NL-16-2707, Units 1 and 2; Fourth 10-year Interval In-service Inspection Program ISI Program Update: Notification of Impractical ASME Code Requirements (NL-16-2707)
NLS2105025, 10 CFR 50.55a Requests for Fifth Ten-Year Inservice Inspection Interval
RBG-47110, Inservice Inspection Plan for the Third 10-Year Interval
PLA-6550, Comment (19) of T. S. Rausch on Behalf of PPL Susquehanna, LLC Re Draft Regulatory Guides; DG-1191, DG-1192 and DG-1193
L-09-179, Response to Requests for Additional Information Related to Alternative Dissimilar Metal Weld Repair Methods
L-09-020, 10 CFR 50.55a Requests for Alternative Dissimilar Metal Weld Repair Methods for Reactor Vessel Nozzles, Reactor Coolant Pump Nozzles, and Reactor Coolant Piping
W3F1-2019-0011, Response to U.S. Nuclear Regulatory Commission Request for Additional Information Regarding Relief Request WF3-RR-19-1 for Application of Dissimilar Metal Weld Full Structural Weld Overlay
NLS2005003, Response to Request for Additional Information Regarding Relief Request RI-35 Cooper Nuclear Station
ET 06-0042, Response to the September 20, 2006 NRC Request for Additional Information Regarding 10 CFR 50.55a Request I3R-05
SVP-99-021, Quarterly Summary SER of Changes,Tests & Experiments Completed, Covering Period of 981101-990131,IAW 10CFR50.59 & 10CFR50.71(e).With
SVP-98-376, Submits to Nrc,Comed Root Cause Analysis Concerning Flaw Indications in Unit 1 Reactor Recirculation Sys Piping Requested in .Plan Will Be Submitted by 990331, as Discussed in 981204 Telcon.With Five Oversize Drawings
SVP-98-353, Forwards Licensee Assessment of Flaw Indications Found in IGSCC Susceptible Welds in Plant Primary Sys Piping,Summary of Weld Overlay Repair Designs & Detailed Evaluations for Flaw Indications That Util Proposes to Leave as-is
ULNRC-03580, Forwards 10CFR50.59 Annual Rept Summaries for 1996, Summarizing Written Safety Evaluation of Changes,Tests & Experiments Approved & Implemented for Activities at Plant
BSEP-97-0104, Requests NRC Concurrence of Plan to Resume Exam Schedule of Table IWB-2500-1 of ASME Code,Section Xi,For Insp of Category E Welds.Evaluation Rept on Weld Overlay Repairs, Encl
BSEP-95-0043, Forwards Rev 1 to Calculation CPL-34Q-301, Weld Overlay Repair Design for BSEP Unit 1 Feedwater Safe-End Welds. Repairs Will Be Implemented Only If Defects Require Repair
PY-CEI-NRR-2396, Provides post-examination Results of Weld Overlay Repair for FW Nozzle to safe-end Weld at Pnpp.Info Supplements Licensee 990325 & 0401 Ltrs Submitted to NRC That Requested Approval of Repair Plan for 1B13-N1C-KB FW Nozzle to safe-en
PY-CEI-NRR-2384, Provides Supplemental Info Re 990325 Request for Approval of Repair Plan for Feedwater Nozzle to safe-end Weld. Clarification Provided on Listed Three Items,Per 990329 Telcon with NRC
PY-CEI-NRR-2380, Requests Approval of Attached Repair Plan for Feedwater Nozzle to safe-end Weld N4C-KB.Proposed Weld Overlay Design & Installation Plan Details Included in Attachment 1. Attachment 2 Provides Applicable Preliminary Weld Procedure
3F0308-04, Relief Request 08-001-RR, Revision 1
JAFP-08-0099, Request for Relief (RR-7) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
TMI-10-100, Submittal of Relief Request RR-10-02 Re Weld Overlay of the Pressurizer Spray Nozzle to Safe-End & Safe-End to Elbow Dissimilar Metal Welds
TMI-11-061, ISI Program Plan, Fourth Ten-Year Inspection Interval
GNRO-2012/00040, Relief Request ISI-17 Repair Plan for Lsi Weld N06B-KB
JAFP-17-0010, Proposed Alternative to ASME Code Requirements for Weld Overlay Repair, RR-21
JAFP-08-0102, Request for Relief (RR-7 Revision 1) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
05000483/LER-1995-006, :on 951002,plant Had to Be Shutdown Due to Excessive RCS Leakage & FW Isolation Signal Due to High SG Level.Applied Weld Overlay Per ASME Code Case N-504