|
|
| Line 19: |
Line 19: |
|
| |
|
| =Text= | | =Text= |
| {{#Wiki_filter:ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (page 3 of 5) Engineered Safety Feature Actuation System Instrumentation' FUNCTION APPLICABLE MODES OR OTHER SPECIFIED CONDITIONS REQUIRED CHANNELS CONDITIONS SURVEILLANCE REQUIREMENTS ALLOWABLE VALUE (a) 4. Steam Line Isolation (continued) | | {{#Wiki_filter:ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (page 3 of 5) |
| : e. Steam Line Pressure (1 ) Low 1,2(i),3(b)(i) 3 per steam line 0 SR 3.3.2.1 SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 571 psig(c) (2) Negative Rate High 3(g)(i) 3 per steam line 0 SR 3.3.21 SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 s 125(h) psi 5. Turbine Trip and FeedWaler Isolation | | Engineered Safety Feature Actuation System Instrumentation' APPLICABLE MODES OR OTHER SPECIFIED REQUIRED SURVEILLANCE ALLOWABLE FUNCTION CONDITIONS CHANNELS CONDITIONS REQUIREMENTS VALUE (a) |
| : a. Automatic Actuation Logic and Actuation Relays (SSPS) 1,20),3(j) 2 trains G SR 3.3.22 SR 3.3.2.4 SR 3.3.2.6 SR 3.3.214 NA b. Automatic Actuation Logic (MSFIS) I.Z(k),3(k) 2 trains G SR 3.3.26 NA c. SG Water Level -High High (P.14) 1,2(j) 4 per SG SR 3.3.2.1 SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 of Narrow Range Instrument Span d. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requiremenlS. (continued) (a) The Allowable Value defines Ihe Limiling Safely System Setting. See Ihe Bases for the Trip Setpoints. (b) Above the P-ll (Pressurizer Pressure) | | : 4. Steam Line Isolation (continued) |
| Inlerlock and below P-ll unless the Function is blocked. (c) Time constants used in tt1e lead/lag controller are \, 50 seconds and t2 s 5 seconds. Below the p." (Pressurizer Pressure) | | : e. Steam Line Pressure (1 ) Low 1,2(i),3(b)(i) 3 per steam 0 SR 3.3.2.1 ~ 571 psig(c) line SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 (2) Negative Rate 3(g)(i) 3 per steam 0 SR 3.3.21 s 125(h) psi High line SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 |
| Interlock; however, may be blocked below P-l1 when safety injection on low steam line pnessune is not blocked. (h) Time constant utilized in the rate/lag controller is ?: 50 seconds. (i) Except when all MS1Vs are closed. Except when all MFIVs are closed and de-activated; and all MFRVs are closed and de-activated or closed and isolated by a closed manual valve; and all MFRV bypass valves are closed and de*activated, or closed and isolated by a closed manual valve, or isolated.by two closed manual valves. (k) Except when all MFIVs are closed and de-activated. | | : 5. Turbine Trip and FeedWaler Isolation |
| Wolf Creek -Unit 3.3-34 Amendment No. 12J, 132, 175, 177 ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (Page 4 of 5) Engineered Safety Feature Actuation System Inslrumentalion FUNCTION APPLICABLE MODES OR OTHER SPECIFIED CONDITIONS REQUIRED CHANNELS CONDITIONS SURVEILLANCE REQUIREMENTS ALLOWABLE VALUE (a) 6. Auxiliary Feedwater | | : a. Automatic Actuation 1,20),3(j) 2 trains G SR 3.3.22 NA Logic and Actuation SR 3.3.2.4 Relays (SSPS) SR 3.3.2.6 SR 3.3.214 |
| : a. Manual Initiation 1,2,3 1 per pump 0 SR 3.3.2.8 NA b. Automatic Actuation Logic and Actuation Relays (Solid State Protection System) 1.2,3 2 trains G SR 3.322 SR 3.3.2.4 SR 3.32.6 NA c. Aulomatic Actuation Logic and Actuation Relays (Balance 01 Plant ESFAS) 1,2.3 2 trains N SR 3.3.23 NA d. SG Water Level Low* Low 1,2,3 4 per SG 0 SR 3.321 SR 3.3.2.5 SR 3,32.9 SR 3.3210 22.3% of Narrow Range Instrument Span e. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requirements.
| | : b. Automatic Actuation I.Z(k),3(k) 2 trains G SR 3.3.26 NA Logic (MSFIS) |
| : f. Loss of Offslle Power 1.2.3 2 trains P SR 3.3.27 SR 3.32.10 NA g. Trip of all Main Feedweler Pumps 2 per pump J SR 33,2,8 NA h. Auxiliary Feedwater Pump Suction Transfer on Suction Pressure*
| | : c. SG Water Level -High 1,2(j) 4 per SG SR 3.3.2.1 ~79.7% of High (P.14) SR 3.3.2.5 Narrow Range SR 3.3.2.9 Instrument Span SR 3.3.2.10 |
| Low 1,2.3 3 M SR 33,2.1 SR 3.3.2.9 SR 3.3.2.10 SR 3.3.2.12 2: 20.53 pSia (continued) (a) The Allowable Value defines the Limiting Safety System Setling. See the Bases for the Trip Selpoints, Wolf Creek -Unit 1 3.3-35 Amendment No. 136 MFIVs and MFRVs and MFRV Bypass Valves I 3.7.3 3.7 PLANT SYSTEMS Main Feedwater Isolation Valves (MFIVs) and Main Feedwater Regulating Valves (MFRVs) and MFRV Bypass Valves LCO Each MFIV and its associated actuator trains, MFRV and MFRV bypass valve for the four main feedwater lines shall be OPERABLE.
| | : d. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requiremenlS. |
| MODE 1 MODES 2 and 3, except for each affected main feedwater line when: The MFIV is closed and deactivated; or The MFRV is closed and deactivated or closed and isolated by a closed manual valve; and the MFRV bypass valve is either closed and deactivated, closed and isolated by a closed manual valve, or isolated by two closed manual valves. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One MFIV actuator train inoperable.
| | (continued) |
| A.1 Restore MFIV actuator train to OPERABLE status. 7 days B. Two MFIV actuator trains inoperable for different MFIVs when the inoperable actuator trains are not in the same separation group. B.1 Restore one MFIV actuator train to OPERABLE status. 72 hours C. Two MFIV actuator trains inoperable when the inoperable actuator trains are in the same separation group. C.1 Restore one MFIV actuator train to OPERABLE status. 24 hours (continued)
| | (a) The Allowable Value defines Ihe Limiling Safely System Setting. See Ihe Bases for the Trip Setpoints. |
| \
| | (b) Above the P-ll (Pressurizer Pressure) Inlerlock and below P-ll unless the Function is blocked. |
| | (c) Time constants used in tt1e lead/lag controller are \, ~ 50 seconds and t2 s 5 seconds. |
| | (g) Below the p." (Pressurizer Pressure) Interlock; however, may be blocked below P-l1 when safety injection on low steam line pnessune is not blocked. |
| | (h) Time constant utilized in the rate/lag controller is ?: 50 seconds. |
| | (i) Except when all MS1Vs are closed. |
| | (j) Except when all MFIVs are closed and de-activated; and all MFRVs are closed and de-activated or closed and isolated by a closed manual valve; and all MFRV bypass valves are closed and de*activated, or closed and isolated by a closed manual valve, or isolated. by two closed manual valves. |
| | (k) Except when all MFIVs are closed and de-activated. |
| | Wolf Creek - Unit 1 3.3-34 Amendment No. 12J, 132, 175, 177 |
|
| |
|
| 3.7.3 MFIVs and MFRVs and MFRV Bypass Valves SURVEILLANCE REQUIRMENTS (continued) | | ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (Page 4 of 5) |
| SURVEILLANCE FREQUENCY SR 3.7.3.2 Only required to be performed in MODES 1 and 2. Verify each actuator train actuates the MFIV to the isolation position on an actual or simulated actuation signal. 18 months SR 3.7.3.3 ------------------------N Only required to be performed in MODES 1 and 2. Verify each MFRV and MFRV bypass valve actuates to the isolation position on an actual or simulated actuation signal. 18 months Wolf Creek -Unit 1 3.7-11 Amendment No. 123, 171, 177 ARVs 3.7.4 3.7 PLANT 3.7.4 Atmospheric Relief Valves LCO 3.7.4 Four ARV lines shall be APPLICABILITY: | | Engineered Safety Feature Actuation System Inslrumentalion APPLICABLE MODES OR OTHER SPECIFIED REQUIRED SURVEILLANCE ALLOWABLE FUNCTION CONDITIONS CHANNELS CONDITIONS REQUIREMENTS VALUE (a) |
| MODES 1, 2, and 3. ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One ARV line inoperable for reasons other than excessive leakage. A.1 Restore required ARV line to OPERABLE status. 7 days B. Two ARV lines inoperable for reasons other than excessive leakage. B.1 Restore all but one required ARV line to OPERABLE status. 72 hours C Three or more ARV lines inoperable for reasons other than excessive leakage. C.1 Restore all but two ARV lines to OPERABLE status. 24 hours (continued) | | : 6. Auxiliary Feedwater |
| Wolf Creek -Unit 1 3.7-12 Amendment No. 123, 127, 155, 171, 177 I}} | | : a. Manual Initiation 1,2,3 1 per pump 0 SR 3.3.2.8 NA |
| | : b. Automatic Actuation 1.2,3 2 trains G SR 3.322 NA Logic and Actuation SR 3.3.2.4 Relays (Solid State SR 3.32.6 Protection System) |
| | : c. Aulomatic Actuation 1,2.3 2 trains N SR 3.3.23 NA Logic and Actuation Relays (Balance 01 Plant ESFAS) |
| | : d. SG Water Level Low* 1,2,3 4 per SG 0 SR 3.321 ~ 22.3% of Low SR 3.3.2.5 Narrow Range SR 3,32.9 Instrument Span SR 3.3210 |
| | : e. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requirements. |
| | : f. Loss of Offslle Power 1.2.3 2 trains P SR 3.3.27 NA SR 3.32.10 |
| | : g. Trip of all Main 2 per pump J SR 33,2,8 NA Feedweler Pumps |
| | : h. Auxiliary Feedwater 1,2.3 3 M SR 33,2.1 2: 20.53 pSia Pump Suction SR 3.3.2.9 Transfer on Suction SR 3.3.2.10 Pressure* Low SR 3.3.2.12 (continued) |
| | (a) The Allowable Value defines the Limiting Safety System Setling. See the Bases for the Trip Selpoints, Wolf Creek - Unit 1 3.3-35 Amendment No. ~, 136 |
| | |
| | MFIVs and MFRVs and MFRV Bypass Valves I 3.7.3 3.7 PLANT SYSTEMS 3.7.3 Main Feedwater Isolation Valves (MFIVs) and Main Feedwater Regulating Valves (MFRVs) and MFRV Bypass Valves LCO 3.7.3 Each MFIV and its associated actuator trains, MFRV and MFRV bypass valve for the four main feedwater lines shall be OPERABLE. |
| | APPLICABILITY: MODE 1 MODES 2 and 3, except for each affected main feedwater line when: |
| | : a. The MFIV is closed and deactivated; or |
| | : b. The MFRV is closed and deactivated or closed and isolated by a closed manual valve; and the MFRV bypass valve is either closed and deactivated, closed and isolated by a closed manual valve, or isolated by two closed manual valves. |
| | ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One MFIV actuator train A.1 Restore MFIV actuator 7 days inoperable. train to OPERABLE status. |
| | B. Two MFIV actuator trains B.1 Restore one MFIV 72 hours inoperable for different actuator train to MFIVs when the inoperable OPERABLE status. |
| | actuator trains are not in the same separation group. |
| | C. Two MFIV actuator trains C.1 Restore one MFIV 24 hours inoperable when the actuator train to inoperable actuator trains OPERABLE status. |
| | are in the same separation group. |
| | (continued) |
| | \ |
| | WLO:lf~c~r:e:ek~-~u:n~it~1 :3~.7~-8~ ~A~m~en~d~m~e~n~t-"N~o~.~1~2~3,~1'::17c.:!12-'l17,-7,--~ |
| | |
| | MFIVs and MFRVs and MFRV Bypass Valves 3.7.3 SURVEILLANCE REQUIRMENTS (continued) |
| | SURVEILLANCE FREQUENCY SR 3.7.3.2 --------------------NOTE---------------------- |
| | Only required to be performed in MODES 1 and 2. |
| | Verify each actuator train actuates the MFIV to the 18 months isolation position on an actual or simulated actuation signal. |
| | SR 3.7.3.3 ------------------------NOTE----------------------- |
| | Only required to be performed in MODES 1 and 2. |
| | Verify each MFRV and MFRV bypass valve actuates 18 months to the isolation position on an actual or simulated actuation signal. |
| | Wolf Creek - Unit 1 3.7-11 Amendment No. 123, 171, 177 |
| | |
| | ARVs 3.7.4 3.7 PLANT SYSTEMS 3.7.4 Atmospheric Relief Valves (ARVs) |
| | LCO 3.7.4 Four ARV lines shall be OPERABLE. |
| | APPLICABILITY: MODES 1, 2, and 3. |
| | ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One ARV line inoperable A.1 Restore required ARV line 7 days |
| | ~ |
| | for reasons other than to OPERABLE status. |
| | excessive leakage. |
| | B. Two ARV lines inoperable B.1 Restore all but one 72 hours for reasons other than required ARV line to excessive leakage. OPERABLE status. |
| | C Three or more ARV lines C.1 Restore all but two ARV 24 hours inoperable for reasons lines to OPERABLE other than excessive status. |
| | leakage. |
| | (continued) |
| | Wolf Creek - Unit 1 3.7-12 Amendment No. 123, 127, 155, 171, 177 I}} |
Letter Sequence Other |
|---|
TAC:MD4840, Removal of Main Steam and Main Feedwater Valve Isolation Times from Technical Specifications (Approved, Closed) |
|
MONTHYEARET 07-0040, Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls2007-09-12012 September 2007
Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls
Project stage: Response to RAI
ET 07-0050, Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls2007-10-16016 October 2007
Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls
Project stage: Response to RAI
ET 08-0005, Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls2008-01-18018 January 2008
Response to Request for Additional Information Relating to Replacement of the Main Steam and Feedwater Isolation Valves and Controls
Project stage: Response to RAI
ET 08-0011, Revisions to Proposed Changes to Technical Specification 3.7.3, Main Feedwater Isolation Valves (Mfivs)2008-02-26026 February 2008
Revisions to Proposed Changes to Technical Specification 3.7.3, Main Feedwater Isolation Valves (Mfivs)
Project stage: Request
ML0804500042008-02-29029 February 2008
Request for Withholding Information from Public Disclosure (10/8/2008 Affidavit Executed by J. A. Gresham, Westinghouse Electric Company LLC) (Tac No. MD4840)
Project stage: Withholding Request Acceptance
ML0804500102008-02-29029 February 2008
Request for Withholding Information from Public Disclosure (1/7/2008 Affidavit Executed by J. A. Gresham, Westinghouse Electric Company LLC) (Tac MD4840)
Project stage: Withholding Request Acceptance
ML0806502192008-03-21021 March 2008
License Amendment 176 Replacement of Main Stream and Feedwater Isolation Valves
Project stage: Approval
ML0803701172008-04-0303 April 2008
Issuance of License Amendment No. 177, Revise TS 3.3.2, ESFAS and TS 3.7.3, Main Feedwater Isolation Valves by Addition of Main Feedwater Regulating Valves and Associated Bypass Valves
Project stage: Approval
ML0803701212008-04-0303 April 2008
Tech Spec Pages for Amendment No. 177, Revise TS 3.3.2, ESFAS and TS 3.7.3, Main Feedwater Isolation Valves by Addition of Main Feedwater Regulating Valves and Associated Bypass Valves
Project stage: Other
ML0811201492008-04-29029 April 2008
Corrected Technical Specification Pages, Amendment No. 177 Revision to Technical Specification 3.7.3, Main Feedwater Isolation Valves, to Add Main Feedwater Regulating Valves and MFRV Bypass Valves
Project stage: Other
ML0810702772008-04-29029 April 2008
Correction to Amendment No. 177 Revision to Technical Specification 3.7.3, Main Feedwater Isolation Valves, to Add Main Feedwater Regulating Valves (MFRV) and MFRV Bypass Valves
Project stage: Other
2008-02-26
[Table View] |
|
|---|
Category:Technical Specification
MONTHYEARML24227A5562024-08-14014 August 2024
Application to Revise Technical Specifications to Adopt TSTF-569-A, Revision 2, Revision of Response Time Testing Definitions
ML24213A3352024-07-31031 July 2024
License Amendment Request to Revise Technical Specification 3.2.1, Heat Flux Hot Channel Factor (Fq(Z)) (Fq Methodology), to Implement the Methodology from WCAP-17661-P-A, Revision 1.
ML24068A1992024-03-0707 March 2024
Changes to Technical Specification Bases - Revisions 93 and 94
ML23320A2772023-11-16016 November 2023
License Amendment Request to Revise Ventilation Filter Testing Program Criteria in Technical Specification 5.5.11.b and Administrative Correction of Absorber in Technical Specification 5.5.11
ML23068A1232023-03-0909 March 2023
Changes to Technical Specification Bases – Revisions 91 and 92
ET 23-0002, Supplement to License Amendment Request to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections2023-02-0707 February 2023
Supplement to License Amendment Request to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections
ML22353A5552022-12-15015 December 2022
Application to Revise Technical Specifications to Adopt TSTF-554-A, Revision 1, Revise Reactor Coolant Leakage Requirements
ET 22-0006, Operating Corp. - Application to Revise Technical Specifications to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections2022-12-0101 December 2022
Operating Corp. - Application to Revise Technical Specifications to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections
ET 22-0012, Supplement to License Amendment Request - Diesel Generator Completion Time Extension for Technical Specification 3.8.1, AC Sources - Operating2022-07-12012 July 2022
Supplement to License Amendment Request - Diesel Generator Completion Time Extension for Technical Specification 3.8.1, AC Sources - Operating
ML22067A0302022-03-0808 March 2022
Changes to Technical Specification Bases - Revisions 86, 87, 88, 89, and 90
ML21070A0582021-03-11011 March 2021
Changes to Technical Specification Bases - Revisions 82, 83, 84, and 85
WO 20-0050, License Amendment Request to Revise Technical Specification 3.6.3 and Surveillance Requirement 3.6.3.1 to Allow Use of a Blind Flange2020-11-10010 November 2020
License Amendment Request to Revise Technical Specification 3.6.3 and Surveillance Requirement 3.6.3.1 to Allow Use of a Blind Flange
ET 20-0004, Application for Technical Specification Change Regarding Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program (TSTF-425)2020-04-27027 April 2020
Application for Technical Specification Change Regarding Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program (TSTF-425)
WO 20-0029, License Amendment Request to Revise Specification 5.5.16 for Permanent Extension of Type a and Type C Leak Rate Test Frequencies2020-04-20020 April 2020
License Amendment Request to Revise Specification 5.5.16 for Permanent Extension of Type a and Type C Leak Rate Test Frequencies
ML20070L9822020-03-0202 March 2020
Changes to Technical Specification Bases - Revisions 80 and 81
ET 19-0002, License Amendment Request to Revise Technical Specification 3.3.5, Loss of Power (LOP) Diesel Generator (DG) Start Instrumentation.2019-03-18018 March 2019
License Amendment Request to Revise Technical Specification 3.3.5, Loss of Power (LOP) Diesel Generator (DG) Start Instrumentation.
ML19078A1302019-03-11011 March 2019
Changes to Technical Specification Bases - Revisions 78 and 79
WO 19-0013, Supplement to Application to Revise Technical Specifications to Adopt TSTF-529, Clarify Use and Application Rules, Revision 42019-03-11011 March 2019
Supplement to Application to Revise Technical Specifications to Adopt TSTF-529, Clarify Use and Application Rules, Revision 4
WO 18-0044, Clean Revised Technical Specification Pages for License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of Alternative Source Term2018-11-15015 November 2018
Clean Revised Technical Specification Pages for License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of Alternative Source Term
ML18075A0242018-03-0808 March 2018
Changes to Technical Specification Bases - Revisions 76 and 77
WO 18-0004, Response to Request for Additional Information Re License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of ...2018-01-15015 January 2018
Response to Request for Additional Information Re License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of ...
ML17073A0932017-03-0909 March 2017
Changes to Technical Specification Bases - Revisions 74 and 75
ML17054C2212017-01-17017 January 2017
License Amendment Request for the Transition to Westinghouse Core Design and Safety Analyses - Revised Technical Specification Pages
ML17054C2222017-01-17017 January 2017
License Amendment Request for the Transition to Westinghouse Core Design and Safety Analyses - Proposed Technical Specification Bases Changes
ML17054C2202017-01-17017 January 2017
License Amendment Request for the Transition to Westinghouse Core Design and Safety Analyses - Proposed Technical Specification Changes
ML16076A3572016-03-10010 March 2016
Changes to Technical Specification Bases - Revisions 67 Through 73
WO 15-0051, License Amendment Request to Revise Technical Specification 3.8.1, AC Sources - Operating, Surveillance Requirements 3.8.1.10 and 3.8.1.142015-09-23023 September 2015
License Amendment Request to Revise Technical Specification 3.8.1, AC Sources - Operating, Surveillance Requirements 3.8.1.10 and 3.8.1.14
ML15077A0662015-03-11011 March 2015
Changes to Technical Specification Bases, Revisions 61 Through 66
WO 14-0092, Submittal of Technical Specification 5.6.8 - Post Accident Monitoring (PAM) Report2014-12-15015 December 2014
Submittal of Technical Specification 5.6.8 - Post Accident Monitoring (PAM) Report
ET 13-0028, Application to Revise Technical Specifications to Replace a Methodology to TS 5.6.5, Core Operating Limits Report.2013-09-23023 September 2013
Application to Revise Technical Specifications to Replace a Methodology to TS 5.6.5, Core Operating Limits Report.
ET 13-0023, License Amendment Request for the Transition to Westinghouse Core Design and Safety Analysis2013-08-13013 August 2013
License Amendment Request for the Transition to Westinghouse Core Design and Safety Analysis
ML13079A0602013-03-0808 March 2013
Changes to Technical Specification Bases - Revisions 55 and 56
ML12080A2162012-03-12012 March 2012
Changes to Technical Specification Bases - Revisions 50 Through 54
WO 11-0086, Application to Revise Technical Specification (TS) 3.8.1, AC Sources - Operating2011-11-30030 November 2011
Application to Revise Technical Specification (TS) 3.8.1, AC Sources - Operating
ML1107500362011-03-10010 March 2011
Changes to Technical Specification Bases - Revisions 45 Through 49
ML1007801282010-03-11011 March 2010
Changes to Technical Specification Bases - Revisions 41 Through 44
ML1006401412010-03-0404 March 2010
Supplemental Information for Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation, Auxiliary Feedwater - Trip of All Main Feedwater Pumps
ET 10-0011, Supplemental Information for Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation, Auxiliary Feedwater - Trip of All Main Feedwater Pumps2010-03-0404 March 2010
Supplemental Information for Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation, Auxiliary Feedwater - Trip of All Main Feedwater Pumps
ML1006400442010-03-0303 March 2010
Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation, Auxiliary Feedwater - Trip of All Main Feedwater Pumps
ET 09-0025, Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Program, and TS 5.6.10, Steam Generator Tube Inspection Report2009-09-15015 September 2009
Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Program, and TS 5.6.10, Steam Generator Tube Inspection Report
WO 09-0022, Request for Approval of Changes to the Technical Specification 3.8.1, AC Sources - Operating, Bases2009-09-0303 September 2009
Request for Approval of Changes to the Technical Specification 3.8.1, AC Sources - Operating, Bases
ML0907506242009-03-11011 March 2009
Submittal of Changes to Technical Specification Bases - Revisions 36 Through 40
WO 08-0019, Application to Revise Technical Specification 3.5.2, ECCS-Operating, in Accordance with TSTF-325-A2008-08-18018 August 2008
Application to Revise Technical Specification 3.5.2, ECCS-Operating, in Accordance with TSTF-325-A
ET 08-0041, Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation.2008-08-14014 August 2008
Revision to Technical Specification 3.3.2, Engineered Safety Feature Actuation System (ESFAS) Instrumentation.
ML0811201492008-04-29029 April 2008
Corrected Technical Specification Pages, Amendment No. 177 Revision to Technical Specification 3.7.3, Main Feedwater Isolation Valves, to Add Main Feedwater Regulating Valves and MFRV Bypass Valves
ML0807805602008-03-0707 March 2008
Changes to Technical Specification Bases - Revisions 32 Through 35
ML0804501852008-02-28028 February 2008
Withdrawal of License Amendment Request on Steam Generator Tube Inspections
WO 08-0001, Application to Revise Technical Specifications Regarding Control Room Envelope Habitability in Accordance with TSTF-448, Revision 3, Using the Consolidated Line Item Improvement Process2008-01-15015 January 2008
Application to Revise Technical Specifications Regarding Control Room Envelope Habitability in Accordance with TSTF-448, Revision 3, Using the Consolidated Line Item Improvement Process
ML0707402282007-03-0909 March 2007
Changes to Technical Specification Bases - Revisions 24 Through 31
ML0631905352006-11-15015 November 2006
Tech Spec Pages for Issuance of License Amendment 172 Regarding Revision to Technical Specification 5.5.8 on the Inservice Testing Program
2024-08-14
[Table view]
Category:Amendment
MONTHYEARML24213A3352024-07-31031 July 2024
License Amendment Request to Revise Technical Specification 3.2.1, Heat Flux Hot Channel Factor (Fq(Z)) (Fq Methodology), to Implement the Methodology from WCAP-17661-P-A, Revision 1.
ML23320A2772023-11-16016 November 2023
License Amendment Request to Revise Ventilation Filter Testing Program Criteria in Technical Specification 5.5.11.b and Administrative Correction of Absorber in Technical Specification 5.5.11
ET 23-0002, Supplement to License Amendment Request to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections2023-02-0707 February 2023
Supplement to License Amendment Request to Adopt TSTF-577-A, Revision 1, Revised Frequencies for Steam Generator Tube Inspections
ML22353A5552022-12-15015 December 2022
Application to Revise Technical Specifications to Adopt TSTF-554-A, Revision 1, Revise Reactor Coolant Leakage Requirements
ET 22-0012, Supplement to License Amendment Request - Diesel Generator Completion Time Extension for Technical Specification 3.8.1, AC Sources - Operating2022-07-12012 July 2022
Supplement to License Amendment Request - Diesel Generator Completion Time Extension for Technical Specification 3.8.1, AC Sources - Operating
WO 18-0004, Response to Request for Additional Information Re License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of ...2018-01-15015 January 2018
Response to Request for Additional Information Re License Amendment Request to Revise Technical Specifications to Transition to Westinghouse Core Design and Safety Analysis Including Adoption of ...
ML16076A3572016-03-10010 March 2016
Changes to Technical Specification Bases - Revisions 67 Through 73
WO 11-0086, Application to Revise Technical Specification (TS) 3.8.1, AC Sources - Operating2011-11-30030 November 2011
Application to Revise Technical Specification (TS) 3.8.1, AC Sources - Operating
ET 09-0025, Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Program, and TS 5.6.10, Steam Generator Tube Inspection Report2009-09-15015 September 2009
Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Program, and TS 5.6.10, Steam Generator Tube Inspection Report
WO 08-0019, Application to Revise Technical Specification 3.5.2, ECCS-Operating, in Accordance with TSTF-325-A2008-08-18018 August 2008
Application to Revise Technical Specification 3.5.2, ECCS-Operating, in Accordance with TSTF-325-A
ML0811201492008-04-29029 April 2008
Corrected Technical Specification Pages, Amendment No. 177 Revision to Technical Specification 3.7.3, Main Feedwater Isolation Valves, to Add Main Feedwater Regulating Valves and MFRV Bypass Valves
ML0804501852008-02-28028 February 2008
Withdrawal of License Amendment Request on Steam Generator Tube Inspections
WO 08-0001, Application to Revise Technical Specifications Regarding Control Room Envelope Habitability in Accordance with TSTF-448, Revision 3, Using the Consolidated Line Item Improvement Process2008-01-15015 January 2008
Application to Revise Technical Specifications Regarding Control Room Envelope Habitability in Accordance with TSTF-448, Revision 3, Using the Consolidated Line Item Improvement Process
ML0631905352006-11-15015 November 2006
Tech Spec Pages for Issuance of License Amendment 172 Regarding Revision to Technical Specification 5.5.8 on the Inservice Testing Program
ML0627804522006-10-0505 October 2006
Technical Specification Pages - Issuance of Amendment Revise Containment Sump Surveillance Requirement to Verify Strainer Integrity
ML0624201502006-08-29029 August 2006
Techncial Specification, Addition of Surveillance Requirement 3.3.1.16 to TS Table 3.3.1.16
WO 06-0023, Revision to Technical Specification 3.5.2, ECCS - Operating.2006-06-0202 June 2006
Revision to Technical Specification 3.5.2, ECCS - Operating.
ET 05-0001, Exigent Request for Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Tube Surveillance Program2005-04-18018 April 2005
Exigent Request for Revision to Technical Specification (TS) 5.5.9, Steam Generator (SG) Tube Surveillance Program
ML0507702972005-03-16016 March 2005
Tech Spec Page for Amendment 160 Revised Seal Injection Flow Rates
ML0503301602005-01-31031 January 2005
Technical Specifications, Amendment 156 Plant Protection Test Times, Completion Times and Surveillance Test Intervals
ML0503502612005-01-31031 January 2005
Tech Spec Pages for Amendment 158, Elimination of Requirements to Provide Monthly Operating Reports and Annual Occupational Radiation Exposure Reports.
WO 04-0050, Revision to Technical Specification (TS) 3.8.1, AC Sources-Operating, Diesel Generator Start Time Surveillance Requirements2004-12-13013 December 2004
Revision to Technical Specification (TS) 3.8.1, AC Sources-Operating, Diesel Generator Start Time Surveillance Requirements
WO 04-0031, Revision to Technical Specification (TS) 5.3, Unit Staff Qualifications, and Corrections to Various TSs2004-10-0707 October 2004
Revision to Technical Specification (TS) 5.3, Unit Staff Qualifications, and Corrections to Various TSs
WO 04-0027, Application for Technical Specification Improvement to Eliminate Requirements for Hydrogen Recombiners and Hydrogen Monitors Using the Consolidated Line Item Improvement Process2004-07-23023 July 2004
Application for Technical Specification Improvement to Eliminate Requirements for Hydrogen Recombiners and Hydrogen Monitors Using the Consolidated Line Item Improvement Process
WO 04-0035, Application for Technical Specification Improvement to Eliminate Requirements to Provide Monthly Operating Reports and Occupational Radiation Exposure Reports Using the Consolidated Line Item Improvement Process2004-07-23023 July 2004
Application for Technical Specification Improvement to Eliminate Requirements to Provide Monthly Operating Reports and Occupational Radiation Exposure Reports Using the Consolidated Line Item Improvement Process
WO 03-0057, Revision to Technical Specifications Regarding Extensions of AC Electrical Power Distribution Completion Time2003-10-30030 October 2003
Revision to Technical Specifications Regarding Extensions of AC Electrical Power Distribution Completion Time
ML0221200382002-07-29029 July 2002
Technical Specifications for Amendment 123, Limited Removal of Suspension of Positive Reactivity Additions
2024-07-31
[Table view] |
Text
ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (page 3 of 5)
Engineered Safety Feature Actuation System Instrumentation' APPLICABLE MODES OR OTHER SPECIFIED REQUIRED SURVEILLANCE ALLOWABLE FUNCTION CONDITIONS CHANNELS CONDITIONS REQUIREMENTS VALUE (a)
- 4. Steam Line Isolation (continued)
- e. Steam Line Pressure (1 ) Low 1,2(i),3(b)(i) 3 per steam 0 SR 3.3.2.1 ~ 571 psig(c) line SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10 (2) Negative Rate 3(g)(i) 3 per steam 0 SR 3.3.21 s 125(h) psi High line SR 3.3.2.5 SR 3.3.2.9 SR 3.3.2.10
- 5. Turbine Trip and FeedWaler Isolation
- a. Automatic Actuation 1,20),3(j) 2 trains G SR 3.3.22 NA Logic and Actuation SR 3.3.2.4 Relays (SSPS) SR 3.3.2.6 SR 3.3.214
- b. Automatic Actuation I.Z(k),3(k) 2 trains G SR 3.3.26 NA Logic (MSFIS)
- c. SG Water Level -High 1,2(j) 4 per SG SR 3.3.2.1 ~79.7% of High (P.14) SR 3.3.2.5 Narrow Range SR 3.3.2.9 Instrument Span SR 3.3.2.10
- d. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requiremenlS.
(continued)
(a) The Allowable Value defines Ihe Limiling Safely System Setting. See Ihe Bases for the Trip Setpoints.
(b) Above the P-ll (Pressurizer Pressure) Inlerlock and below P-ll unless the Function is blocked.
(c) Time constants used in tt1e lead/lag controller are \, ~ 50 seconds and t2 s 5 seconds.
(g) Below the p." (Pressurizer Pressure) Interlock; however, may be blocked below P-l1 when safety injection on low steam line pnessune is not blocked.
(h) Time constant utilized in the rate/lag controller is ?: 50 seconds.
(i) Except when all MS1Vs are closed.
(j) Except when all MFIVs are closed and de-activated; and all MFRVs are closed and de-activated or closed and isolated by a closed manual valve; and all MFRV bypass valves are closed and de*activated, or closed and isolated by a closed manual valve, or isolated. by two closed manual valves.
(k) Except when all MFIVs are closed and de-activated.
Wolf Creek - Unit 1 3.3-34 Amendment No. 12J, 132, 175, 177
ESFAS Instrumentation 3.3.2 Table 3.3.2-1 (Page 4 of 5)
Engineered Safety Feature Actuation System Inslrumentalion APPLICABLE MODES OR OTHER SPECIFIED REQUIRED SURVEILLANCE ALLOWABLE FUNCTION CONDITIONS CHANNELS CONDITIONS REQUIREMENTS VALUE (a)
- 6. Auxiliary Feedwater
- a. Manual Initiation 1,2,3 1 per pump 0 SR 3.3.2.8 NA
- b. Automatic Actuation 1.2,3 2 trains G SR 3.322 NA Logic and Actuation SR 3.3.2.4 Relays (Solid State SR 3.32.6 Protection System)
- c. Aulomatic Actuation 1,2.3 2 trains N SR 3.3.23 NA Logic and Actuation Relays (Balance 01 Plant ESFAS)
- d. SG Water Level Low* 1,2,3 4 per SG 0 SR 3.321 ~ 22.3% of Low SR 3.3.2.5 Narrow Range SR 3,32.9 Instrument Span SR 3.3210
- e. Safety Injection Refer to Function 1 (Safety Injection) for all initiation functions and requirements.
- f. Loss of Offslle Power 1.2.3 2 trains P SR 3.3.27 NA SR 3.32.10
- g. Trip of all Main 2 per pump J SR 33,2,8 NA Feedweler Pumps
- h. Auxiliary Feedwater 1,2.3 3 M SR 33,2.1 2: 20.53 pSia Pump Suction SR 3.3.2.9 Transfer on Suction SR 3.3.2.10 Pressure* Low SR 3.3.2.12 (continued)
(a) The Allowable Value defines the Limiting Safety System Setling. See the Bases for the Trip Selpoints, Wolf Creek - Unit 1 3.3-35 Amendment No. ~, 136
MFIVs and MFRVs and MFRV Bypass Valves I 3.7.3 3.7 PLANT SYSTEMS 3.7.3 Main Feedwater Isolation Valves (MFIVs) and Main Feedwater Regulating Valves (MFRVs) and MFRV Bypass Valves LCO 3.7.3 Each MFIV and its associated actuator trains, MFRV and MFRV bypass valve for the four main feedwater lines shall be OPERABLE.
APPLICABILITY: MODE 1 MODES 2 and 3, except for each affected main feedwater line when:
- a. The MFIV is closed and deactivated; or
- b. The MFRV is closed and deactivated or closed and isolated by a closed manual valve; and the MFRV bypass valve is either closed and deactivated, closed and isolated by a closed manual valve, or isolated by two closed manual valves.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One MFIV actuator train A.1 Restore MFIV actuator 7 days inoperable. train to OPERABLE status.
B. Two MFIV actuator trains B.1 Restore one MFIV 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> inoperable for different actuator train to MFIVs when the inoperable OPERABLE status.
actuator trains are not in the same separation group.
C. Two MFIV actuator trains C.1 Restore one MFIV 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> inoperable when the actuator train to inoperable actuator trains OPERABLE status.
are in the same separation group.
(continued)
\
WLO:lf~c~r:e:ek~-~u:n~it~1 :3~.7~-8~ ~A~m~en~d~m~e~n~t-"N~o~.~1~2~3,~1'::17c.:!12-'l17,-7,--~
MFIVs and MFRVs and MFRV Bypass Valves 3.7.3 SURVEILLANCE REQUIRMENTS (continued)
SURVEILLANCE FREQUENCY SR 3.7.3.2 --------------------NOTE----------------------
Only required to be performed in MODES 1 and 2.
Verify each actuator train actuates the MFIV to the 18 months isolation position on an actual or simulated actuation signal.
SR 3.7.3.3 ------------------------NOTE-----------------------
Only required to be performed in MODES 1 and 2.
Verify each MFRV and MFRV bypass valve actuates 18 months to the isolation position on an actual or simulated actuation signal.
Wolf Creek - Unit 1 3.7-11 Amendment No. 123, 171, 177
ARVs 3.7.4 3.7 PLANT SYSTEMS 3.7.4 Atmospheric Relief Valves (ARVs)
LCO 3.7.4 Four ARV lines shall be OPERABLE.
APPLICABILITY: MODES 1, 2, and 3.
ACTIONS CONDITION REQUIRED ACTION COMPLETION TIME A. One ARV line inoperable A.1 Restore required ARV line 7 days
~
for reasons other than to OPERABLE status.
excessive leakage.
B. Two ARV lines inoperable B.1 Restore all but one 72 hours8.333333e-4 days <br />0.02 hours <br />1.190476e-4 weeks <br />2.7396e-5 months <br /> for reasons other than required ARV line to excessive leakage. OPERABLE status.
C Three or more ARV lines C.1 Restore all but two ARV 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> inoperable for reasons lines to OPERABLE other than excessive status.
leakage.
(continued)
Wolf Creek - Unit 1 3.7-12 Amendment No. 123, 127, 155, 171, 177 I
