This violation of very low safety significance was identified by the licensee and has been entered into the licensee corrective action program and is being treated as a non-cited violation, consistent with Section 2.3.2 of the
Enforcement Policy. Title
10 CFR 20.1902(a) requires the licensee to post each radiation area with a conspicuous sign bearing the radiation symbol and the words "CAUTION, RADIATION AREA."Contrary to the above, from November 9, 2017 to November 13, 2017, the licensee failed to post a radiation area with a conspicuous sign bearing the radiation symbol and the words "CAUTION, RADIATION AREA."The licensee moved two resin liners with high dose rates into the turbine building truck bay. Once the resin liners were in the turbine building truck bay, a
high radiation area boundary was posted around them. However, the dose rates outside the truck bay doors were not verified. On November 13, 2017, the licensee, while conducting routine area surveys, identified an unposted radiation area outside the turbine building truck bay doors, which resulted from the resin liners inside of the truck bay area. The licensee secured the radiation area and adequately posted it, as required.
