NL-17-057, Request IP2-ISI-RR-20 for Relief from Examinations of Code Class 1 Component Welds with Less than Essentially 100% Examination Coverage for Fourth Ten-Year Inservice Inspection Interval Closeout
Information Notice 1998-44, Ten-Year Inservice Inspection (ISI) Program Update for Licensees That Intend to Implement Risk-Informed ISI of Piping
NG-17-0221, Fifth Inservice Inspection Interval Program Plan Relief Request No. RR-05
2CAN021302, Response to Request for Additional Information on Relief ANO2-ISI-010
2CAN021301, Response to Request for Additional Information, Request for Relief ANO2-ISI-014
RC-12-0097, (VCSNS) Unit 1, Request for Weld Recategorization for VCSNS Steam Generator Nozzle to Safe End Welds (Preliminary Submittal - RR-III-08)
NOC-AE-12002837, Response to Request for Additional Information: Application of an Alternative to Requirements for Examination of Class 1 and Class 2 Piping Welds (Relief Request RR-ENG-3-04)
SBK-L-12063, Response to Request for Additional Information Second 10-Year Interval Inservice Inspection Program Plan Requests for Relief
DCL-12-007, Request for Approval of an Alternative to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section XI Examination Requirement for Class 1 and 2 Piping Welds
ULNRC-05822, CFR 50.55a Request: Proposed Alternative to ASME Section XI Requirements Regarding Performance of Second Successive Examination for Indication on C Cold Leg Safe-End to Elbow Weld
NG-11-0320, Fourth 10-Year Inservice Inspection Plan
SBK-L-11164, End of Second 10-Year ISI Interval Relief Requests for Examinations with Limited Coverage
CP-201101031, Transmittal of Unit 1 Inservice Inspection Program Plan, Revision 0 (Unit 1: ASME Code XI 1998 Edition, 1999 and 2000 Addenda, Interval Start - August 13, 2010, Third Interval)
SBK-L-11132, Submittal of Third Ten-Year Interval Inservice Inspection and Second Ten-Year Containment Inservice Inspection Program
CP-201100772, Response to Request for Additional Information, Relief Requests Nos. B-10 and B-11
NOC-AE-11002645, Request for Relief from ASME Section XI Code Requirements for Weld Examinations (Revision 2) Relief Request RR-ENG-2-55
BSEP 11-0027, Response to Request for Additional Information Regarding Proposed Alternatives for the Third 10-Year Inservice Inspection Program
2CAN011108, Withdrawal of Request for Alternative Pertaining to the Use of Code Case N-578
RC-18-0036, (Vcsns), Unit 1 - Relief Request RR-4-13, Use of a Risk-Informed Process as an Alternative for the Selection of Class 1 and Class 2 Piping Welds - Response to Request for Additional Information
DCL-17-048, Diablo Canyon, Units 1 and 2 - Request for Approval of an Alternative to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section Xi Examination Requirements for Class 1 and 2 Piping Welds, Request for R
DCL-12-006, Diablo Canyon - Inservice Inspection Program Plan, Third 10-Year Inspection Interval, Revision 1, Cover Page Through Page 100
NL-11-032, Indian Point, Units 2 & 3, Response to Request for Additional Information on Aging Management Programs
2CAN081007, Request for Additional Information Implementation of a Risk-Informed Inservice Inspection Program Based on ASME Code Case N-716
NRC-10-0060, Response to Request for Additional Information Regarding Relief Requests for RR-A37 & RR-A30 for Inservice Inspection/Nondestructive Examination Program Third Ten-Year Interval
BSEP 10-0043, Proposed Alternatives for the Third 10-Year Inservice Inspection Program
NL-10-061, CFR 50.55a Relief Requests RR-3-49 and RR-3-50 from Examinations of Component Welds with Less than Essentially 100% Examination Coverage for Third Ten-Year Inservice Inspection Interval
NG-10-0091, Responses to Requests for Additional Information Regarding the Center License Renewal Application - Batch 4
BSEP 10-0015, Additional Information Regarding Third 10-Year Inservice Inspection Interval Request for Relief RR-43
2CAN011005, Supplement to Request for Alternative Implementation of a Risk-Informed Inservice Inspection Program Based on ASME Code Case N-716
NRC-10-0004, Submittal of the Inservice Inspection / Nondestructive Examination Program Relief Requests for the Third Ten-year Interval
2CAN011001, Request for Alternative - Implementation of a Risk-Informed Inservice Inspection Program Based on ASME Code Case N-716
BSEP 09-0024, Proposed Alternative for the Third 10-Year Inservice Inspection Program
CP-200800769, Response to Request for Additional Information, Relief Request No. B-2 for the Unit 2 Second 10 Year ISI Interval from 10CFR50.55a Inspection Requirements Due to Physical Interferences
JAFP-08-0038, Inservice Inspection Program Relief Requests Third Ten-year Interval Closeout
NL-08-053, 10 CFR 50.55a Request RR-CRV-75 - Relief from Examinations of Component Welds with Less than Essentially 100% Examination Coverage for Third-Ten Year Inservice Inspection Interval Closeout
L-08-066, Inservice Inspection Program Relief Requests IR-043, Revision 1, IR-055, IR-056, and IR-057
L-PI-07-037, 10 CFR 50.55a Request 1-RR-4-6 for the Prairie Island, Unit 1, Fourth Ten-year Interval Inservice Inspection Program
CNRO-2007-00009, Arkansas One, Unit 1 - Request for Alternative ANO1-ISI-008, Request to Extend the Current ASME Inservice Inspection Interval in Accordance with NRC Information Notice 98-44
CNRO-2007-00011, Request for Alternative W3-ISI-002, Request to Extend the Current ASME Inservice Inspection Interval in Accordance with NRC Information Notice 98-44
CNRO-2007-00004, Supplement to Request for Alternative RBS-ISI-005
CNRO-2006-00051, Response to Request for Additional Information Concerning Request for Alternative GG-ISI-003
CNRO-2006-00043, Request for Alternative GG-ISI-002, Request to Use ASME Code Case N-716
CPSES-200601676, Revised Response to Request for Additional Information, Relief Request A-1 for Unit 2 Inservice Inspection for Application of Alternative to ASME Boiler and Pressure Vessel Code Section XI Examination Requirements for Class 1 & 2 Pip
NG-06-0439, Fourth 10-Year Inservice Inspection Plan
HNP-05-049, Relief Request to Use a Risk-Informed Inservice Inspection Program for Class 1 and 2 Piping Welds
LR-N05-0072, Response to Request for Additional Information Regarding Proposed Alternatives to American Society of Mechanical Engineers Boiler and Pressure Vessel Code Requirements
3F1009-05, Response to Request for Additional Information on the Third 10-Year Inservice Inspection Interval Requests for Relief 09-001-II, 09-002-II and 09-003-II
3F0508-06, Inservice Inspection Program Plan, Ten Year Update Response to Request for Additional Information
3F0705-03, Response to Request for Additional Information Regarding Third 10 Year Inservice Inspection Program
L-PI-04-133, Relief Request to Implement Risk-Informed Inservice Inspection (ISI) Scheduling for the Fourth 10-Year Inspection Interval
LR-N04-0533, Request for Additional Information Regarding Relief Request HC-RR-12-W01 Proposed Alternative Repair Method
3F1104-02, Third 10-Year Inservice Inspection Program - Request for Approval of Risk-Informed Inservice Inspection Program for Class 1, ASME Code, Category B-J and B-F Piping Welds
L-MT-04-050, Fourth Interval Inservice Inspection Examination Plan, Revision 2
RC-04-0148, Request to Use Alternatives to ASME Code Requirements in Plant Third Inservice Inspection Interval (RR-111-01, RR-111-02)
NLS2004091, Response to Request for Additional Information Regarding Risk-Informed Relief Request RI-34
LR-N04-0371, Response to RAI Regarding Request for Authorization to Use a Risk-informed Inservice Inspection Alternative to the Asme Boiler and Pressure Vessel Code Section XI Requirements for Class 1 and 2 Piping
LR-N04-0366, Response to Request for Additional Information Regarding Request for Authorization to Use a Risk-informed Inservice Inspection Alternative to the Asme Boiler and Pressure Vessel Code Section XI Requirements
NLS2004023, Risk-Informed Inservice Inspection Program (Relief Request RI-34)
LR-N04-0055, Submittal of the 90-Day Report for Inservice Inspection Activities Conducted During the Thirteenth Refueling Outage
NL-03-078, Relief Request RR 63, Risk-Informed Inservice Inspection (RI-ISI) Program
L-MT-03-004, Change to Inservice Program Plan & Inservice Inspection Examination Plan 10-Year Intervals
LR-N02-0436, Request for Authorization to Use a Risk-Informed Inservice Inspection Alternative to the ASME Boiler and Pressure Vessel Code Section XI Requirements for Class 1 and 2 Piping
RC-02-0161, Application of the EPRI Risk-Informed ISI Methodology to: VC Summer (Class 1 and 2), Risk Ranking Results - Table 5-2
NRC 2002-0059, Submittal of Request for Relief No. 3 Risk-Informed Inservice Inspection Program
NG-02-0259, Submittal of Proposed Risk Informed Inservice Inspection Program for the Duane Arnold Energy Center
L-19-143, Impractical American Society of Mechanical Engineers Boiler and Pressure Vessel Code Section XI Examination Requirements
0CAN052003, Relief Request Number EN-20-RR-001 - Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and Treatment for Repair/Replacement Activities in Class 2 and 3 Systems, Section XI, Division 1
0CAN112001, Relief Request No. EN-20-RR-001, Revision 1 - Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and Treatment for Repair/ Replacement Activities in Class 2 and 3 Systems, Section XI, Div 1
CP-202100143, (CPNPP) - Relief Request 1A4-3 for Continued Use of a Risk-Informed Process as an Alternative for the Selection of Class 1 and 2 Piping Welds for Unit 1 Inservice Inspection
2CAN099706, Forwards Results of Pilot Plant Application Study Performed at Ano,Unit 2 for Review.Prompt Staff Review Is Requested. Formal Request for NRC Approval Will Be Made Following Submittal of Svc Water Sys Risk Evaluation in Dec 1997
1CAN059902, Responds to NRC 990406 RAI Re risk-informed Inservice Insp Pilot Application,Submitted 980603.Approval of Alternative Is Requested Prior to End of July 1999,to Allow Sufficient Time for Util to Revise ANO-1 ISI Program
2CAN109801, Forwards Addl Info in Support of risk-informed Inservice Insp Pilot Application Submitted in Licensee 970930 & s.Pilot Plant Application Is to Be Used as Alternative, Per 10CFR50.55(a)(3)(i),to Certain ASME Requirements
HL-5839, Forwards Three New & One Revised Relief Requests for Third 10-year Interval ISI Program for Plant,Developed to Clarify Documentation Requirements,To Propose Alternate Exam Requirements IAW ASME Code Cases N-598 & N-573
RA-23-0051, Response to Request for Additional Information (RAI) Regarding Proposed Alternative to Use American Society of Mechanical Engineers Code Case N-752, Risk-Informed Categorization and Treatment for Repair/Replacement Activities
NRC-24-0050, Inservice Inspection-Nondestructive Examination (ISI-NDE) Program for the Fourth 10-Year Inspection Interval
CPSES-200601296, Response to RAI, Relief Request A-1 for the Unit 2 Inservice Inspection for Application of an Alternative to the ASME Boiler and Pressure Vessel Code Section XI Examination Requirements for Class 1 and 2 Piping Welds
CPSES-200502480, Relief Request A-1 for Unit 2 Inservice Inspection for Application of Alternative to ASME Boiler and Pressure Vessel Code Section XI Examination Requirements for Class 1 and 2 Piping Welds (Interval Start Date - August 3, 2004
NRC 2005-0071, Response to Request for Additional Information Regarding the Point Beach Nuclear Plant License Renewal Application
NRC 2005-0044, Response to Request for Additional Information Regarding the Plant License Renewal Application
NRC-23-0030, Inservice Inspection-Nondestructive Examination (ISI-NDE) Program for the Fourth 10-Year Inspection Interval
LR-N04-0036, Correction PSEG Letter LR-N04-0036, Risk-Informed Inservice Inspection Submittal
LR-N21-0066, Submittal of Relief Request Associated with the Fourth Inservice Inspection (ISI) Interval Limited Examinations