LR-N10-0015, Application for Technical Specification Change Regarding Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program
LR-N09-0193, License Amendment Request to Adopt TSFT-475, Revision 1, Control Rod Notch Testing Frequency and SRM Insert Control Rod Action
LR-N09-0002, Request for Change to Technical Specifications Regarding Mode Change Limitations Using the Consolidated Line Item Improvement Process (Cliip), TSTF-359
SBK-L-18094, License Amendment Request 18-02, Application to Revise the Technical Specifications Associated with Movable Control Rods
NOC-AE-05001921, License Amendment Request - Proposed Amendment to Technical Specifications to Incorporate Best Estimate Analyzer for Core Operations - Nuclear
LR-N04-0510, Change to Commitment Inservice Leak and Hydrostatic Testing
SBK-L-20154, Submittal of Changes to the Seabrook Station Technical Specification Bases
U-600424, Submits Detailed Justifications Re Power Ascension Program Acceleration Test Mods.Expedited Review of Test Mods Requested Since Mods Impact Finalization of Detailed Procedures
B11608, Forwards Draft STS for three-loop Operation of Facility, Reflecting ANSI N510-1980 & Providing Addl Info Not Included in Original Submittal
AECM-84-0318, Application for Amend to License NPF-13,revising Tech Specs to Correct Typographical Errors,To Implement Editorial Changes & to Provide Clarification of Basic Meaning & Intent of Tech Spec changes.Marked-up Tech Specs Encl
U-600680, Forwards Addl Info for NRC to Complete Review of Tech Specs, Per 860721-25 Meetings.Table 1 Summarizes Changes to Tech Specs & Provides Technical Discussion for Each Change
05000370/LER-1985-021-02, :on 850729,control Board Position Indication Lost for Shutdown Bank E,Rod D-8 & Reactor Manually Tripped as Specified by Tech Specs.Caused by Data a Encoder Card Failure.Card Replaced
05000369/LER-1991-010-01, :on 910719,discovered That Control Rod Deviation Monitor Inoperable Since 831207.On 910713,control Rod Groups 1 & 2 Misaligned by Greater than 12 Steps.Caused by Defective Procedure & Mgt Deficiency
05000328/LER-1991-004, :on 910329,plant Process Computer P-250, Computer Point C0019A Discovered Out of Scan.Caused by Not Maintaining Configuration Control During Troubleshooting on 910321.Configuration Control Implemented
05000328/LER-1991-004-02, :on 910329,computer Point Out of Scan on P-250 Computer as Result of Not Maintaining Configuration Control. Caused by Failure to Return Point to Scan.Computer Point Placed Back to Scan
JSP-156-93, Application for Amend to License NPF-62,revising TS 3/4.1.3.2,3/4.4.2.1 & 3/4.5.1 Re Control Rod Max Scram Insertion Times,Safety/Relief Valves & Eccs,Respectively,To Reduce Time Restrictions on Surveillance Testing
LR-N20-0033, Submittal of Hope Creek Generating Station Technical Specification Bases Changes
PY-CEI-NRR-1956, Application for Amend to License NPF-58,proposing Early Implementation of Control Rod Drive Scram Time Testing Consistent W/Requirements in PNPP Improved TS LAR
LR-N23-0024, Submittal of Hope Creek Generating Station Technical Specification Bases Changes
LR-N21-0079, Submittal of Hope Creek Generating Station Technical Specification Bases Changes
PY-CEI-NRR-1379, Proposed Tech Specs 3.1.3.2, Control Rod Max Scram Insertion Times, Clarifying Under What Conditions Shutdown of Plant to Hot Shutdown Is Required
RA-23-0028, Application to Revise Technical Specifications to Adopt TSTF-234-A, Revision 1, Add Action for More than One (D)Rpi Inoperable