 7 402 cPC474C B PZR Pressure Hig~h Rx Trip (s~sps)PC-474D B 4 IA -120 VAC Diverse-B B 9 8 402 cPC474D B PZR Pressure Low-Low SI (SSPS)PC-474B B IA 120 VPC (11) Diverse-B B _ 9 9 402 cPC474BB _PZR Pressure High -PORV (RNASA) ___ _______PC-934A B IA 120 VAC Diverse-B B 9 10 402 cPC934A B Cltmt Press High SI, Ph A lain (SSPS)PC-934B B IA 48 VDC Diverse-B B 9 11 402 cPC934B B Clint Press High-High Clint Spray, Ph B slan (SSPS)LOOPPULSEB II __ 48 VDC Diverse-B B 10 1 102 cPULSEB PPS IV B System Timebase Frame Rate Out~put________________
_______ Tricon ___TC-454A deleted (internal point only)TC-441G IA 120 VAC Tricon____2 6 1 3601TN cTC441G OPDT Rx Tdp (SSPS) __TC-442D IA 120 VAC Tricon 2 6 2 3601TN cTC442D Tavg Low-Low P12 (SSPS)PC--405A IA___ 120 VAC Trdcon 2 6 3 3601TN _ cPC405A _Loop 4 WR Pressure Low to RHR V-8701 Open Ckt (RNSIB)LC-527A IA 120 VAC Tricon 2 6 4 3601TN cLC527A S/G 2 High-High Level Turbine Trip, FW sIsn P14 (SSPS)LC-537B IA 120 VAC Tdicon 2 6 5 3601TN cLC537B S/G 3 Low-Low Level Rx Trip & AFW Pump Start (SSPS)LC-547B IA 120 VAC Tricon __2 6 6 3601TN cLC547B S/G 4_Low-Low Level Rx Trip & AFW Pump Start (SSPS)PC-405D IA 120 VAC Tricon __2 6 7 3601TN cPC4O5D Loop 4 WR Pressure High to LTOPS (RNASA)PC-516A____
IA_____ 120 VAC Tdicon __2 6 8 3601TN cPC516A Loop 1 Low Stmline Press SI & Stmline lain (SSPS)PC-546C IA_ 120 VAC Tricon __2 6 9 3601TN cPC546C Loop 4 Stmline PressHigh Negtie Rate Stmline Ilan (SSPS)LC-517A____
____A__ 120 VAC Tdicon __2 8 10 3601TN cLC517A S/G 1 High-High Level Turbine Trip, FW lIsn P14 (SSPS)TC-441C___
IA___ _ 120 VAC Tdicon 2 7 1 3601TN cTC441C OTDT Rx Trip (SSPS)TC-442G____
IA_____ 120 VAC Tricon 2 7 2 3601TN cTC442G Tavg Low Feedwater Isolation (SSPS)LC-547A IA 120 VAC L Tricon 2 7 3 3601TN cLC547A S/G 41-igh-High Level Turbine Trip, FW lIsn P14 (SSPS)LC-527B___
IA120 VAC Tricon 2 __ 7 4 3601TN cLC527B S/G 2 Low-Low Level Rx Trip & AFW Pump Start (SSPS)LC-37AIA120 VAC Tricon 2 __ 7 5 3601TN cLC537A S/G 3 High-High Level Turbine Trip, FW lIsn P14 (SSPS)___IA 120 VAC Tricon_ 2 7 6 3601TN cPC405B Looo 4 WR Pressure Hligh to RHR Nol Isolated Alarm CktI (RNSIB)PC-516C IA 120 VAC / Tricon 2 7 7 3601TN cPC516C Loop 1 Stmnline Press High Negalive Rate Stmline Ilan (SSPS)PC-546A IA 120 VAC Tricon 2 7 8 3601TN cPC546A Loop 4 Low Stmline Press SI & Stmline lIin (SSPS)LC-517B IA __ 120 VAC Tricon 2 7 9 3601TN cLC517B S/Cl1 Low-Low Level Rx Trip& AFW Pump Start (SSPS) __Spare IA 120 VAC Tdicon 2 7 10 3601TN Spare LY-517H II __ 125 VDC Tricon 3 7 1 3636T cALM1480 PPS IV S/C Low-Low Level TTD Timer Actuated Alarm (MAS) PK0605 UY-PS4ATRICON II 125 VDC Tricon __3 7 2 3636T cALM1478 PPS IV Trouble Alarm (MAS) PK0604 UY-PS4B TRICON II 125 VDC I Tdicon 3 7 3 3636T cALM1479 PPS IV Channel in Bypass Alarm (MAS PK0602_________
UY-PS4CTRICON II 125 VDC Tricon 3 7 4 3636T cALM1477 PPS IV Failure Alarm (MAS) PK0601 TY-441 TRICON II __ 125 VDC Tricon 3 7 5 3636T cALM1481 PPS IV RTD Failure Alarm (MAS) PK0603 00S IV TRICON ___II __ 125 VDC Tricon 3_ 7[ 6 3636T cALM0739 PPS IV Channel OOS Alarm (MAS) PK0607 PC'516B II __ 125 VDC iTricon 3j7 7 3636T cPC516B Loop 1 Steamline Pressure Low Alarm (MAS) 0245 PK0901 PPS Interface Requirements Specification, Rev 9 Appendix 4.4 Sheet 7 of 7 PROTECTION SET tV DISCRETE OUTPUTS INSTRUMENT INST. CLASS INTERROGATION PROCESSOR CHASSIS SLOT CH CARD TAGNAME CHANNEL FUNCTION TAG _______ VOLTAGE ________ __ TYPE ______ ________________
PC-5468 II 125 VDC Tricon 3 7 8 3636T cPC546B Loop 4 Steamline Pressure Low Alarm (MAS) 0325 PK0904-TC-441D II 120 VAC Tricon 3 7 15 3636T cTC441D OTDT Interlock C3 (RNARA)TC-441H II 120 VAC Tricon 3 7 16 3636T cTC441H OPDT Intertock C4 (RNARA)11/1212013
________ _______________________
_________________________________}}