Information Notice 1998-44, Ten-Year Inservice Inspection (ISI) Program Update for Licensees That Intend to Implement Risk-Informed ISI of Piping
BVY 14-063, Relief Request ISI-06 Inservice Inspection Limited Examinations for the Fourth Ten-Year Interval Vermont Yankee Nuclear Power Station
NOC-AE-12002837, Response to Request for Additional Information: Application of an Alternative to Requirements for Examination of Class 1 and Class 2 Piping Welds (Relief Request RR-ENG-3-04)
NG-10-0091, Responses to Requests for Additional Information Regarding the Center License Renewal Application - Batch 4
1CAN021002, Response to Second Set of Requests for Additional Information on the Third 10-Year Inservice Inspection Interval Relief Requests
1CAN060902, Request for Alternative Implementation of a Risk-Informed Inservice Inspection Program Based on ASME Code Case N-716
NOC-AE-09002381, Inservice Inspection Summary Report - 2RE13
BVY 07-061, Summary Reports for Inservice Inspection and Repairs or Replacements
CNRO-2007-00009, Arkansas One, Unit 1 - Request for Alternative ANO1-ISI-008, Request to Extend the Current ASME Inservice Inspection Interval in Accordance with NRC Information Notice 98-44
BVY 06-013, Summary Reports for In-Service Inspection and Repairs or Replacements
BVY 04-118, Technical Specification Proposed Change No. 270 Administrative Changes
BVY 04-116, Summary Reports for In-service Inspection and Repairs or Replacements
LR-N04-0371, Response to RAI Regarding Request for Authorization to Use a Risk-informed Inservice Inspection Alternative to the Asme Boiler and Pressure Vessel Code Section XI Requirements for Class 1 and 2 Piping
LR-N04-0366, Response to Request for Additional Information Regarding Request for Authorization to Use a Risk-informed Inservice Inspection Alternative to the Asme Boiler and Pressure Vessel Code Section XI Requirements
0CAN052003, Relief Request Number EN-20-RR-001 - Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and Treatment for Repair/Replacement Activities in Class 2 and 3 Systems, Section XI, Division 1
0CAN112001, Relief Request No. EN-20-RR-001, Revision 1 - Proposed Alternative to Use ASME Code Case N-752, Risk-Informed Categorization and Treatment for Repair/ Replacement Activities in Class 2 and 3 Systems, Section XI, Div 1
1CAN069804, Submits Results of Pilot Plant Application Study Performed at Unit 1 for NRC Review.Submittal Provides Pilot Application Based on ASME Code Case N-560.Calculations NSD-024 & EPRI-116-310 & Rept SIR-98-055,encl
0CAN039809, Forwards Rev 0 to Calculation NSD-023,rev 0 to SIR-98-011 & Rev 0 to SIR-98-026 Which Comprise Risk Evaluation for Svc Water Sys.Nrc Approval Is Requested by 981031.Limited Scope Application Will Be Submitted by 980529
1CAN059902, Responds to NRC 990406 RAI Re risk-informed Inservice Insp Pilot Application,Submitted 980603.Approval of Alternative Is Requested Prior to End of July 1999,to Allow Sufficient Time for Util to Revise ANO-1 ISI Program
2CAN109801, Forwards Addl Info in Support of risk-informed Inservice Insp Pilot Application Submitted in Licensee 970930 & s.Pilot Plant Application Is to Be Used as Alternative, Per 10CFR50.55(a)(3)(i),to Certain ASME Requirements
BVY-98-114, Provides Response to Request for Addl Info Re Implementation of ASME Code N560 at Plant
BVY-97-105, Provides NRC W/Degradation Mechanism Evaluation & Results of Element & Segment Risk Rankings.Util Intends to Submit Revised ISI Program Following NRC Review of Evaluations & Risk Ranking,As Stated in Ltr
BVY-98-138, Forwards Addl Info Requested During 980826 Conference Call Re Implementation of ASME Code Case N560 at Plant
PLA-5724, Proposed Relief Request No. RR-27 to the Second 10-Year Inservice Inspection Program
NL-03-183, Stations - Relief Request to Use ASME Code Case N-663
BSEP 04-0007, Request to Use ASME Boiler and Pressure Vessel Code Case N-663
CNRO-2002-00056, Request to Use ASME Code Case N-663 for Arkansas Nuclear One, Unit 1, Waterford, Unit 3, Grand Gulf, and River Bend Station
1CAN070805, Transmittal of Supplemental Information Related to Request to Use Code Case N-716 for Relief from ASME Section XI Requirements
GO2-04-065, Request to Incorporate ASME Code Case N-663 in Columbias Second Ten-Year Interval Inservice Inspection Program Plan