Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• 05000295/LER-1978-144, Forwards LER 78-144/03L-0  + (ML19261A812)
• 05000318/LER-1979-003-01, /01T-0 on 790120:during Normal operation,22A Lower Seal Temp Alarm Was Received & RCS Leak Rate Increased. Caused by Cracked Weld on 22A Lower Seal Pressure Sensing Line.Design Change Is in Progress  + (ML19261A814)
• 05000295/LER-1978-138-03, /03L-0 on 781224:during Normal Operation Component Cooling Liquid Radiation Monitor 1RE-0017 Failed Low & Was Taken Out of Svc.Cause Was Defective High Voltage Power Supply  + (ML19261A815)
• ML19261A816  + (ML19261A816)
• ML19261A817  + (ML19261A817)
• 05000295/LER-1978-144-03, /03L-0 on 780925:generator 1NM-441B Output Out of Tolerance;Low 2.5%.Caused by Instrument Drift Resulting in Nontolerance of Function Generator Model 113.Model Recalibrated & System Returned to Normal  + (ML19261A818)
• ML19261A819  + (ML19261A819)
• ML19261A820  + (ML19261A820)
• ML19261A821  + (ML19261A821)
• 05000295/LER-1978-027, Forwards LER 78-027/03X-1  + (ML19261A822)
• 05000295/LER-1978-140, Forwards LER 78-140/03L-0  + (ML19261A824)
• 05000295/LER-1978-027-03, /03X-1 on 780402:steam Flow Channel 1F522 Failed Low Due to Plugging of High Side Sensing of Transmitter While Sealing Valve Steam Leak.Valve Was Replaced  + (ML19261A826)
• 05000295/LER-1978-140-03, /03L-0 on 781227:steam Generator Pressure Channel 1P-546 Pegged High Several Times.Caused by Detuned Oscillator in Transmitter Model 50EP 1041BCXA.Oscillator Replaced & Sys Returned to Normal  + (ML19261A827)
• ML19261A828  + (ML19261A828)
• 05000254/LER-1978-033, Forwards LER 78-033/03L-0  + (ML19261A829)
• ML19261A832  + (ML19261A832)
• 05000265/LER-1978-039, Forwards LER 78-039/03L-0  + (ML19261A833)
• ML19261A834  + (ML19261A834)
• ML19261A835  + (ML19261A835)
• ML19261A836  + (ML19261A836)
• 05000254/LER-1978-033-03, /03L-0 on 781219:during Automatic Isolation of Ventilation Sys,Inlet Isolation Dampers 1-5741 a & B Failed to Close.Pilot Solenoid on Air Operator of Damper Valves Stuck & Failed to Supply Air Signal Needed to Close Valve  + (ML19261A837)
• 05000265/LER-1978-039-03, /03L-0 on 781218:test Results Found HPCI Initiation Switches Associated W/Drywell Pressure Instruments Not in Accordance W/Tech Specs.Caused by Procedural Inadequacy;Switches Excluded from Test Program  + (ML19261A838)
• ML19261A840  + (ML19261A840)
• ML19261A841  + (ML19261A841)
• ML19261A842  + (ML19261A842)

• 05000295/LER-1978-130, Forwards LER 78-130/99X-0  + (ML19261A843)

• ML19261A845  + (ML19261A845)
• ML19261A846  + (ML19261A846)
• 05000295/LER-1978-130-99, /99X-0 on 781205:two Safety Injections Ocurred from False Steam Pressure Differential Signals.False Signals Caused by Shocks from Water Hammers  + (ML19261A847)
• ML19261A848  + (ML19261A848)
• 05000295/LER-1979-003, Forwards LER 79-003/01T-0  + (ML19261A849)
• ML19261A851  + (ML19261A851)
• 05000295/LER-1979-003-01, /01T-0 on 790109:Westinghouse Results of Feb 1978 ECCS Model Analysis Determined That Fq Limit Should Be 1.86 Rather than the Current Limit of 2.02.Plant Operations Modified to Adhere to New Limit  + (ML19261A853)
• ML19261A854  + (ML19261A854)
• ML19261A855  + (ML19261A855)
• ML19261A860  + (ML19261A860)
• ML19261A862  + (ML19261A862)
• ML19261A863  + (ML19261A863)
• ML19261A864  + (ML19261A864)
• ML19261A866  + (ML19261A866)
• ML19261A867  + (ML19261A867)
• ML19261A868  + (ML19261A868)
• ML19261A869  + (ML19261A869)
• ML19261A871  + (ML19261A871)
• ML19261A876  + (ML19261A876)
• IR 05000336/2019010  + (ML19261A879)
• ML19261A883  + (ML19261A883)
• ML19261A885  + (ML19261A885)
• ML19261A892  + (ML19261A892)
• ND-19-0928, ITAAC Closure Notification on Completion of ITAAC 2.3.07.07b.vii (Index Number 881)  + (ML19261A894)
• ML19261A912  + (ML19261A912)