AMETEK
AMETEK# QUERY24fef98b82cdd9ed1946dfc7f6d3d9b9
AMETEK# QUERYa15ebd005bc5e73e231ab9724ff9bfc2
AMETEK# QUERY0593d391b5c4de87c783a9ecf1713eac
AMETEK# QUERY6e1ec13efc3e980b44e5d627349817aa
AMETEK# QUERYfa0bbb51eec72090af45c86e68e6705f
AMETEK# QUERY621dc6bd11c77482b3c0476fd8fbebb4
AMETEK# QUERY34d80f45550f80b94deec8a7afb57f3b
AMETEK# QUERYe8fc684bc356844a0cf9880a5fda15f0
L-88-311, Forwards Response to NRC Bulletin 87-002,Suppl 2 Re Fastener Testing to Determine Conformance W/Applicable Matl Specs, Consisting of Primary Suppliers,Secondary Suppliers & non-safety Suppliers Lists
RIS 2014-07, Regulatory Issue Summary (RIS) 2014-07, Enhancements to the Vendor Inspection Program- Vendor Information Request. Part 2 of 5
RIS 2014-07, Regulatory Issue Summary (RIS) 2014-07, Enhancements to the Vendor Inspection Program- Vendor Information Request. Part 1 of 5
RIS 2014-07, Regulatory Issue Summary (RIS) 2014-07, Enhancements to the Vendor Inspection Program- Vendor Information Request. Part 3 of 5
RIS 2014-07, Regulatory Issue Summary (RIS) 2014-07, Enhancements to the Vendor Inspection Program- Vendor Information Request. Part 4 of 5
BYRON 2016-0120, Submittal of Report of Changes, Tests and Experiments for Evaluations Implemented for the Time Period 01/01/2014 - 11/30/2016
CP-201400736, Submittal of Regulatory Issue Summary (RIS) 2014-07 Requested Information
GO2-15-081, Supplement to Exigent License Amendment Request - Extension of Implementation Period for Amendment 232
LIC-14-0039, Refueling Outage Inservice Inspection Results
AEP-NRC-2014-50, Response to Regulatory Issue Summary 2014-07 Enhancements to the Vendor Inspection Program - Vendor Information Request
GO2-20-063, Exigent License Amendment Request for Extension of Implementation Period for Amendment 255 Change to Control Room Air Conditioning System
RA-24-0209, Regulatory Conference, Additional Supporting Information
05000373/LER-1984-002-03, :on 840106,unit Scrammed on Low Water Level Following Trip of Turbine Driven Reactor Feed Pump on High Seal Temp.Caused by Failed Flow Controller Which Regulates Seal Water Temp.Controller Replaced
ET 19-0019, Response to Request for Additional Information Revision to Technical Specification 3.3.5, Loss of Power (LOP) Diesel Generator (DG) Start Instrumentation
05000316/LER-1992-008, :on 920928,Unit 2 Train B Emergency DG Tripped on Low Lube Oil Pressure Immediately After Starting.Caused by Oil Level Below Admin Limit.Lube Oil Tank Level Restored to Its Normal Operating Range
05000316/LER-1992-008-01, :on 920928,EDG Tripped on lo-lo Lube Oil Pressure 24 After Start.Caused by Abnormally Low Level of Oil in Lube Oil Sump Tank.Tank Level Restored to Normal Operating Range & Mechanical Seal Replaced
L-83-231, Provides Util Position Re Use of Flame Impingement Shields Inside Containment for Protecting Cable Trays.Evaluation Delineates Trays Requiring Protection & Matl to Be Used.Addl Level of Fire Protection to Be Installed Inside Containment
GO2-15-075, Exigent License Amendment Request - Extension of Implementation Period for Amendment 232 Changing Technical Specification Table 3.3.1.1-1 Function 7 Scram Discharge Volume Water Level-High
05000424/LER-2013-001, Unit 1, Regarding Failure to Comply with Technical Specification LCO 3.8.4
05000333/LER-2009-008, Regarding High Pressure Coolant Injection System Inoperable Longer than Allowed by Technical Specifications
05000333/LER-2009-007-06, James A. Fitspatrick Regarding Inoperable High Pressure Coolant Injection System