Search results

Interim 10 CFR 21.21(a)(2) Report Regarding Operation Technology, Inc. ETAP Software Error in Transient Stability Program On June 26, 2024, Operation Technology

include the entire UFSAR in portable document format (PDF), installation software that consists of Adobe Acrobat Reader (to access the PDF files), and an

VERIFICATION OF SOFTWARE 4.1. VERIFICATION OF SOFTWARE REQUIREMENTS 4.2 VERIFICATION OF NEW SOFTWARE DESIGN 4.3 VERIFICATION OF PREVIOUSLY DEVELOPED SOFTWARE 4.4 VERIFICATION

Electric and Gas Co. MCN47 PO Box 236 Hancock's Bridge, NJ 08038 C. Systems Software Specialist(s): Jack Southers Senior Engineer Public Service Electric and

NEl/NUSMG 97-07, Nuclear Utility Year 2000 Readiness. The program applies to software, hardware and firmware whose failure due to a Y2K problem would prevent

This software has been remediated and testing is underway but is not finished. The integrated testing is scheduled to be completed and the software is expected

Creek Nuclear Generating Station. of the July 1,1999 letter, listed two software systems (i.e., ETUDE and j REM /AACS/CICO) that remained to be remediated

include the entire UFSAR in portable document format (PDF), installation software that consists of Adobe Acrobat Reader (to access the PDF files), and an

planned ERDS software change scheduled to take place February 15,1999. ) 10CFR50 Appendix E, Section VI.3.b requires planned hardware and software modifications

program. TVA recognizes'that'as:the' software; change control: program' matures > improvements.will be made. The software.. change cont.rol; commitment" allows-for

components along with software required to process all other channels in the affected racks. However, all LCP code has completed software l verification testing

acronym for Significance Determination Process OR SDP is an acronym for Software Development Plan

design package (including Baseline % software) is expected from GENE on or about July 6,1999. The " Baseline 96" software package has been verified to be Year

documentation associated with the DFCS software. Personnel involved with the change were unfamiliar with the DFCS software design and were highly reliant upon

AP1000 Vogtle Unit 4 PMS Software Installation - Software Release 9.0.0.1 (Reference 11) and PMS Software Installation - Software Release 9.0.0.4 (Reference

revision of software code. This change was in. the test secuence. processor analog input calibration routine. The final version of the affected software has also

vendor software, networking software, real-time and batch programming software, telecommunications programming, process control and monitoring software, etc

discovered error in the software which ' produces the report, it has been determined that the data calculated by,the: software for the " Cumulative Joint

requirements. The staff also reviewed Westinghouse computer software requirements to ensure the software is in compliance with the ASME NQA 1 quality assurance

and office automation software required for access to the CEI network r I b) Intranet access software c) Telnet and IBM host software d) Data applications