ML21264A163: Difference between revisions
StriderTol (talk | contribs) (StriderTol Bot change) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
| Line 15: | Line 15: | ||
=Text= | =Text= | ||
{{#Wiki_filter:}} | {{#Wiki_filter:CRUD: Another Acronym Bites the Dust Chalk River Unidentified Deposits (CRUD). The nuclear industry loves its acronyms, and the myth behind CRUDa term for corrosion particles that become radioactiveis almost as fabled as Safety Control Rod Axe Man (SCRAM). But in reality, crud, like scram, is not an acronym at all, but popular slang appropriated by Manhattan Project personnel. | ||
The idea that crud was an acronym came from a 1959 article by Commander E.E. Kintner. In 1953, Kintner headed the Advanced Design Group under Hyman Rickover developing the Mark I prototype reactor for the first nuclear powered submarine, the Nautilus. To verify that the reactors fuel elements would not corrode, Kintner recalled, samples were placed in a research reactor located at Chalk River, Canada. After several months of irradiation, the fuel elements were covered in depositsChalk River Unidentified Deposits. This was worrisome since the deposits might block the flow of coolant around the fuel causing them to overheat and melt. While the problem was resolved by adjusting water chemistry, CRUD lived on as an acronym for radioactive deposits. | |||
Crud was a term used early by the Hanford Engineering Works. Kintner likely did not know that by 1953 the word crud had already been in use for nearly a decade at Atomic Energy Commission facilities. The word appeared in a technical manual as early as May 1944 at in the Hanford Engineering Works in Washington State. The manual described the use of chemical treatments to seep insoluble crud and mud from the solution. By 1947, crud was a common enough in the AEC that reports from Hanford and Oak Ridge no longer used quotation marks to describe the crud deposition problem. | |||
Thus, CRUD is really an example of a backronym where words are identified to fit the letters of an existing word. | |||
So, why was crud used to describe radioactive deposits in the first place? Crud was a common word well before World War II that likely derives from the Welsh cryd, meaning disease or plague. By the early 1930s, crud became slang for unpalatable food, filth, a sloppily dressed man or an illness, as in, Ive got the crud. By World War II, soldiers called any unknown illness the crud, and a comic book of the era featured a Corporal Crud as one of its characters. | |||
It seems likely that the negative connotations of crud made it a fitting descriptor for contamination associated with radioactive deposits. The etymology of scram and crud, then, reveals how Manhattan Project workers tried to make sense of the uncommon new world of the atom through common language. | |||
By Thomas Wellock, NRC Historian}} | |||
Revision as of 15:07, 18 January 2022
| ML21264A163 | |
| Person / Time | |
|---|---|
| Issue date: | 09/21/2021 |
| From: | Thomas Wellock Office of Public Affairs |
| To: | |
| References | |
| Download: ML21264A163 (1) | |
Text
CRUD: Another Acronym Bites the Dust Chalk River Unidentified Deposits (CRUD). The nuclear industry loves its acronyms, and the myth behind CRUDa term for corrosion particles that become radioactiveis almost as fabled as Safety Control Rod Axe Man (SCRAM). But in reality, crud, like scram, is not an acronym at all, but popular slang appropriated by Manhattan Project personnel.
The idea that crud was an acronym came from a 1959 article by Commander E.E. Kintner. In 1953, Kintner headed the Advanced Design Group under Hyman Rickover developing the Mark I prototype reactor for the first nuclear powered submarine, the Nautilus. To verify that the reactors fuel elements would not corrode, Kintner recalled, samples were placed in a research reactor located at Chalk River, Canada. After several months of irradiation, the fuel elements were covered in depositsChalk River Unidentified Deposits. This was worrisome since the deposits might block the flow of coolant around the fuel causing them to overheat and melt. While the problem was resolved by adjusting water chemistry, CRUD lived on as an acronym for radioactive deposits.
Crud was a term used early by the Hanford Engineering Works. Kintner likely did not know that by 1953 the word crud had already been in use for nearly a decade at Atomic Energy Commission facilities. The word appeared in a technical manual as early as May 1944 at in the Hanford Engineering Works in Washington State. The manual described the use of chemical treatments to seep insoluble crud and mud from the solution. By 1947, crud was a common enough in the AEC that reports from Hanford and Oak Ridge no longer used quotation marks to describe the crud deposition problem.
Thus, CRUD is really an example of a backronym where words are identified to fit the letters of an existing word.
So, why was crud used to describe radioactive deposits in the first place? Crud was a common word well before World War II that likely derives from the Welsh cryd, meaning disease or plague. By the early 1930s, crud became slang for unpalatable food, filth, a sloppily dressed man or an illness, as in, Ive got the crud. By World War II, soldiers called any unknown illness the crud, and a comic book of the era featured a Corporal Crud as one of its characters.
It seems likely that the negative connotations of crud made it a fitting descriptor for contamination associated with radioactive deposits. The etymology of scram and crud, then, reveals how Manhattan Project workers tried to make sense of the uncommon new world of the atom through common language.
By Thomas Wellock, NRC Historian