JAFP-17-0010, Proposed Alternative to ASME Code Requirements for Weld Overlay Repair, RR-21
RS-17-014, Reactor Pressure Vessel Penetration N-11B Repair Relief Request I5R-11
BSEP 17-0033, Proposed In-service Inspection Alternative for Application of Dissimilar Metal Weld Full Structural Overlay
RS-16-224, Relief Request for Alternative Requirements for the Repair and Examination of Reactor Vessel Head Penetrations for the Fourth Inservice Inspection Interval
RS-16-057, Supplement to Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds
RS-16-045, Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds
RS-18-004, Additional Information Supporting Reactor Pressure Vessel Penetration N-11B Repair Relief Request I5R-11
NLS2015112, Response to NRC Requests for Additional Information for Relief Request No. RR5-01, Alternate Weld Overlay Repair for a Dissimilar Metal Weld Joining Nozzle to Control Rod Drive End Cap
NLS2105025, 10 CFR 50.55a Requests for Fifth Ten-Year Inservice Inspection Interval
PNP 2015-022, Relief Request Number RR 5-1, Proposed Alternative, Extend the Current ASME Code of Record Into the Fifth 10-year ISI Interval for ISI Related Activities
PNP 2014-024, Response to Request for Additional Information Dated February 28, 2014 for Relief Request Number RR 4-19, Proposed Alternative to Requirements of ASME Code Case N-638-4
PNP 2014-019, Relief Request Number RR 4-19 Proposed Alternative to the Requirements of ASME Code Case N-638-4
RS-13-289, Additional Information Supporting Relief Request I5R-11 Associated with Reactor Pressure Vessel Penetration N-11B Repair
RS-12-150, Fifth Interval Inservice Inspection Program Plan and Relief Requests
GNRO-2012/00109, Stress Analysis Summary Demonstrating That the Nozzle to Safe-End DMW, N06B-KB, Will Perform Its Intended Design Function After Weld Overlay Installation
HNP-12-060, Relief Request I3R-09 Reactor Vessel Closure Head Nozzle Repairs Inservice Inspection Program - Third Interval, Request for Additional Information Response
GNRO-2012/00040, Relief Request ISI-17 Repair Plan for Lsi Weld N06B-KB
RS-12-068, Response to Request for Additional Information Regarding Relief Request 14R-19 Associated with the Reactor Pressure Vessel Nozzle Repairs
RS-12-064, Relief Request 14R-19 Associated with the Reactor Pressure Vessel Nozzle Repairs
NL-11-0692, Discrepancies Identified Between Alternative ISI-ALT-08-02 and the NRC Safety Evaluation
TMI-11-061, ISI Program Plan, Fourth Ten-Year Inspection Interval
RS-15-236, Braidwood Station, Units 1 and 2 & Byron Station, Units 1 and 2 - Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds
TMI-10-100, Submittal of Relief Request RR-10-02 Re Weld Overlay of the Pressurizer Spray Nozzle to Safe-End & Safe-End to Elbow Dissimilar Metal Welds
1CAN041002, Fourth 10-Year Inservice Inspection Interval, Request for Alternative ANO1-R&R-013, Repairs to the Pressurizer Instrumentation Penetrations
NL-09-1510, Vogtle Electric Generating Plant, Units 1 and 2 - Inservice Inspection Plan Third Inspection Interval Volume 1, Version 3.0
PLA-6550, Comment (19) of T. S. Rausch on Behalf of PPL Susquehanna, LLC Re Draft Regulatory Guides; DG-1191, DG-1192 and DG-1193
L-09-179, Response to Requests for Additional Information Related to Alternative Dissimilar Metal Weld Repair Methods
AEP-NRC-2009-42, Response to Request for Additional Information Regarding Relief Request (ISIR-28) for Use of Weld Inlays as an Alternate Repair Technique for Alloy 82/182 Dissimilar Metal Welds in Reactor Vessel Safe End-to-Primary Nozzles
L-09-020, 10 CFR 50.55a Requests for Alternative Dissimilar Metal Weld Repair Methods for Reactor Vessel Nozzles, Reactor Coolant Pump Nozzles, and Reactor Coolant Piping
NL-08-0877, Proposed Alternative in Accordance with 10 CFR 50.55a(a)(3)(i) Application of Dissimilar Weld Full-Structural Weld Overlays Alternative Lsi ALT-08-02 Version 1
AEP-NRC-2008-25, Use of Weld Inlays as an Alternative Repair Technique for Reactor Vessel Safe End-to-Primary Nozzle Alloy 82/182 Welds
JAFP-08-0102, Request for Relief (RR-7 Revision 1) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
JAFP-08-0099, Request for Relief (RR-7) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
L-2008-210, In-Service Inspection Plans, RAI Reply for Fourth Ten-Year Interval Unit 1 Relief Request 2
L-2008-098, In-Service Inspection Plans, Submittal for the Use of Structural Weld Overlays as an Alternative Repair Technique, Fourth Ten-Year Interval Unit 1 Relief Request 2
NLS2008031, Response to Request for Additional Information Regarding 10 CFR 50.55a Request RI-35, Revision 0, and Submittal of RI-35, Revision 1
1CAN020803, Request for Alternative ANO1-R&R-011 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
NL-08-0280, Application of a Dissimilar Metal Weld Full-Structural Weld Overlay
W3F1-2008-0010, Revised Request for Alternative W3-R&R-006 - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
2CAN020801, Supplemental to Request for Alternative ANO2-R&R-005, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
SBK-L-08022, Supplement to Request for Use of Structural Weld Overlays as an Alternative Repair Technique
NLS2008012, 10 CFR 50.55a Request Number RI-35, Revision 0
RC-08-0009, Supplemental Information Relative to Request to Use Alternatives to ASME Code Section Xl Requirements for Application of Weld Overlay Repairs (RR-III-05)
DCL-07-099, ASME Section XI Inservice Inspection Program Relief Request REP-1 U2, Revision 1, and Response to Request for Additional Information
1CAN100702, Request for Alternative ANO1-R&R-011, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
L-2007-148, In-Service Inspection Plans, Resubmittal for the Use of Structural Weld Overlays as an Alternative Repair Technique Third Ten-Year Interval Unit 2 Relief Request 10
NL-07-1320, Proposed Alternative or Application of Pressurizer Nozzle Full-Structural Weld Overlays
SBK-L-07120, Request for Use of Structural Weld Overlays as an Alternative Repair Technique
NL-07-1179, Additional Request Regarding the NRC Approval Alternative for Application of Pressurizer Nozzle Full-Structural Weld Overlays
RC-07-0085, Virgil Summer - Request to Use Alternatives to ASME Code Section XI Requirements for Application of Weld Overlay Repairs (RR-III-05)
HNP-07-041, Inservice Inspection Relief Request 1, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00021, Request for Alternative W3-R&R-006 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00014, Request for Alternative ANO1-R&R-010 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00012, Request for Alternative ANO2-R&R-005, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00010, Request for Alternative ANO1-R&R-010 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
2CAN112103, Relief Request ANO2-RR-21-002, Half-Nozzle Repair of Reactor Vessel Closure Head Penetration 46
RS-22-127, Submittal of Sixth Inservice Inspection Interval Relief Request I6R-10 Reactor Pressure Vessel Penetration N-11B Repair
3F0907-05, Relief Request 07-003-RR, Revision 1, and Response to Request for Additional Information
3F1008-03, Relief Request 08-002-RR, Revision 0
W3F1-2019-0009, Proposed Inservice Inspection Program Alternative WF3-RR-19-1 for Application of Dissimilar Metal Weld Full Structural Weld Overlay - Reactor Coolant System Cold Leg Drain Nozzles
W3F1-2019-0011, Response to U.S. Nuclear Regulatory Commission Request for Additional Information Regarding Relief Request WF3-RR-19-1 for Application of Dissimilar Metal Weld Full Structural Weld Overlay
RS-12-070, Response to Follow-up RAI Questions Related to Exelon Response to RAI Question 7
JAFP-17-0054, Submittal of Stress Analysis Summary for the 24-10-130 Weld Overlay
LG-17-080, Proposed Relief Request Associated with Reactor Pressure Vessel Nozzle Repairs
LG-17-077, Proposed Relief Request Associated with Reactor Pressure Vessel Nozzle Repairs
RA-14-105, Submittal of Fifth Ten-Year Interval Inservice Inspection Program Plan
05000530/LER-2013-001, Regarding Leakage on Reactor Vessel Bottom-Mounted Instrumentation Nozzle 3
05000255/LER-2014-003, Regarding Weld Defect in Pressurizer Nozzle to Nozzle Safe End Flange
BW070013, Second 10-Year Inservice Inspection Interval, Relief Request I2R-48, Structural Weld Overlays on Pressurizer Spray, Relief, Safety and Surge Nozzle Safe-Ends and Associated Alternative Repair Techniques
RS-12-151, Fifth Interval Inservice Inspection Program Plan and Relief Requests
PNP 2025-059, Relief Request Number RR 5-12, Proposed Alternative to ASME Section XI Code for Full Structural Weld Overlays of Primary Coolant System Hot Leg, Cold Leg, and Pressurizer Nozzle Dissimilar Metal Welds
PNP 2025-067, Additional Information in Support of Relief Request RR 5-12, Proposed Alternative to ASME Section XI Code for Full Structural Weld Overlays of Primary Coolant System Hot Leg, Cold Leg, and Pressurizer Nozzle Dissimilar Metal Weld